ECAM handling flow chart including the stuff the books don't detail.
ECAM handling flow chart including the stuff the books don't detail.
Descripción: A 320 ECAM Warning System Reset
A320
Circuit breakersDescription complète
A 320 ECAM Warning System Reset
Operating system for the cockpit door of the Airbus A320 aircraftDescrição completa
Operating system for the cockpit door of the Airbus A320 aircraft
Descripción completa
Airbus A320 powerplant training manual Contents: 1. Engine-general 2. FADEC 3. Thrust control system 4. Fuel system 5. Oil system 6. Airbleed system 7. Thrust reverser system 8. Ignition...
Engine failure after V1 – continued Takeoff ENG 1 (2) Fail: • Do not interrupt ECAM if damage! • Complete at least until AGENT 1 DISH • If no damage consider relight (QRH) • Secondary failures: ELEC page → start APU!
ATA 70 Key points:
ENG 1 (2) START VALVE FAULT: • Triggered because valve not open & other engine running • PF: “Disregard, CLEAR”
• • • • • • • •
If EOSID turns: First turn before V/S=0
Consider use of TOGA thrust Consider use of A/P Use rudder trim! Use APU! Landing: Conf 3 recommended FORDEC completed on Ground Overweight landing! TCAS on TA only
ATC: • •
MAYDAY / PAN PAN Initial call: “Straight ahead, Standby!”
* ENG... SHUTDOWN
REF ’s: ENG... SHUTDOWN
Remarks:
• •
(*) If already in MCT → select CL and back to MCT Select TCAS on TA only