OFFICIAL WARWICK GIGBOARD USER MANUAL - RB 23110 B / RB 23100 B / RC 23120 B -
Congratulations on the purchase of your new Warwick Gigboard. Please, read the tips contained in these directions carefully, carefully, before installing and using the product. If you adhere to the advice given in the directions, then you will quickly be able to optimize the use of the gigboard.
IMPORTANT SAFETY INSTRUCTIONS:
CAUTION
RISK OF ELECTRIC SHOCK ! •Read these instructions. DO NOT OPEN •Keep these instructions. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK •Heed all warnings. DO NOT REMOVE COVER (OR BACK) NO USER-SERVICABLE PARTS INSIDE •Follow all instructions. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL •Do not use this apparatus near water. •Clean only with dry cloth. •Do not block any ventilation openings. Install in accordance with the manufacturer`s instructions. •Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. •Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. •Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. • Only use attachments/accessories specified by the manufacturer. manufacturer. •Use only the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip over. •Unplug this apparatus during lightning storms or when unused for long periods of time. • Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. •Warning - to reduce the rick of fire or electric shock, do not expose this apparatus to rain or moisture
Tips: • Never open the casing! You could suffer an electric shock! Leave all maintenance work to an expert. • Avoid dust and excessive humidity. • Connect the low voltage outputs, before connecting the board to a power outlet, in order to avoid a short circuit.
Description of Applications: The Warwick Gigboard 23110 offers connection options for up to 9V-floor effect-devices. The enclosed cable set includes a connection plug with 2.1 mm jack, 3.5 mm coaxial, as well as a battery clip to connect all standard devices. The signal-loop gives you the option, to leave all connected effects configured with the entire wiring intact (see drawing regarding RB 23110 B/B). These can be attached to the board, using the enclosed self-adhesive Velcro, and can simply be re-configured at any time. That means, you only need to wire up your guitar and amp! For easy transport you can stow the board including all effects-devices in the suitable ROCKBAG ® /ROCKCASE®. In addition to these features, the Gigboard RB 23100 B/B and the Effects Pedal Board RC 23120 B are equipped with a power supply unit and offer five 9V-outputs and one 12V-output. Due to two parallel wired up loops there are many other setup options (see drawings regarding RB 23100 B/B and RC 23120 B).
English
POSSIBLE
RB 23110 B/B
C O N FI G U RAT I O NS GUITA R IN
F OOTS WI TCH
4 x 9 V DC
EF F. LOOP
LOOP
RB 23100 B/B
GUITAR IN
12 V DC
FOOTSWITCH
EFF. LOOP
5 x 9 V DC
LOOP
12 V DC
FOOTSWITCH
5 x 9 V DC
12 V DC
FOOTSWITCH
EFF. LOOP LOOP
5 x 9 V DC
LOOP
MONO SETUP
MONO SETUP WITH CHANNEL FOOTSWITCH
GUITAR IN
GUITAR IN
EFF. LOOP
LOOP
AMP EFFECT LOOP ON LOOP 2
GUITAR IN
12 V DC
FOOTSWITCH
5 x 9 V DC
LOOP
OUTBOARD EFFECTS RACK IN EFFECTS CHAIN
GUITAR IN
FOOTSWITCH
EFF. LOOP
GUITAR IN
FOOTSWITCH
EFF. LOOP LOOP
GUITAR IN
FOOTSWITCH
EFF. LOOP
GUITAR IN
FOOTSWITCH
EFF. LOOP LOOP
12 V DC
5 x 9 V DC
STEREO GUITAR WITH DUAL AMPS
LOOP
12 V DC
5 x 9 V DC
STEREO EFFECTS PEDAL WITH DUAL AMPS
English
LOOP
EFF. LOOP
RC 23120 B
GUITAR IN
MAINSIN
FOOTSWITCH
12 V DC
INTERNALPOWERSUPPLY 60417-2-IEC-5172 INPUT 230V~50Hz28W OUTPUT 5x9V,1x12V 400mAMAX
5 x 9 V DC
MAINSIN
LOOP EFFECTSPEDALCASERB23120B
P OW ER
GUITAR IN
12 V DC
INTERNALPOWERSUPPLY 60417-2-IEC-5172 INPUT 230V~50Hz28W OUTPUT 5x9V,1x12V 400mAMAX
P OW E R
5 x 9 V DC
O L
EFF. LOOP
5 x 9 V DC
GUITAR IN
MAINSIN
12 V DC
INTERNALPOWERSUPPLY 60417-2-IEC-5172 INPUT 230V~50Hz28W OUTPUT 5x9V,1x12V 400mAMAX
O L
FOOTSWITCH
5 x 9 V DC LOOP
EFFECTS PEDALCAS E RB 23120 B
AMP EFFECT LOOP ON LOOP 1
MAINSIN
P OW ER
MONO SETUP
LOOP EFFECTSPEDALCASERB23120B
EFF. LOOP
LOOP EFFECTSPEDALCASERB23120B
FOOTSWITCH
FOOTSWITCH
12 V DC
INTERNALPOWERSUPPLY 60417-2-IEC-5172 INPUT 230V~50Hz28W OUTPUT 5x9V,1x12V 400mAMAX
O L
MONO SETUP WITH CHANNEL FOOTSWITCH
MAINSIN
GUITAR IN
EFF. LOOP
P OW ER
O L
OUTBOARD EFFECTS RACK IN EFFECTS CHAIN
GUITAR IN
FOOTSWITCH
EFF. LOOP
GUITAR IN
FOOTSWITCH
EFF. LOOP
GUITAR IN
FOOTSWITCH
EFF. LOOP
GUITAR IN
FOOTSWITCH
EFF. LOOP
12 V DC
INTERNALPOWERSUPPLY 60417-2-IEC-5172 INPUT 230V~50Hz28W OUTPUT 5x9V,1x12V 400mAMAX
5 x 9 V DC
MAINSIN
LOOP EFFECTSPEDALCASERB23120B
P OW ER
O L
STEREO GUITAR WITH DUAL AMPS
12 V DC
INTERNALPOWERSUPPLY 60417-2-IEC-5172 INPUT 230V~50Hz28W OUTPUT 5x9V,1x12V 400mAMAX
5 x 9 V DC LOOP
EFFECTSPEDALCASERB23120B
P OW ER
O L
STEREO EFFECTS PEDAL WITH DUAL AMPS
English
EFF. LOOP
