LTE Radio Access, Rel. FDD-LTE 16A, Operating Documentation, Issue 01 FDD-LTE BTS Parameters DN09147584 Issue 06B Approval Date 2016-06-23
The information in this document applies solely to the hardware/software product (“Product”) specified herein, and only as specified herein. This document is intended for use by Nokia Solutions and Networks' customers (“You”) only, and it may not be used except for the purposes defined in the agreement between You and Nokia Solutions and Networks (“Agreement”) under which this document is distributed. No part of this document may be used, copied, reproduced, modified or transmitted in any form or means without the prior written permission of Nokia Solutions and Networks. If you have not entered into an Agreement applicable to the Product, or if that Agreement has expired or has been terminated, You may not use this document in any manner and You are obliged to return it to Nokia Solutions and Networks and destroy or delete any copies thereof. The document has been prepared to be used by professional and properly trained personnel, and You assume full responsibility when using it. Nokia Solutions and Networks welcome Your comments as part of the process of continuous development and improvement of the documentation. This document and its contents are provided as a convenience to You. Any information or statements concerning the suitability, capacity, fitness for purpose or performance of the Product are given solely on an “as is” and “as available” basis in this document, and Nokia Solutions and Networks reserves the right to change any such information and statements without notice. Nokia Solutions Networks has made all reasonable efforts to ensure that the content of this document is adequate and free of material errors and omissions, and Nokia Solutions and Networks will correct errors that You identify in this document. But, Nokia Solutions and Networks' total liability for any errors in the document is strictly limited to the correction of such error(s). Nokia Solutions and Networks does not warrant that the use of the software in the Product will be uninterrupted or error-free. NO WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF AVAILABILITY, ACCURACY, RELIABILITY, TITLE, NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS MADE IN RELATION TO THE CONTENT OF THIS DOCUMENT. IN NO EVENT WILL NOKIA SOLUTIONS AND NETWORKS BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO SPECIAL, DIRECT, INDIRECT, INCIDENTAL OR CONSEQUENTIAL OR ANY LOSSES, SUCH AS BUT NOT LIMITED TO LOSS OF PROFIT, REVENUE, BUSINESS INTERRUPTION, BUSINESS OPPORTUNITY OR DATA THAT MAY ARISE FROM THE USE OF THIS DOCUMENT OR THE INFORMATION IN IT, EVEN IN THE CASE OF ERRORS IN OR OMISSIONS FROM THIS DOCUMENT OR ITS CONTENT. This document is Nokia Solutions and Networks’ proprietary and confidential information, which may not be distributed or disclosed to any third parties without the prior written consent of Nokia Solutions and Networks. Nokia is a registered trademark of Nokia Corporation. Other product names mentioned in this document may be trademarks of their respective owners, and they are mentioned for identification purposes only. Copyright © 2015 Nokia Solutions and Networks. All rights reserved. Important Notice on Product Safety This product may present safety risks due to laser, electricity, heat, and other sources of danger. Only trained and qualified personnel may install, operate, maintain or otherwise handle this
distributed or disclosed to any third parties without the prior written consent of Nokia Solutions and Networks. Nokia is a registered trademark of Nokia Corporation. Other product names mentioned in this document may be trademarks of their respective owners, and they are mentioned for identification purposes only. Copyright © 2015 Nokia Solutions and Networks. All rights reserved. Important Notice on Product Safety This product may present safety risks due to laser, electricity, heat, and other sources of danger. Only trained and qualified personnel may install, operate, maintain or otherwise handle this product and only after having carefully read the safety information applicable to this product. The safety information is provided in the Safety Information section in the “Legal, Safety and Environmental Information” part of this document or documentation set. Nokia Solutions and Networks is continually striving to reduce the adverse environmental effects of its products and services. We would like to encourage you as our customers and users to join us in working towards a cleaner, safer environment. Please recycle product packaging and follow the recommendations for power use and proper disposal of our products and their components. If you should have questions regarding our Environmental Policy or any of the environmental services we offer, please contact us at Nokia Solutions and Networks for any additional information.
A, Operating
Product”) specified
ou”) only, and it may not Solutions and Networks may be used, copied, permission of Nokia e Product, or if that any manner and You copies thereof.
personnel, and You ur comments as part of
tion or statements ct are given solely on orks reserves the right works has made all of material errors and this document. But, limited to the correction software in the Product
UT NOT LIMITED TO RINGEMENT, RELATION TO THE NETWORKS BE ECT, INDIRECT, TED TO LOSS OF R DATA THAT MAY EN IN THE CASE OF
mation, which may not be a Solutions and
ned in this document ation purposes only.
sources of
e handle this
a Solutions and
ned in this document ation purposes only.
sources of
e handle this o this product.
al, Safety and
mental effects of its s to join us in working the recommendations
ronmental services we tion.
1. Introduction
The purpose of this document is to assist users in finding parameters, their meanings, specifications, and default values. Th managed objects and parameters are listed in alphabetical order.
