Search
Home
Saved
870 views
0
Upload
Sign In
RELATED TITLES
0
Function to change the table Uploaded by Nalaka Deshan Kariyawasam
Books
Audiobooks
Magazines
Save
Embed
Share
Print
Download
News
Documents
Sheet Music
Join
CNC Advanced Concepts
1
of 45
User Manual of 710c_SDK
ZPIO
Search document
Function to change the table Version Date Changes Rev 2.43 2008.10 FKAttend.OCX added a "2.1.3 ConnectUSB", "2.2.18 BenumbAllManage r "function. FKAttend.DLL added a "3.1.3 FK_ConnectUSB", "3.2.18 FK_BenumbAll Manager "function. Management data ("2.3.3 GetSuperLogData") and out of the record data ("2.3.7 GetGe neralLogData ") added a record project. Rev 2.44 2008.11 fingerprints can be registered per user, the number of expansion from three to ten. ("2.2.1 GetEnrollData") Door status in the new state value added DOOR_CONTROLRESET. (See "2.7.1 GetDoorSta tus ") Rev 2.45 2008.12 updated setup: Add Wavedown section. Rev 2.46 2009.01 updated setup: Adding in the Wavedown Settings button rings. Setup information added to the language settings (in Japanese). Update FKAttendOCX and FKAttendDLL In FKAttendOCX read and set through USB to add the names of data variables Reference USBGetOneEnrollData, 2.2.9 USBGetOneEnrollDataWithString, 2.2.10 USBSetOneEnrollData, 2.2.11 USBSetOneEnrollDataWithString. 2.2.12 In FKAttendDLL through USB to add data to read and set the name variable. Reference FK_USBGetOneEnrollData, 3.2.9 FK_USBGetOneEnrollDataWithString, 3.2.10 FK_USBSetOneEnrollData, 3.2.11 FK_USBSetOneEnrollDataWithString.3.2.12 Read and set in FKAttendOCX hardware information to add matching mode. (See GetDeviceInfo, SetDeviceInfo. 2.5.7, 2.5.8) Read and set in FKAttendDLL hardware information to add matching mode. (See FK_GetDeviceInfo, FK_SetDeviceInfo. 3.5.7, 3.5.8) Rev2.47 2009.02 upgrade installation software: an increase in the installation information in the lock mode and multi-user mode. Sign up to name vote onof this title In FKAttend OCX, FKAttend DLL generated by adding the the IP address of Useful Not useful the connecting hardware function Number (See ConnectGetIP,, FK_ConnectGetIP, 2.1.5, 3.1.5)
Home
Saved
Books
Audiobooks
Magazines
News
Documents
Sheet Music
Upload
Sign In
Join
Search
Home
Saved
870 views
0
Upload
Sign In
RELATED TITLES
0
Function to change the table Uploaded by Nalaka Deshan Kariyawasam
Books
Audiobooks
Magazines
Save
Embed
Share
Print
Download
News
Documents
Sheet Music
Join
CNC Advanced Concepts
1
of 45
User Manual of 710c_SDK
ZPIO
Search document
Reference 3.1) Rev2.49 2009.04 in FKAttend.OCX and FKAttend.DLL, there is no increase in automatic detection of the normal USB slave Rev2.50 2009.05 FKAttend.OCX, FKAttend.DLL FKAttend.DLL add daylight saving time setting function. (See GetAdjustInfo, SetAdjustInfo 2.8.1, 2.8.2) (See FK_ GetAdjustInfo, FK_SetAdjustInfo 3.8.1, 3.8.2) Update setup program: additional UseShift function, CMOS and automatically adjusts brightness color options. All rights reserved Without our permission, may not be copied or transfer some or all of the content. In order to improve the product may function, the contents of the book that is described as a more readily available To change without notice. Directory Summary ................................................ ................................................ 1 ............................. ............................. 6 2 FKAttend.OCX interface ............................................ ............................................ ................... ................... 7 Connect and disconnect the machine ............................................ ............................................ 2.1 ................... 7 2.1.1 ConnectComm .............................................. .............................................. ......................... 7 2.1.2 ConnectNet .............................................. .............................................. .......................... .......................... 7 2.1.3 ConnectUSB ............................................. ............................................... .......................... .......................... 8 2.1.4 DisConnect ............................................. ............................................... .......................... .......................... 8 2.1.5 ConnectGetIP ........................................... .............................................. ... ............................. 8 2.2 Registration Data Management .............................................. .............................................. ................... 8 2.2.1 GetEnrollData ........................................... .............................................. ... ....................... 8 2.2.2 GetEnrollDataWithString ........................................... .............................................. ... ............. 9 2.2.3 PutEnrollData ............................................. ............................................... ....................... ....................... 9 2.2.4 PutEnrollDataWithString ............................................ .............................................. .. ............ 10 2.2.5 SaveEnrollData ............................................. ............................................... ..................... 10 2.2.6 DeleteEnrollData ............................................. ............................................... ................... 10 2.2.7 USBReadAllEnrollDataFromFile .............................................. .............................................. ....... 10 2.2.8 USBReadAllEnrollDataCount ........................................... .............................................. ... .......... 11 2.2.9 USBGetOneEnrollData ............................................ .............................................. .. ................ 11 2.2.10 USBGetOneEnrollDataWithString .............................................. .............................................. ..... 11 2.2.11 USBSetOneEnrollData ............................................. ............................................... ............... 12 Sign up to vote on this title 2.2.12 USBSetOneEnrollDataWithString .............................................. ...................................... ........ ..... 12 Useful Not useful12 ........................ 2.2.13 USBWriteAllEnrollDataToFile ............................................. ...................... . ....... 2.2.14 ReadAllUserID .............................................. .............................................. ..................... 13 2.2.15 GetAllUserID 13
Home
Saved
Books
Audiobooks
Magazines
News
Documents
Sheet Music
Upload
Sign In
Join
Search
Home
Saved
870 views
0
Upload
Sign In
RELATED TITLES
0
Function to change the table Uploaded by Nalaka Deshan Kariyawasam
Books
Audiobooks
Magazines
Save
Embed
Share
Print
Download
News
Documents
Sheet Music
Join
CNC Advanced Concepts
1
of 45
User Manual of 710c_SDK
ZPIO
Search document
Reference 3.1) Rev2.49 2009.04 in FKAttend.OCX and FKAttend.DLL, there is no increase in automatic detection of the normal USB slave Rev2.50 2009.05 FKAttend.OCX, FKAttend.DLL FKAttend.DLL add daylight saving time setting function. (See GetAdjustInfo, SetAdjustInfo 2.8.1, 2.8.2) (See FK_ GetAdjustInfo, FK_SetAdjustInfo 3.8.1, 3.8.2) Update setup program: additional UseShift function, CMOS and automatically adjusts brightness color options. All rights reserved Without our permission, may not be copied or transfer some or all of the content. In order to improve the product may function, the contents of the book that is described as a more readily available To change without notice. Directory Summary ................................................ ................................................ 1 ............................. ............................. 6 2 FKAttend.OCX interface ............................................ ............................................ ................... ................... 7 Connect and disconnect the machine ............................................ ............................................ 2.1 ................... 7 2.1.1 ConnectComm .............................................. .............................................. ......................... 7 2.1.2 ConnectNet .............................................. .............................................. .......................... .......................... 7 2.1.3 ConnectUSB ............................................. ............................................... .......................... .......................... 8 2.1.4 DisConnect ............................................. ............................................... .......................... .......................... 8 2.1.5 ConnectGetIP ........................................... .............................................. ... ............................. 8 2.2 Registration Data Management .............................................. .............................................. ................... 8 2.2.1 GetEnrollData ........................................... .............................................. ... ....................... 8 2.2.2 GetEnrollDataWithString ........................................... .............................................. ... ............. 9 2.2.3 PutEnrollData ............................................. ............................................... ....................... ....................... 9 2.2.4 PutEnrollDataWithString ............................................ .............................................. .. ............ 10 2.2.5 SaveEnrollData ............................................. ............................................... ..................... 10 2.2.6 DeleteEnrollData ............................................. ............................................... ................... 10 2.2.7 USBReadAllEnrollDataFromFile .............................................. .............................................. ....... 10 2.2.8 USBReadAllEnrollDataCount ........................................... .............................................. ... .......... 11 2.2.9 USBGetOneEnrollData ............................................ .............................................. .. ................ 11 2.2.10 USBGetOneEnrollDataWithString .............................................. .............................................. ..... 11 2.2.11 USBSetOneEnrollData ............................................. ............................................... ............... 12 Sign up to vote on this title 2.2.12 USBSetOneEnrollDataWithString .............................................. ...................................... ........ ..... 12 Useful Not useful12 ........................ 2.2.13 USBWriteAllEnrollDataToFile ............................................. ...................... . ....... 2.2.14 ReadAllUserID .............................................. .............................................. ..................... 13 2.2.15 GetAllUserID 13
Home
Saved
Books
Audiobooks
Magazines
News
Documents
Sheet Music
Upload
Sign In
Join
Search
Home
Saved
870 views
0
Upload
Sign In
RELATED TITLES
0
Function to change the table Uploaded by Nalaka Deshan Kariyawasam
Books
Audiobooks
Magazines
Save
Embed
Share
Print
Download
News
Documents
Sheet Music
Join
CNC Advanced Concepts
1
of 45
User Manual of 710c_SDK
ZPIO
Search document
2.3.8 EmptyGeneralLogData .............................................. .............................................. ................ 17 -12.3.10 GetSuperLogData_1 .............................................. .............................................. ...................... 17 2.4 User Information I nformation Management .............................................. .............................................. .................. .................. 20 2.4.1 EnableUser ........................................... .............................................. ... ......................... 20 2.4.2 ModifyPrivilege ............................................. ............................................... .................... 20 2.4.3 GetUserName ............................................. ............................................... ........................ ........................ 20 2.4.4 SetUserName ............................................. ............................................... ........................ ........................ 20 2.4.5 GetNewsMessage ............................................ .............................................. .. ..................... 21 2.4.6 SetNewsMessage ........................................... .............................................. ... ..................... 21 2.4.7 GetUserNewsID ........................................... .............................................. ... ...................... 21 2.4.8 SetUserNewsID .............................................. .............................................. ...................... 21 2.5 Machine Management ............................................... ............................................... ..................... 23 2.5.1 EnableDevice .............................................. .............................................. ....................... ....................... 23 2.5.2 PowerOnAllDevice ............................................. ............................................... ................... 23 2.5.3 PowerOffDevice .............................................. .............................................. ..................... 23 2.5.4 GetDeviceTime ............................................ .............................................. .. ...................... ...................... 23 2.5.5 SetDeviceTime ........................................... .............................................. ... ...................... 23 2.5.6 GetDeviceStatus ............................................. ............................................... .................... 24 2.5.7 GetDeviceInfo ........................................... .............................................. ... ...................... 24 2.5.8 SetDeviceInfo .............................................. .............................................. ...................... 25 2.5.9 GetProductData ............................................. ............................................... ..................... 25 2.5.10 GetDeviceVersion ........................................... .............................................. ... .................. 25 2.5.11 GetDeviceTime_1 ............................................. ............................................... ........................ ........................ 25 2.5.12 SetDeviceTime_1 ............................................. ............................................... ........................ ........................ 25 Ring Management .............................................. .............................................. 2.6 ...................... 27 2.6.1 GetBellTime ........................................... .............................................. ... ........................ 27 2.6.2 GetBellTimeWithString .............................................. .............................................. .............. 27 2.6.3 SetBellTime .............................................. .............................................. ........................ ........................ 27 2.6.4 SetBellTimeWithString ............................................. ............................................... .............. 27 2.7 doorbell Management ............................................... ............................................... ..................... 29 2.7.1 GetDoorStatus ........................................... .............................................. ... ...................... 29 2.7.2 SetDoorStatus .............................................. .............................................. ...................... 29 2.7.3 GetPassTime ............................................. ............................................... ........................ ........................ 29 2.7.4 GetPassTimeWithString ............................................. ............................................... .............. 30 Sign up to vote on this title 2.7.5 SetPassTime ............................................. ............................................... ........................ ..................... ... 30 Useful Not useful 2.7.6 SetPassTimeWithString ............................................. .............................................. . .............. 30 2.7.7 GetUserPassTime ........................................... .............................................. ... .................... 30 2.7.8 GetUserPassTimeWithString .......................................... 31
