Jost 5th Wheel Catalog

Fifth Wheel Catalog

FEATURES

FEATURE: -Locking bar engages regardless of adjustment

FEATURE: -Safe & Simple with only 4 moving parts BENEFIT: -Reliable Coupling

BENEFIT: -Fifth Wheel always locks

FEATURE: -Integral 2nd & 3rd lock

FEATURE: -High coupling lugs

BENEFIT: -Keeps lock secure

BENEFIT: -Decrease potential for improper coupling

FEATURE: -Easy pull handle

FEATURE: -Non-Metalli -Non-Metallic c cushion cushion ring

BENEFIT: -Reduce driver injury

BENEFIT: -Cushions -C ushions kingpin kingpin impact impact -Aids -Aids lubrication lubrication -Topplate fully rebuildable

60lbs

RevJ

FEATURE: -Simple adjustment with infinite positions

FEATURE: -Locks replaceable on tractor in 30min or less at 1/2 the cost.

BENEFIT: -Prov -P rovides ides a snug fit to to kingpin reducing impact and wear

BENEFIT: -Reduced vehicle down time -Reduce rebuild cost

FEATURES

FEATURE: -Locking bar engages regardless of adjustment

FEATURE: -Safe & Simple with only 4 moving parts BENEFIT: -Reliable Coupling

BENEFIT: -Fifth Wheel always locks

FEATURE: -Integral 2nd & 3rd lock

FEATURE: -High coupling lugs

BENEFIT: -Keeps lock secure

BENEFIT: -Decrease potential for improper coupling

FEATURE: -Easy pull handle

FEATURE: -Non-Metalli -Non-Metallic c cushion cushion ring

BENEFIT: -Reduce driver injury

BENEFIT: -Cushions -C ushions kingpin kingpin impact impact -Aids -Aids lubrication lubrication -Topplate fully rebuildable

60lbs

RevJ

FEATURE: -Simple adjustment with infinite positions

FEATURE: -Locks replaceable on tractor in 30min or less at 1/2 the cost.

BENEFIT: -Prov -P rovides ides a snug fit to to kingpin reducing impact and wear

BENEFIT: -Reduced vehicle down time -Reduce rebuild cost

TABLE OF CONTENTS

Pages

RevJ

TOPPLATE ASSEMBL IES

1-2

TOPPLATE PARTS Standard Model JSK 37U 37U Low Lube Model Model JSK 37U” 37U” W” Air Ai r Release Rel ease Com ponen po nents ts Replacement Replacement Model JSK 37H 37H Replacement Replacement Model JSK 37F 37F

3-7 3 4 5 6 7

TOPPLATE OPTIONS OPTIONS

8

SLIDING FIFTH WHEEL ASSEMBL IES Outboard Model Inboard Model

9-20 9-14 9-14 15-20 15-20

STATIONARY FIFTH WHEEL ASSEMBL IES Outboard Flat Plate Mount Outboard Plate Mount Inboard Angle Ang le Mount Bracket for Angle Mount Stationary Stationary Mounting Brackets

21-29 21-22 21-22 23-2 23-24 4 25-26 25-26 27-2 27-28 8 29

NO-TILT CONVERTIBL CONVERTIBLE E

30

FIFTH WHEEL ACCESSORIES Replacement Replacement Kit s Air Ai r Lin L in e Kits Ki ts Air Ai r Cyli Cy li nd ers

31-34 31 32-33 34

MOUNTING ACCESSORIES Hardw Hardware are Kit s Sliding Outboard Mounting Angle Stationary Stationary Inboard Mounting Angle Stationary Stationary Outboard Mounting Angle Corrugated Mounting Plate Plate

35-39 35 36 37 38 39

SERVICE TOOLS

40


PART NUMBER MASTER

TOPPLATE* Fifth Wheel Product Line Prefix

Topplate Style

Topplate Lube Type

Topplate Release Type

JSK

37U

__

__

Standard Lube Surface – S With Low Lube P lates – W Auto Lube (4 holes) – A

L - Left Hand Release R elease A - Air Release L eft Hand Retractable Retractable Handle B - Left

Example: JSK 37USL

DIMENSIONAL DIMENSIONAL INFORMATION INFORMATION

36.63 24.6

11.6 31.25 2.5 2.5

19.7

12.0 MIN. 13.5 MAX.

±.5

5.0 5.0

Unlocked

3.35 MIN 5.5 MAX.

Locked

*Pins, *Pins, bushings bushings & collars not included when when ordering 37U topplate only.

Page 1 RevJ

TOPPLATE

TOPPLATES

ASSEMB LIES

JSK 37U

Topplate Lube Type


Weight

Left Hand Release

240 lbs.

J SK 37USL

Page 3

Air Release**

246 lbs.

J SK 37USA

Page 5

Left Hand Retractable

242 lbs.

J SK 37USB

Page 3

Left Hand Release

242 lbs.

J SK 37UWL

Page 4

Air Release**

248 lbs.

J SK 37UWA

Page 4 & 5


244 lbs.

J SK 37UWB

Page 4

Left Hand Release

240 lbs.

J SK 37UAL

Page 3

Air Release**

246 lbs.

J SK 37UAA

Page 5


242 lbs.

J SK 37UAB

Page 3

Standard

With Low Lube Plates

Auto Lube (4 holes)

Model Number

Found on page #

** J ost International recommends that our manifold assembly kit be installed with the Air Release because it contains important safety interlock components (see pg. 33).

JSK 37H FIELD REPLACEMENT FOR HOLLAND™ TOPPLATES*

Topplate Lube Type

Standard Auto Lube (4 holes)


Weight

Left Hand Release

240 lbs.

J SK 37HSL

Page 6

Air Release**

246 lbs.

J SK 37HSA

Page 5 & 6

Left Hand Release

240 lbs.

J SK 37HAL

Page 6

Air Release**

246 lbs.

J SK 37HAA

Page 5 & 6

* The

Model Number

Found on page #

J SK37H topplate increases fifth wheel height by 3/4”.

JSK 37F FIELD REPLACEMENT TOPPLATE

Topplate Lube Type


Weight

Standard

Left Hand Release

240 lbs.

* The

Found on page #

J SK 37FSL

J SK37F topplate increases fifth wheel height by 5/16”.

Page 2 RevJ

Model Number

Page 7


JSK37U 25

1

SK 79002-00

24

2

See page 5 for air release components

23

3

See page 8 for topplate options

4

RIGHT HAND RELEASE

SK 75014-03

22

(Bushings Only)

13R 16R

SK 75014-01

6

5

7 9

18R

21 20

8

LEFT HAND RETRACTABL E HANDLE

19

SK 71005-07 (spring only)

18 10

17

11 12

REBUILD PROCEDURES

SK 75016-00

16

15 13

13B

SK 72953-01

INSTALLATION INSTRUCTIONS OPERATION INSTRUCTIONS MAINTENANCE PROCEDURES

14

26

27

SK 75013-20

Item 1 2 3 4 5 6 7 8 9 10 11 12 13 13B 13R 14

Descrip tion Cushion ring bolt Retainer Cushion ring insert Lock jaw pivot pin Collar Bushing Bracket pin Tab washer 1/2-13 x 3/4 lg. Hex bolt Plate spring External tooth lock washer Hex bolt LH Release handle Retractable Handle w/spring RH Release handle Pivot bolt assembly

Part No.

