Installing and Optimizing
Why Dolby? Fix tiny sound, weak volume, buzzing and rattling
Lets you play your audio much louder over the built-in
speakers, with less distortion Provides you with total control over your PC’s audio
settings
What do you need? Laptops with either Conexant or Realtek sound card
Dolby Installation Files:
x86 (part 1, 2 and 3) for systems with 32bit OS x64 (part 1, 2 and 3) for systems with 64bit OS ThinkMix v2.inx files (works best with ThinkPad any#20
series) # represents the screen size
Where can you get it? https://skydrive.live.com/?sc=documents&cid=5cc331e7bbc4cd 97#!/?cid=5cc331e7bbc4cd97&sc=documents&uc=8&id=5CC331 E7BBC4CD97%21207
Make sure you download part 1, 2 and 3 of either x86 or
x64 to the same folder before extracting
How to install? Uninstall existing Conexant or Realtek drivers
Go to x86 or x64 folder, open DTPC.msi
How to install? Click Next
How to install? Check - Install content assets
- Install driver:
DHT (Release)
How to install? Click Install
How to install? Please Wait It should take less
than a minute to complete
How to install? Click Install this driver
software anyway
How to install? Installation Complete Click Finish
Optimize your sound Open Dolby Tuning
and Profile Creator Under All Tuning
+ Profiles, click Import
Optimize your sound Go to the folder
where you store ThinkMix2.inx Click on ThinkMix2.inx
and click Open
Optimize your sound For Windows Vista and 7 Go to Control Panel View by Category:
Hardware and Sound click Sound or Manage audio devices View by Small / Large Icons: Sound Right-click, check Show Disabled and Disconnected Device
Optimize your sound Under Playback tab,
double-click Speakers Go to Advanced tab Under Default Format section, change the sample rate and bit depth to 24 bit, 192000 Hz (Studio Quality) and click OK Repeat steps for headphones
Optimize your microphone Under Recording tab,
double-click Microphone Go to Advanced tab Under Default Format section, change the sample rate and bit depth to 2 channel, 24 bit, 96000 Hz (Studio Quality) and click OK Repeat steps for other Microphone
Optimize your microphone Set the microphone level
to 70 and the boost to 12%
Sound Tuning Guideline 1. Default (ThinkMix v2 Settings, in case you want to
revert manually) Regulator Band Coupling: 0.5 Profiles: Balance2 / Loudness2 Intelligent Equalizer: Disabled (Balance2) / Enabled, Focused (Loudness2) Dialogue Enhancer: Disabled Surround Virtualizer: Disabled
Sound Tuning Guideline 2. MAX BASS! (Lower Volume, a bit muddy)
Regulator Band Coupling: 1.0 Profiles: Balance2 Intelligent Equalizer: Enabled, Warm Dialogue Enhancer (Enable to Compensate Clarity *Optional*, Disable for Optimum Bass) Surround Virtualizer Disabled
Sound Tuning Guideline 3. MAX VOLUME! (Sharp, Crisp, Deafening sound, lack of
bass) Regulator Band Coupling: 0.0 Profiles: Loudness2 Intelligent Equalizer: Enabled, Focused Dialogue Enhancer (Disable for better Vocal, Enable for better Clarity) Surround Virtualizer Disabled
Thank You By PeterTWJ If you need any help or have any feedbacks / suggestions
on improving it, feel free to post it at http://forums.lenovo.com/t5/General-Discussion/DolbyHome-Theater-v4-for-most-Lenovo-Laptops/td-p/620229
