HDI 3500 Service Manual Part 2

4730-0036-02

HDI 3500 Service Manual

Page 301 Change History: 150.XX Software Releases

New Features All features of the the previous software software version (150.24 software). software). There There are no new feafeatures released with this software version.

Problems Corrected •

•

•

•

•

•

•

Corrects an intermittent problem that prevents prevents the Doppler spectral trace from updating when the sample volume cursor is moved. moved. Improves system response to the Freeze control. Also improves system response times due to TGC slidepot or other control activation during periods of high PCM activity. Corrects an issue with the OB graph causing current measurement values to not be displayed displayed in the th e year 2000. Adds a low-level low-level optical disk format option to the user diagnostics di agnostics menu. Performing Performing a low-level low-level optical disk format enables faster disk operation. Allows the user to perform a CW exam using the D2CW probe when the BPT9-5 scanhead is connected. con nected. Previously, Previously, there was no Doppler signal when this t his was attempted. Prevents Prevents the system from hanging after deleting all images from the hard disk if one of the images is not readable. Unreadable images may result from turning off the system before the image has been fully saved to disk, a hard disk error, or a power supply problem. Corrects a DiskLink issue with the patient exam directory showing patient exams as being sent to the optical disk when they are not.

4730-0036-02

HDI 3500 Service Manual •

•

•

•

•

•


Corrects an issue preventing preventing the time t ime from displaying during system bootup. Previously, ously, performing a system reboot corrected the problem, but system reboot had to be done with the circuit breaker. breaker. Fixes blue banner messages reporting FEC line sequencer errors when in 2D-PW. Eliminates errors caused by the system being unable to update after a menu selection following another menu selection. Prevents the system from hanging under certain conditions when a measurement Select is pressed when the cursor is in a scroll bar. protocol is used and Select is Fixes intermittent crashes occurring after the bootup splash screen. Fixes an intermittent blue banner error message ( FILE:VPM clock monitor. Line Number 400 ) occurring on system bootup. “

”

•

Corrects an intermittent problem causing the time to disappear from the display after system bootup. Attempts to shut the system off with the Standby switch failed. The issue was seen primarily on PAL systems.

Known Problems Refer to Operating Notes: 4707-0036-04

English

4777-0036-04

German

4787-0036-04

French

4797-0036-04

Spanish

4807-0036-04

Dutch

4817-0036-04

Swedish

4827-0036-04

Italian

4730-0036-02


•

•

•

•

•


Corrects an issue preventing preventing the time t ime from displaying during system bootup. Previously, ously, performing a system reboot corrected the problem, but system reboot had to be done with the circuit breaker. breaker. Fixes blue banner messages reporting FEC line sequencer errors when in 2D-PW. Eliminates errors caused by the system being unable to update after a menu selection following another menu selection. Prevents the system from hanging under certain conditions when a measurement Select is pressed when the cursor is in a scroll bar. protocol is used and Select is Fixes intermittent crashes occurring after the bootup splash screen. Fixes an intermittent blue banner error message ( FILE:VPM clock monitor. Line Number 400 ) occurring on system bootup. “

”

•

Corrects an intermittent problem causing the time to disappear from the display after system bootup. Attempts to shut the system off with the Standby switch failed. The issue was seen primarily on PAL systems.


English

4777-0036-04

German

4787-0036-04

French

4797-0036-04

Spanish

4807-0036-04

Dutch

4817-0036-04

Swedish

4827-0036-04

Italian

4730-0036-02



4837-0036-04

Finnish

4847-0036-04

Brazilian

4877-0036-04

Por tuguese

4887-0036-04

Danish

4907-0036-04

Greek

Hardware Changes There are no hardware changes.

151.09 (8.5.4 build level)

Released SW P/N 4252-0886-09 on March 15, 2001. Field upgrade SW P/N 4252-0886-09

New Features •

All features released with the previous software, version version 151.06

•

New ATL ATL C8~5 curved cu rved array scanhead (P/N (P/ N 4000-0800-XX)

C8-5 Curved Array Scanhead The ATL-made ATL-made C8~5 scanhead (P/N 4000-0800-XX) looks and performs the same as the previously released C8-5 Thompson-made scanhead, but has better mechanical integrity and improved improved reliability. reliability. The redesigned ATL-made ATL-made scanhead is identified as C8~ C8~5 on the scanhead connector label and on the system display. display. The scanhead specifications are the same as those t hose for the previously released scanhead and are listed in Sect Se ction ion 15, Scanheads . The new ATL C8~5 scanhead requires a new MO file. Refer to Hot Tip 2000-55 for the C8-5 scanhead replacement strategy for all HDI systems. “

”

“

”

4730-0036-02



Problems Corrected •

The loss of exam data while spooling images to the hard disk due to a pegasus task crash during normal system shutdown.

•

A system crash when the system date rolls while in OB report.

•

Missing key stroke entries in the User Events Log when it is downloaded.

•

Decreases bootup time required for systems with a full hard disk.

•

•

•

•

•

•

Abnormal system behavior under certain operating conditions when the system is in dual imaging and you reselect a scanhead. A high failure rate of the ADAPTR PIT test executed during the Machine Comprehensive Test. System slowdown and lockup in duplex Doppler mode after changing the display format size with only the 2D active. Image from a patient study migrates to the next patient study. Changes imaging thermal limits in AP&I software used by the following scanheads: C5-IVT, L10-5, C9-5 ICT, C8-4, L7-4, P3-2, P 5-3, the Thompson-made C8-5 scanhead (PN 4000-0676-XX), and the ATL made C8~5 scanhead (PN 4000-0800-XX). Prevents the system from pegasus task crashing when selecting Final Report after editing the analysis report. This resolution only affects customers who have an Okidata report printer selected in the Peripherals setup menu.

•

A bright line image artifact appears at the bottom of the sector using THI.

•

French translation error performing the calculation dP/dt, Mitral Regurg.

•

Return the scanhead position function to SH pos key on system keyboard.

4730-0036-02




English

4777-0036-06

German

4787-0036-06

French

4797-0036-06

Spanish

4807-0036-06

Dutch

4817-0036-06

Swedish

4827-0036-06

Italian

4837-0036-06

Finnish

4847-0036-06

Brazilian

4877-0036-06

Portuguese

4887-0036-06

Danish

4907-0036-06

Greek

Hardware Changes There are no hardware changes.

4730-0036-02

13


Page 306 Configuration: Compatibility

Configuration

Compatibility

The part number, dash level, and firmware software level of each PCB is determined by the CPU at boot up. The system software contains a hardware and software configuration file that lists the part numbers and dash levels of installed PCBs and PROMs. If a different dash level PCB or PROM is installed, and Save as Installed is then selected, this file is updated. This should only be done if the replacement has been determined to be compatible with the system configuration. The original configuration information cannot be retrieved after this file is modified. Refer to “Troubleshooting” on page 172 for more information. “

”

Hardware configuration and compatibility must be based on the information in the PCB and PROM replacement matrices. Hardware configuration involves verifying the PCBs and PROMs are compatible with the specific system software.

Usage Rules for PCB Matrices

1. Find the matrix for the PCB to be ordered. The PCB matrices are listed by slot location. The front card cage PCBs are listed first as they are installed from left to right, then the back, from left to right. 2. Find the software column matching the system software. 3. Find the PCB with an R in the software column. “

”

4. If there is more than one R , select the one with a Y that matches the system's features. Order that PCB. “

”

“

”

5. If there is no R option, use the following information to choose a PCB: “

-

”

A indicates alternate . The factory may ship an alternate (equivalent) PCB instead of the PCB ordered. “

”

“

”

4730-0036-02


Page 307 Configuration: Usage Rules for PROM Matrices

-

L means Like-for-Like . Only order this PCB if the part number and dash level are exactly the same as the PCB being replaced.

-

C indicates this PCB is compatible with the software and PCBs in the same column.

“

“

”

“

”

”

6. Refer to the PROM matrix if the PCB requires firmware.

Usage Rules for PROM Matrices

A number of PCBs require operating software PROMs (firmware). The software for the CPU determines the overall system software level (for example, 23.04). The software on other PCBs will never be higher than that of the CPU, and can be at a lower level. System features may or may not be compatible with a specific PCB revision. The different codes that can be found here are: Y - yes, feature is compatible with this PCB dash level, N - no, feature is not compatible with this PCB dash level. Order the software PROM kit required by the PCB part number being ordered.

Usage Rules for Jumper and PROM Diagrams

•

There are no jumpers that require configuration by field service representatives.

•

There are no switches on PCBs.

•

•

•

•

•

There are no diagrams for PCBs that do not have jumper headers or firmware PROMs installed. The relative position of firmware PROMs and certain jumpers are shown on the jumper and PROM diagrams. Only those jumpers requiring headers are shown on these diagrams. Jumpers requiring a jumper header are shown only for reference when verifying their integrity. If the jumper has three pins, the physical position of the header is indicated.

4730-0036-02


System Software

Page 308 Configuration: System Software

It is understood, if jumpers are not shown on the diagram, they are either hardwired or are not jumpered with a header.

Part numbers for Software Files listed in Table 13-1 are for reference because the part number is displayed on the system monitor (Setups - Diagnostics - Show Machine Configuration) and on the Operating Notes. Machine Option (MO) files must be ordered for a specific system. Request optical disk 4252-0738-01 and specify the system S.O. and I.D. numbers. An optical disk will then be created for that system I.D. Follow your local upgrade program to order upgrade disks. Upgrade disks with system software automatically back up the old system software and machine options, copy the new software, perform the software integrity scan, and transfer user presets. Messages are displayed on the system monitor to provide status of the installation process. If an error is detected during the installation process, the system automatically restores the previous software.

.

4730-0036-02


Table 13-1 Software Level

System Software Level Part Numbers Build Level

Part Numbers Software Files1

Dash

150.23

8.5.1

4252-0831

06

150.24

8.5.2

4252-0831

07

151.06

8.5.3

4252-0886

05

1.

Page 309 Configuration: Repairing DDEA Modules

Upgrade Disk w/System S/W

Notes

4252-0896-05

The part numbers in this column are for reference only and cannot be ordered. Software language is generic. Language displayed is determined by customer Machine Option Files. Upper and Lower Control Panels are in English, French, German, and Italian. To support Danish, Norwegian, Swedish, and Finnish languages, key caps for the Lower Control Panel are available. (Figure 14-33).

Repairing DDEA Modules

Repair all DDEA modules to the component level whenever possible. Order the entire DDEA assembly only when replacing unreliable or unrepairable modules. •

Determine the DDEA configuration, (with or without ECG and MO drive).

•

The DDEA Interface PCB and the optical drive must be ordered like for like.

•

Use Table 13-7 to order a complete DDEA module.

•

Use Table 13-2 to order DDEA replaceable components.

•

Follow Hard Drive Replacement on page 310 in this section for hard drive failures.

•

“

”

When replacing any drive in a DDEA module with a different model, the SCSI bus termination should be checked. Use the figures and tables in Drive Jumper and Switch Settings on page 313. “

”

4730-0036-02



The MO drive SCSI connector must be terminated when the IBM hard drive is installed. DDEA modules with or without an optical drive have the same hard drive SCSI termination settings.

•

Table 13-2 Part Number

3500-3066-02 Table 13-5

DDEA Replaceable Components Part Description

Notes/ Reference

System hard drive kit, IBM 9.1 Gb1

Figure 14-16

Mag Optical Drive, 640 MB, Fujitsu M2513

Figure 14-19

Mag Optical Drive, 640 MB, Fujitsu MCC3064SS Table 13-7 3100-0274 1064-0130-02

DDEA PCB with ECG Physio circuitry

Figure 14-16

DDEA PCB w/o ECG

Figure 14-15

ECG Connector (plastic spacer below may also Figure 14-16 be needed) Spacer, plastic, ECG connector

Figure 14-16

CAUTION

NOTE: HD and MO drives are very delicate. Follow ESD procedures and handle with care to avoid electrical and physical shock damage during hard drive removal and installation.

Hard Drive Replacement

➤

To replace a system hard drive: 1. Verify the hard disk is actually defective by using the Core Bootup Fault Isolation on page 172, and by running Check Installed Software on page 194 under Diagnostics in the Setups menu. Always run the recovery disk when a problem is suspected. If no errors or inconsistent errors are found, it is safe to Skrm and reload software. If “

“

”

“

“

”

”

”

4730-0036-02



errors are found repetitively after loading new software and running the recovery disk several times, the drive should be replaced. 2. If MO files are defective and need to be reloaded, they can be e-mailed. 3. Determine the type of hard drive in the DDEA (IBM or Quantum). Do not order blank hard drives (P/N 2100-XXXX-XX). These have not been formatted for the system and cannot read or write. 4. Drives should not be replaced just for SW upgrades unless it is part of the upgrade. 5. Order one of the following: -

Hard drive kit (Table 13-3, P/N 3500066-02) when replacing a Quantum or non-IBM drive.

-

IBM hard drive (P/N 3500-3129-01) when replacing an IBM hard drive installed in the system.

6. Extreme care should be taken when holding a drive. Always hold drive by the sides, taking caution not to touch or bump any printed circuits, electrical components, or moving mechanical parts. 7. Do not rest the drive on any surfaces other than the static mat, approved packing materials, or the actual mounting position of DDEA. 8. All drives are to be handled using static discharge prevention methods with static mats and ground straps. 9. All replacement drives or hard drives included in upgrade kits and shipping from ATL, will be packaged only in a recommended proper shipping container. 10.Drives that are requested to be returned to ATL Bothell will be expected to be received in that same recommended packaging “

”

4730-0036-02

HDI 3500 Service Manual ➤

•

•

•


To order pre-loaded hard drives, a drive with the correct options and software version, your order must include the following information: A request to have the software and options loaded. The current software level: enter the 4252-XXXX-XX part number on a separate line item. You can get this from the system configuration information in the system setups or refer to Table 13-1. For domestic orders only, a base ID (chip ID) and the machine options part number 4252-0738-01. International made-for-stock orders do not require a base ID.

Table 13-3

Hard Drive Kit

Part Number 3500-3066-02

Components System hard drive kit, IBM 9.1 Gb1

3500-3129-01

•

Notes/Reference

Hard Disk Drive, IBM 9.1 Gb, model 25L1910 IBM 18ES 3.5

Formatted disk Figure 14-15

”

3100-2867-01

•

Cable Adapter to IBM HD connector

3100-2896-01

•

Jumper, PCB pin, for Optical Drive

8000-1938-01

•

Ops Notes Kit

2208-0064

•

Cable Clamp

11.Before installing the drive, set the SCSI jumpers according to Drive Jumper and Switch Settings on page 313. “

”

12.If the DDEA has an MO drive, verify the settings referring to Figure 13-2 and Table 13-5.