Home
Saved
Books
Audiobooks
Magazines
News
Documents
Sheet Music
Upload
Sign In
Join
Search
Home
Saved
870 views
0
Upload
Sign In
RELATED TITLES
0
Function to change the table Uploaded by Nalaka Deshan Kariyawasam
Books
Audiobooks
Magazines
Save
Embed
Share
Print
Download
News
Documents
Sheet Music
Join
CNC Advanced Concepts
1
of 45
User Manual of 710c_SDK
ZPIO
Search document
Daylight savings time management ............................................. ............................................. 2.8 ........................ 29 2.8.1 GetAdjustInfo .............................................. .............................................. ........................... ........................... 29 2.8.2 SetAdjustInfo ............................................. ............................................... ........................... ........................... 29 3 FKAttend.DLL interface ............................................ ............................................ .................. .................. 35 Connect and disconnect the machine ............................................ ............................................ 3.1 .................. 35 3.1.1 FK_ConnectComm ............................................ .............................................. .. ..................... 35 3.1.2 FK_ConnectNet ............................................ .............................................. .. ...................... ...................... 35 3.1.3 FK_ConnectUSB .............................................. .............................................. ...................... 35 3.1.4 FK_DisConnect .............................................. .............................................. ...................... 35 3.1.5 FK_ConnectGetIP ............................................. ............................................... ......................... ......................... 28 3.2 Registration Data Management .............................................. .............................................. .................. 36 3.2.1 FK_GetEnrollData ............................................. ............................................... ................... 36 3.2.2 FK_GetEnrollDataWithString .............................................. .............................................. ......... 36 3.2.3 FK_PutEnrollData ............................................. ............................................... ................... 36 3.2.4 FK_PutEnrollDataWithString ............................................. ............................................... ......... 36 3.2.5 FK_SaveEnrollData ........................................... .............................................. ... .................. 37 3.2.6 FK_DeleteEnrollData .............................................. .............................................. ................ 37 3.2.7 FK_USBReadAllEnrollDataFromFile .............................................. .............................................. .... 37 3.2.8 FK_USBReadAllEnrollDataCount .............................................. .............................................. ....... 37 3.2.9 FK_USBGetOneEnrollData .............................................. .............................................. ............. 37 3.2.10 FK_USBGetOneEnrollDataWithString .............................................. .............................................. .. 38 3.2.11 FK_USBSetOneEnrollData ........................................... .............................................. ... ............ 38 3.2.12 FK_USBSetOneEnrollDataWithString .............................................. .............................................. .. 38 3.2.13 FK_USBWriteAllEnrollDataToFile .............................................. .............................................. .... 38 3.2.14 FK_ReadAllUserID ............................................ .............................................. .. .................. 38 3.2.15 FK_GetAllUserID .............................................. .............................................. ................... 39 3.2.16 FK_EmptyEnrollData ............................................ .............................................. .. ................ 39 3.2.17 FK_ClearKeeperData ........................................... .............................................. ... ................ 39 3.2.18 FK_BenumbAllManager .............................................. .............................................. ............... 39 Data Management ............................................. ............................................... 3.3 Records .................. 40 3.3.1 FK_LoadSuperLogData .............................................. .............................................. ................ 40 3.3.2 FK_USBLoadSuperLogDataFromFile .............................................. .............................................. ..... 40 3.3.3 FK_GetSuperLogData .............................................. .............................................. ................. 40 3.3.4 FK_EmptySuperLogData .............................................. .............................................. ............... 40 Sign up to vote on this title -3 Useful .............. Not useful 3.3.5 FK_LoadGeneralLogData .............................................. .............................................. 40 3.3.6 FK_USBLoadGeneralLogDataFromFile .............................................. .............................................. ... 41 3.3.7 FK_GetGeneralLogData ............... 41
Home
Saved
Books
Audiobooks
Magazines
News
Documents
Sheet Music
Upload
Sign In
Join
Search
Home
Saved
870 views
0
Upload
Sign In
RELATED TITLES
0
Function to change the table Uploaded by Nalaka Deshan Kariyawasam
Books
Audiobooks
Magazines
Save
Embed
Share
Print
Download
News
Documents
Sheet Music
Join
CNC Advanced Concepts
1
of 45
User Manual of 710c_SDK
ZPIO
Search document
3.4.8 FK_SetUserNewsID .............................................. ................... 43 3.5 Machine Management ............................................... ..................... 43 3.5.1 FK_EnableDevice .............................................. .................... 43 3.5.2 FK_PowerOnAllDevice .............................................. ................ 43 3.5.3 FK_PowerOffDevice .............................................. .................. 44 3.5.4 FK_GetDeviceTime .............................................. ................... 44 3.5.5 FK_SetDeviceTime .............................................. ................... 44 3.5.6 FK_GetDeviceStatus .............................................. ................. 44 3.5.7 FK_GetDeviceInfo .............................................. ................... 44 3.5.8 FK_SetDeviceInfo .............................................. ................... 44 3.5.9 FK_GetProductData .............................................. .................. 45 3.5.10 FK_GetDeviceVersion .............................................. ............... 45 3.5.11 FK_GetDeviceTime_1 .............................................. ..................... 45 3.5.12 FK_SetDeviceTime_1 .............................................. ..................... 45 Ring Management .............................................. 3.6 ...................... 45 3.6.1 FK_GetBellTime .............................................. ..................... 45 3.6.2 FK_GetBellTimeWithString .............................................. ........... 46 3.6.3 FK_SetBellTime .............................................. ..................... 46 3.6.4 FK_SetBellTimeWithString .............................................. ........... 46 3.7 doorbell Management ............................................... ..................... 46 3.7.1 FK_GetDoorStatus .............................................. ................... 46 3.7.2 FK_SetDoorStatus .............................................. ................... 47 3.7.3 FK_GetPassTime .............................................. ..................... 47 You're Reading a Preview 3.7.4 FK_GetPassTimeWithString .............................................. ........... 47 3.7.5 FK_SetPassTime .............................................. 47 Unlock full access with a free ..................... trial. 3.7.6 FK_SetPassTimeWithString .............................................. ........... 47 3.7.7 FK_GetUserPassTime .............................................. ................. 47 Download With Free Trial -43.7.8 FK_GetUserPassTimeWithString .............................................. ....... 48 3.7.9 FK_SetUserPassTime .............................................. ................. 48 3.7.10 FK_SetUserPassTimeWithString .............................................. ...... 48 3.7.11 FK_GetGroupPassTime .............................................. ............... 48 3.7.12 FK_GetGroupPassTimeWithString .............................................. ..... 48 3.7.13 FK_SetGroupPassTime .............................................. ............... 49 3.7.14 FK_SetGroupPassTimeWithString .............................................. ..... 49 Sign up.................. to vote on this 3.7.15 FK_GetGroupMatch .............................................. 49title useful 49 Useful Not ........ 3.7.16 FK_GetGroupMatchWithString .............................................. 3.7.17 FK_SetGroupMatch .............................................. .................. 49 3.7.18 FK_SetGroupMatchWithString ........................................... 50
Home
Saved
Books
Audiobooks
Magazines
News
Documents
Sheet Music
Upload
Sign In
Join
Search
Home
Saved
870 views
0
Upload
Sign In
RELATED TITLES
0
Function to change the table Uploaded by Nalaka Deshan Kariyawasam
Books
Audiobooks
Magazines
Save
Embed
Share
Print
Download
News
Documents
Sheet Music
Join
CNC Advanced Concepts
1
of 45
User Manual of 710c_SDK
ZPIO
Search document
4.1.6 ADJUSTINFO structure ............................................ ......................... 52 4.2 Error Code Table .............................................. .................... 52 -51 Summary The manual explains FK6xx provided on this series of fingerprint attendance application development methods. About OEM products FKAttend instructions. To FKAttend. Ocx, FKAttend.dll, FKViaDev.dll composition FKAttend.ocx is the top software and machine interface OCX. FKAttend.dll machine is connected with the upper part of the software dll, function and FKAttend. Ocx the same. FKViaDev.dll machine communication with the communication interface dll. Interface to seven major components. ① connect and disconnect the machine - the part that connect and disconnect with the machine part. ② Registration Data Management - This section describes how to read and delete the user's registration data. ③ log data management - management of records and explain how to read and out of record. ④ user information management - to set the user's name, notification and other information. ⑤ machines management - to set the machine time, status, information. ⑥ rings Management - Set ring time. You're Reading a Preview ⑦ doorbell management - to set the door operation. -6Unlock full access with a free trial. 2 FKAttend.OCX interface 2.1 connect and disconnect the machine Download With Free Trial 2.1.1 ConnectComm The form of long ConnectComm (long nMachineNumber, long nComPort, long nBaudRate, char * pstrTelNumber, long nWaitDialTime, long nLicense) Function through the RS-232/485 cable connected to the machine to open COM interface. nMachineNumber to connect to the machine number. nComPort COM Port Number Sign up to vote on this title nBaudRate COM baud rate Useful Not useful pstrTelNumber Phone nWaitDialTime phone connection standby time (ms) Parameters
Home
Saved
Books
Audiobooks
Magazines
News
Documents
Sheet Music
Upload
Sign In
Join
Search
Home
Saved
870 views
0
Upload
Sign In
RELATED TITLES
0
Function to change the table Uploaded by Nalaka Deshan Kariyawasam
Books
Audiobooks
Magazines
Save
Embed
Share
Print
Download
News
Documents
Sheet Music
Join
CNC Advanced Concepts
1
of 45
User Manual of 710c_SDK
ZPIO
Search document
The form of long ConnectNet (long nMachineNumber, char * strIpAddress, long nPort, long n TimeOut, long nProtocolType, long nNetPassword, long nLicense) Function through the network cable to connect the machine when the open network interfaces. nMachineNumber to connect to the machine number. strIpAddress machine to connect to TCP / IP address. nPort network interface number. nTimeOut connection standby time (ms) nProtocolType types of communication protocols nNetPassword password Netcom Communications Parameters nLicense connection permit number. Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code table." A machine is not the case with the network connection in accordance with "nTimeOut" standby time after the return error code. 2 "nProtocolType" specified types of network communications protocol. 0: PROTOCOL_TCPIP - TCP / IP communication 1: PROTOCOL_UDP - UDP communication. Other 3 "nLicense" is "2.1.1 ConnectComm" and the same. 2.1.3 ConnectUSB Reading a Preview long nLicense) The form of long ConnectUSBYou're (long nMachineNumber, -7Unlock full access with a free trial. Function via USB cable connection to communicate with the computer, open the USB interface. Download With Free Trial To connect the machine parameters nMachineNumber number. nLicense connection permit number. Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code table." Other 1 "nLicense" is "2.1.1 ConnectComm" and the same. 2.1.4 DisConnect Form void DisConnect (void) Function disconnect the connection with the machine. Sign up to vote on this title Parameters Useful Not useful Return no Off the other one connected with the ConnectComm or ConnectNet off the machine was open only the corresponding interface.