Item

SK 73121-55 SK 3105-93 SK 3105-92 SK 72106-67 SK 3105-95 SK 2905-94 SK 79011-03 SK 73104-47 SK 70202-15 SK 70993-00 SK 70301-00 SK 73121-28B SK 73105-15 SK 75016-04 SK 79009-27 SK 71513

15 16 16R 17 18 18R 19 20 21 22 23 24 25 26 27

Major Rebuild Kit Complete Topplate

Left Hand L.H. Retractable Right Hand RevJ

Order Number

SK 75013-00 SK 75013-09 SK 75013-01

Locking bar bolt assembly LH Lever with bushing RH Lever with bushing Locking bar LH Lock jaw RH Lock jaw Lock jaw spring Eye bolt Ring Guide piece Adjusting screw with hex nut Double tension spring Lubricating kit Rebuild Procedures Info Pack

Part No. SK 73221-01 SK 3105-140 SK 3105-18 SK 3205-06 SK 1489LZ SK 1489Z SK 847 SK 2106-69 SK 2106-70 SK 73205-07 SK 3105-151 SK 3105-20 SK 3108-02 LT J SK37-03 SK 75020-01

Minor Rebuild Kit (see pg. 31) Cushion and Lock Jaw

Includes Items 1-26 above Release Type

Descrip tion

Includes Items 1-4, 18-21 & 25 above Weight

33 lbs. 35 lbs. 33 lbs. Page 3

Order Number

Weight

SK 73221-50Z

6 lbs.

SK 75013-02

6 lbs.


JSK37U” W” LOW LUBE 25 1

SK 79002-00

24

2 See page 5 for air release components

3

29

4

23


28

RIGHT HAND RELEASE

SK 75014-03 (Bushings Only)

22

13R

SK 75014-01

16R

5 7 9

18R

6 21

8

LEFT HAND RETRACTABL E HANDLE

20

SK 71005-07

19 10

(spring only)

18

11 12

13B

17

SK 72953-01

SK 75016-00 REBUILD PROCEDURES

15 13 Item 1 2 3 4 5 6 7 8 9 10 11 12 13 13B 13R 14

Descrip tion Cushion ring bolt Retainer Cushion ring insert Lock jaw pivot pin Collar Bushing Bracket pin Tab washer 1/2-13 x 3/4 lg. Hex bolt Plate spring External tooth lock washer Hex bolt LH Release handle Retractable Handle w/spring RH Release handle Pivot bolt assembly

16


14

Part No.

Item

SK 73121-55 SK 3105-93 SK 3105-92 SK 72106-67 SK 3105-95 SK 2905-94 SK 79011-03 SK 73104-47 SK 70202-15 SK 70993-00 SK 70301-00 SK 73121-28B SK 73105-15 SK 75016-04 SK 79009-27 SK 71513

15 16 16R 17 18 18R 19 20 21 22 23 24 25 26 27 28 29

Descrip tion Locking bar bolt assembly LH Lever with bushing RH Lever with bushing Locking bar LH Lock jaw RH Lock jaw Lock jaw spring Eye bolt Ring Guide piece Adjusting screw with hex nut Double tension spring Lubricating kit Rebuild Procedures Info Pack Low lube liner plates Securing bolt

Includes items 28 & 29 (see pg. 31) Order Number

SK 3106-003 RevJ

27

SK 75013-20

Low Lube Plate Replacement Kit

See page 3 for rebuild kits

26

Page 4

Weight

6 lbs.

Part No. SK 73221-01 SK 3105-140 SK 3105-18 SK 3205-06 SK 1489LZ SK 1489Z SK 847 SK 2106-69 SK 2106-70 SK 73205-07 SK 3105-151 SK 3105-20 SK 3108-02 LT J SK37-03 SK 75020-01 SK 3105-129 SK 0010060


AIR RELEASE 1

30

2

29

28

3

SK 75014-02 JSK37H

4 5H 7H

9H

27

8

26W

Low Lube only JSK37UW

5 22

6

21

7 8

23

9

20 or 20w 19

24 SK 71005-07

25

(spring only)

18 17

SK 75014-01 Standard JSK37U & Low Lube JSK37UW

16 10

SK 75014-03

15

14 13

32 Standard J SK37U 32w Low Lube JSK37UW 32H JSK37H

12

1 2 3 4 5 5H 6 7 7H 8 9 9H 10 11 12 13 14 15 16

Descrip tion Cushion ring bolt Retainer Cushion ring insert Lock jaw pivot pin Collar (J SK37U) Collar (J SK37H) Rubber Bushing Bracket pin (J SK37U) Bracket Pin (J SK37H) Tab washer 1/2-13 x 3/4 lg. Hex bolt (J SK37U) 3/8-16 x 3/4 lg. Hex bolt (J SK37H) Retractable handle w/spring Pivot bolt assembly Locking bar bolt assembly LH Lever w/chamfer Locking bar LH Lock jaw Lock jaw spring

Part No.

Item

Descri ption

SK-73121-55 SK-3105-93 SK-3105-92 SK-72106-67 SK-3105-95 SK-73105-95 SK-2905-94 SK-79011-03 SK-73104-05 SK-73104-47 SK-70202-15 SK-73121-28B SK-75016-04 SK-71513 SK-73221-01 SK-3105-140 SK-3205-06 SK-1489LZ SK-847

17 18 19 20 20w 21 22 23 24 25 26w 27 28 29 30 32 32w 32H

Eye bolt Ring Air cylinder (see pg. 34) 3/8-16 x 1/2 lg. Low hd scr. (37H&37U) 3/8-16 x 3/4 lg. Low hd scr. (Low Lube) 3/8 dia. Clevis pin (long) Cylinder mount 3/8 dia. Clevis pin (short) Cylinder clevis Flat washer Cylinder mount spacer (Low Lube only) Guide piece Adjusting screw with hex nut Double tension spring Lubricating kit Info pack (standard J SK37U) Info pack (standard J SK37UW) Info pack (standard J SK37H)

Major Rebuild Kit Complete Topplate

37U 37H 37UW RevJ

Order Number

SK 75013-16 SK 75013-18 SK 75013-19

Part No. SK-2106-69 SK-2106-70 SK-79020-04 SK-70209-00 SK-73121-55 SK-70105-00 SK-79020-05 SK-70105-01 SK-79020-06 SK-70302-01 SK-79020-11 SK-73205-07 SK-3105-151 SK-3105-20 SK-3108-02 SK 75020-09 SK-75020-12 SK-75020-14

Minor Rebuild Kit (see pg. 31) Cushion and Lock Jaw

Includes Items 1-30 above

Topplate


11

JSK37U Bushing Kit (Bushings Only)

Item

SK 72953-01

Includes Items 1-4, 15-18 & 30 above

Weight

33 lbs. 35 lbs. 33 lbs. Page 5

Order Number

SK 73221-50Z

Weight

6 lbs.


