R
LISTED
APPROVED
!
WARNING
!
WARNING
!
WARNING
!
WARNING
!
WARNING
!
WARNING
!
CAUTION
Temperature °F
Pressure PSIG
Bar
30
12.5
0.86
40
18.8
1.30
50
26.0
1.79
60
34.4
2.37
70
44.1
3.04
80
55.2
3.81
90
67.7
4.67
100
81.8
5.64
110
97.7
6.74
120
115.4
7.96
130
135.1
9.31
Temperature °F
Pressure PSIG
Bar
30
1623
111.9
40
1669
114.7
50
1712
118.0
60
1756
121.1
70
1800
124.1
80
1845
127.2
90
1888
130.2
100
1931
133.1
110
1975
136.2
120
2018
139.1
130
2062
142.2
Description
Units
Measurement
N/A
170.0
Boiling Point at 14.7 psia
°F
1.9
Freezing Point
°F
-204
Critical Temperature
°F
214
Critical Pressure
psia
422
Critical Volume
ft.3 /lb.
0.0258
Critical Density
lb./ft.3
38.76
Specific Heat, Liquid at 77°F
Btu/lb.-°F
0.282
Specific Heat, Vapor at C onstant Pressure (1 atm) and 7 7°F
Btu/lb.-°F
0.185
Heat of Vaporization at Boiling Point
Btu/lb.
56.7
Thermal Conductivity of Liquid at 77 °F
lb./ft.-hr.-°F
0.040
Viscosity, Liquid at 77°F
lb./ft.-hr.-°F
0.433
Relative Dielectric Strength at 1 atm at 734 mm Hg, 77°F (N 2 = 1)
N/A
2.00
Solubility, by Weight, of Water in Agent at 70 °F
ppm
0.06%
Molecular Weight
Description
Units
Measurement
Molecular Weight
N/A
170.03
Boiling Point at 760 mm Hg
°C
-16.4
Freezing Point
°C
-131
Critical Temperature
°C
101.7
kPa
2912
Critical Volume
cc/mole
274
Critical Density
kg/m3
621
Specific Heat, Liquid at 25°C
kJ/kg°C
1.184
Specific Heat, Vapor at C onstant Pressure (1 atm) and 2 5°C
kJ/kg°C
0.808
Heat of Vaporization at Boi ling Poi nt at 25°C
kJ/kg°C
132.6
Thermal Conductivity of Liq uid at 25°C
W/m°C
0.069
Viscosity, Liquid at 25°C
centipose
0.184
Relative Dielectric Strength at 1 atm at 734 mm Hg, 25°C (N 2 = 1.0)
N/A
2.00
Solubility, by Weight, of Water in Ag ent at 21 °C
ppm
0.06% by weight
Critical Pressure
!
CAUTION
!
CAUTION
!
WARNING
fire suppression panel
PRESSURE OPERATED SWITCH 3P.D.T.
UL FM
pressure operated switch
FOR FIRE
BREAK G L A S S
P U L L H A N DEL
R
PULL HARD
KIDDE-FENWAL
pull station
distribution piping
pressure gauge
nozzle liquid level indicator
electric control head
valve
detector
Agent Storage Cylinder
N2 Driver
pull station FOR FIRE BREAKGLASS
PULLHANDLE
R
PULL HARD
KIDDE-FENWAL
pressure gauge
corner pulley
valve
cable operated control head nozzle
Agent Storage Cylinder
N2 Driver
Color
90-102300-001
Whi te
90-104070-001
Whi te
90-104890-001
Whi te
TYPE "I" CYLINDER VALVE THREAD FOR DISCHARGE HEAD
CONTROL PORT
P art Number
WARNING
!
0
SAFETY DISC ASSEMBLY
PRESSURE GUAGE
Part Number
THREAD FOR PROTECTION CAP
CYLINDER
A
Fill Weight (Nominal)
Empty Weight
lb.
kg
lb.
kg
90-102300-001
12.2
5.5
1 02 ± 2
46.3 ± 0.9
90-104070-001
21.0
9.5
1 86 ± 3
84.4 ± 1.4
90-104890-001
25.1
11.4
27 0 ± 3
122.5 ± 1.4
B
Volume
Height A
Diameter B
Part Number in.3
m3
in.
mm
in.
mm
90-102300-001
2 300
0.0377
55
1390
8.50
21 5
90-104070-001
4070
0.0667
62
1570
10.50
26 6
90-104890-001
4893
0.0801
69
1753
11.25
28 6
3.81" (97 mm)
WARNING
!
SAFETY CAP
CYLINDER VALVE LIQUID LEVEL INDICATO INDICATOR R LIFTING LUGS
PISTON
CYLINDER SPRING 3/4" NPS
3.94" (100 mm)
C
B
CYLINDER NAMEPLATE
TRANSFER OUTLET SED RUBBER RI OOVES TIGHTEN
SET POSITION
IDENTIFYING GROOVES IN SWIVEL NUT
OPERATED POSITION
2 1/2" - 14N3 SWIVEL NUT (FOR CONNECTION TO CYLINDER VALVE)
OUTER O-RING P/N 242466 INNER O-RING P/N 242467
A
STEM
3.81" (97 mm) PISTON BALL RETAINER STOP CHECK
Part Number
BALL CHECK
With LLI
Height (C)
Diameter (A)
Valve Height (B)
in.
mm
in.
mm
in.
mm
SPRING 3.94" (100 mm)
DISCHARGE OUTLET 3/4" NPS
SET POSITION
2 1/2 - 14N-3
OPERATED POSITION
SWIVEL NUT (FOR CONNECTION TO CYLINDER VALVE)
OUTER O-RING P/N 242466 INNER 0-RING P/N 242467
90-100225-001
No
52.75
13 40
12.75
3 24
4 7.5
1 20 7
90-100221-001
Yes
52.75
13 40
12.75
3 24
47.5
1 20 7
90-100395-001
No
58.36
14 82
16.00
4 06
53.1
1 34 9
90-100391-001
Yes
58.36
14 82
16.00
4 06
53.1
1 34 9
90-100675-001
No
58.50
14 86
22.00
5 59
50.3
1 27 8
90-100671-001
Yes
58.50
14 86
22.00
5 59
50.3
1 27 8
90-101010-001
No
70.00
17 7 8
24.00
6 10
61.8
1 57 0
90-101011-001
Yes
70.00
17 7 8
24.00
6 10
61.8
1 57 0
STEM
Empty Weight
Fill Range Part Number
PRO CAP ACTUATION PORT
Volume
lb.
kg
lb.
kg
ft.3
m3
90-100225-001
115.0-225.0
52.0-102.0
136
62
2.8850
0.0817
90-100221-001
115.0-225.0
52.0-102.0
136
62
2.8850
0.0817
90-100395-001
200.0-395.0
91.0-179.0
206
93
5.0654
0.1434
90-100391-001
200.0-395.0
91.0-179.0
206
93
5.0654
0.1434
90-100675-001
347.2-675.0
157.8-306.2
370
168
8.6800
0.2460
90-100671-001
347.2-675.0
157.8-306.2
370
168
8.6800
0.2460
90-101010-001
520.0-1010.0
236.4-458.1
505
230
13.0000
0.3680
90-101011-001
520.0-1010.0
236.4-458.1
505
230
13.0000
0.3680
OUTLET PROTECTION CAP
SAFETY CAP
PRO CAP ACTUATION PORT
VICTAULIC FITTING AND PLUG
SAFETY CAP
Part Number
Nomenclature
Discharge Outlet
Equivalent Length w/o Flex Hose
Equivalent Length w/ Flex Hose
ft.
m
ft.
m
90-10022X-001
225 lb. Cylinder
2"
59
18.0
65
19.81
90-10039X-001
395 lb. Cylinder
2"
59
18.0
65
19.81
90-10067X-001
675 lb. Cylinder
3"
50
15.2
80
24.40
90-10101X-001
1010 lb. Cylinder
3"
50
15.2
80
24.40
Temperature °F
FM-200 Vapor Pressure
Nitrogen Driver Pressure
PSIG
Bar
PSIG
Bar
30
12.5
0.86
1623
111.9
40
18.8
1.30
1699
114.7
50
26.0
1.79
1712
118.0
60
34.4
2.37
1756
121.1
70
44.1
3.04
1800
124.1
80
55.2
3.81
1845
127.2
90
67.7
4.67
1888
130.2
100
81.8
5.64
1931
133.1
110
97.7
6.74
1975
136.2
120
115.4
7.96
2018
139.1
130
135.1
9.31
2062
142.2
Liquid Level Part Number
225
283894
395
283894
675
283894
1010
06-118266-001
B F D
E G
H (hole diameter)
8.625 DIA.
12.905 DIA.
C
A
CAP
READING TAKEN AT TOP EDGE OF FITTING
Cylinder
GRADUATED TAPE P/N 283894 - SHOWN IN MAGNETIC INTERLOCK POSITION READY TO TAKE READING. O-RING
BRASS TUBE TAPE INSIDE BRASS TUBE
B F
FM-200 CYLINDER
E
D
G
FM-200 LIQUID LEVEL MAGNETIC END OF TAPE ENGAGES IN MAGNETIC FIELD OF FLOAT WHEN TAPE IS PULLED UP TO TAKE READING.
H (hole diameter)
10.875 DIA. 16.156 DIA.
C
A
MAGNET EMBEDDED IN FLOAT. FLOAT - FLOATS ON SURFACE OF LIQUID FM-200. FREE TO MOVE UP OR DOWN OUTSIDE OF BRASS TUBE.
RETAINER - FLOAT RESTS HERE WHEN CYLINER IS EMPTY.
Part Number
Cylinder Size
A
B
C
D
E
06-236127-001
225
11.91
27.00
7.88
8 .2 0
6.06
11.10
1.75
0.562
06-236126-001
395
15.16
32.28
9.88
9 .8 3
7.19
13.12
1.75
0.562
F
G
H
Note: Dimensions Note: Dimensions are i n inches. inches.
Part Number
Cylinder Size
A
B
C
D
E
F
G
H
06-236127-001
225
30 3
686
2 00
208
15 4
282
44
14
06-236126-001
395
38 5
820
251
250
18 3
333
44
14
Note: Dimensions Note: Dimensions are in millimeters.
Part Number
Cylinder Size
A
B
C
D
E
2700 14
2 3 00
7.94
11.5
10.4
1.00
3.50
2 70 1 57
40 7 0
10.0
14.0
12.4
1.75
4.50
Note: Dimensions are in inches.
B
Part Number
Cylinder Size
A
B
C
D
E
2 70 0 1 4
2 30 0
20 2
2 92
26 4
25
89
2 70 1 5 7
4 07 0
25 4
3 56
31 5
44
114
E
A
Note: Dimensions are in millimeters
F (hole size) C D
C
Part Number
Cylinder Size
A
B
C
D
E
F
06-236173-001
4070
21.4
10.9
13.6
1.75
15.75
0.625
06-236174-001
4890
22.4
11.4
14.1
1.75
16.50
0.625
Note: Note: Dimensions are in inches.
D
F (hole size)
B
E
Part Number
Cylinder Size
A
B
C
D
E
F
06-236173-001
4070
5 44
2 77
345
44.4
3 99
15.9
06-236174-001
4890
56 9
2 90
358
44.4
419
15.9
Note: Note: Dimensions are in millimeters
A
C D F B
E A
B
E
A
F (hole size) C D
Part N umber
C ylinder Siz e
Cylinder O.D .
A
B
C
D
E
F
2 35317
225
13 .60
13.09
17.06
15.44
1.75
6.06
0.625
2 81866
395
16 .00
15.50
19.50
17.88
1.75
7.25
0.625
2 9 46 5 1
675
22 .00
21.56
25.75
2 4.12
1.75
10.25
0.625
2 36125
1 01 0
24.00
24.83
27.75
2 6.00
1.75
12.13
0.625
Note: Dimensions Note: Dimensions are i n inches. inches.
P art N umber
C ylinder Siz e
C ylinder O.D .
A
B
C
D
E
F
2 35 31 7
2 25
3 45.44
332.00
433.00
392.0 0
44.0 0
154.00
16.0 0
2 81 86 6
3 95
406.00
394.00
495.00
454.00
44.0 0
184.00
16.0 0
294651
6 75
5 58.80
547.62
654.0 5
612.65
44.15
2 60.35
15.8 8
2 36 12 5
1010
6 10.00
619.25
704.6 5
660.40
44.15
308.10
15.8 8
Note: Dimensions Note: Dimensions are in millimeters.
3.25” (83 mm) 1.25-18 UNEF-3A CONNECTION
CONNECTION FOR FLEXIBLE ELECTRIC CONDUIT 3/4” NPT FEMALE
1/2"-14 NPT CONDUIT CONNECTION
LOCKING PIN
8.25” (210 mm) (3) 18 AWG-LEADS 21” ± 3” (533 ± 76 mm) LONG
SEAL WIRE U P ELECTRIC
LOCAL MANUAL RELEASE LEVER
CONTROLHEAD
6.18" (157 mm)
VOLTS AMPS
SWIVEL NUT 1.25 - 18 UNEF - 3B CONNECTION
PART NO.
SWIVEL NUT INDICATOR AND RESET STEM
TO RESET
1-1/4” 18NF-3 THREAD
USE SCREWDRIVER
S ET
R EL EA SE D
MADE IN U. S. A.
KIDDE-FENWAL,INC. 400 MAIN STREET ASHLAND,MA01721
4.00" (102 mm)
Part Number
Type
Voltage
Amps
Rating
24 Vdc
0.27 Continuous
18 Vdc @ 0.2 A to 30 Vdc @ 0.5 A
81-100000-001
Part Number
Type
Voltage
Amps
890181
Standard
24 Vdc
2.0
890149
Standard
125 Vac
0.3
890165*
Standard
115 Vdc
1.0
Explosion Proof
*Note: Not UL Listed for use with the ADS.
LOCAL MANUAL RELEASE LEVER
SEAL WIRE
CONNECTION FOR FLEXIBLE ELECTRIC CONDUIT 1/2" NPT FEMALE
LOCKING PIN
OPERATING SOLENOID UL LISTED FOR USE IN THE FOLLOWING HAZARDOUS LOCATIONS: CLASS GROUP OP. TEMP.
CONNECTING WIRES 36" (914 mm) LONG
C
I
D
II
E,F,G
-13 TO +150F (-25 TO +65C) -40 TO +150F (-40 TO +65C) -40 TO +150F (-40 TO +65C)
A 4 K I D S 0 0 H D L M E A A - N I F D N E , S N W M T A R A L 0 E E 1 T , I N 7 2 1 C .
P A R T N O S M . E T A D E NI U S . R . A E . L E A S E D
M I N S S A F T E N I R O R U E E T C N T A I O N U N C S S E E O T S C R R E E S W E D T R V I E R
U P
C O N E T L R E O C L R T H E C I A D
H Z V P C O U A B A L T L L L M S E P S
4.25" (108 mm)
SEAL WIRE CONNECTION FOR REMOTE PULL BOX PIPE OR CONDUIT 3/8" NPS MALE
CONNECTION FOR CABLE HOUSING TO SECOND CONTROL HEAD IF USED 3/8" NPS FEMALE. USE PNEUMATIC CONTROL HEAD CABLE HOUSINGS
3/8" PIPE (OR 1/2" EMT WITH ADAPTER P/N 843837)
SWIVEL NUT 1.50" (38 mm)
LOCAL MANUAL RELEASE LEVER
4.937” (125 mm)
THREADED NUT 3/8" NPS FOR PIPE 1/16" CABLE
LOCKING PIN
7.375” (187 mm) INDICATOR AND RESET STEM
I
DIRECTION OF PULL
CLOSURE DISC
5.25" (133 mm) 1-1/4"-18 NF-3 FEMALE
SWIVEL NUT 1.500 (38 mm) HEX 1.250-18 NF-3 THREAD
CABLE CLAMP AND WHEEL ASSEMBLY
Part Number
Type
Voltage
Amps
Rating
895630
Standard
24 Vdc
2.0 momentary
N/A
895627*
Standard
115 Vac
1.0 momentary
N/A
897494
Explosion Proof
24 Vdc
1.65 conti nuous
33.0 Watts
89 756 0*
E xplosi on Pro of
115 Va c
0 .13 conti nuous
15.4 Wa tts
895628**
Standard
125 Vdc
0.3 momentary
N/A
LOCKING PIN
ALLOW APPROX. 2" (50 mm) CLEARANCE FOR OPERATION OF LEVER CLOSED
* Not FM Approved for use with the ADS. ** Not UL Listed for use with the ADS.
BODY
SEAL WIRE LEVER TO OPEN 3.17" (81 mm)
SWIVEL NUT 1.50" (38 mm) SET
1-1/4"-18 NF-3 FEMALE 3.00" (76 mm)
OPERATED
STEM
1.250-18 UNEF-3A
CAP RETAINER
ALLOW APPROX. 2" (50.8 mm) CLEARANCE FOR OPERATION OF LEVER
LEVER SAFETY PIN
0.125-27 NPT PRESSURE INLET
3.48" (88.4 mm)
CLOSED
PISTON
SEAL WIRE
N E P O
BODY
TO OPEN
1/8" NPT PRESSURE INLET
4.50" (114.3 mm)
SET OPERATED PISTON
BODY
STEM
1.250-18 UNEF-3B
SET OPERATED 1.250-18 UNEF-3B 3.00" (76.2 mm)
OPTIONAL NAMEPLATE
FOR FIRE B RE AK G L AS S
P UL L H AN DL E
R
PULL HARD
1/8"-27 NPT PRESSURE INLET
KIDDE-FENWAL 400 Main Street - Ashland, MA 01721-2150 Tel(508)881-3000 FAX(508)881-0020
1/16” CABLE HAMMER P/N 928103
PISTON
5.00" (127 mm) BREAK GLASS P/N 928103
2.25" (57 mm)
PULL HANDLE
SWIVEL NUT
CABLE FASTENER FOR 1/16” CABLE
3/8” NPT FEMALE SECTION VIEW
SET OPERATED
3/8” PIPE
PULL HANDLE
5.87"
2.19" (55.6 mm)
4-COVER SCREWS
(BY INSTALLER)
(149 mm)
1.00" HEX (25.4 mm)
2 - NAMEPLATE BRACKETS (SUPPLIED WITH PULL BOX)
1.250-18 UNEF-3B
2 - HOLES FOR 1/4” MOUNTING SCREWS (SCREWS NOT SUPPLIED WITH PULL BOX)
1.50" HEX (38 mm)
5
5
3 3
6
6
7
7
2 2 4 1
4
3
8
3
1
Item No.
