Diff Parts Rt40-145

HOW TO USE THIS CATALOG There are 51 basic carriers covered in this catalog: 3 2 0 0 - R -1 5 0 0 3 20 0-T-18 1 4 3 2 0 0 - N -1 8 6 0 3 20 0 -M-1 5 47 3 2 0 0 - U -1 8 1 5 3 2 0 0 -S- 1 8 6 5 3 20 0 -X-15 5 8 3 200 -V-1 8 16 3 20 0 -Z-18 7 2 3 2 0 0 -L -1 6 2 4 3 200 -W-18 1 7 3 20 0 -A-18 7 3 3 20 0 -G-1 6 45 3 2 0 0 - C -1 8 4 9 3 20 0 -B-1 8 74 3 20 0 -X-16 6 2 3 2 0 0 - D -1 8 5 0 3 2 0 0 - C -1 8 7 5 3 2 0 0 -L -1 6 7 6 3 200 -E-1 85 1 3 20 0 -D -1 87 6 3 20 0 -M-1 6 77 3 20 0-F-1 8 52 3 20 0 -E-1 8 77 3 20 0 -Q-1 7 85 3 200 -G-1 85 3 3 20 0 -G-1 87 9

32 0 0-M-1 88 5 3 2 00 -P-1 888 3 2 0 0 -R - 1 8 9 0 3 2 0 0 -D - 1 9 0 2 3 2 00 -E-19 03 3 2 00 -F-19 0 4 3 2 00 -G-1 9 05 3 2 0 0 -H - 1 9 0 6 3 2 00 -M-19 11

3 20 0 -P-1 9 14 3 2 0 0 - R -1 9 1 6 3 2 0 0 - S- 1 9 1 7 3 2 00 -T-1 91 8 3 2 00 -Z-1 92 4 3 2 0 0 - B- 1 9 7 8 3 2 0 0 - C -1 9 7 9 3 2 0 0 - D -1 9 8 0 3 2 0 0 - E- 1 9 8 1

3 2 00 -F-1 98 2 3 2 0 0 - H -1 9 8 4 32 0 0-J-1 9 86 3 2 0 0 - K- 1 9 8 7 3 2 0 0 -L -1 9 8 8 32 0 0-W-2 0 51

Major ass emb ly differences such as oil pum ps , main diff. locks, locks, etc. are indicated by the different different assembly level numbers as well as the base carrier part number. The Axle Models-CarriersFeatures Chart on Page 2 lis ts all the variations of the carriers covered in this book. Note: The carriers listed in this catalog do not include yokes. A yoke is a major assembly difference, so a carrier s old with a yoke yoke has a d ifferent ass emb ly level level num ber than the sam e carrier without the yoke. The charts charts for carriers, output shafts, and axle axle hous ings include the following information: An exploded view view of each as sem bly, bly, keyed keyed to the parts list. A description of each pa rt. Parts Parts that are are sold as ass emblies that include include other other parts. parts. Which carriers or axle models the part is used on. The quantity of the part us ed on the carrier or axle. The part number of each part. Whether the part is available in a kit.       

your carrier by usin g the Carrier Parts: Determine whi ch Chart and Figure (1 or 2) applies to your following sources of information: Identification Identification tag ins talled on the carrier. Axle Models-Carrier-Features Chart. Pictures and des criptions of the carriers in side the front cov cover er and at the beginning o f Chart 1 and Chart 2.   

covers the output s hafts for the forward axles axles of all tandem s. Output (Thru) Shafts: This chart covers Note that the output shaft assembly or its components are only sold as separate items. The output shaft is not included with the purchase of a carrier or housin g. covers ers the housing as sem blies and Housing Assemblies and Wheel End Parts: This chart cov wheel end parts for all axles. The parts are listed according to axle axle mo dels and the two wheel end series (L Series Series or R Series) that are are used on 140, 141, 143, 144 and 145 series axles. axles. axle s hafts are grouped in s ets (L.H. and R.H.) according according to the axle axle m odels they Axle Shafts: The axle are use d on. Many Many axle axle sha ft sets are use d on mo re than one axle axle mo del. The axle axle sha fts are also listed by part part number with dimensions . charts that cover cover full roun d bearing yokes, win g bearing Yokes and Flanges: There are five charts yokes, Eas y Serv Service ice yokes, yokes, RPL yokes and flanges . Each chart lists the yokes yokes or flanges used on each axle axle m odel. The yokes yokes and flanges are listed by dimens ion. axle m odel and carrier. Following Following that chart, Kits: The first chart lists all the kits a vailable for each axle the kits are listed in num erical order, and the contents contents of each kit is listed. Numerical Parts Index: This lis ts every part numbe r in the catalog along with the page(s ) on which the part is listed.

STANDARD CARRIER SUPERCESSION LIST ORIGINAL PART NUMBER A1-3200-X-1558 A18-3200-L-1624 A35-3200-L-1624 A4-3200-G-1645 A6-3200-G-1645 A9-3200-G-1645 A11-3200-G-1645 A13-3200-G-1645 A21-3200-G-1645 A27-3200-G-1645 A1-3200-X-1662 A4-3200-X-1662 A6-3200-X-1662 A7-3200-L-1676 A8-3200-L-1676 A9-3200-L-1676 A13-3200-L-1676 A14-3200-L-1676 A15-3200-L-1676 A1-3200-M-1677 A8-3200-Q-1785 A9-3200-Q-1785 A14-3200-Q-1785 A15-3200-Q-1785 A40-3200-Q-1785 A42-3200-Q-1785 A1-3200-T-1814 A6-3200-T-1814 A8-3200-T-1814

REPLACEMENT PART NUMBER B1-3200-G-1879 A1-3200-K-1987 B1-3200-D-1902 A1-3200-B-1978 A6-3200-B-1978 B1-3200-G-1645 A4-3200-B-1978 A8-3200-B-1978 B4-3200-G-1645 B1-3200-G-1645 A1-3200-H-1984 B1-3200-X-1662 A4-3200-H-1984 B2-3200-L-1676 B4-3200-L-1676 B7-3200-L-1676 B11-3200-L-1676 B8-3200-L-1676 B9-3200-L-1676 A1-3200-E-1981 B4-3200-S-1865 B7-3200-S-1865 B8-3200-S-1865 B9-3200-S-1865 B7-3200-S-1865 B4-3200-S-1865 A1-3200-B-1978 A6-3200-B-1978 A8-3200-B-1978

ORIGINAL PART NUMBER A10-3200-T-1814 A12-3200-T-1814 B1-3200-T-1814 B4-3200-T-1814 B6-3200-T-1814 B8-3200-T-1814 A1-3200-U-1815 A1-3200-V-1816 A4-3200-V-1816 B1-3200-V-1816 B4-3200-V-1816 B6-3200-V-1816 B8-3200-V-1816 A1-3200-W -1817 B1-3200-N-1860 A8-3200-S-1865 A9-3200-S-1865 A40-3200-S-1865 B1-3200-B-1874 A1-3200-C-1875 B1-3200-D-1876 A1-3200-E-1877 B1-3200-P-1888 B1-3200-R-1890 B1-3200-G-1905 B1-3200-H-1906 A1-3200-M-1911 A1-3200-P-1914

REPLACEMENT PART NUMBER A6-3200-B-1978 A1-3200-B-1978 A1-3200-B-1978 A4-3200-B-1978 A6-3200-B-1978 A8-3200-B-1978 A1-3200-E-1981 A1-3200-H-1984 A4-3200-H-1984 A1-3200-H-1984 A4-3200-H-1984 A6-3200-H-1984 A8-3200-H-1984 A1-3200-K-1987 A1-3200-C-1979 B4-3200-S-1865 B7-3200-S-1865 B7-3200-S-1865 A1-3200-D-1980 A1-3200-F-1982 A1-3200-J-1986 A1-3200-L-1988 A1-3200-K-1987 A1-3200-E-1981 A1-3200-F-1982 A1-3200-L-1988 B1-3200-T-1918 B1-3200-P-1914

The part number supercessions listed here reflect product improvements made in several k ey areas. Several of these product improvements are non-interchangeable at the component level. In these cases, kits have been developed to ease your transition to the new designs.

Rear Drive Axles Model Numbers and Designation Design ationss - OLD STY STYLE LE

Nominal Axle Load Rating (GAWR): In thousands of pounds. Individual forward and rear axles of a tandem set (D, (D, N, P, R) R) are rated as single axles. A tandem set (T (T) is rated as the combination of the two axles and a tridem set (Z (Z) as the combination of the three axles.