JSK37H FIELD REPLACEMENT FOR HOLLAND™ TOPPLATES

24

1

SK 79002-00

23

2 See page 5 for air release components

3 4


22 21

SK 75014-02

5 6 20

7 8

19 18

SK 72953-01

17 9

10 11

16

REBUILD PROCEDURES

25

SK 75016-00

15

14 13

12

SK 75013-20

Item 1 2 3 4 5 6 7 8 9 10 11 12 13

Descrip tion Cushion ring bolt Retainer Cushion ring insert Lock jaw pivot pin Collar Bracket pin Tab washer Hex bolt Plate spring External tooth lock washer Hex bolt Release handle Pivot bolt assembly

Part No.

Item

SK 73121-55 SK 3105-93 SK 3105-92 SK 72106-67 SK 73105-95 SK 73104-05 SK 73104-47 SK 73121-28B SK 70993-00 SK 70301-00 SK 73121-28B SK 73105-15 SK 71513

14 15 16 17 18 19 20 21 22 23 24 25 26

26 Descrip tion

Part No.

Locking bar bolt assembly Lever with bushing Locking bar Lock jaw Lock jaw spring Eye bolt Ring Guide piece Adjusting screw with hex nut Double tension spring Lubricating kit Rebuild Procedures Info Pack

SK 73221-01 SK 3105-140 SK 3205-06 SK 1489LZ SK 847 SK 2106-69 SK 2106-70 SK 73205-07 SK 3105-151 SK 3105-20 SK 3108-02 LT J SK37-03 SK 75020-00

Major Rebuild Kit Complete Topplate – L.H. Only

Minor Rebuild Kit (see pg. 31) Cushion and Lock Jaw – L.H. Only



Order Number

SK 73221-52Z

Weight

Order Number

33 lbs.

SK 73221-50Z

Page 6 RevJ


Weight

6 lbs.


JSK37F FIELD REPLACEMENT TOPPLATE

24

1

SK 79002-00

23

2 3 4

22 21 SK 75014-07

5 6

20

7

19

8

18

SK 72953-01

17 9 16

10 11

REBUILD PROCEDURES

25

SK 75016-00

14

13

12


15 26

SK 75013-20

Item 1 2 3 4 5 6 7 8 9 10 11 12 13

Descrip tion Cushion ring bolt Retainer Cushion ring insert Lock jaw pivot pin Collar Bracket pin Tab washer 1/2-13 x 3/4 lg. Hex bolt Release handle plate spring Lock washer 3/8-16 Hex bolt LH Release handle Pivot bolt assembly

Part No.

Item

SK 73121-55 SK 3105-93 SK 3105-92 SK 72106-67 SK 79048-02 SK 79011-12 SK 73104-47 SK 70202-15 SK 70993-00 SK 70301-00 SK 73121-28B SK 73105-15 SK 71513

14 15 16 17 18 19 20 21 22 23 24 25 26

Part No.

Locking bar bolt assembly LH Lever with bushing Locking bar LH Lock jaw Lock jaw spring Eye bolt Ring Guide piece Adjusting screw with hex nut Double tension spring Lubricating kit Rebuild Procedures Info Pack

SK 73221-01 SK 3105-140 SK 3205-06 SK 1489LZ SK 847 SK 2106-69 SK 2106-70 SK 73205-07 SK 79010-07 SK 3105-20 SK 3108-02 LT J SK37-03 SK 75020-15

Major Rebuild Kit Complete Topplate – L.H. Only

Minor Rebuild Kit (see pg. 31) Cushion and Lock Jaw – L.H. Only



Order Number

SK 75013-14

Weight

Order Number

33 lbs.

SK 73221-50Z

Page 7 RevJ

Descrip tion

Weight

6 lbs.

TOPPLATE OPTIONS

TOPPLATE

Extended Handle Topplate Style

Order Number*

Standard L.H. Release Low Lube L.H. Release Holland™ Replacement Topplate

J SK 37001 J SK 37002 Release Handle extended to improve accessibility when using fenders.

J SK 37003

Option is available with all mounting configurations.

Weight

242 lbs. 244 lbs. 242 lbs.

Internal Adjus tment Order Number*

Standard L.H. Release Standard Air Release Holland™ Replacement Topplate

J SK 37015 Adjustment Screw located under the Topplate to hide from view and avoid Kingpin damage when a miscouple occurs.

Topplate Style

J SK 37020

Option is available with all mounting configurations.

J SK 37017

Weight

240 lbs. 246 lbs. 240 lbs.

Drop Handle & Internal Adju stment Order Number*

J SK 37010

Topplate Style

Weight

Standard L.H. Release

240 lbs.

Release handle lowered and Adjustment Screw located under the Topplate to avoid Kingpin damage when a miscouple occurs. Option is only available with stationary mounts above 6” high (see page 29).

Front Release Order Number*

J SK 37009 J SK 37012 J SK 37013

Release handle located in the front of the fifth wheel.

Topplate Style

Weight

Auto Lube Standard Low Lube

240 lbs. 246 lbs. 242 lbs.

Option is only available with stationary mounts above 6” high (see page 29).

*Pins, bushings & collars not included when ordering the topplate only.

*Order numbers listed are for topplate assemblies only. To order fifth wheel assemblies add the desired mounting configuration number to the end of the topplate assembly (Example: J SK 37001-A7PX24).

RevJ

Page 8

OUTBOARD MOUNT

SLIDING FIFTH WHEEL

AIR SLIDER

ASSEMB LIES

Slide mechanism locked

Slide mechanism unlocked

CAPACITY:

50,000 maximum vertical load. 150,000 maximum drawbar pull. FEATURES:

RevJ

¾

MADE IN U.S.A. – BY

¾

Allows adjustment for vehicle combination lengths and tractor axle load distribution.

¾

Lightweight high strength low alloy construction that allows you to maximize payloads.

¾

Maintenance free construction allows for maximum equipment utilization.

¾

Slide travel is adjustable in 2” increments for precise positioning of fifth wheel.

¾

Release mechanism features an in-line secondary lock, assures positive, safe locking.

¾

Available in popular heights and slide travels.

¾

Automatic spring loaded adjustment of locking plungers.

¾

Composite cylinder and rod for long trouble free life.

¾

Maintenance-free pivot eliminates routine lubrication requirements.

¾

Upshock cushion reduces impact and provides torsional relief between tractor and trailer.