Home
Saved
Books
Audiobooks
Magazines
News
Documents
Sheet Music
Upload
Sign In
Join
Search
Home
Saved
870 views
0
Upload
Sign In
RELATED TITLES
0
Function to change the table Uploaded by Nalaka Deshan Kariyawasam
Books
Audiobooks
Magazines
Save
Embed
Share
Print
Download
News
Documents
Sheet Music
Join
CNC Advanced Concepts
1
of 45
User Manual of 710c_SDK
ZPIO
Search document
anEnrollNumber registration number anBackupNumber registration number and kinds of data apnMachinePrivi lege The parameters of the user's operating authority directs apnEnrollData directs the parameters of the fingerprint data Parameters apnPassWord password or card number directs the parameters of the data Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code Table. " A successful implementation in accordance with the "anBackupNumber" corresponds to the registration data to return to the "apnEnrollData" or "ApnPassWord". Other 2 to return to the "apnMachinePrivilege" means the operating authority refer "2.4.2 ModifyPrivile ge ". 3, each user can register three fingerprints and a password or card number, the registration information is reflected in the "anBackupNumbe r "on. "AnBackupNumber" the following meanings: 0: BACKUP_FP_0 - the first fingerprint area to be registered You're Reading a Preview ... ... 9: BACKUP_FP_9 - fingerprints arefull registered District Unlock access with Ninth a free trial. 10: BACKUP_PSW - the password to be registered -8Download With Free Trial 11: BACKUP_CARD - card number to be registered 2.2.2 GetEnrollDataWithString The form of long GetEnrollDataWithString (long anEnrollNumber, long anBackupNumber, long * ApnMachinePrivilege, char * apstrEnrollData) As test function and GetEnrollData instructions, registration form to get information to the text column. anEnrollNumber registration number Sign up to vote on this title anBackupNumber registration number and kinds of data Useful Not useful apnMachinePrivi lege The parameters of the user's operating authority directs
Home
Saved
Books
Audiobooks
Magazines
News
Documents
Sheet Music
Upload
Sign In
Join
Search
Home
Saved
870 views
0
Upload
Sign In
RELATED TITLES
0
Function to change the table Uploaded by Nalaka Deshan Kariyawasam
Books
Audiobooks
Magazines
Save
Embed
Share
Print
Download
News
Documents
Sheet Music
Join
CNC Advanced Concepts
1
of 45
User Manual of 710c_SDK
ZPIO
Search document
rivilege, long * apnEnrollData, long anPassword) Function will be registered users of the operating authority and registration data to the machine. anEnrollNumber registration number anBackupNumber registration number and kinds of data anMachinePrivilege the user's operating authority apnEnrollData directs the parameters of the fingerprint data Parameters anPassword password or card number data. Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code Table. " 1 "anBackupNumber" refer to "2.2.1 GetEnrollData". 2 "anMachinePrivilege" refer to "2.4.2 ModifyPrivilege". 3 in accordance with the "anBackupNumber" send. "ApnEnrollData" or "apnPassword" data. Other 4, after executing commands to the machine instruction execution SaveEnrollData save the data transmission, SaveE nrollData instructions, please refer to "2.2.5 SaveEnrollData". 2.2.4 PutEnrollDataWithString The form of long PutEnrollDataWithString (long anEnrollNumber, long anBackupNumber, long You're Reading a Preview anMachinePrivilege, BSTR apstrEnrollData) Function and PutEnrollData command similar toa the registration information will be Unlock full access with free trial. recorded in the form of text columns. anEnrollNumber registration number Download With Free Trial anBackupNumber registration number and kinds of data anMachinePrivilege the user's operating authority Parameters apstrEnrollData directs the parameters of registration data Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code Table. " -9 Sign upinformation to vote on thisdirectly title 1 regardless of the other "anBackupNumber" registration to the Useful Not useful registration of "apstrEnrollData" on. Note 2 on the other parameters, please refer to "2.2.3 PutEnrollData". 2.2.5 SaveEnrollData
Home
Saved
Books
Audiobooks
Magazines
News
Documents
Sheet Music
Upload
Sign In
Join
Search
Home
Saved
870 views
0
Upload
Sign In
RELATED TITLES
0
Function to change the table Uploaded by Nalaka Deshan Kariyawasam
Books
Audiobooks
Magazines
Save
Embed
Share
Print
Download
News
Documents
Sheet Music
Join
CNC Advanced Concepts
1
of 45
User Manual of 710c_SDK
ZPIO
Search document
The form of long DeleteEnrollData (long anEnrollNumber, long anBackupNumber) Remove the specified function from the registration data. Parameters anEnrollNumber registration number anBackupNumber registration number and kinds of data Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code Table. " If the machine on the other one did not specify if the data is the command failed. 2.2.7 USBReadAllEnrollDataFromFile The form of long USBReadAllEnrollDataFromFile (char * apstrFilePath) USB memory management function machine registration data file will read the PC's memory registration data for analysis. File name parameter apstrFilePath Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code Table. " Other 1 file structure is not correct instruction execution is failed. 2 USB memory on the machine refer to the machine using manual methods. 2.2.8 USBReadAllEnrollDataCount The form of long USBReadAllEnrollDataCount (long * apnValue) Function returned by USBReadAllEnrollDataFromFile PC memory read instruction the number of registration data. Parameters apnValue parameter directs registration information You're Reading Preview Returns Returns 1 on success, failure to returnathe corresponding error code. Error code specific instructions referUnlock to "4.2 full error access code with a free trial. Table. " The other 1 with the directive, first read the information with Download With Free Trial USBReadAllEnrollDataFromFile instruction. 2.2.9 USBGetOneEnrollData The form of long USBGetOneEnrollData (long * apnEnrollNumber, long * apnBackupNumber, long * ApnMachinePrivilege, long * apnEnrollData, long * apnPassWord, long * apnEnab
eFlag, BSTR * apnEnrollName) - 10 Sign up to vote on this title registration Function for reading instruction through USBReadAllEnrollDataFromFile Useful Not useful information. apnEnrollNumber registration number parameter directs apnBackupNumber registration number parameter indicates the type of information
Home
Saved
Books
Audiobooks
Magazines
News
Documents
Sheet Music
Upload
Sign In
Join
Search
Home
Saved
870 views
0
Upload
Sign In
RELATED TITLES
0
Function to change the table Uploaded by Nalaka Deshan Kariyawasam
Books
Audiobooks
Magazines
Save
Embed
Share
Print
Download
News
Documents
Sheet Music
Join
CNC Advanced Concepts
1
of 45
User Manual of 710c_SDK
ZPIO
Search document
Memory. GetEnrollData instructions on the instructions refer to "2.2.1 GetEnrollData". After 2 to get the data returned RUNERR_LOG_END. 3 If by USBReadAllEnrollDataFromFile instructions to the computer does not read the registration information and data If instruction is to fail. Other 4 "apnEnableFlag" explanation, please refer to "2.4.1 EnableUser". 2.2.10 USBGetOneEnrollDataWithString The form of long USBGetOneEnrollDataWithString (long * apnEnrollNumber, long * apnBackupNum ber, long * apnMachinePrivilege, BSTR * apstrEnrollData, long * apnEnableFlag, BSTR * apnEnrollName) Function and USBGetOneEnrollData command similar to the registration form to obtain information in the text column. apnEnrollNumber registration number parameter directs apnBackupNumber registration data type parameter indicates the number of those 자 apnMachinePrivilege the parameters of the user's operating authority directs apstrEnrollData parameter directs registration information apnEnableFlag parameters permit the user's machine instructions are Parameters apnEnrollName user directs the name of the parameter Returns Returns 1 on success, failure to return the corresponding error code. Error a Preview code specific instructions referYou're to "4.2Reading error code table." 1 The command and GetEnrollDataWithString Unlock full access withcommand a free trial. similar to the part is not the same as direct connection Just use the USB memory. See instructions on GetEnrollDataWithString "2.2.2 GetEn Download With Free Trial
rollDataWithString ". Other 2 additional help, please refer to "2.2.9 USBGetOneEnrollData". 2.2.11 USBSetOneEnrollData The form of long USBSetOneEnrollData (long anEnrollNumber, long anBackupNumber, long anMa chinePrivilege, long * apnEnrollData, long anPassWord, long anEnableFlag, LPC Sign up to vote on this title TSTR anEnrollName) Not useful Useful Function to the user's operating authority and registration data into USB memory with the file, in the PC memory is formalized. anEnrollNumber registration number
Home
Saved
Books
Audiobooks
Magazines
News
Documents
Sheet Music
Upload
Sign In
Join
Search
Home
Saved
870 views
0
Upload
Sign In
RELATED TITLES
0
Function to change the table Uploaded by Nalaka Deshan Kariyawasam
Books
Audiobooks
Magazines
Save
Embed
Share
Print
Download
News
Documents
Sheet Music
Join
CNC Advanced Concepts
1
of 45
User Manual of 710c_SDK
ZPIO
Search document