Qty.
Part Number
Description
1
1
06-236260-001
Nitrogen transfer "Y" fitting
2
1
878737
Pressure operated control head
3
2
06-118191-001
Fitting flared 1/8" x 1/4"
4
1
06-118193-001
3/16" flexible actuation hose
5
1
06-118192-001
1/8" branch tee
1/8" Schrader valve
6
1
263303
1/8" Schrader valve
1/8" Schrader valve cap
7
1
263304
1/8" Schrader valve cap
8
1
06-118330-001
3/4" Nipple
Item No.
Qty.
Part Number
Description
1
1
06 -236 124-00 1
Ni trog en tra nsfer fi tti ng
2
1
878737
Pressure operated control head
3
2
06-118191-001
F itti ng flared 1/8" x 1/4"
4
1
06-118193-001
3/16" flexible actuation hose
5
1
06-118192-001
1/8" branch tee
6
1
263303
7
1
263304
GAUGE PLUG
SAFETY OUTLET
OUTLET PORT-1/8" NPT FEMALE ATTACH ADAPTER HERE
1/8" NPT MALE
5/16"-TUBING MALE ADAPTER P/N 69920501
A 3/4-14NPT
1-1/4"-18 NF-3 FOR CONTROL HEAD CONNECTION
1.375 HEX (REF)
1.375 HEX (REF)
1.500 1.000 DIA DIA MIN.
CYLINDER P/N 877940 BRACKET P/N 877845
1.625 DIA. 1.250 HEX (REF)
3/4-14NPSM
16" (406 mm)
Part Number
Description
Dimension A
06-118207-001
For use with 395 lb. system
18.00"
06-118207-002
For use with 225 lb. system
14.75"
06-118207-003
For use with 675 lb. and 1010 lb. systems
23.62"
3.56" (90 mm)
A
STAINLESS STEEL BRAID
Part Number
EXTRUDED TEFLON INNERCORE
0.250-45° SAE SWIVEL - BRASS 7/16-20 (0.437- 20) THREAD
Description
877940
Nitroge n Pilot Cylinder, 1800 PSI @ 70°F (124 bar gauge @ 20°C)
877845
Mounting Bracket
69920501
Mounting Adapter
Dimension A Part Number
(inches)
(mm)
06-118193-001
16
406
06-118193-003
22
559
06-118193-002
36
1168
MALE CONNECTOR 1/8" NPT X 5/16" TUBING P/N 6992-0501 MALE ELBOW
MALE BRANCH TEE
1/8" NPT X 5/16" TUBING P/N 6992-0503
1/8" NPT X 5/16" TUBING P/N 6992-0505
1.500 in. (38 mm) HEX.
0.750-14 NPT
2.21 in. (56 mm) 3.05 in. (77.5 mm) 1.000-16 UN-2A
1/8” FLARE ADAPTER 1/8” NPT X 3/16 “ TUBING P/N 06-118191-001 1/8” ELBOW 1/8” NPT X 3/16” TUBING P/N 06-118284-001
1/8” BRANCH TEE 1/8” NPT x 3/16” TUBING P/N 06-118285-001
Part Number
Diameter (in.)
Area (in.2)
90-194129-107
0.107
0.0090
90-194129-111
0.111
0.0097
90-194129-116
0.116
0.0106
90-194129-120
0.120
0.0113
90-194129-129
0.129
0.0131
90-194129-136
0.136
0.0145
90-194129-144
0.144
0.0163
90-194129-156
0.156
0.0191
90-194129-170
0.170
0.0227
90-194129-182
0.182
0.0260
90-194129-199
0.199
0.0311
90-194129-213
0.213
0.0356
90-194129-234
0.234
0.0430
90-194129-261
0.261
0.0535
90-194129-281
0.281
0.0620
90-194129-316
0.316
0.0784
90-194129-348
0.348
0.0951
90-194129-391
0.391
0.1201
90-194129-438
0.438
0.1507
90-194129-484
0.484
0.1840
A
CONVOLUTED HOSE WITH STAINLESS STEEL BRAID OVERLAY 3" MALE SCHEDULE 40 GROOVED FITTING TYP.
D imens io n A
VALVE SEAT P/N 06-235930-001
Part Number
COPPER GASKET P/N 326420
CUP CHECK ASSEMBLY P/N 06-129860-001
SPRING
RETAINING RING
Min . B en d R ad iu s
Male in.
mm
in.
mm
283899
2
31
787.4
13.5
342.9
06-118225-001
3
54
1372.0
24.0
610.0
SPRING SEAT
O-RING P/N 56610916
3/4” CHECK DIFFUSER BODY
B (valve outlet connection)
D
C
A (system pipe connection)
C
Part Number
Size
283905
2
A 2" 11½ NPT
D
B 2.500" 12 UNJ
in.
mm
in.
mm
3.12
79.25
3.00 HEX
76.20
A
HOSE FM-200 CYLINDER VALVE CONNECTION, SWIVEL NUT
SYSTEM PIPE CONNECTION, MALE NPT THREAD
DIRECTION OF FLOW
!
CAUTION
1/4"-18NPT (TYP.)
A
2.00" (51 mm)
VALVE BODY
.81" (21 mm) HEX
Note: Install the valve with the arrow pointing in the direction of flow.
B
C FOR CONNECTION TO SYSTEM MANIFOLD
Part Number
No menclature
Pipe Type
ARROW INDICATES FLOW DIRECTION
Equivalent Length ft.
m
7
2.13
800327
Check Valve, 1/2" NPT
40 T and 40 W
800266
Check Valve, 3/4" NPT
40 T and 40 W
17
5.18
800443
Check Valve, 1" NPT
40 T and 40 W
12
3.66
800444
Check Valve, 1¼" NPT
40 T and 40 W
51
15.54
870152
Check Valve, 1½" NPT
40 T and 40 W
870151
Check Valve, 2" NPT
40 T and 40 W
263716
Check Valve, 2½" NPT
40 T and 40 W
268
81.69
870100
Check Valve, 3" NPT
40 T and 40 W
795
242.31
C
CHECK
57
Part Number
Size
A
B
C
877690
2
3.93" (99.8 mm)
4.88" (123.95 mm)
2 - 11½ NPT
17.37
165
50.29
Part Number
877690
Equivalent Length Nomenclature
2" El-Check
Pipe Type
40 T and 40 W
ft.
m
16
4.88
OPERATED
OPERATED
SET
SET
STEM SHOWN IN SET POSITIONPULL UP ON STEM TO MANUALLY OPERATE SWITCH
0.375" (9.52 mm) 8 COVER SCREWS
PRESSURE OPERATED SWITCH
WIRING SCREW TERMINALS
4.00" (101.6 mm)
3P.D.T.
TO RESET PUSH STEM TO SET POSITION
UL FM
15 AMP 125 Vac 10 AMP 250 Vac 3/4 HP 1-2-3 PH 125-480 Vac
4.00" (101.6 mm)
FRONT VIEW COVER REMOVED ½” SUPPLY PIPE WITH UNION
FRONT VIEW
OPERATING PRESSURE = 50 PSI MIN PRESSURE TESTED 1000 PSI
SWITCH 3PDT
BOX - 3 - ½” CONDUIT KNOCKOUTS EACH SIDE
COVER
GASKET
½” NPT FEMALE - CONNECT TO SYSTEM PIPING
SIDE SECTION
STEM IN OPERATED POSITION 1" NPT FEMALE BOTH ENDS FOR ELECTRIC CONNECTION SWITCH SUPPLIED WITH 2 - 1" NPT PIPE PLUGS
STEM IN SET POSITION PULL UP ON STEM TO MANUALLY OPERATE SWITCH
TO RESET PUSH STEM TO SET POSITION
4.37" (111 mm)
SET
POSITION
3 POLE PRESSURE OPERATED EXPLOSION PROOF SWITCH
CLUTCH
6.31" (160.27 mm)
3 POLE SINGLE THROW TOGGLE SWITCH
9.00" (228.6 mm) 30 AMP 250 Vac 20 AMP 600 Vac 2 HP 100-600 V 3 PHASE AC
6 - COVER SCREWS N I L E T
G A S
OPERATING HEAD EXPLOSION PROOF MACHINED JOINT. DO NOT USE GASKET OR MAR SURFACES.
2 - 13/32" MOUNTING HOLES
3.50" (88.9 mm) 4.18" (106.17 mm)
UNION CONNECTION
PRESSURE INLET 1/2" NPT FEMALE
4.56 in. (116 mm)
6.31 in. (160 mm)
SPRING RETURN ACTUATOR
2” NPT BALL VALVE
2” NPT
c B
A SIDE VIEW
FRONT VIEW
8.06 in. (205 mm) 3" NPT FEMALE
PIPING TO HAZARD
3" NPT FEMALE
53°MAX. SWING ANGLE
AGENT SOURCE
9.30 in. (236 mm)
Part Number
Description
Pipe Type
TOP VIEW
Equivalent Length
PIPING TO HAZARD
ft.
m
06-118213-001
2 in.
40 T and 40 W
13.4
4.08
06-118058-001
3 in.
40 T and 40 W
13.0
3.96 AGENT SOURCE
TOP VIEW
Part Number
Nominal Size
Material
Body Style
Inlets
Port
T-Flow Equivalent Length
L-Flow Equivalent Length
90-118325-001
1/2"
316 SS
Threaded
NPT
Full
0.42 ft.
3.67 ft.
90-118325-002
3/4"
316 SS
Threaded
NPT
Full
0.50 ft.
5.42 ft.
90-118325-003
1"
316 SS
Threaded
NPT
Full
0.94 ft.
7.38 ft.
90-118325-004
1¼"
316 SS
Threaded
NPT
Full
1.07 ft.
11.18 ft.
90-118327-001
1½"
316 SS
Bolted
NPT
Full
2.39 ft.
14.05 ft.
90-118327-002
2"
316 SS
Bolted
NPT
Full
2.73 ft.
17.80 ft.
90-118327-003
3"
316 SS
Bolted
NPT
Full
3.02 ft.
24.56 ft.
90-118327-004
4"
316 SS
Bolted
Flanged
Full
4.54 ft.
25.62 ft.
*Note: Not UL Listed for use with ADS Systems (FM Approved only).
Dimensions Part Number
Nominal Size A*
B
C*
Valve Working Pressure
Breakaway Torque
90-118325-001
1/2"
6 in.
0.59
8 in.
500 PSIG
100 in.-lb.
90-118325-002
3/4"
6 in.
0.79
8 in.
500 PSIG
130 in.-lb.
90-118325-003
1"
7 in.
0.98
10 in.
500 PSIG
190 in.-lb.
90-118325-004
1¼"
7 in.
1.25
10 in.
500 PSIG
300 in.-lb.
90-118327-001
1½"
9 in.
1.50
12 in.
500 PSIG
576 in.-lb.
90-118327-002
2"
15 in.
1.97
14 in.
500 PSIG
877 in.-lb.
90-118327-003
3"
22 in.
2.93
23 in.
500 PSIG
2366 in.-lb.
90-118327-004
4"
23 in.
3.53
23 in.
500 PSIG
3300 in.-lb.
Notes: *Dimensions are approximate for the entire assembly. **Not UL Listed for use with ADS Systems (FM Approved only).
Part Number
Nominal Size
Actuator Mechanism
Actuator Type
Actuator Volume
Actuator Torque
Working Pressure
Maximum Pressure
90-118325-001
1/2"
Rack and Pinion
Spring Return
14 cu. in.
180 in.-lb.
115 PSIG
145 PSIG
90-118325-002
3/4"
Rack and Pinion
Spring Return
14 cu. in.
180 in.-lb.
115 PSIG
145 PSIG
90-118325-003
1"
Rack and Pinion
Spring Return
21 cu. in.
266 in.-lb.
115 PSIG
145 PSIG
90-118325-004
1¼"
Rack and Pinion
Spring Return
40 cu. in.
429 in.-lb.
115 PSIG
145 PSIG
90-118327-001
1½"
Rack and Pinion
Spring Return
61 cu. in.
782 in.-lb.
115 PSIG
145 PSIG
90-118327-002
2"
Rack and Pinion
Spring Return
92 cu. in.
924 in.-lb.
115 PSIG
145 PSIG
90-118327-003
3"
Rack and Pinion
Spring Return
366 cu. in.
3539 in.-lb.
115 PSIG
145 PSIG
90-118327-004
4"
Rack and Pinion
Spring Return
366 cu. in.
3539 in.-lb.
115 PSIG
145 PSIG
*Note: Not UL Listed for use with ADS Systems (UL Listed only).
6.66
CYLINDER PORTS 2- 0.19 REF 2.76 REF 0.63 REF
1.63 REF
1.26 REF
0.95 REF
ASSEMBLY INLET, 1/4 NPT ASSEMBLY OUTLET, 1/4 NPT
0.16 REF
5.22 REF MUFFLERS
Description
Measurement
Pressure Range
55 to 120 PSIG
Voltage Rating
24 Vdc
Power Consumption (DC)
3W
Power Consumption (AC)
4.5A
Coil
9AAG
Weight
0.72 lb.
Ports
1/4" NPT
Includes:
2.62" (67 mm)
NORMAL POSITION (PRE-DISCHARGE) DISCHARGE INDICATION POSITION
Locking Manual Override Button
*Note: Not UL Listed for use with ADS Systems (FM Approved only). BODY
½” NPT MALE
CAP
0.93" (24 mm) HEX ACROSS FLATS
STEM-RED
1.75" (45 mm)
GASKET
COVER SCREW
BODY
0.62" (16 mm)
2.13" (54 mm) DIA
COVER 3" -18 NPS FEMALE 8
0.81" (21 mm)
0.62" (16 mm)
COVER SCREW K I
D D
E
UL
A
2 - ½” E.M.T. CONNECTIONS COMPRESSION TYPE
O-RING SEAL 3/8” - NPT - (VENT VALVE CONNECTION)
2.75" (70 mm) approx.
B (HEX)
3/8” - 18 NPT (CHARGE CONNECTION)
¾” NPT FEMALE FOR ELECTRICAL CONNECTION NAMEPLATE
5.37" (136 mm) 4.62" (117 mm)
SWITCH - DOUBLE POLE DOUBLE THROW
MAIN 2-COVER SCREWS TOGGLE
Part Number
6-CONNECTION TERMINALS
TOGGLE GUARDS CONDULET BOX
RESERVE
878758 2.75" (70 mm) COMMON L-1
Switch Rating: 30 Amps @ 120 Vac A-1
CYLINDER VALVE OUTLET CONNECTION
2.12" (54 mm) 2.50" (64 mm)
B-1 A-2
Cylinder Size
A
B
lb.
in.
mm
in.
mm
225 and 395
4.06
103.12
3.25
82.55
L-2 B-2 WIRING DIAGRAM
ORIFICE DIAMETER C
A B SECTION A-A
A
180o Nozzle Nom. Size
360o Nozzle
A
B
C
A
B
C
in.
in.
in.
in.
in.
in.