Gearing Type 1 - Single Speed 2 - Two Speed 3 - Helical D ouble Reduction 4 - Salisbury Single Speed 5 - Planetary Double Reduction 6 - Hub Reduction

RR 20 1 4 5

Manufacturing Location A - Australia B - Brazil (Braseixos) C - India D - Mexico (Dirona) E - Europe (C.V.C.) M - Europe (Maudsley) N - U.S.A. Main Differential Nest Type B - Special Differential C - Driver Controlled Differential Lock F - Standard Differential H - High Traction® Differential N - NoSPIN® Differential

N C Q F 123 Hub Type (See Note 3) A - Aluminum F - Ferrous N - None

Axle Type C - Single Rear Drive Axle, Coach D - Forward-Rear Axle of a Drive Tandem with Inter-Axle Differential N - Forward-Rear Axle of a Drive Tandem or Tridem without Inter-Axle Differential P - Forward-Rear Axle of a Drive Tandem with Inter-Axle Differential and Pump R - Rear-Rear Axle of a Drive Tandem S - Single Rear Drive Axle T - Tandem Drive Axle Set Z - Tridem Drive Axle Set

Brake Type C - Dura-Master® Air Disc Brake D - RDA Stopmaster® Wedge Brake (Dual Air Chambers) E - RDH Stopmaster® Wedge Brake (Dual Hydraulic Cylinders) F - RSH Stopmaster® W edge Brake (Single Hydraulic Cylinder) L - QPlus® Cam Brake N - None P - Cam-Master® "P" Series Cam Brake Q - Cam-Master® "Q" Series Cam Brake S - RSA Stopmaster® W edge Brake (Single Air Chamber) T - Cam-Master® "T" Series Cam Brake W - Cam-Master® "W" Series Cam Brake

Axle Specification Number Identifies specific customer axle configurations (variations from the original axle design). For information about the variation, see the Bill of Material for that specific axle model.

Carrier Type Carrier size. Larger numbers indicate a higher GCW rated carrier: i.e., larger ring gear, etc. (Also see Tridem Axle Note 2 below.)

NOTE 1: If a complete axle designation is not required, use the first seven positions of the model designation to identify the basic axle model. EXAMPLES OF BASIC AXLE MODELS: Single le Rear ear Driv Drive e, 17,0 17,000 00 lb., lb., Sin Single gle Spe Speed, ed, 15" Rin Ring Gea Gear, RS 17 140 - Sing 140 Carrier Model. RT 48 380 - Tandem Drive Axle Set, 48,000 lb., Helical Double Reduction, 19.62" Ring Gear, 380 Carrier Model. xle S et et , 60, 00 000 lb. , S in ingle S pe peed, Includes a RZ 60 164 - Tridem Drive A xl 150 Series Forward Rear or First Ax Axle and a 145 Series Tandem Axle Set as the Second and Third Axles.

Axle Design Variation Indicates axle design level or variation, (e.g., RS 23 161 has a thicker wall housing than the RS 23 160). For information see the Bill of Material for that specific axle model. (Also see Tridem Axle Note 2 below.)

NOTE 2, FOR TRIDEM AXLES ONLY: For a Tridem Drive Axle Set (RZ), the number in the sixth position designates the carrier in the first axle. The num ber in the the seve sevent nth h posi positi tion on desi desig gnate nates s the the carriers in the second and third axles. NOTE 3: S om om e axle designati on ons or specifications do not ha have a hub type code.

Rear Rear Drive Dri ve Axles Axl es Model Numbers and Designations Designati ons - NEW STYLE STYLE RELATIVE GEARING SIZE OR SERIES

AXLE MODEL TYPE S = Single Rear (Solo) X = Front Drive Steer D = Fwd Rear w/IAD N = Fwd Rear less IAD

0 = No Gearing 1 = 292/347 2 = 337/387 3 = TBD 4 = 381/432 5 = 415/432 6 = 432/457

BRAKE TYPE B = "B" Frame Brake C = Air Disc Brake D = Wedge Brake (Dual Air Chambers) E = Wedge Brake (Dual Hydraulic Cylinders) F = Wedge Brake (Single Hydraulic Cylinder) G = DuraPark Hydraulic Drum

7 = 45 7 8 = 460/498

H = Quadraulic Disc K = Disc Plus Air Disc L = Q Plus™ Cam Brake N = No ne P = "P" Series Cam Brake

P = Fwd Rear w/Pump R = Re a r R ea r T = Tandem Drive Z = Tridem Drive C = Coach H = High Entry

MFG. LOCATION N = North America S = South America E = Europe A = Australia/Asia/Africa

Q = "Q" Series Cam Brake R = Cast Plus™ Brake S = Wedge Brake (Single Air Chamber) T = "T" Series Cam Brake W = "W" Series Cam Brake

M x - xx - 1 4 x x N - x - N 12 123 - xxxx - xxxx M = Meritor

Ratio 1

Ratio 2

CARRIER VARIATION

SPEC. NO.

AXLE TYPE 0 = No Carrier 1 = Single Speed 2 = Two Speed 3 = Helical Dbl Red 4 = Salisbury

A = Aluminum D = Ductile M = Ductile R ear (Amboid) N = No Carrier

Includes: TRACK, PARKING BRAKE, OTHER

5 = Planetary Dbl Red 6 = Hub Reduction 7 = Portal 9 = Single Speed with Torque Output Limited Engine

R = Ductile Front Drive Axle Carrier (Right Hand) T = Ductile Telma

WHEEL END/BRAKE ATTACHMENT/DIFFERENTIAL A = Conventional Spindle/Conventional Brake/Standard Diff B = Conventional Spindle/Conventional Brake/DCDL C = Conventional Spindle/Conventional Brake/No-Spin D = Conventional Spindle/Conventional Brake/Other Diff E = Unitized Spindle/Conventional Brake/Standard Diff F = Unitized Spindle/Conventional Brake/DCDL G = Unitized Spindle/Conventional Brake/No-Spin

GAWR xx = GAWR GAWR (000) (000) Pounds Pounds or Tonnes Tonnes (dependent on mfg. location)

HSG WALL 0 = Cast 1 = TBD 2 = 8 mm 3 = 9.5 /1 /10 .0 .0 mm mm 4 = 11 mm 5 = 12.7/13.0 mm mm 6 = 14.3 mm 7 = TBD 8 = 16 mm 9 = TBD

H = Unitized Spindle/Conventional Brake/Other D iff J = Conventional Spindle/Integral Brake/Standard Diff K = Conventional Spindle/Integral Brake/DCDL L = Conventional Spindle/Integral Brake/No-Spin M = C on onven tition al al Spindle/Integra l Bra ke ke /O /Other D iff N = Unitized Spindle/Integral Brake/Standard Diff P = Unitized Sp Spindle/Integral Br Brake/DCDL Q = Unitized Spindle/Integral Brake/No-Spin R = Unitized Spindle/Integral Brake/Other Diff S = Bolt-On Conventional Spindle/Conventional Brake/No Diff

TABLE OF CONTENTS

Page

Carriers & Features of Current Axle Models ……………………… 2 Forward Carriers of Tandem Axles ………………………………… 3 Carriers for Single Axles and Rears of Tandem Axles ………… 10 Output (Thru) Shafts…………………………………………………… Shafts ……………………………………………………20 20 Housing Assemblies and Wheel End Parts ……………………… 21 Axle Shafts……………………………………………………………… Shafts ……………………………………………………………… 22 Yokes and Flanges Full Round Bearing Yokes…………………………………………27 Yokes………………………………………… 27 Wing Bearing Yokes……………………………………………… 28 Easy Service Yokes……………………………………………… 29 RPL Yokes……………………………………………………...… 30 Companion Flanges……………………………………………… 31 Axle Model to Carrier to Kit Cross Reference …………………… 32 Service Kits……………………………………………………………… Kits ………………………………………………………………38 38 ………………………………………………… 53 Numerical Parts Index Index………………………………………………… Warranty………………………………………………………………… Warranty ………………………………………………………………… 60

1

CURR CURRENT AXLE AXLE MODELS ELS - CARRIERS CARRIERS - FEATURES FEATURES MAIN DIFF.

NO SPIN ® .

OIL

AXLE . . .

