ISO Rubber Test Methods_content.

ISO Rubber Test Methods_content Contents Standard

Edition

SS-ISO 34-1:2004

2

Rubber, vulcanized or thermoplastic — Determination of tear strength —   Part 1: Trouser, angle and crescent test pieces (=ISO 34-1:2004)

SS-ISO 34-2:2007

1

Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 2: Small (Delft) test pieces (=ISO 34-2:1996)

SS-ISO 36 36:2005

3

Rubber, vulcanized or thermoplastic — Determination of adhesion to textile fabrics (=ISO 36:2005)

SS-ISO 37:2005

2

Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain  properties (=ISO 37:2005)

SS-ISO 37 37:2005/Cor 1: 1:2008

1

Corrigendum 1 (=ISO 37 37:2005/Cor 1: 1:2008)

SS-ISO 48 48:2007

1

Rubber, vulcanized or th thermoplastic — Determination of hardness (h (hardness  between 10 IRHD and 100 IRHD) (=ISO 48:1994)

SS-ISO 132:2005

3

Rubber, vulcanized or thermoplastic — Determination of flex cracking and crack growth (De Mattia) (=ISO 132:2005)

SS-ISO 18 188:2007

2

Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests (=ISO 188:1998)

SS-ISO 247

2

Rubber — Determination of ash (=ISO 247:2006)

SS-ISO 248:2005

2

Rubber, raw — Determination of volatile-matter content (=ISO 248:2005)

SS-ISO 249

1

Rubber, raw natural — Determination of dirt content (=ISO 249:1995)

SS-ISO 289-1:2005

2

Rubber, unvulcanized — Determinations using a shearing-disc viscometer —   Part 1: Determination of Mooney viscosity (=ISO 249-1:2005)

SS-ISO 289-2 1

Rubber, unvulcanized — Determinations using a shearing-disc viscometer —   Part 2: Determination of pre-vulcanization characteristics (=ISO 289-2: 1994)

SS-ISO 289-3 1

Rubber, unvulcanized — Determinations using a shearing-disc viscometer —   Part 3: Determination of the Delta Mooney value for non-pigmented, oilextended emulsion-polymerized SBR (=ISO 289-3:1999)

SS-ISO 289-4 1

Rubber, unvulcanized — Determinations using a shearing-disc viscometer —   Part 4: Determination of the Mooney stress-relaxation rate (=ISO 289-4:2003)

SS-ISO 812

2

Rubber, vulcanized or thermoplastic — Determination of low-temperature  brittleness (=ISO 812:2006)

SS-ISO 813

2

Rubber, vulcanized or thermoplastic — Determination of adhesion to a rigid substrate — 90 degree peel method (=ISO 813:1997)

SS-ISO 814:2007

2

Rubber, vulcanized — Determination of adhesion to metal — Two-plate method (=ISO 814:1996)

SS-ISO 815-1:2008

Rubber, vulcanized or thermoplastic — Determination of compression set — Part 1: At ambient or elevated temperatures (=ISO 815-1:2008)

SS-ISO 815-2:2008

Rubber, vulcanized or thermoplastic — Determination of compression set — Part 2: At low temperatures (=ISO 815-2:2008)

SS-ISO 1407

1

SS-ISO 14 1407/Cor1:2007

   t   n   e    t   n   o   c _   s    d   o    h    t   e   m    t   s   e    t   r   e    b    b   u    R

Title

Rubber — Determination of solvent extract (=ISO 1407:1992) Corrigendum 1 (=ISO 14 1407:1992/Cor1:2007)

SS-ISO 1408

2

Rubber — Determination of carbon black content — Pyrolytic and chemical degradation methods (=ISO 1408:1995)

SS-ISO 1409

2

Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic)  — Determination of surface tension tension by the ring method (=ISO 1409:2006)

SS-ISO 1431-1

2

Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 1: Static and dynamic strain testing (=ISO 1431-1:2004)

SS-ISO 1431-3

1

Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers (=ISO 1431-3:2000)

SS-ISO 1432

1

Rubber, vulcanized or thermoplastic — Determination of low temperature stiffening (Gehman test) (=ISO 1432:1998)

