Alca Al cate tell OmniPC OmniPCX X En Ente terpr rpris ise e Hardware description Overview
OmniPC Omn iPCX X En Enter terpri prise se
Stand Alone
5000 legacy users / 4000 IP-Phones
90 Crystal IP-MG/IP-M IP-MG/IP-MG G
Network
50000 Users
100 Nodes
R4.2/R4.2.1, R5.0 Ux/Lx and R5.1 will be fully compatible in Network
The network link possibilities depend on the hardware configuration used
Alcatel-Lucent – Internal Proprietary Proprietary – Use pursuant to Company instruction. instruction.
OmniPC Omn iPCX X En Enter terpri prise se
Stand Alone
5000 legacy users / 4000 IP-Phones
90 Crystal IP-MG/IP-M IP-MG/IP-MG G
Network
50000 Users
100 Nodes
R4.2/R4.2.1, R5.0 Ux/Lx and R5.1 will be fully compatible in Network
The network link possibilities depend on the hardware configuration used
Alcatel-Lucent – Internal Proprietary Proprietary – Use pursuant to Company instruction. instruction.
OmniPC Omn iPCX X Ent Enterp erpris rise e Board positioning in racks Rack 1U (Small)
CS, GD or MEX CPU
position 1
position 2
Alcatel-Lucent – Internal Proprietary Proprietary – Use pursuant to Company instruction. instruction.
OmniPCX Enterprise Board positioning in racks Rack 3U (Large)
GD or MEX CPU
position 1
position 2
position 3
position 4
position 5
position 6
position 7
position 8
Alcatel-Lucent – Internal Proprietary – Use pursuant to Company instruction.
OmniPCX Enterprise Processing units Processing units and daughter boards with their location Name CS GD GA
Function Call Server Media Gateway Driver Media Gateway Applicative 16 Mbits/s link for expansion MEX rack INTIP B ACT-MG over IP link Xmem IDE controller for hard disk Multi Channel Vocoder MCV8 or MCV24 VoIP compression resources 7 or 21 compressors High Speed Link HSL1, HSL2 Expansion cabinet connection Ethernet LAN switch Slanx 3 ports +1 up-link AFU Auxiliary Function Unit
Alcatel-Lucent – Internal Proprietary – Use pursuant to Company instruction.
Location IP MG IP MG IP MG IP MG ACT-MG CS GD,GA GD, MEX CS,GA GD
OmniPCX Enterprise Processing units - "In-the-skin" IP Server (IP RS) CS
Can be plugged in slot 8 (3U rack) or in a slot 0 (dedicated rack for e-CS)
Connected to the back panel only to get the power supply
Main characteristics
Processor : ASPEN 133MHz
Memory : S-DRAM 128 MBytes + basic NAND flash 32 MBytes
Hard disk
Connectors on front panel
1 Ethernet 10/100 Base-T
1 V24 access
ON/OFF switch button Alcatel-Lucent – Internal Proprietary – Use pursuant to Company instruction.
OmniPCX Enterprise Processing units - "In-the-skin" IP Server (IP RS) CS front panel
LAN connection or directly to GD
SlanX accesses (4 ports)
Not used
V24 port (system console)
Alcatel-Lucent – Internal Proprietary – Use pursuant to Company instruction.
ON/OFF switch
OmniPCX Enterprise Processing units - "In-the-skin" IP Server (IP RS) CS daughter boards
Xmem
IDE controller for hard disk (where is located the e-CS software)
SlanX
10/100 Mbits/s base-T ethernet LAN switch
3 crossed ports and 1 straight port (uplink)
Auto-negotiation (full/half duplex)
Flow control
Alcatel-Lucent – Internal Proprietary – Use pursuant to Company instruction.
OmniPCX Enterprise Processing units - "In-the-skin" IP Server (IP RS) CS board description
Xmem daughter board + hard disk r o t c e n n o c l e n a p k c a B
0-11PCM ASL
C I R T E M
X X X DSP0
XCHANGE
DSP1
SLANX Daughter board
µP
SDRAM (128 Mbytes)
Alcatel-Lucent – Internal Proprietary – Use pursuant to Company instruction.