4730-0036-02



Drive Jumper and Switch Settings Table 13-4

Hard Drive Jumper/LED Status1 Jumper/LED Status2

Drive Part Number

Drive Size3 (MB) A0

2100-1445-01

2100

OFF OFF OFF

2100-1517-01

3200

OFF OFF OFF

2100-1636-014

9100

OFF OFF OFF OFF JP4-6 JP4-5 JP6-G ON ON ON

A1

A2

P0

PK

TE

LED

Reserved

-

OFF

ON

OFF

OFF

-

OFF

ON

OFF

OFF

1. Jumper positions listed are for DDEA module with MO drive installed. DDEA modules without MO drive have no jumpers installed. 2. OFF indicates a jumper is not connected, ON indicates a jumper is connected. The dashes indicate no jumper available on that hard drive. 3. All hard drives are formatted to 2100 MB because of operating system constraints. 4. The 2100-1636-01 IBM hard drive requires the 3100-2867-01 68 to 50-pin adapter. Hard drive jumper positions are the same for DDEAs, with or without MO drives installed. If no MO drive is installed, connect a terminator to the connector on the front of the DDEA module.

4730-0036-02


Option Jumper Block J-6

A

E

Reserved Reserved Reserved Reserved Reserved

F

Open

B

Ground

C D

Open SCSI bus

( )


Ground

1 ( 2 ) ( 3 ) 4 ( ) 6 7

8 9

LED anode

1 0 1 1 1 2


Position A J-6

Enable terminal pwr supply

r o t c e n n o C

Position G PCB Position 1 J-4

DAS3 DAS2 DAS1

Option Jumper Block J-4 Position 12

SCSI ID

DAS0 Enable auto spin up (68 pin) Disable auto spin up (80 pin) Force SE mode Disable unit attention Enable TI-SDTR/WDTR Enable auto start delay Delay start 6/12 Disable SCSI parity check LED cathode


Note: 80 pin models do not have Option Jumper Block J-6.

- Location of Option Jumper Blocks -

- Jumper settings for 68/80 pin LVD/SE multi-mode models -

Figure 13-1

IBM Hard Drive SCSI Termination

4730-0036-02

Table 13-5



Magneto-Optical Drive Switch/Jumper Positions Switch/Jumper Positions

Drive Part Number Drive Size (MB) 2100-1416-01

2100-1512-01

1

2

3

4

5

6

7

OFF OFF ON

8

540/640

SW1 OFF OFF ON

540/640

SW2 OFF OFF OFF OFF OFF OFF OFF OFF

540/640

CNH OFF OFF OFF

640

SW1 OFF OFF ON

-

-

-

OFF OFF -

OFF OFF ON OFF

OFF

4730-0036-02


Page 316 Configuration: Replacement Code Legend (All Matrices)

Power connector

Set switch 8 to ON to enable the SCSI termination.

SCSI connector

CNH1 246

SW1

OFF Drive switch location 135

12345678 ON

- Fujitsu optical drive rear view SCSI ID

TERM

NORM

1 2 3 4 5 6 7 8

- Epson optical drive rear view -

Figure 13-2

MO Drive SCSI Termination

Replacement Code Legend (All Matrices)

R A C L Y

- Top view of Panasonic optical drive -

Recommended replacement level. Alternate acceptable replacement level. PCB is compatible with software, but is no longer stocked. Order like for like. Yes, compatible with feature.

4730-0036-02


N -

Page 317 Configuration: PCB Replacement Tables

Not compatible with feature Indicates incompatibility for a specific software version

PCB Replacement Tables Table 13-6

PS1,2,3

7500-1342

Replacement Levels

Dash No.

150.23 and up

06, 08,

L

07,10,11

L

Table 13-7

Part Number 3500-2760 03,04, 05, 06 07,

Power Supply Module (PSM)

Notes

A1F

Disk Drive ECG Audio PCB (DDEA)

Replacement Levels

Features

150.23 and up

ECG/ Physio ECG

Disk Link MO

Hard Disk Notes

A

N

N

Y

640

2.1

1, 2, 3, 5, 6

R

N

N

Y

640

2.1

1, 2, 3, 5,6

4730-0036-02


Table 13-7

Part Number

A1F


Disk Drive ECG Audio PCB (DDEA) (Continued)

Replacement Levels

Features

150.23 and up

ECG/ Physio ECG

Disk Link MO

Hard Disk Notes

3500-2761 03,05, 07, 08, 09

R

Y

Y

Y

640

2.1

1, 2, 3, 4

3500-2762 02, 04, 05

R

Y

Y

N

-

2.1

1, 2, 3, 4

1. When placing an order for a DDEA module, specify the following information in the work order comments section: 1) the DDEA hard drive should be programmed, 2) the correct system software level, 3) any machine option changes from options listed in CCMS customer service database, and 4) Machine ID number located on the Show Machine Configuration Option of system diagnostics. 2. System-specific system software and MO files must also be ordered for replacement hard disk drives. However, if a backup copy of the hard drive has been created on a magneto optical disk, the copy may be used to re-create the system files and data on the hard drive. 3. Disk drives are listed in megabytes. The HD is formatted to 2.1GB. The MO drive supports 128, 230, 540 MB disks. 4. Made from 7500-1020-XX PCB. 5. Made from 7500-0843-XX PCB.

4730-0036-02



6. May have 2.1 GB hard drive (P/N 2100-1445-XX), 3.2 GB hard drive (P/N 2100-1517-XX), or 9.1GB hard drive (P/N 2100-1636-XX). All drives are formatted to 2.1 MB because of operating system constraints.

Table 13-8

A4F

Front End Controller PCB (FEC)

7500-1529 Replacement Levels

Features

Dash No.

150.23 and up

ECG/ Physio

01

R

N

02

R

03

R

Table 13-9

A4F

FEC PROMs

7500-1529 PROM Kit

Replacement Levels

Dash No.

150.23 and up

01,02,03

Part No. 8000-1579 01

Notes

R

Location, P/N, Dash U24

4201-2011 02

U25

4201-2012 02

U10

4201-1582 08

4730-0036-02


Table 13-10

A4F


FEC PROM Checksums and CRCs

Dash PROM Part No. No.

Check sum CRC

4201-1582

08

4C23

CCA3

4201-2011

02

3593

6100

4201-2012

02

EB6A

6100

4730-0036-02



U24

U25 U10

1 JP5

JP8

Figure 13-3

FEC Jumper and PROM Locations

1

4730-0036-02


Table 13-11

A5F

Analog Interface Module PCB (AIM)

7500-0977 Replacement Levels Dash No.

150.23 and up

06, 09

R

Table 13-12


Features Notes

A6F

Doppler Acquisition PCB (DOPACQ)


Features

Dash No.

150.23 and up

09

A

Y

Y

11

R

Y

Y

Table 13-13

CW TCD

ST CW CW TCD Notes

A7F - A11F


150.23 and up

07,08, 09

R

Channel Board PCBs (CB) Features Notes

4730-0036-02


Table 13-14


A1B Internal Interface Module PCB (IIM)


150.23 and up

01

R

Table 13-15

Notes

A2B

Peripheral Interface Module PCB (PIM)


150.23 and up

03

A

04,06

R

Table 13-16

Features

Features Notes use with ISEM

A3B

Pixel Conversion Module (PCM)


Features

Dash No.

150.23 and up

Frame Disk grab Link

03

R

Y

Y

04

R

Y

Y

Notes

4730-0036-02


Table 13-17

A3B

PCM PROMs

7500-1408 PROM Kit

Replacement Levels

Dash No.

150.23 and up

03, 04

Part No. 8000-0991 03

Table 13-18

A3B

Dash PROM Part No. No. 4201-1718

09


R


PCM PROM Checksums and CRCs

Checksum CRC CAD5

F557

4201-1718 09

4730-0036-02



S1 U23

1 JP1

Figure 13-4

PCM Jumper and PROM Locations

S1 = PCB RESET SWITCH

4730-0036-02


Table 13-19

A4B


Pixel Space Processor 2 (PSP2)


150.23 and up

09

R

Table 13-20

Features Card. Y

A5B

Features

Dash No.

150.23 and up

ST CW

14

R

Y

A5B

Replacement Levels

Dash No.

150.23 and and up

14

8000-0992 04

Notes

PSP1 PROMs

7500-0713 PROM Kit Part No.

No PROMs

Pixel Space Processor 1 (PSP1)


Table 13-21

Notes

Loca Locati tion on,, P/N, P/N, Dash Dash

R

U55

4201-1697 13

U134 4201-1582 08 U1

4730-0036-02


Table 13-22

A5B



PSP1 PROM Checksums and CRCs

Check sum CRC

4201-1697

13

03E3

B4B9

4201-1582

08

4C23

CCA3

4730-0036-02



U55

U134

JP19 1

1 JP21

Figure 13-5

PSP1 Jumper and PROM Locations

4730-0036-02


Table 13-23

A6B


System CPU (CPU)


Features

Dash No.

150.23 and up

Notes

01, 02, 03

R

32 MB

Table 13-24

A6B

CPU PROMs

3500-2677 PROM Kit

Replacement Levels

Dash No.

150.23 and up

Part No.

01, 02, 03 8000-1663 04

Table 13-25

A6B


Location, P/N, Dash

R

U57

4201-1582 08

R

U68

4201-2015 04

R

U59

4201-2016 04

CPU PROM Checksums and CRCs

Checksum CRC

4201-1582

08

4C23

CCA3

4201-2015

04

EF4F

758D

4201-2016

04

38A3

758D

4730-0036-02



Note: When replacing the CPU PCB, remove the ID chip (B1) and install it on the ID replacement CPU PCB. B1 U57 U59

U68

Figure 13-6

CPU PROM Locations (3500-2677-XX)

4730-0036-02


Table 13-26

A8B

Part Number


Image Memory PCB (IMEM)

Replacement Levels

Features

150.23 and up

Disk Link

3D CPA

Notes

3500-1867 011

R

Y

Y

with SIMMs, 32 MB, w/o DiskLink

3500-2757 012

R

Y

Y

with SIMMs, 64 MB, for DiskLink option

1. 3500-1867-XX comprises 7500-0776-04 PCB and two 16 MB SIMMs. 2. 3500-2757-XX comprises 7500-0776-04 PCB and four 16 MB SIMMs.

Table 13-27

A9B

Adv. Digital, Aud., Physio, &Translator(ADAPTR)


Dash No.

150.23 to 150.24 150.24 and up

01

A

02

R

03

R

04

N

R

Features

Notes

4730-0036-02


Table 13-28

A9B

ADAPTR PROMs

7500-1328 PROM Kit

Replacement Levels

Dash No.

150.23 150.24 and up and up

01, 02,

Part No. 8000-0995

03

R

03, 04

A9B



R

Table 13-29


4201-1693 08

U56

ADAPTR PROM Checksums and CRCs

Checksum CRC

4201-1582

08

4C23

CCA3

4201-1693

08

71CB

63A5

4730-0036-02



U52 U56

Figure 13-7

ADAPTR PROM Locations

4730-0036-02


Table 13-30

A11B


Sample Space Processor (SSP)


150.23 and up

07

A

09

R

Table 13-31

Features Notes

A11B

SSP PROMs

7500-0768 PROM Kit

Replacement Levels

Dash No.

150.23 and up

07, 09,

Part No. 8000-0997 -02

Location, P/N, Dash

A

U32

10

8000-0997 -02

R

4201-1694 07

U113 4201-1582 08 U32

4201-1694 07

U113 4201-1582 08

4730-0036-02


Table 13-32

A11B



SSP PROM Checksums and CRCs

Checksum CRC

4201-1582

08

4C23

CCA3

4201-1694

07

8956

99CD

4730-0036-02



U32

U113

Figure 13-8

SSP PROM Locations

4730-0036-02


Table 13-33

A12B

Advanced IF Output Module (AIFOM)


150.23 and up

01

A

02

R

Table 13-34


Features Notes

A13B

AIFOM PROMs Replacement Levels

Part No.

PROM Kit Part 150.23 No. and up

Location, P/N, Dash

7500-1413 01 8000-1374- 01

A

U26

4201-1961

01

7500-1413 02 8000-1374- 01

R

U20

4201-1962

01

U49

4201-1582

08

Table 13-35

A13B

Dash PROM Part No. No. 4201-1582

08

AIFOM PROM Checksums and CRCs

Checksum CRC 4C23

CCA3

4730-0036-02


Table 13-35

A13B



AIFOM PROM Checksums and CRCs

Checksum CRC

4201-1961

01

0844

540C

4201-1962

01

67D0

540C

U20 U26 U49 Check these PROM locations.

Figure 13-9

AIFOM PROM Locations

4730-0036-02


Table 13-36


User Interface Module (UIM)


150.23 and up

04

R

Features Notes

Table 13-37

PS5

AC Input Module (ACIM)

Replacement Levels

Features

Part Number

150.23 and up

3500-1577 01

R

100-120 Vac/50 Hz

3500-1578 05

R

120 Vac/60 Hz

3500-1579 03

R

230 Vac/50 Hz

3500-1580 01

R

230 Vac/60 Hz

Table 13-38

Notes

Centerplane PCB (CTRBRD) Replacement Levels

Part Number

150.23 and up

3500-1720 03

R

Features

1. Contains 7500-1006-03 Front and 7500-1008-03 Rear Centerplane PCBs

Notes 1

single AIFOM slot

4730-0036-02


Table 13-39


Scanhead Select Module (S/HSEL) Replacement Levels

Part Number

150.23 and up

7500-0976 02

R

Table 13-40

Features Notes

Upper User Interface Assembly (Control Panel), English Replacement Levels

Part Number

150.23 and up

3500-2955 02

R

Table 13-41

Notes

Lower User Interface Assembly (Control Panel), English Replacement Levels

Part Number

150.23 and up

3500-2954 01

R

Notes

4730-0036-02


Table 13-42


Upper User Interface Assembly (Control Panel), French Replacement Levels

Part Number

150.23 and up

3500-2957 02

R

Table 13-43

Notes

Lower User Interface Assembly (Control Panel), French Replacement Levels

Part Number

150.23 and up

3500-2956 01

R

Table 13-44

Notes

Upper User Interface Assembly (Control Panel), German Replacement Levels

Part Number

150.23 and up

3500-2959 02

R

Notes

4730-0036-02


Table 13-45


Lower User Interface Assembly (Control Panel), German Replacement Levels

Part Number

150.23 and up

3500-2958 01

R

Table 13-46

Notes

Upper User Interface Assembly (Control Panel), Italian Replacement Levels

Part Number

150.23 and up

3500-2961 02

R

Table 13-47

Features Notes

Lower User Interface Assembly (Control Panel), Italian Replacement Levels

Part Number

150.23 and up

3500-2960 01

R

Features Notes

4730-0036-02


Table 13-48

Lower User Interface Assembly (Control Panel), Danish Replacement Levels

Part Number 3500-2962 01


Features

150.23 and up

Notes

R

1, 2

1. Use the 3500-2962-01 Danish Lower UIF with the 3500-2955-02 English Upper UIF. 2. IDs as 3500-2954-01.

Table 13-49

Lower User Interface Assembly (Control Panel), Norwegian Replacement Levels

Part Number

150.23 and up

3500-2963 01

R

Features Notes 1, 2

1. Use the 3500-2963-01 Norwegian Lower UIF with the 3500-2955-02 English Upper UIF. 2. IDs as 3500-2954-01.

4730-0036-02


Table 13-50


Lower User Interface Assembly (Control Panel), Swedish/Finnish Replacement Levels

Part Number

150.23 and up

3500-2964 01

R

Features Notes 1, 2

1. Use the 3500-2964-01 Swedish Lower UIF with the 3500-2955-02 English Upper UIF. 2. IDs as 3500-2954-01.

4730-0036-02

14


Page 346 Parts: Introduction

Parts

Introduction

This section lists parts information for the HDI 3500 system. Replacement parts that are dependent upon system features have the full part number listed in the replacement tables in Section 13, Configuration . “

”

Use the figures and parts table in this section to locate and identify system parts. Part numbers are shown on the illustrations as well as listed and described in the corresponding tables. Figures are keyed to the tables and the tables to the figures, as applicable. Use the part number and description provided as needed to order a part. Verify that the level of replacement for a given part is in accordance with current service philosophy of your area before ordering the part.