Page 9

OUTBOARD MOUNT AIR SLIDER

SLIDING FIFTH WHEEL ASSEMBL IES

TOPPLATE

SLIDE BRACKET

(See Page 1)

(See Page 13)

Fifth Wheel Product Line Prefix

Topplate Style

Topplate Lube Type


Art ic ul ati on

JSK

37U

__

__

__

Slider Style

**6.75” 7.75” 8.75” **9.75” **10.75”

Left Hand Release – L **Air Release – A **Left Hand Retractable Handle – B

Slide Release

Travel Options*

Slide Travel

P

__

__

__

– – – – –

Standard – Leave Blank **No-Tilt Convertible – N ** No-Tilt Convertible option is not available with 7”, 10” or 11” height Slide Brackets, with the Retractable Handle Release or Air release. See page 30 for details.

(See Page 14)

Height

A

Standard Lube Surface – S With Low Lube Plates – W Auto Lube (4 holes) – A

SLIDE PLATE

12 – 16 – 24 – 36 – 48 –

7 8 9 10 11

X – None A – Travel minus 8" B – Travel minus 10" C – Travel minus 12” D – Travel minus 14” Etc…

Pneumatic – P

*Travel options restrict the forward travel as described above using a removable stop. For a fixed weld in stop specify “X” and select the desired travel length from the chart below.

Examp le: JSK 37USL-A7PX24

DIMENSIONAL INFORMATION “L” “A” Spaces @ 4.0 =“B”

5.0 ±.5 39.25 12.0 Min. 13.5 Max. 37.25

“C” Bolts Req’d To Mount (See Page 35) 2.91

10.7

“T” 11.6

19.7 5 Min.

10 Min.

“T” =Slide Travel

RevJ

Bolt Pattern

Dim “T” Travel

Dim “L” Length

“A”

“B”

“C”

12”

40 ¼”

9

36”

20

16”

44 ¼”

10

40”

22

24”

52 ¼”

12

48”

26

36”

64 ¼”

15

60”

32

48”

76 ¼”

18

72”

38

Weld in Slide Stops Original Travel 12” 16” 24” 36” 10 14 22 34 Available 08 20 32 Reduced 06 18 30 Travel 28 Options 26

48” 46 44 42 40 38

Examp le: JSK 37USL-A7PX08 12” travel slider restricted to 8” of forward travel

8

Height =6.75, 7.75, 8.75, 9.75 or 10.75

“L” =Overall Length =Length of Mounting Angle (See Page 36)

Page 10

12” 16” 24” 36” 48”

Travel

12”

16”

24”

36”

48”

OUTBOARD MOUNT

SLIDING FIFTH WHEEL

AIR SLIDER

ASSEMB LIES

Height

Weight

6.75

457 lbs.

J SK 37USL-A7PX12

Low Lube Plates

7.75

462 lbs.

J SK 37USL-A8PX12

Low Lube Plates

8.75

468 lbs.

J SK 37USL-A9PX12

9.75

490 lbs.

J SK 37USL-A10PX12

10.75

501 lbs.

J SK 37USL-A11PX12

6.75

465 lbs.

J SK 37USL-A7PX16

7.75

470 lbs.

J SK 37USL-A8PX16

8.75

476 lbs.

J SK 37USL-A9PX16

9.75

498 lbs

J SK 37USL-A10PX16

10.75

509 lbs.

J SK 37USL-A11PX16

6.75

479 lbs.

J SK 37USL-A7PX24

7.75

484 lbs.

J SK 37USL-A8PX24

8.75

490 lbs.

J SK 37USL-A9PX24

9.75

512 lbs.

J SK 37USL-A10PX24

10.75

523 lbs.

J SK 37USL-A11PX24

6.75

501 lbs.

J SK 37USL-A7PX36

7.75

506 lbs.

J SK 37USL-A8PX36

8.75

512 lbs.

J SK 37USL-A9PX36

9.75

534 lbs.

J SK 37USL-A10PX36

10.75

545 lbs.

J SK 37USL-A11PX36

6.75

523 lbs.

J SK 37USL-A7PX48

7.75

528 lbs.

J SK 37USL-A8PX48

8.75

534 lbs.

J SK 37USL-A9PX48

9.75

556 lbs.

J SK 37USL-A10PX48

10.75

567 lbs.

J SK 37USL-A11PX48

Model Number †

† Model numbers shown have standard topplate, left hand release and air slide.

RevJ

Page 11

Change “S” to “W” e.g. J SK 37UWL-A7PX24

Auto Lube Drilled & Tapped 1/8 NPT (4) Holes

Change “S” to “A” e.g. J SK 37UAL-A7PX24

Air Release

Change “L” to “A” e.g. J SK 37USA-A7PX24



Ai r c yl in der no t inc lu ded , order SK 75015-03 (see pg. 34)

**Slide Plate As sem bl y

*Slide Bracket As sem bl y

**Slide Plate Assembly is available in standard travel lengths: 12”, 16”, 24”, 36”, 48”. See chart below for order numbers and see page 14 for details.

*Slide Bracket Assembly is available in fifth wheel heights: 7”, 8”, 9”, 10” or 11”. See chart below for order numbers and see page 13 for details.

To Order Slide Bracket Assembly Only Order Number

A7P A8P A9P A10P A11P

To Order Slide Plate Assembly Only

Height

Order Number

7” F.W. Height 8” F.W. Height 9” F.W. Height 10” F.W. Height 11” F.W. Height

X12 X16 X24 X36 X48

Page 12 RevJ

Travel

12” Travel 16” Travel 24” Travel 36” Travel 48” Travel



Slide Bracket Assembl y 10

5

12

2

9

4

3 6

15 12 9 4

12 14

7 2

7 12 13

11

8

11

1*

Item

Descrip tion

Part No.

Item

Descrip tion

Part No.

1 2 3 4 5 6 7 8

Slide bracket* Spring Pivot Arm Pivot Linkage Double Coil Spring 1/2-13 Lock Nut 3/8 Dia.x 3/4 Shoulder Screw Flanged Bearing

SK 77001-xx SK 77293-00 SK 77289-00 SK 77290-00 V2026100 SK 70402-04 SK 70201-09 SK 77292-00

9 10 11 12 13 14 15

5/16-18 Lock Nut Cylinder Assembly (see pg 34) Plunger Flat Washer Cotter Pin 3/8 Dia. Clevis Pin Flat Washer

SK 70402-01 SK 75015-03 SK 77007-01 SK 70302-05 SK 70101-01 SK 70102-00 SK 70302-02

*Item #1 available in fifth wheel heights: 7”, 8”, 9”, 10” or 11”. Replace XX in part number with appropriate height (e.g. SK 77001-08).

RevJ

Page 13



Slide Plate Assembl y

1*

2

Item 1

Descrip tion Slider weldment*

Part No.

Item

SK 77037-xx

2

Descrip tion Rear Stop

*Item #1 available in travel lengths: 12”, 16”, 24”, 36” & 48”. Replace XX in part number with appropriate length (e.g. SK 77037-12).

RevJ

Page 14

Part No. SK 77041

INBOARD MOUNT

SLIDING FIFTH WHEEL

AIR SLIDER

ASSEMB LIES

Slide mechanism locked

Slide mechanism unlocked CAPACITY:

50,000 maximum vertical load. 150,000 maximum drawbar pull. FEATURES: ¾


¾

Allows adjustment for vehicle combination lengths and tractor axle load distribution.