IP LAN
OmniPCX Enterprise Processing units - Media Gateway Driver GD
All the intelligence of the IP Media Gateway is concentrated in the GD (no firmware in other boards)
Always in slot 0
Main characteristics
1 Available position
Processor : ASPEN 133MHz
Memory : S-DRAM 64 MBytes + basic NAND flash 32 MBytes
Connectors on front panel
1 Ethernet 10/100 Base-T
1 V24 access
Switch ON/OFF button Alcatel-Lucent – Internal Proprietary – Use pursuant to Company instruction.
OmniPCX Enterprise Processing units - Media Gateway Driver GD front panel
LAN connection or directly to CS
expansion rack 1
expansion rack 2
V24 port (config., maintenance)
AFU features
ON/OFF switch for the power supply of the module
Alcatel-Lucent – Internal Proprietary – Use pursuant to Company instruction.
OmniPCX Enterprise Processing units - Media Gateway Driver GD daughter boards
MADA 1 or 3
DSPs for voice compression in Voice over IP applications.
G.711, G.723.1, G.729,
DTMF generation and detection, group 3 fax relay.
AFU
Connection of external tuner, tape recorder,...
Connection of external Loudspeaker.
HSL
Two HSL connectors allow connection of up to 2 expansion racks,
One HSL consists in 254 Time Slots. Alcatel-Lucent – Internal Proprietary – Use pursuant to Company instruction.
OmniPCX Enterprise Processing units - Media Gateway Driver GD board description
MADA1 or 3 daughter board (VoIP compressors) r o t c e n n o c l e n a p k c a B
0-11PCM ASL
C I R T E M
DSP0
XCHANGE
DSP1
2 * HSL
AFU Daughter board HSL Daughter board
µP
SDRAM (64 Mytes)
Alcatel-Lucent – Internal Proprietary – Use pursuant to Company instruction.
IP LAN
OmniPCX Enterprise Processing units - GA GA
Applicative processing unit plugged in a coupler position of the IP MG
Used to provide additional resources
VoIP compressors – Number of channels depends on the daughter board used
– MADA1 or 3
Voice guides broadcast (4 languages max), 3 x "3 parties conference" – thanks to the GA DSP0
Communication with GD only (using 2 PCM)
Other boards are not seen
Must be plugged in a coupler position with 2 PCM
Alcatel-Lucent – Internal Proprietary – Use pursuant to Company instruction.
OmniPCX Enterprise Processing units - GA GA board description
MADA1 or 3 daughter board (VoIP compressors) r o t c e n n o c l e n a p k c a B
0-11PCM ASL
C I R T E M
DSP0
XCHANGE
DSP1
SLANX Daughter board
µP
SDRAM
Alcatel-Lucent – Internal Proprietary – Use pursuant to Company instruction.
IP LAN
OmniPCX Enterprise Processing units - MEX Plugged into slot 0 of an expansion rack
Insures the control of its remote rack
Up to 2 expansion racks can be connected on a main rack
Connected to the main rack (GD) through a HSL link
16 Mbits/s link (5 meter shield cable maximum)
Using HSL daughter boards
The MEX board DSP0 receives from the DSP0 of the GD the switching information A virtual GPA is also associated to each MEX board
Alcatel-Lucent – Internal Proprietary – Use pursuant to Company instruction.
OmniPCX Enterprise Interface boards : extension interfaces Interface boards N am e U A I 4 ,8 ,1 6 SLI 4 ,8 ,1 6 DECT8
Fu n ctio n 4 ,8 o r 1 6 d ig ita l eq u ip m en ts 4 ,8 o r 1 6 a n a lo g eq u ip m en ts Interfaces for 8 Rad io Base Stations
Alcatel-Lucent – Internal Proprietary – Use pursuant to Company instruction.
Lo ca tio n IP M G IP M G A C T-M G
OmniPCX Enterprise Interface boards : extension interfaces UAI (Universal Alcatel Interface)
Digital equipment connection
4, 8 or 16 UA equipments
UAG2
UAG3
Attendants
IBS
TSC and terminal adapters
Restrictions
No UAI board in 8th slot of rack Large when MCV24 plugged on the GD (the PCM of the position 8 is reserved for the MCV24) No UAI16 in slot 5 to 8 of rack Large (because only one PCM available) Alcatel-Lucent – Internal Proprietary – Use pursuant to Company instruction.