Parts Ordering Information

Field Service Engineers For parts ordering procedures, FSEs should refer to their standard operating procedures.

Customers Customers may order parts through an FSE or directly from the ATL Customer Service Order Processing Department. Customers ordering parts through an FSE will need to provide the following information: •

Shipping address

•

Purchase order number of equipment

•

Part numbers or sales order numbers

•

Part descriptions and quantity needed

4730-0036-02

How to Find a Part Number


Page 347 Parts: Parts Ordering Information

In this section, part numbers in the exploded view system illustrations (figures) point to the system parts. The part numbers in these figures link to the parts table (Table 14-1) containing descriptive information about the part. The parts table, arranged as follows, is alphabetized by description for your convenience. Additional tables (Table 14-2) lists the system accessories and () lists peripherals and applicable cables.

Using the Figures and Tables ➤ •

•

How to use the figures and tables in this section: If you need a part number, find the drawing of the part in the appropriate figure. The part number or reference to where the part number appears points to the drawing. If you need the part description, click on the blue part number hypertext link to go to the corresponding item in the parts table. If you have the part number and want to look up the description in the table, use Acrobat Reader s Find function to locate the part number. Then, if needed, you can click on the blue hypertext figure link to go to the corresponding illustration. ’

•

If you are using a printed version of this manual and need more than just the part number shown on the figure, the parts are alphabetized in the table by description so you can look up the part by description.

4730-0036-02



Parts Table Definitions Located On. This column lists all of the figures on which the part is found. Part Number. This column lists the part number for an item. Use this number when ordering parts from ATL. If a table is referenced in this column, the part number is on that table. For example, the part numbers for cables and many PCBs are in Section 11, Cabling , and Section 13, Configuration , respectively. “

”

“

”

If an item does not include a part number, this indicates that the item is included for reference, but is not a field-replaceable part. Part Description. The name of the item or part is listed here. Where appropriate, the description column also includes size, tolerance, type or model, and material data for the part. Table 14-1 is alphabetized by this column. Attaching parts must be ordered separately. They are not provided with the assembly, subassembly, or component being attached. Notes/Reference. Manufacturer's part numbers, sometimes alternate part numbers, special applications, and other information pertaining to a specific part are listed in the Notes/Reference column. For top assemblies containing many replaceable parts, the applicable figure or table for further breakdown of parts is listed here. Other references are here if the part requires special cabling, setup, or assembly instructions.

Figure Definitions Part Number. The part number for each part or subassembly shown in an illustration is a hypertext cross-reference linking to the table containing parts descriptions and additional information. See Figure. See Figure is a hypertext cross-reference linking to a detail (sub-assembly) figure where another detail figure or the part number hypertext link cross-reference “

”

4730-0036-02



appears. Or a reference to the table containing parts descriptions and additional information. See Table. See Table is a hypertext cross-reference linking to the table containing parts descriptions and additional information. “

”

4730-0036-02


Page 350 Parts: Parts Illustrations

Parts Illustrations VCR support See Figure 14-31 Upper UIF assembly See Figure 14-33

Video monitor assembly See Figure 14-25

Lower UIF assembly See Figure 14-33

3500-1535-01 3500-1730-01

See Table 14-1

Figure 14-1

HDI 3500 Main Components and Option

4730-0036-02



1065-5221-02 1065-5223-02 1065-5222-01 1065-5224-01 1065-4638-01 3000-0681-01 1065-2254-04 1065-4695-01 See Figure 14-4

1518-0051

1065-4694-01 See Table 14-1

Figure 14-2

HDI 3500 System, External Small Parts (1 of 2)

4730-0036-02



3500-2739-01 1065-2370-02

1541-0002

1065-4637-02

See Table 14-1

Figure 14-3

HDI 3500 System, External Small Parts (2 of 2)

4730-0036-02



1065-2899-01 1065-2901-01

3500-1834-01 Cable drape assembly

See Table 14-1

Figure 14-4

Cable Drape Assembly

4730-0036-02



See Figure 14-14

See Figure 14-7

1560-0051 1518-0043 See Figure 14-12

7500-0976-xx

See Table 14-1

Figure 14-5

2950-1148-01

HDI 3500 System, Front (1 of 2)

4730-0036-02



1065-5222-01 1065-5224-01 1065-5221-02 1065-5223-02

1516-0113

3500-1877-01

3500-1876-01

See Table 14-1

Figure 14-6

HDI 3500 System, Front (2 of 2)

4730-0036-02



1065-2882-03

1065-2973-01

1516-0113

1065-2954-01

4100-1548-01 1065-2953-01

3500-1871-03 Front cover assembly

See Table 14-1

Figure 14-7

1516-0113

Front Cover Assembly

4730-0036-02


1065-2385-04


1065-2386-01

See Figure 14-10

See Figure 14-22

2601-0052-05

See Figure 14-11

1065-2254-04 See Figure 14-12 See Table 14-1

Figure 14-8

1560-0051

7500-1291-xx See Figure 14-21

1518-0043

HDI 3500 System, Rear (1 of 2)

1541-0002 2950-0782-01

4730-0036-02



1065-4945-01

1516-0113

1065-4704-01 1065-2255-06

See Table 14-1

Figure 14-9

HDI 3500 System, Rear (2 of 2)

3500-1878-04

4730-0036-02



1065-2892-03

4100-1255-01

4100-1387-01

4100-1256-01 4100-0961-02 2950-1179-01 (Not part of assembly) 4100-1548-01

1560-0051 1518-0043 3500-1872-02 Rear cover assembly

See Table 14-1

Figure 14-10

Rear Cover Assembly

4730-0036-02



3500-1514-03

2100-0839-01 2100-0856-01

1065-2365-03

1516-0074 1541-0002 See Table 14-1

Figure 14-11

24VDC Fans (Rear Panel)

4730-0036-02


Front caster assembly 2950-0657-08 2950-1389-01


Rear caster assembly 2950-1278-03 2950-1388-01

1530-0360-01 1530-0157-01 1560-0020

1065-2611-02

1519-0034 1561-0001 See Table 14-1

Figure 14-12

1065-5096-01 (Inside Frame)

2950-0818-02 2950-1447-01 2950-0857-01

Caster Assembly, Swivel Type (Front and Rear)

4730-0036-02



2950-0857-01 1560-0020 2950-0818-02

1561-0001 1519-0022

See Table 14-1

Figure 14-13

1544-0012

System Casters, Axle Type (Rear)

2950-1278-01 Axle type caster assembly

4730-0036-02


DDEA module assembly Without ECG See Figure 14-15 Physio See Figure 14-16 Without MO drive See Figure 14-17 Without ECG, MO and physio See Figure 14-18


7500-0762-xx 7500-0977-xx 7500-1529-xx

7500-0974-xx C C C C C C C C H H H H H H H H 0 1 2 3 4 5 6 7

PS1

PS2

PS3

A1F

A2F A3F A4F

A5F A6F

A7F A8F

A9F A10F A11F A12F A13F A14F

1065-2732-02 7500-0976-xx

Centerplane assembly (behind modules)

3500-1720-xx 7500-1342-xx

See Table 14-1

Figure 14-14

Card Cage, Front

1563-0258-01

4730-0036-02


Dependency kits 8000-1900-01 8000-1969-01 8000-2001-01

1541-0002


See Figure 14-19

3500-1482-03

1065-1946-05

2100-1517-01

1065-4681-01

7500-0843-xx 1516-0113

2950-1041-01 2950-1040-01

1065-1947-03 1541-0002

3100-1387-01

9903-0338-01 See Table 14-1

Figure 14-15

3600-0246-01

DDEA Module Assembly (Without ECG)

3500-2760-xx DDEA Module assembly

4730-0036-02


Dependency kits 8000-1900-01 8000-1969-01 8000-2001-01


See Figure 14-19 3500-1482-03

1065-1946-05

See Table 13-3 for HD Kit 1541-0002

3500-3129-01 7500-1020-xx 3100-0274

1065-4681-01

1516-0113 1065-1947-03 3100-1387-01

1541-0002 3500-1835-01

See Table 14-1

Figure 14-16

1064-0130-02

9903-0338-01 3600-0246-01

DDEA Module Assembly (Physio)


4730-0036-02



See Figure 14-20

Dependency kits 8000-1900-01 8000-2001-01

1065-1946-05 2100-1445-01

See Figure 14-20 7500-1020-xx 1516-0113 1065-1947-03 3100-1387-01

1541-0002 3500-1835-01

See Table 14-1

Figure 14-17

1064-0130-02

9903-0338-01 3600-0246-01

DDEA Module Assembly (Without MO Drive)


4730-0036-02



See Figure 14-20 1065-1946-05 2100-1324-01 2100-1517-01 See Figure 14-20 7500-0843-xx 1516-0113 2950-1041-01

1065-1947-03

2950-1040-01 3100-1387-01

1541-0002 9903-0338-01

See Table 14-1

Figure 14-18

3600-0246-01


DDEA Module Assembly (Without ECG, MO Drive and Physio)

4730-0036-02


See Figure 14-15 and Figure 14-16 for parent assembly


1514-0060

1516-0076

2950-1164-01

3500-1483-03

1539-0003 1560-0065 1065-5058-01 1065-2244-03

1065-4682-01

1541-0002 See Table 14-2

See Table 14-1

Figure 14-19

2275-0234-01

2100-1416-01 2100-1512-01

MO Drive (DDEA Module)

3600-0242-01

4730-0036-02


See Figure 14-17 and Figure 14-18 for parent assembly


1514-0060

2208-0003

1065-2997-01 1514-0060 3100-2383-01 1065-2951-02 3500-1851-01

1530-0269-01

3500-1482-03

1530-0269-01 See Table 14-1

Figure 14-20

2950-1039-01

Non MO Drive Connector Bracket (DDEA Module)

4730-0036-02



7500-0713-xx 7500-0714-xx 7500-1408-xx 7500-1398-xx 7500-1291-xx A 1 B

A 2 B

A 3 B

A 4 B

3500-2677-xx 3500-1867-xx or 3500-2757-xx 7500-1328-xx 7500-0768-xx 7500-1413-xx A 5 B

A 6 B

A 7 B

A 8 B

A 9 B

A 10 B

A 11 B

A 12 B

A 13 B

PS5

PS4

ON

OFF

3500-1577-xx 3500-1578-xx 3500-1579-xx 3500-1580-xx

SCSI

2265-0056-02 2275-0391-01 2275-0324-01 2275-0388-01

See Table 14-1

Figure 14-21

Card Cage, Rear

4730-0036-02



1 2 100-120 V∼ 3 50 Hz 4 1450 VA 5 6 7

Ac input module assembly 3500-1577-xx 3500-1578-xx 3500-1579-xx 3500-1580-xx Circuit Breaker Switch 3100-2148-01 2208-0143-01 2208-0144-01 3402-0026-01 See Table 14-1

Figure 14-22

AC Input Module Assembly

ACIM (PS4)

4730-0036-02


2950-0512-01


1530-0145-01

Power transformer assembly 2601-0052-05 2950-0613-01

1065-2498-02

See Table 14-1

Figure 14-23

Power Transformer Assembly

4730-0036-02



OEM transformer assembly 2601-0071-01

1065-2533-02

1543-0002

3700-0175-01 2950-0513-01 1516-0074

1065-3019-01

See Table 14-1

Figure 14-24

OEM Transformer Assembly

4730-0036-02



2950-0587-01

Monitor assembly 3500-3040-03 3500-2532-13 3500-2532-14

See Figure 14-27

See Figure 14-26

See Figure 14-28

2950-0586-01 1065-1789-08 1065-5131-01 1518-0051

1630-0098-01 1560-0051 See Table 14-1

Figure 14-25

Video Monitor Assembly

1065-4691-02

4730-0036-02



See Figure 14-25 for parent assembly

3500-2613-01

2275-0393-01 2405-0124-01 2950-1161-01

2100-1346-09 2100-1589-03

4600-0271-01 1630-0090-01 1065-4314-03 3500-2752-01 1565-0071-01

1065-4548-01 1530-0327-01 1560-0050 1562-0016 1065-4502-01

2208-0147-01

2100-1235-01 1065-4501-01 3500-2614-02

See Table 14-1

Figure 14-26

1065-4345-02

Video Monitor Chassis

7500-1667-03 7500-1312-02

4730-0036-02



See Figure 14-25 for parent assembly 3500-2614-02

1065-4317-02

7500-1313-03 1065-4233-03

1516-0074 1560-0061 1516-0113 See Table 14-1

Figure 14-27

Video Monitor Bezel

4730-0036-02



1065-4503-02 3500-2632-02 1065-4671-01 2100-1403-01 1065-4504-02

2950-1155-01

9901-0035 3500-2631-02 Microphone module assembly

See Table 14-1

Figure 14-28

Microphone Module Assembly

4730-0036-02



1065-2438-01

1530-0297-01

1065-2439-01 1065-2682-02 1065-2439-01 See Fi Figu gure re 14 14-3 -30 0

1065-4565-03

1065-2372-04

1560-0051 1543-0002 See Table 14-1

Figure 14-29

Monitor Tilt Base Assembly

1544-0012 3500-2812-03 Monitor tilt base assembly a ssembly

4730-0036-02



See Fi Figu gure re 14 14-2 -29 9 for for parent assembly CAUTION To prevent damage to the monitor, latches must be in the locked position on both sides of the monitor before moving the system.