1/2"
1.47
3.00
1.50
1.44
3.00
1.50
3/4"
1.52
3.00
1.50
1.47
3.00
1.50
1.98
5.00
3.00
1.92
5.00
3.00
1" 1¼"
2.06
5.00
3.00
1.96
5.00
3.00
1½"
2.13
5.00
3.00
2.00
5.00
3.00
2.29
5.00
3.00
2.08
5.00
3.00
2"
RETAINING NUT
SAFETY DISC
SEAL WIRE
BODY 1.78" (45 mm)
3/4” NPT MALE
Pressure Relief Operates at Part Number
Agent PSIG
Bar
803242
Nitrogen
2400 to 2800
166 to 193
844346
FM-200
750 to 900
52 to 62
Cup Bur ner (% v /v)
Design Concentr ation, 30% Saf ety Factor 2 (% v /v)
Cup Bur ner (% v /v)
Design Concentr ation, 30% Saf ety Factor 2 (% v /v)
Acetone
6.9
9.0
1-Hexene
5.8
7.6
Acetonitr ile
4.3
7.0
Hydr aulic Fluid*
6.5
8.5
t-Amyl Alcohol
7.3
9.5
Hydr aulic Oil*
5.9
7.7
AV Gas
6.5
8.5
Hydr ogen
13.2
17.2
Benz ene
5.5
7.2
Isobutyl Alcohol
7.6
9.9
n-Butane
6.6
8.6
Isopr opanol
7.5
9.8
n-Butanol
7.6
9.9
JP 4
6.9
9.0
2-Butoxyethanol*
7.4
9.6
JP 5
6.9
9.0
2-Butoxyethyl Acetate*
6.9
9.0
Ker osene
7.4
9.6
n-Butyl Acetate
7.0
9.1
Methane
5.5
7.2
Car bon Disulf ide
11.8
15.4
Methanol
10.4
13.5
Chlor oethane
6.3
8.2
2-Methoxyethanol
9.4
12.2
Commer cial Gr ade Heptane
6.7
8.7
Methyl Ethyl Ketone
7.4
9.6
Cr ude Oil*
6.5
8.5
Methyl Isobutyl Ketone
7.0
9.1
Cyclohexane
7.2
9.4
Miner al Spir its
6.6
8.6
Cyclohexylamine
8.3
8.7
Mor pholine
7.9
10.3
Cyclopentanone
7.4
9.6
Nitr omethane
9.9
12.9
1,2-Dichlor oethane
5.8
7.6
n-Pentane
6.8
8.8
Diesel
6.7
8.7
Pr opane
6.7
8.7
N,N-Diethylethanolamine*
7.8
10.1
1-Pr opanol
7.7
10.0
Diethyl Ether
7.5
9.8
Pr opylene
6.2
8.1
Ethane
6.7
8.7
Pr opylene Glycol
8.6
11.2
Ethanol
8.3
10.8
Pyr r olidine
7.3
9.5
Ethyl Acetate
6.8
8.9
Tetr ahydr of ur an
7.4
9.6
Ethyl Benz ene*
6.3
8.2
Tetr ahydr othiophene
6.6
8.6
Ethylene
8.4
10.9
Toluene
5.6
7.3
Ethylene Glycol
7.6
9.9
Tolylene-2, 4-Diisocyanate
4.0
7.0
Gasoline-no lead
6.9
9.0
Tr ansf or mer Oil
7.3
9.5
n-Heptane
6.7
8.7
Tur bine Oil**
7.2
9.4
n-Hexane
6.9
9.0
Xylene
6.0
7.8
Fuel
Fuel
Tempa t (°F)c Temp t (°F)c
Specific Vapor Volume (ft.3/lb.)d
30
Weight Requirements of Hazard Volume, W/V (lb./ft. 3)b Design Concentrations (% by Volume)e 6
6.25
7
8
9
10
11
12
13
14
15
2.0210
0.0316
0.0330
0.0372
0.0430
0.0489
0.0550
0.0612
0.0675
0.0739
0.0805
0.0873
40
2.0678
0.0309
0.0322
0.0364
0.0421
0.0478
0.0537
0.0598
0.0659
0.0723
0.0787
0.0853
50
2.1146
0.0302
0.0315
0.0356
0.0411
0.0468
0.0525
0.0584
0.0645
0.0707
0.0770
0.0835
60
2.1612
0.0295
0.0308
0.0348
0.0402
0.0458
0.0514
0.0572
0.0631
0.0691
0.0753
0.0817
70
2.2075
0.0289
0.0302
0.0341
0.0394
0.0448
0.0503
0.0560
0.0618
0.0677
0.0737
0.0799
80
2.2538
0.0283
0.0296
0.0334
0.0386
0.0439
0.0493
0.0548
0.0605
0.0663
0.0722
0.0783
90
2.2994
0.0278
0.0290
0.0327
0.0378
0.0430
0.0483
0.0538
0.0593
0.0650
0.0708
0.0767
100
2.3452
0.0272
0.0284
0.0321
0.0371
0.0422
0.0474
0.0527
0.0581
0.0637
0.0694
0.0752
110
2.3912
0.0267
0.0279
0.0315
0.0364
0.0414
0.0465
0.0517
0.0570
0.0625
0.0681
0.0738
120
2.4366
0.0262
0.0274
0.0309
0.0357
0.0406
0.0456
0.0507
0.0560
0.0613
0.0668
0.0724
130
2.4820
0.0257
0.0269
0.0303
0.0350
0.0398
0.0448
0.0498
0.0549
0.0602
0.0656
0.0711
140
2.5272
0.0253
0.0264
0.0298
0.0344
0.0391
0.0440
0.0489
0.0540
0.0591
0.0644
0.0698
150
2.5727
0.0248
0.0259
0.0293
0.0338
0.0384
0.0432
0.0480
0.0530
0.0581
0.0633
0.0686
160
2.6171
0.0244
0.0255
0.0288
0.0332
0.0378
0.0425
0.0472
0.0521
0.0571
0.0622
0.0674
170
2.6624
0.0240
0.0250
0.0283
0.0327
0.0371
0.0417
0.0464
0.0512
0.0561
0.0611
0.0663
180
2.7071
0.0236
0.0246
0.0278
0.0321
0.0365
0.0410
0.0457
0.0504
0.0552
0.0601
0.0652
190
2.7518
0.0232
0.0242
0.0274
0.0316
0.0359
0.0404
0.0449
0.0496
0.0543
0.0592
0.0641
200
2.7954
0.0228
0.0238
0.0269
0.0311
0.0354
0.0397
0.0442
0.0488
0.0535
0.0582
0.0631
Specific Vapor Volume
a
Temp t
(°C)C
s
Weight Requirements of Haz ard Volume, W/V (kg/m3)b Design Concentration (% per Volume) e
(m3/kg)d
6
6.25
7
8
9
10
11
12
13
14
15
0
0.1268
0.5034
0.5258
0.5936
0.6858
0.7800
0.8763
0.9748
1.0755
1.1785
1.2839
1.3918
5
0.1294
0.4932
0.5152
0.5816
0.6719
0.7642
0.8586
0.9550
1.0537
1.1546
1.2579
1.3636
10
0.1320
0.4834
0.5051
0.5700
0.6585
0.7490
0.8414
0.9360
1.0327
1.1316
1.2328
1.3364
15
0.1347
0.4740
0.4949
0.5589
0.6457
0.7344
0.8251
0.9178
1.0126
1.1096
1.2089
1.3105
20
0.1373
0.4650
0.4856
0.5483
0.6335
0.7205
0.8094
0.9004
0.9934
1.0886
1.1859
1.2856
25
0.1399
0.4564
0.4765
0.5382
0.6217
0.7071
0.7944
0.8837
0.9750
1.0684
1.1640
1.2618
30
0.1425
0.4481
0.4678
0.5284
0.6104
0.6943
0.7800
0.8676
0.9573
1.0490
1.1428
1.2388
35
0.1450
0.4401
0.4598
0.5190
0.5996
0.6819
0.7661
0.8522
0.9402
1.0303
1.1224
1.2168
40
0.1476
0.4324
0.4517
0.5099
0.5891
0.6701
0.7528
0.8374
0.9230
1.0124
1.1029
1.1956
45
0.1502
0.4250
0.4439
0.5012
0.5790
0.6586
0.7399
0.8230
0.9000
0.9950
1.0840
1.1751
50
0.1527
0.4180
0.4366
0.4929
0.5694
0.6476
0.7276
0.8093
0.8929
0.9784
1.0660
1.1555
55
0.1553
0.4111
0.4293
0.4847
0.5600
0.6369
0.7156
0.7960
0.8782
0.9623
1.0484
1.1365
60
0.1578
0.4045
0.4225
0.4770
0.5510
0.6267
0.7041
0.7821
0.8410
0.9469
1.0316
1.1183
65
0.1604
0.3980
0.4156
0.4694
0.5412
0.6167
0.6929
0.7707
0.8504
0.9318
1.0152
1.1005
70
0.1629
0.3919
0.4092
0.4621
0.5338
0.6072
0.6821
0.7588
0.8371
0.9173
0.9994
1.0834
75
0.1654
0.3859
0.4031
0.4550
0.5257
0.5979
0.6717
0.7471
0.8243
0.9033
0.9841
1.0668
80
0.1679
0.3801
0.3971
0.4482
0.5178
0.5890
0.6617
0.7360
0.8120
0.8898
0.9694
1.0509
85
0.1704
0.3745
0.3912
0.4416
0.5102
0.5803
0.6519
0.7251
0.800
0.8767
0.9551
1.0354
90
0.1730
0.3690
0.3854
0.4351
0.5027
0.5717
0.6423
0.7145
0.7883
0.8638
0.9411
1.0202
HFC-227ea Concentration
km
PSIA
cm Hg
-3000
-0.92
16.25
84.0
1.11
-2000
-0.61
15.71
81.2
1.07
-1000
-0.30
15.23
78.7
1.04
0
0.00
14.71
76.0
1.00
1000
0.30
14.18
73.3
2000
0.61
13.64
3000
0.92
4000
9.0
90,000
5.00
9.5
95,000
5.00
10.0
100,000
5.00
10.5
105,000
5.00
11.0
110,000
1.13
11.5
115,000
0.60
12.0
120,000
0.49
Atmospheric Correction
ft.
Human Exposure Time (minutes)
Enclosure Pressure
ppm
Equivalent Altitude Factor
%v/v
0.96
70.5
0.93
13.12
67.8
0.89
1.21
12.58
65.0
0.86
5000
1.52
12.04
62.2
0.82
6000
1.83
11.53
59.6
0.78
7000
2.13
11.03
57.0
0.75
8000
2.44
10.64
55.0
0.72
9000
2.74
10.22
52.8
0.69
10000
3.05
9.77
50.5
0.66
!
CAUTION
% AGENT IN PIPE / %AGENT BEFORE FIRST TEE RATIO LIMITS (Ratio must fall in region marked 'acceptable') 100
90
80 E E T T S R I F E R O F E B T N E G A %
70
60
50
ACCEPTABLE
40
30
20
10
0 0
10
20
30
40
50
60
70
80
90
100
110
120
130
140
% AGENT IN PIPE
HAZARD A
HAZARD A
HAZARD A HAZARD B
HAZARD B HAZARD B
6 NOM PIPE DIAM. MINIMUM
6 NOM PIPE DIAM. MINIMUM 6 NOM PIPE DIAM. MINIMUM
Horizontal Feed HAZARD A
Vertical Feed HAZARD A
HAZARD B
6 NOM PIPE DIAM. MINIMUM
HAZARD B
BULL TEE FLOW SPLIT LIMITS
BULL TEE
OUT
6 NOM PIPE DIAM. MINIMUM
OUT
OUT - 50%
OUT - 50%
BULL TEE MINIMUM UNBALANCE
IN
BULL TEE FLOW SPLIT LIMITS
OUT - 85%
OUT - 15%
BULL TEE MAXIMUM UNBALANCE
IN - 100%
SIDE TEE FLOW SPLIT LIMITS Horizontal Feed
OUT
IN - 100%
OUT - 65%
SIDE TEE FLOW SPLIT LIMITS Horizontal Feed
IN - 100%
OUT - 85%
SIDE TEE MAXIMUM UNBALANCE
SIDE TEE MINIMUM UNBALANCE
OUT
HAZARD A
IN - 100%
SIDE TEE
IN
HAZARD B
OUT - 35%
OUT - 15%
SIDE TEE FLOW SPLIT LIMITS Vertical Feed
SIDE TEE FLOW SPLIT LIMITS Vertical Feed
OUT - 65%
OUT - 84%
OUT - 35%
OUT - 16%
IN - 100%
IN - 100%
SIDE TEE MINIMUM UNBALANCE
SIDE TEE MAXIMUM UNBALANCE
Pipe Diameters Pipe Size
1/2"
0.250
3.0
76
3/4"
0.375
4.5
110
1"
0.500
6.0
150
1¼"
0.625
7.5
190
1½"
0.750
9.0
230
2"
1.000
12.0
300
2½"
1.250
15.0
380
3"
1.500
18.0
460
4"
2.000
24.0
610
mm
in.
feet
46’ (14 m)
d = 60.5 (18.44 m)
56’ (17 m) 180° Nozzle
d = 36.2’ (11 m)
46’ (14 m)
56’ (17 m) 360° Nozzle
Nominal Pipe Size (inches)
System With A System With A Single Row of Nozzles Multiple Row of Nozzles
30’ Max
Flow Rate (lb./sec.)
Flow Rate (kg/s)
Minimum Design
Max. Nom. Design
Minimum Design
Max. Nom. Design
1/2
1
3.0
0.45
1.4
3/4
2
5.5
0.91
2.5
1
3.5
8.5
1.6
3.9
1¼
6
12.5
2.7
5.7
1½
9
20.0
4.1
9.0
2
14
30.0
6.3
13.6
2½
20
55.0
9.1
25.0
3
30
90.0
13.6
40.9
4
55
125.0
25
56.8
5
90
200.0
40.8
90.9
6
120
300.0
54.4
136.4
System With Ceiling and Subfloor Nozzles
30’ Max
30’ Max
Actuation Hose
Slave Nitrogen Driver (Typ.) with Pneumatic Control Head (P/N 878737)
Nitrogen Transfer Hose
Tee
Wall Mounting
Nitrogen Driver With Master Control Head
Elbow Tee (Typ.)
Agent Cylinder Actuation Assembly Kit (Typ.) Master Cylinder Set
14 Slave sets of Agent and Nitrogen Driver Cylinders
Note: Each Agent Cylinder will be connected to the distribution piping either through a valve outlet adapter or a flexible discharge hose. Each agent cylinder is capable of activating 1 pressure trip and/or 1 pressure switch.
800 ft. (243.8 m) Max. Length of 5/16” Stainless Steel Tubing
400 ft. (121.9 m) Max. Length of 1/4” Sch. 40 Pipe Nitrogen Transfer Hose
Slave Nitrogen Driver (Typ.) with Pneumatic Control Head (P/N 878737)
5/16" O.D. X 0.032" Wall Steel Tubing or 1 /4 ” S ch edu le 4 0 Pi pe
Tee
Nitrogen Driver With Master Control Head Tee
5 /1 6" O .D . X 0 .0 32 " Wa ll Steel Tubing or 1/4” Schedule 40 Pipe
Elbow Actuation Assembly Kit (Typ.)
Agent Cylinder
14 Slave sets of Agent and Nitrogen Driver Cylinders
Master Cylinder Set
Note: Each Agent Cylinder will be connected to the distribution piping either through a valve outlet adapter or a flexible discharge hose. Each agent cylinder is capable of activating 1 pressure trip and/or 1 pressure switch.
250 ft. (76.2 m) Max Length of 1/4” Sch. 40 Pipe
500 ft. (152.4 m) Max Length of 5/16” Stainless Steel Tubing
Slave Nitrogen Driver (Typ.) with Pneumatic Control Head
Elbow
5/16" O.D. X 0.032" Wall Steel Tubing or 1/4” Sch. 40 Pipe
Flare
Maximum 100 ft. of 5/16 O.D. X 0.032" wall Stainless steel tubing
Nitrogen Transfer Hose Master Control Head
Agent Cylinder
Tee Actuation Assembly Kit (Typ.)
15 Slave sets of Agent and Nitrogen Driver Cylinders
Nitrogen Driver With Pneumatic Control Head (P/N 878737)
5/16" O.D. X 0.032" Wall Steel Tubing or 1/4” Sch. 40 Pipe
Note: Each Agent Cylinder will bec onnected to the distribution piping either through a valve outlet adapter or a flexible discharge hose. Each agent cylinder is capable of activating 1 pressure trip and/or 1 pressure switch.
Nitrogen Transfer Hose Slave Nitrogen Driver (Typ.) with Pneumatic Control Head (P/N 878737)
Flare
Actuation Hose
Tee (Typ.)
Elbow
Master Control Head
Agent Cylinder
Actuation Assembly Kit (Typ.)
Master Nitrogen Pilot Driver with master Control Head
Nitrogen Driver With Pneumatic Control Head (P/N 878737)
250 ft. (76.2 m) Max. Length of 1/4” Sch. 40 Pipe
15 Slave sets of Agent and Nitrogen Driver Cylinders
500 ft. (152.4 m) Max. Length 5/16” Stainless Steel Tubing
Note: Each Agent Cylinder will be connected to the distribution piping either through a valve outlet adapter or a flexible discharge hose. Each agent cylinder is capable of activating 1 pressure trip and/or 1 pressure switch.
Number of Pieces Included Number of Cylinders
Kit P/N
Actuation Assy P/N 06-129882-001
22" Flex Hose P/N 06-118193-003
36" Flex Hose P/N 06-118193-002
Pneumatic Actuator P/N 878737
3/16" Flare Tee x 1/8" NPT P/N 06-118285-001
3/16" Flare Elbow x 1/8" NPT P/N 06-118284-001
2 Cylinder Set System Manifold
06-129944-002
2
1
0
1
1
1
3 Cylinder Set System Manifold
06-129944-003
3
1
1
2
2
1
4 Cylinder Set System Manifold
06-129944-004
4
1
2
3
3
1
5 Cylinder Set System Manifold
06-129944-005
5
1
3
4
4
1
Plus 1 C ylinder Set Manifold
06-129944-101
1
0
1
1
1
0
"X" ± 0.187
06-118193-00X
06-118285-001
06-118284-001
878737
KIT P/N 06-129882-001
Number of Pieces Included Number of Cylinders
Kit Part Number
16" Flex Hose P/N 06-118193-001
36" Flex Hose P/N 06-118193-002
Pneumatic Actuator P/N 878737
3/16" Flare Tee x 1/8" NPT P/N 06-118285-001
3/16" Flare Elbow x 1/8" NPT P/N 06-118284-001
Actuation Assembly P/N 06-129985-001
2 Cylinder Manifold
06-129986-002
1
1
2
2
1
2
3 Cylinder Manifold
06-129986-003
1
2
3
3
1
3
4 Cylinder Manifold
06-129986-004
1
3
4
4
1
4
Plus One Cylinder
06-129986-101
—
1
1
1
—
1
"X" ± 0.187
06-118193-00X
06-118285-001
06-118284-001
878737
KIT P/N 06-129882-001
Manifold Arrangement Kits (Typ.)