SS-ISO 1432/ Cor 1

1

Technical Corrigendum 1:2003

SS-ISO 1656

1

Rubber, raw natural, and rubber latex, natural — Determination of nitrogen content (=ISO 1656:1996)

SS-ISO 1657

1

Rubber, raw and rubber latex — Determination of iron content — 1,10Phenanthroline photometric method (=ISO 1657:1986)

SS-ISO 1817:2005

3

Rubber, vulcanized — Determination of the effect of liquids (=ISO 1817:2005)

SS-ISO 1827:2007

1

Rubber, vulcanized or thermoplastic — Determination of modulus in shear or ad hesion to rigid plates — Quadruple shear method (=ISO 1827:1991)

SS-ISO 1853

2

Conducting and dissipative rubbers, vulcanized or thermoplastic — Measurement of resistivity (=ISO 1853:1998)

SS-ISO 2007:2007

1

Rubber, unvulcanized — Determination of plasticity — Rapid-plastimeter   method (=ISO 2007:1991)

SS-ISO 2285:2007

3

Rubber, vulcanized or thermoplastic — Determination of tension set under   constant elongation, and of tension set, elongation and creep under constant tensile load (=ISO 2285:2001)

SS-ISO 2453

1

Rubber, raw styrene-butadiene, emulsion-polymerized — Determination of    bound styrene content — Refractive index method (=ISO 2453:1991)

SS-ISO 2453/ Cor 1

1

Technical Corrigendum 1:1996

SS-ISO 2454

1

Rubber products – Determination of zinc content – EDTA titrimetric method

SS-ISO 2781

1

Rubber, vulcanized — Determination of density (=ISO 2781:1988)

SS-ISO 2781/ Cor 1

1

Technical Corrigendum 1:1996

SS-ISO 2782:2006

2

Rubber, vulcanized or thermoplastic — Determination of permeability to gases (=ISO 2782:2006)

SS-ISO 2878:2005

2

Rubber — Antistatic and conductive products — Determination of electrical resistance (=ISO 2878:2005)

SS-ISO 2921:2005

3

Rubber, vulcanized — Determination of low-temperature characteristics —   Temperature-retraction procedure (TR test (=ISO 2921:2005)

SS-ISO 2951

1

Vulcanized rubber — Determination of insulation resistance (=ISO 2951:2005)

SS-ISO 3384:2005

4

Rubber, vulcanized or thermoplastic — Determination of stress relaxation in compression at ambient and at elevated temperatures (=ISO 3384:2005)

SS-ISO 3387

1

Rubber — Determination of crystallization effects by hardness measurements (=ISO 3387:1994)

SS-ISO 3387/Cor 1

1

Technical Corrigendum 1:2000

SS-ISO 3417

1

Rubber — Measurement of vulcanization characteristics with the oscillating disc curemeter (=ISO 3417:1991)

SS-ISO 3865:2005

3

Rubber, vulcanized or thermoplastic — Methods of test for staining in contact with organic material (=ISO 3865:2005)

SS-ISO 3899:2005

2

Rubber — Nitrile latex — Determination of residual acrylonitrile content (=ISO 3899:2005)

SS-ISO 3900

1

Rubber — Nitrile latex — Determination of bound acrylonitrile content (=ISO 3900:1995)

SS-ISO 4637

1

Rubber-coated fabrics — Determination of rubber-to-fabric adhesion — Direct tension method (=ISO 4637:1979)

SS-ISO 4645

1

Rubber and rubber products — Guide to the identification of antidegradants —   Thin layer chromatographic methods (=ISO 4645:1984 + Cor 1:1991)

SS-ISO 4647

1

Rubber, vulcanized — Determination of static adhesion to textile cord — H-pull test (=ISO 4647:1982)

SS-ISO 4649

2

Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device (=ISO 4649:2002)

SS-ISO 4650:2005

2

Rubber — Identification — Infrared spectrometric method (=ISO 4650:2005)

