MF4890dw/MF4880dw/MF4870 MF4890dw/MF 4880dw/MF4870dn/MF4830d/MF dn/MF4830d/MF4820d/MF4780w 4820d/MF4780w/MF4770n/ /MF4770n/ MF4750/MF4730/MF4720w/MF MF4750/MF47 30/MF4720w/MF4712/MF4710/D 4712/MF4710/D530/D560/L418S 530/D560/L418S/L410/L190Series /L410/L190Series
Service Manual Rev Rev.3 .3 Product Overview Technical Overview Periodical Services
Disassembly/Assembly Adjustment
Trouble Shooting Error Codes Service Mode Appendix
Application This manual has been issued by Canon Inc. for qualied persons to learn technical theory,
The following paragraph does not apply to any countries where such provisions are
installation, maintenance, and repair of products. This manual covers all localities where the
inconsistent with local law.
products are sold. For this reason, there may be information in this manual that does not apply to your locality.
Trademarks The product names and company names used in this manual are the registered trademarks
Corrections
of the individual companies.
This manual may contain technical inaccuracies or typographical errors due to improvements or changes in products. When changes occur in applicable products or in the contents of this
Copyright
manual, Canon will release technical information as the need arises. In the event of major
This manual is copyrighted with all rights reserved. Under the copyright laws, this manual may
changes in the contents of this manual over a long or short period, Canon will issue a new
not be copied, reproduced or translated into another language, in whole or in part, without the
edition of this manual.
consent of Canon Inc. © CANON INC. 2012
Caution Use of this manual should be strictly supervised to avoid disclosure of condential information.
The following rules apply throughout this Service Manual:
Explanation of Symbols The following symbols are used throughout this Service Manual.
1. Each chapter contains sections explaining the purpose of specic functions and the Symbols
Explanation
Symbols
Explanation
relationship between electrical and mechanical systems with reference to the timing of operation. In the diagrams,
Check.
Remove the claw.
represents the path of mechanical drive; where a signal name
accompanies the symbol, the arrow
indicates the direction of the electric signal.
The expression "turn on the power" means ipping ipping on the power switch, closing the front door, and closing the delivery unit door, which results in supplying the machine with power. Check visually.
Insert the claw.
2. In the digital circuits, '1' is used to indicate that the voltage level of a given signal is "High", while '0' is used to indicate "Low". (The voltage value, however, differs from circuit to circuit.) In addition, the asterisk (*) as in "DRMD*" indicates that the DRMD signal goes on Check the noise.
Use the bundled part.
when '0'. In practically all cases, the internal mechanisms of a microprocessor cannot be checked in the eld. Therefore, the operations of the microprocessors used in the machines are not
Disconnect the connector.
Push the part.
Connect the connector.
Plug the power cable.
discussed: they are explained in terms of from sensors to the input of the DC controller PCB and from the output of the DC controller PCB to the loads. The descriptions in this Service Manual are subject to change without notice for product improvement or other purposes, and major changes will be communicated in the form of Service Information bulletins. All service persons are expected to have a good understanding of the contents of this Service
Remove the cable/wire from the cable guide or wire saddle.
Set the cable/wire to the cable guide or wire saddle.
Remove the screw.
Tighten the screw.
Manual and all relevant Service Information bulletins and be able to identify and isolate faults Turn on the power.
in the machine.
Contents
SADF -----------------------------------------------------------------------------------------1-13 READER ------------------------------------------------------------------------------------- 1-14 Printer----------------------------------------------------------------------------------------- 1-14 Printer----------------------------------------------------------------------------------------- 1-15
Control Panel ---------------------------------------------------------------------------------------------------------1-15 ----------------------------------1-15
Safety Precautions CDRH Provisions ----------------------------------------------------------------------------------------------------------0-2 -------------0-2 Laser Safety -------------------------------------------------------------------------------------------------------------------------------0-2 -----0-2 About Laser Beams ---------------------------------------------------------------------------------------------------------------------------- 0-2 Handling Laser Scanner Unit ---------------------------------------------------------------------------------------------------- 0-2
Toner Safety -------------------------------------------------------------------------------------------------------------------------------0-3 -----0-3 About Toner Toner ------------------------------------------------------------------------------------------------------------------------------------------------- 0-3 Handling Adhered Toner Toner ----------------------------------------------------------------------------------------------------------------- 0-3
Notes on Handling Lithium Battery -------------------------------------------------------------------0-3 ----------0-3 Notes on Assembly/Disas Assembly/Disassembly sembly ----------------------------------------------------------------------0-3 ----------0-3
1 Product Overview Product Lineups -----------------------------------------------------------------------------------------------------------1-2 ----------------1-2 Main Unit -------------------------------------------------------------------------------------------------------------------------------------------------------- 1-2 Options ------------------------------------------------------------------------------------------------------------------------------------------------------------ 1-3
Features ------------------------------------------------------------------------------------------------------------------------------------1-4 ----------1-4 Features ---------------------------------------------------------------------------------------------------------------------------------------------------------- 1-4
Product Specications---------------------------------------------------------------------------------------------------1-4 ----------1-4 Main Unit Specications------------------------------------Specications------------------------------------------------------------------------------ 1-4 Wireless LAN Specications ------------------------------------------------------------------------------------------------------ 1-6 FAX Specications-------------------------------------Specications------------------------------------------------------------------------------------------- 1-6
Name of Parts-----------------------------------------------------------------------------------------------------------------------1-7 ----------1-7 External View -------------------------------------------------------------------------------------------------------------------------------------------- 1-7 MF4890dw/MF4880dn -------------------------------------------------------------------- 1-7 MF4870dn/MF4830d/MF4780w/MF4770n/ MF4870dn/MF4830d/ MF4780w/MF4770n/MF4750/MF4730 MF4750/MF4730 ------------------- 1-8 MF4820d/MF4720w/MF4712/MF4710 MF4820d/MF4720w/M F4712/MF4710 ------------------------------------------------ 1-9 D530 ------------------------------------------------------------------------------------------1-10
MF4890dw/MF4880dw/MF4830d/MF4820d MF4890dw/MF4880dw /MF4830d/MF4820d---------------------------------------- 1-15 MF4780w/MF4770n/MF4750/MF4730/M MF4780w/MF4770n/ MF4750/MF4730/MF4720/MF4712/M F4720/MF4712/MF4710 F4710 -----------1-17 D530/D560 ----------------------------------------------------------------------------------1-18 L418S/L410/L190-------------------------------------------------------------------------- 1-19
2 Tec Technical hnical Overview Over view Basic Conguration--------------------------------------------------------------------------------------------------------------2-2 ------2-2 Conguration function ---------------------------------------------------------------------------------------------------------------------- 2-2 Basic Sequence -------------------------------------------------------------------------------------------------------------------------------------- 2-2 Basic Sequence of Operation Operation ----------------------------------------------------------- 2-2 Print Sequence Sequence ------------------------------------------------------------------------------ 2-3
Controller System---------------------------------------------------------------------------------------------------------2-4 ----------------2-4 Main Controller ---------------------------------------------------------------------------------------------------------------------------------------- 2-4 General description ------------------------------------------------------------------------ 2-4
Engine Controller ---------------------------------------------------------------------------------------------------------------------------------- 2-4 General description ------------------------------------------------------------------------ 2-4
Service Works ------------------------------------------------------------------------------------------------------------------------------------------ 2-5 At parts replacement----------------------------------------------------------------------- 2-5 Maintenance --------------------------------------------------------------------------------- 2-5 Notes on service works ------------------------------------------------------------------- 2-5
Document Exposure/Feeder System ------------------------------------2-6 ------------------------------------2-6 Document Exposure System-----------------------------------System------------------------------------------------------------------- 2-6 Overview -------------------------------------------------------------------------------------- 2-6 Major Components Components ------------------------------------------------------------------------- 2-6
Document Feeder System ------------------------------------------------------------------------------------------------------------ 2-7 Overview -------------------------------------------------------------------------------------- 2-7 Various Control ------------------------------------------------------------------------------ 2-8
Service Works -------------------------------------------------------------------------------------------------------2-10 ----------------------------------2-10
D560 ------------------------------------------------------------------------------------------1-11
At parts replacement---------------------------------------------------------------------- 2-10
L418S/L410/L190-------------------------------------------------------------------------- 1-12
Maintenance --------------------------------------------------------------------------------2-10
Cross Section ------------------------------------------------------------------------------------------------------------------------------------------1-13 -1-13 DADF -----------------------------------------------------------------------------------------1-13
Notes on service works ------------------------------------------------------------------2-10
Laser Exposure System --------------------------------------------------------------------------------------------------- 2-11
Overview ------------------------------------------------------------------------------------------------------------------------------------------------------ 2-11 Overview ------------------------------------------------------------------------------------- 2-11
Controlling the Laser Activation Timing Timing--------------------------------------2-12 --------------------------------------2-12 Laser ON/OFF Control -------------------------------------------------------------------2-12 Horizontal Sync Control ------------------------------------------------------------------2-12
Overview/Conguration ---------------------------------------------------------2-22 Overview ------------------------------------------------------------------------------------- 2-22 Main Parts of Fixing assembly ---------------------------------------------------------2-22
Various Control Mechanisms --------------------------------------------------2-23 Fixing Temperature Temperature Control ------------------------------------------------------------- 2-23
Laser Control -------------------------------------------------------------------------------------------------------------------------2-13 --------------------2-13
Protective Functions ----------------------------------------------------------------------2-23
Auto Power Control (APC) --------------------------------------------------------------2-13
Other Functions ---------------------------------------------------------------------------------------------------2-24 ----------------------------------2-24
Laser Scanner Motor Control --------------------------------------------------2-13 --------------------------------------------------2-13 Overview ------------------------------------------------------------------------------------- 2-13
Throughput Down Control --------------------------------------------------------------- 2-24
Service Works -------------------------------------------------------------------------------------------------------2-25 ----------------------------------2-25
Scanner Motor Fault Detection---------------------------------------------------------2-14
At parts replacement---------------------------------------------------------------------- 2-25
Service Works ---------------------------------------------------------------------------------------------------------2-14 --------------------------------2-14
Maintenance --------------------------------------------------------------------------------2-25 Notes on service works ------------------------------------------------------------------2-25
At parts replacement---------------------------------------------------------------------- 2-14 Maintenance --------------------------------------------------------------------------------2-14
Pickup And Feeding System ---------------------------------------------------------------------------------------- 2-26
Notes on service works ------------------------------------------------------------------2-14
Overview ---------------------------------------------------------------------------------------------------------------------------------------------------2-26 ---2-26