Plain Nut Discharge Head, (Typ.), P/N 872450
1/4" Sch 40 or 5/16 O.D. X 0.035" wall Stainless steel tubing
3" Valve
Control Head
Actuation Assembly Kit (Typ.), P/N 06-129985-001
1/4" Sch 40 or 5/16 O.D. X 0.035" wall Stainless steel tubing
Plain Nut Discharge Head (Typ.), P/N 872450
Control Head
3" Valve Actuation Assembly Kit (Typ.)
Maximum 500 ft. of 5/16 O.D. X 0.035" wall Stainless steel tubing
1/4" Sch 40 or 5/16 O.D. X 0.035" wall Stainless steel tubing
Control Head Nitrogen Pilot with Control Head
3" Valve Plain Nut Discharge Head (Typ.), P/N 872450 Actuation Assembly Kit (Typ.)
Maximum 500 ft. of 5/16 O.D. X 0.035" wall Stainless steel tubing
Control Head
Plain Nut Discharge Head (Typ.), P/N 872450
Nitrogen Pilot with Control Head
3" Valve
Actuation Assembly Kit (Typ.)
Pneumatic Control Head (Typ.), P/N 878737
) 1 0 d i 0 o 9 n 2 e 3 l o 8 S 1 1 c 6 i r 0 t c N e / l P E (
l l a B y e a v l W - a 3 V
) r a b 8 ( k I c S e r ) P h o 1 C t 0 6 1 a 0 r l 1 o u 4 o g 3 t k d e 3 t c a e e R 8 e h S H e 1 - y C l r 1 c o u 6 r g e i r t r s 0 t t o n i l v c n s N c e / a e o r w a l P F S V E C P (
L O S
. ) G I S P 0 0 8 1 ( e r u . s s y t e r i s p n d e d n a l l e i f z i d s n e a e m z a i s s e e h l e m t o b o f r t a o h t s c n o d s a o l e e e t e c a h b c t t n o d e f s l n . o t o u . u n e s r o s e e m o v d d e c c l a n v r . b t s l e i e a s r l a e d e v h e n l l y v d t u i i l l n a m v c l i r o t a r t b l u a o t o n y t s d l r c c i y n l n i o a i e e p a o p t t c c l o l g y d n w n n i l o e c i e 3 i e r p a l t r r g i g t i y u d h n c n h o o c r c e t r e c a l l t l l i a l i h a N e E n t E m A A • • • • •
) 6 4 3 4 4 8 N / P ( t e l t u O y t e f a S O / S
E
d a e H l o r t n o C c i r t c e l E
E
E
d a e H e g r 0 a h 5 c 4 s 2 7 i D 8 – N t / u P N ) , . n p i a y l T P (
2 N
d l o f i n a M e g r a h c s i D
0 0 k 1 2 - n a # M T F
O / S E
2 N
E 0 0 k 2 2 - n a # M T F
W E I V P O T
W E I V E D I S
E 2 N
) . 3 p 0 y 0 T 7 ( e 0 2 s 8 o 1 H 1 r 6 e 0 f s N n / a r P T " 1
0 0 k 3 2 - n a # M T F
k l e c v e a h V C k g c n e i w h S C r o
O B T D 3 G R 1 . N I A L Z P I A Y P H C
r e o i p e P s o d H r a x H e l F
l l a 2 B y E a V L W - A 3 V . l o S
A 3 O T D 2 G R L Y N I A Z C P I A P H
. l o S
l a n o i t p O
l e n a P
d a e H e g r 0 a h 5 c 4 s 2 7 i D 8 – / N t u P N ) , . n p i a y l T P (
s e v = l a d V e l d a e n e o N i t s c l e r e i n D n f a h o C #
l 1 l a E B V y L a A V W 3
l d o r a t e n H o C c i r t c e l E
r l o l a g e w n p " i i b p 5 t u 3 0 0 l 4 . e e h 0 t c X s S . s h D . s e c O n l n i 6 i a 4 / 1 t / 1 5 S l o r t n o C c i r t c d e a e l H E t o l i P n e g o r t i N
t o l i P n e g o r t i N
. e c n . e r s e e v f l e r a r v o y f a n w w 3 o h o s t w e o r a t s d e e i v t l m a i v l l l t a o b n s y i a e w - g 3 a o s u w l T a : r e e t n o e N G
E
t , 1 , 1 i s 0 s 0 K m 0 0 - m y t e 2 e 5 l b s 8 t s 8 8 9 y y m 9 S 9 e S . 2 s . 2 b 1 b 1 s l - l A 5 6 0 6 n 9 0 1 0 o 3 N 0 N i 1 / t d / a n P d P u a n t c 5 a A 2 5 2 7 r 6 o r f o f
. s r e d n i l y c . b l 5 9 ) . 3 b l d 0 n 1 a 0 5 1 2 d 2 e n h a t 5 g 7 n 6 i ( s s r u e d d e n v i e l i y h c c r a e e g r b a o l s e l h a t e n s a c u t e p v e o c b n a o n c s w i o h h T s . y s t t i n r a e l c m e f g o n e a s r r o a p r e u h p T e : h e t t o r o N f
) 1 0 d i 0 o 9 n 2 e 3 l o 8 S 1 1 c 6 i r 0 t c N e / l P E (
l l a B y a e v l W - a 3 V
k c e h C r o k c e h C g e n v i l w a S V
L O S
d a e H l o r t n o C c i r t c e l E
) r a b 8 ( I S r ) P o 1 t 0 6 a 0 l - 1 u 4 1 o g 3 t e 3 t R 8 e 1 S e 1 - y r u 6 r s 0 t s N o c e / a r P F P (
. ) G I S P 0 0 8 1 ( e r u . s y s t i e r s p n d e n d a l l i e f z d i n s d a e i e m o h z a n i c t l s s a o e e o e i . . e h l ) s o p s m t e a ° t f 0 a v 9 s o l d e a h t s e e e n t o v i e h b c d l w t l e n a s t a t t s n a b i o f u n r o e ( e o d e l v b m c a h s t a r e o r e . h l v t t e n e l l a s i a l u i v l l u v o a t r s l t t m d r c b d a s o a l v n e y i l r e a i c e n p l o t d e a c f g w n b r n o c e 3 a i e i r r d m l g y t i y t h u o n a i c e c n r w c l t e l l i l a - y n l l 3 E c E p A A N • • • • •
) 6 4 3 4 4 8 N / P ( t e l t u O y t e f a S O / S
E
d a e H l o r t n o C c i r t c e l E
E
) . p y T ( d a e H e g r a h c s i D 0 – 5 t u 4 N 2 7 n 8 i a l N / P P
E 2 N
d l o f i n a M e g r a h c s i D
d a e H e g r a 0 h 5 c 4 s 2 i 7 D 8 – N t / u P N ) , . n p i a y l T P (
0 0 k 2 - n a 1 M T # F
O / S
E 2 N
W E I V E D I S
0 0 k 2 n 2 - a M T # F
E
E
W E I V P O T
2 N
0 0 k 3 2 - n a # M T F
k e c l v e a h V C k g c n e i w h S C r o
O B T D 3 G R 1 . N I A Z L P I A Y P H C
l l a B 2 y E a V L W - A 3 V . l o S
O A 3 T D 2 G R L N A Y I C P Z I A P H
. l o S
l e n a P
f o # 1 = + d s e e v d l e a e V N l s a n l e i o n t n c a e r h i C D
l l a B 1 y E a V L W - A 3 V
c d i r a t e c H e l l E o r t n o C
r e o i p e P s o d H r a x H e l F
l l a g n r w i o " b 5 u e 3 t p 0 l i . P 0 e e 0 X t 4 . s s h D c . s e S O l n " 6 i a 1 t 4 / / 1 5 S t o l i P n e g o r t i N
e 3 s 0 o 0 H 7 r 0 e 2 f 8 s 1 n 1 a r 6 T 0 " N 1 / P , ) . p y T (
. e c n . e r s e e v f e l a r r v o f y a n w w 3 o h o s t w e r t o a 1 s d e . e t . v i 7 l 2 m a i v l 4 l t h l a o p a b n r s y i a e g a r w - g a 3 a P s o u l e w l b T a a : r T e e t n e o e e S N G
E
, 1 , 1 t i s 0 s 0 K m 0 0 - m y t e 2 e 5 l b s 8 t s 8 y 8 y 9 m 9 S 9 e S . 2 s . 2 1 b s l 1 - b l 6 A 5 6 0 0 0 n 9 1 N o 3 N 0 / i 1 t d / a n P d P u t a n c 5 a A 2 5 2 7 r 6 o r f o f
. s r e d n i l y c . b l 5 9 ) . 3 b d l 0 n 1 a 0 5 1 2 d 2 e n h a t 5 g 7 n 6 ( i s s r u e d d e n v i e l i y h c c r a e e g b r a o l s e l h t a e n s a c u t e p v e o c b n a o n c s w i o h h T s . y s t t i n r a e l c m e f g o n e a s r r o a p r e u h p T e : h e t t o r o N f
Maximum Number from One Pilot Cylinder
Ball Valve Size
Maximum Tubing 5/16" x 0.035" Weight
Maximum 1/4" Schedule 40 Pipe
4"
3
200 ft.
100 ft.
3"
3
200 ft.
100 ft.
2"
8
200 ft.
100 ft.
1½"
8
200 ft.
100 ft.
1¼"
8
200 ft.
100 ft.
1"
8
200 ft.
100 ft.
3/4"
8
200 ft.
100 ft.
1/2"
8
200 ft.
100 ft.
Control Head Type
P/N 803808
P/N 844648
ft.
979469
15
30
100
Electric/Cable
895630
6
30
100
Electric/Cable
895627
6
30
100
Electric/Cable, XP
897494
6
30
100
Electric/Cable, XP
897560
6
30
100
WARNING
Part Number
Cable Operated
*Note: Not UL Listed for use with ADS Systems (FM Approved only).
!
Max. Cable Length
Pulley
N2 PILOT CYLINDER
!
WARNING
¼” CHECK VALVE P/N WI-264985-000
N2 PILOT CYLINDER
NITROGEN DRIVER
!
!
CAUTION
CAUTION
PIPING TO HAZARD A
PIPING TO HAZARD B
Cap End of Manifold
Nipple
Straight through position; Closed to pipe network.
3-Way Ball VALVE 1
3-Way Ball VALVE 2
PIPING TO HAZARD A
PIPING TO HAZARD B (In Alarm)
Cap End of Manifold
Nipple
3-Way Ball VALVE 1
3-Way Ball VALVE 2
90° counterclockwise turn to Hazard B.
!
Part Number
Description
Time Delays Required to Open
90-118325-001
1/2" NPT
5.5 sec.
90-118325-002
3/4" NPT
5.5 sec.
90-118325-003
1" NPT
5.5 sec.
90-118325-004
1¼" NPT
5.5 sec.
90-118327-001
1½" NPT
5.5 sec.
90-118327-002
2" NPT
5.5 sec.
90-118327-003
3" NPT
5.5 sec.
90-118327-004
PEGAsys or other programmable FM Approved (for FM insured installations) /UL Listed compatible fire alarm suppression control panel
PEGAsys or other Release FM Approved/UL Listed fire alarm suppression Circuit control panel
5.5 sec.
Selector Valve Solenoid (see note 1)
S Selector Valve Solenoid (see note 1)
S Release Circuit
Release Circuit
Release Circuit
S
Nitrogen Pilot Control Head (see note 2)
S Nitrogen Driver Control Head (see note 2)
S Nitrogen Driver Control Head (see note 2)
Denotes Supervised Circuit
S
Release Circuit
4" Flanged
WARNING
PEGAsys or other programmable FM Approved (for FM insured installations) /UL Listed compatible fire alarm suppression control panel
PEGAsys or other Release FM Approved/UL Listed Circuit fire alarm suppression control panel
S
Selector Valve Solenoid (see note 1)
S Selector Valve Solenoid (see note 1)
Release Circuit Circuit
S Nitrogen Pilot Control Head (see note 2)
Release Circuit Release + Circuit _ PEGAsys or other programmable FM Approved (for FM insured installations) /UL Listed compatible fire alarm suppression control panel
S
Release Control Relay (see note 3)
Panel 1
PEGAsys or other FM Approved/UL Listed fire alarm suppression control panel
Initiating Circuit Circuit Release Circuit Release Circuit
EOLR
!
S Nitrogen Driver Control Head (see Note 2)
Nitrogen Driver Control Head (see Note 2)
!
WARNING
B FACE OF PIPE FITTING
C (HOSE SIZE)
A
!
WARNING
S
Denotes Supervised Circuit
S
S
Panel 2
WARNING
Dimensions in Inches
Cylinder Capacity
!
A
B
C*
225 lb.
19
21¾
2
395 lb.
19
21¾
2
675 lb.
33
36
3
1010 lb.
33
36
3
Dimensions in Milimeters
Cylinder Capacity A
B
225 lb.
483
552
395 lb.
483
552
675 lb.
838
914
1010 lb.
838
914
WARNING
Note: Dimensions A and B must be maintained in order to obtain a smooth radius in flexible loop. * Hose may require an adapter to connect to system piping.
!
WARNING
Note: Dimensions A and B must be maintained in order to obtain a smooth radius in flexible loop.
!
WARNING
3
21.75” (552 mm)
19.00” (483 mm)
5
8
15°
6
45° TOP VIEW
BACK VIEW
A
7
I H
4 B
G 225/395 lb.
2300/4070 cu. In.
C
1
2
FRONT VIEW
E
1. ASSY - CYL. and VALVE ADS ASSY 2. ASSY - CYL. and VALVE NITROGEN DRIVER 3. HOSE - FLEXIBLE DISCHARGE 4. STRAP - TWO CYLINDER 5. ASSY - DISCHARGE HEAD 6. ASSY - ACTUATION 7. FITTING - ORIFICE 8. HOSE - HIGH PRESSURE
F
D
Cylinder P/N
A
B
C
D
E
F
G
H
I
90-10022X-001
55.5
45.3
30.0
12.75
12.6
8.5
51.5
56.7
58.8
90-10139X-001
61.3
51.0
37.0
16.0
15.3
10.5
58.0
63.2
65.3
Note: The "X" within the part numbers denotes whether a liquid level indicator is ordered with the cylinder. A one (1) is used if a LLI is needed, a five (5) is used if one is not.
Cylinder P/N
A
B
C
D
E
F
G
H
I
90-10022X-001
1410
1150
762
324
320
216
1308
1440
1494
90-10039X-001
1575
1270
940
406
382
267
1473
1605
1659
Note: The "X" within the part numbers denotes whether a liquid level indicator is ordered with the cylinder. A one (1) is used if a LLI is needed, a five (5) is used if one is not.
!
WARNING
!
WARNING
!
WARNING
!
!
WARNING
WARNING
K
3 20.0
7
SIDE VIEW
5
8 6 34.0
FRONT VIEW
9
4
675/1010 lb.
A B
4070/ 4890 cu. in.
H 1. ASSY - CYL. AND VALVE ADS ASSY 2. ASSY - CYL. AND VALVE NITROGEN DRIVER 3. HOSE - FLEXIBLE DISCHARGE 4. STRAP - FM 200 CYLINDER 5. ASSY - DISCHARGE HEAD 6. ASSY - ACTUATION 7. FITTING - ORIFICE 8. HOSE - HIGH PRESSURE 9. STRAP NITROGEN DRIVER CYLINDERS
I
1
J
C 1.0
2
D
F E
G
Cylinder P/N
A
B
C
D
E
F
G
H
I
J
K
90-10067X-001
61.00
47.40
37.00
18.00
22.00
22.00
10.55
58.00
63.22
65.25
10.55
90-10101X-001
70.00
58.60
44.60
22.00
24.00
22.62
11.25
64.00
69.22
71.25
11.25
Note: The "X" within the part numbers denotes whether a liquid level indicator is ordered with the cylinder. A one (1) is used if a LLI is needed, a five (5) is used i f one is not.
Cylinder P/N
A
B
C
D
E
F
G
H
I
J
K
90-10067X-001
1549
1204
940
457
559
559
268
1473
1606
1657
268
90-10101X-001
1778
1488
1133
559
610
575
286
1626
1758
1810
286
Note: The "X" within the part numbers denotes whether a liquid level indicator is ordered with the cylinder. A one (1) is used if a LLI is needed, a five (5) is used i f one is not.
!
WARNING
1.00" HEX (25.4 mm)
1/8"-27 NPT PRESSURE INLET PISTON
2.19" (55.6 mm)
SWIVEL NUT
SET OPERATED
1.250-18 UNEF-3B 1.50" HEX (38 mm)
0.750 NPT TO FLEXIBLE CONDUIT ADAPTER
FLEXIBLE CONDUIT
OPTIONAL CONNECTION FOR MICROSWITCH (TERMINAL 2)
PLUS OR HOT CONNECTION (TERMINAL 3)
!
MINUS, NEUTRAL OR GROUND CONNECTION (TERMINAL 1)
TERMINAL STRAP 3
2
MICROSWITCH MICROSWITCH LEVER
INDICATOR AND RESET STEM
WARNING
SWIVEL NUT CAM
!
CAUTION
1/16” CABLE
1/2" E.M.T.
N L O I L T U C P E F R I O D
FLEXIBLE CONDUIT
!
3/4” NPT BY FLEXIBLE CONDUIT CONNECTOR
PLUS OR HOT CONNECTION
TERMINAL STRIP
POSITION CABLE BLOCK APPROXIMATELY AS SHOWN LEAVING 1/4” - 1/2” GAP
CAUTION
MINUS, NEUTRAL OR GROUND CONNECTION
THREAD CABLE THRU HOLE IN OPERATING LEVER
OPTIONAL CONNECTION FOR MICROSWITCH
MICROSWITCH
!
