THIS SPREAD SHEET CAN BE USE TO CALCULATE THE HEAT LOAD IN BTU FOR SPECIFIC ROOMFull description
The primary objective of this report is to provide a convenient, consistent and accurate method of calculating heating and cooling loads and to enable the designer to select systems that meet the requirement for efficient utilization and are also res
Electrical Load calculation The maximum electrical load that would be coming from the SERVICE BLOCK in Al Warqa-4 plot no. 424-2640 will be as below:
Maximu m load Sl.No.Appliance typeQuantity (KW) 1 A.C. units (Split type) 2 pieces
5
2
Heaters
2 pieces
5
3
Booster pump
1 piece
0.2
Fans
5 pieces
0.5
4
Light fittings
20
2.5
5
Socket outlets
11
5
TOTAL=
18.2
As it is seen from the attached file of 'SUMMARY OF TOTAL CONNECTED LOAD' for the MAIN VILLA, 24KW energy is reserved for the future extension. The maximum energy demand coming from the SERVICE BLOCK is 18.2KW.