Locked Rod Unlocked 3000-0363-04 1065-2682-02 Use a metal rod or a screwdriver screwdriver to rotate latch handle to lock lo ck or unlock latch. See Table 14-1

Figure 14-30

Monitor Tilt Base Latches

3000-0363-04 (Installed)

4730-0036-02


2208-0147-01

1630-0098-01

1065-2683-01


Slide

2100-0843-01 1065-1803-05 1065-3021-01

Panasonic MD830 VCR

1630-0058-01

Microphone mounted with a VCR See Table 14-1

Figure 14-31

VCR Support (Monitor)

4730-0036-02



1065-4264-02 1065-4263-01

See Table 14-1

Figure 14-32

Control Panel (Lock Bar)

4730-0036-02


3500-2771-01 3500-2741-01 2100-1656-01


Upper UIF assembly 3500-2955-xx 3500-2957-xx 3500-2959-xx 3500-2961-xx 3500-1563-01 3500-2770-01 3500-2639-01

Lower UIF assembly 3500-2954-xx 3500-2956-xx 3500-2958-xx 3500-2960-xx 3500-2962-xx 3500-2963-xx 3500-2964-xx

3500-2771-01 3500-2770-01 To IIM PCB

See Table 14-1

Figure 14-33

Control Panel (Upper and Lower UIF Assemblies)

4730-0036-02



1065-4260-02 See Figure 14-36

See Figure 14-37

3300-0307-01 3500-2639-01 See Table 14-1

Figure 14-34

Command Module

1065-4260-02

4730-0036-02


1518-0051

Cart Weldment

1065-4592-01 See Table 14-1

Figure 14-35

Cart Handle (Cart Weldment)


4730-0036-02



See Figure 14-34 for parent assembly

1543-0002

1530-0156-01

1065-2577-02

1065-2576-02 3500-2721-02 Cable clamp assembly

See Table 14-1

Figure 14-36

Cable Clamp Assembly (Command Module)

4730-0036-02



See Figure 14-34 for parent assembly Inside of command module

1065-4626-03

1530-0027-01

3500-2741-01

3100-1387-01 ee Table 14-1

Figure 14-37

Hand Controller Connector Bracket (Command Module)

4730-0036-02



3500-1857-01 4400-7006-11 The OEM Remote Tray Assembly mounts to the underside of the Command Module Housing. See Figure 14-39

2100-1434-02 2100-1435-02 2100-1370-03 2100-1369-02

ee Table 14-1

Figure 14-38

Integrated Stress Echo Module and Accessories (ISEM)

4730-0036-02



1065-2975-01 1065-2903-06

1516-0113

1516-0005 1516-0074 See Figure 14-40 1518-0043

1517-0014

1560-0046 1530-0046-02

2208-0073

1065-2992-03 1561-0015

See Figure 14-40

1065-2907-04 1065-2991-02

2950-1066-01 1517-0061 3500-1856-03 OEM remote tray assembly

See Table 14-1

Figure 14-39

OEM Remote Tray Assembly (ISEM)

4730-0036-02



See Figure 14-39 for parent assembly 1516-0005

1516-0119 1560-0073

2950-0851-01 1065-2904-05

1065-2905-02 1065-2906-02 1516-0074

See Table 14-1

Figure 14-40

Tray Rod Detent (ISEM)

4730-0036-02



4100-0966-02 4100-1260-01

4100-1260-01 4100-1393-01

See Table 14-1

Figure 14-41

System Labels (1 of 5)

4730-0036-02



4100-0960-01

9903-0338-01 9903-0538-01 4100-1431-01

See Table 14-1

Figure 14-42


4730-0036-02



4100-1568-01

4100-0959-01

See Table 14-1

Figure 14-43


4730-0036-02



OEM remote tray 9903-0338-01

4100-1560-01

4100-0757-01 4100-0299

4100-0297 4100-0296 Footswitch

4100-0993-01

See Table 14-1

Figure 14-44


4100-1238-01 4100-1399-01

4730-0036-02



4100-0958-01

AC Input Module 4100-0942-02 4100-0943-02 4100-0944-02 4100-0945-01

4100-1387-01 9903-0578-01 4100-1531-02

4100-1255-01 4100-1548-01 4100-0971-01

4100-0961-02 See Table 14-1

Figure 14-45

4100-1256-01


ON

4100-0968-01

4730-0036-02


Page 395 Parts: Parts List

Parts List Table 14-1 Located On

HDI 3500 System Parts List Part Number

Part Description

Notes/Reference

Figure 14-29 1065-4565-03

Adapter, Monitor Height/Position

Figure 14-31 2100-0843-01

Adapter, Serial Interface, RS-232

Not shown

2301-0029-01

Adhesive, Bumper

Not shown

2301-0146

Adhesive, Sealant, Anaerobic, Med Str Used on DDEA assy

Figure 14-14 1065-2732-02

Air Deflector, Card Cage

Figure 14-5

Air Filter, Plastic

2950-1148-01

Figure 14-29 3500-2812-03

Base Assy, Tilt with Adapter

Figure 14-25 1065-1789-08

Base, HDI, Color Monitor

Figure 14-28 1065-4503-02

Base, Microphone Module

Figure 14-25 1065-5131-01

Base, Monitor, with Machined Studs

Figure 14-29 1065-2682-02 Figure 14-30

Base, Tilt Mechanism, Fog

Figure 14-26 1065-4345-02

Beam, Mounting, Rear, Monitor

Figure 14-29 1065-2439-01

Bearing, Monitor Swivel

Figure 14-15 1065-4681-01 Figure 14-16

Bezel, DDEA

Figure 14-27 1065-4317-02

Bezel, Monitor, 15", Color

Figure 14-40 1065-2905-02

Block, Detent, Left

Figure 14-40 1065-2906-02

Block, Detent, Right

Figure 14-12 1519-0022

Bolt 1/4-20 x 3/4 Hex St Zn

Alternate

4730-0036-02

Table 14-1 Located On



HDI 3500 System Parts List (Continued) Part Number

Part Description

Figure 14-23 1530-0145-01

Bolt, 1/4-20 x 4-1/2, Hex, St, Zn

Figure 14-24 2950-0513-01

Bracket, Capacitor

Figure 14-20 1065-2997-01

Bracket, Connector, Disk Drive Module

Figure 14-26 1065-4314-03

Bracket, Controls, Monitor, 15-inch Color

Figure 14-19 1065-5058-01

Bracket, Disk Drive, Optical

Figure 14-19 1065-2244-03

Bracket, Disk Drive, Optical, Suspended

Figure 14-11 1065-2365-03

Bracket, Fan

Figure 14-7

1065-2954-01

Bracket, Mounting, Front Cover

Figure 14-9

1065-2255-06

Bracket, Mounting, Rear Cover

Figure 14-24 1065-3019-01

Bracket, Mounting, Transformer

Figure 14-39 1065-2903-06

Bracket, Mounting Tray

Figure 14-37 1065-4626-03

Bracket, Remote D-SUB

Not shown

Bracket, UIF, Ferrite

1065-4980-01

Figure 14-31 1065-1803-05

Bracket, VCR Mounting

Figure 14-31 1065-3021-01

Bracket, VCR Mounting, for Sony SVO-9500MD VCR

Figure 14-8

Brush, Antistatic

2950-0782-01

Figure 14-25 2950-0586-01

Bumper, 5DX.14H, Clr Vinyl, Adhesive Back

Figure 14-2

Bumper Cap Left

1065-4695-01

Notes/Reference

Hitachi systems

4730-0036-02

Table 14-1



HDI 3500 System Parts List (Continued)

Located On

Part Number

Part Description

Figure 14-9

1065-4704-01

Bumper Cap, Rear, Dark Gray

Figure 14-2

1065-4694-01

Bumper Cap, Right

Figure 14-3

1065-4637-02

Bumper, Handle, Self-Adhesive, Dark Gray

Figure 14-2

3000-0681-01

Bumper, Side Strap, w/ext, Dark Gray

Notes/Reference

fits extended frame

Figure 14-26 1065-4548-01

Button, Push, Monitor Control

Not shown

Cable Anchor, 3/4-in Sqr, 70 C, Adhv Back

Secures 3500-2614-xx cable assy to bezel

Figure 14-36 3500-2721-02

Cable Clamp Assembly

See Figure 10-5 for details

Figure 14-4

Cable Drape Assy

2208-0070

3500-1834-01

Figure 14-39 1065-2991-02

Cable Retainer, OEM Remote Tray

Figure 14-39 2208-0073

Cable Strap, #8 Mount, 6-inch Long

Figure 14-20 2208-0003

Cable Tie, 3 7/8-in L, Ny

Figure 11-42 Table 11-35

Cables, Power Distribution


Cables, Signal Interconnect

Figure 14-24 3700-0175-01

Cap, 30 µf, 660 VAC 10%, Xfmr Res Paper

Figure 14-13 2950-1278-01

Caster Assy, Axle, Shock Absorbing

Rear Axle (Light Gray)

4730-0036-02





Part Description

Notes/Reference

Figure 14-12 2950-0657-08

Caster Assy, Swivel, Brake Shock Absorb

Front (Light Gray)

Figure 14-12 2950-1389-01

Caster Assy, with Wheel Brake, Bumper Front Gray (Dark Gray)

Figure 14-12 2950-1388-01

Caster Assy, Swivel/Lock, without Brake, Bumper Gray

Rear (Dark Gray)

Figure 14-12 2950-1278-03

Caster Assy, Swivel/Lock, without Brake, 6 Inch Diameter

Rear (Light Gray)

Figure 11-1 3500-1720-xx Figure 14-14

Centerplane Assy

Table 13-38, config. Figure 11-5, pinout

Not shown

2070-1981-01

Chip, SYSCPU ID, 6-Digit

Requires specific MO files to reflect the machine ID number

Not shown

2208-0198-01

Clamp, CA, 0.187ID, 0.218 Mtg Hole, ST

Not shown

2208-0199-01

Clamp, CA, 0.25ID, 0.218 Mtg Hole, ST

Not shown

1065-4800-01

Clamp, Cable, UIF

Figure 14-10 2950-1179-01

Clamp, Cable, 3/8D, 1/2W, 1/4 Screw, Ins

Power cord restrainer

Figure 14-3

Clamp, Cable, IIM

See Figure 10-6 for details

1065-2370-02

Figure 14-30 3000-0363-04

Clamp Lock Assy, Monitor

Figure 14-39 1065-2975-01

Clamp, Retaining, OEM Remote Tray

4730-0036-02





Part Description

Notes/Reference

Figure 14-16 3100-0274

Connector, ECG, F6C

See Table 13-2

Figure 14-20 3100-2383-01

Connector, Terminator, SCSI, Plug, 2x25

Figure 14-7

3500-1871-03

Cover Assy, Front

Figure 14-10 3500-1872-02

Cover Assy, Rear

Figure 14-34 1065-4260-02

Cover, Command Module

Figure 14-15 1065-1947-03 Figure 14-16 Figure 14-17 Figure 14-18

Cover, Disk Drive Module

Figure 14-7

Cover, Front, Enclosure

1065-2882-03

Figure 14-28 1065-4504-02

Cover, Microphone Module

Figure 14-25 1065-4691-02

Cover, Monitor, 15-inch Color

Figure 14-10 1065-2892-03

Cover, Rear, Enclosure

Figure 14-27 1065-4233-03

Diffuser, Light, Monitor

Figure 14-17 2100-1445-01

Disk Drive, HD, 2.1 GB, SCSI Intfc

Hard drive

Figure 14-15 2100-1517-01 Figure 14-18

Disk Drive, HD, 3.2 GB, SCSI-3, Intfc

Hard drive

Figure 14-19 2100-0791-01

Disk Drive, 3.5-in, 128 MB, Optical

Table 13-7

2100-0858-01


2100-1416-01


2100-1512-01

Disk Drive, 3.5-in, 640 MB, Optical, Fuj.

4730-0036-02





Part Description

2100-1646-01

Disk Drive, 3.5-in, 640 MB, Optical, Fuj.

Notes/Reference

Figure 14-18 2100-1324-01

Disk Drive, HD, 1280 MB, SCSI Intfc

Hard drive

Figure 14-16 3500-3066-02

Disk Drive, IBM HD Kit, 9.1 GB IBM

See To replace a system hard drive: on page 310

Figure 14-16 3500-3129-01

3500-27xx-xx

“

”

Disk Drive, HD, IBM, SCSI, Formatted (Part of HD replacement kit 3500-3066-02)

Hard drive, See Table 13-3

Disk Drive Module (DDEA), A1F

See Repairing DDEA Modules on page 309. “

”

Figure 14-16 3500-2761-xx

Disk Drive Module Assy, Physio

Figure 14-17 3500-2762-xx

Disk Drive Module Assy, Physio, No MO

Figure 14-15 3500-2760-xx

Disk Drive Module Assy, without ECG

Figure 14-18 3500-2763-xx

Disk Drive Module Assy, without ECG or MO Drive

Figure 14-11 2100-0856-01

Fan, 24 Vdc, 120 CFM, 4.7 Inch Square Alternate UL/CSA

Figure 14-11 2100-0839-01

Fan, 24 Vdc, 125 CFM, 4.7 Inch Square UL/CSA

Not shown

Ferrite Core/Case, 0.39D CA, 225z@100, PAL only

2604-0119-01

Table 13-7

Goes on 3500-2616-XX cable assembly

4730-0036-02

Table 14-1




Located On

Part Number

Part Description

Notes/Reference

Not shown

2604-0120-01


Goes on 3500-2633-XX and 3500-2741-XX cable assemblies

Not shown

2604-0121-01


Figure 14-22 3402-0026-01

Filter, Power, Line, 15 A, 250 V, Pnl Mt

Figure 14-7

1065-2973-01

Foam, Bottom, Footswitch Tray

Figure 14-1

3500-1535-01

Footswitch, 3-Position

Figure 14-1

3500-1730-01

Footswitch, 4-Position


Gasket, RFI, Finger Clip, BE-CU, 2.5-in

Figure 14-19 2275-0234-01

Ground Strap, Insul, 6.01 x 0.5 W

Figure 14-38 4400-7006-11

Hand Controller

Figure 14-35 1065-4592-01

Handle Casting

Figure 14-20 2950-1039-01

Handle, MO Drive Cover Plate, DDEA

Figure 14-39 1065-2992-03

Handle, OEM Remote Tray

Figure 14-28 2950-1155-01

Holder, Microphone

Figure 14-12 2950-1447-01

Hubcap, Caster, Bumper Gray

Alternate

Fits on tray

Front and Rear 2 each caster

4730-0036-02





Part Description

Notes/Reference

Figure 14-12 2950-0818-02

Hubcap, Front, Caster Assy

2 ea. caster

Figure 14-13

Hubcap, Rear, Axle Assy

1 ea. caster

Figure 14-28 1065-4671-01

Insert, Foam, Forward, Mic Module

Figure 14-38 2100-1434-02

ISEM, 3.0 Software, 3.5-in 540 MB MO The ISEM mounts to Drive, 64 MB, NTSC the Universal OEM Plate