SWIVEL NUT
INDICATOR AND RESET STEM
MICROSWITCH LEVER
WARNING
CAM
VIEW WITH COVER AND NAMEPLATE REMOVED
!
CAUTION
!
!
WARNING
WARNING
!
CAUTION
!
WARNING
WARNING
!
!
!
WARNING
CAUTION
CAP
READING TAKEN AT TOP EDGE OF FITTING
O-RING BRASS TUBE TAPE INSIDE BRASS TUBE
FM-200 CYLINDER
FM-200 LIQUID LEVEL
GRADUATED TAPE P/N 283894 - SHOWN IN MAGNETIC INTERLOCK POSITION READY TO TAKE READING
MAGNETIC END OF TAPE ENGAGES IN MAGNETIC FIELD OF FLOAT WHEN TAPE IS PULLED UP TO TAKE READING.
MAGNET EMBEDDED IN FLOAT FLOAT - FLOATS ON SURFACE OF LIQUID FM-200 FREE TO MOVE UP OR DOWN OUTSIDE OF BRASS TUBE
RETAINER - FLOAT RESTS HERE WHEN CYLINER IS EMPTY
!
WARNING
225 lb. Liquid Level Calibration Chart P/N 90-1000221-001
130°F (54°C)
35 34 33 32 31 30 29 28 ) . 27 n i ( 26 g n 25 i d a 24 e R23 e 22 p a T 21 e 20 l b i x 19 e 18 l F 17 16 15 14 13 12 11 10 115
100°F (38°C) 70°F (21°C) 30°F (-1°C)
125
135
145
155
165
175
185
195
205
215
225
FM-200 Fill (lb.)
395 lb. Liquid Level Calibration Chart P/N 90-100391-001 35
130°F (54°C)
34 33 32
100°F (38°C)
31 30
70°F (21°C)
29 28 27
30°F (-1°C)
26 ) . 25 n i ( 24 g 23 n i d 22 a e 21 R e 20 p 19 a T 18 e l 17 b i x 16 e l F 15
14 13 12 11 10 9 8 7 6 5 200
210
220
230
240
250
260
270
280
290
300
310
320
330
340
350
360
370
380
390
FM-200 Fill (lb.)
675 lb. Calibration Chart P/N 90-100671-001 40
35
130°F (54°C)
30
70°F (21°C) 30°F (-1°C)
) s e h c 25 n i ( g n i d a e 20 R e p a T e b 15 i x e l F
10
5
0 300
350
400
450
500
550
600
650
700
FM-200 Weight (lb.)
1010 lb. Calibration Chart P/N 90-101011-001 45
40
130°F (54°C)
35
70°F (21°C) 30°F (-1°C)
) s 30 e h c n i ( g n 25 i d a e R e p 20 a t e l b i x e l F 15
10
5
0 500
600
700
800
900
1000
FM-200 Weight (lb.)
!
CAUTION
!
WARNING
!
WARNING
First Retest Due
Subsequent Retest Due
Special Marking
Full hydrostatic test including determination of cylinder expansion
5 years
5 years
Retest Date Month/Year
External visual inspection per Paragraph 173.34(e) (13) and CGA Pamphlet C-6, Section 3
5 years
Retest Method
5 years
!
Retest Date Followed by "E"
!
WARNING
WARNING
!
!
WARNING
CAUTION
WARNING
!
!
CAUTION
!
!
CAUTION
CAUTION
!
CAUTION
GAGING DIMENSIONS 0.515/0.565
VALVE CORE
VALVE CAP O-RING CAP
SPRING O-RING, PISTON, BACK-UP RING (See enlarged view in Figure 6-2.)
SAFETY CAP
SEAT RETAINER
O-RING, NECK
SIPHON TUBE
Description
225 to 395 lb. Cylinders
1
O-ring, cap
5661-0230
2
O-ring, piston
5661-0330
3
O-ring, seat
5661-0326
4
O-ring, neck
5661-0335
5
Schraeder core
220278
6
Back-up ring
554003-300
Valve Cap Pilot Check WK-923066-000 Pilot Check Spring WF-230640-000
Other Materials Lubri cant
Figure Item No.
PISTON O-RING SEAT
Piston O-Ring WK-566103-370 Back-Up Teflon Ring WK-554003-400
Valve Cap O-Ring WK-566102-410 Spring
Description
Piston
Parker Seal Co. Super-O-Lube or equi valent
Retainer O-Ring WK-566103-400
Safety Cap
Loctite ® Sealant
Loctite Corp. Sealant, Grade CV or equivalent
Locquic Primer
Loctite Corp. Primer, Grade N or equivalent
Refill Part (½ inch NPT Thread)
Neck O-Ring WK-566103-470
O-RING, PISTON
Inner Piston O-Ring WK-566101-170
TEFLON BACK-UP RING
Retainer 06-235924-001
Description
675 lb. Cylinders
1010 lb. Cylinders
O-ring, Cap
566102410
566102410
O-ring, Piston
566103370
566103370
O-ring, seat
566103400
566103400
O-ring, Neck
566103470
566103470
Pilot Check Assembly
923066
923066
Back-up Ring
554003400
554003400
APPROX. CENTER OF NAMEPLATE P/N WILL VARY ACCORDING APPLICABLE ASSEMBLY
A
60°
!
BS ) I N C L C A U D
L . ( E T Y T S F W S A
T .
VALVE ORIENTATION PLAN VIEW
A
T T W W M TY T
P 0 E M 0 F M 2 -
1.000 ± 0.125 VIEW "A" 58.375 REF
16.000 DIA. REF.
VIEW "B”
!
X X X . X
X X
X X . .
SEE VIEW "B"
.
X X
W
X
L L
CAUTION
P E
F U
Cylinder Size
Safety Disc P/N
Safety Disc Washer P/N
Holder Burst Disc
Torque
Burst Pressure PSIG @ 70°F
225 and 395 lb.
264925
220360
236062
47 ft. lb.
800-975
WARNING
!
WARNING
Safety Disk Retainer 06-235926-001
!
WARNING
Safety Disk Washer 06-118185-001 Safety Disk 06-118184-001
Burst Disk 06-235926-001
Burst Disk Holder 06-236063-001
COPPER GASKET - 32642
VALVE SEAT - 202490
Cylinder Siz e
S afety Disc P/N
Torque Value
MAIN CHECK - 800760
VALVE BODY - 270403
2.50-14 NS-3 (FOR DISCHARGE HEAD CONNECTION)
SLEEVE RETAINER 202804
PSIG @ 70° F
SPRING - 32641 5.44"
675 lb.
06-118184-001
1010 lb.
06-118184-001
90 ft. lb. 90 ft. lb.
800-975
PILOT CHECK 923066
800-975
1.25-18 NS-3 (FOR CONTROL HEAD CONNECTION)
DISC RETAINER - 220034 (WHITE) 295500 (WHITE) SAFETY DISC - 903684 (WHITE) AND WASHER WASHER- 294500
SLEEVE 202805
TYPICAL CYLINDER
Part Number
Description
Qty.
923066
Pilot Check Assembly
1
202805
Brass Sleeve
1
202804
Sleeve Retainer
1
32641
Spring
1
8 00760
Mai n C heck A sse mbly–5/8" I-Valve
1
32642
Copper Gasket
1
202490
Valve Seat
1
368200
Safety Disc (White for 2300 cu. in. driver)
1
903684
Safety Disc (White for 4070 cu. in. driver)
1
902048
Safety Disc (White for 4890 cu. in. driver)
1
294500
Washer
1
!
TOP CAP 2.5812 (97 mm)
TOP CAP O-RING P/N 209180 SPRING 3/4" NPS
WARNING
3.94" (100 mm)
DISCHARGE OUTLET IDENTIFYING GROOVES IN SWIVEL NUT
SET POSITION OPERATED POSITION
2 1/2 - 14N3 SWIVEL NUT (FOR CONNECTION TO CYLINDER VALVE)
STEM
Safety Disc and Washer P/N
Safety Disc Retainer Nut P/N
OUTER PACKING O-RING P/N 242466 INNER PACKING O-RING P/N 242467
Nitrogen Driver Size
PISTON
Torque Valve
PSIG @ 70°F
3.81" (97 mm) PISTON
902048 (white)
220034
90-104070-001
903684 (white)
90-104890-001
902048 (white)
90-102300-001
350 ± 35 in. lb.
2900-3250
295500
350 ± 35 in. lb.
3150-3500
220034
350 ± 35 in. lb.
BALL RETAINER STOP CHECK
BALL CHECK SPRING
3.94" (100 mm)
2900-3250
DISCHARGE OUTLET 3/4" NPS
SET POSITION
2 1/2 - 14N-3
OPERATED POSITION
SWIVEL NUT (FOR CONNECTION TO CYLINDER VALVE)
OUTER O-RING P/N 242466 INNER 0-RING P/N 242467 STEM
Part Number
Description
Qty.
242466
Outer Packing O-Ring
1
242467
Inner Packing O-Ring
1
209180
Packing O-Ring, Top Cap
1
VALVE SEAT P/N 06-235930-001
COPPER GASKET P/N 326420
CUP CHECK ASSEMBLY P/N 06-129860-001
SPRING
RETAINING RING
SPRING SEAT
!
WARNING
O-RING P/N 56610916
3/4” CHECK DIFFUSER BODY
Description
Part Number
Qty.
Valve Seat
06-235930-001
1
Cup Check Assembly
06-129860-001
1
Copper Gasket
326420
1
O-Ring
56610916
1
!
CAUTION
!
!
WARNING
WARNING
!
CAUTION
FM-2OO return line optional salvage connection
flex hose
15 6 20
19
16
25 P
17
27
29
26 21
18
24 flex hose 4
15
5
4
28
2 7
1
8
15
N2 26
15
1
FM-200 Agent
cylinder
13 Strainer 10
22
11 9
23
12
14
FM-200 liquid supply line
scale 3
1
Recharge Adapter
16
FM-200 Shipping Container Liquid
2
Seating Adapter
17
Vent Valve
3 Scale
18
Ball Valve
4
Vent Valve - Recharge
19
FM-200 Shipping Container Vapor
5
Vent Valve - Seating
20
Vent Valve
6
Ball Valve
21
Ball Valve
7
Ball Valve
22
FM-200 Shipping Container
8
Ball Valve
23
FM-200 Agent Storage Container
9
3- Way Valve
24
Ball Valve - Gauge
10
Ball Valve
25
Master Pressure Gauge
11 Ball Valve
26
Ball Valve
12
Safety Relief - Liquid
27
Vent Valve
13
Safety Relief - Vapor
28
Nitrogen Supply
29
Pressure Regulator
14 Pump 15
Check Valve
!
CAUTION
!
WARNING
Pressure versus Temperature Temperature o F ( oC)
Pressure PSIG (bar)
60 (15.6)
34.4 (2.37)
70 (21.1)
44.1 (3.04)
80 (26.7)
55.1 (3.79)
90 (32.2)
67.6 (4.66)
!
CAUTION
!
WARNING
!
CAUTION
Cylinder Size
Cylinder Fill Weight
Maximum Allowable Leakage
lb.
lb.
oz./yr.
90-100221-001
225
115 to 225
1.81
90-100225-001
225
115 to 225
1.81
90-100391-001
395
200 to 395
3.34
90-100395-001
395
200 to 395
3.34
90-100671-001
675
343 to 675
5.74
90-100675-001
675
343 to 675
5.74
90-101010-001
1010
512 to 1010
8.68
90-101011-001
1010
512 to 1010
8.68
Part Number
!
WARNING
!
WARNING
!
WARNING
!
Description
Fill Weight (lb.) Nominal
90-102300-001
2300 cu. in. nitrogen driver
12.2
90-104070-001
4070 cu.in. nitrogen driver
22.1
90-104890-001
4890 cu. in. nitrogen driver
25.1
WARNING
Part Number
N2 PRESSURE - TEMPERATURE CHART
2100
! 2000
1900
E R U S E E S U R R S P S R E A L P N I E M B L O A N O W
1800
G I S P E 1700 R U S S E 1600 R P
L A L M U N I M I M
1500
1400
RECHARGE
1300
1200 -40°
-20°
0°
20° 40° 60° 80° TEMPERATURE °F
100°
120°
140°
WARNING
!
WARNING
!
WARNING
!
CAUTION
!
WARNING
Nomenclature
Part Number
CYLINDER/VALVE ASSEMBLIES 2300 cu. in. Nitrogen Driver Cylinder/Valve Assembly (for use with 225 lb. agent cylinders)
90-102300-001
4070 cu. in. Nitrogen Driver Cylinder/Valve Assembly (for use with 395 lb. and 675 lb. agent cylinders) Note: Two are required for use with the 675 lb. agent cylinders.
90-104070-001
4890 cu. in. Nitrogen Driver Cylinder/Valve Assembly (for use with 1010 lb. agent cylinders) Note: Two are required for use with the 1010 lb. agent cylinders.
90-104890-001
Vertical Mount Only—FM-200 ADS Cylinder and Valve Assemblies 225 lb. Capacity Cylinder and Valve Assembly
90-100225-001
225 lb. Capacity Cylinder and Valve Assembly with LLI*
90-100221-001
395 lb. Capacity Cylinder and Valve Assembly
90-100395-001
395 lb. Capacity Cylinder and Valve Assembly with LLI*
90-100391-001
675 lb. Capacity Cylinder and Valve Assembly
90-100675-001
675 lb. Capacity Cylinder and Valve Assembly with LLI*
90-100671-001
1010 lb. Capacity Cylinder and Valve Assembly
90-101010-001
1010 lb. Capacity Cylinder and Valve Assembly with LLI*
90-101011-001
*Note: LLI = Cylinder with liquid level indicator. ACTUATION ASSEMBLIES Actuation Assembly (for use with 225 and 395 lb. systems)
06-129882-001
Actuation Assembly (for use with 675 and 1010 lb. systems)
06-129985-001
Orifice Fitting, 0.107" Diameter
90-194129-107
Orifice Fitting, 0.111" Diameter
90-194129-111
Orifice Fitting, 0.116" Diameter
90-194129-116
Orifice Fitting, 0.120" Diameter
90-194129-120
Orifice Fitting, 0.129" Diameter
90-194129-129
Orifice Fitting, 0.136" Diameter
90-194129-136
Nomenclature
Part Number
ACTUATION ASSEMB LIES (continued) Orifice Fitting, 0.234" Diameter
90-194129-234
Orifice Fitting, 0.261" Diameter
90-194129-261
Orifice Fitting, 0.281" Diameter
90-194129-281
Orifice Fitting, 0.316" Diameter
90-194129-316
Orifice Fitting, 0.348" Diameter
90-194129-348
Orifice Fitting, 0.391" Diameter
90-194129-391
Orifice Fitting, 0.438" Diameter
90-194129-438
Orifice Fitting, 0.484" Diameter
90-194129-484
ACTUATION ASSEMBLY KITS FOR MANIFOLDING (225 AND 395 LB. S YSTEMS) 2 Cylinder Manifold
06-129944-002
3 Cylinder Manifold
06-129944-003
4 Cylinder Manifold
06-129944-004
5 Cylinder Manifold
06-129944-005
Plus 1 Cylinder Manifold (add to above for more than 5 cylinders)
06-129944-100
Actuation Assembly Kits for Manifolding (675 and 1010 lb. Systems) 2 Cylinder Manifold
06-129986-002
3 Cylinder Manifold
06-129986-003
4 Cylinder Manifold
06-129986-004
Plus 1 Cylinder Manifold (Add to Above for More Than Four Cylinders)
06-129986-101
ASSOCIATED EQUIPMENT–NITROGEN DRIVER CYLINDERS Discharge Head, Grooved Nut
872442
Discharge Head, Plain Nut
872450
1" Nitrogen Transfer Hose = 18.00" OAL (395 lb. Cylinder System)
06-118207-001
1" Nitrogen Transfer Hose = 14.75" OAL (225 lb. Cylinder System)
06-118207-002
1" Nitrogen Transfer Hose = 23.62" OAL (675 and 1010 lb. Cylinder Systems)
06-118207-003
Nitrogen Driver Cylinder Strap (for use with 90-102300-001 Driver Cylinder)
270014
Nitrogen Driver Cylinder Strap (for use with 90-104070-001 Driver Cylinder)
270157
C ombi ned Ni trogen D ri ver Cyli nder Strap (for us e wi th 90-104070-001 Dri ver C yli nder)
0 6-236 17 3-001
C ombi ned Ni trogen D ri ver Cyli nder Strap (for us e wi th 90-104890-001 Dri ver C yli nder)
0 6-236 17 4-0 01
Nomenclature
Part Number
Flexible Discharge Hoses 2" for use with 225 and 395 lb. Cylinders
283899
3" for use with 675 and 1010 lb. Cylinders
06-118225-001
Valve Outlet Adapters 225 and 395 lb. Cylinders
283905
Cylinder Straps Combined Cylinder Strap for 225 lb. System
06-236127-001
Combined Cylinder Strap for 395 lb. System
06-236126-001
225 lb. Cylinder
235317
395 lb. Cylinder
281866
675 lb. Cylinder
294651
1010 lb. Cylinder
236125
Cradles 225 lb. Cylinder
235431
395 lb. Cylinder
281867
Front Clamps 225 lb. Cylinder
293457
395 lb. Cylinder
281868
Control Heads Explosion Proof Control Head
81-100000-001
Electric, Standard 24 Vdc
890181
Electric, Standard 115 Vac
890165
Electric, Standard 125 Vdc
890149
Electric/Cable 115 Vac
895627
Electric/Cable 125 Vdc
895628
Electric/Cable (Explosion Proof) 24 Vdc
897494
Electric/Cable (Explosion Proof) 115 Vac
897560
Lever Operated
870652
Pressure Operated
878737
Pressure Operated, Stackable
878750
Lever/Pressure Operated
878751
Cable Operated
979469
Electric/Cable (Explosion Proof) 115 Vac
897560*
*Note: UL Listed but not FM Approved for use with FM-200 systems.