Image Formation System -----------------------------------------------------------------------------------2-15 --------------2-15 Overview/Conguration ---------------------------------------------------------2-15 Overview ------------------------------------------------------------------------------------- 2-15 Print Process--------------------------------------------------------------------------------2-15 Process--------------------------------------------------------------------------------2-15 Static Latent Image Formation Block -------------------------------------------------2-16 Development Block------------------------------------------------------------------------2-17 Transfer Block ------------------------------------------------------------------------------2-17 Fixing Block ---------------------------------------------------------------------------------2-18
Overview ------------------------------------------------------------------------------------- 2-26
Detecting Jams --------------------------------------------------------------------2-27 --------------------------------------------------------------------2-27 Jam Detection Outline -------------------------------------------------------------------- 2-27 Delay Jams ---------------------------------------------------------------------------------- 2-28
Reversal Delay Jam ------------------------------------------------------------------------------------------------------2-29 ---------------------2-29 Stationary Jams ---------------------------------------------------------------------------- 2-30 Other Jams ---------------------------------------------------------------------------------- 2-31
Service Works -------------------------------------------------------------------------------------------------------2-32 ----------------------------------2-32
Drum Cleaning Block ---------------------------------------------------------------------2-18
At parts replacement---------------------------------------------------------------------- 2-32
High-Voltage Control -------------------------------------------------------------2-19 -------------------------------------------------------------2-19
Maintenance --------------------------------------------------------------------------------2-32 Notes on service works ------------------------------------------------------------------2-32
Overview ------------------------------------------------------------------------------------- 2-19 Generating Primary Charging Bias ----------------------------------------------------2-19 Generating Developing Bias ------------------------------------------------------------2-19 Generating Transfer Bias ---------------------------------------------------------------- 2-19
Toner Cartridge --------------------------------------------------------------------2-20 --------------------------------------------------------------------2-20 Toner Level Detection -------------------------------------------------------------------- 2-20 Toner Specication of Toner level display----------------------------------------------------2-20 display----------------------------------------------------2-20 Operation when toner level is Low/Nearly Out -------------------------------------2-20 Toner To ner Cartridge Absence/Presence Detection ------------------------------------- 2-21
External And Controls System -----------------------------------------------------------------------2-33 --------------2-33 Power Supply ----------------------------------------------------------------------2-33 ----------------------------------------------------------------------2-33 Power Supply ------------------------------------------------------------------------------- 2-33 Protective Functions ----------------------------------------------------------------------2-33
Service Works -------------------------------------------------------------------------------------------------------2-34 ----------------------------------2-34 At parts replacement---------------------------------------------------------------------- 2-34 Maintenance --------------------------------------------------------------------------------2-34 Notes on service works ------------------------------------------------------------------2-34
Service Works ---------------------------------------------------------------------------------------------------------2-21 --------------------------------2-21 At parts replacement---------------------------------------------------------------------- 2-21 Maintenance --------------------------------------------------------------------------------2-21 Notes on service works ------------------------------------------------------------------2-21
Fixing System----------------------------------------------------------------------------------------------------------------------------- 2-22
3 Periodical Services Periodically Replaced Parts ---------------------------------------------------------------------------------3-2 --------------3-2 Periodically Replaced Parts -------------------------------------------------------------------------------------------------------- 3-2
Consumables ------------------------------------------------------------------------------------------------------------------------------3-2 --3-2 Consumables -------------------------------------------------------------------------------------------------------------------------------------------- 3-2
Periodical Service----------------------------------------------------------------------------------------------------------------------3-3 --3-3 Scheduled Servicing -------------------------------------------------------------------------------------------------------------------------- 3-3
Cleaning ------------------------------------------------------------------------------------------------------------------------------------3-3 ----------3-3 Printer ---------------------------------------------------------------------------------------------------------------------------------------------------------------- 3-3 Reader ADF ------------------------------------------------------------------------------------------------------------------------------------------------ 3-4 SADF ------------------------------------------------------------------------------------------ 3-4 DADF ------------------------------------------------------------------------------------------ 3-4
Removing the Front Cover Unit(MF4890dw/4880dw) -------------------4-18 Preparation ---------------------------------------------------------------------------------- 4-18 Procedure------------------------------------------------------------------------------------4-18 Procedure ------------------------------------------------------------------------------------4-18
Removing the Upper Cover(MF4890dw/4880dw) ------------------------4-18 Preparation ---------------------------------------------------------------------------------- 4-18 Procedure------------------------------------------------------------------------------------4-18 Procedure ------------------------------------------------------------------------------------4-18
Removing the Left Cover(MF4870dn/MF4830d)--------------------------4-20 Procedure------------------------------------------------------------------------------------4-20 Procedure ------------------------------------------------------------------------------------4-20
Removing the Right Cover(MF4870dn/MF4830d)------------------------4-21 Procedure------------------------------------------------------------------------------------4-21 Procedure ------------------------------------------------------------------------------------4-21
4 Disassembly/Assembly Outline -------------------------------------------------------------------------------------------------------------------------------------4-2 -------------4-2 List of Parts ------------------------------------------------------------------------------------------------------------------------------------4-3 ---4-3 Main Unit -------------------------------------------------------------------------------------------------------------------------------------------------------- 4-3 List of DADF Unit --------------------------------------------------------------------------- 4-3 List of SADF Unit --------------------------------------------------------------------------- 4-3 List of Reader Unit ------------------------------------------------------------------------- 4-4
Duplex Printer Unit ------------------------------------------------------------------------------------------------------------------------------ 4-4 List of Motor/Fan Motor/Fan ---------------------------------------------------------------------------- 4-4 List of Solenoid Solenoid ------------------------------------------------------------------------------ 4-5 List of Sensor -------------------------------------------------------------------------------- 4-5 List of Switch and and Speaker --------------------------------------------------------------- 4-6 List of Heater/Thermoswitch/Thermistor Heater/Thermoswitch/Thermistor ---------------------------------------------- 4-6 List of PCB ----------------------------------------------------------------------------------- 4-7
Single-sided Printer Unit ---------------------------------------------------------------------------------------------------------------- 4-7 List of Motor/Fan Motor/Fan ---------------------------------------------------------------------------- 4-7 List of Solenoid Solenoid ------------------------------------------------------------------------------ 4-8
List of Connectors------------------------------------------------------------------------------------------------------------------ 4-11 DADF Unit ------------------------------------------------------------------------------------------------------------------------------------------------- 4-11 SADF Unit -------------------------------------------------------------------------------------------------------------------------------------------------- 4-11 Reader Unit -----------------------------------------------------------------------------------------------------------------------------4-12 --------------------4-12 Duplex Printer Unit ---------------------------------------------------------------------------------------------------4-12 --------------------------4-12 Single-sided Printer Unit --------------------------------------------------------4-14
External Cover, Interior ------------------------------------------------------------------------------------------------------ 4-16 Removing the Left Cover(MF4890dw/4880dw) ---------------------------4-16 ---------------------------4-16 Removing the Right Cover(MF4890dw/4880dw) -----------------------------------------------------------------------------------------4-17
Removing the Front Cover Unit(MF4870dn/MF4830d) -----------------4-22 Preparation ---------------------------------------------------------------------------------- 4-22 Procedure------------------------------------------------------------------------------------4-22 Procedure ------------------------------------------------------------------------------------4-22
Removing the Upper Cover (MF4870dn/MF4830d)------(MF4870dn/MF4830d)----------------------4-22 ---------------4-22 Preparation ---------------------------------------------------------------------------------- 4-22 Procedure------------------------------------------------------------------------------------4-22 Procedure ------------------------------------------------------------------------------------4-22
Removing the Left Cover(MF4820d) -----------------------------------------4-24 -----------------------------------------4-24 Procedure------------------------------------------------------------------------------------4-24 Procedure ------------------------------------------------------------------------------------4-24
Removing the Right Cover(MF4820d) ---------------------------------------4-25 ---------------------------------------4-25 Procedure------------------------------------------------------------------------------------4-25 Procedure ------------------------------------------------------------------------------------4-25
Removing the Front Cover Unit(MF4820d)---------------------------------4-26 Unit(MF4820d)---------------------------------4-26 Preparation ---------------------------------------------------------------------------------- 4-26 Procedure------------------------------------------------------------------------------------4-26 Procedure ------------------------------------------------------------------------------------4-26
Removing the Upper Cover (MF4820d)----------------------------------------------------------------------4-26 ---4-26 Preparation ---------------------------------------------------------------------------------- 4-26 Procedure------------------------------------------------------------------------------------4-26 Procedure ------------------------------------------------------------------------------------4-26
Removing the Left Cover(D530) ----------------------------------------------4-28 Procedure------------------------------------------------------------------------------------4-28 Procedure ------------------------------------------------------------------------------------4-28
Removing the Right Cover(D530) --------------------------------------------4-29 Procedure------------------------------------------------------------------------------------4-29 Procedure ------------------------------------------------------------------------------------4-29
Removing the Front Cover Unit(D530) --------------------------------------4-30 --------------------------------------4-30 Preparation ---------------------------------------------------------------------------------- 4-30 Procedure------------------------------------------------------------------------------------4-30 Procedure ------------------------------------------------------------------------------------4-30
Removing the Upper Cover (D530) ------------------------------------------4-30 ------------------------------------------4-30 Preparation ---------------------------------------------------------------------------------- 4-30 Procedure------------------------------------------------------------------------------------4-30 Procedure ------------------------------------------------------------------------------------4-30
Removing the Left Cover(D560) ----------------------------------------------4-32
Procedure------------------------------------------------------------------------------------4-32 Procedure ------------------------------------------------------------------------------------4-32
Removing the Right Cover(D560) --------------------------------------------4-33 Procedure------------------------------------------------------------------------------------4-33 Procedure ------------------------------------------------------------------------------------4-33
Removing the Front Cover Unit(D560) --------------------------------------4-34 --------------------------------------4-34 Preparation ---------------------------------------------------------------------------------- 4-34 Procedure------------------------------------------------------------------------------------4-34 Procedure ------------------------------------------------------------------------------------4-34