OmniPCX Enterprise Interface boards : extension interfaces SLI (Single Line Interface)
Analogue equipments connection
Sets
Modem
Fax
4, 8 or 16 equipments
Supports Q23 and decadic dialling mode
No MF Q23 detectors (use of DSP0 detectors)
Restrictions
No SLI16 in rack Small
No SLI board in 8th slot of rack L when MCV24 plugged on GD Alcatel-Lucent – Internal Proprietary – Use pursuant to Company instruction.
OmniPCX Enterprise Interface boards : external access interfaces Digital access boards (private or public network) Name BRA 2,4,8 PRA T2 PRA T1 PCM2
Function 2,4 or 8 ISDN Basic accesses 1 x 2Mbit/s access 1 x 1,544Mbit/s access 2Mbit/s Pulse Code Modulation interface
Alcatel-Lucent – Internal Proprietary – Use pursuant to Company instruction.
Location IP MG IP MG IP MG ACT-MG
OmniPCX Enterprise Interface boards : external access interfaces Digital interfaces
BRA (Basic Rate Interface)
T0 interfaces (2B+D) – S0 FV leased line – public ISDN access
2, 4 or 8 accesses
S0 mode not available
PRA T1 (Primary Rate Access T1)
1 x 1,544 Mbits T1 interface – public ISDN access – ABC-F Network links
Available in CCS mode (23B+D) or CAS mode (24B)
PRA T2
1 x 2 Mbits E1 (T2) access – public ISDN access, ABC-F Network links Alcatel-Lucent – Internal Proprietary – Use pursuant to Company instruction.
OmniPCX Enterprise Interface boards : mixed interfaces Mixed boards (extension and external accesses interfaces)
Offers BRA, UA and Z functions Nam e
N u m b e r o f T0
Num ber of UA
Num ber of Z
Lo c a tio n
M IX 48 4
4
8
4
IP M G
M IX 44 8
4
4
8
IP M G
M IX 24 4
2
4
4
IP M G
M IX 04 8
0
4
8
IP M G
M IX 08 4
0
8
4
IP M G
M IX 04 4
0
4
4
IP M G
2 PCMs are required for a MIX board
No MIX boards in slot 5 to 8 of rack Large (because only one PCM available)
Alcatel-Lucent – Internal Proprietary – Use pursuant to Company instruction.
OmniPCX Enterprise Interface boards : external access interfaces
Analogue access boards (public operator, inter PABX) Name APA 4,8 EMTL ACEM
Function 4 or 8 analog interfaces 6 analog trunks for private tie line 4 analog trunks for private tie line
APA
4 or 8 analogue equipment for public/PSTN trunk
Alcatel-Lucent – Internal Proprietary – Use pursuant to Company instruction.
Location IP MG ACT-MG ACT-MG
IP Rack Server Auxiliary boards Auxiliary boards
LANX8, LANX16
Switch 10/100 Base T (autodetection)
8 or 16 ports ( 1 is crossed ( Uplink ))
RMA
Secured remote access for maintenance
MODB
Board supporting 1 external modem To manage the power supply of the rack dedicated to RMA Alcatel-Lucent – Internal Proprietary – Use pursuant to Company instruction.
OmniPCX Enterprise Restrictions / limits Maximum number of PRA T1/T2
1 in rack S and 3 in rack L
If MCV24 is used in rack L
Slot 8 is useless (except for CS)
ISDN accesses
12 accesses (T2, T1 and/or T0) maximum per IP MG
No S0 on BRA or MIX interfaces
Synchronization not transmitted from expansion rack to main rack
Only accesses of the main rack can synchronize the whole IP MG Alcatel-Lucent – Internal Proprietary – Use pursuant to Company instruction.
OmniPCX Enterprise Boards unplug Warning :
To unplug a CPU CS you have first to switch it off
The couplers boards are hot pluggable
Alcatel-Lucent – Internal Proprietary – Use pursuant to Company instruction.
Crystal hardware CPU6 Step2
Integration of the CPU id
Memory capacity increase (from 64 to128 Mo)
NPRAE (New Primary Rate Access on E1 interface)
2 E1 accesses E1
Various signaling protocols available:
T2, ABC-F, QSIG, QSIG_GF & ISDN
Alcatel-Lucent – Internal Proprietary – Use pursuant to Company instruction.