¾

Patented integral mounting angle design eliminates additional mounting angle weight.

¾

Lightweight high strength low alloy construction (up to 120 lbs. lighter than competitive models) that allows you to maximize payloads.

¾

Maintenance free construction allows for maximum equipment utilization.

¾

Slide travel is adjustable in 2” increments for precise positioning of fifth wheel.

¾

Fully adjustable for all frame widths.

¾

Release mechanism features an in-line secondary lock, assures positive, safe locking.

¾

Available in popular heights and slide travels.

¾

Automatic spring-loaded adjustment of locking plungers.

¾

Composite cylinder and rod for long trouble free life.

¾


¾


¾

Removable/Repositionable slide stops that allow for easy: Removal of slide bracket. Limitation of slide travel for special applications. ¾ ¾

RevJ

Page 15

INBOARD MOUNT AIR SLIDER


TOPPLATE

SLIDE BRACKET

SLIDE RAIL

(See Page 1)

(See Page 13)

(See Page 14)


Topplate Style

Topplate Lube Type


Art ic ul ati on

Slider Style

JSK

37U

__

__

__

B

Standard Lube Surface – S With Low Lube Plates – W Auto Lube (4 holes) – A

Height

Slide Release

Travel Options*

Slide Travel

P

__

__

__

**6.75” **7.75” 8.75” **9.75”

– – – –

Left Hand Release – L **Air Release – A **Left Hand Retractable Handle – B

7 8 9 10

C – 33 1/2” E – 33 3/4” F – 33 7/8” G – 34” H – 34 1/8” J – 34 1/4”

Pneumatic – P

Standard – Leave Blank **No-Tilt Convertible – N

** No-Tilt Convertible option is only available with 9” height Slide Bracket and with the Left Hand Release. See page 30 for details.

Examp le: JSK 37USL-B7PG24

DIMENSIONAL INFORMATION “L”

5.0 ±.5

12.0 Min. 13.5 Max.

Dim “L” Length

“A”

12”

41”

10

18”

47”

12

24”

53”

14

36” 48”

65” 77”

18 22

13.06

“T” 11.6 2.91

Dim “T” Travel

19.7

10 Min.

5 Min. 8

Height =6.75, 7.75, 8.75 or 9.75

Bolt pattern specified by customer “A” Bolts Min. Req’d To Mount (See Page 35)

“T” =Slide Travel

RevJ

“L” =Overall Length

Page 16

12 – 18 – 24 – 36 – 48 –

12” 18” 24” 36” 48”

INBOARD MOUNT

SLIDING FIFTH WHEEL

AIR SLIDER

ASSEMB LIES

Low Lube Plates Low Lube Plates

Travel

12”

18”

24”

36”

48”

†

Height

Weight

6.75

473 lbs.

J SK 37USL-B7PG12

7.75

479 lbs.

J SK 37USL-B8PG12

8.75

483 lbs.

J SK 37USL-B9PG12

9.75

489 lbs.

J SK 37USL-B10PG12

6.75

481 lbs.

J SK 37USL-B7PG18

7.75

487 lbs.

J SK 37USL-B8PG18

8.75

491 lbs.

J SK 37USL-B9PG18

9.75

497 lbs.

J SK 37USL-B10PG18

6.75

499 lbs.

J SK 37USL-B7PG24

7.75

505 lbs.

J SK 37USL-B8PG24

8.75

509 lbs.

J SK 37USL-B9PG24

9.75

515 lbs.

J SK 37USL-B10PG24

6.75

524 lbs.

J SK 37USL-B7PG36

7.75

530 lbs.

J SK 37USL-B8PG36

8.75

534 lbs.

J SK 37USL-B9PG36

9.75

540 lbs.

J SK 37USL-B10PG36

6.75

549 lbs.

J SK 37USL-B7PG48

7.75

555 lbs.

J SK 37USL-B8PG48

8.75

559 lbs.

J SK 37USL-B9PG48

9.75

565 lbs.

J SK 37USL-B10PG48

Model Number ‡

† Weight includes mounting angles. ‡ Model numbers shown have standard topplate, left hand release, air slide and

34” frame width.

Page 17 RevJ

Change “S” to “W” e.g. J SK 37UWL-B7PG24


Change “S” to “A” e.g. J SK 37UAL-B7PG24

Air Release

Change “L” to “A” e.g. J SK 37USA-B7PG24

Frame Width

C =33 1/2 E =33 3/4 F =33 7/8 G =34 H =34 1/8 J =34 1/4 For other frame widths, change “G” to appropriate letter above. e.g. J SK 37USL-B7PC24



Ai r c ylin der no t i nc lu ded , or der SK 75015-03 (see pg. 34)

**Slide Rail As sem bl y

*Slide Bracket As sem bl y

**Slide Rail Assembly is available in standard travel lengths: 12”, 18”, 24”, 36”, 48”. See chart below for order numbers and see page 20 for details.

*Slide Bracket Assembly is available in fifth wheel heights: 7”, 8”, 9” or 10”. See chart below for order numbers and see page 19 for details.

To Order Slide Bracket Assembly Only Order Number

B7P B8P B9P B10P

RevJ

To Order Slide Rail As sembly Only

Height

Order Number

7” F.W. Height 8” F.W. Height 9” F.W. Height 10” F.W. Height

SK 75039-12 SK 75039-18 SK 75039-24 SK 75039-36 SK 75039-48

Page 18

Travel

12” Travel 18” Travel 24” Travel 36” Travel 48” Travel



Slide Bracket Assembl y 16

8 22 6

19

11

15

12 13

7

9

5

10 5

20

7

5 12

6

3

4

15 17

2

14

11

21 5

10 9

5

8

14

18

4

*1 2 3 Item 1 2 3 4 5 6 7 8 9 10 11

Descrip tion Slide bracket* 3/4-10 J am nut 3/4-10 Hex head bolt (full thread) 3/8-16 Lock nut Flat washer 3/8-16 Hex head bolt Spring bracket Plunger Spring 3/4-16 J am nut Plunger screw

Part No. SK 77240-xx SK 70403-05 SK 70207-01 SK 70402-00 SK 70302-05 SK 70202-05 SK 77238-00 SK 77233-01 SK 77293-00 SK 70403-01 SK 77234-00

Item 12 13 14 15 16 17 18 19 20 21 22

Descrip tion 5/16-18 Lock nut Pivot Arm 3/8 Dia. x 3/4 shoulder screw Pivot linkage Cylinder Assembly (see pg. 34) 3/8 Dia. clevis pin Cotter pin 1/2-13 Lock nut Flat washer Flanged bearing Double Coil Spring

*Item #1 available in fifth wheel heights: 7”, 8”, 9” or 10”. Replace XX in part number with appropriate height (e.g. SK 77240-08).

