ICND1 2 Questions Apr 2018

New ICND1 Questions Question 1 Syslog –  Syslog –  what  what does not belong? A. host name B. severity C. timestamp D. message

Answer: A Question 2 What does a switch use for communication between VLANs? A. STP B. CDP C. VTP D. Etherchannel

Answer: C Question 3 What is the maximum size of an Ethernet frame that uses 802.1Q tagging? A. 1514 bytes B. 128 bytes C. 68 bytes D. 1522 bytes

Answer: D Question 4 When configuring a default gateway, gatewa y, should it be ip route 0.0.0.0…. or serial 0/0 0.0.0.0……  –  dont  dont know answer Question 5 Which option does the route 0.0.0.0/0 represent?

A. Route with the lowest administrative distance B. Gateway of last resort C. Null route D. Empty routing table

Answer: B Explanation In this question only the “Gateway of last resort” answer is suitable. suitable. A Gateway of Last Resort or Default gateway is a route used by b y the router when no other known route exists to transmit the IP packet. Known routes are present in the routing table. Hence, any route not known by the routing table is forwarded to the default route. In fact this question is a bit unclear. Maybe it implies “creating “creati ng a static route to network 0.0.0.0 0.0.0.0 is another way to set the gateway of last resort on a router.” Reference: https://www.cisco.com/c/en/us/support/docs/ip/routing-information-protocolrip/16448-default.html Question 6 What is the purpose of a standard access list? A. to filter traffic based on destination address B. to deny traffic C. to filter traffic based on source address Answer: C Question 7 If you are in VLAN 10 and it gets a packet fr om VLAN 2 with 802.1q enabled, what does it do with the packet? A. Drops the packet B. forwards it to VLAN 2 C. configures the port to handle traffic from VLAN 2 D. adds it to the VLAN database Answer: A Question 8 Drag drop question about cable types Answer: Coaxial <-> TV connection Twisted <-> 10/100/1000 base