1, similar to the command and PutEnrollData not the same as part of the instruction is not directly connected, but with USB storage Storage device. PutEnrollData instructions on the instructions refer to "2.2.3 PutEnrollData". Other 2 "anEnableFlag" explanation, please refer to "2.4.1 EnableUser". 2.2.12 USBSetOneEnrollDataWithString The form of long USBSetOneEnrollDataWithString (long anEnrollNumber, long anBackupNumber, long anMachinePrivilege, BSTR apstrEnrollData, long anEnableFlag, LPCTSTR a nEnrollName) Function and USBSetOneEnrollData command as the registration information to the registration form of the text column. anEnrollNumber registration number anBackupNumber registration number and kinds of data anMachinePrivilege the user's operating authority apstrEnrollData directs the parameters of registration data anEnableFlag parameters permit the user's machine instructions are Parameters anEnrollName user directs the name of the parameter Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code Table. " Reading a Preview instruction, not the same as 1, similar to the command and You're PutEnrollDataWithString part of the direct connection isUnlock not only full access with a free trial. Is to use USB memory. Please refer to the instructions on the PutEnrollDataWithString "2.2.4 PutEnr Download With Free Trial ollDataWithString ". Other 2 additional help, please refer to "2.2.11 USBSetOneEnrollData". 2.2.13 USBWriteAllEnrollDataToFile The form of long USBWriteAllEnrollDataToFile (char * apstrFilePath) Features instruction by USBSetOneEnrollData or USBSetOneEnrollDataWithString PC's memory in the making In the form of registration data files. Sign up to vote on this title File name parameter apstrFilePath useful Useful Not Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code Table. "
Home
Saved
Books
Audiobooks
Magazines
News
Documents
Sheet Music
Upload
Sign In
Join
Search
Home
Saved
870 views
0
Upload
Sign In
RELATED TITLES
0
Function to change the table Uploaded by Nalaka Deshan Kariyawasam
Books
Audiobooks
Magazines
Save
Embed
Share
Print
Download
News
Documents
Sheet Music
Join
CNC Advanced Concepts
1
of 45
User Manual of 710c_SDK
ZPIO
Search document
Table. " 1 is reading the user information obtained by GetAllUserID instruction. Please refer to the instructions on the GetAllUserID "2.2.15 GetAllUserID". Other 2 users have not been registered, the instruction is to fail. - 12 2.2.15 GetAllUserID The form of long GetAllUserID (long * apnEnrollNumber, long * apnBackupNumber, long * apnMac hinePrivilege, long * apnEnableFlag) Function to read through ReadAllUserID user information, one by one to get. apnEnrollNumber directs registration number of the parameters apnBackupNumber registration number of the parameter indicates the type of information were apnMachinePrivilege the parameters of the user's operating authority directs Parameters apnEnableFlag parameters permit the user's machine parameter indicates the direction of those who Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code Table. " 1 did not read through ReadAllUserID user information, the directives fail. After 2 to get the data returned RUNERR_LOG_END. You're Reading a Preview 3 to return to the "apnMachinePrivilege" description of the operating authority, please refer to "2.4.2 ModifyPri Unlock full access with a free trial. vilege ". Other Download With Free Trial 4 "apnEnableFlag" instructions, please refer to "2.4.1 EnableUser". 2.2.16 EmptyEnrollData The form of long EmptyEnrollData (void) Function to delete all the registration information is registered. Parameters Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code Table. " to vote on this title Remove all other 1 because all the registration data, Sign the up implementation of the Useful Not useful instruction register before you back up important data. 2.2.17 ClearKeeperData The form of long ClearKeeperData (void)
Home
Saved
Books
Audiobooks
Magazines
News
Documents
Sheet Music
Upload
Sign In
Join
Search
Home
Saved
870 views
0
Upload
Sign In
RELATED TITLES
0
Function to change the table Uploaded by Nalaka Deshan Kariyawasam
Books
Audiobooks
Magazines
Save
Embed
Share
Print
Download
News
Documents
Sheet Music
Join
CNC Advanced Concepts
1
of 45
User Manual of 710c_SDK
ZPIO
Search document
Delete all feature in the landing data management authority information, the user or even for the general user. Parameters Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code Table. " Other 1 - 13 2.3 Record data management 2.3.1 LoadSuperLogData The form of long LoadSuperLogData (long anReadMark) Records management functions from the machine will read the PC's memory for analysis. Parameters anReadMark read signs Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code Table. " The data read to the other one can get through GetSuperLogData. Please refer to "2.3.3 GetSuperLogData". 2 anReadMark = 1, then attending a new Canadian record data. anReadMark = 0 read all the case records of data. 2.3.2 USBLoadSuperLogDataFromFile The form of long USBLoadSuperLogDataFromFile (char * a pstrFilePath) You're Reading a Preview USB memory management functions the machine records the data file management record data will be read in PC memory for analysis. Unlock full access with a free trial. File name parameter apstrFilePath Returns Returns 1 on success, failure to return the corresponding error code. Error Download With Free Trial code specific instructions refer to "4.2 error code Table. " 1 and LoadSuperLogData similar to the case with the PC off using the instructions for the management data. 2, the structure of the file under the incorrect instruction execution is failed. Other 3 USB to use the machine reference manual. 2.3.3 GetSuperLogData Sign up to vote on this*title The form of long GetSuperLogData (long * apnSEnrollNumber, long Useful Not useful apnGEnrollNumber, long * a pnManipulation, long * apnBackupNumber, DATE * apnDateTime) Features instruction by LoadSuperLogData or USBLoadSuperLogDataFromFile PC
Home
Saved
Books
Audiobooks
Magazines
News
Documents
Sheet Music
Upload
Sign In
Join
Search
Home
Saved
870 views
0
Upload
Sign In
RELATED TITLES
0
Function to change the table Uploaded by Nalaka Deshan Kariyawasam
Books
Audiobooks
Magazines
Save
Embed
Share
Print
Download
News
Documents
Sheet Music
Join
CNC Advanced Concepts
1
of 45
User Manual of 710c_SDK
ZPIO
Search document
Table. " Once the data for the other one back RUNERR_LOG_END. 2 first run LoadSuperLogData or USBLoadSuperLogDataFromFile instruction, or the instruction Be failed. - 14 3 "apnManipulation" as follows: 3: LOG_ENROLL_USER - the average user registration 4: LOG_ENROLL_MANAGER - Manager Registration 5: LOG_ENROLL_DELFP - delete the fingerprint data 6: LOG_ENROLL_DELPASS - delete a password 7: LOG_ENROLL_DELCARD - remove card data 8: LOG_LOG_ALLDEL - delete all the log data 9: LOG_SETUP_SYS - change machine information 10: LOG_SETUP_TIME - modify the machine time 11: LOG_SETUP_LOG - modify the record limit 12: LOG_SETUP_COMM - modify the communication 13: LOG_PASSTIME - the time set by 14: LOG_SETUP_DOOR - information setting gate operation 2.3.4 EmptySuperLogData The form of long EmptySuperLogData (void) Remove all functions from the management of the machine records data. Parameters You're Reading Preview Returns Returns 1 on success, failure to returnathe corresponding error code. Error code specific instructions referUnlock to "4.2 full error access code with a free trial. Table. " Remove all other 1 because all the management of recorded data, the implementation Download With Free Trial of the instruction register before you back up important data. 2.3.5 LoadGeneralLogData The form of long LoadGeneralLogData (long anReadMark) Function from the machine to record data read out of memory on a PC for analysis. Parameters anReadMark read signs Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code Table. " 1 to the data read by GetGeneralLogData can get. Sign up to vote on this title Useful Not useful "2.3.7 GetGeneralLogData". Other 2 anReadMark = 1 case to read the new record data
Home
Saved
Books
Audiobooks
Magazines
News
Documents
Sheet Music
Upload
Sign In
Join
Search
Home
Saved
870 views
0
Upload
Sign In
RELATED TITLES
0
Function to change the table Uploaded by Nalaka Deshan Kariyawasam
Books
Audiobooks
Magazines
Save
Embed
Share
Print
Download
News
Documents
Sheet Music
Join
CNC Advanced Concepts
1
of 45
User Manual of 710c_SDK
ZPIO
Search document
Order. 2 file structure is not correct instruction execution failed. Other 3 USB to use the machine reference manual. - 15 2.3.7 GetGeneralLogData The form of long GetGeneralLogData (long * apnEnrollNumber, long * apnVerifyMode, long * apn InOutMode, DATE * apnDateTime) Function read by LoadGeneralLogData or USBLoadGeneralLogDataFromFile PC memory access instructions Record data one by one to get. apnEnrollNumber out the parameters of the user directs the registration number apnVerifyMode sure way directs the parameters apnInOutMode parameter directs out of the way Parameters apnDateTime access to record the date, time, directs the parameters Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code Table. " 1 to obtain complete data return RUNERR_LOG_END. 2 "apnVerifyMode" as follows: 1: LOG_FPVERIFY - Fingerprint recognition You'reconfirmation Reading a Preview 2: LOG_PASSVERIFY - password 3: LOG_CARDVERIFY - cardUnlock recognition full access with a free trial. 4: LOG_FPPASS_VERIFY - fingerprint + password confirmation 5: LOG_FPCARD_VERIFY - fingerprint + card confirmation Download With Free Trial 6: LOG_PASSFP_VERIFY - Password + Fingerprint recognition 7: LOG_CARDFP_VERIFY - card + fingerprint recognition Version of controlled lock function in use. (See "2.7 doorbell Management") 10: LOG_OPEN_DOOR - confirmation signals sent to open the door 11: LOG_CLOSE_DOOR - confirmation signals sent close 12: LOG_OPEN_HAND - through the open door button sends signal 13: LOG_OPEN_THREAT - Anti-fingerprint recognition, threatened to send the signal to open the door up to vote on title 14: LOG_PROG_OPEN - opening signal sent from Sign the operation ofthis machinery Useful Not 15: LOG_PROG_CLOSE - send a close signal fromthe operation ofuseful machinery 16: LOG_OPEN_IREGAL - send a signal to open the door of illicit sex 17: LOG_CLOSE_IREGAL - send a signal to close the illegal nature of
Home
Saved
Books
Audiobooks
Magazines
News
Documents
Sheet Music
Upload
Sign In
Join
Search
Home
Saved
870 views
0
Upload
Sign In
RELATED TITLES
0
Function to change the table Uploaded by Nalaka Deshan Kariyawasam
Books
Audiobooks
Magazines
Save
Embed
Share
Print
Download
News
Documents
Sheet Music
Join
CNC Advanced Concepts
1
of 45
User Manual of 710c_SDK
ZPIO
Search document