RevJ

Page 19

Part No. SK 70402-01 SK 77289-00 SK 70201-09 SK 77290-00 SK 75015-03 SK 70102-00 SK 70101-01 SK 70402-04 SK 70302-02 SK 77292-00 V2026100



Slide Rail Assembl y

6 *1

5 4 2 3

*1

Item 1 2 3

Descrip tion Slide Rail* (1) side only Clamp Clamp Plate

Part No. SK 77275-xx SK 77220-00 SK 77222-00

Item 4 5 6

Descrip tion Cross Brace 3/8-16 x 1 3/4 Lg. Hex Bolt 3/8-16 x 1 1/4 Lg. Hex Bolt

*Item #1 available in travel lengths: 12”, 18”, 24”, 36” & 48”. Replace XX in part number with appropriate length (e.g. SK 77275-12).

RevJ

Page 20

Part No. SK 77221-00 SK 70202-06 SK 70202-05

OUTBOARD FLAT PLATE MOUNT

STATIONARY FIFTH WHEEL ASSEMBL IES

CAPACITY:



¾

Heavy-duty brackets constructed of high strength low alloy material combine durability with lightweight.

¾


¾


PART NUMBER TOPPLATE

BRACKET (See Page 29)

(See Page 1)


Topplate Style

Topplate Lube Type


Art ic ul ati on

Bracket Style

Height

Frame Width

JSK

37U

__

__

__

DB

__

X

6 – 5.85” * 7 – 6.85” * 8 – 7.85” 9 – 8.85” 10 – 9.85” * 11 – 10.85” *

Standard Lube Surface – S With Low Lube Plates – W Auto Lube (4 holes) – A Left Hand Release – L † Air Release – A † Left Hand Retractable Handle – B

Leave Blank – Standard N – No-Tilt Convertible*†

† No-Tilt Convertible option is not available with

* No-Tilt Convertible option is available with 8” or 9” height Brackets only.

the Retractable Handle Release or Air Release. See page 30 for details.

Example: JSK 37USL-DB6X

RevJ

Page 21

OUTBOARD FLA T

STATIONARY FIFTH WHEEL

PLA TE MOUNT

ASSEMB LIES

DIMENSIONAL INFORMATION

Low Lube Plates

18.5

Low Lube Plates

9.25

(10) Holes For 5/8 Bolts (See P age 35)

4.0 Typ.

5.0 ±.5

12.0 Min. 13.5 Max.

40.0

37.25

Change “S” to “W” e.g. J SK 37UWL-DB6X


11.6 2.91

19.7 5° Min.

10° Min.

8°

Height =5.85, 6.85, 7.85, 8.85, 9.85 or 10.85

Change “S” to “A” e.g. J SK 37UAL-DB6X

.31

Air Release

Height

*

Weight

Model Number †

6”

317 lbs.

J SK 37USL-DB6X

7”

319 lbs.

J SK 37USL-DB7X

8”

323 lbs.

J SK 37USL-DB8X

9”

328 lbs.

J SK 37USL-DB9X

10”

372 lbs.

J SK 37USL-DB10X

11”

385 lbs.

J SK 37USL-DB11X

* Nominal height shown, for actual height see line drawing above. † Model numbers shown have standard topplate and left hand release.

RevJ

Page 22

Change “L” to “A” e.g. J SK 37USA-DB6X

OUTBOARD PLATE MOUNT


CAPACITY:



¾


¾


¾



BRACKET

(See Page 1)

(See Page 29)


Topplate Style

Topplate Lube Type


Bracket Style

Height

Frame Width

JSK

37U

__

__

PM

__

X

Standard Lube Surface – S With Low Lube Plates – W Auto Lube (4 holes) – A Left Hand Release – L Air Release – A Left Hand Retractable Handle – B

Example: JSK 37USL-PM6X

RevJ

Page 23

6– 7– 8– 9–

5.85” 6.85” 7.85” 8.85”

OUTBOARD FLA T


PLA TE MOUNT

ASSEMB LIES


Low Lube Plates

18.0 .65 x 1.75 Slot For 5/8 Bolts (See P age 35)

Low Lube Plates

9.0 8.0 Typ.

5.0 ±.5

12.0 Min. 13.5 Max.

39.75

Change “S” to “W” e.g. J SK 37UWL-PM6X CENTERLINE 37.88 MAX. 35.75 MIN.


8.5

5.44 TYP .

11.6 2.91

19.7 5 Min.

10 Min. 8

Height =5.85, 6.85, 7.85 or 8.85

Change “S” to “A” e.g. J SK 37UAL-PM6X

.31

Air Release Note: For corrugated mounting plate, see page 39. Height *

Weight

Model Number †

6”

300 lbs.

J SK 37USL-PM6X

7”

304 lbs.

J SK 37USL-PM7X

8”

309 lbs.

J SK 37USL-PM8X

9”

313 lbs.

J SK 37USL-PM9X


RevJ

Page 24

Change “L” to “A” e.g. J SK 37USA-PM6X

INBOARD ANGL E MOUNT


CAPACITY:



¾


¾


¾



BRACKET

(See Page 1)

(See Page 29)


Topplate Style

Topplate Lube Type


Bracket Style

Height

Frame Width

JSK

37U

__

__

AM

__

__


Example: JSK 37USL-AM6G RevJ

Page 25

6– 7– 8– 9–

5.91” 6.91” 7.91” 8.91”

C – 33 1/2” E – 33 3/4” F – 33 7/8” G – 34” H – 34 1/8” J – 34 1/4”

INBOARD


ANGL E MOUNT

ASSEMB LIES



36.0 18.0 .38 4.0 5.0 ±.5

‡

C =33 1/2 E =33 3/4 F =33 7/8 G =34 H =34 1/8 J =34 1/4

12.0 Min. 13.5 Max.

Change “S” to “W” e.g. J SK 37UWL-AM6G


4.0 .38

11.6 2.91

19.7 5 Min.

10 Min. 8

Height =5.91, 6.91, 7.91 or 8.91

4.0

Change “S” to “A” e.g. J SK 37UAL-AM6G

Air Release

‡ For other frame widths change “G” to appropriate letter shown. e.g. J SK 37USL-AM6C

Height *

Weight

Model Number †

6”

334 lbs.

J SK 37USL-AM6G

7”

338 lbs.

J SK 37USL-AM7G

8”

343 lbs.

J SK 37USL-AM8G

9”

347 lbs.

J SK 37USL-AM9G

* Nominal height shown, for actual height see line drawing above. † Model numbers shown have standard topplate, left hand release

and 34” frame width.

Page 26 RevJ

Change “L” to “A” e.g. J SK 37USA-AM6G

BRACKET FOR ANGL E MOUNT


CAPACITY:



¾


¾


¾



BRACKET

(See Page 1)

(See Page 29)


Topplate Style

Topplate Lube Type


Bracket Style

Height

Frame Width

JSK

37U

__

__

XM

__

X


Example: JSK 37USL-XM6X RevJ

Page 27

6– 7– 8– 9–

5.54” 6.54” 7.54” 8.54”

BRACKET FOR


ANGL E MOUNT

ASSEMB LIES



13.8

3.9

5.0 ±.5

12.0 Min. 13.5 Max.

34.0

Change “S” to “W” e.g. J SK 37UWL-XM6X


3.9

19.7

11.6 2.91

5 Min.

10 Min. 8

Height =5.54, 6.54, 7.54 or 8.54

Change “S” to “A” e.g. J SK 37UAL-XM6X

Air Release Height *

Weight

Model Number †

6”

275 lbs.