2. How to read this excel report
The excel report provides a full information on the parameter dictionary. It shows the full set of parameter attributes includin the change information. The excel report consists of two main sections: - MO Class Tree - Parameter List
2. 1 MO Class Tree This section shows the full Managed Object Class tree with the names of classes. Rows are grouped into respective class levels for structured and convenient view. Use unfold (+) and fold (-) buttons in the left panel to browse the tree.
2.2 Parameter List This section shows the full parameter information including the following: - abbreviated names - managed objects - parent/child parameter relationships - default values - range and step - field descriptions - change information
2.2.1 Field descriptions Field descriptions are provided in the second row of Parameter List section. Use fold (-) and unfold (+) buttons on the left p to respectively hide and show the field descriptions. 2.2.2 Change information Change information is a part of Parameter List section and is available in the following ways:
1. Definition on whether the parameter is new, removed, changed, or has been moved to another location in the structure (f example, to another managed object class). That definition is provided in the following columns: - Changes between issues ... which shows the changes since the previous issue of the document. - Changes between releases ... which shows the changes since the latest issue of the document in the previous product release. If the cell is empty, the parameter is not changed, nor new, nor removed, nor moved. Note that removed parameters are listed in the very bottom and they are marked with red font. Filters are enabled for convenient browsing of the change categories.
2. Detailed change information showing the current and previous values of parameter attributes. That information is provide in the following columns:
-
in issue ... which shows the value in the previous issue of the document. - in release ... which shows value in the latest issue of the document in the previous product release.
The columns are grouped into attribute-specific sections for structured and convenient view. Use unfold (+) and fold (-) butt in the top bar to browse the attribute-specific change details. Use unfold all (2) and fold all (1) buttons on the left hand side the top bar to respectively show and hide the change details for the whole report.
Note that for all parameters except new and removed ones, the field values for previous issue and previous release are alw provided to show total history information. Additionally, the changed attributes of parameters are highlighted with grey color Highlights are enabled to specify whether there is a change between issues or releases.
Note that for all parameters except new and removed ones, the field values for previous issue and previous release are alw provided to show total history information. Additionally, the changed attributes of parameters are highlighted with grey color Highlights are enabled to specify whether there is a change between issues or releases.
cations, and default values. The
f parameter attributes including
grouped into respective class o browse the tree.
unfold (+) buttons on the left panel
ther location in the structure (for ns:
ment. ent in the previous product
t.
es. That information is provided
ent. the previous product release.
Use unfold (+) and fold (-) buttons buttons on the left hand side of
e and previous release are always are highlighted with grey color.
e and previous release are always are highlighted with grey color.
Managed Object Class Tree
MRBTS ANTL BBMOD POWERGROUP BBPOOL BTSSCL LCELL CAPCFG LNBTS ANR ANRPRL ANRPRW ANRPRX CADPR CAPLIML CRAN EXTHCELL CRGPR CTRLTS LTRACE MTRACE FTM AMGR LUAC BTOOTH CERTH ETHLK IPNO BFD BFDGRP IDNS IEIF IVIF IHCP INTP IPRM IPRT IPRTV6 MCAPP NTPS QOS RTPOL TWAMP IPSECC L2SWI OAMMD OAMMA OAMMEP OAMPRF PMTNL POE PPTT SECPRM SYNC
STPG TAC LTAC TOPB TOPF TOPP UNIT WIFICNF GTPU ISHPR LNADJ LNADJL LNADJG LNADJT LNADJW LNADJX LNCEL AMLEPR APUCCH CAPR CAREL CDFIM DRX GFIM GNFL IAFIM IFGDPR IFGPR IRFIM LNHOG LNHOH LNHOIF LNHOW LNHOX LNNEIH LNREL LNRELG LNRELW LNRELX MPUCCH NBIOT REDRT SDRX SIB SLMEAS UFFIM XPARAM LNCSG LNHENB LNMCE LNM3 MBSFN LNMME LNSENB MFBIPR MODPR MODIMP
MODRED MOPR MOIMP MORED PMRNL PMQAP PMRPQH PSGRP RIM SCTP SLCOMMPROF SLCOMMRES SLCOMMTX SLCOMMSYNC ULCOMP MHA PMCADM RET RMOD SECADM SFP SMOD GNSSE GNSSI SRCU TEST RFRST RFTHLD SFPRST TRBLCADM
Managed Object Class Name