Removing the Upper Cover (D560) ------------------------------------------4-34 ------------------------------------------4-34 Preparation ---------------------------------------------------------------------------------- 4-34 Procedure------------------------------------------------------------------------------------4-34 Procedure ------------------------------------------------------------------------------------4-34
Removing the Upper Cover (L418S/L410/L190))-------------------------4-46 Preparation ---------------------------------------------------------------------------------- 4-46 Procedure------------------------------------------------------------------------------------4-46 Procedure ------------------------------------------------------------------------------------4-46
Document Exposure/Feeder System ------------------------------------------------------------------- 4-48 Removing the DADF Unit and Reader Unit(MF4890dw/MF4880dw) 4-48 Preparation ---------------------------------------------------------------------------------- 4-48 Procedure------------------------------------------------------------------------------------4-48 Procedure ------------------------------------------------------------------------------------4-48
Removing the DADF Unit (MF4890dw/MF4880dw)------(MF4890dw/MF4880dw)----------------------4-49 ---------------4-49 Preparation ---------------------------------------------------------------------------------- 4-49
Removing the Left Cover(MF4780w/MF4770n/M Cover(MF4780w/MF4770n/MF4750/MF4730) F4750/MF4730) ---4-35 ---4-35
Procedure------------------------------------------------------------------------------------4-49 Procedure ------------------------------------------------------------------------------------4-49
Procedure------------------------------------------------------------------------------------4-35 Procedure ------------------------------------------------------------------------------------4-35
Removing the DADF Pickup Unit (MF4890dw/MF4880dw)------------4-51
Removing the Right Cover(MF4780w/MF4770n/MF4 Cover(MF4780w/MF4770n/MF4750/MF4730) 750/MF4730) -4-36 Procedure------------------------------------------------------------------------------------4-36 Procedure ------------------------------------------------------------------------------------4-36
Removing the Front Cover Unit(MF4780w/MF4770n/MF47 Unit(MF4780w/MF4770n/MF4750/MF4730) 50/MF4730) 4-37 Preparation ---------------------------------------------------------------------------------- 4-37 Procedure------------------------------------------------------------------------------------4-37 Procedure ------------------------------------------------------------------------------------4-37
Removing the Upper Cover MF4780w/MF4770n/MF4750/M MF4780w/MF4770n/MF4750/MF4730) F4730) 4-38
Preparation ---------------------------------------------------------------------------------- 4-51 Procedure------------------------------------------------------------------------------------4-51 Procedure ------------------------------------------------------------------------------------4-51
Removing the DADF Motor Unit (MF4890dw/MF4880dw) -------------4-54 Preparation ---------------------------------------------------------------------------------- 4-54 Procedure------------------------------------------------------------------------------------4-54 Procedure ------------------------------------------------------------------------------------4-54
Removing the DADF Solenoid Unit (MF4890dw/MF4880dw) ---------4-55 Preparation ---------------------------------------------------------------------------------- 4-55
Preparation ---------------------------------------------------------------------------------- 4-38
Procedure------------------------------------------------------------------------------------4-55 Procedure ------------------------------------------------------------------------------------4-55
Procedure------------------------------------------------------------------------------------4-38 Procedure ------------------------------------------------------------------------------------4-38
Removing the DADF Pickup Roller Unit (MF4890dw/MF4880dw) ---4-56
Removing the Left Cover(MF4720w/MF4712/M Cover(MF4720w/MF4712/MF4710)-----------------4-39 F4710)-----------------4-39
Preparation ---------------------------------------------------------------------------------- 4-56
Procedure------------------------------------------------------------------------------------4-39 Procedure ------------------------------------------------------------------------------------4-39
Procedure------------------------------------------------------------------------------------4-56 Procedure ------------------------------------------------------------------------------------4-56
Removing the Right Cover(MF4720w/MF4712/MF4710)---------------4-40
Removing the DADF Separation Pad(MF4890dw/MF4880dw) -------4-58
Procedure------------------------------------------------------------------------------------4-40 Procedure ------------------------------------------------------------------------------------4-40
Removing the Front Cover Unit(MF4720w/MF4712/4710)-------------4-41 Preparation ---------------------------------------------------------------------------------- 4-41 Procedure------------------------------------------------------------------------------------4-41 Procedure ------------------------------------------------------------------------------------4-41
Removing the Upper Cover (MF4720w/MF4712/MF4710) (MF4720w/MF4712/MF4710)-------------4-42 -------------4-42 Preparation ---------------------------------------------------------------------------------- 4-42 Procedure------------------------------------------------------------------------------------4-42 Procedure ------------------------------------------------------------------------------------4-42
Preparation ---------------------------------------------------------------------------------- 4-58 Procedure------------------------------------------------------------------------------------4-58 Procedure ------------------------------------------------------------------------------------4-58
Removing the Copyboard Glass(MF4890dw/MF4880dw)--------------4-61 Preparation ---------------------------------------------------------------------------------- 4-61 Procedure------------------------------------------------------------------------------------4-61 Procedure ------------------------------------------------------------------------------------4-61
Removing the Flatbed Motor Unit(MF4890dw/MF4880dw Unit(MF4890dw/MF4880dw)) ------------4-62 Preparation ---------------------------------------------------------------------------------- 4-62
Removing the Left Cover(L418S/L410/L190)------------------------------4-43
Procedure------------------------------------------------------------------------------------4-62 Procedure ------------------------------------------------------------------------------------4-62
Procedure------------------------------------------------------------------------------------4-43 Procedure ------------------------------------------------------------------------------------4-43
Removing the DADF CIS Unit(MF4890dw/MF4880dw)-Unit(MF4890dw/MF4880dw)-----------------4-64 ---------------4-64
Removing the Right Cover(L418S/L410/L190) ----------------------------4-44 ----------------------------4-44
Preparation ---------------------------------------------------------------------------------- 4-64
Procedure------------------------------------------------------------------------------------4-44 Procedure ------------------------------------------------------------------------------------4-44
Procedure------------------------------------------------------------------------------------4-64 Procedure ------------------------------------------------------------------------------------4-64
Removing the Front Cover Unit(L418S/L410/L190)-------Unit(L418S/L410/L190)----------------------4-45 --------------4-45
Removing the SADF Unit and Reader Unit(MF4870dn/MF4830d) Unit(MF4870dn/MF4830d) -- 4-66
Preparation ---------------------------------------------------------------------------------- 4-45 Procedure------------------------------------------------------------------------------------4-45 Procedure ------------------------------------------------------------------------------------4-45
Preparation ---------------------------------------------------------------------------------- 4-66 Procedure------------------------------------------------------------------------------------4-66 Procedure ------------------------------------------------------------------------------------4-66
Removing the SADF Unit (MF4870dn/MF4830d) ------------------------4-67
Preparation ---------------------------------------------------------------------------------- 4-67 Procedure------------------------------------------------------------------------------------4-67 Procedure ------------------------------------------------------------------------------------4-67
Removing the SADF Pickup Unit (MF4870dn/MF4830d)---------------4-69
Procedure------------------------------------------------------------------------------------4-90 Procedure ------------------------------------------------------------------------------------4-90
Removing the Copyboard Cover and Reader Unit (D530) -------------4-90 Preparation ---------------------------------------------------------------------------------- 4-90
Preparation ---------------------------------------------------------------------------------- 4-69
Procedure------------------------------------------------------------------------------------4-90 Procedure ------------------------------------------------------------------------------------4-90
Procedure------------------------------------------------------------------------------------4-69 Procedure ------------------------------------------------------------------------------------4-69
Removing the Copyboard Glass(D530) -------------------------------------4-92 -------------------------------------4-92
Removing the SADF Motor Unit (MF4870dn/MF4830d) ----------------4-71 Preparation ---------------------------------------------------------------------------------- 4-71 Procedure------------------------------------------------------------------------------------4-71 Procedure ------------------------------------------------------------------------------------4-71
Removing the SADF Pickup Roller 1,2 (MF4870dn/MF4830d) -------4-72
Preparation ---------------------------------------------------------------------------------- 4-92 Procedure------------------------------------------------------------------------------------4-92 Procedure ------------------------------------------------------------------------------------4-92
Removing the Flatbed Motor Unit(D530) -----------------------------------4-93 Preparation ---------------------------------------------------------------------------------- 4-93
Preparation ---------------------------------------------------------------------------------- 4-72
Procedure------------------------------------------------------------------------------------4-93 Procedure ------------------------------------------------------------------------------------4-93
Procedure------------------------------------------------------------------------------------4-72 Procedure ------------------------------------------------------------------------------------4-72
Removing the CIS Unit(D530) -------------------------------------------------4-95 -------------------------------------------------4-95
Removing the SADF Separation Pad(MF4870dn/MF4830d) ----------4-75 Preparation ---------------------------------------------------------------------------------- 4-75 Procedure------------------------------------------------------------------------------------4-75 Procedure ------------------------------------------------------------------------------------4-75
Removing the Copyboard Glass(MF4870dn/MF4830d) ----------------4-78
Preparation ---------------------------------------------------------------------------------- 4-95 Procedure------------------------------------------------------------------------------------4-95 Procedure ------------------------------------------------------------------------------------4-95
Removing the DADF Unit and Reader Unit (D560) ----------------------4-96 ----------------------4-96 Preparation ---------------------------------------------------------------------------------- 4-96
Preparation ---------------------------------------------------------------------------------- 4-78
Procedure------------------------------------------------------------------------------------4-96 Procedure ------------------------------------------------------------------------------------4-96
Procedure------------------------------------------------------------------------------------4-78 Procedure ------------------------------------------------------------------------------------4-78
Removing the DADF Unit (D560) ---------------------------------------------4-98 ---------------------------------------------4-98
Removing the Flatbed Motor Unit(MF4870dn/MF4830d)---------------4-79 Preparation ---------------------------------------------------------------------------------- 4-79 Procedure------------------------------------------------------------------------------------4-79 Procedure ------------------------------------------------------------------------------------4-79
Removing the SADF CIS Unit(MF4870dn/MF4830d) -------------------4-81 Preparation ---------------------------------------------------------------------------------- 4-81 Procedure------------------------------------------------------------------------------------4-81 Procedure ------------------------------------------------------------------------------------4-81
Removing the Copyboard Cover (MF4820d) ------------------------------4-83 ------------------------------4-83 Procedure------------------------------------------------------------------------------------4-83 Procedure ------------------------------------------------------------------------------------4-83
Removing the Copyboard Cover and Reader Unit (MF4820d) -------4-83 Preparation ---------------------------------------------------------------------------------- 4-83 Procedure------------------------------------------------------------------------------------4-83 Procedure ------------------------------------------------------------------------------------4-83
Removing the Copyboard Glass(MF4820d) -------------------------------4-85 Preparation ---------------------------------------------------------------------------------- 4-85 Procedure------------------------------------------------------------------------------------4-85 Procedure ------------------------------------------------------------------------------------4-85