J SK 37USL-XM6X

7”

279 lbs.

J SK 37USL-XM7X

8”

284 lbs.

J SK 37USL-XM8X

9”

288 lbs.

J SK 37USL-XM9X Change “L” to “A” e.g. J SK 37USA-XM6X


RevJ

Page 28

STATIONARY MOUNTING BRACKETS


Outboard Flat Plate Mounting Bracket * Order Number

DB6X DB7X DB8X DB9X

Height


Outboard Plate Mount Mounting Bracket * Order Number

PM6X PM7X PM8X PM9X

Height


Inboard Angle Mounting Bracket * Order Number

AM6G** AM7G** AM8G** AM9G**

Height


**For other frame widths change “G” to appropriate shown on page 25. (e.g. AM6C)

Bracket * for Mounting Angle Order Number

XM6X XM7X XM8X XM9X

*Pins, bushings & collars not included when ordering brackets only.

RevJ

Page 29

Height


BRACKET OPTIONS

NO-TILT CONVERTIBLE Outboard Slide Bracket Assemblies 8” High Slide Bracket Asm – NA8P 9” High Slide Bracket Asm – NA9P

OUTBOARD SLIDER PARTS (Adds 17 lbs to standard weight)

2

6

1

3

7 8 9

5 4

Item

Description

Part No.

1

Lock Nut Rear Stop – 8” height Rear Stop – 9” height 2 1/2 lg. Shoulder Screw Thick Shim (round) Thin Shim (round) 1/2-13 Screw – 8” height 1/2-13 Screw – 9” height Front Stop – 8” height Front Stop – 9” height Spring Plunger Plug J am Nut 3/4 lg. Shoulder Screw Front Tilt Stop Plate

SK-70402-01 SK-72066-01 SK-72066-02 SK-70201-02 SK-72068-12 SK-72068-06 SK-70202-08 SK-70202-16 SK-72065-08 SK-72065-09 SK-71015-01 SK-71003-01 SK-70403-04 SK-70201-14 SK-77084-00

2

10 11 12

3 4 5 6 7

Air cylinder not included, order SK 75015-03 (see pg. 34)

8 9 10 11 12

INBOARD SLIDER PARTS (Adds 26 lbs to standard weight)

Inboard Slide Bracket Assembly 9” High Slide Bracket Asm – NB9P

6 7 8

5 4 3

2

9 10

1

11 13

16

12

Air cylinder not included, order SK 75015-03 (see pg. 34)

15

Item

Description

Part No.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Lock Nut Rear Stop 2 1/2 lg. Shoulder Screw Thick Shim (rectangle) Thin Shim (rectangle) 1/2-13 Screw L.H. F ront Stop 1 lg. Shoulder Screw Spring Plunger J am Nut Roll Pin L.H. F ront Tilt Stop Plate R.H. Front Stop R.H. Front Tilt Stop Plate Thick Shim (round) Thin Shim (round)

SK-70402-01 SK-72066-01 SK-70201-02 SK-72069-12 SK-72069-06 SK-70202-26 SK-72067-29 SK-70201-12 SK-71015-01 SK-70403-04 SK-70104-03 SK-72064-00 SK-72065-29 SK-72063-00 SK-72068-12 SK-72068-06

14 STATIONARY PARTS (Adds 26 lbs to standard weight)

Complete Stationary Assemblies 8” High Flat Plate Asm – NDB8X 9” High Flat Plate Asm – NDB9X

6 4

7

5

8

3

9 10

2 13

1

11

12

RevJ

Description

Part No.

1 2 3 4 5

Lock Nut Rear Stop 2 1/2 lg. Shoulder Screw Thick Shim (rectangle) Thin Shim (rectangle) 1/2-13 Screw – 8” height 1/2-13 Screw – 9” height LH Front Stop – 8” height LH Front Stop – 9” height 1 lg. Shoulder Screw Plunger Spring J am Nut LH Front Tilt Stop Plate Roll Pin RH Front Stop – 8” height RH Front Stop – 9” height RH Front Tilt Stop Plate Thick Shim (round) Thin Shim (round)

SK-70402-01 SK-72066-01 SK-70201-02 SK-72069-12 SK-72069-06 SK-70202-17 SK-70202-18 SK-72067-08 SK-72067-09 SK-70201-12 SK-71015-01 SK-70403-04 SK-72064-00 SK-70104-03 SK-72065-18 SK-72065-19 SK-72063-00 SK-72068-12 SK-72068-06

6 7 8 9 10 11 12 13

14 16

Item

14 15 16

15 Page 30

REPLACEMENT KITS

Cushion and Lock J aw Rebuild Kit–L.H. only Order Number

SK 73221-50Z

Weight

6 lbs.

Includes: Ring, Eye bolt, Lock jaw spring, Lock jaw, Lock jaw pivot pin, Cushion ring insert, Cushion ring fixture, Lubrication kit, (4) Socket head cap screws

Low L ube Plate Replacement Kit Order Number

SK 3106-003

RevJ

FIFTH WHEEL ACCESSORIES

Includes: (2) Plates, (12) Bolts

Weight

6 lbs.

Page 31


AIR LINE KITS

To air supply

To air c linder

Complete Air Slide Control and Air Line Kit Slide Travel

Weight

SK 75002-01

36” or less

2 lbs.

SK 75002-04

48” or more

2 lbs.

Order Number

Includes:

Cab Control Valve 30’ SAE J S44 type A Nylon Tubing Fittings Bulk Head Fitting Coiled Air Line Wire Ties

To air c linder

Includes: Bulk Head Fitting Coiled Air Line Wire Ties

Ai r Sl id e and Ai r L in e Ki t Slide Travel

Weight

SK 75002-02

36” or less

2 lbs.

SK 75002-16

48” or more

2 lbs.

Order Number

Page 32 RevJ

AIR L INE KITS

Air Release Mani fo ld Assembl y Kit Order Number

SK 75002-05


Includes: Air Release Manifold Valve Air Release Inversion Valve Cab Control Plate Finger Guard

Weight

2 lbs.

To air c linder

To manifold assembly

Ai r Release Air Li ne Kit Order Number

SK 75002-12 SK 75002-15

RevJ

Fifth Wheel type

36” travel or less Stationary 48” travel or more

Weight

1 lb. 1 lb.

Page 33

Includes: 30’ SAE J S44 type A Nylon Tubing Fittings Bulk Head Fitting Coiled Air Line


AIR CYLINDER

15 3/4"

12"

Old Style Sliding Fifth Wheel Air Cyli nder (long) Order Number

SK 75015-01

Current Sliding Fifth Wheel Air Cyli nder (short )

Weight

Order Number

6 lbs.