R S-16-140

A 23-3200-M -1547

1.85" - 36

R S-17-140 (SIN GL GLE A XL XLE)

B 2-3200-L-1676 B 11-3200-L-1676

2.00" - 39

RS-16-141 (SINGLE (SINGLE AXLE) RS-17-141 (SINGLE (SINGLE AXLE)

B7-3200B7-3200-S-1 S-1865 B7-3200B7-3200-S-1 S-1865

R S-17-145 R S-19-145

B 7-3200-L-1676 B 7-3200-S-1865

(SIN GL GLE A XL XLE)

B 99-3200-L-1676 B 9-3200-S- 1865

R S-17-144

B 4-3200-L-1676

R S-19-144 R S-21-145

B 4-3200-S-1865 B 1-3200-G-1879

(SIN GL GLE A XL XLE)

B 88-3200-L-1676 B 8-3200-S- 1865

R T -34-145

F wd

R D -17-145

R ear

R R -17-145

B 7-3200-L-1676 B 7-3200-S-1865

F wd

R D -20-140

2.79 thru 3.21 3.42 t hru 7.17 7.17

 

2.10" - 41

2.64 t hru 3.21 3.42 t hru 7.17 2.64 t hru 7.17 7.17



2.64 thru 3.21 3.42 t hru 7.17 7.17

 

2.00" - 39

2. 2.79 t hru 7.17

  



2.79 t hru 3.21 3.42 t hru 7.17 2.79 thru 3.21 3.42 t hru 7.17 7.17

 

B 4-3200-E- 1851 A1 A 1-3200-B -1978



2.10" - 41

2. 2.64 t hru 7.17

B 1-3200-G-1645 Rear MT -40-1 -40-143 Fwd Fwd

RR-20-1 RR-20-140 M D-20-1 D-20-143

R T -34-144

F wd

R EVER SE

B4-3200B4-3200-S-1 S-1865 A1-32 A1-320000-B-1 B-1978 A 1-320 0-E- 1981 A 1-3200-C -1979 *

R ear



M P-20-143 M R -20-143M

A1-3200 A1-3200-H-1 -H-1984 A -3200-W-2051

M R -20-143

B 4-3200-L-1676 B 4-3200-S-1865 B 1-3200-M -1885 *

2.79 t hru 7.17

R D -17-144

A 1-3200-B -1978

2.64 t hru 7.17

R T -38-144

R D -19-144

B 1-3200-G-1645

RT-40 RT-40-1 -145

RD-20 RD-20-1 -145

A1-320 -32000-EE-1 1981 981



2.64 t hru 4.11 2.64 t hru 3.21 3.42 t hru 7.17

R EVER SE 

A4-3200-B -1978 B 1-320 0-E- 1903 A 1-3200-C -1979 *



REVERSE



B 1-320 0-S- 1917 *



B 1-3200-F -1852 RP -17-144 RP -19-144

A1-3200 A1-3200-K-1 -K-1987 B1-3200 B1-3200-D-1 -D-1902

RP -20-145

A1-3200 A1-3200-H-1 -H-1984 B 1-320 0-X- 1662

 







R R -17-144 R R -19-144

B 4-3200-L-1676 B 4-3200-S-1865

RR-20-145

B1-3200 B1-3200-G-1 -G-1879

REVERSE



REVERSE



A 4-3200-H -1984 B 1-320 0-G- 1853 R ear



 



2.64 t hru 3.21 3.42 t hru 7.17 2.64 t hru 7.17 7.17



B 8-3200-L-1676 B 8-3200-S- 1865

2.64 thru 3.21 3.42 t hru 7.17 7.17

 

B 1-3200-M -1885 *

R T -44-145

F wd

2.79 t hru 7.17

B 1-320 0-R -191 -1916 6*

 

R D -22-145

B 1-3200-D -1850 B 1-320 0-E- 1851 A 1-3200-D -1980 A 1-3200-F -1982 A1-3200 A1-3200-J-1 -J-1986



RP -22-145

A 1-320 0-L- 1988 B 1-320 0-T -191 -1918





RR -22-1 -22-145





B1-32 B1-320000-A-1 A-1873 B6-3200-A -1873 B 1-3200-F -1904

 

B 1-3200-Z -1924 * Indicates Indicates aluminum carrier housing. (No t available in 2.64 ratio .) 2

2.64 thru 3.21 3.42 t hru 7.17 7.17 3.42 t hru 5.86



B 1-320 0-P -191 -1914 4 Rear

R EVER SE



B 9-3200-L-1676 B 9-3200-S- 1865 R T -40-140

3.42 t hru 7.17

2.79 t hru 3.21 3.42 t hru 7.17

A8-3200-B -1978 B 6-3200-F -1852 A6-3200-H-1 A6-3200-H-1984 A 8-3200-H -1984

STD. IAD SHIFT )



B 4-3200-G-1645 A6-3200-B -1978

RP -17-145

RATIOS .



REVERSE



REVERSE

CHART 1 CHART FORWARD CARRI CARRIER ERS S OF TANDEM TANDEM AXLES AXLES (Use (Use wit with h Figure Figure 1, Insi Inside de Fro Front nt Cover) VISUAL IDENTIFICATION OF FORWARD CARRIERS IAD SH IFTER : BOL T ON FOR 1 6 2 4 , 1 9 0 2 , 1 9 1 1 , 1 9 1 8 SC R EW-IN FOR 1 8 1 7 , 1 8 7 7 , 1 8 8 8 , 1 9 0 6 , 1 9 8 7 AN D 1 9 8 8 C AR R IERS OIL FIL TER

IAD SH IFTER : BOLT ON FOR 1 6 7 7 AN D 1 9 0 3 SC REW-IN FOR 1 8 1 5 , 1 8 7 5 , 1 8 9 0 , 1 9 0 5 , 1 9 8 1 AN D 1 9 8 2 C AR R IERS N O OIL FIL TER

D IFF. L OCK: BOLT-ON FOR 1 6 2 4 AN D 1 8 1 7 C AR R IERS SC REW-IN FOR 1 8 7 7 , 1 8 8 8 , 1 9 0 2 , 1 9 0 6 , 1911, 1918, 1987 AND 1 988 CARRIERS FORWAR D CAR R IERS WITH IAD , D IFF. L OC K AN D OIL PU MP: 3 2 00 00-L -1 -1 62 62 4 , 3 2 00 00 -W-1 8 17 17 , 3 2 0 0-E-1 8 7 7 , 3 2 0 0 -P-1 8 8 8 , 3 2 0 0-D-1 9 0 2 , 3 2 0 0-H -1 9 0 6 , 3 2 0 0-M -1 9 1 1 , 3 2 0 0 -T-1 9 1 8 , 3200-K-1987, 3200-L-1988 IAD SH IFTER : BOL T-ON FOR 1 6 6 2 AN D 1 9 1 4 SC R EW-IN FOR 1 8 1 6 , 1 8 5 3 , 1 8 7 6 , 1 8 9 4 AN D 1 9 8 6 C AR R IERS OIL FIL TER

DIFF. LOCK: BOL T-ON FOR 1 6 7 7 AN D 1 8 1 5 C AR R IERS SC REW-IN FOR 1 8 7 5 , 1 8 9 0 , 1 9 0 3 , 1 9 0 5 , 1 9 8 1 AN D 1 9 8 2 CAR R IERS FORWARD CARRIERS WITH IAD AND D IFF. L OCK WITHOUT OIL PU MP 3 2 00 00-M-1 6 77 77 , 3 20 200 -U -U --1 1 8 15 15 , 3 20 200 -C -C-1 8 75 75 , 3 2 0 0 -R -1 8 9 0 , 3 2 0 0-E-1 9 0 3 , 3 2 0 0 -G-1 9 0 5 , 3 2 0 0-E-1 9 8 1 , 3 2 0 0 -F-1 9 8 2 IAD SH IFTER : BOLT ON FOR 1 6 4 5 C AR R IER SC REW-IN FOR 1 8 1 4 , 1 8 5 2 , 1 8 6 0 , 1 8 7 4 , 1 9 1 7 , 1 9 7 8 , 1 9 7 9 AN D 1 9 8 0 NO OIL FIL TER

NO D IFF. L OC K FORW RWAR ARD D CARR CARRIIER ERS S WI WITH IAD IAD AND AND OI OIL PUMP PUMP WITHOU T D IFF. L OCK: 3 2 00 00-X-1 66 66 2, 2, 3200320 0-VV-181 1816, 6, 320 32000-GG-185 1853, 3, 320 32000-DD-187 1876, 6, 3 2 0 0 -P-1 9 1 4 , 32 32 0 0 -H-1 9 8 4 , 32 32 0 0 -J-1 9 8 6

N O D IFF. L OCK FORW RWAR ARD D CARRI CARRIER ERS S WI WITH IAD IAD WI WITHOUT HOUT DIF DIFF. L OC OC K OR OIL PU MP: 3 2 00 00-G-1 6 45 45 , 3 20 200 -T -T-1 81 81 4, 4, 3200320 0-F F-1852 -1852,, 320 32000-NN-186 1860, 0, 320 32000-BB-187 1874, 4, 320 32000-SS-191 1917, 7, 3 2 0 0 -B-1 9 7 8 , 32 32 0 0 -C-1 9 7 9 , 32 32 0 0-D -1 9 8 0

THE FOLLOWING FOLLOWING CARRIERS AR E EQUIPPED WITH WITH A THR UST SCREW: 3200-A-1873, 3200-B-1874, 3200-C-1875, 3200-D-1876, 320 0-E-1877, 3200-F-1904, 3200-F-1904, 3200-G-1905, 3200-H-1906, 3200-M-1911, 3200-T-1918, 3200-P-1914, 3200-D-1980, 3200 -F-1982, -F-1982, 3200-J-1986, 3200 -L-1988 THE FOLLOWING FOLLOWING CARRIERS AR E MACHINED FOR INTERNAL ABS SENSORS: 3200-F-1852, 3200-G-1853, 3200-S-1917 3

FORWARD CARRIERS OF TANDEM AXLES ITEM 1 1A 4 5 6 7, 10

8

DESCRIPTION Nut - input yoke and shaft Washer - input shaft nut Capscrew - input bearing cage Washer - input bearing cage Oil seal - input bearing cage

9

10 11

Cup - input shaft bearing - outer Cone - input shaft bearing - outer Baffle - oil Washer - oil baffle Capscrew - oil baffle Input shaft and nut assy. Input shaft, nut, ball assy.