The form of long EmptyGeneralLogData (void) Function to delete all records of data access. Parameters Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code Table. " - 16 1 because all other entry and exit records to delete all data, the implementation of the instruction register before you back up important data out of Record data. 2.3.9 2.3.10 GetGeneralLogData_1 Form GetGeneralLogData_1 (long * apnEnrollNumber, long pnVerifyMode, long * apnInOu tMode, long * apnYear, long * apnMonth, long * apnDay, long * apnHour, long * apnMinute, long * apnSec) Function read by LoadGeneralLogData or USBLoadGeneralLogDataFromFile PC memory access instructions Record data one by one to get. apnEnrollNumber out the parameters of the user directs the registration number apnVerifyMode sure way directs the parameters apnInOutMode parameter directs out of the way Parameters You're Reading a Preview apnYear, apnMonth apnDay, apnHour Unlock full access with a free trial. apnMinute, apnSec Access to record the date, time, directs the parameters Download With Free Trial Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code Table. " 1 to obtain complete data return RUNERR_LOG_END. 2 "apnVerifyMode" as follows: 1: LOG_FPVERIFY - Fingerprint recognition 2: LOG_PASSVERIFY - password confirmation 3: LOG_CARDVERIFY - card recognition up to vote on this title 4: LOG_FPPASS_VERIFY - fingerprint + passwordSign confirmation Useful Not useful 5: LOG_FPCARD_VERIFY - fingerprint + card confirmation 6: LOG_PASSFP_VERIFY - Password + Fingerprint recognition 7: LOG_CARDFP_VERIFY - card + fingerprint recognition
Home
Saved
Books
Audiobooks
Magazines
News
Documents
Sheet Music
Upload
Sign In
Join
Search
Home
Saved
870 views
0
Upload
Sign In
RELATED TITLES
0
Function to change the table Uploaded by Nalaka Deshan Kariyawasam
Books
Audiobooks
Magazines
Save
Embed
Share
Print
Download
News
Documents
Sheet Music
Join
CNC Advanced Concepts
1
of 45
User Manual of 710c_SDK
ZPIO
Search document
19: LOG_CLOSE_COVER - off the machine casing 3, first with LoadGeneralLogData or USBLoadGeneralLogDataFromFile instruction, or the means That is failure. Other 4 "apnInOutMode" as follows: 0: LOG_IOMODE_IN - into the way of confirmation 1: LOG_IOMODE_OUT - a sure way 2: LOG_IOMODE_IO - generally is recognized - 17 2.3.11 2.3.12 GetSuperLogData_1 The form of long GetSuperLogData (long * apnSEnrollNumber, long * apnGEnrollNumber, long * ApnManipulation, long * apnBackupNumber, long * apnYear, long * apnMonth, long * apnDay, long * apnHour, long * apnMinute, long * apnSec) Features instruction by LoadSuperLogData or USBLoadSuperLogDataFromFile read PC memory management Records one by one to get. apnSEnrollNumber manager directs the registration number of the parameters apnGEnrollNumber is the registration number of the parameter manager directs apnManipulation managed object identification number of the parameter directs apnBackupNumber kind of information by managers of the registration number of the You're Reading a Preview parameter directs Parameters Unlock full access with a free trial. apnYear, apnMonth apnDay, apnHour Download With Free Trial apnMinute, apnSec Access to record the date, time, directs the parameters Successful return of a form of implementation, failure to return the corresponding error code. Error code specifically refer to "4.2 error code Table. " 1 to obtain complete data return RUNERR_LOG_END. 2 first run LoadSuperLogData or USBLoadSuperLogDataFromFile instruction, or the Instruction is failed. Sign up to vote on this title Other Useful Not useful 3 "apnManipulation" as follows: 3: LOG_ENROLL_USER - the average user registration 4: LOG_ENROLL_MANAGER - Manager Registration
Home
Saved
Books
Audiobooks
Magazines
News
Documents
Sheet Music
Upload
Sign In
Join
Search
Home
Saved
870 views
0
Upload
Sign In
RELATED TITLES
0
Function to change the table Uploaded by Nalaka Deshan Kariyawasam
Books
Audiobooks
Magazines
Save
Embed
Share
Print
Download
News
Documents
Sheet Music
Join
CNC Advanced Concepts
1
of 45
User Manual of 710c_SDK
ZPIO
Search document
2.4 User Information Management 2.4.1 EnableUser The form of long EnableUser (long anEnrollNumber, long anBackupNumber, long anEnableFlag) Set user on the machine function available / unavailable. anEnrollNumber registration number anBackupNumber registration number and kinds of data Parameters anEnableFlag license logo Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code Table. " Other 1 anEnableFlag = 0 that is not available, anEnableFlag = 1 that is available. 2.4.2 ModifyPrivilege The form of long ModifyPrivilege (long anEnrollNumber, long anBackupNumber, long anMachin ePrivilege) Feature set the user's authority to operate the machine. anEnrollNumber registration number anBackupNumber registration number and kinds of data Parameters anMachinePrivilege operating authority You're Reading Preview Returns Returns 1 on success, failure to returnathe corresponding error code. Error code specific instructions referUnlock to "4.2 full error access code with a free trial. Table. " 1 other user to operate the machine in accordance with the permissions can be divided Download With Free Trial into general user and administrator. Permissions are reflected in the "anMachinePri vilege "on. "AnMachinePrivilege" as follows: 0: MP_NONE - the average user (can only be confirmed on the machine the user) 1: MP_ALL - managers. (The user can operate the machine) 2.4.3 GetUserName The form of long GetUserName (long anEnrollNumber, char * apstrUserName) Function to get assigned to the user's name. Parameters anEnrollNumber registration number Sign up to vote on this title Useful Not useful indicates apstrUserName who kept the name of the parameter Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code
Home
Saved
Books
Audiobooks
Magazines
News
Documents
Sheet Music
Upload
Sign In
Join
Search
Home
Saved
870 views
0
Upload
Sign In
RELATED TITLES
0
Function to change the table Uploaded by Nalaka Deshan Kariyawasam
Books
Audiobooks
Magazines
Save
Embed
Share
Print
Download
News
Documents
Sheet Music
Join
CNC Advanced Concepts
1
of 45
User Manual of 710c_SDK
ZPIO
Search document
code specific instructions refer to "4.2 error code Table. " 1 "apstrUserName" in the name of the largest size of 10byte (up to 10 letters or up to five other Text). Other 2, the user is not assigned the case of the directive is to fail. 2.4.5 GetNewsMessage The form of long GetNewsMessage (long anNewsId, char * apstrNews) Function from the machine to get notification of text specified. Parameters anNewsId informed the identification number apstrNews informed the parameter directs the data Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code Table. " Other 1 "anNewsId" is the text of the specified number of notification, the range of '0 to 255. 2 "apstrUserName" in the name of the largest size is 48byte (up to 48 letters, most other More than 24 with the text). 2.4.6 SetNewsMessage The form of long SetNewsMessage (long anNewsId, char * apstrNews) Notice the text on the machine set function. Reading a Preview Parameters anNewsId informedYou're the identification number apstrNews informed the parameter the data Unlockdirects full access with a free trial. Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code Download With Free Trial Table. " 1, specifically refer to other "2.4.5 GetNewsMessage". 2.4.7 GetUserNewsID The form of long GetUserNewsID (long anEnrollNumber, long * apnNewsId) Function to get the text to the user assigned identification number of the notice. Parameters anEnrollNumber registration number apnNewsId directs identification number 의 parameters Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code Sign up to vote on this title Useful Not useful Table. " Other 1 "apnNewsId" in "2.4.6 SetNewsMessage" setting. 2.4.8 SetUserNewsID
Home
Saved
Books
Audiobooks
Magazines
News
Documents
Sheet Music
Upload
Sign In
Join
Search
Home
Saved
870 views
0
Upload
Sign In
RELATED TITLES
0
Function to change the table Uploaded by Nalaka Deshan Kariyawasam
Books
Audiobooks
Magazines
Save
Embed
Share
Print
Download
News
Documents
Sheet Music
Join
CNC Advanced Concepts
1
of 45
User Manual of 710c_SDK
ZPIO
Search document
The form of long EnableDevice (long anEnabledFlag) Feature set of machines available / not available. Parameters anEnabledFlag permission flag Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code Table. " 1 other communication with the PC and the machine stops when the use of machine operation. 2 anEnabledFlag = 0, that stop the show "work" notice the text. AnEnabledFlag = 1, that Allow machine operation, showed normal interface. 2.5.2 PowerOnAllDevice Form void PowerOnAllDevice (void) Function starts the connection machine. Parameters Return no The other one RS-485 communication instructions when using. 2.5.3 PowerOffDevice The form of long PowerOffDevice (void) Switch off the machine functions. Parameters Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code You're Reading a Preview Table. " 1 implementation of the Directive other words, machine is disconnected off the Unlock full access withthe a free trial. power. 2.5.4 GetDeviceTime Download With Free Trial The form of long GetDeviceTime (DATE * apnDateTime) Function to get the machine date and time. Parameters apnDateTime date, time, directs the parameters Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code Table. " Other 1 2.5.5 SetDeviceTime Sign up to vote on this title The form of long SetDeviceTime (DATE anDateTime) Useful Not useful Feature set the machine date and time. Parameters apnDateTime date, time, Returns Returns 1 on success, failure to return the corresponding error code. Error
Home
Saved
Books
Audiobooks
Magazines
News
Documents
Sheet Music
Upload
Sign In
Join
Search
Home
Saved
870 views
0
Upload
Sign In
RELATED TITLES
0
Function to change the table Uploaded by Nalaka Deshan Kariyawasam
Books
Audiobooks
Magazines
Save
Embed
Share
Print
Download
News
Documents
Sheet Music
Join