Removing the Flatbed Motor Unit(MF4820d) ------------------------------4-86 ------------------------------4-86 Preparation ---------------------------------------------------------------------------------- 4-86 Procedure------------------------------------------------------------------------------------4-86 Procedure ------------------------------------------------------------------------------------4-86
Removing the CIS Unit(MF4820d) -------------------------------------------4-88 -------------------------------------------4-88 Preparation ---------------------------------------------------------------------------------- 4-88
Preparation ---------------------------------------------------------------------------------- 4-98 Procedure------------------------------------------------------------------------------------4-98 Procedure ------------------------------------------------------------------------------------4-98
Removing the DADF Pickup Unit (D560) ----------------------------------------------------------------- 4-100 Preparation -------------------------------------------------------------------------------- 4-100 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-100
Removing the DADF Motor Unit (D560) ------------------------------------------------------------------- 4-102 Preparation -------------------------------------------------------------------------------- 4-102 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-102
Removing the DADF Solenoid Unit (D560) ----------------------------------------------------------- 4-103 Preparation -------------------------------------------------------------------------------- 4-103 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-103
Removing the DADF Pickup Roller Unit (D560) ----------------------------------------------- 4-104 Preparation -------------------------------------------------------------------------------- 4-104 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-104
Removing the DADF Separation Pad (D560)---------------------------(D560)---------------------------- 4-107 Preparation -------------------------------------------------------------------------------- 4-107 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-107
Removing the Copyboard Glass (D560) ------------------------------------------------------------------- 4-109 Preparation -------------------------------------------------------------------------------- 4-109
Procedure------------------------------------------------------------------------------------4-88 Procedure ------------------------------------------------------------------------------------4-88
Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-109
Removing the Copyboard Cover (D530) ----------------------------------------------------------------------4-90 -4-90
Removing the Flatbed Motor Unit (D560)----------------------------------------------------------------- 4-110
Preparation -------------------------------------------------------------------------------- 4-110 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-110
Removing the DADF CIS Unit (D560) ------------------------------------------------------------------------- 4-112 Preparation -------------------------------------------------------------------------------- 4-112 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-112
Removing the SADF Unit and Reader Unit(MF4780w/MF4770n/ MF4750/MF4730)----------------------------------------------------------------------------------------------------------------------------- 4-114 Preparation -------------------------------------------------------------------------------- 4-114 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-114
Removing the SADF Unit (MF4780w/MF4770n/MF4750/M (MF4780w/MF4770n/MF4750/MF4730) F4730) 4-115 Preparation -------------------------------------------------------------------------------- 4-115 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-115
Removing the SADF Pickup Unit (MF4780w/MF4770n/MF4750/ MF4730)----------------------------------------------------------------------------------------------------------------------------------------------------- 4-117 Preparation -------------------------------------------------------------------------------- 4-117 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-117
Removing the SADF Motor Unit (MF4780w/MF4770n/MF4750/MF4730 4-119 Preparation -------------------------------------------------------------------------------- 4-119 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-119
Removing the SADF Pickup Roller 1,2 (MF4780w/MF4770n/MF4750/ MF4730)----------------------------------------------------------------------------------------------------------------------------------------------------- 4-120 Preparation -------------------------------------------------------------------------------- 4-120 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-120
Removing the SADF Separation Pad(MF4780w/MF4770n/MF475 Pad(MF4780w/MF4770n/MF4750/ 0/ MF4730)----------------------------------------------------------------------------------------------------------------------------------------------------- 4-123 Preparation -------------------------------------------------------------------------------- 4-123 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-123
Removing the Copyboard Glass(MF4780w/MF4770n/MF4750/MF4730) 4-126 Preparation -------------------------------------------------------------------------------- 4-126 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-126
Removing the Flatbed Motor Unit(MF4780w/MF4770n/MF Unit(MF4780w/MF4770n/MF4750/ 4750/ MF4730)----------------------------------------------------------------------------------------------------------------------------------------------------- 4-127 Preparation -------------------------------------------------------------------------------- 4-127 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-127
Removing the SADF CIS Unit(MF4780w/MF4770n/MF475 Unit(MF4780w/MF4770n/MF4750/MF4730) 0/MF4730) ---
4-129 Preparation -------------------------------------------------------------------------------- 4-129 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-129
Removing the Copyboard Cover (MF4720w/MF4712/MF4710) ---- 4-131 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-131
Removing the Copyboard Cover and Reader Unit (MF4720w/MF4712/ MF4710)----------------------------------------------------------------------------------------------------------------------------------------------------- 4-131 Preparation -------------------------------------------------------------------------------- 4-131 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-131
Removing the Copyboard Glass(MF4720w/MF4712/MF4710) ----- 4-133 Preparation -------------------------------------------------------------------------------- 4-133 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-133
Removing the Flatbed Motor Unit(MF4720w/MF4712/MF Unit(MF4720w/MF4712/MF4710) 4710) ---- 4-134 Preparation -------------------------------------------------------------------------------- 4-134 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-134
Removing the CIS Unit (MF4720/MF4712/MF4710)------------------(MF4720/MF4712/MF4710)------------------- 4-136 Preparation -------------------------------------------------------------------------------- 4-136 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-137
Removing the DADF Unit and Reader Unit (L418S/L410/L190)---- 4-138 Preparation -------------------------------------------------------------------------------- 4-138 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-138
Removing the DADF Unit (L418S/L410/L190) --------------------------------------------------- 4-139 Preparation -------------------------------------------------------------------------------- 4-139 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-139
Removing the DADF Pickup Unit (L418S/L410/L190)----------------(L418S/L410/L190)----------------- 4-141 Preparation -------------------------------------------------------------------------------- 4-141 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-141
Removing the DADF Motor Unit (L418S/L410/L190) ------------------ 4-144 Preparation -------------------------------------------------------------------------------- 4-144 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-144
Removing the DADF Solenoid Unit (L418S/L410/L190) -------------- 4-145 Preparation -------------------------------------------------------------------------------- 4-145 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-145
Removing the DADF Pickup Roller Unit (L418S/L410/L190) -------- 4-146 Preparation -------------------------------------------------------------------------------- 4-146 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-146
Removing the DADF Separation Pad (L418S/L410/L190) --------------------- 4-148 Preparation -------------------------------------------------------------------------------- 4-148
Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-148
Removing the Copyboard Glass (L418S/L410/L190)-----------------(L418S/L410/L190)------------------ 4-151 Preparation -------------------------------------------------------------------------------- 4-151 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-151
Removing the Flatbed Motor Unit (L418S/L410/L190) ------------------------------- 4-152 Preparation -------------------------------------------------------------------------------- 4-152 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-152
Removing the DADF CIS Unit (L418S/L410/L190)--------------------(L418S/L410/L190)--------------------- 4-154 Preparation -------------------------------------------------------------------------------- 4-154 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-154
Controller System --------------------------------------------------------------------------------------------------------------- 4-156 Removing the Control Panel Unit (MF4890dw/MF4880dw)---------(MF4890dw/MF4880dw)---------- 4-156 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-156
Removing the Drive Belt (MF4890dw/MF4880dw) --------------------- 4-157 Preparation -------------------------------------------------------------------------------- 4-157 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-157
Removing the Main Motor (MF4890dw/MF4880dw) ------------------- 4-160 Preparation -------------------------------------------------------------------------------- 4-160 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-160
Removing the Main Fan (MF4890dw/MF4880dw) ----------------------------------------- 4-162 Preparation -------------------------------------------------------------------------------- 4-162 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-162
Removing the Engine Controller Controller PCB(MF4890dw/MF4880dw) ---- 4-164 Preparation -------------------------------------------------------------------------------- 4-164 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-164
Removing the Main Controller PCB(MF4890dw/MF4880dw) PCB(MF4890dw/MF4880dw) ------- 4-167 Preparation -------------------------------------------------------------------------------- 4-167 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-167
Removing the FAX NCU PCB(MF4890dw/MF4880dw)--------------- 4-168 Preparation -------------------------------------------------------------------------------- 4-168 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-168
Removing the Wireless LAN PCB(MF4890dw only) ------------------- 4-168 Preparation -------------------------------------------------------------------------------- 4-168 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-168
Removing the Paper Leading Edge Sensor PCB(MF4890dw/ MF4880dw)--------------------------------------------------------------------------------------------------------------------------------------------- 4-169 Preparation -------------------------------------------------------------------------------- 4-169 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-169
Removing the Fixing Delivery/Paper Width Sensor PCB(MF4890dw/ MF4880dw)--------------------------------------------------------------------------------------------------------------------------------------------- 4-171 Preparation -------------------------------------------------------------------------------- 4-171 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-171
Removing the Toner Sensor and Multi Pickup Sensor Unit (MF4890dw/ MF4880dw)--------------------------------------------------------------------------------------------------------------------------------------------- 4-174 Preparation -------------------------------------------------------------------------------- 4-174 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-174
Removing the Speaker (MF4890dw/MF4880dw)----------------------- 4-176 Preparation -------------------------------------------------------------------------------- 4-176 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-176
Removing the Control Panel Unit (MF4870dn/MF4830d) ------------ 4-177 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-177
Removing the Drive Belt (MF4870dn/MF4830d)-----------------------(MF4870dn/MF4830d)------------------------ 4-178 Preparation -------------------------------------------------------------------------------- 4-178 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-178
Removing the Main Motor (MF4870dn/MF4830d)---------------------(MF4870dn/MF4830d)---------------------- 4-181 Preparation -------------------------------------------------------------------------------- 4-181 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-181
Removing the Main Fan (MF4870dn/MF4830d) ----------------------------------------------- 4-184 Preparation -------------------------------------------------------------------------------- 4-184 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-184
Removing the Engine Controller PCB (MF4870dn/MF4830d) (MF4870dn/MF4830d) ------ 4-186 Preparation -------------------------------------------------------------------------------- 4-186 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-186
Removing the Main Controller PCB (MF4870dn/MF4830d) (MF4870dn/MF4830d) --------- 4-188 Preparation -------------------------------------------------------------------------------- 4-188 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-188
Removing the FAX NCU PCB (MF4870dn) ----------------------------------------------------------- 4-189 Preparation -------------------------------------------------------------------------------- 4-189 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-189
Removing the Paper Leading Edge Sensor PCB(MF4870dn/MF4830d)4-190 Preparation -------------------------------------------------------------------------------- 4-190 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-190
Removing the Fixing Delivery/Paper Width Sensor PCB(MF4870dn/ MF4830d) ------------------------------------------------------------------------------------------------------------------------------------------------- 4-192
Preparation -------------------------------------------------------------------------------- 4-192 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-192