16 17 18

3" I.D. 3.25" I.D.

Bearing cage and cup assy. - input

Shim - input bearing cage .075mm/.003 inch .125mm/.005 inch .250mm/.010 inch O-ring - input bearing cage

12 13 14 15, 1

REMARKS Included in KIT 2826 Included in KIT 2637 Included in KIT 2826 Included in KIT 2637

Thrust washer - helical drive gear Helical gear and forward side gear Diff. case and pinion nest assy. - inter-axle

Included in KIT 2429

Less pump With pump

Less pump 2"-39 spline Less pump 2.38"-46 spline 2.38"-46 spline. With pump Pump driven off flats on the input shaft. 2"-39 spline Pump driven off splines on the input shaft. 2"-39 spline

Bolted

Bolted

29

29A 29B

Case halves and fastener hardware Bolt Washer Spider Pinion gear Pinion gear thrust washer Snap-ring - inter-axle differential Clutch collar - inter-axle diff. Side gear - inter-axle diff. Shift fork - inter-axle diff. Cone - rear side gear bearing Cup - rear side gear bearing Adjusting screw - shift shaft Jam nut - adjusting screw Spring - shift shaft return Shift shaft - inter-axle differential

Shift assy. - inter-axle diff. air

Snap ring Spring - shift

All prior to 8/91

PART NUMBER 40-X-1233 40-X-1237 1 1229-N-1730 1229-T-1736 7 MS-212045-1 7 1229-C-1511 1 R945008 A1-1205-X-2728 1 A-3226-V-1296 A-3226-B-1224 A-3226-D-1226 A-3226-Z-1222 Use as 2203-K-9241 req. 2203-L-9242 2203-M-9243 1 5-X-13431 1 ea. 5-X-13431 5-X-10341 1 3920 1 JM-511945 JM-511946 1 3221-P-1004 3 1229-E-1669 3 MS-208016-1 1 KIT 28342 A-3297-U-1347 A-3297-T-1346 KIT 28352 KIT 28332 1 1 1

All All All All All All All except "reverse-air" All except "reverse-air" Included in KIT 2686 and KIT 2445 Included in KIT 2445

1229-S-4985 KIT 4007 A-3235-N-2380

A-3235-W-2025

1 8 1 4

All

Bolt-on style, Navistar only (reverse-air) Bolt-on style, Navistar only (reverse-air) Bolt-on style, serviced as assembly only Screw-in style, serviced as assembly only Bolt-on style, Navistar only (reverse-air)

QTY 1

All from 8/91 to 11/93


1 5-X-1034 is used used in pump groove. 5-X-1343 is used in input cage. 4

All All after 11/93 All prior to 11/93 All w/o pump All w/o pump All w/o pump All prior to 11/93 All after 11/93

All All 1978, 1979, 1980, 1981, 1982, 1984, 1986, 1987, 1988 carriers after 10/98 All except 1624 / prior to 10/98 1624 carrier only For bolted version only. All after 10/98

Welded

18A 18B 18C 18D 18E 18F 19 20 21 22 23 24 25 26 27 28

CARRIER All after 11/93 All prior to 11/93 All after 11/93 All prior to 11/93 All All All prior to 11/93 All after 11/93 All w/o pump after 11/93 All w/o pump prior to 11/93 All with pump after 11/93 All with pump prior to 11/93 All

1 1 1 1 1 1 1 1 1 1

1

KIT 2743 A2-3235-N-2380 MS210045A-1 1229-K-1597 3278-A-1119 2233-U-1035 1229-T-1606 2297-E-5335 3107-M-1183 2234-R-1188 3296-Z-1326 JLM-710949C JLM-710910 41-X-1208 MN-312-1 2258-U-411 2244-K-1025 2244-D-1070 A-3261-R-1084 A-3261-L-350 KIT 2825


1 1

1229-P-4280 2258-E-1175

2 Must change input yoke yoke to 2.35"-46 spline. spline. See Service Kit Kit section for Bill of Material details.

FORWARD CARRIERS OF TANDEM AXLES ITEM 29C 29D 29E 29F 29G 29H 29J 29K 29L 29M 29N 30 31, 56, 57

DESCRIPTION Gasket - shift assembly Cover - shift assembly Washer - shift assembly capscrew Capscrew - shift assembly short Capscrew - shift assembly to carrier O-ring O-ring O-ring Housing - shift Piston - shift assembly Snap ring Capscrew - air shift assembly Diff. carrier er and cap assy. Kit incl. ncl. carrier and cap assy. and screw-in IAD shifter. Main diff. lock components included where applicable

REMARKS Bolt-on style, Navistar only (reverse-air)

CARRIER Included in KIT 2445

1624, 1645, 1662, 1677 With pump and thrust screw, w/o 3200-P-1914 main diff. lock. Bolt-on reverse IAD shifter With pump, diff. lock and bolt-on All 1624 except Navistar IAD shifter (Reverse-shift) With pump, main diff. lock and 3200-T-1918 thrust screw. Bolt-on With pump, w/o diff. lock with All 1662 except Navistar bolt-on IAD shifter (Reverse-shift) With pump, w/o diff. lock with 3200-D-1876, 3200-J-1986 screw-in and IAD shifter, with thrust screw With pump, w/o diff. lock, with 3200-X-1662 bolt-on IAD shifter and thrust (Reverse-shift only) screw With pump, w/o diff. lock, with 3200-V-1816, 3200-H-1984 screw-in IAD shifter With pump, w/o diff. lock, with 3200-G-1853 screw-in IAD shifter, for use with internal ABS sensor With pump, with bolt-on diff. lock 3200-L-1624, 3200-D-1902 and IAD shifter, with thrust screw (Reverse-shift only) 3200-M-1677, 3200-E-1903 (Reverse-shift only) With pump, with screw-in diff. 3200-W-1817, 3200-P-1888, lock and IAD shifter 3200-K-1987 With pump, with screw-in diff. 3200-E-1877, 3200-H-1906, lock and IAD shifter, with thrust 3200-L-1988 screw Without pump and main diff. 3200-N-1860, 3200-C-1979 lock, Aluminum carrier Without pump and main diff. 3200-S-1917 lock, Aluminum carrier (for ABS) (Reverse-shift only) Without pump or diff. lock for use 3200-F-1852 with internal ABS sensor, screwin IAD shifter Without pump or diff. lock, for 3200-G-1645 use with bolt-on IAD shifter and (Reverse-shift only) thrust screw Without pump or diff. lock, with All 1645 except Navistar bolt-on IAD shifter (Reverse-shift) Without pump or diff. lock, with 3200-T-1814, 3200-B-1978 screw-in IAD shifter Without pump or diff.lock, with 3200-B-1874, 3200-D-1980 screw-in IAD shifter and thrust screw Without pump, with diff. lock and All 1677 except Navistar bolt-on IAD shifter (Reverse-shift) Without pump, with screw-in diff. 3200-U-1815, 3200-R-1890, lock and IAD shifter 3200-E-1981 Without pump, with screw-in diff. 3200-C-1875, 3200-G-1905, lock and IAD shifter, with thrust 3200-F-1982 screw

QTY 1 1 6 2 4 1 1 1 1 1 1 1 1

PART NUMBER 2208-R-1058 3266-Q-1161 MWA-506 41-X-1080 MS-206060-1 5-X-1196 5-X-1197 5-X-1195 3261-R-1084 2230-D-1096 1229-W-1245 41-X-1209 A2-3200-P-1914

KIT 2705 A2-3200-T-1918 KIT 270718 A2-3200-J-1986

A2-3200-X-1662

A2-3200-H-1984 A2-3200-G-1853

A2-3200-D-1902 A2-3200-E-1903 A2-3200-K-1987 A2-3200-L-1988

A2-3200-C-1979 A2-3200-S-1917 A2-3200-F-1852

A2-3200-G-1645

KIT 2706 A2-3200-B-1978 A2-3200-D-1980

KIT 2704 A2-3200-E-1981 A2-3200-F-1982

18 For replacement information, contact contact Information Services at 888-725-9355. 5

FORWARD CARRIERS OF TANDEM AXLES ITEM 32 34 35, 44, 45

42 43 44

DESCRIPTION Jam nut Thrust screw Drive gear, pinion and nut 2.64 Ratio assembly 2.79 Ratio 2.93 Ratio 3.07 Ratio 3.21 Ratio 3.42 Ratio 3.58 Ratio 3.73 Ratio 3.90 Ratio 4.11 Ratio 4.33 Ratio 4.56 Ratio 4.63 Ratio 4.88 Ratio 5.29 Ratio 5.86 Ratio 6.14 Ratio 6.43 Ratio 6.83 Ratio 7.17 Ratio 3.36 Ratio 3.55 Ratio 3.70 Ratio Cone - drive pinion inner bearing Cup - drive pinion inner bearing Shim - pinion inner .075mm/.003 inch bearing cup .125mm/.005 inch .250mm/.010 inch Spacer - pinion bearing inner Gear - helical driven Spacer - pinion bearing 5.30mm/.209 inch (variable thickness) 5.33mm/.210 inch 5.35mm/.211 inch 5.38mm/.212 inch 5.40mm/.123 inch 5.50mm/.217 inch 5.60mm/.220 inch 5.70mm/.224 inch 5.80mm/.228 inch 5.90mm/.232 inch 6.00mm/.236 inch 6.10mm/.240 inch 6.13mm/.241 inch 6.15mm/.242 inch 6.18mm/.243 inch 6.20mm/.244 inch Cup - drive pinion outer bearing Cone - drive pinion outer bearing Washer - drive pinion nut