SS-ISO 4655 1

Rubber — Reinforced styrene-butadiene latex — Determination of total bound styrene content (=ISO 4655:1985)

SS-ISO 4661-2

1

Rubber, vulcanized — Preparation of samples and test pieces — Part 2: Chemical tests (=ISO 4661-2:1987)

SS-ISO 4662

1

Rubber — Determination of rebound resilience of vulcanizates (=ISO 4662:1986)

SS-ISO 4664-1:2005

1

Rubber, vulcanized or thermoplastic — Determination of dynamic properties —   Part 1: General guidance (=ISO 4664-1:2005)

SS-ISO 4664-2:2006

1

Rubber, vulcanized or thermoplastic — Determination of dynamic properties —   Part 2: Torsion pendulum methods at low frequencies (=ISO 4664-2:2006)

SS-ISO 4665

2

Rubber, vulcanized or thermoplastic — Resistance to weathering (=ISO 4665:2006)

SS-ISO 4666-1

1

Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — Part 1: Basic principles (=ISO 4666-1:1982)

SS-ISO 4666-2

1

Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — Part 2: Rotary flexometer (=ISO 4666-2:1982)

SS-ISO 4666-3

1

Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — Part 3: Compression flexometer (=ISO 4666-3:1982)

SS-ISO 4666-4:2007

Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — Part 4: Constant stress flexometer (=ISO 5603:2007)

SS-ISO 5478:2006

2

Rubber — Determination of styrene content — Nitration method (=ISO 5478:2006)

SS-ISO 5600:2007

2

Rubber — Determination of adhesion to rigid materials using conical shaped  parts (=ISO 5600:2007)

SS-ISO 5603:2007

2

Rubber, vulcanized — Determination of adhesion to wire cord (=ISO 5603:2007)

SS-ISO 5893

2

Rubber and plastics test equipment — Tensile, flexural and compression types (constant rate of traverse) – Specification (=ISO 5893:2002)

SS-ISO 5945

1

Rubber — Determination of polyisoprene content (=ISO 5945:1989)

SS-ISO 6101-1

1

Rubber — Determination of metal content by atomic absorption spectrometry —   Part 1: Determination of zinc content (=ISO 6101-1:1991)

SS-ISO 6101-2

1

Rubber — Determination of metal content by atomic absorption spectrometry —   Part 2: Determination of lead conten (=ISO 6101-2:1997)

SS-ISO 6101-3

1

Rubber — Determination of metal content by atomic absorption spectrometry —   Part 3: Determination of copper content (=ISO 6101-3:1997)

SS-ISO 6101-4

1

Rubber — Determination of metal content by atomic absorption spectrometry —   Part 4: Determination of manganese content (=ISO 6101-4:1997)

SS-ISO 6101-5:2006

2

Rubber — Determination of metal content by atomic absorption spectrometry —   Part 5: Determination of iron content (=ISO 6101-5:2006)

SS-ISO 6133

2

Rubber and plastics — Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength (=ISO 6133:1998)

SS-ISO 6179

2

Rubber, vulcanized or thermoplastic — Rubber sheets and rubber-coated fabrics  — Determination of transmission rate of volatile liquids (gravimetric technique) (=ISO 6179:1998)

SS-ISO 6225-1:2006

2

Rubber, raw, natural — Determination of castor oil content — Part 1: Determina tion of castor oil glyceride content by thin-layer chromatography (=ISO 6225- 1:2006)

SS-ISO 6225-2

1

Rubber, raw, natural — Determination of castor oil content — Part 2: Determina tion of total ricinoleic acid content by gas chromatography (=ISO 6225-2:1990)

SS-ISO 6235

1

Rubber, raw — Determination of block polystyrene content — Ozonolysis method (=ISO 6235:1995)

SS-ISO 6502

2

Rubber — Guide to the use of curemeters (=ISO 6502:1999)

SS-ISO 6505:2005

2

Rubber, vulcanized or thermoplastic — Determination of tendency to adhere to and corrode metals (=ISO 6505:2005)

SS-ISO 6528-1

1

Rubber — Determination of total sulfur content — Part 1: Oxygen combustion flask method (=ISO 6528-1:1992)