2100-1435-02

ISEM, 3.0 Software, 5.25-in MO Drive, 64 MB, NTSC

2100-1370-03

ISEM, 3.0 Software, 3.5-in 540MB MO Drive, 32 MB, PAL

2100-1369-02

ISEM, 3.0 Software, 5.25-in MO Drive, 32 MB, PAL

Figure 14-19 2950-1164-01

Isolator, 3.1 Lb Min, 5 Lb Max Load

Figure 14-26 1065-4501-01

Isolator, Speaker, Monitor

Figure 14-23 2950-0613-01

Isolator, Vibration, Xfmr

Figure 14-12 1065-2611-02

Knob, Brake Lever

Figure 14-15 9903-0338-01 Figure 14-16 Figure 14-17 Figure 14-18 Figure 14-42 Figure 14-44

Label, 1.0 x 0.5, Plystr, Wht, Ammo-pak Behind Panel

Figure 14-44 4100-0299

Label, 2D/TM, 4000B, Footswitch

4730-0036-02





Part Description

Figure 14-45 4100-0942-02

Label, ACIM Voltage, 100-120 V/60 Hz

Figure 14-45 4100-0943-02

Label, ACIM Voltage, 100-120 V/50 Hz

Figure 14-45 4100-0944-02

Label, ACIM Voltage, 230-240 V/50 Hz, 7.5A

Figure 14-45 4100-0945-01

Label, ACIM Voltage, 230 V/60 Hz, 7.5A

Figure 14-10 4100-1255-01 Figure 14-45

Label, ADAPTR

Figure 14-44 4100-0993-01

Label, Caution, PCB Removal

Figure 14-45 9903-0578-01

Label, China, CCIB Acceptance

Figure 14-45 4100-1531-02

Label, Chinese ID

Figure 14-10 4100-1256-01 Figure 14-45

Label, CPU

Figure 14-42 9903-0538-01

Label, DHHS Radiation Compliance, 1-7/8-in x 5/8-in, Domestic systems only

Figure 14-44 4100-0757-01

Label, Footswitch, Water-resistant

Figure 14-44 4100-1399-01

Label, Frame OEM Upright, Dark Grey

Figure 14-44 4100-0296

Label, Freeze Frame,4000B, Footswitch

Figure 14-45 4100-0968-01

Label, Ground and AC Input

Figure 14-42 4100-1431-01

Label, MISEM Connector, Remote

Figure 14-41 4100-1260-01

Label, Monitor Latch Warning

Notes/Reference

4730-0036-02





Part Description

Figure 14-45 4100-0958-01

Label, OEM Baseplate

Figure 14-7 4100-1548-01 Figure 14-10 Figure 14-45

Label, PCB Slot ID, 8.5

Figure 14-10 4100-0961-02 Figure 14-45

Label, PIM

Figure 14-42 4100-0960-01

Label, Power Input, Monitor

Figure 14-44 4100-1238-01

Label, Right Side Cover

Figure 14-43 4100-0959-01

Label, SBY-ON, System

Figure 14-41 4100-0966-02

Label, System ID

Figure 14-45 4100-0971-01

Label, System Warning

Figure 14-44 4100-1560-01

Label, System, Year 2000 Compliance

Figure 14-44 4100-0297

Label, VCR, 4000B, Footswitch

Figure 14-41 4100-1393-01

Label, Warning, High Voltage

Figure 14-43 4100-1568-01

Label, Warning, Monitor Lock

Figure 14-10 4100-1387-01 Figure 14-45

Label, Warning, Power Cord

Figure 14-32 1065-4264-02

Latch, Lock Bar

Figure 14-26 2405-0124-01

LED, Green, T1, 4MCD, Clear, PCB

Figure 14-26 2950-1161-01

Lens, LED, 3MM, Green, Low Profile

Figure 14-32 1065-4263-01

Lock Bar, Control Panel


Microphone Cable

Notes/Reference Located inside of front cover, outside of rear cover

4730-0036-02





Part Description

Figure 14-28 2100-1403-01

Microphone Cartridge, Cond., Electret

Figure 14-28 3500-2631-02

Microphone Module Assy

Figure 14-26 2100-1589-03

Monitor, 15-in, Color, Open Chassis, (FIMI)

Figure 14-26 2100-1346-09

Monitor, 15-in, Color, Open Chassis, (Microvitek)

Figure 11-39 Table 11-34 Table 11-35

Monitor Internal Cabling

Figure 14-29 1544-0012

Nut, 1/4-20, Keps, St, Zn

Figure 14-19 1539-0003

Nut, 4-40, Keps, St, Zn

Figure 14-3 1541-0002 Figure 14-8 Figure 14-11 Figure 14-15 Figure 14-16 Figure 14-17 Figure 14-18 Figure 14-19


Figure 14-24 1543-0002 Figure 14-29 Figure 14-36


Figure 14-12 1065-5096-01

Nut Plate, Caster, Rear, Swivel

Notes/Reference

4730-0036-02





Part Description

Notes/Reference

Figure 14-24 2601-0071-01

OEM Power Transformer, 350VA, 1 Pri/ 2 Sec, Shielded

Figure 14-39 3500-1856-03

OEM Remote Tray Assy

Figure 14-8

1065-2386-01

OEM Strap, Universal

See Figure 10-3 for strap details

Not shown

4100-1552-01

Overlay, Upper UIF

English

Not shown

4100-1553-01

Overlay, Upper UIF

French

Not shown

4100-1554-01

Overlay, Upper UIF

German

Not shown

4100-1555-01

Overlay, Upper UIF

Italian

Not shown

4100-1556-01

Overlay, Upper UIF

Danish, Norwegian, Swedish, Finnish

Figure 14-2

1065-4638-01

Pad, Foot Rest, Dark Gray

Figure 14-2 Figure 14-8

1065-2254-04

Panel, IIM Access


Panel, Mounting, Disk Drive Module

Figure 14-9

1065-4945-01

Panel, Rear, Dark Gray


1065-5222-01

Panel, Side, Left, Gen Imaging, Dark Gray

4730-0036-02

Table 14-1



Located On

Part Number

Part Description


1065-5224-01

Panel, Side, Left, CV Systems, Dark Gray


1065-5221-02

Panel, Side, Right, Gen Imaging, Dark Gray


1065-5223-02

Panel, Side, Right, CV Systems, Dark Gray

Figure 14-21 7500-1328-xx

PCB Assy, Adv. Digital/Audio/ Physio and Translator (ADAPTR), A9B

Figure 14-21 7500-1413-xx

PCB Assy, Adv. IF Output Module (AIFOM 2), A13B

Figure 14-21 3500-1577-xx Figure 14-22

PCB Assy, AC Input Module (ACIM), PS4/PS5, 100-120 V/50 Hz

3500-1578-xx

PCB Assy, AC Input Module (ACIM), PS4/PS5, 100-120 V/60 Hz

3500-1579-xx

PCB Assy, AC Input Module (ACIM), PS4/PS5, 230 V/50 Hz

3500-1580-xx

PCB Assy, AC Input Module (ACIM), PS4/PS5, 230 V/60 Hz

Figure 14-14 7500-0977-xx

PCB Assy, Analog Interface Module (AIM), A5F

Figure 11-5

PCB Assy, Centerplane Connectors

Figure 11-1


7500-1006-04

PCB Assy, Centerplane, Front

Notes/Reference

Table 13-37 See Figure 11-4

Table 13-11

Table 13-38

4730-0036-02

Table 14-1




Located On

Part Number

Part Description

Notes/Reference

Figure 11-1

7500-1008-04

PCB Assy, Centerplane, Rear

Table 13-38

Figure 14-14 7500-0974-xx

PCB Assy, Channel Boards (CB0-CB7), Table 13-13 A7F-A14F

Figure 14-16 7500-1020-xx Figure 14-17

PCB Assy, Disk Drive Module, with Physio

Figure 14-15 7500-0843-xx Figure 14-18

PCB Assy, Disk Drive Module, without ECG

Figure 14-14 7500-0762-xx

PCB Assy, Doppler Acquisition (DOPACQ), A6F

Figure 14-14 7500-1529-xx

PCB Assy, Front End Controller (FEC), A4F

Figure 14-21 3500-1867-xx

PCB Assy, Image Memory (IMEM), A8B, 32 Mb

16 Mb x 2 SIMMS

Figure 14-21 3500-2757-xx

PCB Assy, Image Memory (IMEM), A8B, 64 Mb

16 Mb x 4 SIMMS

Figure 14-8 7500-1291-xx Figure 14-21

PCB Assy, Internal Interface Module (IIM), A1B

Figure 14-26 7500-1667-03

PCB Assy, Monitor Control (use with FIMI)

Figure 14-26 7500-1312-02

PCB Assy, Monitor Control (use with Microvitek)

Figure 14-27 7500-1313-03

PCB Assy, Monitor Light Bar

4730-0036-02





Part Description

Notes/Reference

Figure 14-21 7500-1398-xx

PCB Assy, Peripheral Interface Module (PIM), A2B

Figure 14-21 7500-1408-xx

PCB Assy, Pixel Conversion Module (PCM), A3B

Figure 14-21 7500-0714-xx

PCB Assy, Pixel Space Processor 2 (PSP2), A4B

Figure 14-21 7500-0713-xx

PCB Assy, Pixel Space Processor 1(PSP1), A5B

Figure 14-14 7500-1342-xx

PCB Assy, Power Supply Module (PSM), PS2

Figure 14-21 7500-0768-xx

PCB Assy, Sample Space Processor (SSP2), A11B

Figure 14-5 7500-0976-xx Figure 14-14

PCB Assy, Scanhead Select MUX (S/HSEL)

Figure 14-21 3500-2677-xx

PCB Assy, System CPU (SYSCPU), A6B, 32 Mb

Not shown

PCB Assy, User Interface Module (UIM) (Attaching parts) 1514-0083, screw 1560-0065, washer

7500-1320-xx

Figure 14-40 2950-0851-01

Pin, Hitch, 0.07 Wire, 0.38/0.5 Shaft, St,

Figure 14-36 1065-2576-02

Plate, Cable Clamp, Left

Figure 14-36 1065-2577-02

Plate, Cable Clamp, Right

Figure 14-20 1065-2951-02

Plate, Cover, OD Drive, DDEA

4730-0036-02





Part Description

Figure 14-29 1065-2372-04

Plate, Monitor Swivel

Figure 14-23 1065-2498-02

Plate, Nut, Transformer

Figure 14-24 1065-2533-02

Plate, Stud, Sinewave Transformer

Figure 14-8

Plate, Universal OEM

1065-2385-04

Notes/Reference

Figure 14-25 2950-0587-01

Plug, Hole, 0.562D, 1/8 Max, Pnl, Wht, Nylon, without VCR

Figure 14-15 2950-1041-01 Figure 14-18

Plug, Hole, ECG, Painted

Figure 14-15 2950-1040-01 Figure 14-18

Plug, Hole, Physio, DDEA, Painted

Figure 14-22 2208-0143-01

Plug Lock, Inside, Detach Power Cord

Figure 14-22 2208-0144-01

Plug Lock, Outside, Detach Power Cord For 3402-0026-01

Figure 14-8 2601-0052-05 Figure 14-23

Power Transformer Assy, Ferro-Res, 1200 VA, w/Shld

Figure 14-22 3100-2148-01

Receptacle, IEC, Male, 10A, Pnl/PCB

Figure 14-29 1065-2438-01

Ring, Clamping, Monitor Swivel

Figure 14-40 1065-2904-05

Rod, Detent, Tray

Figure 14-4

Rotor, Cable Manager

1065-2899-01

Figure 14-26 1630-0090-01

Screw, M4 x 6, Pnh, Pd, Int Sems, Ss, Bo

Figure 14-31 1630-0058-01

Screw, M4 x 10, Pnh, Pd, Sems S/R Lk, St, Zn

For 3100-2148-01 50-60 Hz

4730-0036-02





Part Description

Figure 14-25 1630-0098-01 Figure 14-31

Screw, M5 x 12, Pnh, Pd, Int Sems, St, Bo

Figure 14-12 1519-0034

Screw, 1/4-20 x 3/4, Pnh, Pd, St, Zn

Not shown

Screw, 4-40 x 1/4, Pnh, Sems, Pd, Ss

1514-0083

Figure 14-37 1530-0027-01

Screw, 4-40 x 1/2, Flh, Pd, 82D, St, Wht

Figure 14-19 1514-0060 Figure 14-20

Screw, 4-40 x 3/8, Pnh, Sem,Pd,St,Zn

Figure 14-14 1563-0258-01

Screw, 6-32 x 0.88, Captive, HD, SS, Tn

Figure 14-39 1516-0005 Figure 14-40

Screw, 6-32 x 3/8, Pnh, Pd, St, Zn

Figure 14-11 1516-0074 Figure 14-24 Figure 14-27 Figure 14-39 Figure 14-40

Screw, 6-32 x 3/8, Pnh, Sem, Pd, St, Zn

Figure 14-20 1530-0269-01

Screw, 6-32 x 1/2, Flh, Pd, 100D, Ss, Fogwhite

Notes/Reference

Attaches User Interface PCB Assy

4730-0036-02





Part Description

Figure 14-7 1516-0113 Figure 14-9 Figure 14-15 Figure 14-16 Figure 14-17 Figure 14-18 Figure 14-27 Figure 14-39


Figure 14-19 1516-0076

Screw, 6-32 x 5/16, Pnh, Int Sems, Pd, Ss

Figure 14-26 1530-0327-01

Screw, 6-32 x 3/4, Pnh, Pd, Nylock, St, Zn

Figure 14-40 1516-0119

Screw, 6-32 x 1-1/4, Pnh,Sem,Pd,St,Zn

Figure 14-39 1517-0014


Figure 14-39 1517-0061

Screw, 8-32 x 1/4, Pnh, Sems, Pd, St, Zn

Figure 14-12 1530-0360-01

Screw, 8-32 x 3/8, Set, Hd, Flat, Pt, Zn

Figure 14-39 1530-0046-02


Figure 14-2 1518-0051 Figure 14-35


Figure 14-12 1530-0157-01

Screw, 10-32 x 5/8, Cap, Hd, Nylok, Zn

Notes/Reference

Requires a 5/64 allen wrench ”