45

Nut - drive pinion

46 47 48

Cover - drive pinion Washer - drive pinion cover Capscrew - drive pinion cover

49

Adjusting ring - diff. bearing

50

Cup - diff. bearing

36 37 38

39 40 41

1 3 5 7 6

L.H. L.H. and R.H. R.H. L.H. L.H. and R.H. R.H.

Not available available in the aluminum carrier. Replaces B-41516-1 (3.91 ratio) Used in special 145 applications only. Included in KIT 2638.

REMARKS

CARRIER

QTY 1 1 Use 1 as req.

Some models may not be available in all ratios

Amboid gearing to be used only if there is a rear/rear Amboid carrier. All All Included in KIT 1647 and KIT 2429


Use with 40-X-1145 Use with 40-X-1233 M45x1.5-6H thd. M50x2-6H thd.

All

All All All

All All 145 series only 140, 144, 145 series only 140, 144, 145 series only 145 series only All All All except aluminum Aluminum only All with diff. lock All without diff. lock All with diff. lock All with diff. lock All without diff. lock All with diff. lock

2 Replaces A-39908-3 (2.80 ratio) 4 Replaces B-41518-1 (4.10 ratio) 6 2.10"-41 spline

PART NUMBER 40-X-1016 41-X-1371 B-41718-11 A-41676-12 A-41104-1 A-41508-1 A-41510-1 B-41276-1 B-41512-1 B-41514-1 B-41678-13 B-41680-14 B-41278-1 B-41562-1 B-41280-1 B-41282-1 B-41284-1 B-41466-1 A-41468-1 A-41470-1 A-41472-1 A-41474-1 B-42214-1 B-42216-1 B-42218-1 1 H715334 1 H715311 Use as 2203-F-2788 req. 2203-G-2789 2203-H-2790 1 1244-V-1764 1 3892-N-4902 Use 2 2203-D-9806 as req. 2203-E-9807 2203-F-9808 2203-G-9809 2203-H-9810 2203-J-9812 2203-K-9813 2203-L-9814 2203-M-9815 2203-N-9816 2203-P-9818 2203-Q-9819 2203-R-9820 2203-S-9821 2203-T-9822 2203-U-9823 1 72487 1 72212C 1 1229-G-40635 1229-W-45217 1 40-X-12337 40-X-11455 1 3266-C-1095 5 1229-K-1597 5 MS-210020-1 MS-210030-1 1 2214-Y-1039 2 2214-C-1095 1 2214-C-1095 1 1228-L-1130 2 JM-716610 1 JM-716610

FORWARD CARRIERS OF TANDEM AXLES ITEM 51

DESCRIPTION Cone - diff. bearing

52 53 54, 52, 53

REMARKS L.H. L.H. and R.H. R.H.

Capscrew - main diff. case Washer - main diff. case Case assy. standard - main diff.

Included in KIT 2819 Ratios 2.64, 2.79, 2.93 Ratios 3.07, 3.21, 3.36

54, 52, 53, Case assy. with ABS tubes - main diff. 204, 205, 206

54, 52, 53, 59, Case & nest assy. standard - main diff. 60, 62, 63

54, 52, 53, 59, Case & nest assy. with ABS tubes - main diff. 60, 62, 63, 204, 205, 206

54, 52, 53, 63A

Case & nest assy. with NoSPIN diff. - main diff.

Ratios 3.42, 3.55, 3.58, 3.70, 3.73, 3.90, 4.11 (All except RT44145 tandem) Ratios 3.42, 3.58, 3.73, 3.90, 4.11 (RT44145 tandem only) Ratios 4.30, 4.56, 4.63, 4.88, 5.29, 5.86, 6.14, 6.43, 6.83, 7.17 (RT44145 tandem only) Ratios 4.30, 4.56, 4.63, 4.88, 5.29, 5.86, 6.14, 6.43, 6.83, 7.17 (Except RT44145 tandem) Ratios 3.07, 3.21 Ratios 3.42, 3.58, 3.73, 3.90, 4.11 (All except RT44145 tandem) Ratios 4.30, 4.56, 4.63, 4.88, 5.29, 5.86, 6.14, 6.43, 6.83, 7.17 (Except RT44145 tandem) Ratios 2.64, 2.79, 2.93

With diff. lock Without diff. lock

A2-3235-W-1843 A8-3235-W-1843 Use 1 A2-3235-M-2171 5 as req. A3-3235-M-2171 6 A2-3235-L-21709 A3-3235-L-21706

A3-3235-J-21686 A2-3235-J-21685 With diff. lock Without diff. lock

Ratios 3.42, 3.55, 3.58, 3.70, 3.73, 3.90, 4.11 (All except RT44145 tandem) Ratios 3.42, 3.58, 3.73, 3.90, 4.11 (RT44145 tandem only) Ratios 4.30, 4.56, 4.63, 4.88, 5.29, 5.86, 6.14, 6.43, 6.83, 7.17 (All except RT44145 tandem) Ratios 4.30, 4.56, 4.63, 4.88, 5.29, 5.86, 6.14, 6.43, 6.83, 7.17 (RT44145 tandem only) Ratios 3.07, 3.21


Ratios 3.42, 3.58, 3.73, 3.90, 4.11 (All except RT44145 tandem) Ratios 3.42, 3.58, 3.73, 3.90, 4.11 (RT44145 tandem only) Ratios 4.30, 4.56, 4.63, 4.88, 5.29, 5.86, 6.14, 6.43, 6.83, 7.17 (All except RT44145 tandem)

PART NUMBER A-1228-L-1130 JM-716649 JM-716649 41-X-1327 1229-D-4632 A2-3235-V-1920 A8-3235-V-1920 A2-3235-S-1839 A8-3235-S-1839 A2-3235-U-1841 A8-3235-U-1841 KIT 2664 KIT 2665 KIT 2648 KIT 2647


Ratios 3.42, 3.58, 3.73, 3.90, 4.11 (All except RT44145 tandem) Ratios 4.30, 4.56, 4.63, 4.88, 5.29, 5.86, 6.14, 6.43, 6.83, 7.17 (All except RT44145 tandem) Ratios 2.64, 2.79, 2.93

QTY 1 2 1 16 16 Use 1 as req.

With diff. lock Without diff. lock With diff. lock Without diff. lock

Ratios 3.07, 3.21, 3.36

Ratios 3.07, 3.21

5 2.00"-39 spline 9 2.00"-39 spline. No longer available.

CARRIER All with diff. lock All without diff. lock All with diff. lock All All With diff. lock Without diff. lock With diff. lock Without diff. lock With diff. lock Without diff. lock

With diff. lock Without diff. lock With diff. lock Without diff. lock With diff. lock Without diff. lock

Use 1 A3-3235-V-1920 6 as req. A9-3235-V-1920 6 A10-3235-V-1920 5 A3-3235-S-1839 6 A10-3235-S-1839 5 A9-3235-S-1839 6 A3-3235-U-1841 6 A10-3235-U-1841 5 A9-3235-U-1841 6 A11-3235-D-2188 6 A10-3235-D-2188 6 A3-3235-W-1843 6 A10-3235-W-1843 5 A9-3235-W-1843 6 A11-3235-T-2152 6 A10-3235-T-2152 6 Use 1 A4-3235-M-2171 5 as req. A5-3235-M-2171 6 A5-3235-L-21706 A4-3235-L-21705

A5-3235-J-21686 A4-3235-J-21685 Use 1 A11-3235-V-1920 6 as req. A12-3235-V-1920 5 A12-3235-S-1839 5 A11-3235-S-1839 6 A11-3235-U-1841 6 A12-3235-U-1841 9

A4-3235-D-2188 6 A12-3235-W-1843 5 A11-3235-W-1843 6

6 2.10"-41 spline

7

FORWARD CARRIERS OF TANDEM AXLES ITEM 54, 52, 53, 63A (Cont)

DESCRIPTION Case & nest assy. with NoSPIN diff. - main diff.