Nomenclature
Part Number
Pressure Control Equipment Actuation Hose, 22"
264987
Actuation Hose, 30"
264986
Nitrogen Pilot Cylinder
877940
Nitrogen Pilot Cylinder w/ Pressure Switch (open under pressure)
06-129773-001
Nitrogen Pilot Cylinder w/ Pressure Switch (closed under pressure)
06-129773-002
Mounting Bracket, Nitrogen Pilot Cylinder
877845
1/4" Check Valve
264985
Safety Outlet, FM-200
844346
Safety Outlet, Nitrogen/CO2
803242
Flexible Actuation Hose, 16 in.
06-118193-001
Flexible Actuation Hose, 22 in.
06-118193-002
Flexible Actuation Hose, 36 in.
06-118193-003
Remote Co ntrol Equipment, Electric Operated Pull Box, Electric Remote 24 Vdc
84-100007-001
Pull Box, Electric Remote 125 Vac
893608
Remote Control Equipment, Cable Operated Cable Manual Pull Station, Surface
871403
Corner Pulley, Watertight
803808
Corner Pulley, 1/2” EMT
844648
Z-Bracket
60532
Adapter, 1/2” EMT
843837
Dual-Pull Equalizer
840051
Dual-Pull Mechanism
840058
Auxiliary Equipment Pressure Operated Switch, Standard
486536
Pressure Operated Switch, Ex Proof
981332
Pressure Operated Trip
874290
Main to Reserve Transfer Switch
802398
Discharge Indicator 1/2" (Al)
875553
Nomenclature
Part Number
Check Valves Check Valve, 1/2” NPT
800327
Check Valve, 3/4” NPT
800266
Check Valve, 1” NPT
800443
Check Valve, 1¼” NPT
800444
Check Valve, 1½” NPT
870152
Check Valve, 2” NPT
870151
Check Valve, 2½” NPT
263716
Check Valve, 3" NPT
870100
Swing Check Valve, 2" NPT
06-118213-001
Swing Check Valve, 3" NPT
06-118058-001
Manifold El-Check Valve, 2” NPT
877690
Directional Valve, 1/2" NPT*
90-118325-001
Directional Valve, 3/4" NPT*
90-118325-002
Directional Valve, 1" NPT*
90-118325-003
Directional Valve, 1¼" NPT*
90-118325-004
Directional Valve, 1½" Flanged*
90-118327-001
Directional Valve, 2" Flanged*
90-118327-002
Directional Valve, 3" Flanged*
90-118327-003
Directional Valve, 4" Flanged*
90-118327-004
Pneumatic Solenoid*
06-118329-001
Pressure Regulator*
90-118334-001
CYLINDER RECHARGE ADAPTERS Cylinder Size, 225 and 395 lb.
878758
NAME PLATE "Main"
31033
"Reserve"
31034
"Warning FM-200"
06-231865-739
ESCUTCHEON PLATES 3" Escutcheon Plate
06-236133-001
5" Escutcheon Plate
06-236134-001
*Note: Not UL Listed for use with ADS Systems (FM Approved only.)
!
WARNING
UL Listed 360 Degree Nozzles Area (in2) 1/2" NPT
3/4" NPT
1" NPT
0.0460
90-194423-101
0.0475
90-194423-102
0.0491
90-194423-103
0.0519
90-194423-104
0.0535
90-194423-105
0.0554
90-194423-106
0.0603
90-194423-107
0.0620
90-194423-108
0.0661
90-194423-109
0.0716
90-194423-110
0.0767
90-194423-111
0.0784
90-194423-112
0.0845
90-194423-113
0.0866
90-194423-114
0.0928
90-194423-115
0.0951
90-194423-116
0.1014
90-194423-117
0.1064
90-194423-118
0.1116
90-194423-119
90-194424-119
0.1170
90-194423-120
90-194424-120
0.1238
90-194423-121
90-194424-121
0.1296
90-194423-122
90-194424-122
0.1340
90-194423-123
90-194424-123
0.1398
90-194423-124
90-194424-124
0.1503
90-194423-125
90-194424-125
0.1612
90-194423-126
90-194424-126
0.1726
90-194423-127
90-194424-127
0.1843
90-194423-128
90-194424-128
90-194425-128
0.1963
90-194423-129
90-194424-129
90-194425-129
1-1/4" NPT
1-1/2" NPT
2" NPT
UL Listed 360 Degree Nozzles Area (in2) 1/2" NPT
3/4" NPT
1" NPT
0.2088
90-194423-130
90-194424-130
90-194425-130
0.2216
90-194423-131
90-194424-131
90-194425-131
0.2349
90-194423-132
90-194424-132
90-194425-132
0.2485
90-194424-133
90-194425-133
0.2625
90-194424-134
90-194425-134
0.2769
90-194424-135
90-194425-135
0.2917
90-194424-136
90-194425-136
0.3068
90-194424-137
90-194425-137
90-194426-137
0.3223
90-194424-138
90-194425-138
90-194426-138
0.3382
90-194424-139
90-194425-139
90-194426-139
0.3546
90-194424-140
90-194425-140
90-194426-140
0.3883
90-194424-141
90-194425-141
90-194426-141
0.4058
90-194424-142
90-194425-142
90-194426-142
0.4236
90-194424-143
90-194425-143
90-194426-143
90-194427-143
0.4418
90-194425-144
90-194426-144
90-194427-144
0.4604
90-194425-145
90-194426-145
90-194427-145
0.4793
90-194425-146
90-194426-146
90-194427-146
0.5185
90-194425-147
90-194426-147
90-194427-147
0.5386
90-194425-148
90-194426-148
90-194427-148
0.5592
90-194425-149
90-194426-149
90-194427-149
0.5801
90-194425-150
90-194426-150
90-194427-150
0.6230
90-194425-151
90-194426-151
90-194427-151
0.6450
90-194425-152
90-194426-152
90-194427-152
0.6903
90-194425-153
90-194426-153
90-194427-153
90-194428-153
0.7135
90-194426-154
90-194427-154
90-194428-154
0.7611
90-194426-155
90-194427-155
90-194428-155
0.7854
90-194426-156
90-194427-156
90-194428-156
0.8352
90-194426-157
90-194427-157
90-194428-157
0.8608
90-194426-158
90-194427-158
90-194428-158
0.9129
90-194426-159
90-194427-159
90-194428-159
0.9666
90-194426-160
90-194427-160
90-194428-160
1-1/4" NPT
1-1/2" NPT
2" NPT
UL Listed 360 Degree Nozzles Area (in2) 1/2" NPT
3/4" NPT
1" NPT
1-1/4" NPT
1-1/2" NPT
2" NPT
1.0218
90-194426-161
90-194427-161
90-194428-161
1.0499
90-194426-162
90-194427-162
90-194428-162
1.1075
90-194426-163
90-194427-163
90-194428-163
1.1667
90-194426-164
90-194427-164
90-194428-164
1.2272
90-194427-165
90-194428-165
1.2892
90-194427-166
90-194428-166
1.3530
90-194427-167
90-194428-167
1.4183
90-194427-168
90-194428-168
1.4849
90-194427-169
90-194428-169
1.5530
90-194427-170
90-194428-170
1.6230
90-194427-171
90-194428-171
1.6944
90-194428-172
1.7671
90-194428-173
1.9175
90-194428-174
2.0739
90-194428-175
2.2365
90-194428-176
2.4053
90-194428-177
2.5802
90-194428-178
UL Listed 180 Degree Nozzles Area (in2) 1/2" NPT
3/4" NPT
1" NPT
0.0460
90-194413-101
0.0475
90-194413-102
0.0491
90-194413-103
0.0519
90-194413-104
0.0535
90-194413-105
0.0554
90-194413-106
0.0603
90-194413-107
0.0620
90-194413-108
0.0661
90-194413-109
0.0716
90-194413-110
0.0767
90-194413-111
0.0784
90-194413-112
0.0845
90-194413-113
0.0866
90-194413-114
0.0928
90-194413-115
0.0951
90-194413-116
0.1014
90-194413-117
0.1064
90-194413-118
0.1116
90-194413-119
90-194414-119
0.1170
90-194413-120
90 -194414-120
0.1238
90-194413-121
90-194414-121
0.1296
90-194413-122
90 -194414-122
0.1340
90-194413-123
90 -194414-123
0.1398
90-194413-124
90 -194414-124
0.1503
90-194413-125
90 -194414-125
0.1612
90-194413-126
90 -194414-126
0.1726
90-194413-127
90 -194414-127
0.1843
90-194413-128
90-194414-128
90-194415-128
0.1963
90-194413-129
90-194414-129
90-194415-129
1-1/4" NPT
1-1/2" NPT
2" NPT
UL Listed 180 Degree Nozzles Area (in2) 1/2" NPT
3/4" NPT
1" NPT
0.2088
90-194413-130
90-194414-130
90-194415-130
0.2216
90-194413-131
90-194414-131
90-194415-131
0.2349
90-194413-132
90-194414-132
90-194415-132
0.2485
90-194414-133
90-194415-133
0.2625
90-194414-134
90-194415-134
0.2769
90-194414-135
90-194415-135
0.2917
90-194414-136
90-194415-136
0.3068
90-194414-137
90-194415-137
90-194416-137
0.3223
90-194414-138
90-194415-138
90-194416-138
0.3382
90-194414-139
90-194415-139
90-194416-139
0.3546
90-194414-140
90-194415-140
90-194416-140
0.3883
90-194414-141
90-194415-141
90-194416-141
0.4058
90-194414-142
90-194415-142
90-194416-142
0.4236
90-194414-143
90-194415-143
90-194416-143
90-194417-143
0.4418
90-194415-144
90-194416-144
90-194417-144
0.4604
90-194415-145
90-194416-145
90-194417-145
0.4793
90-194415-146
90-194416-146
90-194417-146
0.5185
90-194415-147
90-194416-147
90-194417-147
0.5386
90-194415-148
90-194416-148
90-194417-148
0.5592
90-194415-149
90-194416-149
90-194417-149
0.5801
90-194415-150
90-194416-150
90-194417-150
0.6230
90-194415-151
90-194416-151
90-194417-151
0.6450
90-194415-152
90-194416-152
90-194417-152
0.6903
90-194415-153
90-194416-153
90-194417-153
90-194418-153
0.7135
90-194416-154
90-194417-154
90-194418-154
0.7611
90-194416-155
90-194417-155
90-194418-155
0.7854
90-194416-156
90-194417-156
90-194418-156
0.8352
90-194416-157
90-194417-157
90-194418-157
0.8608
90-194416-158
90-194417-158
90-194418-158
0.9129
90-194416-159
90-194417-159
90-194418-159
0.9666
90-194416-160
90-194417-160
90-194418-160
1-1/4" NPT
1-1/2" NPT
2" NPT
UL Listed 180 Degree Nozzles Area (in2) 1/2" NPT
3/4" NPT
1" NPT
1-1/4" NPT
1-1/2" NPT
2" NPT
1.0218
90-194416-161
90-194417-161
90-194418-161
1.0499
90-194416-162
90-194417-162
90-194418-162
1.1075
90-194416-163
90-194417-163
90-194418-163
1.1667
90-194416-164
90-194417-164
90-194418-164
1.2272
90-194417-165
90-194418-165
1.2892
90-194417-166
90-194418-166
1.3530
90-194417-167
90-194418-167
1.4183
90-194417-168
90-194418-168
1.4849
90-194417-169
90-194418-169
1.5530
90-194417-170
90-194418-170
1.6230
90-194417-171
90-194418-171
1.6944
90-194418-172
1.7671
90-194418-173
1.9175
90-194418-174
2.0739
90-194418-175
2.2365
90-194418-176
2.4053
90-194418-177
2.5802
90-194418-178
!
WARNING
UL Listed and FM Approved 360 Degree Nozzles Area (in2) 1/2" NPT
3/4" NPT
1" NPT
0.0460
90-194423-201
0.0475
90-194423-202
0.0491
90-194423-203
0.0519
90-194423-204
0.0535
90-194423-205
0.0554
90-194423-206
0.0603
90-194423-207
0.0620
90-194423-208
0.0661
90-194423-209
0.0716
90-194423-210
0.0767
90-194423-211
0.0784
90-194423-212
0.0845
90-194423-213
0.0866
90-194423-214
0.0928
90-194423-215
0.0951
90-194423-216
0.1014
90-194423-217
0.1064
90-194423-218
0.1116
90-194423-219
90-194424-219
0.1170
90-194423-220
90-194424-220
0.1238
90-194423-221
90-194424-221
0.1296
90-194423-222
90-194424-222
0.1340
90-194423-223
90-194424-223
0.1398
90-194423-224
90-194424-224
0.1503
90-194423-225
90-194424-225
0.1612
90-194423-226
90-194424-226
0.1726
90-194423-227
90-194424-227
0.1843
90-194423-228
90-194424-228
90-194425-228
0.1963
90-194423-229
90-194424-229
90-194425-229
1-1/4" NPT
1-1/2" NPT
2" NPT
UL Listed and FM Approved 360 Degree Nozzles Area (in2) 1/2" NPT
3/4" NPT
1" NPT
0.2088
90-194423-230
90-194424-230
90-194425-230
0.2216
90-194423-231
90-194424-231
90-194425-231
0.2349
90-194423-232
90-194424-232
90-194425-232
0.2485
90-194424-233
90-194425-233
0.2625
90-194424-234
90-194425-234
0.2769
90-194424-235
90-194425-235
0.2917
90-194424-236
90-194425-236
0.3068
90-194424-237
90-194425-237
90-194426-237
0.3223
90-194424-238
90-194425-238
90-194426-238
0.3382
90-194424-239
90-194425-239
90-194426-239
0.3546
90-194424-240
90-194425-240
90-194426-240
0.3883
90-194424-241
90-194425-241
90-194426-241
0.4058
90-194424-242
90-194425-242
90-194426-242
0.4236
90-194424-243
90-194425-243
90-194426-243
90-194427-243
0.4418
90-194425-244
90-194426-244
90-194427-244
0.4604
90-194425-245
90-194426-245
90-194427-245
0.4793
90-194425-246
90-194426-246
90-194427-246
0.5185
90-194425-247
90-194426-247
90-194427-247
0.5386
90-194425-248
90-194426-248
90-194427-248
0.5592
90-194425-249
90-194426-249
90-194427-249
0.5801
90-194425-250
90-194426-250
90-194427-250
0.6230
90-194425-251
90-194426-251
90-194427-251
0.6450
90-194425-252
90-194426-252
90-194427-252
0.6903
90-194425-253
90-194426-253
90-194427-253
90-194428-253
0.7135
90-194426-254
90-194427-254
90-194428-254
0.7611
90-194426-255
90-194427-255
90-194428-255
0.7854
90-194426-256
90-194427-256
90-194428-256
0.8352
90-194426-257
90-194427-257
90-194428-257
0.8608
90-194426-258
90-194427-258
90-194428-258
0.9129
90-194426-259
90-194427-259
90-194428-259
0.9666
90-194426-260
90-194427-260
90-194428-260
1-1/4" NPT
1-1/2" NPT
2" NPT
UL Listed and FM Approved 360 Degree Nozzles 2
Area (in ) 1/2" NPT
3/4" NPT
1" NPT
1-1/4" NPT
1-1/2" NPT
2" NPT
1.0218
90-194426-261
90-194427-261
90-194428-261
1.0499
90-194426-262
90-194427-262
90-194428-262
1.1075
90-194426-263
90-194427-263
90-194428-263
1.1667
90-194426-264
90-194427-264
90-194428-264
1.2272
90-194427-265
90-194428-265
1.2892
90-194427-266
90-194428-266
1.3530
90-194427-267
90-194428-267
1.4183
90-194427-268
90-194428-268
1.4849
90-194427-269
90-194428-269
1.5530
90-194427-270
90-194428-270
1.6230
90-194427-271
90-194428-271
1.6944
90-194428-272
1.7671
90-194428-273
1.9175
90-194428-274
2.0739
90-194428-275
2.2365
90-194428-276
2.4053
90-194428-277
2.5802
90-194428-278
UL Listed and FM Approved 180 Degree Noz zles Area (in2) 1/2" NPT
3/4" NPT
1" NPT
0.0460
90-194413-201
0.0475
90-194413-202
0.0491
90-194413-203
0.0519
90-194413-204
0.0535
90-194413-205
0.0554
90-194413-206
0.0603
90-194413-207
0.0620
90-194413-208
0.0661
90-194413-209
0.0716
90-194413-210
0.0767
90-194413-211
0.0784
90-194413-212
0.0845
90-194413-213
0.0866
90-194413-214
0.0928
90-194413-215
0.0951
90-194413-216
0.1014
90-194413-217
0.1064
90-194413-218
0.1116
90-194413-219
90-194414-219
0.1170
90-194413-220
90-194414-220
0.1238
90-194413-221
90-194414-221
0.1296
90-194413-222
90-194414-222
0.1340
90-194413-223
90-194414-223
0.1398
90-194413-224
90-194414-224
0.1503
90-194413-225
90-194414-225
0.1612
90-194413-226
90-194414-226
0.1726
90-194413-227
90-194414-227
0.1843
90-194413-228
90-194414-228
90-194415-228
0.1963
90-194413-229
90-194414-229
90-194415-229
1-1/4" NPT
1-1/2" NPT
2" NPT
UL Listed and FM Approved 180 Degree Nozz les Area (in2) 1/2" NPT
3/4" NPT
1" NPT
0.2088
90-194413-230
90-194414-230
90-194415-230
0.2216
90-194413-231
90-194414-231
90-194415-231
0.2349
90-194413-232
90-194414-232
90-194415-232
0.2485
90-194414-233
90-194415-233
0.2625
90-194414-234
90-194415-234
0.2769
90-194414-235
90-194415-235
0.2917
90-194414-236
90-194415-236
0.3068
90-194414-237
90-194415-237
90-194416-237
0.3223
90-194414-238
90-194415-238
90-194416-238
0.3382
90-194414-239
90-194415-239
90-194416-239
0.3546
90-194414-240
90-194415-240
90-194416-240
0.3883
90-194414-241
90-194415-241
90-194416-241
0.4058
90-194414-242
90-194415-242
90-194416-242
0.4236
90-194414-243
90-194415-243
90-194416-243
90-194417-243
0.4418
90-194415-244
90-194416-244
90-194417-244
0.4604
90-194415-245
90-194416-245
90-194417-245
0.4793
90-194415-246
90-194416-246
90-194417-246
0.5185
90-194415-247
90-194416-247
90-194417-247
0.5386
90-194415-248
90-194416-248
90-194417-248
0.5592
90-194415-249
90-194416-249
90-194417-249
0.5801
90-194415-250
90-194416-250
90-194417-250
0.6230
90-194415-251
90-194416-251
90-194417-251
0.6450
90-194415-252
90-194416-252
90-194417-252
0.6903
90-194415-253
90-194416-253
90-194417-253
90-194418-253
0.7135
90-194416-254
90-194417-254
90-194418-254
0.7611
90-194416-255
90-194417-255
90-194418-255
0.7854
90-194416-256
90-194417-256
90-194418-256
0.8352
90-194416-257
90-194417-257
90-194418-257
0.8608
90-194416-258
90-194417-258
90-194418-258
0.9129
90-194416-259
90-194417-259
90-194418-259
0.9666
90-194416-260
90-194417-260
90-194418-260
1-1/4" NPT
1-1/2" NPT
2" NPT
UL Listed and FM Approved 180 Degree Noz zles Area (in2) 1/2" NPT
3/4" NPT
1" NPT
1-1/4" NPT
1-1/2" NPT
2" NPT
1.0218
90-194416-261
90-194417-261
90-194418-261
1.0499
90-194416-262