Multiradio BTS Site Antenna Line parameters Baseband Module Power Group Baseband Pool LTE BTS radio specific configuration Local Cell LTE Capacity Configuration LTE Basestation Automatic Neighbor Relationship basic configuration Automatic Neighbor Relationship Profile LTE Automatic Neighbor Relationship Profile WCDMA Automatic Neighbor Relationship PRofile for 1XRTT Carrier Aggregation Default Profile Capacity Limitation Centralized Radio Access Network External Helper Cell Cell Resource Group Profile Trace Control Logged Cell Trace Session Cell Trace Session Flexi transport module Account Manager Local User Account Bluetooth Manager Certificate Handler Ethernet link interface IP Node Configuration BFD session Bidirectional Forwarding Detection Group DNS Access Plain Ethernet network interface VLAN interface DHCP access NTP Server Configuration Restricted mode configuration IP Routing Tables IPv6 Routing Tables Multicast Application NTP Frequency sync Quality of Service configuration Routing policy TWAMP session IPsec configuration Layer 2 Switch Maintenance Domain Maintenance Association Maintenance Association End Point Link OAM Profile Transport Performance Management Measurement Administration Power over Ethernet PDH physical section trail termination point Security parameter Clock Synchronization
Synchronization Protection Group Transport admission control Transport admission control for LTE ToP base MO ToP freq sync ToP Phase Sync Hardware Unit Integrated WiFi Configuration GPRS Tunnel Protocol User Plane parameters Downlink Interference Shaping Profile Neighbouring LTE BTS Neighbouring LTE BTS Cell Neighbouring GERAN BTS Cell Neighbouring TD-CDMA BTS Cell Neighbouring WCDMA BTS Cell Neighbouring CDMA 1xRTT BTS Cell LTE BTS Cell Active Mode Load Equalization Profile Automatic PUCCH Allocation Carrier Aggregation Profile Carrier Aggregation Relation CDMA2000 frequency Idle Mode parameters Discontinuous Reception (RX) GERAN frequency Idle Mode parameters GERAN Neighbour Frequency List parameters Intra frequency Idle Mode parameters Inter Frequency Group Default PRofile Inter Frequency Group PRofile Inter frequency Idle Mode parameters Handover parameters to Neigbouring GERAN BTS Cell LN Handover to HRPD Handover parameters to Neigbouring Interfrequency LTE Cell Handover parameters to Neigbouring WCDMA BTS Cell Handover parameters to Neigbouring CDMA2000 1xRTT Cell LN Neighbourship to HRPD Cell LTE Neighbor Relation LTE Neighbor Relation to GERAN LTE Neighbor Relation to UTRAN LTE Neighbor Relation to CDMA2000 1xRTT Manual PUCCH Allocation Narrow Band Internet Of Things Redirection target parameters Smart Discontinuous Reception (RX) System Information Broadcast SideLink specific MEASurement configuration Utran FDD frequency Idle Mode parameters CDMA2000 1xXRTT Parameter LN Closed Subscriber Group Home eNB Set LTE Network Multi-cell/Multicast Coordination Entity LTE Network M3 Link MBMS Single Frequency Network LTE Mobility Management Entity LN Satellite ENB Multiple Frequency Band Indicator Profile Mobility Default Profile Mobility Idle Mode Default Profile
Mobility Default profile for Redirection Mobility Profile Mobility Idle Mode Profile Mobility Profile for Redirection PM counters configuration for radio network layer Performance Monitoring QCI and ARP Profiles identifier Performance Monitoring RSRP and RSRQ Histogram Power Saving Group RAN Information Management Stream Control Transmission Protocol parameters SideLink COMMunication PROFile SideLink COMMunication RESources SideLink COMMunication TX parameters SideLink COMMunication SYNChronization Uplink coordinated multipoint set Mast Head Amplifier PMCADM Remote Electrical Tilt Radio Module Security Administration Small Form-factor Pluggable System Module External GNSS Receiver Internal GNSS Receiver Single Remote Control Unit Test RF Test Result RF Test Threshold RMOD SFP test results Troubleshooting Common Administration
Note: See the How to Read This Report tab for instructions on the usage of Parameter List Changes between issues 06A and 06B
Changes between releases Abbreviated Name FDD-LTE16 and FDDLTE16A Changed
threshold2GERANQci1
MO Class
Parameter Category
MRBTS/LNBTS/LNCEL
• Advanced parameters
Parent Structure
Child Parameters
Full Name
3GPP Name
Data Type
Threshold th2 GERAN for RSRP during QCI1
a2-Threshold
Number
Classification
Multiplicity
1
Description
Range and step
Threshold for RSRP of serving cell for start of GERAN Measurements when UE has QCI1 bearer
-140...-43 dBm, step 1 dBm
Threshold for RSRP of serving cell. For a UE with QCI1 bearer, if value is below threshold2GERANQci1 (event A2) then GERAN measurements are started. The dBm value is mapped to the 3GPP IE value according to TS 36.133: * -140 dBm means a threshold lower than -140 dBm * values between -139 dBm and -44 dBm mean a threshold lower than the configured value but higher than or equal to the (value - 1 dB) * -43 dBm means a threshold higher than or equal to -44 dBm
Formula for Getting Internal Value
Default Value
(UI_VALUE + 140) * 1 / 1
-115 dBm
Default Value Notes
Related Functions
Handover Control (Inter RAT GERAN MTT)
Modification
Required on Creation
On-line
Optional
Related Parameters
Parameter Relationships
LNCEL - threshold2aQci1: LNCEL - threshold2GERAN:
threshold2GERANQci1 is only allowed to be configured, if in the same LNCEL instance threshold2GERAN is specified. In this case, threshold2GERANQci1 must be less than or equal to threshold2aQci1.
Related Features
Interfaces
• LTE2112 Dedicated mobility thresholds for SRVCC (Standard) • LTE64 Service based handover thresholds (Standard)
• LTE BTS <-> EM • LTE BTS <-> RAC • RAC <-> RACApp
References
• 3GPP Reference: TS36.331