4730-0036-02





Part Description

Figure 14-5 1518-0043 Figure 14-8 Figure 14-10 Figure 14-39


Figure 14-29 1530-0297-01

Screw, 10-32 x 1, Pnh, Pd, Sems, St, Zn

Figure 14-36 1530-0156-01

Screw, 10-32 x 1, Flh, Pd, Fog White

Figure 14-15 3100-1387-01 Figure 14-16 Figure 14-17 Figure 14-18 Figure 14-37

Screwlock, 0.18-25H, 0.31L Stud, Pair

Figure 14-19 1065-4682-01

Seal, Support, MO Drive, DDEA

Figure 14-6

3500-1877-01

Shield Assy, Card Cage, Front Left

Figure 14-6

3500-1876-01

Shield Assy, Card Cage, Front Right

Figure 14-9

3500-1878-04

Shield Assy, Card Cage, Rear

Notes/Reference

Figure 14-19 3600-0242-01

Shield, Strip, Finger, 1.13x4.0 L

Figure 14-33 3500-1563-01

Slidepot Assy

Figure 14-39 2950-1066-01

Slides, No Lock, 3-Section, 17-in Travel, Come in pairs Left/Right

Figure 14-16 1064-0130-02 Figure 14-17

Spacer, Connector, Plastic

Not shown

Spacer, Motherboard Assy

1065-2986-02

4730-0036-02





Part Description

Figure 14-26 2100-1235-01

Speaker, 3.5-in, 8 Ohm, SHLD, 8 W, Ex, Rng

Figure 14-26 4600-0271-01

Standoff, 6-32,1.0L,1/4Hex, F/F, Nylon

Figure 14-26 2208-0147-01 Figure 14-31

Standoff, Wire, 3/16, Push-in, Twist, Ny

Figure 14-4

Support, Cable Manager

1065-2901-01

Figure 14-31 1065-2683-01

Support, VCR

Figure 14-34 3300-0307-01

Switch, Rocker, Spst, 1A, 28V, Blk/Blk, Pnl

Not shown

Tape, Velcro, 1-in W, Blk, Type 400, 3/4-in L

2604-0119-01

Figure 14-23 2950-0512-01

Terminal Boot, Cap Insulator, Rubber

Figure 14-33 2100-1656-01

Trackball, 500C/Rev, Dark Gray, Sealed

Figure 8-1

2100-1657-01

Trackball Adjustment tool

Figure 14-7

1065-2953-01

Tray, Enclosure

Notes/Reference

Secures ferrite core on 3500-2614-xx cable assy to monitor

Figure 14-39 1065-2907-04

Tray, OEM Remote

Figure 14-33 3500-2955-xx

User Interface Assy, Upper (UCP)

English

Figure 14-33 3500-2957-xx


French

Figure 14-33 3500-2959-xx


German

Figure 14-33 3500-2961-xx


Italian

Figure 14-33 3500-2954-xx

User Interface Assy, Lower (LCP)

English

4730-0036-02





Part Description

Notes/Reference

Figure 14-33 3500-2956-xx


French

Figure 14-33 3500-2958-xx


German

Figure 14-33 3500-2960-xx


Italian

Figure 14-33 3500-2962-xx


Danish

Figure 14-33 3500-2963-xx


Norwegian

Figure 14-33 3500-2964-xx


Swedish, Finnish

Figure 14-28 9901-0035

Velcro, Hook & Loop, Wht.1" Wd

Figure 14-25 3500-3040-03

Video Monitor Assy, HDI 15-in Color, (FIMI)

Figure 14-25 3500-2532-13

Video Monitor Assy, HDI 15-in Color, (Microvitek)

Figure 14-25 3500-2532-14

Video Monitor Assy, HDI 15-in Color, (Microvitek)

Figure 14-38 3500-1857-01

Video Switch Assy

Figure 14-26 1560-0050

Washer, Flat, 0.17ID, 0.438OD, 0.032T, St, Zn

Figure 14-26 1565-0071-01

Washer, Flat, 0.26ID, 0.5OD, 0.032T, Nylon

Figure 14-19 1560-0065

Washer, Flat, #4, 0.122ID, 0.28OD, 0.03T,

Not shown

Washer, FIat, #6, 0.156ID, 0.38OD, 0.015T, SS

1560-0031

Alternate

Fits on tray

4730-0036-02





Part Description

Notes/Reference

Figure 14-39 1560-0046

Washer, Flat, #6, 0.156ID, 0.375OD, 0.049T, St, Zn

Figure 14-27 1560-0061

Washer, Flat, #6, 0.312OD, 0.32T, St, Zn

Figure 14-40 1560-0073

Washer, Flat, #8, 0.185ID, 0.437OD, 0.062T, Ny

Figure 14-5 1560-0051 Figure 14-8 Figure 14-10 Figure 14-25 Figure 14-29

Washer, Flat, #10, .203Id, .500D, .04T, St, Zn

Figure 14-12 1560-0020

Washer, Flat, 1/4, .6250D, .065T, St, Zn

Figure 14-12 1561-0001

Washer, Internal Lock, 1/4, .4780D, .025T

Figure 14-39 1561-0015

Washer, Internal Lock, #10, 0.38OD x 0.025T, St, Zn

Figure 14-26 1065-4502-01

Washer, Isolation, Speaker, Monitor

Figure 14-26 1562-0016

Washer, Shoulder, #6, 0.14ID, 0.17SD, 0.29OD, Ny

Figure 14-12 2950-0857-01 Figure 14-13

Wheel, Axle Assy

2 ea. side

Wheel, Caster Assy

2 ea. caster

Figure 14-3

3500-2739-01

Wrist Support, Self-Adhesive, Dark Gray

4730-0036-02


Table 14-2


HDI 3500 System Accessories Parts List (Not Illustrated)

Part Number

Part Description

Notes/Reference

8500-9116-01

Kit, Accessory Tool

Hitachi system

9905-0396-01

•

Screwdriver, #1 Phillips, 3-1/8-in Shaft

Hitachi system

9905-0397-01

•

Screwdriver, 7/64 Ball Hex, 6-in Shaft

Hitachi system

9903-0517-01

•

Bag, Zipper, Ring Binder, 9.5-in x 6-in

Hitachi system

2100-1419-01

Kit, Cleaning, Optical Drive, Fujitsu

8000-1682-01

Kit, Dependency 1512 MO Drive with Bracket

8000-1969-01

Kit, Dependency, 1646 MO Drive with Bracket

8000-2001-01

Kit, Dependency, IBM, Adapter, Clamp, Ops

8000-1900-01

Kit, Dependency, IBM Assembly and Clamp

8000-1462-01

Kit, New Dependency, Monitor Cover

8000-1366-01

Kit, Power Cord Cable Clamp

8000-1668-01

Kit, UIF Cable Clamps

2100-0792-01

Optical Disk, 3.5-in 128 MB (blank)

Figure 14-19

2100-1410-01


Figure 14-19

2100-1653-01


Figure 14-19

2301-0700-01

Paint, Touch Up, Fog White, 1 oz Bottle

2301-0701-01

Paint, Touch Up, Fog White, 16 oz Aerosol

”

4730-0036-02


Table 14-3


Peripheral Part Numbers Peripherals Description

Location

(See Table 11-34 and Figure 11-41 for signal cables, Table 11-35 and Figure 11-42 for power cables)

Part Numbers

OEM Set Ups

Color Printer, Mitsubishi, CP700, 120 V

3500-3071-011 2100-1327-01

Table 5-8


3500-3072-011 2100-1328-01


3500-3063-011 2100-1535-01


3500-3064-011 2100-1536-01

Color Printer, Sony UP5600-60Hz, 155 Vac, NTSC

2100-0847-01

Color Printer, Sony UP5600-50 Hz, 155 Vac, PAL

3500-1694-01

Color Video Printers OEM Bay Figure 14-1

Table 5-10

Table 5-7

Black & White Video Printers OEM Bay Figure 14-1

B&W Printer, Mitsubishi P91 W, 120 V/60 Hz, NTSC, 230 V/50 Hz, PAL

2100-1680-01

Table 5-12

B&W Printer, Sony UP890, 120/230 V, NTSC/ PAL (use either power cable)

2100-0862-01

Table 5-14

B&W Printer, Sony UP910CE, Large Format, 240 V, 50 Hz, PAL

2100-0759-01

Refer to OEM Manual

4730-0036-02


Table 14-3


Peripheral Part Numbers (Continued) Peripherals Description

Location


Part Numbers

OEM Set Ups

B&W Printer, Sony UP910MD, 120 V, NTSC2

2100-0701-01

Refer to OEM Manual

VCR Assy, SVHS, NTSC, HIFI, 120 V, RS-232

3500-1662-02

Refer to OEM

VCR Assy, SVHS, PAL, HIFI, 240 V, RS-232

3500-1663-01

Manual

AG-MD830P, VCR, NTSC, HiFi,120 Vac

2100-0785-02

AG-MD830P, VCR, PAL, HiFi, 240 Vac

2100-0829-01

VCR, Sony SVO-9500MD

3500-1875-01

VCR Figure 14-31

Network Printers External

Printer, Codonics NP1660MD, NetLink, North America

2100-1566-01

Printer, Codonics NP1660MD, NetLink, International

2100-1567-01

Table 5-11

Network Image Acquisition OEM Bay Figure 14-1

Access Acquisition Module, 115 V, NTSC, (Internal Installation)

2100-7071-01

Refer to AAM Service Manual

Access Acquisition Module, 115 V, NTSC, (External Installation)

2100-7071-01

4730-7070-01b. pdf

Aspect MIC Camera, 120 V, NTSC, English

3500-1664-01

Table 5-15

Cameras External

4730-0036-02

Table 14-3



Peripheral Part Numbers (Continued) Peripherals Description

Location


Part Numbers

OEM Set Ups

Aspect MIC Camera, 240 V, PAL, English

3500-1665-01

Table 5-15

Aspect MIC Camera, 240 V, PAL, French

3500-1671-01

Aspect MIC Camera, 240 V, PAL, German

3500-1667-01

Integrated Stress Echo Module OEM Bay Figure 14-1

ISEM, 3.5-in/64 Mb, NTSC

2100-1434-02

Refer to ISEM Service Manual

ISEM, 5.25-in/64 Mb, NTSC

2100-1435-02

4730-7017-04

ISEM, 3.5-in/32 Mb, PAL

2100-1370-03

ISEM, 5.25-in/32 Mb, PAL

2100-1369-02

LED Pg Printer, Okidata OL400e, 120 V, Ext.

2100-0866-01

Page Printers External

1. 3500-XXXX is the 2100-XXXX printer with feet.

Refer to OEM manual

4730-0036-02

15


Page 422 Scanheads: Scanheads

Scanheads

Scanheads

Table 15-1 contains 15-1 contains the scanhead name that appears on the display when selected, the label on the scanhead, the scanhead frequency, frequency, the Doppler frequency, frequency, and the 2D Penetration at the default TSI setting. Table 15-2 contains 15-2 contains scanhead part numbers and compatibility information. Table 15-3 lists 15-3 lists the biopsy guides guid es available available for each scanhead. Table 15-4 contains 15-4 contains a summary of clinical options and TSI settings. Table 15-5 is 15-5 is a table of PW maximum measurable velocity (MMV) for each scanhead. Table 1515-6 6 is a table of CW maximum measurable velocity (MMV) for each scanhead.

Table 15-1

Scanhead Information

Scan Sc anhe head ad Name Name Sc Scan anhe head ad Labe Labell

Operating Frequency

Doppler Frequency

Penetration (2D min)

L7-4 38 mm

Linear Array L7-4

7.0 - 4.0 MHz

4.0 MHz

6.3 cm

LI9-5

Linear Array LI9-5

9.0 - 5.0 MHz

5.0 MHz

5.0 cm

LAP L9-5

Linear Array LI9-5

9.0 - 5.0 MHz

6.0 MHz

5. 0 c m

L10-5 38 mm

Linear Array L10-5

10.0 - 5.0 MHz

6.0 MHz

4.8 cm

L12-5 38 mm

Linear Array L12-5

12.0 - 5.0 MHz

6.0 MHz

4.8 cm

L12-5 50 mm

Linear Array L12-5

12.0 - 5.0 MHz

6.0 MHz

4.8 cm

C3.5 76 mm

Curved Array C3.5

3.5 MHz

3.0 MHz

10 . 0 c m

C4-2 40 mm

Curved Array C4-2

4.0 - 2.0 MHz

2.5 MHz

11.5 cm

C5-2 40 mm

Curved Array C5-2

5.0 - 2.0 MHz

2.5 MHz

11 . 5 c m

4730-0036-02

Table 15-1



Scanhead Information (Continued)

Scan Sc anhe head ad Name Name Sc Scan anhe head ad Labe Labell

Operating Frequency

Doppler Frequency

Penetration (2D min)

C5 IVT 11 mm

Curved Array C5 IVT

5.0 MHz

4.0 MHz

5.5 cm

C7-4 40 mm

Curved Array C7-4

7.0 - 4.0 MHz

4.0 MHz

6. 3 c m

C8-4v 11 mm

Curved Array C8-4v

8.0 - 4.0 MHz

5.0 MHz

5.5 cm

C8-5

Curved Array C8-5

8.0 - 5.0 MHz

5.0 MHz

5. 2 c m

C9-5 ICT 8 mm

Curved Array C9-5

9.0 - 5.0 MHz

5.0 MHz

5.2 cm

CL10-5

Compact Linear CL 10-5

10.0 - 5.0 MHz

6.0 MHz

3. 2 c m

CT8-4 40 mm

Curved Array CT8-4

8.0 - 4.0 MHz

6.0 MHz

5.8 cm

P3-2 20 mm

Phased Array P3-2

3.0 - 2.0 MHz

2.0 MHz

12 cm

P4-2 20 mm

Phased Array P4-2

4.0 - 2.0 MHz

2.0 MHz

12 cm

P5-3 16 mm

Phased Array P5-3

5.0 - 3.0 MHz

3.0 MHz

9. 5 c m

P7-4 8 mm

Phased Array P7-4

7.0 - 4.0 MHz

4.0 MHz

6. 0 c m

MPT7-4

Phased Array MPT7-4

7.0 - 4.0 MHz

4.0 MHz

6.0 cm

BPT9-5

Phased Array BPT9-5

9.0 - 5.0 MHz

6.0 MHz

4.5 cm

TCD Static

D2 TC

2.0 MHz

2.0 MHz

D2 Static

D2 CW

2.0 MHz

2.0 MHz

D5 Static

D5 CW

5.0 MHz

5.0 MHz

D10 Static

D10 CW

10.0 MHz

10.0 MHz

4730-0036-02

Table 15-2



Scanhead Matrix Dash Number

Scanhead Type Part Scanhead Name Number

Bkwd

4

Biopsy Hardware No. Elem. Guide3 Notes

Comp.

04

64

N

150.23

02

64

Y

150.23

2

EM 1 Current Comp. C

S/W

PHASED ARRAY P3-2 20 mm

4000-0287 04

03/02

P4-2 20 mm

4000-0660 02 02

P5-3 16 mm

4000-0316 05

04/03/ 02

0 5 /0 4 6 4

Y

150.23

P7-4 8 mm

4000-0322 03

02/01

0 3 /0 2 6 4

Y

150.23

MPT7-4

4000-0317 16

09/08/ 07/04/ 03

64

N

150.23

BPT9-5

4000-0420 01 01

-

01

2x64

N

150.23

05

128

Y

150.23

-

-

LINEAR ARRAY L7-4

4000-0318 05

04/03/ 02/01

LAP L9-5

4000-0658 04

-

-

128

N

150.23

LI9-5

4000-0408 01

-

-

128

N

150.23

L10-5 38 mm

4000-0263 06

05/03/ 02

-

192

Y

150.23

L10-5 38 mm

4000-0333 02

01

02

192

Y

150.23

L12-5 38 mm

4000-0396 01

01

192

Y

150.23

-

4730-0036-02

Table 15-2



Scanhead Matrix (Continued) Dash Number


Bkwd


4

256

Y

150.23

05/04 128

N

150.23

128

Y

150.23

128

Y

150.23

128

Y

150.23

2

EM 1 Current Comp. C -

01

S/W

Comp.

