Artikel ini membahas tentang apa itu home studio recording dan apa saja yang kita butuhkan untuk membangun sebuah home studio recording.Deskripsi lengkap
Full description
Great Physics Textbook
fem analysis
Atty. Santos' outline for ITL, DLSU Law
Descrição: Artikel ini membahas tentang apa itu home studio recording dan apa saja yang kita butuhkan untuk membangun sebuah home studio recording.
lectures
Full description
Introduction to Vulcan | Maptek Vulcan 8.1
Figure 6-7 Effect of deviation entry on filtering process 5. Apply a 2D Filter with a Minimum deviation from the line of 0.1. The filtered line is displayed in grey, and you are prompted to Retain or Reject the filter. 6. Zoom in close enough to view the filtered points. If the new object is acceptable, select Retain filter. Output from the filtering process is displayed in the Report window. Note:
If an object is designed in 3D, such as triangulation profiles, select the 3D Filter option. This option allows you to specify the deviation from the line and filters X, Y, Z values, whereas the 2D Filter does not change the Z value. If filtering contour lines, a 3D filter does not affect the Z values as each object has only one unique Z value.
Tutorial 6-3 1. Close all open layers. 2. Load my_split.arch_d using File > Load Archive. 3. Right-click the green line, then click Label > Point Sequence. Choose to label All Points. 4. Click Design > Object Edit > Split and select Split by point. Follow the prompts to split the green line at points 4 and 8. 5. Click Design > Object Edit > Join Lines. Join both sides of the solid green line with the ends of the dashed blue line. 6. Repeat steps 3-5 to join the solid red line with the dashed purple line. 7. Delete the two remaining solid inner strings.
Tutorial 6-4 Load the layer named 50_METER_LINES. Use options in Design > Object Edit to cut the lines so they exist only within the boundary polygon as shown in Figure 6-8.