Removing the Toner Sensor and Multi Pickup Sensor Unit (MF4870dn) 4-195 Preparation -------------------------------------------------------------------------------- 4-195 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-195
Removing the Speaker (MF4870dn) ----------------------------------------------------------------------------- 4-197 Preparation -------------------------------------------------------------------------------- 4-197 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-197
Removing the Control Panel Unit (MF4820d) ----------------------------------------------------- 4-198 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-198
Removing the Drive Belt (MF4820d) ---------------------------------------------------------------------------- 4-199 Preparation -------------------------------------------------------------------------------- 4-199 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-199
Removing the Main Motor (MF4820d)-------------------------------------4-202 Preparation -------------------------------------------------------------------------------- 4-202 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-202
Removing the Engine Controller PCB(MF4820d) ------------------------------------------- 4-204 Preparation -------------------------------------------------------------------------------- 4-204 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-204
Removing the Main Controller PCB(MF4820d) -------------------------4-207 Preparation -------------------------------------------------------------------------------- 4-207 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-207
Removing the Paper Leading Edge Sensor PCB(MF4820d) -------- 4-207 Preparation -------------------------------------------------------------------------------- 4-207 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-207
Removing the Fixing Delivery/Paper Width Sensor PCB(MF4820d) -----4-210 Preparation -------------------------------------------------------------------------------- 4-210 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-210
Removing the Toner Sensor and Multi Pickup Sensor Unit (MF4820d)--(MF4820d)--4-212 Preparation -------------------------------------------------------------------------------- 4-212 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-212
Removing the Control Panel Unit (D530/D560) ------------------------------------------------- 4-214 Preparation -------------------------------------------------------------------------------- 4-214 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-214
Removing the Drive Belt (D530/D560) ----------------------------------------------------------------------- 4-216 Preparation -------------------------------------------------------------------------------- 4-216 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-216
Removing the Main Motor (D530/D560) ------------------------------------------------------------------- 4-219 Preparation -------------------------------------------------------------------------------- 4-219 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-219
Removing the Main Fan (D530/D560)------------------------------------------------------------------------- 4-223 Preparation -------------------------------------------------------------------------------- 4-223 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-223
Removing the Engine Controller PCB(D530/D560) -------------------- 4-225 Preparation -------------------------------------------------------------------------------- 4-225 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-225
Removing the Main Controller PCB(D530/D560)----------------------- 4-228 Preparation -------------------------------------------------------------------------------- 4-228 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-228
Removing the Paper Leading Edge Sensor PCB(D530/D560) --------- 4-229 Preparation -------------------------------------------------------------------------------- 4-229 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-229
Removing the Fixing Delivery/Paper Width Sensor PCB(D530/D560)---4-231 Preparation -------------------------------------------------------------------------------- 4-231 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-231
Removing the Multi Pickup Sensor Unit (D530/D560)----------------(D530/D560)----------------- 4-234 Preparation -------------------------------------------------------------------------------- 4-234 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-234
Removing the Control Panel Unit (MF4780w/MF4770n/MF4750/ MF4730)----------------------------------------------------------------------------------------------------------------------------------------------------- 4-236 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-236
Removing the Drive Belt (MF4780w/MF4770n/MF4750/MF4730) - 4-237 Preparation -------------------------------------------------------------------------------- 4-237 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-237
Removing the Main Motor (MF4780w/MF4770n/MF4750/ (MF4780w/MF4770n/MF4750/MF4730) MF4730)4-240 Preparation -------------------------------------------------------------------------------- 4-240 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-240
Removing the Engine Controller PCB (MF4780w/MF4770n/MF4750/ MF4730)----------------------------------------------------------------------------------------------------------------------------------------------------- 4-243 Preparation -------------------------------------------------------------------------------- 4-243
Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-243
Removing the Main Controller PCB (MF4780w/MF4770n/MF4750/ MF4730)----------------------------------------------------------------------------------------------------------------------------------------------------- 4-245 Preparation -------------------------------------------------------------------------------- 4-245 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-245
Removing the FAX NCU PCB (MF4780w/MF4770n/MF4750/) ----- 4-246 Preparation -------------------------------------------------------------------------------- 4-246 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-246
Removing the Wireless LAN PCB (MF4780w) --------------------------------------------------- 4-247 Preparation -------------------------------------------------------------------------------- 4-247 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-247
Removing the Paper Leading Edge Sensor PCB (MF4780w/MF4770n/ MF4750/MF4730)----------------------------------------------------------------------------------------------------------------------------- 4-248 Preparation -------------------------------------------------------------------------------- 4-248 Procedure---------------------------------------------------------------------------------- 4-248 Procedure---------------------------------------------------------------------------------Preparation -------------------------------------------------------------------------------- 4-250 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-250 Preparation -------------------------------------------------------------------------------- 4-253 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-253
Removing the Speaker (MF4780w/MF4770n/MF4750 (MF4780w/MF4770n/MF4750)) --------------- 4-255 Preparation -------------------------------------------------------------------------------- 4-255 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-255
Removing the Control Panel Unit (MF4720w/MF4712/MF4710) (MF4720w/MF4712/MF4710) --- 4-256 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-256
Removing the Drive Belt (MF4720w/MF4712/MF4710)--------------(MF4720w/MF4712/MF4710)--------------- 4-257 Preparation -------------------------------------------------------------------------------- 4-257 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-257
Removing the Main Motor (MF4720w/MF4712/MF4710)------------(MF4720w/MF4712/MF4710)------------- 4-260 Preparation -------------------------------------------------------------------------------- 4-260 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-260
Removing the Engine Controller PCB (MF4720w/MF4712/MF4710) ----4-263 Preparation -------------------------------------------------------------------------------- 4-263 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-263
Removing the Main Controller PCB (MF4720w/MF4712/MF4710) (MF4720w/MF4712/MF4710) 4-265 Preparation -------------------------------------------------------------------------------- 4-265 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-265
Removing the Paper Leading Edge Sensor PCB (MF4720w/MF4712/
MF4710)----------------------------------------------------------------------------------------------------------------------------------------------------- 4-266 Preparation -------------------------------------------------------------------------------- 4-266 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-266
Removing the Fixing Delivery/Paper Width Sensor PCB (MF4720w/ MF4712/MF4710)----------------------------------------------------------------------------------------------------------------------------- 4-269 Preparation -------------------------------------------------------------------------------- 4-269 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-269
Removing the Toner Sensor and Multi Pickup Sensor Unit (MF4720w/ MF4712/MF4710)----------------------------------------------------------------------------------------------------------------------------- 4-271 Preparation -------------------------------------------------------------------------------- 4-271 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-271
Removing the Control Panel Unit (L418S/L410/L190) ------------------------------- 4-273 Preparation -------------------------------------------------------------------------------- 4-273 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-273
Removing the Drive Belt (L418S/L410/L190) --------------------------- 4-274 Preparation -------------------------------------------------------------------------------- 4-274 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-274
Removing the Main Motor (L418S/L410/L190) ------------------------- 4-277 Preparation -------------------------------------------------------------------------------- 4-277 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-277
Removing the Main Fan (L418S/L410/L190) ------------------------------------------------------- 4-281 Preparation -------------------------------------------------------------------------------- 4-281 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-281
Removing the Engine Controller Controller PCB (L418S/L410/L190)---------- 4-283 Preparation -------------------------------------------------------------------------------- 4-283 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-283
Removing the Main Controller PCB (L418S/L410/L190) ------------ 4-286 Preparation -------------------------------------------------------------------------------- 4-286 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-286
Removing the FAX NCU PCB(L418S/L410/L190)---------------------PCB(L418S/L410/L190)---------------------- 4-286 Preparation -------------------------------------------------------------------------------- 4-286 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-286
Removing the Paper Leading Edge Sensor PCB (L418S/L410/L190) ---4-287 Preparation -------------------------------------------------------------------------------- 4-287 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-287
Removing the Fixing Delivery/Paper Width Sensor PCB (L418S/L410/
L190) ------------------------------------------------------------------------------------------------------------------------------------------------------------- 4-289 Preparation -------------------------------------------------------------------------------- 4-289 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-289
Removing the Toner Toner Sensor and Multi Pickup Sensor Unit (L418S/ L410/L190) --------------------------------------------------------------------------------------------------------------------------------------------- 4-292 Preparation -------------------------------------------------------------------------------- 4-292 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-292
Removing the Speaker (L418S/L410/L190)----------------------------- 4-294 Preparation -------------------------------------------------------------------------------- 4-294 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-294
Laser Exposure System ----------------------------------------------------------------------------------------------- 4-296 Removing the Laser Scanner Unit (MF4890dw/MF4880dw) (MF4890dw/MF4880dw) -------- 4-296 Preparation -------------------------------------------------------------------------------- 4-296 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-296
Removing the Laser Scanner Unit (MF4870dn/4830d) --------------- 4-297 Preparation -------------------------------------------------------------------------------- 4-297 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-297
Removing the Laser Scanner Unit (MF4820d) --------------------------------------------------- 4-299 Preparation -------------------------------------------------------------------------------- 4-299 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-299
Removing the Laser Scanner Unit (D530/D560)-----------------------(D530/D560)------------------------ 4-300 Preparation -------------------------------------------------------------------------------- 4-300 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-300
Removing the Laser Scanner Unit (MF4780w/MF4770n/MF4750/ MF4730)----------------------------------------------------------------------------------------------------------------------------------------------------- 4-303 Preparation -------------------------------------------------------------------------------- 4-303 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-303
Removing the Laser Scanner Unit (MF4720w/MF4712/MF4710) -- 4-304 Preparation -------------------------------------------------------------------------------- 4-304 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-304
Removing the Laser Scanner Unit (L418S/L410/L190) ----------------------------- 4-306 Preparation -------------------------------------------------------------------------------- 4-306 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-306
Image Formation System -------------------------------------------------------------------------------------------- 4-309 Removing the Transfer Roller (MF4890dw/MF4880dw) -------------- 4-309 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-309
Removing the Transfer Roller (MF4870dn/MF4830d) ----------------- 4-310
Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-310
Removing the Transfer Roller (MF4820d) --------------------------------------------------------------- 4-311 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-311