CNC Advanced Concepts
1
of 45
User Manual of 710c_SDK
ZPIO
Search document
Table. " The other one is the role of instruction in the PC, to understand the role of the state of the machine. 2 "anStatusIndex" as follows: 1: GET_MANAGERS - existing in the number of managers 2: GET_USERS - the existing number of users in general 3: GET_FPS - existing in the number of fingerprint data 4: GET_PSWS - the existing data on the number of password 5: GET_SLOGS - the new management of existing records in the number of data 6: GET_GLOGS - new and out of the existing record in the number of data 7: GET_ASLOGS - the management of all existing records in the number of data 8: GET_AGLOGS - out of all the existing records in the number of data 9: GET_CARDS - the existing data on the number of cards 2.5.7 GetDeviceInfo The form of long GetDeviceInfo (long anInfoIndex, long * apnValue) Features for machine information. Machine identification number information parameters anInfoIndex apnValue directs the parameters of information value Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code Table. " Other 1 "anInfoIndex" as follows: 1: DI_MANAGERS - Register up to the number of managers You're Reading a Preview 2: DI_MACHINENUM - Machine No. 3: DI_LANGAUGE - the language displayed the machine Unlockto fullbe access with a freeon trial. 4: DI_POWEROFF_TIME-custom power off 5: DI_LOCK_CTRL - locks operation flag Download With Free Trial 6: DI_GLOG_WARNING - maximum number of records out When will the registration records of the numerical value smaller than the word alarm
7: DI_SLOG_WARNING - maximum number of records management, When will the registration records of the numerical value smaller than the word alarm 8: DI_VERIFY_INTERVALS-time can be cut off repeatedly confirmed. Repeated confirmation of the time when the record is not left behind. Sign up to avote on this 9: DI_RSCOM_BPS - Serial communication baud rate. Not baud ratetitle values are as Useful Not useful follows. BPS_9600 = 3 BPS_19200 = 4
Home
Saved
Books
Audiobooks
Magazines
News
Documents
Sheet Music
Upload
Sign In
Join
Search
Home
Saved
870 views
0
Upload
Sign In
RELATED TITLES
0
Function to change the table Uploaded by Nalaka Deshan Kariyawasam
Books
Audiobooks
Magazines
Save
Embed
Share
Print
Download
News
Documents
Sheet Music
Join
CNC Advanced Concepts
1
of 45
User Manual of 710c_SDK
ZPIO
Search document
The form of long SetDeviceInfo (long anInfoIndex, long anValue) Feature set the machine information. Machine identification number information parameters anInfoIndex apnValue information value Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code Table. " Other 1 "anInfoIndex" with the specific value of "2.5.7 GetDeviceInfo" the same. 2.5.9 GetProductData The form of long GetProductData (long anProductIndex, char * apstrProductData) Function for the seller stated the sales information. Parameter identification number anProductIndex sales information apstrProductData parameter directs sales information Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code Table. " Other 1 "anProductIndex" as follows: 1: PRODUCT_SERIALNUMBER - serial number 2: PRODUCT_BACKUPNUMBER - booking numbers 3: PRODUCT_CODE - version 4: PRODUCT_NAME - version name 5: PRODUCT_WEB - the website seller 6: PRODUCT_DATE - Sale Date You're Reading a Preview 7: PRODUCT_SENDTO - name of the Purchaser 2.5.10 GetDeviceVersion Unlock full access with a free trial. The form of long GetDeviceVersion (long * apnVersion) Features for each model for each type responses on the updated version. Download With Free Trial Parameter version of the parameter directs apnVersion Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code Table. " Other 1 2.5.11 GetDeviceTime_1 The form of long GetDeviceTime_1 (long * apnYear, long * apnMonth, long * apnDay, long * a Sign up to vote on this title pnHour, long * apnMinute, long * apnSec, long * apnDayOfWeek) Useful Not useful - 23 Function to get the machine date and time. Parameters apnYear, apnMonth
Home
Saved
Books
Audiobooks
Magazines
News
Documents
Sheet Music
Upload
Sign In
Join
Search
Home
Saved
870 views
0
Upload
Sign In
RELATED TITLES
0
Function to change the table Uploaded by Nalaka Deshan Kariyawasam
Books
Audiobooks
Magazines
Save
Embed
Share
Print
Download
News
Documents
Sheet Music
Join
CNC Advanced Concepts
1
of 45
User Manual of 710c_SDK
ZPIO
Search document
Minute, long anSec, long anDayOfWeek) Feature set the machine date and time. Parameters anYear, anMonth anDay, anHour, anMinute, anSec, anDayOfWeek Date, time, Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code Table. " Other 1 - 24 2.6 Ring Management 2.6.1 GetBellTime The form of long GetBellTime (long * apnBellCount, long * aptBellInfo) Function for ring settings. The number of parameters parameters apnBellCount directs Bell aptBellInfo ring parameter information structure directs Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code Table. " Other 1 a loud ringing the number back to "apnBellCount". 2 is the number of rings set, set the time, information on the ring to return to the You're Reading a Preview "aptBellInfo". "AptBellInfo" instructions, please refer to "4.1.1 Unlock full access with a BELLINFO". free trial. 2.6.2 GetBellTimeWithString The form of long GetBellTimeWithString (long * apnBellCount, char * apstrBellInfo Download With Free Trial Function and GetBellTime command as a text column in the form of rings to get the information. Parameters apnBellCount ring directs the number of parameters apstrBellInfo ringing message text directs the parameters listed Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code Table. " 1, specifically refer to other "2.6.1 GetBellTime". Sign up to vote on this title Useful Not useful 2.6.3 SetBellTime The form of long SetBellTime (long anBellCount, long * aptBellInfo) Feature set on the machine ring information.
Home
Saved
Books
Audiobooks
Magazines
News
Documents
Sheet Music
Upload
Sign In
Join
Search
Home
Saved
870 views
0
Upload
Sign In
RELATED TITLES
0
Function to change the table Uploaded by Nalaka Deshan Kariyawasam
Books
Audiobooks
Magazines
Save
Embed
Share
Print
Download
News
Documents
Sheet Music
Join
CNC Advanced Concepts
1
of 45
User Manual of 710c_SDK
ZPIO
Search document
The same function and SetBellTime instruction, will ring out in the form of information in text settings. The number of parameters anBellCount ring apstrBellInfo ring parameter information structure directs Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code Table. " 1, specifically refer to other "2.6.3 SetBellTime". - 25 2.7 doorbell Management This feature is not all versions have the. 2.7.1 GetDoorStatus The form of long GetDoorStatus (long * apnStatusVal) Function for open state. Parameter apnStatusVal directs state values of the parameters Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code Table. " Other 1 "apnStatusVal": as follows: 0: DOOR_CONTROLRESET - door control state machine. 1: DOOR_OPEND - door is open. 2: DOOR_CLOSED - the door is closed. 3: DOOR_COMMNAD-control instructions in accordance with the door, the door You'reofReading Preview opened automatically after a period time to aclose. 2.7.2 SetDoorStatus Unlock full access with a free trial. The form of long SetDoorStatus (long anStatusVal) Functional operation of door status. Download With Free Trial State value parameter anStatusVal Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code Table. " Other 1 "anStatusVal" Help, please refer to "2.7.1 GetDoorStatus". 2.7.3 GetPassTime The form of long GetPassTime (long anPassTimeID, long * apnPassTime, long anPassTimeSize) Sign to vote on this(TimeZone). title Function for the time period to open the door to close theupinformation Useful Not useful anPassTimeID time information identification number apnPassTime time parameters of the information structure directs Parameters
Home
Saved
Books
Audiobooks
Magazines
News
Documents
Sheet Music
Upload
Sign In
Join
Search
Home
Saved
870 views
0
Upload
Sign In
RELATED TITLES
0
Function to change the table Uploaded by Nalaka Deshan Kariyawasam
Books
Audiobooks
Magazines
Save
Embed
Share
Print
Download
News
Documents
Sheet Music
Join
CNC Advanced Concepts
1
of 45
User Manual of 710c_SDK
ZPIO
Search document
Other 3 "anPassTimeSize" is "apnPassTime" the length of the structure to determine the length of API is not enough Enough to be provided. 2.7.4 GetPassTimeWithString The form of long GetPassTimeWithString (long anPassTimeID, char * apstrPassTime) - 26 Function and GetPassTime same time returns the information to the text column. Parameter identification number anPassTimeID time information apnPassTime time information on the text column structure directs the parameters of the form Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code Table. " 1, specifically refer to other "2.7.3 GetPassTime". 2.7.5 SetPassTime The form of long SetPassTime (long anPassTimeID, long * apnPassTime, long anPassTimeSize) Feature set to open the door closing time information (TimeZone). anPassTimeID time information identification number apnPassTime time parameters of the information structure directs Parameters You're a Preview anPassTimeSize time the length of theReading information structure Returns Returns 1 on success, Unlock failurefulltoaccess return corresponding error code. Error withthe a free trial. code specific instructions refer to "4.2 error code Table. " Download With Free Trial 1, specifically refer to other "2.7.3 GetPassTime". 2.7.6 SetPassTimeWithString The form of long SetPassTimeWithString (long anPassTimeID, char * apstrPassTime Function and SetPassTime same time information is entered in the text column. Parameter identification number anPassTimeID time information apnPassTime time information on the parameters of the column structure directs the text Sign up to vote on this title Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code Useful Not useful Table. " 1, specifically refer to other "2.7.3 GetPassTime".
