this is a draft for a companys progress reporting procedure to be able to track project at hand
ISO: 17025-2005 Laboratory Management Standard Procedures (18 Procedures) Document Kit covers sample copy of procedures covering clause wise details for how ISO 17025 systems are implemented. The l...
Progress By St.John G.Ervine Professor Henry Corrie Mrs. MeldonFull description
Internal Audit ISO 9001:2015
This Documentation kit describes all the documents which cover requirements of ISO 22301 Documentation. ISO 22301 Certification enables organizations to implement Business Continuity Plan. By this ...
EN 15614-1 2017 ediction Welding WPQR
ProcedureFull description
Full description
EPC progress calculation
In any processor the major units are Control Unit, ALU and Memory read write. Among these units the performance of any processor majorly depends on the time taken by the ALU to perform the s…Full description
10th grade ESL testsDescrição completa
Descrição: tests
english language tests
progressFull description
calibration procedureDescrição completa
excavation procedure
This procedure applies to identification and traceability of material and constructed work under the responsibility of EMC and its Subcontractors at the stages of supply, and installation.
about homaFull description
HYDROTEST PROCEDURE OF HEAT EXCHANGER AT SITE
UAE Arbitration Civil Code Procedure with all Articles of Chapter 3
Procedure for Sub-contracting of Welding Works Form for Ordering/Checking Procedure for Sub-contracting of Heat Treatment Form for Ordering/Checking Procedure for Sub-contracting of Testing and Inspection Form for Ordering/Checking Procedure for Sub-contracting of Maintenance Form for Ordering/Checking Procedure for Sub-contracting of Calibration Form for Ordering/Checking Procedure for Acceptance Testing Form 7. WELDING PERSONNEL
CIQMS CIQMS CIQMS
PR PR PR
7.1 7.2 7.3
000 000 000
00 00 00
Procedure for Welders and Welding Operators Procedure for Welders Co-ordinators Procedure for Welders Co-ordinators 8. INSPECTION AND TESTING PERSONNEL
CIQMS
PR
8.1
000
00
Procedure for Testing and Inspection Personnel 9. EQUIPMENT
CIQMS CIQMS CIQMS
2015/07/02
PR PR PR
9.1 9.2 9.3
000 000 000
00 00 00
Procedure for Capacity and Capability of Equipment Procedure for Acceptance of Equipment Procedure for Starting to use Equipment and Recording
Procedure for Subassemblies Welding Plan Procedure for Flow Chart Flow Chart Procedure for Preparation of Welding Procedure Qualifications Welding Procedure Specifications Procedure for Qualifications of Welding Procedures Welding Procedure Qualification Record Procedure for Preparation of Work Instructions Work Instruction Procedure for Welding Related Maintenance and Support 11. WELDING CONSUMABLES
CIQMS CIQMS
PR F
11.1 11.1
000 000
00 00
Procedure for Storage and Handling of Welding Consumables Stock List 12. STORAGE OF PARENT MATERIALS
CIQMS CIQMS
PR F
12.1 12.1
000 000
00 00
Procedure for Storage of Parent Materials Stock List 13. POST WELD HEAT TREATMENT
CIQMS CIQMS CIQMS
PR F F
13.1 13.1 13.2
000 000 000
00 00 00
Procedure for Preparation of Heat Treatment Procedure Specifications Heat Treatment Procedure Specification Heat Treatment Records 14. INSPECTION AND TESTING
CIQMS CIQMS CIQMS CIQMS CIQMS CIQMS CIQMS
2015/07/02
PR F PR F PR F PR
14.1 14.1 14.2 14.2 14.3 14.3 14.4
000 000 000 000 000 000 000
00 00 00 00 00 00 00
Procedure for Activities Prior to Welding Check Form Procedure for Control During Welding Check Form Procedure for Final Inspection Check Form Procedure for Preparation of a Inspection Plan
Rev. 00
CIQMS
F
14.4
000
00
Inspection Plan
Typed
Checked
Final Print
Typed Typed Typed Typed Typed Typed
Checked Checked Checked Checked Checked Checked
Final Print Final Print Final Print Final Print Final Print Final Print
Final Print Final Print Final Print Final Print Final Print Final Print Final Print Final Print
Typed Typed Typed Typed Typed Typed
Checked Checked Checked Checked Checked Checked
Final Print Final Print Final Print Final Print Final Print Final Print
Typed Typed
Checked Checked
Final Print Final Print
15. NON CONFORMANCE AND CORRECTIVE ACTIONS CIQMS CIQMS CIQMS CIQMS CIQMS CIQMS
PR F PR F PR F
15.1 15.1 15.2 15.2 15.3 15.3
000 000 000 000 000 000
00 00 00 00 00 00
Procedure when the WPS has not been used Non Conformance Report Procedure for Non Conformances by Inspection Non Conformance Report Procedure for Non Conformances found after delivery Non Conformance Report 16. CALIBRATION AND VALIDATION OF MEASURING, INSPECTION AND TESTING EQUIPMENT
CIQMS CIQMS CIQMS CIQMS CIQMS CIQMS CIQMS CIQMS
PR F PR F PR F PR F
16.1 16.1 16.2 16.2 16.3 16.3 16.4 16.4
000 000 000 000 000 000 000 000
00 00 00 00 00 00 00 00
Procedure for Calibration and Validation of Thermometers Calibration and Validation Report Procedure for Calibration and Validation of Electrical Measuring Devices Calibration and Validation Report Procedure for Calibration and Validation of Measuring Devices Calibration and Validation Report Procedure for Calibration and Validation of Flow Meters Calibration and Validation Report 17. IDENTIFICATION AND TRACEABILITY
CIQMS CIQMS CIQMS CIQMS CIQMS CIQMS
PR F PR F PR PR
17.1 17.1 17.2 17.2 17.3 17.4
000 000 000 000 000 000
00 00 00 00 00 00
Procedure for Markings Material Card Procedure for Transfer of Markings Routing Cards Procedure for Identification of Welders Procedure for Acceptance Tests 18. QUALITY RECORDS
CIQMS CIQMS
2015/07/02
PR F
18.1 18.1
000 000
00 00
Procedure for Preparing and Filing of Quality Records Record Forms