55 55A

Bolt - gear to case Rivet - gear to diff. case

56 57

Washer - diff. bearing cap Capscrew - diff. bearing cap

58

Pin - adjusting ring lock

59 60

REMARKS Ratios 4.30, 4.56, 4.63, 4.88, 5.29, 5.86, 6.14, 6.43, 6.83, 7.17 (RT44145 tandem only) Included in KIT 2317 For service, rivets can be replaced with KIT 2317

L.H. L.H. and R.H. R.H. Thrust washer - side gear (Items 59-63 are not used in NoSPIN models. See Item 63A) Side gear – differential (Items 59-63 are not used Included in KIT 2310 in NoSPIN models. See Item 63A) Included in KIT 2389 Included in KIT 2696

61 62

63 63A

64 65

Spider - differential (cross) (Items 59-63 are not used in NoSPIN models. See Item 63A) Included in KIT 2696 Gear - differential pinion (Items 59-63 are not used in NoSPIN models. See Item 63A)

Thrust washer - diff. pinion (Items 59-63 are not used in NoSPIN models. See Item 63A) NoSPIN diff. nest

Washer - gear to diff. case Nut - gear to diff. case

CARRIER

All All except aluminum Aluminum only All with diff. lock All without diff. lock All with diff. lock All after 11/93 All prior to 11/93 All 40,000 lb. tandems after 11/93 All 34,000 lb. tandems after 11/93 RT44145 tandems after 11/93 All 40,000 lb. tandems prior to 11/93 All 34,000 lb. tandems prior to 11/93 RT44145 tandems prior to 12/92 RT44145 tandems from 1/93 to 11/93 All exc 44,000 lb. tandems 44,000 lb. tandems only All axles except RT44145 tandems produced after 1/93 RT44145 tandems produced after 1/93

Serviced as assembly only. Replaces items 59-63.


Note: Note: The following parts are used only on for ward carriers with main differential lock. 66 Sensor/switch - main diff. lock Included in KIT 4455 66A Clip - sensor/switch 66B Plug - DCDL switchport (non shown) Non-DCDL applications only 67 Lock nut - sensor/switch 68 Spring - main diff. lock 69 70

Roll pin - spring retaining Shift shaft - main diff. lock

71

Piston - main diff. lock

72

O-ring piston

73 73A 73B 74 75

Tube - air cylinder Air cylinder assembly - screw-in Plug - screw-in DCDL cylinder hole (not shown) Gasket - air cylinder cover Capscrew - manual engaging

75A 76 77

O-ring - manual engaging capscrew Cover - air cylinder Plug - air cylinder cover

5 2.00"-39 spline

8

Not Threaded for fork Threaded for fork

All 34,000 lb. capacity tandems All 40,000 & 44,000 lb. capacity tandems All All

All prior to 11/93 All after 11/93 All prior to 11/93 All after 11/93 All prior to 11/93 All after 11/93 All prior to 11/93 All after 11/93 All prior to 11/93 All prior to 11/93 All after 11/93

QTY PART NUMBER Use 1 A4-3235-T-2152 6 as req. 12 12

41-X-1216 RV-71016

4 4

42-X-1021 MS-220120-1 41-X-1365 1246-P-1134 1199-R-2176 1199-R-2176 1229-V-4624 1229-X-4522 2234-U-12696

1 2 1 2 2

2234-V-12705 2234-X-12726 KIT 27596 KIT 27585 KIT 26966 KIT 27606 1 4

2233-X-1116 4

1229-R-1032

1

A-3230-U-1035 5 A-3230-T-1034 6

12 12

1229-U-1503 40-X-1182

1 1

3237-W-1167 2257-M-1235 41-X-1022 1227-P-1056 2258-N-1262 2258-L-714 43-X-1006 KIT 2824 2244-L-1026 2230-T-1190 2230-N-170 5-X-1198 5-X-1153 3196-F-32 3261-A-1067 1250-U-1217 2208-H-944 41-X-1333 41-X-1368 5-X-521 3266-F-1020 MS-210016-1

1 1 1 1 1 1 1 1

Non-DCDL applications only All prior to 11/93 All after 11/93 Prior to 11/93 Prior to 11/93

6 2.10"-41 spline

3278-S-305 3278-Y-1117F 2233-J-1024

1 1 1 1 1

FORWARD CARRIERS OF TANDEM AXLES ITEM 78 79 80 81 82 83

DESCRIPTION Gasket - plug Capscrew - air cylinder cover Washer - air cylinder cover Clutch collar Shift fork Pin - shift fork

REMARKS

Not threaded Threaded Old 3 piece design

Note: The The following parts are used only on f orward carriers with oil pump. 84 Shield - filter 85 Plug - oil pressure relief valve No longer required as of 5/97 86 Washer - plug 87 Spring - oil pressure relief valve 88 Pressure relief valve - oil 89 Input cage to oil pump dowels No longer used 90 O-ring, oil pump 91 Oil pump assembly Serviced as assembly only

92 93 94 95 96

CARRIER Prior to 11/93

All after 11/93 All prior to 11/93

Pump driven off flats on input shaft Pump driven off splines on input shaft

Washer - oil pump Capscrew - oil pump Oil filter Adapter - oil filter Screen and plumb assy. - oil filter

Note: The following parts are used only on forward carriers with internally mounted anti-lock brake system sensors. 200 Wave washer 201 Snap ring 202 Snap ring 203 Sensor assembly 204 Sensor drive tube 39 Spline Use KIT 2511 41 Spline Use KIT 2512 205 Washer tube spacing 206 Snap ring tube retaining

2 Must change input yoke to 2.35"-46 spline. 10 Replaced old old three piece design design (3296-N-1080) (3296-N-1080)

QTY 1 4 4 1 1 2

PART NUMBER 2208-L-1000 41-X-1364 MWA-506 3107-D-1018 3296-Z-1170 3296-W-116710 43-X-1007

1 1 1 1 1 2 1 1

3280-Z-8398 1250-N-108011 1229-F-4062 2258-Z-1118 2297-U-5273 1246-M-1131 5-X-1034 KIT 28352 A-3303-P-1030

6 6 1 1 1

1229-E-1669 MS-208045-1 3280-V-8394 2297-Z-5278 A-2297-D-5334

2 2 2 2 2

2258-U-1243 1229-U-4519 1229-B-4422 SA1-3280-U-8861 3216-S-4361 3216-Q-4359 42-X-1248 1229-H-4428

2 2

11 Pressure relief plug plug eliminated. The relief relief valve and spring spring are now sandwiched between the pump and input cage before the pump is assembled to the cage. 9

CHART CHART 2 CARRI CARRIER ERS S FOR SI SINGLE AXLES AXLES AND REARS REARS OF OF TAND TANDEM AXLES AXLES (Use (Use with Figure Figure 2, 2, Inside Inside Front Cover) over) VISUAL IDENTIFICAT IDENTIFICATIIONOF REAR REAR CARRI CARRIERS ERS NO BU L GE

BU L GE

REAR CARRIERS WITHOUT DIFF. LOCK 3200-Q-1785 3200-C-1849 3200-E-1851 3200-S-1865 3200-A-1873 3200-Z-1924

BEARING CAGE RIBS ON SOME MOD EL S

REAR CARRIER WITHOUT DIFF. LOCK 3200-M-1547

R IBS

D IFF. LOC K

REAR CARRIER WITH DIFF. LOCK 3200-M-1547

BU L GE

R IBS

BEARING CAGE RIBS ON SOME MODELS

D IFF. L OC K REAR CARRIERS WITH DIFF. LOCK 3200-X-1558 3200-C-1849 3200-E-1851 3200-S-1865 3200-A-1873

NO DIFF. LOCK REAR CARRIER WITHOUT DIFF. LOCK 3200-L-1676 3200-M-1885

REAR CARRIER WITHOUT DIFF. LOCK 3200-R-1500

THE FOLLOWING FOLLOWING CARR IERS ARE EQUIPPED WITH A THRUST SCREW: 3200-Z-1872, 3200-A-1873, 3200-F-1904, 3200-Z-1924 THE FOLLOWING CARRIERS ARE MACHINED FOR INTERNAL ABS SENSORS: 3200-D-1850, 3200E-1851, 3200-Z-1924 3200-W-2051 CARRIER (not pictured) IS EQUIPPED WITH A THRUST SCREW, HAS INTEGRAL PINION BEARIN G CAGE AND IS NOT AVAILABLE WITH WITH DIFF D IFF.. LOCK.