SS-ISO 6528-2

1

Rubber — Determination of total sulfur content — Part 2: Sodium peroxide fusion method (=ISO 6528-2:1992)

SS-ISO 6528-3

1

Rubber — Determination of total sulfur content — Part 3: Furnace combustion method (=ISO 6528-3:1988)

SS-ISO 6914:2004

2

Rubber, vulcanized or thermoplastic — Determination of ageing characteristics  by measurement of stress relaxation (=ISO 6914:2004)

SS-ISO 6943:2007

1

Rubber, vulcanized — Determination of tension fatigue (=ISO 6943:2007)

SS-ISO 7267-1

2

Rubber-covered rollers — Determination of apparent hardness — Part 1: IRHD method (=ISO 7267-1:1997)

SS-ISO 7267-2

1

Rubber-covered rollers — Determination of apparent hardness — Part 2: Shoretype durometer method (=ISO 7267-2:1986)

SS-ISO 7267-3:2007

1

Rubber-covered rollers — Determination of apparent hardness — Part 3: Pusey and Jones method (=ISO 7267-3:2007)

SS-ISO 7269

1

Rubber — Determination of free sulphur (=ISO 7269)

SS-ISO 7269 Cor1

1

Technical Corrigendum 1:2002

SS-ISO 7270-1

1

Rubber — Analysis by pyrolytic gas-chromatographic methods — Part 1: Identification of polymers (single polymers and polymer blends) (=ISO 7270- 1:2003)

SS-ISO 7270-2: 2005

1

Rubber — Analysis by pyrolytic gas-chromatographic methods — Part 2: Determination of styrene/butadiene/isoprene ratio (=ISO 7270-2:2005)

SS-ISO 7323:2006

2

Rubber, raw and unvulcanized compounded — Determination of plasticity number and recovery number — Parallel-plate method (=ISO 7323:2006)

SS-ISO 7619-1: 2004

1

Rubber, vulcanized or thermoplastic — Determination of indentation hardness —   Part 1: Durometer method (Shore hardness) (=ISO 7619-1:2004)

SS-ISO 7619-2: 2004

1

Rubber, vulcanized or thermoplastic — Determination of indentation hardness —   Part 2: IRHD pocket meter method (=ISO 7619-2:2004)

SS-ISO 7725

1

Rubber and rubber products — Determination of bromine and chlorine content  — Oxygen flask combustion technique (=ISO 7725:1991)

SS-ISO 7743:2004

2

Rubber, vulcanized or thermoplastic — Determination of compression stressstrain properties (=ISO 7743:2004)

SS-ISO 7780

1

Rubbers and rubber latices — Determination of manganese content — Sodium  periodate photometric methods (=ISO 7780:1998)

SS-ISO 7781:2008

2

Styrene-butadiene rubber, raw — Determination of soap and organic-acid content (=ISO 7781:2008)

SS-ISO 8013:2006

2

Rubber, vulcanized — Determination of creep in compression or shear   (=ISO 8013:2006)

SS-ISO 8053

1

Rubber and latex — Determination of copper content — Photometric method (=ISO 8053:1995)

SS-ISO 8054

1

Rubber, compounded or vulcanized — Determination of sulfide sulfur content —   Iodometric method (=ISO 8054:1996)

SS-ISO 9026:2007 (=ISO 9026:2007)

2

Raw rubber or unvulcanized compounds — Determination of green strength

SS-ISO 9028:2006

2

Rubber — Dissolution by acid digestion (=ISO 9028:2006)

SS-ISO/TR 9272: 2005

2

Rubber and rubber products — Determination of precision for test method standards (=ISO/TR 9272:2005)

SS-ISO 9924-1

2

Rubber and rubber products — Determination of the composition of vulcanizates and uncured compounds by thermogravimetry — Part 1: Butadiene, ethylene propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene butadiene rubbers (=ISO 9924-1:2000)

SS-ISO 9924-2

1

Rubber and rubber products — Determination of the composition of vulcanizates and uncured compounds by thermogravimetry — Part 2: Acrylonitrile-butadiene and halobutyl rubbers (=ISO 9924-2:2000)