Removing the Transfer Roller (D530)------------------------------------(D530)--------------------------------------- 4-312 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-312
Removing the Transfer Roller (D560)------------------------------------(D560)--------------------------------------- 4-313 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-313
Removing the Transfer Roller (MF4780w/MF4770n/MF4750/M (MF4780w/MF4770n/MF4750/MF4730) F4730) -4-314 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-314
Removing the Transfer Roller (MF4720w/MF4712/MF4710) -------- 4-315 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-315
Removing the Transfer Roller (L418S/L410/L190) ----------------------------------------- 4-316 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-316
Fixing System ------------------------------------------------------------------------------------------------------------------------ 4-318 Removing the Fixing Assembly (MF4890dw/MF4880dw) ------------ 4-318 Preparation -------------------------------------------------------------------------------- 4-318 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-318
Removing the Fixing Assembly(MF4870dn/MF4830d)---------------- 4-321 Preparation -------------------------------------------------------------------------------- 4-321 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-321
Removing the Fixing Assembly (MF4820d)) --------------------------------------------------------- 4-324 Preparation -------------------------------------------------------------------------------- 4-324 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-324
Removing the Fixing Assembly (D530/D560)---------------------------(D530/D560)---------------------------- 4-327 Preparation -------------------------------------------------------------------------------- 4-327 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-327
Removing the Fixing Assembly (MF4780w/MF4770n/MF4750/M (MF4780w/MF4770n/MF4750/MF4730) F4730) 4-330 Preparation -------------------------------------------------------------------------------- 4-330 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-330
Removing the Fixing Assembly (MF4720w/MF4712/MF4710) ------ 4-334 Preparation -------------------------------------------------------------------------------- 4-334 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-334
Removing the Fixing Assembly (L418S/L410/L190) ------------------------------------- 4-337 Preparation -------------------------------------------------------------------------------- 4-337 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-337
Pickup And Feeding System ------------------------------------------------------------------------------------ 4-340 Removing the Pickup Unit (MF4890dw/MF4880dw)------------------- 4-340 Preparation -------------------------------------------------------------------------------- 4-340 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-340
Removing the Pickup Tray Unit (MF4890dw/MF4880dw) ------------ 4-343 Preparation -------------------------------------------------------------------------------- 4-343 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-343
Removing the Pickup Roller (MF4890dw/MF4880dw) ----------------4-345 Preparation -------------------------------------------------------------------------------- 4-345 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-345
Removing the Pickup Solenoid (MF4890dw/MF4880dw) (MF4890dw/MF4880dw) ------------ 4-346 Preparation -------------------------------------------------------------------------------- 4-346 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-346
Removing the Separation Pad (MF4890dw/MF4880dw) -------------4-348 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-348
Removing the Duplex Feed Unit (MF4890dw/MF4880dw)----------- 4-349 Preparation -------------------------------------------------------------------------------- 4-349 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-349
Removing the Duplex Solenoid (MF4890dw/MF4880dw) ------------ 4-350 Preparation -------------------------------------------------------------------------------- 4-350 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-350
Removing the Pickup Unit (MF4870dn/MF4830d) ----------------------------------------- 4-352 Preparation -------------------------------------------------------------------------------- 4-352 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-352
Removing the Pickup Tray Unit (MF4870dn/MF4830d)--------------- 4-356 Preparation -------------------------------------------------------------------------------- 4-356 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-356
Removing the Pickup Roller (MF4870dn/MF4830d) ------------------- 4-358 Preparation -------------------------------------------------------------------------------- 4-358 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-358
Removing the Pickup Solenoid (MF4870dn/MF4830d) --------------- 4-359 Preparation -------------------------------------------------------------------------------- 4-359 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-359 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-361
Removing the Duplex Feed Unit (MF4870dn/MF4830d) ------------------------- 4-362 Preparation -------------------------------------------------------------------------------- 4-362 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-362
Removing the Duplex Solenoid (MF4870dn/MF4830d)--------------- 4-363
Preparation -------------------------------------------------------------------------------- 4-363 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-363
Removing the Pickup Unit (MF4820d)-----------------------------------(MF4820d)-------------------------------------- 4-365 Preparation -------------------------------------------------------------------------------- 4-365 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-365
Removing the Pickup Tray Unit (MF4820d) ------------------------------ 4-368 Preparation -------------------------------------------------------------------------------- 4-368 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-368
Removing the Pickup Roller (MF4820d) ------------------------------------------------------------------- 4-370 Preparation -------------------------------------------------------------------------------- 4-370 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-370
Removing the Pickup Solenoid (MF4820d) ----------------------------------------------------------- 4-371 Preparation -------------------------------------------------------------------------------- 4-371 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-371
Removing the Separation Pad (MF4820d) ------------------------------------------------------------- 4-374 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-374
Removing the Duplex Feed Unit (MF4820d)----------------------------(MF4820d)----------------------------- 4-374 Preparation -------------------------------------------------------------------------------- 4-374 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-374
Removing the Duplex Solenoid (MF4820d) ------------------------------ 4-376 Preparation -------------------------------------------------------------------------------- 4-376 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-376
Removing the Pickup Unit (D530/D560) ------------------------------------------------------------------- 4-378 Preparation -------------------------------------------------------------------------------- 4-378 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-378
Removing the Pickup Tray Unit (D530/D560) (D530/D560) --------------------------- 4-381 Preparation -------------------------------------------------------------------------------- 4-381 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-381
Removing the Pickup Roller (D530/D560)-------------------------------(D530/D560)-------------------------------- 4-383 Preparation -------------------------------------------------------------------------------- 4-383 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-383
Removing the Pickup Solenoid (D530/D560)---------------------------- 4-384 Preparation -------------------------------------------------------------------------------- 4-384 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-384
Removing the Separation Pad (D530/D560)----------------------------(D530/D560)----------------------------- 4-386 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-386
Removing the Duplex Feed Unit (D530/D560) --------------------------------------------------- 4-387 Preparation -------------------------------------------------------------------------------- 4-387
Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-387
Removing the Duplex Solenoid (D530/D560) ----------------------------------------------------- 4-388 Preparation -------------------------------------------------------------------------------- 4-388 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-388
Removing the Pickup Unit (MF4780w/MF4770n/MF4750/M (MF4780w/MF4770n/MF4750/MF4730) F4730) ------4-391 Preparation -------------------------------------------------------------------------------- 4-391 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-391
Removing the Pickup Tray Unit (MF4780w/MF4770n/MF4750/MF4730) 4-394 Preparation -------------------------------------------------------------------------------- 4-394 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-394
Removing the Pickup Roller (MF4780w/MF4770n/MF4750 (MF4780w/MF4770n/MF4750/MF4730) /MF4730) ---4-396 Preparation -------------------------------------------------------------------------------- 4-396 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-396
Removing the Pickup Solenoid (MF4780w/MF4770n/MF4750/MF4730) 4-397 Preparation -------------------------------------------------------------------------------- 4-397 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-397
Removing the Separation Pad (MF4780w/MF4770n/MF475 (MF4780w/MF4770n/MF4750/MF4730) 0/MF4730) 4-400 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-400
Removing the Pickup Unit (MF4720w/MF4712/MF4710) (MF4720w/MF4712/MF4710) ------------ 4-400
Removing the Pickup Unit (L418S/L410/L190)-------------------------(L418S/L410/L190)-------------------------- 4-409 Preparation -------------------------------------------------------------------------------- 4-409 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-409
Removing the Pickup Tray Unit (L418S/L410/L190) ------------------- 4-412 Preparation -------------------------------------------------------------------------------- 4-412 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-412
Removing the Pickup Roller (L418S/L410/L190) --------------------------------------------- 4-414 Preparation -------------------------------------------------------------------------------- 4-414 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-414
Removing the Pickup Solenoid (L418S/L410/L190) ------------------------------------- 4-415 Preparation -------------------------------------------------------------------------------- 4-415 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-415
Removing the Separation Pad (L418S/L410/L190) --------------------------------------- 4-418 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-418
Removing the Duplex Feed Unit (L418S/L410/L190)-----------------(L418S/L410/L190)------------------ 4-418 Preparation -------------------------------------------------------------------------------- 4-418 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-418
Removing the Duplex Solenoid (L418S/L410/L190) ------------------- 4-420 Preparation -------------------------------------------------------------------------------- 4-420 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-420
5 Adjustment Mechanical Adjustment---------------------------------------------------------------------------------------------------5-2 --------5-2 Conrming Nip Width ------------------------------------------------------------------------------------------------------------------------ 5-2
Preparation -------------------------------------------------------------------------------- 4-400 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-400
Removing the Pickup Tray Unit (MF4720w/MF4712/MF4710)------ 4-403 Preparation -------------------------------------------------------------------------------- 4-403 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-403
Removing the Pickup Roller (MF4720w/MF4712/MF4710)---------- 4-405 Preparation -------------------------------------------------------------------------------- 4-405 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-405
Removing the Pickup Solenoid (MF4720w/MF4712/MF4710) ------ 4-406 Preparation -------------------------------------------------------------------------------- 4-406 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-406
Removing the Separation Pad (MF4720w/MF4712/MF4710 (MF4720w/MF4712/MF4710)) ------- 4-409 Procedure---------------------------------------------------------------------------------Procedure ---------------------------------------------------------------------------------- 4-409
6 Trouble Shooting Test Print ------------------------------------------------------------------------------------------------------------------------------------6-2 --------6-2 Test Print Function -------------------------------------------------------------------------------------------------------------------------------- 6-2
Trouble Shooting Items --------------------------------------------------------------------------------------------------6-3 --------6-3 Image Faults ---------------------------------------------------------------------------------------------------------------------------------------------- 6-3 Smudged/Streaked------------------------------------------------------------------------- 6-3
Version Upgrade -----------------------------------------------------------------------------------------------------------------------6-4 -6-4 Overview -------------------------------------------------------------------------------------------------------------------------------------------------------- 6-4 Preparation -------------------------------------------------------------------------------------------------------------------------------------------------- 6-4 System Requirements Requirements --------------------------------------------------------------------- 6-4 Preparation ----------------------------------------------------------------------------------- 6-5
Downloading System Software ------------------------------------------------------------------------------------------------ 6-5