10

CARRIERS FOR FOR SINGLE AXLES AXL ES AND REARS OF TANDEM AXLES ITEM 97

DESCRIPTION Nut - drive pinion

REMARKS Included in KIT 2637 Included in KIT 2636 Included in KIT 2637 Included in KIT 2636

97A

Washer - drive pinion nut

100

Oil seal - pinion bearing cage

101

Cone - drive pinion outer bearing

Amboid series

102

Cup - drive pinion outer bearing

Amboid series

103

Capscrew - input bearing cage

104 Washer - input bearing cage 105, 102, 108 Pinion bearing cage and cup assy.

106

107

Shim - pinion bearing cage

Spacer - pinion bearing

.076mm/.003 inch .127mm/.005 inch .254mm/.010 inch .075mm/.003 inch .125mm/.005 inch .250mm/.010 inch .500mm/.020 inch .075mm/.003 inch .125mm/.005 inch .250mm/.010 inch .500mm/.020 inch 9.40mm/.370 inch 9.43mm/.371 inch 9.45mm/.372 inch 9.48mm/.373 inch 9.50mm/.374 inch 9.60mm/.378 inch 9.70mm/.382 inch 9.80mm/.386 inch 9.90mm/.390 inch 10.00mm/.394 inch 10.10mm/.398 inch 10.20mm/.402 inch 10.23mm/.403 inch 10.25mm/.404 inch 10.28mm/.405 inch 10.30mm/.406 inch 8.75mm/.345 inch 8.78mm/.346 inch 8.80mm/.347 inch 8.83mm/.348 inch 8.85mm/.349 inch 8.98mm/.345 inch 9.10mm/.358 inch 9.13mm/.359 inch 9.15mm/.360 inch 9.18mm/.361 inch 9.20mm/.362 inch

3200-Q-1785, 3200-C-1849, 3200-E-1851, 3200-S-1865, 3200-A-1873, 3200-Z-1924 3200-R-1500, 3200-X-1558, 3200-L-1676, 3200-M-1885, 3200-Z-1872, 3200-G-1879, 3200-F-1904 Included in KIT 1647 / Shim O.D. 5.19 inches Included in KIT 2313 / Shim O.D. 9.62 inches

Included in KIT 1568 / Shim O.D. 8.50 inches

CARRIER QTY All except RS17140 1 RS17140 only All except RS17140 1 RS17140 only All except RS17140 1 RS17140 only 3200-W-20511 All except RS17140 and 3200-W-2051 RS17140 only 3200-W-20511 All except RS17140 and 3200-W-2051 RS17140 All except aluminum 8 Aluminum only All 8 RR17144, RR19144, 1 RR17145, RR19145, RR20140, RR20145, RR22145

RS17140 3200-W-2051

Use with carriers that use A-3226-M-1053 & A-3226-P-1056 pinion bearing cage Use with carriers that use A-3226-N-1236 pinion bearing cage


3200-W-2051


All except RS17140 and 3200-W-2051

2 Order KIT 2636 to purchase nut nut and washer. 9 For carriers with Telma Retarders Retarders or parking parking brakes call specifications for different cage, (888) 725-9355.

PART NUMBER 40-X-12373 40-X-12362 1229-T-1736 1229-A-2653 A1-1205-Z-2730 A-1205-D-1928 72225C 55206C M804049 72487 55437 M804010 MS-212045-1 41-X-1043 1229-C-1511 A-3226-N-1236

A-3226-M-1053 9

A-3226-P-1056 Use as 2203-F-2788 req. 2203-G-2789 2203-H-2790 2803-Q-2851 2803-R-2852 2803-S-2853 2803-T-2854 2203-C-8115 2203-D-8116 2203-E-8117 2203-B-9804 Use 2 1244-M-2431 as req. 1244-N-2432 1244-P-2434 1244-Q-2435 1244-R-2436 1244-S-2437 1244-T-2438 1244-U-2439 1244-V-2440 1244-W-2441 1244-X-2442 1244-Y-2443 1244-Z-2444 1244-A-2445 1244-B-2446 1244-C-2447 2203-J-9474 2203-K-9475 2203-L-9476 2203-M-9477 2203-N-9478 2203-P-9480 2203-Q-9481 2203-R-9482 2203-S-9483 2203-T-9484 2203-U-9485

3 Order KIT 2637 to purchase nut nut and washer.

11

CARRIERS FOR SINGLE AXLES AND REARS OF TANDEM AXLES ITEM 107 (Cont)

DESCRIPTION Spacer - pinion bearing

107A 108

Spacer - pinion bearing Cup - drive pinion inner bearing

Amboid series

109

Cone - drive pinion inner bearing

Amboid series

110, 97, 97A Drive gear, pinion and nut assy

3.42 Ratio 3.58 Ratio 3.73 Ratio 3.91 Ratio 4.10 Ratio 4.30 Ratio 4.33 Ratio 4.56 Ratio 4.88 Ratio 5.13 Ratio 5.29 Ratio 5.57 Ratio 5.86 Ratio 6.14 Ratio 6.43 Ratio 6.83 Ratio 7.17 Ratio 2.64 Ratio 2.79 Ratio 2.93 Ratio 3.07 Ratio 3.21 Ratio 2.64 Ratio 2.79 Ratio 3.08 Ratio 3.36 Ratio 3.55 Ratio 3.70 Ratio 3.90 Ratio 4.11 Ratio 3.42 Ratio 3.58 Ratio 3.73 Ratio 3.90 Ratio 3.91 Ratio 4.10 Ratio 4.11 Ratio 4.33 Ratio 4.63 Ratio 4.88 Ratio

1 Not available in the aluminum carrier. 12 Coach quality gearing 14 Replaces B-41504-1 (4.10 ratio) 16 No longer available.

12

REMARKS Included in KIT 2321

8.35mm/.329 inch 8.38mm/.330 inch 8.40mm/.331 inch 8.43mm/.332 inch 8.45mm/.333 inch 8.58mm/.338 inch 8.70mm/.343 inch 8.73mm/.344 inch 8.75mm/.345 inch 8.78mm/.346 inch 8.80mm/.347 inch

Input spline size 2.00" dia. - 39 splines. Original small pitch dia. ring gear. New style will not fit in this carrier.

Input spline size 2.00" dia. - 39 splines. New larger pitch diameter gearing.

Input spline size 2.00" dia. - 39 splines. Amboid series axles.

Input spline size 2.00" dia. - 39 splines. New larger pitch diameter gearing. For 4.56 ratio use B-41542-1

CARRIER RS17140 only

QTY PART NUMBER Use 2 2203-V-9486 as req. 2203-W-9487 2203-X-9488 2203-Y-9489 2203-Z-9490 2203-A-9491 2203-B-9492 2203-C-9493 2203-D-9494 2203-E-9495 2203-F-9496 3200-W-2051 only 1 1244-F-2346 3200-W-20511 H715311 All except RS17140 and 72487 3200-W-2051 RS17140 only 55437 3200-W-20511 H715334 All except RS17140 and 72212C 3200-W-2051 RS17140 only 55200C 3200-Q-1785 Use 1 B-41530-1 as req. B-41532-1 B-41534-1 B-41536-1 B-41538-1 Use 4.33 Ratio B-41540-1 B-41542-1 B-41544-1 B-41546-1 B-41548-1 B-41550-1 B-41552-1 B-41554-1 B-41556-1 B-41558-1 B-41560-118 3200-R-1500, 3200-X-1558, B-41716-11 3200-L-1676, 3200-M-1885, A-41682-111 3200-Z-1872, 3200-G-1879, A-41158-1 3200-F-1904 A-41494-1 A-41496-1 3200-W-2051 B-42120-1 A-42172-1 A-42200-1 A-42202-1 A-42204-1 B-42206-1 B-42180-116 A-42128-1 All except RS16140, B-41164-1 RS17140, 3200-Q-1785 and B-41498-1 3200-W-2051 carriers. A-41842-112 B-41500-1 B-41684-113 A-41830-112 A-41802-112 B-41686-114 B-41266-1 A-41654-115 B-41268-1 A-41672-112 B-41270-1 A-41714-112

11 Replaces A-39910-1 (2.80 ratio) 13 Replaces B-41502-1 (3.91 ratio) 15 Coach quality gearing. gearing. 4.33 coach quality uses diff. case case for 3.42 - 4.11. 18 For replacement information, contact Information Services at 888-725-9355.

