January 2005
DEUTSCHE NORM
{
DIN EN 10204 ICS 01.110 ; 77.140.01; 77.150.01
Super sedes August 1995 edition.
Metallic products – Types of inspection documents English version of DIN EN 10204 Metallische Erzeugnisse – Arten von Prüfbescheinigungen
A comma co mma i s use d as the d ecim ecimal al m arke r.
National foreword This standard has been prepared by ECISS/TC 9. The responsible German bodies involved in the preparation of this standard were the Normenausschuss Materialprüfung (Materials Materialprüfung (Materials Testing Standards Committee) and the Normenausschuss Eisen und Stahl (Steel and Iron Standards Committee). Am end men ts Amend In comparison with DIN EN 10204, August 1995 edition, the terminology and nomenclature have been amended and the number of inspection documents has been reduced. Previous editions DIN 50049: 1951-12, 1955-04, 1960-04, 1972-07, 1982-07, 1986-08, 1991-11, 1992-04; DIN EN 10204: 1995-08.
Document comprises 8 pages.
© No part of this standard may be reproduced without without the prior permission of DIN Deutsches Institut für Normung e.V. , Berlin. Beuth Verlag GmbH, GmbH , 10772 Berlin, Germany, has the exclusive right of sale for German Standards (DIN-Normen) .
English price g roup 8 www.din.de www.beuth.de
02.05
9608581
EN 10204 October 2004
ICS 01.110; 77.080.01; 77.120.01
Supersedes EN 10204 : 1991.
English version
Metallic products – Types of inspection documents Produits métalliques – Types de documents de contrôle
Metallische Erzeugnisse – Arten von Prüfbescheinigungen
This European Standard was approved by CEN on 2004-08-08. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. The European Standards exist in three official versions (English, French, German). A version in any othe r language made by translation under the responsibil ity o f a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland, and the United Kingdom.
ÈÉË European Committee for Standardization Comité Européen de Normalisation Europäisches Komitee für Normung Management Centre: rue de Stassart 36, B-1050 Brussels
© 2004. CEN – All rights of exploitation in any form and by any means reserved worldwide for CEN national members.
Ref. No. EN 10204 : 2004 E
Page 2 EN 10204 : 2004
2 3 3 3 4 4 4 5 6 7
Page 3 EN 10204 : 2004
Page 4 EN 10204 : 2004
Page 5 EN 10204 : 2004
Page 6 EN 10204 : 2004
Page 7 EN 10204 : 2004
