August 2003
D EUTSCHE NORM
Paints, varnishes and plastics Pull-off test for adhesion (ISO 4624 : 2002) English version of DIN EN ISO 4624 ICS 87.040
{
EN ISO 4624 Supersedes DIN EN 24624, September 1992 edition.
LINDE AG - Vervielfältigung lt. DIN-Merkblatt 3
Beschichtungsstoffe – Abreißversuch zur Beurteilung derHaftfestigkeit (ISO 4624 : 2002)
European Standard EN ISO 4624 : 2003 has the status of a DIN Standard.
National foreword This standard has been published in accordance with a decision taken by CEN/TC 139 to adopt, without alteration, International Standard ISO 4624 as a European Standard. The responsible German body involved in its preparation was the Normenausschuss Beschichtungsstoffe und Beschichtungen (Coatings and Coating Materials Standards Committee), Technical Committees Lackrohstoffe and Allgemeine Prüfverfahren für Beschichtungsstoffe und Beschichtungen. The DIN Standards corresponding to the International Standards referred to in clause 2 of the EN are as follows: ISO Standard
DIN Standard
ISO ISO ISO ISO ISO
DIN DIN DIN DIN DIN
1513 1514 2808 3270 15528
EN EN EN EN EN
ISO 1513 ISO 1514 ISO 2808 23270 ISO 15228
Amendments This standard differs from DIN EN 24624, September 1992 edition, in that details of sampling and test equipment have been changed. Previous editions DIN EN 24624: 1992-09.
National Annex NA Standards referred to (and not included in Normative references and Annex ZA) DIN EN 23270 DIN DIN DIN DIN
EN EN EN EN
ISO ISO ISO ISO
1513 1514 2808 15528
Paints, varnishes and their raw materials – Temperatures and humidities for conditioning and testing (ISO 3270 : 1984) Paints and varnishes – Examination and preparation of samples (ISO 1513 : 1992) Paints and varnishes – Standard panels for testing (ISO 1514 : 1993) Paints and varnishes – Determination of film thickness (ISO 2808 : 1997) Paints, varnishes and raw materials for paints and varnishes – Sampling (ISO 15528 : 2000)
NormCD - Issue 2007-03
EN comprises 13 pages.
© No part of this standard may be reproduced without the prior permission of DIN Deutsches Institut für Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany, has the exclusive right of sale for German Standards (DIN-Normen).
Ref. No. DIN EN ISO 4624 : 2003-08 English price group 11
Sales No. 1111 xx.04
NormCD - Issue 2007-03
EN ISO 4624 May 2003
ICS 87.040
Supersedes EN 24624 : 1992.
English version
Paints, varnishes and plastics Pull-off test for adhesion (ISO 4624 : 2002) Peintures, vernis et plastiques – Essai de traction (ISO 4624 : 2002)
Beschichtungsstoffe – Abreißversuch zur Beurteilung der Haftfestigkeit (ISO 4624 : 2002)
This European Standard was approved by CEN on 2003-03-17. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. The European Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, the Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland, and the United Kingdom.
ÈÉË European Committee for Standardization Comité Européen de Normalisation Europäisches Komitee für Normung
NormCD - Issue 2007-03
Management Centre: rue de Stassart 36, B-1050 Brussels
© 2003. CEN – All rights of exploitation in any form and by any means reserved worldwide for CEN national members.
Ref. No. EN ISO 4624 : 2003 E
Page 2 EN ISO 4624 : 2003
Foreword International Standard ISO 4624 : 2002 Paints and varnishes – Pull-off test for adhesion, which was prepared by ISO/TC 35 ‘Paints and varnishes’ of the International Organization for Standardization, has been adopted by Technical Committee CEN/TC 139 ‘Paints and varnishes’, the Secretariat of which is held by DIN, as a European Standard. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, and conflicting national standards withdrawn, by November 2003 at the latest. In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, the Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland, and the United Kingdom.
Endorsement notice The text of the International Standard ISO 4624 : 2002 was approved by CEN as a European Standard without any modification. NOTE: Normative references to international publications are listed in Annex ZA (normative).
3 3 3 4 4 6 6 7 7 10 10 11
12
NormCD - Issue 2007-03
12
NormCD - Issue 2007-03
Page 3 EN ISO 4624 : 2003
NormCD - Issue 2007-03
Page 4 EN ISO 4624 : 2003
NormCD - Issue 2007-03
Page 5 EN ISO 4624 : 2003
NormCD - Issue 2007-03
Page 6 EN ISO 4624 : 2003
NormCD - Issue 2007-03
Page 7 EN ISO 4624 : 2003
NormCD - Issue 2007-03
Page 8 EN ISO 4624 : 2003
NormCD - Issue 2007-03
Page 9 EN ISO 4624 : 2003
NormCD - Issue 2007-03
Page 10 EN ISO 4624 : 2003
NormCD - Issue 2007-03
Page 11 EN ISO 4624 : 2003
NormCD - Issue 2007-03
Page 12 EN ISO 4624 : 2003
NormCD - Issue 2007-03
Page 13 EN ISO 4624 : 2003