90-194417-262
90-194418-262
1.1075
90-194416-263
90-194417-263
90-194418-263
1.1667
90-194416-264
90-194417-264
90-194418-264
1.2272
90-194417-265
90-194418-265
1.2892
90-194417-266
90-194418-266
1.3530
90-194417-267
90-194418-267
1.4183
90-194417-268
90-194418-268
1.4849
90-194417-269
90-194418-269
1.5530
90-194417-270
90-194418-270
1.6230
90-194417-271
90-194418-271
1.6944
90-194418-272
1.7671
90-194418-273
1.9175
90-194418-274
2.0739
90-194418-275
2.2365
90-194418-276
2.4053
90-194418-277
2.5802
90-194418-278
MATERIAL SAFETY DATA SHEET MSDS Number: 00057 Product Name: FM-200
Effective Date: 04/20/2001 Page: 1 of 7
SECTION I - CHEMICAL PRODUCT AND COMPANY I DENTIFICATION Product Name:
FM-200
Great L akes Chemical Corporati on Manufacturer: P.O. Box 2200 West L afayette Address: City: I ndiana 47996-2200 State: Zip: Emergency Telephone Number: 1-800-949-5167 1-765-497-6100 1-765-497-6123 Information Telephone Number: Fax: Chemtrec Phone: 1-800-424-9300 04/20/2001 4/7/98 Effective Date: Supercede Date: Regulatory Affairs Department/Gr eat L akes Chemical Corporation MSDS Prepared By: 1,1,1,2,3,3,3-H eptafl uoropropane, 2H-H eptafl uoropropane Synonyms: Fir e extinguishing, fire suppression, explosion suppression and inerti ng agent Product Use: 1,1,1,2,3,3,3-H eptafl uoropropane Chemical Name: H alogenated alkane Chemical Family: Addi ti onal I nfor m ati on
No information available
SECTION II - C OMPOSITION/INFORMATION ON I NGREDIENTS INGREDIENT NAME 1,1,1,2,3,3,3-Heptafluoropropane
CAS NO. 431890
% > or = 99.9
EXPOSURE L IMITS Y (Hazardous) Not established (OSHA PEL TWA) Not established (OSHA PEL STEL) Not established (OSHA PE L CE I L ) Not established (ACGI H TL V TWA) Not established (ACGIH TLV STEL) Not established (ACGIH TLV CEIL)
*I ndented chemicals are components of previous ingredient. Addi ti onal I nfor m ati on
No information available
SECTION III - H AZARDS I DENTIFICATION Emergency Overview:
Relevant Routes of Exposure: Signs and Symptoms of Overexposure:
Colorless gas Odorless Direct eye or skin contact with the liquid or cold gas can cause chilling or possibly frostbite of exposed tissues. May cause centr al nervous system effects. I nhalati on of hi gh concentrations can be harmful or fatal due to oxygen deprivation and/or heart irregularities. Inhalation Symptoms similar to oxygen deprivation (headache, nausea, dizziness or loss of consciousness) may result from overexposure by inhalation. Heart irregularities such as irregular pulse or heart palpitations may indicate cardiac sensitivity. Cold, white or discolored skin or i n severe cases blistering, can be a sign of frostbite caused by cold liquids or gases.
MATERIAL SAFETY DATA SHEET MSDS Number: 00057 Product Name: FM-200
Effective Date: 04/20/2001 Page: 2 of 7
SECTION III - H AZARDS I DENTIFICATION Medical Conditions Generally Aggravated By Exposure:
Persons with preexisting cardiac, respiratory, or central nervous system disorders may be more susceptible to effects of an overexposure. The use of epinephrine or si milar compounds can increase susceptibility to heart irregularities caused by excessive exposure to these types of compounds. See Section XI for additional information. Potential Health Effects: Direct eye contact with the liquid or cold gas can cause chilling or Eyes: possibly frostbite of exposed tissues. Direct skin contact with the liquid or cold gas can cause chilling or Skin: possibly frostbite of exposed tissues. Not expected to be a hazard in normal industrial use. Ingestion: I nhalati on of hi gh concentrations can be harmful or fatal due to Inhalation: oxygen deprivation and/or heart irr egulari ties (arrhythmias). Misuse of the product by deliberately inhali ng high concentrations of this gas could cause death without warning. None known Chronic Health Effects: Carcinogenicity: No No NTP: ACGIH: No No IARC: OTHER: No OSHA: Addi ti onal I nfor m ati on
No information available
SECTION IV - F IRST AID MEASURES Eyes: Skin: Ingestion: Inhalation:
Antidotes: Notes to Physicians and/or Protection for First-Aiders:
Flush with water. Get medical attention. Flush with water; if frostbite occurs get medical attention. No information available Remove person to fresh air; if not breathing, give artificial respirati on. I f breathing is diffi cult, give oxygen. Get medical attention. No information available The use of epinephrine or similar compounds can increase susceptibility to heart irregularities caused by excessive exposure to these types of compounds. Addi ti onal I nfor m ati on
No information available
SECTION V - F IRE FIGHTING MEASURES Flammable Limits in Air (% by Volume): Flash Point: Autoignition Temperature: Extinguishing Media: Fire Fighting Instructions:
Not applicable Nonflammable gas Not available All conventional media are suitable. K eep cyli nders cool with a water spray applied from a safe distance. Use a self-contained breathing apparatus if containers rupture or release under fire conditi ons. Do not allow reentry into areas where this material has been released without first ventilating to remove products of combustion/decomposition.
MATERIAL SAFETY DATA SHEET MSDS Number: 00057 Product Name: FM-200
Effective Date: 04/20/2001 Page: 3 of 7
SECTION V - F IRE FIGHTING MEASURES Unusual Fire and Explosion Hazards:
Flammability Classification: Known or Anticipated Hazardous Products of Combustion:
Although containers of our product are provided with pressure and temperature relief devices, containers can rupture if exposed to localized heat. Thermal decomposition will generate toxic and corrosive gases. Nonflammable gas Decomposition by elevated temperatures (fire conditions, glowing metal surfaces) may generate hazardous decomposition products common to other CF Cs, HCF Cs or H BF Cs. These can include hydrogen fluoride (ACGI H TL V = 3 ppm), carbon monoxide, carbon dioxide and others. Addi ti onal I nfor m ati on
No information available
SECTION VI - ACCIDENTAL RELEASE MEASURES Acci dental Release Measures:
Personal Precautions: Environmental Precautions:
E vacuate the area and venti late. Do not enter areas where high concentrations may exist (especially confined or poorly ventilated areas) without appropriate protective equipment including a selfcontained breathi ng apparatus. See Section VIII. No information available Addi ti onal I nfor m ati on
No information available
SECTION VII - H ANDLING AND STORAGE Handling:
Storage:
Other Precautions:
Use the same type of precauti ons as would be used in handling any cryogenic gas. Protect contai ner from damage. Handle in wellventilated areas. When this materi al is used as a firefighting agent in fixed or portable extinguishing systems, follow manufacturer's instructions for operation, inspection, maintenance and repair of the system. Store in a cool, dry, well-ventilated area away from incompatible materials. K eep container tightly closed. No information available Addi ti onal I nfor m ati on
No information available
SECTION VIII - E XPOSURE CONTROLS/PERSONAL PROTECTION Engineering Controls: Ventilation R equirements:
No information available Use local ventilation to minimize exposure to gas. Use mechanical ventilation for general area control.
Personal Protective E quipment: Chemical splash goggles when handling li quid Eye/Face Protection: Use lined neoprene gloves if handling liquid. Skin Protection: Clothing designed to minimize skin contact Wear a NI OSH /MSH A approved self-contained breathing apparatus in Respiratory Protection: emergency situati ons.
MATERIAL SAFETY DATA SHEET MSDS Number: 00057 Product Name: FM-200
Effective Date: 04/20/2001 Page: 4 of 7
SECTION VIII - E XPOSURE CONTROLS/PERSONAL PROTECTION Consult the OSHA respiratory protection information located at 29CF R 1910.134 and the Ameri can National Standard Institute's Practices of Respiratory Protection Z88.2.
Other Protective Clothing or Equipment: Exposure Guidelines: Work Hygienic Practices:
No information available See Section I I . Wash thoroughly after handling. Wash contaminated clothing before reuse. Make sure piping is empty before doing maintenance work. Addi ti onal I nfor m ati on
No information available
SECTION IX - PHYSICAL & C HEMICAL PROPERTIES Appearance: Boiling Point: Bulk Density: Color: Decomposition Temperature: Evaporation Rate: Freezing Point: Heat Value: Melting Point:
Colorless gas -16.4 degrees C (3 degrees F ) Not available Colorless Not available Not available
Molecular/Chemical Formula: Molecular Weight:
Not available Not available -131 degrees C (-204 degrees F ) C3HF7 170
Octanol/Water Partition Coefficient: Odor:
Not available Odorless
Odor Threshold:
Not available
Particle Size:
Percent Volatile: pH Value:
Not available Not available
pH Concentration: Physical State: Reactivity in Water: Saturated Vapor Concentration: Softening Point: Solubility in Water: Specific Gravity or Density (Water=1): Vapor Density: Vapor Pressure:
Not available Gas Not water reactive
Viscosity:
Not available
Volatile Organic Compounds: Water/Oil Distribution Coefficient: Weight Per Gallon:
Not available Not available 260 mg/L 1.46 6.04 58.8 psia at 70 degrees F (21 degrees C) Not available
Not available Not available Not available
Addi ti onal I nfor m ati on
No information available
SECTION X - STABILI TY AND REACTIVITY Stability: Conditions to Avoid: Incompatibility With Other Materials:
Hazardous Decomposition Products:
Hazardous Polymerization: Conditions to Avoid:
Stable under normal conditions of handling and use. None Powdered metals (ex. Al, Mg, or Zn) and strong alkalis, oxidizers or reducing agents are not compatible with this and most other halogenated organic compounds. Thermal decomposition may produce the following: Hydrogen fluoride Carbon monoxide and carbon dioxide Will not occur None
MATERIAL SAFETY DATA SHEET MSDS Number: 00057 Product Name: FM-200
Effective Date: 04/20/2001 Page: 5 of 7
SECTION X - STABILI TY AND REACTIVITY Addi ti onal I nfor m ati on
No information available
SECTION XI - T OXICOLOGICAL INFORMATION VALUE (LD50 OR LC50) >788,696 ppm/4H
ANIMAL Rat
R OUTES Acute I nhalation
COMPONENTS 1,1,1,2,3,3,3-Heptafluoropropane
Toxicological Information: The human health hazards of this product are expected to be similar to other li quefied gases including N2, CO2, CFCs, HCF Cs, and HBFCs. Therefore, direct eye or skin contact with the liquid or cold gas can cause chilli ng or possibly frostbite of exposed tissues. I nhalation of high concentr ations can be harmful or fatal due to oxygen deprivation and/or heart ir regularities (arrhythmias). Misuse of the product by deli berately inhali ng high concentrations of thi s gas could cause death without warning. Persons with preexisti ng cardiac or central nervous system disorders may be more susceptible to effects of an overexposure. When tested with and without metabolic activation over a concentration range of 43.9-93.5%, heptafluoropropane was not mutagenic in S. typhimuri um. Neither toxicity nor mutagenicity was observed in a mouse lymphoma assay when heptafluoropropane was tested to a concentration of 56.8%. Neither toxicity nor an increase in micronuclei was observed in mice exposed to 10.5% heptafluoropropane. Therefore, there is no evidence that heptafluoropropane is capable of inducing gene or chromosomal mutati ons in vitro or chromosomal effects in vivo. I n other studi es, heptafl uoropropane did not show genotoxicity or cytotoxicity. Animal studies have found the rat 4 hour L C50 to be >788,696 ppm (~80%), the highest level tested. A cardiac sensitizati on study in dogs found the No Observable Adverse Effect L evel (NOAEL ) to be 9.0%. The L owest Observable Adverse E ffect Level (L OAEL ) for this study was reported to be 10.5%. A 90 day inhalation study did not find any exposure related effects at 105,000 ppm (10.5% vol./vol.), the highest level tested. I nhalati on studies looking for developmental effects on pregnant rabbits and rats or their offspring did not show any exposure related effects at the highest concentrations tested (105,000 ppm). Addi ti onal I nfor m ati on
No information available
SECTION XII - E COLOGICAL INFORMATION Ecological Information:
No information available Addi ti onal I nfor m ati on
No information available
SECTION XIII - D ISPOSAL CONSIDERATIONS Disposal Considerations:
Non-contaminated product is reclai mable. Contact Great Lakes Chemical C orporation for i nformation. Otherwise, dispose of waste in an approved chemical incinerator equipped with a scrubber as allowed by current L ocal, State/Province, Federal/Canadian laws and regulations. Addi ti onal I nfor m ati on
No information available
MATERIAL SAFETY DATA SHEET MSDS Number: 00057 Product Name: FM-200
Effective Date: 04/20/2001 Page: 6 of 7
SECTION XIV - T RANSPORT INFORMATION Proper Shipping Name: Hazard Class: Packing Group: Special Provisions: Non-Bulk Packaging: Passenger Air/Rail Limit: Vessel Stowage: Reportable Quantity: Proper Shipping Name: Hazard Class: Subsidiary Risk: Hazard Labels: Air Passenger Limit Per Package: Air Cargo Limit Per Package: Proper Shipping Name: Hazard Class: Packing Group: Medical First Aid Guide Code:
U.S. DOT Heptafluoropropane 2.2 ID Number: N /A Labels: N /A Packaging Exceptions: 304 Bulk Packaging: 75 kg Air Cargo Li mit: A Other Stowage: N /A AIR - ICAO OR IATA Heptafluoropropane 2.2 ID Number: N /A Packing Group: Nonflammable gas Packing Instructions: Packing Instruction 75 kg Cargo: Special Provisions 150 kg Code: WATER - IMDG Heptafluoropropane 2.2 ID Number: N /A Subsidiary Risk:
UN3296 Nonflammable gas 306 314, 315 150 kg N /A
UN3296 N /A 200 200 N /A
UN3296 N /A
350 Addi ti onal I nfor m ati on
EmS No. 2-09
SECTION XV - R EGULATORY INFORMATION U.S. Federal Regulations: The components of this product are either on the TSCA I nventory or exempt (i.e. impurities, a polymer complying with the exemption rule at 40 CF R 723.250) from the I nventory. State Regulations: None known International Regulations: Thi s material (or each component) is listed on the following inventories: Canada - NDSL EU - EINECS Australia - AICS J apan - EN CS K orea - ECL China - List I Canadian WHM I S H azard Cl ass and Division = A. SARA Hazards: Yes Acute: No Reactive: No Pressure:
Chronic: Fire:
No No
Addi ti onal I nfor m ati on
The above regulatory information represents only selected regulations and is not meant to be a complete li st.