L12-5 50 mm

4000-0762 01

CL10-5

4000-0315 05

04/03/ 02/01

C3.5 76R

4000-0256 07

06/05/ 04

C4-2 40R

4000-0320 05

03/02

C5-2 40R

4000-0574 03

02/01

C5 IVT

4000-0260 05

04

05

114

Y

150.23

C7-4 40R

4000-0301 06

05/03/ 03 02

128

Y

150.23

C8-4v 11 mm

4000-0409 02

128

Y

150.23

CT8-4 40 mm

4000-0390 03

128

N

150.23

C8~5 14 R

4000-0800

Y

151.09

C9-5 ICT

4000-0280 16

1-3, 08, 12/11/ 128 10-15 10/09

Y

150.23

D2 TC

4000-0310 02

01

D2 CW

4000-0307 03

CURVED ARRAY

-

03 -

02

02

-

01

STATIC CW -

02

2

N

150.23

03

2

N

150.23

4730-0036-02


Table 15-2


Scanhead Matrix (Continued) Dash Number


Bkwd

2

EM 1 Current Comp. C


4

S/W

Comp.

D5 CW

4000-0308 02

-

02

2

N

150.23

D10 CW

4000-0309 02

-

02

2

N

150.23

1. The Bkwd Comp. column lists dash numbers that are backward compatible with the listed scanhead. 2. The EMC column lists dash numbers of scanheads that may be ordered worldwide (must use EMC scanheads for Europe). Non-EMC scanheads may be ordered for domestic U.S. and other countries. 3. Indicates biopsy guide availability. Check paragraph for part numbers. 4. The S/W Comp. column lists the minimum software build level required for use of the listed scanhead. “

“

”

”

“

Table 15-3

”

Scanhead Biopsy Guides Dash No.

Bkwd.

Fwd. 1 Comp. Comp.

Hardware Notes

S/W2

Biopsy Guide

Part No.

Comp.

Biopsy Guide Kit, P4-2

8000-1622 01

150.23


8000-1526 01

150.23


8000-1527 01

150.23

Biopsy Guide Bracket L7-4, 38 mm, 5 MHz

1065-1910 02

150.23

4730-0036-02

Table 15-3



Scanhead Biopsy Guides (Continued) Dash No.

Bkwd.

Fwd. 1 Comp. Comp.

Hardware Notes

S/W2

Biopsy Guide

Part No.

Biopsy Guide Bracket L10-5, 38 mm, 7.5 MHz

1065-1908 02

150.23

Biopsy Guide Kit L12-5, 38 mm

2950-1211 01

150.23

Biopsy Guide Kit L12-5, 50 mm

8000-1619 02

150.23

Biopsy Guide 1065-1907 02 Bracket C3.5, 76R, 3.5 MHz

150.23

Biopsy Guide 1065-1909 02 Bracket C4-2 40R/ C5-2 40R/C7-4

150.23

Biopsy Guide Bracket, C9-5 ICT

1065-1811 02

Biopsy Guide Bracket, C5 IVT

8075-0580 02

Universal Biopsy Guide, C9-5 ICT

1065-2608 04

No longer sold. Supplies still available.

Comp.

150.23

150.23 03, 02, 01

150.23

4730-0036-02


Table 15-3


Scanhead Biopsy Guides (Continued) Dash No.

Biopsy Guide

Part No.

Biopsy Guide Kit, C8-4v

8000-1304 01 1065-2731 01

Biopsy Guide Kit, C8-5

1065-4585 01

Bkwd.

Fwd. 1 Comp. Comp.

Hardware Notes

S/W2 Comp. 150.23 150.23

1. The Bkwd Comp. column lists dash numbers that are backward compatible with the listed scanhead. 2. The S/W Comp. column lists the minimum software build level required for use of the listed scanhead. “ “

Table 15-4 Type

”

”

Scanhead Clinical Options and TSI Clinical Options

2D Opt.

Flow Opt. Tissue Specific Imaging (TSI)

Linear array L7-4 40 mm

Small Parts

X

X

Thyroid, Testicle, Breast, Superficial

Cerebrovascular

X

Carotid, Vertebral

Peripheral Vasc

X

Arterial, Venous, Graft

Musculoskeletal

X

Shoulder, Knee

Pediatric

X

X

Ped Hip

Advanced Breast

X

X

General

X

General

X


X

Carotid, Vertebral

Generic L10-5 40 mm

Small Parts Cerebrovascular

X

4730-0036-02

Table 15-4 Type



Scanhead Clinical Options and TSI (Continued) Clinical Options

2D Opt.

Peripheral Vasc

X


Musculoskeletal

X

Shoulder, Knee, Elbow/Wrist, Hand/ Foot, Superficial

X

Neo Abd, Neo Hip, Neo Renal

X

General

Pediatric

X

Advanced Breast L12-5 38 mm

L12-5 50 mm


Generic

X

X

General

Small Parts

X

X

Thyroid, Testicle, Breast (no 2D Opt), Superficial

Cerebrovascular

X

X

Carotid, Vertebral

Peripheral Vasc

X

X


Musculoskeletal

X

X

Shoulder, Knee,Elbow/Wrist, Hand/ Foot, Superficial

Pediatric

X

X


Advanced Breast

X

X

General

Generic

X

X

General

Small Parts

X

X


Cerebrovascular

X

X

Carotid, Vertebral

Peripheral Vasc

X

X


Musculoskeletal

X

X

Shoulder, Knee, Elbow/Wrist, Hand/ Foot, Superficial

4730-0036-02


Table 15-4 Type

CL10-5



2D Opt.


Pediatric

X

X


Advanced Breast

X

X

General

Generic

X

X

General

Small Parts

X

Superficial

Cerebrovascular

X

Carotid

Peripheral Vasc

X

Graft

Musculoskeletal

X

Shoulder, Knee Elbow/Wrist, Hand/ Foot, Superficial

Pediatric

X

Neo Abd, Neo Renal

Neurosurgery

X

Crani, AVM, Spine

Vascular

X

Vascular

Adult Card

Superficial

Generic

General

Curved Array C3.5 76 mm

C4-2

OB

X

General, Fetal Echo

Gyn/Fertility

X

Pelvic

Generic

X

General

Abdomen

X

X

General, Renal, Aorta, Transplant

OB

X

X

General, Fetal Echo

Gyn/Fertility

X

X

Pelvic

4730-0036-02


Table 15-4 Type

C5-2

C7-4

C8-4v



2D Opt.


General Imaging/CSI

X

X

2D Harmonic, Power Harmonic

Abdomen with THI

X

X


OB with THI

X

X

General, Fetal Echo

Gyn/Fertility with THI

X

X

Pelvic

Generic

X

X

General

Abdomen

X

X


OB

X

X

General, Fetal Echo

Gyn/Fertility

X

X

Pelvic

General Imaging/CSI

X

X

2D Harmonic, Power Harmonic

Abdomen with THI

X

X


OB with THI

X

X

General, Fetal Echo

Gyn/Fertility with THI

X

X

Pelvic

Generic

X

X

General

Abdomen

X

X


OB

X

X

General, Fetal Echo

Gyn/Fertility

X

X

Pelvic

Generic

X

X

General

OB

X

X

General, Fetal Echo

Gyn/Fertility

X

X

Pelvic

Generic

X

X

General

4730-0036-02


Table 15-4


Scanhead Clinical Options and TSI (Continued) 2D Opt.


Type

Clinical Options

C8-5

Small Parts

X

Superficial

Cerebrovascular

X

Carotid

Peripheral Vasc

X


Pediatric

X

Neo Abd, Neo Renal, Neo Hip, Neo Pelvic, Cephalic

Neurosurgery

X

Crani, AVM, Spine

OB

X

General

Pediatric Card Generic C9-5

C5 IVT

Neonatal X

X

General

Prostate

X

Prostate

OB

X

General, Fetal Echo

Gyn/Fertility

X

Pelvic

Generic

X

General

OB

General, Fetal Echo

Gyn/Fertility

Fertility, Pelvic

Generic

X

X

General

Abdomen

X

X

General, Aorta

OB

X

X

General, Fetal Echo

Gyn/Fertility

X

X

Pelvic

Phased Array P3-2

4730-0036-02


Table 15-4 Type



2D Opt.

TCD

Flow Opt. Tissue Specific Imaging (TSI) X

Adult Card

General, Difficult

Pediatric Card

General

Card CSI

2D Harmonic, Power Harmonic X

Adult Card with THI X

General

Abdomen

X

X

General, Aorta

OB

X

X

General, Fetal Echo

Gyn/Fertility

X

X

Pelvic

X

TCD

TCD Adult Card

X

General

Pediatric Card Card CSI

General X

2D Harmonic, Power Harmonic (no 2D Opt) X

P5-3

Power Harmonic 2 General

Generic P4-2

TCD

Power Harmonic 2

Adult Card with THI

X

General

Generic

X

X

General

Abdomen

X

X

General

OB

X

X

General, Fetal Echo

4730-0036-02


Table 15-4 Type


Scanhead Clinical Options and TSI (Continued) Clinical Options Gyn/Fertility

2D Opt. X

Pediatric

X

Pelvic

X

Ped Abd

Adult Card

General, Difficult

Pediatric Card

General

Generic P7-4


X

General

Pediatric

X

X

Ped Abd, Cephalic, Ped Renal

OB

X

X

Fetal Echo

Pediatric Card

General, Neonatal

Cerebrovascular

X

Adult Card

Carotid General

Neurosurgery

X

X

AVM, Crani

Generic

X

X

General

Abdominal Surgery

X

X

General

Generic

X

X

General

Abdominal Surgery

X

X

Superficial

Generic

X

X

General

Abdominal Surgery

X

X

General, Superficial

Generic

X

X

General

Surgical CT8-4 Li 9-5 Lap L9-5 Transesophageal

4730-0036-02

Table 15-4



Scanhead Clinical Options and TSI (Continued) 2D Opt.


Type

Clinical Options

MPT 7-4

TEE

X

X

TEE

Generic

X

X

General

BPT 9-5

TEE Generic

Pediatric, Neonatal X

X

General

Static Probes D2 TC D5 CW

D10 CW D2 CW

TCD

TCD

Generic

General

Cerebrovascular

•

Carotid, Vertebral

Peripheral Vascular

•

Arterial, Venous

Generic

•

General

Peripheral Vascular

•

Arterial, Venous

Generic

•

General

Adult Card

•

General

Pediatric Card

•

General

Generic

•

General

4730-0036-02

Table 15-5

Scanhead



PW Doppler Maximum Measurable Velocities (MMV) Angle Correction Doppler Freq. (MHz) (degrees)

MMV (meters/sec)

BPT9-5

6.0

0

3.50

C3.5 76 mm

3.0

0

5.80

C4-2 40 mm

2.5

0

7.00

C5-2 40 mm

2.5

0

7.00

C5 IVT

4.0

0

4.40

C8-4v IVT

5.0

0

3.50

C8-5 14R

5.0

0

3.50

C7-4 40 mm

4.0

0

4.40

C9-5 ICT

6.0

0

3.50

CL10-5

6.0

0

2.90

CT8-4

4.0

0

4.40

D2 TCD

2.0

0

8.80

L7-4 38 mm

4.0

0

4.40

LI9-5 33 mm

6.0

0

2.90

L10-5 38 mm

6.0

0

2.90

L12-5 38 mm

6.0

0

2.90

MPT7-4

4.0

0

4.40

P3-2 20 mm

2.0

0

8.80

4730-0036-02

Table 15-5

Scanhead



PW Doppler Maximum Measurable Velocities (MMV) (Continued) Angle Correction Doppler Freq. (MHz) (degrees)

MMV (meters/sec)

P4-2 20 mm

2.0

0

8.80

P5-3 16 mm

3.0

0

5.80

P7-4 11 mm

4.0

0

4.40

Table 15-6 Scanhead

CW Doppler Maximum Measurable Velocities (MMV) Doppler Freq. (MHz)

Angle Correction (degrees)

MMV (meters/sec)

BPT9-5

4.0

0

8.0

D2 CW

2.0

0

16.0

D5 CW

5.0

0

6.40

D10 CW

10.0

0

3.20

MPT7-4

4.0

0

8.0

P3-2 20 mm

2.0

0

16.0

P4-2 20 mm

2.0

0

16.0

P5-3 16 mm

3.0

0

10.70

P7-4 11 mm

4.0

0

8.0

4730-0036-02

16


Page 438 Glossary: Acronyms and Abbreviations

Glossary

Acronyms and Abbreviations 4V2

Peak pressure gradient

A

Amperes

A1B

A1B-A13B identify card cage slot positions

AC

Alternating current

ACIM

AC Input Module (main power input panel)

A/D

Analog-to-digital conversion

ADAPTR

Advanced Digital, Audio, Physio, and Translator (module)

AIFOM

Advanced IF Output Module

AIM

Analog Interface Module

Amps

Amperes

AP&I

Acoustic Power and Intensity

APS

Analog Power Supply

AQ

Acquisition (bus)

AQ Bus

Acquisition Bus

4730-0036-02



Assy

Assembly

AT

Acceleration time; averaging time

B/W

Black and white

CB, Ch Bd

Channel Board

CAM

Combined Acquisition Mode

Cap

Capacitor

CFM

Cubic feet per minute

COMP IMG

Compound Imaging (Spatial compounding, SonoCT)

Conn

Connector

CPA

Color Power Angio

CPI

Control Panel Interface (module)

CPU

System CPU (system controller module)

CRE

Contrast Resolution Enhancement (freq. compounding)

CSI

Contrast Specific Imaging

D

Diameter

D/A

Digital-to-analog

DC

Direct current

DCE

Dynamic Contrast Enhancement (frame averaging)

DDEA

Disk Drive, ECG, and Audio (module)

DOPACQ

Doppler Acquisition (module)

4730-0036-02



DPS

Digital Power Supply

DRF

Dynamic Receive Focusing

DT

Deceleration time

ECG

Electrocardiograph

EDF

End diastolic velocity and frequency

ESP

Extended Signal Processing

FEC

Front End Controller (module)

FFT

Fast Fourier Transform

Fl

Flat

Flh

Flathead

FNDE

Fender washer

FOOTSW

Footswitch

F/W

Firmware

GB

Gigabyte

H

High

Hd

Hex drive

HD ZOOM

High Definition ZOOM (Ultrasound image enlargement )

Hosp

Hospital

HPRF

High Pulse Repetition Frequency

HR

Heart rate

4730-0036-02



HVAC

High voltage alternating current

HVDC

High voltage direct current

H/W

Hardware

Hz

Hertz

ID

Inside diameter (screws or hardware) or system identification number

IF

Intermediate frequency

IIM

Internal Interface Module

IMEM

Image Memory (module)