SK 75015-03

Includes: Composite cylinder, (2) Mounting Screws, (2) Lock Nuts (2) Spring Brackets, Double Coil Spring

SK 75015-02

Current Air Release Topplate Standard Ai r Cylinder

Weight

Order Number

5 lbs.

SK 75015-05

Includes: Stainless Steel Air Cylinder,

Weight

5 lbs.

Includes: Stainless Steel Air Cylinder, Clevis, Long Clevis Pin, Short Clevis Pin, Washer

Page 34 RevJ

4 lbs.

Includes: Composite cylinder & rod, (2) Mounting Screws, (2) Lock Nuts

Old Style Air Release Topplate Slip Rod Air Cylind er Order Number

Weight

MOUNTING ACCESSORIES

HARDWARE KITS

Includes: 5/8” grade 8 fasteners Hardened steel SAE washers Grade C lock nuts

Note: Outboard sliding fifth wheel to mounting angle kits attach fifth wheel to mounting angles. To attach mounting angle to tractor frame order a mounting angle to tractor frame hardware kit. Outboard Sliding Fifth Wheel To Mounting Angle Kits Slide Travel

Fastener Qty.

Weight

12”

20

8 lbs.

SK 75000-20

16”

22

9 lbs.

SK 75000-22

24”

26

11 lbs.

SK 75000-26

36”

32

14 lbs.

SK 75000-32

48”

38

16 lbs.

SK 75000-38

Order Number

Stationary Fift h Wheel To Mountin g Ang le Kit Mounting Style

Flat Plate Mount Corrugated Mounting Plate

Fastener Qty.

Weight

10

5 lbs.

SK 75001-10

18

8 lbs.

SK 75017-18

Order Number

Mounting Angle To Tractor Frame Kits Model Type

Fastener Qty.

Weight

10

5 lbs.

SK 75001-10

18”/16” Slider

12

6 lbs.

SK 75001-12

24” Slider

14

6 lbs.

SK 75001-14

36” Slider

16

7 lbs.

SK 75001-16

48” Slider

18

8 lbs.

SK 75001-18

Stationary 12” Slider

Page 35 RevJ

Order Number

SLIDING OUTBOARD MOUNTING ANGLE


3.0 1.69

4.0 Typ. 2.13

Top of Truck Frame 2.38 “A” .65 x 1.38 Slot For 5/8 Bolt (See P age 35)

4.0 Typ. 2.13

“L”

Sliding Outboard Mounting Angle Material Type

Thickness

5/16 Structural ASTM-A-36

3/8

5/16 Formed High Strength Low Alloy Steel 3/8

RevJ

Slide Travel

“L” Length

“A” Leg

Weight Per Angle

Order Number

12 16 24 36 48 12 16 24 36 48 12 16 24 36 48 12 16 24 36 48

40 1/4 44 1/4 52 1/4 64 1/4 76 1/4 40 1/4 44 1/4 52 1/4 64 1/4 76 1/4 40 1/4 44 1/4 52 1/4 64 1/4 76 1/4 40 1/4 44 1/4 52 1/4 64 1/4 76 1/4

4” 4” 4” 4” 4” 4” 4” 4” 4” 4” 3 1/2” 3 1/2” 3 1/2” 3 1/2” 3 1/2” 3 1/2” 3 1/2” 3 1/2” 3 1/2” 3 1/2”

22 lbs. 24 1/2 lbs. 29 lbs. 35 1/2 lbs. 42 lbs. 26 1/4 lbs. 29 lbs. 34 lbs. 42 lbs. 50 lbs. 19 1/2 lbs. 21 1/2 lbs. 25 1/2 lbs. 31 lbs. 37 lbs. 24 lbs. 26 lbs. 31 lbs. 38 lbs. 45 lbs.

SK 75007-12 SK 75007-16 SK 75007-24 SK 75007-36 SK 75007-48 SK 75008-12 SK 75008-16 SK 75008-24 SK 75008-36 SK 75008-48 SK 75009-12 SK 75009-16 SK 75009-24 SK 75009-36 SK 75009-48 SK 75010-12 SK 75010-16 SK 75010-24 SK 75010-36 SK 75010-48

Page 36

STATIONARY INBOARD MOUNTING ANGLE


4.0

Top of Mounting Angle 2.38

“A”

.65 x 1.38 Slot For 5/8 Bolt (See Page 35)

“B” Typ. 2.0 36.0

Stationary Inboard Mounting Ang le

RevJ

Material Type

Thickness

“A” Leg

“B” Spacing

Weight Per Angle

Order Number

Structural ASTM-A-36

5/16

4”

4”

23 1/2 lbs.

SK 75003-31

3/8

4”

4”

28 1/2 lbs.

SK 75003-38

Formed High Strength Low Alloy Steel

5/16

3 1/2”

2”

20 1/2 lbs.

SK 75004-31

3/8

3 1/2”

2”

25 lbs.

SK 75004-38

Page 37

STATIONARY OUTBOARD MOUNTING ANGLE


3.0 Typ. 1.69

“B” Typ. 2.0

Top of Truck Frame 2.38

“A”

.65 x 1.38 Slot For 5/8 Bolt (See Page 35) “B” Typ.

2.0

36.0

Station ary Outboard Mounting An gle

RevJ

Material Type

Thickness

“A” Leg

“B” Spacing

Weight Per Angle

Order Number

Structural ASTM-A-36

5/16

4”

4”

19 1/2 lbs.

SK 75005-31

3/8

4”

4”

24 lbs.

SK 75005-38

Formed High Strength Low Alloy Steel

5/16

3 1/2”

2”

16 lbs.

SK 75006-31

3/8

3 1/2”

2”

20 lbs.

SK 75006-38

Page 38

CORRUGATED

MOUNTING

MOUNTING PLA TE

ACCESSORIES

26.0

1.00 Height

.65 x 1.65 Slot For 5/8 Bolt (10) Holes

Drilled & Tapped For 5/8 Bolt (8) Holes

36.813

16.0 Typ.

5.438 Typ. 4.0 Typ.

CORRUGATED MOUNTING PLATE

Weight

Order Number

SK 75011-00

RevJ

99 lbs.

Page 39

40.0

SERVICE TOOLS

SERVICE TOOLS

FIFTH WHEEL LOCK

KINGPIN

TESTER

GAGE

Order Number

SK 76000-00

Weight

Weight

Order Number

30 lbs.

SK 76001-01

4 1/2 lbs.

FIFTH WHEEL

DOUBLE COIL SPRING

RELEASE HOOK

TOOL

Order Number

SK 75021-00

Weight

Weight

Order Number

1 1/4 lbs.

SK 76003-00

1/4 lb.

BRACKET PIN SLIDE HAMMER

Order Number

SK 76005-01

Weight

19 lbs.

Includes Standard 5/8-11 tip & 1/2-13 tip adapter

Page 40 RevJ

Jost 5th Wheel Catalog

Recommend Documents