Standards in Pipeline Construction
Standards Standard s in Pipeline Construc Construction tion Standard Directives, Laws, Regulations Directives for pressure equipment
DGRL 97/23/EG
Pressure Equipment Regulation (14th change to the GPSG)
DruckgeräteV
Technical Basics Graphic symbols for technical drawings, pipelines General
DIN 2429-1
Functional diagram
DIN 2429-2
Manual for the procurement of equipment for power plants, pipelines and fittings
Technical delivery conditions for pipe components made from austenitic stainless steels, group 8.1 (CD ISO 15608)
Standard pipe classes PN 10 to PN 100 pipe components made from unalloyed and alloyed steels with fixed properties at high temperatures, group 1.1 and 1.2 and austenitic stainless steels, group 8.1 (CR ISO 15608) PAS 1057-101 Seamless compressive stressed Pipes DIN EN 10216-1
DIN EN ISO 6708
Made from unalloyed and alloyed steels with fixed properties at elevated temperatures
DIN EN 10216-2
Fluid technology, nominal pressures
ISO 2944
Made from alloyed fine grain steels
DIN EN 10216-3
Designation of pipelines by transported substance
DIN 2403
Made from unalloyed and alloyed steels with fixed properties at low temperatures
DIN EN 10216-4
Made from stainless steels
DIN EN 10216-5
DIN EN 45510-7-1
Boiler and pipeline armatures
DIN EN 45510-7-2
Pipeline components, definitions and selection of DN (nominal width)
General
DIN EN 13480-1
Materials
DIN EN 13480-2
Welded compressive stressed Pipes
Computation and construction
DIN EN 13480-3
Assembly and relocation
DIN EN 13480-4
Made from unalloyed steels with fixed properties at room temperature
DIN EN 10217-1
Testing and inspection
DIN EN 13480-5
Additional testing on underground Additional underground pipelines
DIN EN 13480-6
Made from electrically welded unalloyed and alloyed steels with fixed properties at elevated temperatures
DIN EN 10217-2
Instructions for use of the conformity assessment process
Made from fine-grained steels
DIN EN 10217-3
DIN EN 13480-7
Made from electrically welded unalloyed and alloyed steels with fixed properties at low temperatures
DIN EN 10217-4
UP-welded pipes made from unalloyed steels with fixed properties at elevated temperatures
DIN EN 10217-5
DIN EN 10217-6 DIN EN 10217-7
Additional requireme Additional requirements nts for pipelines of aluminum and aluminum alloys
DIN EN 13480-8
Technical Basic Standards Explanation of terms for introduction of steel DIN EN 10020 Symbols
DIN EN 10027-1
UP-welded pipes made from unalloyed steels with fixed properties at low temperatures
Numerical system
DIN EN 10027-2
Made from stainless steels
Designation system for steels
Designation system for steels, additionall symbols additiona
Sheet Material and Forgings CR 10260
Dimensions and longitudinally related mass for seamless and welded steel pipes DIN EN 10220 Iron and steel materials, types of testing certifications
DIN EN 10204
Publicly Available Specifications Classes of pipe for processed equipment
Forgings made of steel for pressure vessels (general requirements, ferritic and martensitic steels, nickel steels, fine grain steels, martenistic, austenitic compound steels)
DIN EN 10222- 1 to -5
Flat products made from pressure vessel steel
DIN EN 10028- 1 to -6
Pipes for Gas and Flammable Liquids
Basic principles for the development of pipe classes on the basis of EN 13480
PAS 1057-1
Pipe fittings – special designs
PAS 1057-5
Technical delivery conditions for pipe components made from alloyed and unalloyed steels with fixed properties at high temperatures, group 1.1 and 1.2 (CR ISO 15608) PAS 1057-10
Pipes for flammable mediums - requirement class A
