WARRANTY Within 30 days of purchase: Return to retailer from wh ich you purchase d for r epair o r repla cement.
M1X STRIKER
Customer Service
[email protected]
Within 5 years of purchase: Return to Olight for repair or replacement. This warranty does not cover normal wear and tear, modifications, misuse, disintegrations, negligence, accidents, improper maintenance, or repair by anyone
VARIABLE-OUTPUT DUAL-SWITCH LED FLASHLIGHT
USER MANUAL
www.olightworld.com to Visit www.olightworld.com to see our complete product line of portable illumination tools.
other than an Authorized retailer or Olight itself. Thank you for purchasing the Olight M1X Striker flashli ght! Plea se read this man ual car efully b efore using this product.
MADE IN CHINA
APR 15, 2015
Battery magazine is designed for CR123A battery. If with 18650 batteries, battery magazine is unnecessary.
SUPPORTED BATTERIES • 1 x 18650 18650 • 2 x CR123A CR123A • 2 x RCR123A RCR123A
INSIDE THE BOX M1X Striker, lanyard, battery magazine, (2) o-rings, user manual,
(FIG A)
ON/OFF: Click the tailcap switch.
ON
1 x CLICK
MOMENTARY ON: Half press the tailcap switch. A half press is a light push of the tailcap switch without clicking. CHANGE BRIGHTNESS LEVEL: When the flashlight is on, single click the side switch next to the flashlight head to select low-medium-high or burst mode. Double half press the tail switch to reach the highest brightness level when the light is off.
MEMORIZED BRIGHTNESS LEVEL
ON
1 x HALF PRESS
MOMENTARY ON
OFF
2 x HALF PRESSES HIGH
3 x HALF PRESSES
STROBE: 1. Quickly half press the tailcap switch three times when the light is off. (cannot be memorized) 2. Press the side switch and hold for 1 second when the light is on. MOONLIGHT: Hold the side switch first and then press the tail switch.
TWIST TO REMOVE
BATTERY INSTALLATION Unscrew the tail cap counter-clockwise and r emove the battery magazine. Place the batteries in the magazine and put it in the light. Make sure that the positive contact is facing the head of flashli ght. Tigh ten the tail cap clockwise as far as it can go .
SPECIFICATIONS
HOW TO OPERATE (FIG A)
Technical Support Inquiries
[email protected]
1 x CLICK
STROBE
MOONLIGHT
TURBO
1000lumens/5min+550lumens/ 55min
HIGH
350 lumens / 2 hours
MID
60 lumens / 12 hours
LOW
10 lumens / 60 hours
MOONLIGHT
0.5 lumens / 360 hours
STROBE
10 Hz / 1000 lumens
LED
Cree XM-L2 CW
VOLTAGE
2.8v TO 8.4v
CANDELLA
9,000 cd
BEAM DISTANCE
190 meters / 623 feet
BATTERY TYPE
1 x 18650 or 2 x CR123A/RCR123A
BODY TYPE
type III hard anodized aluminum
WATERPROOF
IPX8 (up to 2 meters)
IMPACT RESISTANCE
1.5 meters
DIMENSIONS
L 136mm x D 26mm/5.35 in x 1.02 in
WEIGHT
80 g/ 2.82 oz (excluding batteries)
1 x CLICK
Note: testing done with 2 x CR123A batteries (3.0V 1500mAh)
PRODUCT PARTS WARNING:
All performance claims to ANSI/NEMA FL1-2009 Standard. STRIKE BEZEL HOLD ON 1 SECOND
OUTPUT & RUNTIME
• Do not mix rechargeable and non-rechargeable batteries.
N E A Z I N GA A G MA Y M E R Y A T T BA B
2 3 A C R 1
+
2 3 A C R1
O R
0 1 8 6 5 +
-
-
Output ( lumen )
• Do not mix batteries of different types/brands.
S ID E S WI TC H
T AI L SW IT CH
Ambient: Temp. 25 Humd. 65%RH, no air flow, room Battery: 2 x CR123A(3V 1500mAh)
1000 900
• Do not use unsupported batteries with this flashlight.
Turbo
800 700 600
• Use caution on high outputs or long runtimes as flashli ght may g et hot.
TAIL SWITCH
SIDE SWITCH
500 400 300 200 100
POCKET CLIP
0
TAILCAP LANYARD HOLE
0
5
8 10
20
30
40
500
60
70
80
Run Time ( minute )