MATERIAL SAFETY DATA SHEET MSDS Number: 00057 Product Name: FM-200
Effective Date: 04/20/2001 Page: 7 of 7
SECTION XVI - OTHER INFORMATION NFP A C odes: Health: Reactivity: HMIS Codes: Health: Reactivity: Label Statements: Other Information:
1
0 1 0
0 Flammability: 0 Other: * indicates chronic health hazard. 0 Flammability: X Protection: Not available Abbreviations: (L ) = L oose bulk density in g/ml L OE C = L owest observed effect concentration MATC = Maximum acceptable toxicant concentration NA = Not available N/A = Not applicable NL = Not li mited NOAEL = No observable adverse effect level NOE C = No observed effect concentration NOE L = No observable effect level NR = Not rated (P) = Packed bulk density in g/ml PNOC = Particulates Not Otherwise Classified PNOR = Parti culates Not Otherwise Regulated REL = Recommended exposure limit TS = Tr ade secret Addi ti onal I nfor m ati on
I nformation on thi s form is furni shed solely for the purpose of compliance with OSH A's Hazard Communication Standard, 29CF R 1910.1200 and The Canadian E nvir onmental Protection Act, Canada Gazette Par t I I , Vol. 122, No. 2 and shall not be used for any other purpose. Revision I nformation: Section II - Purity Section XV - I nternational i nventori es
Product: Nitrogen
P-4631-F
Date: October 2001
Praxair Material Safety Data Sheet 1. Chemical Product and Company Identification Product Name: Nitrogen, compressed (MSDS No. P-4631-F)
Trade Name: Nitrogen
Chemical Name: Nitrogen
Synonyms: Dinitrogen
Formula: N2
Chemical Family: Permanent gas
1-800-645-4633* Company Name: Praxair, Inc. Emergencies: 39 Old Ridgebury Road CHEMTREC: 1-800-424-9300* 1-800-PRAXAIR Danbury, CT 06810-5113 Routine: * Call emergency numbers 24 hours a day only for spills, leaks, fire, exposure, or accidents involving this product. For routine information, contact your supplier, Praxair sales representative, or call 1-800-PRAXAIR (1-800-772-9247).
Telephone:
2. Composition/Information on Ingredients See section 16 for important information about mixtures.
CAS INGREDIENT NUMBER
CONCENTRATION
OSHA PEL
Nitrogen 7727-37-9 >99%* None currently established * The symbol > means “greater than”; the symbol <, “less than.”
ACGIH TLV-TWA (2001) Simple asphyxiant
3. Hazards Identification
EMERGENCY OVERVIEW CAUTION! High-pressure gas. Can cause rapid suffocation. May cause dizziness and drowsiness. Self-contained breathing apparatus may be required by rescue workers. Odor: None THRESHOLD LIMIT VALUE: TLV-TWA, simple asphyxiant (ACGIH, 2001). TLV-TWAs should be used as a guide in the control of health hazards and not as fine lines between safe and dangerous concentrations.
Copyright © 1980, 1983, 1985, 1992, 1997, 2001, Praxair Technology, Inc. All rights reserved. Revised
Page 1 of 8
Product: Nitrogen
P-4631-F
Date: October 2001
EFFECTS OF A SINGLE (ACUTE) OVEREXPOSURE: INHALATION –Asphyxiant. Effects are due to lack of oxygen. Moderate concentrations may cause headache, drowsiness, dizziness, excitation, excess salivation, vomiting, and unconsciousness. Lack of oxygen can kill. SKIN CONTACT –No harm expected. SWALLOWING –An unlikely route of exposure. This product is a gas at normal temperature and pressure. EYE CONTACT –No harm expected. EFFECTS OF REPEATED (CHRONIC) OVEREXPOSURE: No harm expected. OTHER EFFECTS OF OVEREXPOSURE: Asphyxiant. Lack of oxygen can kill. MEDICAL CONDITIONS AGGRAVATED BY OVEREXPOSURE: The toxicology and the physical and chemical properties of nitrogen suggest that overexposure is unlikely to aggravate existing medical conditions. SIGNIFICANT LABORATORY DATA WITH POSSIBLE RELEVANCE TO HUMAN HEALTH HAZARD EVALUATION: None known. CARCINOGENICITY: Nitrogen is not listed by NTP, OSHA, or IARC.
4. First Aid Measures INHALATION: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, qualified personnel may give oxygen. Call a physician. SKIN CONTACT: Flush with water. If discomfort persists, seek medical attention. SWALLOWING: An unlikely route of exposure. This product is a gas at normal temperature and pressure. EYE CONTACT: Flush eyes thoroughly with water. Hold the eyelids open and away from the eyeballs to ensure that all surfaces are flushed thoroughly. If discomfort persists, seek medical attention. : There is no specific antidote. Treatment of overexposure should be directed NOTES TO PH YSI CIAN
at the control of symptoms and the clinical condition of the patient.
5. Fire Fighting Measures FLASH POINT (test method):
Not applicable
AUTOIGNITION TEMPERATURE:
Not applicable
FLAMMABLE LIMITS IN AIR, % by volume: LOWER: Not applicable UPPER: Not applicable EXTINGUISHING MEDIA: Nitrogen cannot catch fire. Use media appropriate for surrounding fire. SPECIAL FIRE FIGHTING PROCEDURES: CAUTION! High-pressure gas. Asphyxiant. Lack of oxygen can kill. Evacuate all personnel from danger area. Immediately deluge cylinders with water from maximum distance until cool; then move them away from fire area if without risk. Shut off flow if you can do so without risk. Self-contained breathing apparatus may be required by rescue workers. (See section 16.) On-site fire brigades must comply with OSHA 29 CFR 1910.156.
Page 2 of 8
Product: Nitrogen
P-4631-F
Date: October 2001
UNUSUAL FIRE AND EXPLOSION HAZARDS: Heat of fire can build pressure in cylinder and cause it to rupture. No part of cylinder should be subjected to a temperature higher than 125°F (52°C). Nitrogen cylinders are equipped with a pressure relief device. (Exceptions may exist where authorized by DOT.) HAZARDOUS COMBUSTION PRODUCTS: None known.
6. Accidental Release Measures STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED: CAUTION! High-pressure gas. Asphyxiant. Lack of oxygen can kill. Evacuate all personnel from danger area. Use self-contained breathing apparatus where needed. Shut off flow if you can do so without risk. Ventilate area or move cylinder to a well-ventilated area. Test for sufficient oxygen, especially in confined spaces, before allowing reentry. WASTE DISPOSAL METHOD: Prevent waste from contaminating the surrounding environment. Keep personnel away. Discard any product, residue, disposable container, or liner in an environmentally acceptable manner, in full compliance with federal, state, and local regulations. If necessary, call your local supplier for assistance.
7. Handling and Storage PRECAUTIONS TO BE TAKEN IN STORAGE: Store and use with adequate ventilation. Firmly secure cylinders upright to keep them from falling or being knocked over. Screw valve protection cap firmly in place by hand. Store only where temperature will not exceed 125 F (52 C). Store full and empty cylinders separately. Use a first-in, first-out inventory system to prevent storing full cylinders for long periods. °
°
PRECAUTIONS TO BE TAKEN IN HANDLING: Protect cylinders from damage. Use a suitable hand truck to move cylinders; do not drag, roll, slide, or drop. Never attempt to lift a cylinder by its cap; the cap is intended solely to protect the valve. Never insert an object (e.g., wrench, screwdriver, pry bar) into cap openings; doing so may damage the valve and cause a leak. Use an adjustable strap wrench to remove over-tight or rusted caps. Open valve slowly. If valve is hard to open, discontinue use and contact your supplier. For other precautions in using nitrogen, see section 16.
For additional information on storage and handling, refer to Compressed Gas Association (CGA) pamphlet P-1, Safe Handling of Compressed Gases in Containers, available from the CGA. Refer to section 16 for the address and phone number along with a list of other available publications.
8. Exposure Controls/Personal Protection VENTILATION/ENGINEERING CONTROLS: LOCAL EXHAUST –Use a local exhaust system, if necessary, to prevent oxygen deficiency. MECHANICAL (general) –General exhaust ventilation may be acceptable if it can maintain an adequate supply of air. SPECIAL –None OTHER –None RESPIRATORY PROTECTION: None required under normal use. Air-supplied respirators must be used in confined spaces or in an oxygen-deficient atmosphere. Respiratory protection must conform to OSHA rules as specified in 29 CFR 1910.134. SKIN PROTECTION: Wear work gloves when handling cylinders.
Page 3 of 8
Product: Nitrogen
P-4631-F
Date: October 2001
EYE PROTECTION: Wear safety glasses when handling cylinders. Select in accordance with OSHA 29 CFR 1910.133. OTHER PROTECTIVE EQUIPMENT: Metatarsal shoes for cylinder handling. Select in accordance with OSHA 29 CFR 1910.132 and 1910.133. Regardless of protective equipment, never touch live electrical parts.
9. Physical and Chemical Properties MOLECULAR WEIGHT:
28.01
SPECIFIC GRAVITY (air = 1) at 70°F (21.1°C) and 1 atm :
0.967
GAS DENSITY at 70°F (21.1°C) and 1 atm :
0.072 lb/ft (1.153 kg/m )
SOLUBILITY IN WATER, vol/vol at 32°F (0°C) and 1 atm :
0.023
PERCENT VOLATILES BY VOLUME:
100
BOILING POINT at 1 atm:
-320.44°F (-195.80°C)
MELTING POINT at 1 atm:
-345.8°F (-209.9°C)
3
3
APPEARANCE, ODOR, AND STATE: Colorless, odorless, tasteless gas at normal temperature and pressure.
10. Stability and Reactivity STABILITY: Unstable Stable INCOMPATIBILITY (materials to avoid): None known. HAZARDOUS DECOMPOSITION PRODUCTS: None known. HAZARDOUS POLYMERIZATION: May Occur Will Not Occur CONDITIONS TO AVOID: Under certain conditions, nitrogen can react violently with lithium, neodymium, titanium, and magnesium to form nitrides. At high temperature it can also combine with oxygen and hydrogen.
11. Toxicological Information Nitrogen is a simple asphyxiant.
12. Ecological Information No adverse ecological effects expected. Nitrogen does not contain any Class I or Class II ozone-depleting chemicals. Nitrogen is not listed as a marine pollutant by DOT.
13. Disposal Considerations WASTE DISPOSAL METHOD: Do not attempt to dispose of residual or unused quantities. Return cylinder to supplier. For emergency disposal, secure cylinder in a well-ventilated area or outdoors, and then slowly discharge gas to the atmosphere.
Page 4 of 8
Product: Nitrogen
P-4631-F
Date: October 2001
14. Transport Information DOT/IMO SHIPPING NAME: Nitrogen, compressed HAZARD CLASS:
2.2
IDENTIFICATION PRODUCT UN 1066 RQ: None NUMBER:
SHIPPING LABEL(s):
NONFLAMMABLE GAS
PLACARD (when required):
NONFLAMMABLE GAS
SPECIAL SHIPPING INFORMATION: Cylinders should be transported in a secure position, in a well-ventilated vehicle. Cylinders transported in an enclosed, nonventilated compartment of a vehicle can present serious safety hazards.
Shipment of compressed gas cylinders that have been filled without the owner's consent is a violation of federal law [49 CFR 173.301(b)].
15. Regulatory Information The following selected regulatory requirements may apply to this product. Not all such requirements are identified. Users of this product are solely responsible for compliance with all applicable federal, state, and local regulations. U.S. FEDERAL REGULATIONS: EPA (ENVIRONMENTAL PROTECTION AGENCY) CERCLA: COMPREHENSIVE ENVIRONMENTAL RESPONSE, COMPENSATION, AND LIABILITY ACT OF 1980 (40 CFR Parts 117 and 302): Reportable Quantity (RQ): None SARA: SUPERFUND AMENDMENT AND REAUTHORIZATION ACT: SECTIONS 302/304: Require emergency planning based on Threshold Planning Quantity (TPQ) and release reporting based on Reportable Quantities (RQ) of Extremely Hazardous Substances (EHS) (40 CFR Part 355): Threshold Planning Quantity (TPQ): None EHS RQ (40 CFR 355): None SECTIONS 311/312: Require submission of MSDSs and reporting of chemical inventories with identification of EPA hazard categories. The hazard categories for this product are as follows: IMMEDIATE: No DELAYED: No
PRESSURE: Yes REACTIVITY: No FIRE: No
SECTION 313: Requires submission of annual reports of release of toxic chemicals that appear in 40 CFR Part 372.
Nitrogen does not require reporting under Section 313.
Page 5 of 8
Product: Nitrogen
P-4631-F
Date: October 2001
40 CFR 68: RISK MANAGEMENT PROGRAM FOR CHEMICAL ACCIDENTAL RELEASE PREVENTION: Requires development and implementation of risk management programs at facilities that manufacture, use, store, or otherwise handle regulated substances in quantities that exceed specified thresholds.
Nitrogen is not listed as a regulated substance. TSCA: TOXIC SUBSTANCES CONTROL ACT: Nitrogen is listed on the TSCA inventory. OSHA: OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION: 29 CFR 1910.119: PROCESS SAFETY MANAGEMENT OF HIGHLY HAZARDOUS CHEMICALS: Requires facilities to develop a process safety management program based on Threshold Quantities (TQ) of highly hazardous chemicals.
Nitrogen is not listed in Appendix A as a highly hazardous chemical. STATE REGULATIONS: CALIFORNIA: Nitrogen is not listed by California under the SAFE DRINKING WATER AND TOXIC ENFORCEMENT ACT OF 1986 (Proposition 65). PENNSYLVANIA: Nitrogen is subject to the PENNSYLVANIA WORKER AND COMMUNITY RIGHT-TO-KNOW ACT (35 P.S. Sections 7301-7320).
16. Other Information Be sure to read and understand all labels and instructions supplied with all containers of this product. NOTE: The suitability of nitrogen as a component in underwater breathing gas mixtures is to be
determined by or under the supervision of personnel experienced in the use of underwater breathing gas mixtures and familiar with the physiological effects, methods employed, frequency and duration of use, hazards, side effects, and precautions to be taken. OTHER HAZARDOUS CONDITIONS OF HANDLING, STORAGE, AND USE: High-pressure gas. Use piping and equipment adequately designed to withstand pressures to be encountered. Gas can cause r apid suff ocation du e to oxygen defi ciency. Store and use with adequate ventilation. Close valve after each use; keep closed even when empty. Never wor k on a pressur i zed system. If there is a leak, close the cylinder valve. Blow the system down in a safe and environmentally sound manner in compliance with all federal, state, and local laws; then repair the leak . Never pl ace a compr essed gas cylin der where it may become par t of an electri cal cir cuit.
MIXTURES: When you mix two or more gases or liquefied gases, you can create additional, unexpected hazards. Obtain and evaluate the safety information for each component before you produce the mixture. Consult an industrial hygienist or other trained person when you evaluate the end product. Remember, gases and liquids have properties that can cause serious injury or death. HAZARD RATING SYSTEMS: NFPA RATINGS: HEALTH
=0
HMIS RATINGS: HEALTH
=0
FLAMMABILITY
=0
FLAMMABILITY
=0
REACTIVITY
=0
REACTIVITY
=0
SPECIAL
= SA (CGA recommends this to designate Simple Asphyxiant.)
Page 6 of 8
Product: Nitrogen
P-4631-F
Date: October 2001
STANDARD VALVE CONNECTIONS FOR U.S. AND CANADA: 0-3000 psig CGA-580 THREADED: 3001-5500 psig CGA-680 5001-7500 psig CGA-677 PIN-INDEXED YOKE:
0-3000 psig
ULTRA-HIGH-INTEGRITY CONNECTION: 0-3000 psig
CGA-960 (medical use) CGA-718
Use the proper CGA connections. DO NOT USE ADAPTERS. Additional limited-standard connections may apply. See CGA pamphlet V-1 listed below. Ask your supplier about free Praxair safety literature as referred to in this MSDS and on the label for this product. Further information about this product can be found in the following pamphlets published by the Compressed Gas Association, Inc. (CGA), 4221 Walney Road, 5th Floor, Chantilly, VA 20151-2923, Telephone (703) 788-2700. AV-1 G-10.1 P-1 P-9 P-14 SB-2 V-1 —
Safe Handling and Storage of Compressed Gases Commodity Specification for Nitrogen Safe Handling of Compressed Gases in Containers Inert Gases – Argon, Nitrogen, and Helium Accident Prevention in Oxygen-Rich, Oxygen-Deficient Atmospheres Oxygen-Deficient Atmospheres Compressed Gas Cylinder Valve Inlet and Outlet Connections Handbook of Compressed Gases, Third Edition
Page 7 of 8
Product: Nitrogen
P-4631-F
Date: October 2001
Praxair asks users of this product to study this MSDS and become aware of product hazards and safety information. To promote safe use of this product, a user should (1) notify employees, agents, and contractors of the information in this MSDS and of any other known product hazards and safety information, (2) furnish this information to each purchaser of the product, and (3) ask each purchaser to notify its employees and customers of the product hazards and safety information.
The opinions expressed herein are those of qualified experts within Praxair, Inc. We believe that the information contained herein is current as of the date of this Material Safety Data Sheet. Since the use of this information and the conditions of use of the product are not within the control of Praxair, Inc., it is the user’s obligation to determine the conditions of safe use of the product.
Praxair MSDSs are furnished on sale or delivery by Praxair or the independent distributors and suppliers who package and sell our products. To obtain current Praxair MSDSs for these products, contact your Praxair sales representative or local distributor or supplier. If you have questions regarding Praxair MSDSs, would like the form number and date of the latest MSDS, or would like the names of the Praxair suppliers in your area, phone or write the Praxair Call Center (Phone: 1-800-PRAXAIR; Address: Praxair Call Center, Praxair, Inc., PO Box 44, Tonawanda, NY 14151-0044). Praxair and the Flowing Airstream design are trademarks or registered trademarks of Praxair Technology, Inc. in the United States and other countries.
Praxair, Inc. 39 Old Ridgebury Road Danbury, CT 06810-5113 Printed in USA
Page 8 of 8