Log Collector -----------------------------------------------------------------------------------------------------------------------------6-7 -----6-7 OutLine ------------------------------------------------------------------------------------------------------------------------------------------------------------ 6-7 Scope of Application ----------------------------------------------------------------------- 6-7 What to Prepare----------------------------------------------------------------------------- 6-7 Operation Procedure----------------------------------------------------------------------- 6-7 Troubleshooting ----------------------------------------------------------------------------- 6-8
7 Error Codes Overview ----------------------------------------------------------------------------------------------------------------------------------7-2 ----------7-2 Error Codes------------------------------------------------------------------------------------------------------------------------------7-3 ----------7-3
8 Service Mode Overview ----------------------------------------------------------------------------------------------------------------------------------8-2 ----------8-2 Entering Service Mode.------------------------------------Mode.------------------------------------------------------------------------------ 8-2 Service Mode Menu ---------------------------------------------------------------------------------------------------------------------------- 8-2 Screen ow of Service mode -----------------------------------------------------------------
COPIER ------------------------------------------------------------------------------------------------------------------------------------8-3 ----------8-3 DISPLAY -------------------------------------------------------------------------------------------------------------------------------------------------------- 8-3 VERSION ------------------------------------------------------------------------------------- 8-3 CCD -------------------------------------------------------------------------------------------- 8-3
I/O -------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 8-3 R-CON----------------------------------------------------------------------------------------- 8-3
ADJUST --------------------------------------------------------------------------------------------------------------------------------------------------------- 8-4 ADJ-XY---------------------------------------------------------------------------------------- 8-4 CCD -------------------------------------------------------------------------------------------- 8-4
FUNCTION -------------------------------------------------------------------------------------------------------------------------------------------------- 8-5 CLEAR ---------------------------------------------------------------------------------------- 8-5 MISC-R---------------------------------------------------------------------------------------- 8-5 MISC-P ---------------------------------------------------------------------------------------- 8-5 SYSTEM -------------------------------------------------------------------------------------- 8-5 PARAM PARA M ---------------------------------------------------------------------------------------- 8-5 SPLMAN -------------------------------------------------------------------------------------- 8-6
OPTION ---------------------------------------------------------------------------------------------------------------------------------------------------------- 8-6 BODY ------------------------------------------------------------------------------------------ 8-6 ACC -------------------------------------------------------------------------------------------- 8-6 SERIAL---------------------------------------------------------------------------------------- 8-6
COUNTER ---------------------------------------------------------------------------------------------------------------------------------------------------- 8-7
TOTAL ----------------------------------------------------------------------------------------- 8-7 TOTAL PICK-UP -------------------------------------------------------------------------------------- 8-7 FEEDER -------------------------------------------------------------------------------------- 8-7 JAM -------------------------------------------------------------------------------------------- 8-7
FEEDER-----------------------------------------------------------------------------------------------------------------------------------8-8 -----------8-8 ADJUST --------------------------------------------------------------------------------------------------------------------------------------------------------- 8-8 FUNCTION -------------------------------------------------------------------------------------------------------------------------------------------------- 8-8
FAX ------------------------------------------------------------------------------------------------------------------------------------------8-9 ----------------8-9 List of SSSW ---------------------------------------------------------------------------------------------------------------------------------------------- 8-9 List of Menu ------------------------------------------------------------------------8-10 ------------------------------------------------------------------------8-10 List of NUM ----------------------------------------------------------------------------------------------------------------------------8-11 ---------------------8-11 List of NCU -------------------------------------------------------------------------8-11 -------------------------------------------------------------------------8-11 TONE/PULSE ------------------------------------------------------------------------------ 8-11 TONE/PULSE ------------------------------------------------------------------------------ 8-11 2nd DIAL TONE ----------------------------------------------------------------------------8-12 BUSY TONE0-------------------------------------------------------------------------------8-12 TONE0-------------------------------------------------------------------------------8-12 BUSY TONE1-------------------------------------------------------------------------------8-12 TONE1-------------------------------------------------------------------------------8-12 REORDER TONE -------------------------------------------------------------------------8-13 AUTO RX ------------------------------------------------------------------------------------ 8-13 CNG DETECT ------------------------------------------------------------------------------ 8-13 RKEY -----------------------------------------------------------------------------------------8-13 PBX DIAL TONE --------------------------------------------------------------------------- 8-14 PBX BUSY TONE TONE ------------------------------------------------------------------------- 8-14
TESTMODE ------------------------------------------------------------------------------------------------------------------------------- 8-15 SYSTEM ---------------------------------------------------------------------------------------------------------------------------------------------------8-15 ---8-15 DRAM----------------------------------------------------------------------------------------- 8-15 SPEAKER -----------------------------------------------------------------------------------8-15
SCAN -----------------------------------------------------------------------------------------------------------------------------------------------------8-15 ---------8-15 ADJUST-------------------------------------------------------------------------------------- 8-15 SENSOR------------------------------------------------------------------------------------- 8-15 ADFTEST------------------------------------------------------------------------------------ 8-16 BOOKFEED--------------------------------------------------------------------------------- 8-16
FAX -----------------------------------------------------------------------------------------------------------------------------------------------------------8-16 ---------8-16 MODEM -------------------------------------------------------------------------------------- 8-16 FACULTY ------------------------------------------------------------------------------------ 8-17 FACULTY PANEL PANE L ---------------------------------------------------------------------------------------- 8-17
NETWORK ---------------------------------------------------------------------------------------------------------------------------------------------8-17 ---8-17 SSSW----------------------------------------------------------------------------------------- 8-17
Appendix Service Tools -----------------------------------------------------------------------------------------------------------------------------9-2 -----9-2 Solvent/Oil List ----------------------------------------------------------------------------------------------------------------------------9-3 --9-3 General Circuit Diagram -----------------------------------------------------------------------------------------------------9-4 --9-4 MF4890dw/MF4880dw/MF4870dn MF4890dw/MF4880dw/ MF4870dn----------------------------------------------------- 9-4 MF4830d/MF4820d ------------------------------------------------------------------------ 9-5 MF4780w/MF4770n/MF4750 ------------------------------------------------------------ 9-6 MF4780w/MF4770n/MF4750 MF4730 --------------------------------------------------------------------------------------- 9-7 MF4720w/MF4712/MF4710-------------------------------------------------------------MF4720w/MF4712/M F4710-------------------------------------------------------------- 9-8 L418S/L410/L190--------------------------------------------------------------------------- 9-9 D530 ------------------------------------------------------------------------------------------9-10 D560 ------------------------------------------------------------------------------------------9-11
General Timing Chart ---------------------------------------------------------------------------------------------9-12 --------------9-12
Safety Precautions ■ CDRH Provisions ■ Laser Safety ■ Toner Safety ■ Notes on Handling Lithium Battery ■ Notes on Assembly/ Disassembly
0
Safety Precautions > Laser Safety > Handling Laser Scanner Unit
0-2
CDRH Provisions
Laser Safety
Food and Drug CDRH (Center for Devices and Radiological Health) under FDA (Food and Drug Administration) enforced provisions of the section for laser and laser products on August
About Laser Beams
2, 1976. These provisions are applicable to all laser products manufactured or assembled
Laser radiation may be hazardous to human. The laser scanner unit mounted in this device is
after August 1, 1976 and allow only products certied their compliance with the provisions
sealed in the protective housing and the external cover to prevent laser beams from leaking
to market in the US. Each product shall have afxed the applicable label as shown below to
to the environment. As long as the device is operated under normal conditions, users are
follow the labeling requirements prescribed in CDRH provisions.
safely guarded from laser leaks.
Note that the wording included in labels is different depending on laser product classications.
Handling Laser Scanner Unit Before providing service works for the laser scanner unit and its peripherals, ensure to turn off the power of the device. Any cover with potential dangers of laser beam reection has afxed the caution label at the position shown in the gure below.
F-0-1
F-0-2
0
Safety Precautions > Notes on Assembly/Disassembly
0-3
Toner Safety About Toner Toner Toner is a nontoxic matter composed of plastic, iron and a trace of pigments.
Notes on Assembly/Disassembly Follow the items below to assemble/disassemble the device. 1. Disconnect the power plug to avoid any potential dangers during assembling/disassembling works. 2. If not specially instructed, reverse the order of disassembly to reinstall. 3. Ensure to use the right screw type (length, diameter, etc.) at the right position when
Never throw toner in ames to avoid explosion.
assembling. 4. To keep electric conduction, binding screws with washers are used to attach the grounding wire and the varistor. Ensure to use the right screw type when assembling. 5. Unless it is specially needed, do not operate the device with some parts removed.
Handling Adhered Toner • Use dry tissue paper to wipe off toner adhered to skin or clothes and wash in water. • Never use warm water for cleaning up toner toner to prevent toner particles from being able to soak into bers permanently. • Toner particles are reactive with vinyl polymers. Avoid contacting these materials.
Notes on Handling Lithium Battery
Replacing with wrong battery types may cause explosion. Follow instructions to dispose used batteries properly.
6. Never remove the paint-locked screws when disassembling.
1
Product Overview ■ Product Lineups ■ Features ■ Product Specications ■ Name of Parts
1
Product Overview > Product Lineups > Main Unit
1-2
Product Lineups
Model
MF4820d
D560
Cong
3in1 PLATEN
3in1 DADF
Yes Yes -
Yes Yes -
Main Unit Model
MF4890dw
MF4880dw
MF4870dn
MF4830d
Cong
4in1 DADF+WN
4in1 DADF+N
4in1 SADF+N
3in1 SADF Design
Design DADF SADF PLATEN 2-Sided Engine 1-Sided LAN port Wireless LAN FAX ADF
DADF SADF PLATEN 2-Sided Engine 1-Sided LAN port Wireless LAN FAX ADF
Ye s Yes Yes Yes Yes
Yes Yes Yes Yes
Yes Yes Yes Yes
Yes Yes -
T-1-2
Model
D530 3in1 PLATEN
T-1-1
Cong
Design
MF4780w/MF4770n/MF4750/ MF4730 4in1 SADF+WN(MF4780w) 4in1 SADF+N(MF4770n) 4in1 SADF(MF4750) 3in1 SADF(MF4730)
1
Product Overview > Product Lineups > Options
1-3 Model
D530
DADF SADF PLATEN 2-Sided Engine 1-Sided LAN port Wireless LAN FAX
Yes Yes -
ADF
Options
MF4780w/MF4770n/MF4750/ MF4730 Yes Yes Yes(MF4780w/MF4770n/MF4750) Yes(MF4780w) Yes(MF4780w/MF4770n/MF4750) T-1-3
Model Cong
MF4720w/MF4712/MF4710 3in1 PLATEN
L418S/L410/L190 4in1 DADF+N
Yes Yes -
Yes Yes Yes Yes
Design
DADF SADF PLATEN 2-Sided Engine 1-Sided LAN port Wireless LAN FAX ADF
T-1-4
・ Hand Set
Only FAX Model
1
Product Overview > Product Specications > Main Unit Specications
1-4
Features Features 1. Small-size, high-speed high-speed monochrome monochrome printer This equipment has a compact body that realizes high-speed print of 25 ppm (A4) / 26 ppm (LTR). 2. Automatic duplex print Automatic two-sided printing is available with standard equipped duplex unit. 3. Reduction in standby standby time and energy consumption consumption This equipment employs on-demand xing where the heater activates only during printing, resulting in a reduction in standby time and energy consumption on this mode.
Product Specications Main Unit Specication Specicationss Copyboard Device In Installation Light source Image scanning Photoreceptor Ligh Li ghtt exp expos osur ure e met metho hod d Charging method De ve vel op op in g me th th od od Transfer me method Separation method Pape Pa perr fee feed d me meth thod od
4. Realization of noise noise reduction reduction and stable image quality This equipment employs a belt drive method for transmitting the drive of the main motor. This enables lower noise and more stable image quality compared to the conventional gear drive method. (See NOTE) 5. Improved Usability In this equipment maintenance (jam removal, replacing the cartridge) can be performed by accessing one point of the delivery tray.
