BEST OPTIMIZATION REPORT FOR VOLTE PAPRAMETERSFull description
Full description
Report NetackFull description
Descrição completa
WCDMA RNO Call Drop Problem Analysis
pressure drop
pemicu
Voice over IP in LTE
pemicu
Descripción: Voice over IP in LTE
VolteFull description
VOLTE-troubleshoot
VoLTE Book
VoLTE optimisationFull description
VoLTE optimisationFull description
CLOT Issue Analyzing (VoL (V oLTE TE Call Dr Drop) op)
7.Mar, 2015
Joohyun,Kim
Summary-Case Study-1/2/3
Cluster_AP-TNDR-0236-C2(VoL) •
Key VoLTE Drop — Call drop was caused by Mobile to Server test scenario(known issue) ‐
By server setting, every 15 minutes, UE could have call drop by no-RTP
‐
This is not KPI fail, but UE should have “Bye” message
‐
If there are call drop for VoLTE call attach in VoL “UE”, this is call drop(Refer to Next Slide)
— Call Drop was caused by end by user ‐
This is not KPI fail
— Call Drop was caused by 500 Server internal error ‐
•
Server Internal Error 5xx responses are failure responses given when a server itself has erred
AP-TDNR-0236-C2 Call drop summary
Case Study-1(VoLTE Call Drop) ■
Cause of Failure(Code 500 error) •
For VoLTE Attach , Call drop happened by SIP Fail cause “Code 500” — Code 500 : Server Internal Error 5xx responses are failure responses given when a server itself has erred ‐
UE didn’t receive the “183 session progress
500 Server Internal Error
Case Study-2(VoLTE Call Drop) ■ Call drop by serve call scenario •
Call drop was caused by Mobile to Server test scenario(known issue) — By server setting, every 15minute, UE could have call drop by no-RTP ‐
This case is not KPI fail , but UE, UE should send the “ Bye” message
500 Server Internal Error 15 minutes period
Case Study-3(VoLTE Call Drop) ■ Call Drop was caused by end by user •
Call drop was caused by end By user — This is not KPI fail about this case
Summary_Case Study-4(Drop-Bye)
CLUSTER TN-EROD-0037_VOL-ISSUE LOG(VoL) •
Why there are happened like “Drop -Bye” — Call drop was caused by User disconnected call by screen or ear phone button. ‐
It is not KPI Fail
‐
Below is the event situation by tester •
1st : User disconnected call by screen or ear phone button
•
2nd : User stopped Smart DM
Case Study-4(Drop-Bye)
CLUSTER TN-EROD-0037_VOL-ISSUE LOG(VoL) •
Why there are happened like “end by user” — Call drop was caused by “end by user” from user stopped smart DM. ‐
It is not KPI Fail
‐
Below is the event situation by tester •
1st : User stopped Smart DM
•
2ND : Smart DM Automatically disconnected call
End By User
Case Study-4(Drop-Bye)
CLUSTER TN-EROD-0037_VOL-ISSUE LOG(VoL) •
During the test, there was some other call from other UE — Event through, test UE is MO but MO UE received Rx-invite Msg form other UE ‐
It is strange situation
Summary_Case Study-5(BR-RNCH-0258)
After sending the 100 Trying Message, UE receive the SIP 200 OK lately •
•
During the issue time, signal is good and RLC Layer is normal In abnormal case, time between 100 trying and QCI 1 Bearer with 183 session progress is more than 20000ms — In this event time is only depend on IMS core side
Issue CLOT(BR-RNCH-0258)
In abnormal case, time between 100 trying and QCI 1 Bearer with 183 session progress is more than 20000ms
Issue CLOT(BR-RNCH-0258)
During the issue time, signal is good and RLC Layer is normal
Issue CLOT(BR-RNCH-0258)
During the issue time, There is only depend on IMS core side
Issue CLOT(BR-RNCH-0258)
During the issue time, There is only depend on IMS core side