SS-ISO 10398

1

Rubber — Identification of accelerators in cured and uncured compounds (=ISO 10398:1998)

SS-ISO 11089

1

Rubber, raw synthetic — Determination of anti-degradants by high-performance liquid chromatography (=ISO 11089:1997)

SS-ISO 11344:2004

1

Rubber, raw synthetic — Determination of the molecular-mass distribution of so lution polymers by gel permeation chromatography (=ISO 11344:2004)

SS-ISO 11345:2006

2

Rubber — Assessment of carbon black and carbon black/silica dispersion —   Rapid comparative methods (=ISO 11345:2006)

SS-ISO 11346:2004

2

Rubber, vulcanized or thermoplastic — Estimation of life-time and maximum temperature of use (=ISO 11346:2004)

SS-ISO 12965

1

Butadiene rubber — Determination of microstructure by infra-red spectrometry (=ISO 12965:2000)

SS-ISO 12965:2000/Cor 1 1

Technical Corrigendum 1:2006

SS-ISO 13226:2005

2

Rubber — Standard reference elastomers (SREs) for characterizing the effect of   liquids on vulcanized rubbers (=ISO 13226:2005)

SS-ISO 13226/Cor1:2007

1

Corrigendum 1 (=ISO 1326:2005/Cor 1:2007)

SS-ISO 14558

1

Rubber — Determination of residual unsaturation of hydrogenated nitrile rubber   (HNBR) by infrared spectroscopy (=ISO 14558:2000)

SS-ISO 15113

2

Rubber — Determination of frictional properties (=ISO 15113:2005)

SS-ISO 15671

1

Rubber and rubber additives — Determination of total sulfur content using an automatic analyser (=ISO 15671:2000)

SS-ISO 15672

1

Rubber and rubber additives — Determination of total nitrogen content using an automatic analyser (=ISO 15672:2000)

SS-ISO 16564:2004

1

Rubber, raw natural — Determination of average molecular mass and molecularmass distribution by size exclusion chromatography (SEC) ( =ISO 16564:2004)

SS-ISO 16564:2004/Amd1 1

Amendmernt 1:2005

SS-ISO 16565

1

Rubber — Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers (=ISO 16565:2002)

SS-ISO 17052:2007

1

Rubber, raw - Determination of residual monomers and other volatile lowmolecular - mass compounds by capillary gas chromatography - Thermal desorption (dynamic headspace) method (=ISO 17052:2007

SS-ISO 17564

1

Nitrile rubber — Determination of residual unsaturation in hydrogenated nitrile rubber (HNBR) by iodine value (=ISO 17564:2001)

SS-ISO 18517:2005

1

Rubber, vulcanized or thermoplastic — Hardness testing — Introduction and guide (=ISO 18517:2005)

SS-ISO 18898:2006

1

Rubber — Calibration and verification of hardness testers (=ISO 18898:2006)

SS-ISO 18899:2004

1

Rubber — Guide to the calibration of test equipment (=ISO 18899:2004)

SS-ISO 19003:2006

1

Rubber and rubber products — Guidance on the application of statistics to  physical testing (=ISO 19003:2006)

SS-ISO 19004:2004

1

Rubber and rubber products — Determination of the sensitivity of test methods (=ISO 19004:2004)

SS-ISO 21561:2005

1

Styrene-butadiene rubber (SBR) — Determination of the microstructure of   solution-polymerized SBR (=ISO 21561:2005)

SS-ISO 22768:2006

1

Rubber, raw — Determination of the glass transition temperature by differential scanning calorimetry (DSC) (=ISO 22768:2006)

SS-ISO 23337:2007

1

Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using the Improved Lambourn test machine (=ISO 23337:2007)

SS-ISO 23529:2004

1

Rubber — General procedures for preparing and conditioning test pieces for    physical test methods (=ISO 23529:2004)

SS-ISO 23794: 2004

1

Rubber, vulcanized or thermoplastic — Abrasion testing – Guidance (=ISO 23794:2003)