TECHNICAL SPECIFICATION INDEX OF PIPING MATERIAL CLASS SUNOCO, INC 1232 FCCU UPGRADE PROJECT PHILADELPHIA, PENNSYLVANIA
REV: 5
Revision No. Date By Checked By Approved By
ENGINEERING SERVICES BY KBR TECHNICAL SERVICES, INC.
0 05-APR-05 JH RS JH
1 07-APR-05 JH RS JH
2 15-JUN-05 AV RS JH
3 21-OCT-05 AV JH RM
IOPMC-6244
PAGE 1 OF 3
4 5 24JAN 06 01MAR06 AV AV JH JH NM NM
TECHNICAL SPECIFICATION INDEX OF PIPING MATERIAL CLASS SUNOCO, INC 1232 FCCU UPGRADE PROJECT PHILADELPHIA, PENNSYLVANIA
REV: 5 PIPING MATERIAL CLASS
SERVICE
BASIC MATERIAL
SIZE RANGE
VALVE BODY/ TRIM
CORR. ALLOW
REV NO.
CLASS 150, RF o -20 TO 400 F
CARBON STEEL
1/2 – 54” CARBON STEEL 13CR
0.050”
3
CLASS 150, RF o -20 TO 400 F CLASS 150, RF o -20 TO 850 F CLASS 150, RF -20 to 400° F
CARBON STEEL CARBON STEEL CARBON STEEL GALVANIZED 304 SS
1/2 - 6”
CARBON STEEL 13CR/HF CARBON STEEL 13CR/HF CARBON STEEL 13 CR
0.050”
3
0.050”
3
NONE
3
1/2 – 14” CARBON STEEL 13CR 1/2-24” CARBON STEEL HF
NONE
3
0.050”
3
CARBON STEEL 13CR/HF
0.050”
3
CARBON STEEL 13CR/HF
0.250”
3
1-1/4 CR-1/2MO 13CR/HF
0.125”
3
2
CAA
3
CAB
4
CBA
5
CK
6
CS
7
EC
GENERAL PROCESS
8
ECF
GENERALPROCESS CLASS 300, RF CORROSIVE -20 TO 750°F
9
EKA
REACTOR FEED, REFORMER EFFLUENT STEAM, BFW CONDENSATE
CLASS 300, RF -20 TO 1000°F
11 HS
STEAM, BFW CONDENSATE
CLASS 600, RF -20 TO 750°F
12 3CA3P (NOTE 1)
PROCESS WITH CATALYST
CLASS 300, RF, -20 to 750°F
13 3CK1P (NOTE 1) 14 3SK0P (NOTE 1)
HIGH TEMP. PROCESS, STEAM HIGH TEMP. PROCESS, FLUE GAS, CATALYST HYDROGEN, CORROSIVE PROCESS, CATALYST HIGH TEMP. PROCESS, STEAM
CLASS 300, RF -20 TO 1200°F CLASS 300, RF -20 to 1500°F
16 6CK1P (NOTE 1)
PLANT AIR, COOLING WATER MAINTENANCE AIR, MAINTENANCE WATER (NOTE 2) GENERAL PROCESS GENERAL PROCESS INSTRUMENT AIR
RATING-FACE TEMP-PRESS
CA
15 3CL2H (NOTE 1)
PAGE 2 OF 3
ENGINEERING SERVICES BY KBR TECHNICAL SERVICES, INC.
1
10 ES
IOPMC-6244
LUBE OIL, SEAL OIL CLASS 150, RF -20 TO 200°F STEAM CLASS 150 RF, CONDENSATE -20 to 500°F CLASS 300, RF -20 TO 750°F
CLASS 300, RF -20 TO 750°F
1/2 - 6” ½-6”
KILLED CARBON STEEL KILLED 1/2- 24” CARBON STEEL KILLED 1/2- 24” CARBON STEEL 1-1/4 CR-1/2MO 1/2- 16”
KILLED CARBON STEEL KILLED CARBON STEEL KILLED CARBON STEEL 2-1/4 CR-1MO
1/2- 14”
CARBON STEEL HF
0.0625”
3
1/2- 24”
CARBON STEEL HF
0.0625”
3
1/2-8”
CARBON STEEL 316 SS
0.188”
3
1/2- 24”
0.050”
3
321H SS
1/2- 12”
2-1/4 CR-1MO 13CR/HF 347H SS SABM
NONE
3
CLASS 300, RF -20 TO 1100°F
5 CR
1/2- 14”
5CR 13CE/HF
0.125”
3
CLASS 600, RF -20 TO 1200°F
2-1/4 CR-1MO
1/2- 14”
2-1/4 CR-1MO 13CR/HF
0.050”
3
TECHNICAL SPECIFICATION INDEX OF PIPING MATERIAL CLASS SUNOCO, INC 1232 FCCU UPGRADE PROJECT PHILADELPHIA, PENNSYLVANIA
REV: 5
ENGINEERING SERVICES BY KBR TECHNICAL SERVICES, INC.
IOPMC-6244
PAGE 3 OF 3
NOTES: 1. Since there is not matching spec can be found Sun Oil spec index; a special naming convention has been used: A BB C D A: Rating: 1- CL 150, 3- CL 300, 6-Cl 600 B: Material: CA- Killed Carbon Steel, CK- 2-1/2 Cr-1Mo, CL- 5Cr, SK- 321H SS C: Corrosion Allowance: 0- 0, 1- 0.065”, 2- 0.125”, 3- 0.188” D: Service: P- Process, S-Steam, H- Hydrogen 2. Maintenance Air and Maintenance Water in this line class will use galvanized carbon steel material for pipe and fittings.
