The primary objective of this report is to provide a convenient, consistent and accurate method of calculating heating and cooling loads and to enable the designer to select systems that meet the requirement for efficient utilization and are also res
CLIENT ARCHITECT CONSULTANT NAME OF THE PROJECT LOCATION OF THE PROJECT AREA TO BE AIR CONDITIONED TOTAL HEIGHT BOTTOM OF BEAM FALSE CEILING HEIGHT AREA OCCUPANCY LOAD OF COMPUTERS EQUIPMENT LOAD LIGHT LOAD FLOOR ABOVE FLOOR BELOW OUTSIDE TEMP INSIDE TEMP RELATIVE HUMIDITY AIR CHANGE / HOUR CFM / PERSON EXPOSED WALL NORTH SOUTH EAST WEST NORTH EAST SOUTH EAST SOUTH WEST NORTH WEST EXPOSED GLASS NORTH SOUTH EAST WEST NORTH EAST SOUTH EAST SOUTH WEST NORTH WEST PARTITION TONNAGE TOTAL CFM TONNAGE AS PER CFM EQUIPMENT SELECTED