Home
Saved
Books
Audiobooks
Magazines
News
Documents
Sheet Music
Upload
Sign In
Join
Search
Home
Saved
870 views
0
Upload
Sign In
RELATED TITLES
0
Function to change the table Uploaded by Nalaka Deshan Kariyawasam
Books
Audiobooks
Magazines
Save
Embed
Share
Print
Download
News
Documents
Sheet Music
Join
CNC Advanced Concepts
1
of 45
User Manual of 710c_SDK
ZPIO
Search document
anPassTimeIDSize identification number length of structure Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code Table. " 1 "apnGroupID" instructions, please refer to "2.7.11 GetGroupPassTime". 2 "apnPassTimeID" is assigned to the user identification number for all time the arrangement of the information-based composite structure Body. Structure definitions refer to "4.1.3 USERPASSINFO structure." Identification number of the explanation Refer to "2.7.3 GetPassTime". Other 3 "anPassTimeSize" is "apnPassTime" in length, is provided in the API the length of the structure Enough. - 27 2.7.8 GetUserPassTimeWithString The form of long GetUserPassTimeWithString (long anEnrollNumber, long * apnGroupID, char * apstrPassTimeID) The same function and GetUserPassTime command will identify the number of structures returned as a text column. anEnrollNumber registration number apnGroupID directs the parameter combination number You're Reading a Preview Parameters apstrPassTimeID time text message identification number Unlock full access with a free trial. column structure directs the parameters Returns Returns 1 on success, failure to return the corresponding error code. Error Download With Free Trial code specific instructions refer to "4.2 error code Table. " 1, specifically refer to other "2.7.7 GetUserPassTime". 2.7.9 SetUserPassTime The form of long SetUserPassTime (long anEnrollNumber, long anGroupID, long * apnPassTimeI D, long anPassTimeIDSize) Functional information to the user set period of time combined with the time allocated Sign up to vote on this title to each message. Useful Not useful anEnrollNumber registration number anGroupID combination of numbers apnPassTimeID time information on the parameters identification number structure
Home
Saved
Books
Audiobooks
Magazines
News
Documents
Sheet Music
Upload
Sign In
Join
Search
Home
Saved
870 views
0
Upload
Sign In
RELATED TITLES
0
Function to change the table Uploaded by Nalaka Deshan Kariyawasam
Books
Audiobooks
Magazines
Save
Embed
Share
Print
Download
News
Documents
Sheet Music
Join
CNC Advanced Concepts
1
of 45
User Manual of 710c_SDK
ZPIO
Search document
The same function and SetUserPassTime instruction, structure identification number will be listed in the form of text input. anEnrollNumber registration number anGroupID combination of numbers Parameters apstrPassTimeID time text message identification number column structure directs the parameters Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code Table. " 1, specifically refer to other "2.7.7 GetUserPassTime". 2.7.11 GetGroupPassTime The form of long GetGroupPassTime (long anGroupID, long * apnPassTimeID, long anPassTimeID Size) Function to obtain the information portfolio in time period information for each identification number. anGroupID combination of numbers apnPassTimeID time information on the parameters identification number structure directs Parameters anPassTimeIDSize identification number length of structure Returns Returns 1 on success, failure to return the corresponding error code. Error a Preview code specific instructions referYou're to "4.2Reading error code Table. " Unlock full access with a free trial. The other one in the machine several time information will be combined and then combined structure can be used, "anGroupID" is Download With Free Trial Means that the combinations of numbers. 5 combination can be set up, the value is '1 '~ '5'. - 28 2 "apnPassTimeID" is assigned to each combination of the time the information identification number of the order type composite structures Body, a combination where you can set three structure identification number, the structure of the definition of reference to "4.1.4 GRO UPPASSINFO structure ", identification number, instructions, please refer to"2.7.3 Sign up to vote on this title GetPassTime ". Useful Not useful 3 "anPassTimeIDSize" is "apnPassTimeID" the length of the structure to determine the length of API Enough.
Home
Saved
Books
Audiobooks
Magazines
News
Documents
Sheet Music
Upload
Sign In
Join
Search
Home
Saved
870 views
0
Upload
Sign In
RELATED TITLES
0
Function to change the table Uploaded by Nalaka Deshan Kariyawasam
Books
Audiobooks
Magazines
Save
Embed
Share
Print
Download
News
Documents
Sheet Music
Join
CNC Advanced Concepts
1
of 45
User Manual of 710c_SDK
ZPIO
Search document
1, specifically refer to other "2.7.11 GetGroupPassTime". 2.7.13 SetGroupPassTime The form of long SetGroupPassTime (long anGroupID, long * a pnPassTimeID, long anPassTimeID Size) Feature set time period on the mix of information, identification number. anGroupID combination of numbers apnPassTimeID time information on the parameters identification number structure directs Parameters anPassTimeIDSize identification number length of structure Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code Table. " 1, specifically refer to other "2.7.11 GetGroupPassTime". 2.7.14 SetGroupPassTimeWithString The form of long SetGroupPassTimeWithString (long anGroupID, char * apstrPassTimeID) The same function and SetGroupPassTime command will identify the number of columns of text input structure. No combination of parameters anGroupID apstrPassTimeID time text message identification number column structure directs the parameters You're Reading Preview Returns Returns 1 on success, failure to returnathe corresponding error code. Error code specific instructions referUnlock to "4.2 full error access code with a free trial. Table. " 1, specifically refer to other "2.7.11 GetGroupPassTime". Download With Free Trial 2.7.15 GetGroupMatch The form of long GetGroupMatch (long * apnGroupMatch, long anGroupMatchSize) Function to get time information structure of the portfolio composition door operation Combination of parameters apnGroupMatch combination directs the parameters of structure anGroupMatchSize combination of the length of structure Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code Sign up to vote on this title Useful Not useful Table. " - 29 1 time a combination of organizational structure information for later use in the open
Home
Saved
Books
Audiobooks
Magazines
News
Documents
Sheet Music
Upload
Sign In
Join
Search
Home
Saved
870 views
0
Upload
Sign In
RELATED TITLES
0
Function to change the table Uploaded by Nalaka Deshan Kariyawasam
Books
Audiobooks
Magazines
Save
Embed
Share
Print
Download
News
Documents
Sheet Music
Join
CNC Advanced Concepts
1
of 45
User Manual of 710c_SDK
ZPIO
Search document
2.7.16 GetGroupMatchWithString The form of long GetGroupMatchWithString (char * apstrGroupMatch) The same function and GetGroupMatchTime instruction. The portfolio structure and returns a text column. Combination of parameter combinations apstrGroupMatch text column structure directs the parameters Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code Table. " 1, specifically refer to other "2.7.15 GetGroupMatch". 2.7.17 SetGroupMatch The form of long SetGroupMatch (long * apnGroupMatch, long anGroupMatchSize) Feature set period of time the information structure of the combination of gates combination. Combination of parameters apnGroupMatch combination directs the parameters of structure anGroupMatchSize composite structure length. Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code Table. " 1, specifically refer to other "2.7.15 GetGroupMatch". 2.7.18 SetGroupMatchWithString The form of long SetGroupMatchWithString (char * apstrGroupMatch) You're Reading a Preview The same function and SetGroupMatch instruction will be combined structure to text columns registration. Unlock full access with a free trial. Combination of parameter combinations apstrGroupMatch text column structure directs the parameters Download With Free Trial Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code Table. " 1, specifically refer to other "2.7.15 GetGroupMatch". 2.8 summer-time management This feature is not all versions have the. 2.8.1 GetAdjustInfo The form of long GetAdjustInfo (long * dwAdjustedState, long * dwAdjustedMonth, Sign up to vote on this title long * dwAdj Not * useful Useful long ustedDay, long * dwAdjustedHour, long * dwAdjustedMinute, dwRestoredSta e, long * dwRestoredMonth, long * dwRestoredDay, long * dwRestoredHour, long *
Home
Saved
Books
Audiobooks
Magazines
News
Documents
Sheet Music
Upload
Sign In
Join
Search
Home
Saved
870 views
0
Upload
Sign In
RELATED TITLES
0
Function to change the table Uploaded by Nalaka Deshan Kariyawasam
Books
Audiobooks
Magazines
Save
Embed
Share
Print
Download
News
Documents
Sheet Music
Join
CNC Advanced Concepts
1
of 45
User Manual of 710c_SDK
ZPIO
Search document
+1: One hour later. 2.8.2 SetAdjustInfo The form of long SetAdjustInfo (long dwAdjustedState, long dwAdjustedMonth, long dwAdjust edDay, long dwAdjustedHour, long dwAdjustedMinute, long dwRestoredState, lon g dwRestoredMonth, long dwRestoredDay, long dwRestoredHour, long dwRestoredM inute) Functional operation of the summer-time status. Parameter status values (see 4.1.6 structure) Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code Table. " Other 1 "dwAdjustedState, dwRestoredState": as follows: None: No change. -1: One hour earlier. +1: One hour later. - 31 3 FKAttend.DLL interface FKAttend.DLL interface and FKAttend.OCX similar. For a variety of connections, the return for the first time communication interface identification number, and other interface is also used to achieve the identification number You're Preview Communication with the machine, theReading functiona and FKAttend.OCX not the same. The following explains the functions and differences between the corresponding Unlock full access with a free trial. points. 3.1 connect and disconnect the machine Download With Free Trial 3.1.1 FK_ConnectComm The form of long FK_ConnectComm (long nMachineNo, long nComPort, long nBaudRate, char * ps trTelNumber, long nWaitDialTime, long nLicense) Function through the RS-232/485 cable connected to the machine to open COM interface. Back to execute successfully, returns the interface identification number. The value should be a value greater than 0 up to vote on this title If the failure to return the corresponding error code. Sign A specific reference to the error Useful Not useful code "4.2 error code table." 1, specifically refer to other "2.1.1 ConnectComm". 3.1.2 FK_ConnectNet
Home
Saved
Books
Audiobooks
Magazines
News
Documents
Sheet Music
Upload
Sign In
Join
Search
Home
Saved
870 views
0
Upload
Sign In
RELATED TITLES
0
Function to change the table Uploaded by Nalaka Deshan Kariyawasam
Books
Audiobooks
Magazines
Save
Embed
Share
Print
Download
News
Documents
Sheet Music
Join
CNC Advanced Concepts
1
of 45
User Manual of 710c_SDK
ZPIO
Search document
The form of long FK_ConnectUSB (long nMachineNo, long nLicense) Functions through the USB cable to open the USB communication interface. Back to execute successfully, returns the interface identification number. The value should be a value greater than 0 If the failure to return the corresponding error code. A specific reference to the error code "4.2 error code table." 1, specifically refer to other "2.1.3 ConnectUSB". 3.1.4 FK_DisConnect Form void FK_DisConnect (long nHandleIndex) Function disconnect the connection with the machine. 1 "nHandleIndex" is to be returned by FK_ConnectComm or communications access FK_ConnectNet Port identification number. Other 2 specifically refer to "2.1.4 DisConnect". 3.1.5 - 32 3.1.6 FK_ConnectGetIP The form of long ConnectGetIP (BSTR * strComName) Features to generate IP address of the function name Find IP address parameter strComName be the name of the machine Other 1 "nLicense" is "2.1.1 ConnectComm" and the same. 3.2 Registration data management You're Reading a Preview 3.2.1 FK_GetEnrollData The form of long FK_GetEnrollData (long Unlock full accessnHandleIndex, with a free trial. long nEnrollNumber, long nBackupNum ber, long * pnMachinePrivilege, void * pnEnrollData, long * pnPassWord) Download With Free Trial Function to obtain the user's operating authority and registration information. 1 "nHandleIndex" is to be returned by FK_ConnectComm or communications access FK_ConnectNet Port identification number. Other 2 specifically refer to "2.2.1 GetEnrollData". 3.2.2 FK_GetEnrollDataWithString The form of long FK_GetEnrollDataWithString (long nHandleIndex, long Sign up to vote on this title nEnrollNumber, long Useful Not useful nBackupNumber, long * pnMachinePrivilege, LPSTR * apstrEnrollData) As test function and FK_GetEnrollData instructions, registration form to get information to the text column.