Crystal hardware GPA2-2 (General Purpose Auxiliary)
MFR1/MFR2 Frequencies sending
MLVP function (Multi Language Voice Prompt)
Conference function (up to 30 participants)
Usual frequencies detection
VAD detection (Voice Activity Detection)
(2)
At least one detection function whatever the board configuration is (in opposite to the GPA board)
Alcatel-Lucent – Internal Proprietary – Use pursuant to Company instruction.
Crystal hardware INTIP2 (INTerconnecting on IP network)
Main processor update
V24 port connection modification
Use of the same cable than the one used for CS, GD & GA boards
Addition of the V36 interface
WAN access – 10 Mb/s max on X24/V11 – 1920 Kb/s max on V36
Alcatel-Lucent – Internal Proprietary – Use pursuant to Company instruction.
Crystal hardware eUA32 & eZ32 (Legerity)
Cost reduction for the customer
Specific dedicated licenses are mandatory for UA and Z extensions (check of the UA & Z extensions management)
Impossibility to declare an UA32/Z32 board while using an eUA32/eZ32 board
Alcatel-Lucent – Internal Proprietary – Use pursuant to Company instruction.
Crystal Platform
Crystal hardware - CPU7 CPU7
Replaces the CPU5
Processing unit
INTEL PENTIUM III LP processor 700MHz
System memory
SDRAM technology – 256 Mb
The embedded Ethernet link can be disabled by software, even if the corresponding on board jumper is present Force the Ethernet output bandwidth to 10 or 100 Mb, Half or Full duplex mode (“auto-sense” is the default mode) Alcatel-Lucent – Internal Proprietary – Use pursuant to Company instruction.
Crystal hardware - CPU7 CPU7 functionalities
IO1
CPU signaling
Clock and frame synchronization signals
Tones generation
Q23 signaling detection – Q23 – Q23x
DECT Timing Module (DTM) function – Synchronization of the IBS and RBS
“External Music” function Alcatel-Lucent – Internal Proprietary – Use pursuant to Company instruction.
Crystal hardware - CPU7 CPU7 restrictions
This Board does not support any daughter boards
No VMU
No OBCA (use of IO2N (1) if required)
Only one DSP (used for the DTM function) instead two for the CPU6
With CPU6, the second DSP was used for the VPU function (voice Processing Unit)
Alcatel-Lucent – Internal Proprietary – Use pursuant to Company instruction.
Crystal hardware GIP4-1/GIP4-4 compression daughter board Compression daughter board which replaces GIP6 daughter boards on INTIP/INTIP2 boards
Whatever the algorithm (G711, G723 or G729) and depth of echo cancellation are used, a DSP provides 8 compressors
64ms echo cancellation(1) compatibility
Two type of GIP4
GIP4-4 has 4 DSP and can provide up to 32 compressors
GIP4-1 has 1 DSP and can provide up to 8 compressors
Alcatel-Lucent – Internal Proprietary – Use pursuant to Company instruction.
Crystal hardware GIP4-1/GIP4-4 compression daughter board When two compression daughter boards on an INTIP2, both must be the same type
2 GIP4-4 or 2 GIP4-1
In case of two GIP4-4, there is only a maximum of 60 (2*30) compressors available on the INTIP/INTIP2 board (because of internal board PCMs) Configuration of the compression daughter board is done at the (“INTIP”) board level (mgr/Shelf / Board “ Review/Modify”)
Alcatel-Lucent – Internal Proprietary – Use pursuant to Company instruction.
Common Platform
Common hardware MADA-1/MADA-3 compression daughter board Compression daughter board which replaces MCV8 and MCV24 daughter boards on GD/GA boards Two types of MADA (configurable at the board level)
(1)
MADA3 has 3 DSP and can provide (2) up to 24 compressors
MADA1 has one DSP and can provide up to 8 compressors
Whatever the algorithm (G711, G723 or G729) and depth of echo cancellation are used, a DSP provides 8 compressors There is only one MADAx daughter board on a GD/GA 64ms echo cancellation(3) compatibility
Alcatel-Lucent – Internal Proprietary – Use pursuant to Company instruction.