Paper delivery method Drum cl cleaning me method Fixing me method T on one r s up upp ly me met ho ho d T on one r l ev ev el el se se ns ns or or Do cu cu me me nt nt ty typ es es Maxi Ma ximu mum m do docu cume ment nt si size ze Imag Im age e siz size e mag magni nic cat atio ion n
Note: Changing the drive method from gear to belt reduces uneven pitch due to varied rotation speed of the photosensitive drum, which realizes stable image quality. Re ad adi ng ng r es es ol ol ut ut io n
Print resolution Warm-up Time
First print time
Fixed Desktop LED (RGB) CIS (color) OPC drum ( φ 24) Lase La serr bea beam m exp expos osur ure e (sem (semic icon ondu duct ctor or las laser er)) Roller charging T on on er er p ro ro je je ct ct io io n de ve ve lo pi pi ng ng m et et ho ho d Direct tr transfer to to tr transfer me member Curvature separation Pick Pi ckup up Tr Tray ay : Sem Semil ilun unar ar-s -sha hape ped d Pic Picku kup p Rol Rolle lerr + Pa Pad d sep separ arat atio ion n method (pressure release mechanism is not available) Multi-purpose Tray : Semilunar-shaped Pickup Roller + Pad separation method (pressure release mechanism is not available) Face-down Cleaning bl blade On-demand me method with Ce Ceramic Heater A llll- in in- on on e ca rt rt ririd ge ge wi wi th th dr dr um um Y es es (m (ma gn gne titi c s en en so so r me th th od od ) F AX AX mo mo de del s o nl nly S he he et et s, s, Bo Bo ok ok , H ei ei gh gh t o f do cu cu me me nt nt : 2 0 m m, m, We We ig ht ht : u p t o 2 Kg Kg Fixa Fi xati tion on : to A4 ADF : to LGL 100 10 0 % ma magn gni ica cati tion on A conguration, reduction : A4 -> B5, B5 -> A5, A4 -> A5 A conguration, enlargement : A5 -> A4, A5 -> B5, B5 -> A4 Inch conguration, reduction : LGL -> LRT Zoom : 25 to 400 % (1 % increment) T ex ex t/ t/ ph ph ot ot o : 30 30 0 d pi pi x 30 300 dp dpi (d (de fa fa ul ul t) t) Text/photo : 600 dpi x 600 dpi Text : 600 dpi x 600 dpi Photo : 600 dpi x 600 dpi 600 dpi x 600 dpi MF4890dw/MF4880dw/MF4870dn/MF4830d/MF4780w/MF4770n/ MF4890dw/MF4880dw/MF4870d n/MF4830d/MF4780w/MF4770n/ MF4750/L418S/L410/L190 13.5 seconds or less MF4820d/MF4730/MF4720w/MF4712/MF4710/D530/D560 12 seconds or less 6 seconds or less (A4)
1
Product Overview > Product Specications > Main Unit Specications
1-5 Print Speed
Copy speed
Available paper size in Paper Cassette
Available paper size in multipurpose tray
Paper types for Paper Cassette Multi-Purpose Tray Stack capacity of Paper Cassette Stack capacity of Multipurpose Tray Outputt tray stacking Outpu stacking capacity capacity Allowable environmental temperature Allowable humidity Duplex method Interface Hard Disk Memory
Power rating
MF4890dw/MF4880dw/MF4870dn/MF4830d/MF4820d/D530/ D560/L418S/L410/L190 25 ppm (A4) MF4780w/MF4770n/MF4750/MF4730/MF4720w/MF4712/MF4710 23 ppm (A4) MF4890dw/MF4880dw/MF4870dn/MF4830d/MF4820d/D530/ D560/L418S/L410/L190 25 cpm (A4) MF4780w/MF4770n/MF4750/MF4730/MF4720w/MF4712/MF4710 23 cpm (A4) Fixed size : A4, B5, A5, LGL, LTR, Statement, Executive, Ofcio, B-ofcio, M-ofcio, Government-Letter, Government-Legal, Foolscap, A-foolscap, Envelope COM10, Envelope C5, Envelope B5, Envelope DL Custom paper size : Width : 76.2 to 216 mm, Length : 127 to 356 mm Fixed size : A4, B5, A5, LGL, LTR, Statement, Executive, Ofcio, B-ofcio, M-ofcio, Government-Letter, Government-Legal, Foolscap, A-foolscap, Envelope COM10, Envelope Monarch, Envelope C5, Envelope B5, Envelope DL, Index Card Custom paper size : Width : 76.2 to 216 mm, Length : 210 to 356 mm 2 2 Plain paper (60 to 90 g/m ), Heavy paper (91 to 163 g/m ), Transparency, Labels, Envelope, Postcard Plain paper (60 to 90 g/m2), Heavy paper (91 to 163 g/m2), Transparency, Labels, Envelope, Postcard 2 About 250 sheets (60 to 80 g/m )
Maximum power consumption
Powe Po werr con consu sump mpti tion on
Ozone emission Dimens Dim ension ionss (W (W x D x H)
・ DADF: 390 x 367.7 x 360 mm ・ SA DF: 390 x 361.9 x 360 mm ・ Platen: 390 x 361.9 x 301 D530/D560
・ D ADF: 390 x 442.8 x 357.7 mm(D560) ・ Pl aten: 390 x 435.1 x 304.4 mm(D530) L418S/L410/L190
・ D ADF: 390 x 444.8 x 357.7 mm Weight
1 sheet 2
About 100 100 sheets (60 (60 to 80 g/m ) 10 - 30 deg C 2 0 - 80 % Yes Standard : Hi-Speed US USB/USB, Op Option :n :none Standard : none, Option : none 4MB: MF M F4890dw/MF4880dw/MF4870dn/MF4830d/MF4820d/ D 530/D560/MF4780w/MF4770n/MF4750/MF4730/MF4720w/ MF4712/MF4710 8MB: L418S/L410/L190 AC110-127 V, +/-10 % (50, 60 60 Hz +/-2 Hz) AC220-240 V, +/-10 % (50, 60 Hz +/-2 Hz)
MF4890dw/MF4880dw/MF4870dn/MF4830d/MF4820d/MF4780w/ MF4890dw/MF4880dw/MF4870d n/MF4830d/MF4820d/MF4780w/ MF4770n/MF4750/MF4730/MF4720w/MF4712/MF4710 120 V model : 1110 W or less 230 V model : 1320W or less D530/D560/L418S/L410/L190 120 V model : 1110 W or less 230 V model : 1320W or less Aver Av erag age e ene energ rgy y co cons nsum umpt ptio ion n du duri ring ng op oper erat atio ion n 120V model: 520W or less 230V model: 560W or less Standby 10W or less Sleep mode 2W or less (wired) 3W or less (wireless) Off mode 0.5W or less Initial : average 0.01 ppm or less After use : average 0.035 ppm MF4890 MF4 890dw/ dw/MF4 MF4880 880dw/ dw/MF4 MF4870 870dn/ dn/MF4 MF4830 830d/M d/MF48 F4820d 20d/MF /MF478 4780w/ 0w/ MF4770n/MF4750/MF4730/MF4720w/MF4712/MF4710
MF4890dw/MF4880dw/MF4870dn/MF4830d/MF4820d/MF4780w/ MF4770n/MF4750/MF4730/MF4720w/MF4712/MF4710
・ DADF: 12.8 Kg ・ SADF: 11.7 Kg ・ Platen: 9.9 Kg D530/D560
・ DADF: 13.2 Kg(D560) ・ Platen: 11.7 Kg(D530) L418S/L410/L190
・ DADF: 13.3 Kg (excluding toner cartridges) T-1-5
1
Product Overview > Product Specications > FAX Specications
1-6
Wireless LAN Specication Specicationss Standard IEEE802.11g/IEEE802. 11 11b/IEEE 802. 11 11n* Transmission Scheme DS-SS System/OFDM System Freq Fr eque uenc ncy y Ran Range ge 2412 24 12 to 24 2472 72 MH MHzz Data Transmission ・ IEEE802.11g Rate 6/9/12/18/24/36/48/54 Mbps ・ IEEE802.11b 1/2/5.5/11 Mbps ・ IEEE 802.11n - SGI Invalidated 20 MHz : 6.5/13/19.5/26/39/52/58.5/65 Mbps - SGI Validated 20 MHz : 7.2/14.4/21.7/28.9/43.3/57.8/72.2 Mbps - SGI Invalidated 40 MHz : 13.5/27/40.5/81/108/121.5/135 Mbps - SGI Validated 40 MHz : 15/30/45/60/90/120/150 Mbps Communica Comm unication tion Mode Mode Infras Infrastruct tructure ure Mode S ec ec ur ur it y W EP EP , W PA PA -P -P SK SK (T (T KI KI P/ P/ AE AE SS- CC CCM P) P) , W PA PA 22- PS PSK (T (T KI KI P/ P/ AE AE SS- CC CCM P) P)
Document processing speed (At A4, LTR)
FAX Specications
T ra ra ns ns mi mi ss ss io io n S pe pe ed ed Sending from Memory/ Receiving in Memory
T-1-6 WPS (Wi-Fi Protected Setup), Connection can be established by manually setting values.
SADF/DADF Specications
Document Docum ent proce processing ssing mode
Document weight Docume Docu ment nt re read adin ingg met metho hod d Docu Do cume ment nt sta stack ck cap capac acit ity y Mixed paper reading Document AE sensor Document size sensor Stamp function Document feed speed (at reading)
face-u face -up p met metho hod d Cent Ce nter er ref refer eren ence ce Sheet document Size : A4R/B5R/A5/B6 (landscape)/LGL/LTRR 2-sided : A4R/B5R/A5/LTRR/LGL/B6 (landscape only) DADF:Feed direction : 127 mm to 356 mm DADF:Width direction : 140 mm to 216 mm SADF:Feed direction : 105 mm to 356 mm SADF:Width direction : 148 mm to 216 mm SADF : 1-sided 1-sided docum document ent -> -> 1-sided 1-sided copy, 1-sid 1-sided ed docume document nt -> -> 2-sided copy DADF : 1-sided document -> 1-sided copy, 1-sided document -> 2-sided copy, 2-sided document -> 1-sided copy, 2-sided document -> 2-sided copy 2 Continuous feed 1-sided : 50 to 105 g/m 2 Contin Con tinuou uouss readin readingg 2-s 2-side ided d : 60 to 105 g/m g/m Stre St ream am re read adin ingg DADF DA DF Ssi Ssize ze : 50 She Sheet ets/ s/Ls Lsiz ize e : 10 Sh Shee eets ts SADF Ssize : 35 Sheets/Lsize : 10 Sheets None None None None 100 % 129.34 mm/s DADF 113.38 mm/s SADF
T-1-7
(MF4890dw/MF4880dw/MF4870dn/MF4780w/MF4770n/MF4750) Line Used Communication Mode Compression Method Modem Speed
*
Docume Docu ment nt se sett ttin ingg dir direc ecti tion on Docu Do cume ment nt set setti ting ng pos posit itio ion n Document type Document size
1-sided constant speed, 22 ipm (sheets/min), DADF 20 ipm (sheets/min), SADF
Fax Resolution
Public Switched Telephone Network (PSTN)*1 Super G3, G3 MH, MR, MMR Super G3: 33.6 Kbps, G3: 14.4 Kbps Automatic Fallback A pp ppr ox ox . 3 s ec eco nd nd s pe r pa ge ge *2 *2 (ECM-MMR, transmitting from the memory at 33.6 Kbps) Maximum approx. 256 pages*2 (Total pages of transmission/ reception) (Maximum number of fax jobs that can be sent from the memory: 10 jobs/ Maximum number of fax jobs that can be received into the memory: 90 jobs)
・ (Normal): 200 dpi x 100 dpi ・ (Fine): 200 dpi x 200 dpi ・ (Photo): 200 dpi x 200 dpi
Dialing
・ (Superne): 200 dpi x 400 dpi ・ One-touch keys (4 destinations) ・ Coded dialing (100 destinations) destinations) ・ Group dialing (103 groups, 50 destinations in each group) ・ Address book dialing ・ Regular dialing (with numeric keys) keys) ・ Automatic redialing ・ Manual redialing
Receiving
・ Sequential broadcast (114 destinations) destinations) ・ Automatic receptio reception n
Reports
・ Remote reception by telephone (Default ID: 25) ・ TX Results ・ Communication management management report (Auto output every 40 destinations) ・ RX Results
T-1-8 *1 The Public Switched Telephone Network (PSTN) currently supports 28.8 Kbps modem
speed or lower. Note that speeds can vary depending on the telephone line conditions. *2 Based on ITU-T (ITU Telecommunication Standardization Sector) Standard Chart No. 1, MMR standard mode.