Professional-quality Dyno Kwick Lock Pick gets you in - in a flash! The Kwick Pick fits comfortably in your hand, and opens everything from padlocks t...
Picking the best jewellery for every occasion is a skill that can be improved on.
How to use transaction ST12Descrição completa
How to Use Pathloss
IFTTT is a free web-based service that people use to create chains of simple conditional statements, called applets. An applet is triggered by changes that occur within other web services such as G...
tutorial on how to use powtoon
Abaqus2MatlabFull description
Tutorial to use Easy68K simulatorFull description
sap abap bapi
How to use ADX
User guide how esp8266 01 pin outDescrição completa
Full description
Trading strategy 123; posts from forexfactoryFull description
how to use the healing code
how to use the healing code
Discovering How to Use the Elliot Wave
Descripción completa
Full description
Descripción completa
Master the fundamentals and the more advanced tricks for making the most of this social medium for professionals.Full description
Ansys Aqwa is a tool for calculationFull description
Ansys Aqwa is a tool for calculationFull description
Instruction Sheet c
2002 Fisher Industries, Inc.
Patent No. 6082159 All Rights Reserved
STEP 1
THUMB SCREW
END CAP
HUMP PICK TENSION WRENCH
1. Loosen the thumb screw and slide it forward to expose the pick. Tighten the thumb screw to secure the pick in place. 2. Loosen the end cap counter clockwise to release the tension wrench. STEP 2 pins
position of locked pins
3. Insert the tension wrench into the lock mechanism with no tension. 4. Insert the pick into the lock mechanism with the hump portion of the pick toward the pins. STEP 3
position of pins in step 3
5. Move the pick in-and-out and up-and-down in the lock mechanism while applying slight turning pressure on the tension wrench. (DO NOT FORCE THE TENSION WRENCH) 6. The pick begins to line up the pins to a shear line as the tension wrench applies slight pressure to prevent the pins from dropping back down. STEP 4
position of pins in shear line
7. Once the pick has lined up all the pins to a shear line, the tension wrench, acting as a replacement key, turns to open the lock. 8. If the lock does not open after 5 or 6 attempts release pressure on the tension wrench and repeat steps 2 through 4. WE ASSUME NO LIABILITY FOR MISUSE AND DAMAGE TO LOCKS