Ins

Inside

Int

Internal

ISEM

Integrated Stress Echo Module

L

Long or length

lb

Pound

lb/min

Pound per minute

LCP

Lower Control Panel (module)

LED

Light emitting diode

LEP

List of Effective Pages

Lk

Lock

LUT

Look-up table

4730-0036-02



LVD

Low Velocity Detection

Max

Maximum

MB

Megabyte

MDF

Minimum diastolic velocity and frequency

MO

Magneto-optical (drive) or machine option (files)

MON

Monitor

MOP

Module Operations Processor

MPS

Master Power Supply

Mt

Mounting

Mux

Multiplexer

NTSC

National Television Standards Committee (video standard)

Ny

Nylon

OD

Outside diameter

OEM

Original Equipment Manufacturer, peripheral device such as a printer, VCR, or camera

OSP

On-screen programming

Oz

Ounces

PAL

Phased Alteration by Line (European video standard)

PCHI

Power Contrast Harmonic Imaging

PCM

Pixel Conversion Module

4730-0036-02



PD

Processed Data (bus) or Phillips drive (screw)

PHI

Power Harmonic Imaging

PI

Pulsatility index

PIH

Pulse Inversion Harmonic

PIM

Peripheral Interface Module

PLL

Phase loop locking

PMI

Power Motion Imaging

Pnh

Pan head

Pnl

Panel

Plystr

Polyester

Ppr

Paper (capacitor)

PRF

Pulse repetition frequency

PRI

Pulse repetition interval

PS1

PS1-PS4 identify card cage slot positions

PSP1, PSP2

Pixel Space Processor (module)

PSF

Peak systolic frequency

PSV

Peak systolic velocity

RF

Radio frequency

RFI

Radio frequency interference

RI

Resistive index

4730-0036-02



Rkr

Rocker (switch)

Rx

Receive or receiver

SBY

Standby

SC

System Control (Interface Processor)

SCIP

System Control Interface Processor

SCSI

Small Computer Serial Interface

S/D

Systolic/diastolic ratio

S/H

Scanhead

Shld

Shield or shielded

S/HSEL

Scanhead Select (module)

Skh

Socket head

Spst

Single pole, single throw switch

SS

Stainless steel

SSP

Sample Space Processor (module)

St

Steel

S-VHS

Super VHS, a VCR video format

Sw

Switch

S/W

Software

T

Thick

TAF

Time-averaged frequency

4730-0036-02



TAM

Time-averaged mean velocity

TAP

Time-averaged peak velocity

TDI

Tissue Doppler Imaging

TGC

Time gain compensation

THI

Tissue Harmonic Imaging

TOC

Table of Contents

TSI

Tissue Specific Imaging

TSP

Tissue Specific Presets

TTag

Time Tag (bus)

Tx

Transmit or transmitter

UART

Universal Asynchronous Receiver Transmitter

UCP

Upper Control Panel (module)

UIF

User interface (LCP, UCP, and CPI)

Unshld

Unshielded

VA

Volt amps

Vac

Volts AC

Vdc

Volts DC

VTI

Velocity-time integral

V+V

Velocity + Variance

4730-0036-02


W

Wide (refers to a distance measurement) or watt (unit of electrical power)

w/

with

Wht

White

w/o

without

Xfmr

Transformer

Zn

Zinc

ZOOM

Video display is enlarged (spatially)

Terms Artifact

An undesirable imaging anomaly created as the result of acoustic effects or system processing.

Box

An image made up of a sequential set of columns that is usually smaller than the sector size would allow. Most commonly refers to the color flow image color box.

Burst

The transmitted waveform.

Drain

In a coaxial or shielded cable, a wire that is in contact with the shield's braid or foil for the length of the cable. It is used to make the mechanical attachment and consequently the electrical path from the shield to the connector or plug.

Page 446 Glossary: Terms

4730-0036-02


Fast Fourier Transformation

Mathematical method used with Doppler shift data to calculate the frequency spectrum that results in the Doppler display.

Interlaced

Video format where two fields make up one 30 Hz frame. Video rows (scan lines) of the raster are interlaced; that is, field one provides rows 1, 3, 5, and so on, then field two fills in rows 2, 4, 6, and so on. See “non-interlaced.”

Module Operations Processor

Board-level microprocessor dedicated to carrying out the functions of its hardware module. Communicates with the system CPU via a SCIP bus. Typically runs tasks such as initialization of registers, self-test, interpreting commands from the System CPU, and orchestrating real-time tasks on the hardware module.

Noise band

Any level of random background noise when the system speaker (not headphone) volume is set for a typical user setting (generally just above a mid-range setting). Also, any regular line or trace that clearly appears in the scrolling display (as three pixels per inch or more) at a level that is greater than the background noise.

Non-interlaced

Video format where the video rows are processed in sequence (1, 2, 3, 4, 5, 6, and so on) and updated at a 60 Hz rate. See “interlaced.”

National Television Standards Committee

525-line, 60Hz, composite video, usually color.


4730-0036-02


Original Equipment Manufacturer

A peripheral device (VCR, printer, camera).

On-screen programming

Refers to on-screen programming of a VCR, or other OEM device.

Phased Alteration by Line

625-line, 50Hz composite video, usually color.

Pulse repetition frequency

Rate at which ultrasound pulses are sent into the ti ssue. Based primarily on depth desired, but also depends on other variables such as dead time.

Pulse repetition interval

The time between ultrasound pulses. This time determines how much processing can take place and still keep up with the data acquisition.

System Control Interface Processor

Set of processors that reside on all modules that communicate with the CPU PCB. SCIP refers to the communication system, which includes protocol, firmware, and hardware.

Universal Asynchronous Receiver Transmitter Port

Serial communication port located on the card edge of the FEC. Also called debug port or diagnostic port.

Watchdog

A level detector, a comparator circuit, or a time-out circuit, that ensures the proper functioning of a supply, a regulator, or other circuitry. Disables the monitored circuit if it is out of specification or the timer is not reset.


4730-0036-02


Page 450 Index

Index Numerics 2D color controls, 130 2D controls, 124 2D performance tests annotation, 138 axial resolution, 136 Cineloop automatic playback, 138 Cineloop manual playback, 138 image quality, 136 penetration, 136 registration/measurement accuracy, 137

A Abbreviations, parts lists, 434 AC Input Module (ACIM), 46, 338 voltage locations, 184 Acquisition Subsystem, 51 Acquisition Subsystem buses, 68 Acronyms, 434 Adjustments monitor, 162 power supply, 162 Advanced Digital, Audio, Physio, & Translator (ADAPTR), 57, 330 Advanced IF Output Module (AIFOM), 56, 335

Alert information, 184 Analog Interface Module (AIM), 54, 321 Assembly. See Mechanical procedures Assistance, 2

B Backup Diags Data, 203 Biopsy guides, 422 Brightness, 121 Brightness. See Performance tests, monitor Bus functions, 68

C Cables, 220 AAM input external, 236, 237 internal, 234 AAM output external, 239 internal, 236 B/W printer signal, internal, 248 Codonics printer, 230 DDEA physio jack, 258 disk drive power, 280 disk drive signal with optical drive, 244

4730-0036-02


fan power, 282 ISEM adapter, 276 LED cable, 264 microphone, 261 microphone internal monitor, 268 Mitsubishi RGB printer, 256 monitor lower bezel, 259 monitor power, 283 monitor signal, 262 Multi-Image camera signal, internal, 246 OEM power 115 V, internal, 284 230 V, internal, 286 OEM, external, 228 On/Standby switch, 265 RCA-RCA stereo, 227 remote control port, 266 RGB printer signal, internal, 250 RGB printer, external,, 252 serial data, 232 Sony RGB printer, 254 SVHS VCR, external,, 242 VCR signal, internal, 240 Camera control settings, 109 Caution (defined), 34 Change history 150.23, 4252-0831-06 (NRR), 300-302 Channel Board (CB), 53, 321

Page 451 Index

Check Installed Software, 195 Checksums ADAPTR PROM, 331 AIFOM PROM, 337 CPU PROM, 328 FEC PROM, 319 PSP1 PROM, 326 SSP PROM, 333 Cineloop tests. See 2D performance tests Color Power Angio, 139 Color printers control settings Codonics NP-1660, 96 Mitsubishi CP700, 96 Mitsubishi CP800, 96 Sony UP5600, 96 Compatibility, 306 Comprehensive Test, 193 Connectors, 221 Contrast, 121 Contrast. See Performance tests, monitor Control panels. See Display Subsystem Control Subsystem, 48 Control Subsystem buses, 68 Copying presets, 189 Core bootup fault isolation, 172 Core bootup sequence, 176 Core dump utilities, 190 Corrugate crate, 85

4730-0036-02


Page 452 Index

E

CRCs ADAPTR PROM, 331 AIFOM PROM, 337 CPU PROM, 328 FEC PROM, 319 PSP1 PROM, 326 SSP PROM, 333 Current, chassis risk, 35

D Data paths 2D, 60 VCR playback path, external, 63 VCR playback path, internal, 62 VCR record path, external, 64 DDEA Module, 317 Device file, 115 Device table, 115 Diagnostics, 192 Disassembly. See Mechanical procedures Disinfectants, scanheads, 37 Disk Drive PCB (DDEA), 51, 313, 317 DiskLink, 144 Display Subsystem, 57 Doppler Acquisition PCB (DOPACQ), 55, 321 Doppler controls, 132 Dust, 77

ECG tests, 149 Electrical power requirements, 74 Electrical safety, 34 power cord voltages, 36 EMI/RFI, 77 Environmental, 74 dust, 77 electrical power requirements, 74 EMI/RFI, 77 ESD (electrostatic discharge), 76 lighting, 78 safety tests, 39 ventilation requirements, 73 Equipment protection, 37 ESD, 76 procedures and warranties, 36

F Fan filter cleaning, 168 Final inspection, 110 Front End Controller (FEC), 52, 318

G Grounding, system, 35

4730-0036-02


H Host table, 115

I Cables IIM to UIM, 273 Image Memory Module (IMEM), 50, 330 Image quality test. See 2D performance tests Installation inservice procedure (USA), 111 , 80 camera, 109 color printers Codonics NP-1660, 96 Mitsubishi CP700, 96 Mitsubishi CP800, 96 Sony UP5600, 96 corrugate crate unpacking details, 85 electrical inspection, 91 general inspection, 90 materials and equipment, 80 mechanical inspection, 91 monitor latch positions, 85 preliminary inspection, 81 setup, 92 VCR, 93

Page 453 Index

video printers Sony UP890, 107 wood crate unpacking details, 81 Installation defaults setup, 123 Internal Interface Module (IIM), 59, 322 ISEM tests, 151

K Keyboard tests, 122

L Lighting, 78 Lower User Interface Assy (UIF), 338

M Matrices biopsy guides, 422 machine options/software, 197 PCB replacement tables, 317 scanheads, 420 usage rules, 306 Measurement accuracy 2D, 137 Mechanical procedures control panels, 210 internal OEMs, 212

4730-0036-02


monitor, 209 On/Standby switch, 210 PCBs and modules, 208 Scanhead Select Module, 214 trackball, 210 Mechanical safety, 36 Mmode controls, 135 Monitor powerup displays, 121 Monitor adjustments, 162 Monitor internal cabling, 288 multiplane TEE temperature, 151

N NetLink installation, 113 performance test, 148 Network cable types, 79 Network requirements Image Management, 78

O OEM tests, 155 Operating system, 40 Optical disk, 188 Optical disk drive, 168 Ordering parts, 344

Page 454 Index

Output power monitor theory, 64

P Part numbers finding, 345 Partitioning, 40 Parts abbreviations, 434 command module figure, 380 external small parts table, 351 introduction, 344 ordering information, 344 Parts figure definitions, 346 Parts table definitions, 345 ATL part no., 346 description, 346 located on, 346 notes, 346 Patient data, 123 PCB LED card cage locations, 174 functions, 178 lighting sequence during bootup, 176 status after core bootup, 178 PCB replacement code legend, 316 PCB replacement tables ACIM, 338

4730-0036-02


ADAPTR, 330 AIFOM, 335 AIM, 321 Channel board, 321 CPU, 328 DDEA, 317 DOPACQ, 321 FEC, 318 IIM, 322 IMEM, 330 Lower UIF, 338 PCM, 322 PIM, 322 PSM, 317 PSP1, 325 PSP2, 325 SSP, 333 UIM, 337 Upper UIF, 338 Penetration test. See 2D performance tests Performance tests 2D, 136 2D color controls, 130 2D controls, 124 checklist, 157 Color Power Angio, 139 DiskLink, 144 Doppler controls, 132

Page 455 Index

ECG, 149 initial setup, 119 installation defaults setup, 123 introduction, 118 ISEM tests, 151 keyboard, 122 Mmode controls, 135 monitor, 121, 163 multiplane TEE temperature, 151 NetLink, 148 OEM tests, 155 patient data, 123 power up and initialization, 119 printer control settings, 95 PW Doppler noise bands, 142 scanhead initialization, 123 simultaneous modes, 141 steered CW noise bands, 142 system configuration, 121 test equipment and materials, 119 user interface tests, 122 VCR control settings, 93 Peripheral Interface Module (PIM), 59, 322 Pixel Conversion Module (PCM), 59, 322 Pixel Space Processor 1 (PSP1), 59, 325 Pixel Space Processor 2 (PSP2), 59, 325 Power cables, 280 Power cords

4730-0036-02


connecting, 36 Power monitor. See Output power monitor theory Power Subsystem, 42 Power Supply Module (PSM), 47, 183, 317 Power up and initialization performance tests, 119 Preinstallation, 72 Preventive maintenance, 168 Processing Subsystem, 55 PROM checksums/CRCs ADAPTR, 331 AIFOM, 337 CPU, 328 FEC, 319 PSP1, 326 SSP, 333 PROM replacement tables ADAPTR, 331 AIFOM, 335 CPU, 328 FEC, 319 PCM, 323 PSP1, 325 SSP, 333 PW Doppler noise bands, 142

Page 456 Index

Q Quality assurance. See Preventive maintenance

R Remote diagnostics, 206 Removal and replacement procedures. See also Mechanical procedures Resolution test. See also 2D performance tests

S Safety data, 34 Safety tests, 39 Sample Space Processor (SSP), 57, 333 Scanhead disinfection and sterilization, 37 Scanhead initialization, 123 Scanhead Select Module (S/HSEL), 55 Scanheads biopsy guides, 422 frequency information, 418, 420 matrix, 420 types, capabilities, advantages, 418 Shock hazards, 35 Show Bootup Status Report, 195 Show Installed Options, 196 Show Machine Configuration, 196 Signal cables, 227 Simultaneous modes, 141

HDI 3500 Service Manual Part 2

Recommend Documents