Home
Saved
Books
Audiobooks
Magazines
News
Documents
Sheet Music
Upload
Sign In
Join
Search
Home
Saved
870 views
0
Sign In
Upload
RELATED TITLES
0
Function to change the table Uploaded by Nalaka Deshan Kariyawasam
Books
Audiobooks
Magazines
Save
Embed
Share
Print
Download
News
Documents
Sheet Music
Join
CNC Advanced Concepts
1
of 45
User Manual of 710c_SDK
ZPIO
Search document
1 "nHandleIndex" is to be returned by FK_ConnectComm or communications access FK_ConnectNet Port identification number. Other 2 specifically refer to "2.2.3 PutEnrollData". 3.2.4 FK_PutEnrollDataWithString The form of long FK_PutEnrollDataWithString (long nHandleIndex, long nEnrollNumber, long nBackupNumber, long nMachinePrivilege, char * apstrEnrollData) Function and FK_PutEnrollData command similar to the registration information will be recorded in the form of text columns.
Other
Other
You're Reading a Preview Unlock full access with a free trial.
Download With Free Trial Remove the specified function from the registration data.
Other
Sign up to vote on this title
Other
Useful
Not useful
Home
Saved
Books
Audiobooks
Magazines
News
Documents
Sheet Music
Upload
Sign In
Join
Search
Home
Saved
870 views
0
Sign In
Upload
RELATED TITLES
0
Function to change the table Uploaded by Nalaka Deshan Kariyawasam
Books
Audiobooks
Magazines
Save
Embed
Share
Print
Download
News
Documents
Sheet Music
Join
CNC Advanced Concepts
1
of 45
User Manual of 710c_SDK
ZPIO
Search document
Other
Other
Of.
Other
You're Reading a Preview Unlock full access with a free trial.
Download With Free Trial
Other Sign up to vote on this title
Useful
Not useful
Home
Saved
Books
Audiobooks
Magazines
News
Documents
Sheet Music
Upload
Sign In
Join
Search
Home
Saved
870 views
0
Sign In
Upload
RELATED TITLES
0
Function to change the table Uploaded by Nalaka Deshan Kariyawasam
Books
Audiobooks
Magazines
Save
Embed
Share
Print
Download
News
Documents
Sheet Music
Join
CNC Advanced Concepts
1
of 45
User Manual of 710c_SDK
ZPIO
Search document
Other
Other
Other You're Reading a Preview Unlock full access with a free trial.
Other
Download With Free Trial
Sign up to vote on this title
Other
Useful
Not useful
Home
Saved
Books
Audiobooks
Magazines
News
Documents
Sheet Music
Upload
Sign In
Join
Search
Home
Saved
870 views
0
Sign In
Upload
RELATED TITLES
0
Function to change the table Uploaded by Nalaka Deshan Kariyawasam
Books
Audiobooks
Magazines
Save
Embed
Share
Print
Download
News
Documents
Sheet Music
Join
CNC Advanced Concepts
1
of 45
User Manual of 710c_SDK
ZPIO
Search document
Other
Other
Other
You're Reading a Preview Unlock full access with a free trial.
Other
Other
Download With Free Trial
Sign up to vote on this title
Useful
Not useful
Home
Saved
Books
Audiobooks
Magazines
News
Documents
Sheet Music
Upload
Sign In
Join
Search
Home
Saved
870 views
0
Sign In
Upload
RELATED TITLES
0
Function to change the table Uploaded by Nalaka Deshan Kariyawasam
Books
Audiobooks
Magazines
Save
Embed
Share
Print
Download
News
Documents
Sheet Music
Join
CNC Advanced Concepts
1
of 45
User Manual of 710c_SDK
ZPIO
Search document
Other
Other
You're Reading a Preview
Other
Unlock full access with a free trial.
Download With Free Trial
Other Sign up to vote on this title
Useful
Not useful
Home
Saved
Books
Audiobooks
Magazines
News
Documents
Sheet Music
Upload
Sign In
Join
Search
Home
Saved
870 views
0
Sign In
Upload
RELATED TITLES
0
Function to change the table Uploaded by Nalaka Deshan Kariyawasam
Books
Audiobooks
Magazines
Save
Embed
Share
Print
Download
News
Documents
Sheet Music
Join
CNC Advanced Concepts
1
of 45
User Manual of 710c_SDK
ZPIO
Search document
Other
Other
Other You're Reading a Preview Unlock full access with a free trial.
Download With Free Trial
Other
Sign up to vote on this title
Other
Useful
Not useful
Home
Saved
Books
Audiobooks
Magazines
News
Documents
Sheet Music
Upload
Sign In
Join
Search
Home
Saved
870 views
0
Sign In
Upload
RELATED TITLES
0
Function to change the table Uploaded by Nalaka Deshan Kariyawasam
Books
Audiobooks
Magazines
Save
Embed
Share
Print
Download
News
Documents
Sheet Music
Join
CNC Advanced Concepts
1
of 45
User Manual of 710c_SDK
ZPIO
Search document
Other
Other
Other
Other
You're Reading a Preview Unlock full access with a free trial.
Download With Free Trial
Other
Sign up to vote on this title
Other
Useful
Not useful
Home
Saved
Books
Audiobooks
Magazines
News
Documents
Sheet Music
Upload
Sign In
Join
Search
Home
Saved
870 views
0
Sign In
Upload
RELATED TITLES
0
Function to change the table Uploaded by Nalaka Deshan Kariyawasam
Books
Audiobooks
Magazines
Save
Embed
Share
Print
Download
News
Documents
Sheet Music
Join
CNC Advanced Concepts
1
of 45
User Manual of 710c_SDK
ZPIO
Search document
Other
Other
Other
You're Reading a Preview Unlock full access with a free trial.
Other
Other
Download With Free Trial
Sign up to vote on this title
Useful
Not useful
Home
Saved
Books
Audiobooks
Magazines
News
Documents
Sheet Music
Upload
Sign In
Join
Search
Home
Saved
870 views
0
Sign In
Upload
RELATED TITLES
0
Function to change the table Uploaded by Nalaka Deshan Kariyawasam
Books
Audiobooks
Magazines
Save
Embed
Share
Print
Download
News
Documents
Sheet Music
Join
CNC Advanced Concepts
1
of 45
User Manual of 710c_SDK
ZPIO
Search document
Other
Other
Other
You're Reading a Preview
Other
Unlock full access with a free trial.
Download With Free Trial
Sign up to vote on this title
Useful
Not useful
Home
Saved
Books
Audiobooks
Magazines
News
Documents
Sheet Music
Upload
Sign In
Join
Search
Home
Saved
870 views
0
Sign In
Upload
RELATED TITLES
0
Function to change the table Uploaded by Nalaka Deshan Kariyawasam
Books
Audiobooks
Magazines
Save
Embed
Share
Print
Download
News
Documents
Sheet Music
Join
CNC Advanced Concepts
1
of 45
User Manual of 710c_SDK
ZPIO
Search document
Other
Other
Other
You're Reading a Preview Unlock full access with a free trial.
Download With Free Trial
Other Sign up to vote on this title
Useful
Not useful
Home
Saved
Books
Audiobooks
Magazines
News
Documents
Sheet Music
Upload
Sign In
Join
Search
Home
Saved
870 views
0
Sign In
Upload
RELATED TITLES
0
Function to change the table Uploaded by Nalaka Deshan Kariyawasam
Books
Audiobooks
Magazines
Save
Embed
Share
Print
Download
News
Documents
Sheet Music
Join
CNC Advanced Concepts
1
of 45
User Manual of 710c_SDK
ZPIO
Search document
Other
Other
Other
You're Reading a Preview Unlock full access with a free trial.
Download With Free Trial
Other
Sign up to vote on this title
Other
Useful
Not useful
Home
Saved
Books
Audiobooks
Magazines
News
Documents
Sheet Music
Upload
Sign In
Join
Search
Home
Saved
870 views
0
Sign In
Upload
RELATED TITLES
0
Function to change the table Uploaded by Nalaka Deshan Kariyawasam
Books
Audiobooks
Magazines
Save
Embed
Share
Print
Download
News
Documents
Sheet Music
Join
CNC Advanced Concepts
1
of 45
User Manual of 710c_SDK
ZPIO
Search document
Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code Table. "
Returns Returns 1 on success, failure to return the corresponding error code. Error code specific instructions refer to "4.2 error code You're Reading a Preview Table. " Unlock full access with a free trial.
Download With Free Trial
RS485 , TCP IP
Sign up to vote on this title
Useful
Not useful
Home
Saved
Books
Audiobooks
Magazines
News
Documents
Sheet Music
Upload
Sign In
Join