DIN EN 10208-1
Pipes for flammable mediums - requirement class B
DIN EN 10208-2
Pipes for flammable mediums - requirement class C
DIN EN 10208-3
Kempchen Dichtungstechnik GmbH · Tel. Tel. +49 (0)208 8482 0 · Fax. +49 (0)208 8482 285 ·
[email protected] · www.kempchen. www.kempchen.de de
154
PAS 1057-11
Made from unalloyed steels with fixed properties at room temperature
High pressure pipelines
Metallic Industrial Pipelines
09
Standards Standard s in Pipeline Pipeline Constru Construction ction Standard
Standards in Pipeline Construction
Standards in Pipeline Construction
Standards in Pipeline Construction Standard Pipe Accessories Steel fittings with threading
DIN EN 10241
Malleable iron fittings
DIN EN 10242
Pipe fittings for welding made from unalloyed and alloyed C-Steels for interior pressure load
DIN EN 10253-2
Pipe fittings for welding made from stainless steels for interior pressure load
DIN EN 10253-4
Compensators with metallic bellows for pressure application
DIN EN 14917
Manual for the Ordering and Production of Pressure Equipment per the DGRL
Standards in Pipeline Construction Standard Methods of computation for off-load
DIN CEN/TS 1591-3
Qualification of personnel in the assembly of screw joints in the DGRL
DIN CEN/TS 1591-4
Round flanges for pipes, fittings, pipe fittings and accessory parts, identified by class Steel flanges, NPS ½ up to 24
DIN EN 1759-1
Flanges made from copper alloys
DIN EN 1759-3
Flanges made from aluminum alloys
DIN EN 1759-4
Gaskets for flanges with class designation Flat gaskets made from non-metallic materials with and without inserts
DIN EN 12560-1
General requirements
PAS 1010-1
Spiral-wound gaskets for steel flanges DIN EN 12560-2
Unlighted vessels
PAS 1010-2
Industrial pipelines
PAS 1010-3
Non-metallic soft-material gaskets with PTFE envelope
DIN EN 12560-3
Pressurizing equipment parts
PAS 1010-4
Equipment parts with a safety function
PAS 1010-5
Components
PAS 1010-6
Made from corrugated, flat or crenated profile for steel flanges
DIN EN 12560-4
RTJ gaskets made from metal for steel flanges
DIN EN 12560-5
Grooved gaskets for steel flanges
DIN EN 12560-6
Metal jacketed gaskets with layers for steel flanges
DIN EN 12560-7
Flanges and their Joints Round flanges per PN Made from steel
DIN EN 1092-1
Made from cast iron
DIN EN 1092-2
Made from copper alloys
DIN EN 1092-3
Made from aluminum alloys
DIN EN 1092-4
Gaskets for flanges with PN-Designations Flat gaskets made from non-metallic material with and without inserts
Quality assurance testing and testing of gaskets according to the standards of series EN 1514 and 12560
DIN EN 14772
09
DIN EN 1514-1
Spiral-wound gaskets for steel flanges DIN EN 1514-2 Non-metallic soft-material gaskets with PTFE envelope
DIN EN 1514-3
Made from metal with corrugated, flat or crenated profile for steel flanges
DIN EN 1514-4
Grooved gaskets for steel flanges
DIN EN 1514-6
Metal-jacketed gaskets with layers for steel flanges
DIN EN 1514-7
O-ring seals
DIN EN 1514-8
Bolts and nuts Selection of bolts and nuts
DIN EN 1515-1
Classification of bolt materials, by PN, for steel flanges
DIN EN 1515-2
Classification of bolt materials, by class
DIN EN 1515-3
Selection for use within the DGRL for steel flanges
DIN EN 1515-4
Rules for the construction of flange joints with round flanges and gaskets Methods of computation
DIN EN 1591-1
Background information
DIN EN 1591-1 Beibl. 1
Gasket characteristic values
DIN EN 1591-2
Kempchen Dichtungstechnik GmbH · Tel. +49 (0)208 8482 0 · Fax. +49 (0)208 8482 285 ·
[email protected] · www.kempchen.de
Standards in Pipeline Construction
155