CARRIERS FOR FOR SINGLE AXLES AXL ES AND REARS OF TANDEM AXLES ITEM DESCRIPTION 110, 97, 97A Drive gear, pinion and (Cont) nut assy

CARRIER QTY PART NUMBER All except RS16140, Use 1 A-41652-1 12 RS17140, 3200-Q-1785 and as req. A-41272-1 3200-W-2051 carriers. 5.29 Ratio A-42272-1 12 B-41274-1 5.57 Ratio A-41304-1 A-42086-1 12 5.86 Ratio A-42464-1 12 B-41456-1 6.14 Ratio A-41458-1 6.43 Ratio A-41460-1 6.83 Ratio A-41462-1 7.17 Ratio B-43426-1 3.42 Ratio Input spline size 1.75" dia. - 34 RS16140, RS17140 A-41164-3 splines. 3.58 Ratio A-41498-3 16 3.73 Ratio A-41500-3 3.90 Ratio A-41684-3 17 4.11 Ratio A-41686-3 16 4.33 Ratio A-41266-3 4.56 Ratio B-41542-3 4.88 Ratio A-41270-3 5.13 Ratio A-41272-3 16 5.29 Ratio A-41274-3 16 5.57 Ratio A-41304-3 5.86 Ratio A-41456-3 6.43 Ratio A-41460-3 6.83 Ratio A-41462-3 16 7.17 Ratio A-41464-3 16 111 Bearing - drive pinion spigot All 1 1228-F-552 112 Snap ring - drive pinion bearing All 1 1229-A-1301 113, 114, 115 Diff. carrier and cap assy. Original design 3200-R-1500 1 A2-3200-R-1500 Without main diff. lock 3200-M-1547 KIT 272918 (3.91 and 4.10 Ratios) All other ratios KIT 2730 1676 (all ratios) A2-3200-L-1676 1785, 1865 A2-3200-S-1865 (3.42 - 7.17 ratios) With screw-in main diff. lock 3200-G-1879 A2-3200-G-1879 With screw-in main diff. lock and 1904 (all ratios) A2-3200-F-1904 thrust screw Without main diff. lock, with 1873 (3.42 - 7.17 ratios) A2-3200-A-1873 thrust screw Without main diff. lock, with 1850 (3.07 & 3.21 ratios) A2-3200-D-1850 internal ABS sensor 1851 (3.42 - 7.17 ratios) A2-3200-E-1851 Without main diff. lock, aluminum 3200-M-1885 (aluminum A2-3200-M-1885 carrier version of 1676 carrier) 3200-C-1849 (aluminum A2-3200-C-1849 version of 1865 carrier) Without main diff. lock, with 3200-Z-1924 A2-3200-Z-1924 thrust screw with internal ABS sensor Amboid series drive axles 3200-W-2051 A2-3200-W-2051 113A Thrust screw Included in KIT 4766 3200-W-2051 1 10-X-1710 All except 3200-W-2051 41-X-1371 113B Jam nut – thrust screw 1 40-X-1016 113C Thrust block Included in KIT 4766 3200-W-2051 only 1 2297-P-8336 114 Washer - differential bearing cap All 4 42-X-1021 115 Capscrew - differential bearing cap All except aluminum 4 MS-220120-1 Aluminum only 41-X-1365 116 Adjusting ring L.H. - small 1547, 1558, 1879, 1904 1 2214-C-1095 R.H. - small 2214-Y-1039 L.H. and R.H. 3200-R-1500 2 2214-L-272 All except 1500, 1547, 1558 2214-C-1095 3200-E-1851 2214-U-1139 117 Adjusting ring lock L.H. and R.H. Diff. lock 1547, 1676, 1785, 1865 1 KIT 4284 L.H. and R.H. Non diff lock 1558, 1879, 1904 KIT 4284 L.H. only R.H. see 132, 133 and 134 3200-R-1500 1199-R-2176 5.13 Ratio

12 Coach quality gearing 17 Replaces A-41502-3 (3.91 ratio)

REMARKS Input spline size 2.00" dia. - 39 splines. New larger pitch diameter gearing. For 4.56 ratio use B-41542-1

16 No longer available. 18 For replacement replacement information, contact Information Services at 888-725-9355. 13

CARRIERS FOR SINGLE AXLES AND REARS OF TANDEM AXLES ITEM

118

118A 119

120 121 122 122A

DESCRIPTION DESCRIPTION

Cup - diff. ring

REMARKS

L.H. only R.H. only L.H. and R.H.

123, 129, 130 Case assy - main main diff.

Ratios 2.64, 2.79, 2.93 Ratios 3.07, 3.08, 3.21, 3.36

Ratios 3.42, 3.58, 3.73, 3.90, 3.91, 4.10, 4.11 (44,000 lb tandem axles only) Ratios 4.30, 4.33, 4.56, 4.63, 4.88, 5.13, 5.29, 5.57, 5.86, 6.14, 6.43, 6.83, 7.17 (Except 44,000 lb. tandem axles) Note: 4.33 ratio for coach quality gearing use diff. case for ratios 3.42-4.11

123, 129, 130, Case assy. - main diff. 204, 205, 206

Ratios 4.30, 4.33, 4.56, 4.63, 4.88, 5.13, 5.29, 5.57, 5.86, 6.14, 6.43, 6.83, 7.17 (44,000 lb. tandem axles only) Ratios 2.64, 2.79, 2.93

1 1 2


For service, rivets can be replaced with KIT 2317 With diff. lock Without diff. lock With diff. lock


With diff. lock Without diff. lock With diff. lock Without diff. lock

With diff. lock

1676, 1785, 1865, 1873, 2051 3200-R-1500 All

1558, 1879 1676, 1885, 2051 1558, 1879 A12-3200-R-1500 1676, 1885, 2051 3200-M-1547 except 1.85"-36 spline 1558, 1849, 1879, 1904 A12-3200-R-1500 3200-M-1547 except 1.85"-36 spline RS16140, RS17140, 3200-M-1547 (1.85"-36 spline) 3200-R-1500 1676, 1785, 1865, 1885, 2051 1872 and 1904 All others 1873 All others 1558, 1849, 1879, 1904 A12-3235-R-1500 3200-M-1547 except 1.85"-36 splines RS16140, RS17140, 3200-M-1547 (1.85"-36 spline) 3200-R-1500 1676, 1785, 1865, 1885 1872, 1904

2

12 12 12 All

2297-T-4180 JM-716649 A-1228-L-1130 JM-716649 A1-1228-H-60610 40-X-1182 1229-U-1503 41-X-1216 RV-7101612

Use 1 A2-3235-V-1920 as req. A8-3235-V-1920 A2-3235-S-1839 A2-3235-Y-174116 A8-3235-S-1839 A-3235-S-1839 A2-3235-U-1841 A6-3235-C-1719 A-3235-U-1841 A-3235-N-1938

A13-3235-C-17196 A8-3235-U-1841 A2-3235-D-2188 KIT 2664 A-3235-D-2188 KIT 2665 A2-3235-W-1843 A8-3235-E-1721 A-3235-W-1843 A-3235-Q-1941

A15-3235-E-17216 A8-3235-W-1843 KIT 2648

3200-A-1873

KIT 2647

Without diff. lock

With ABS tubes

Use 1 A2-3235-N-21729 as req. A3-3235-N-21726 A2-3235-M-21715 A3-3235-M-21716 A1-3235-Y-22616

Ratios 3.42, 3.58, 3.73, 3.90, 3.91, 4.10, 4.11 (44,000 lb tandem axles only) Ratios 3.42, 3.58, 3.73, 3.90, 3.91, 4.10, 4.11 (except 44,000 lb) Note: 4.33 ratio for coach quality gearing also uses this std. diff. case

14

1228-L-1130 JM-716610

Without diff. lock

Ratios 3.07 and 3.21

5 2.00”-39 spline 9 2.00”-39 spline. No longer available. available. 10 Sold as a cup and cone set only. only.

PART NUMBER JM-716610

A1-1228-H-60610

1 1

1547, 1558, 1879, 1904

Without diff. lock

Ratios 3.42, 3.55, 3.58, 3.70, 3.73, 3.90, 3.91, 4.10, 4.11 (Except 44,000 lb tandem axles) Note: 4.33 ratio for coach quality gearing also uses this std. diff. case.

QTY

1676, 1785, 1865, 1873, 2051 3200-R-1500

Adhesive - diff. bearing cup Cone - diff. bearing L.H. only R.H. only L.H. and R.H.

Nut - gear to differential case Washer - gear to differential case Bolt - differential case to gear Rivet - gear to differential

CARRIER

1547, 1558, 1879, 1904

A3-3235-L-21706

A2-3235-L-21709

6 2.10"-41 spline 16 No longer available.

CARRIERS FOR FOR SINGLE AXLES AXL ES AND REARS OF TANDEM AXLES ITEM DESCRIPTION 123, 129, 130, Case assy. - main diff. 204, 205, 206 (Cont)

123 thru 130 Case & nest assy main diff.

REMARKS Ratios 4.30, 4.33, 4.56, Without diff. lock 4.63, 4.88, 5.13, 5.29, 5.57, 5.86, 6.14, 6.43, 6.83, 7.17 (44,000 lb. tandem axles only) Ratios 4.30, 4.33, 4.56, 4.63, 4.88, 5.13, 5.29, 5.57, 5.86, 6.14, 6.43, 6.83, 7.17 (Except 44,000 lb. tandem axles) Ratios 2.64, 2.79, 2.93 With diff. lock Ratios 3.07, 3.08, 3.21 and 3.36 Ratios 3.42, 3.55, 3.58, 3.70, 3.73, 3.90, 3.91, 4.10, 4.11 (Except 44,000 lb tandem axles) Note: 4.33 ratio for coach quality gearing also uses this std. diff. case. Ratios 4.30, 4.33, 4.56, 4.63, 4.88, 5.13, 5.29, 5.57, 5.86, 6.14, 6.43, 6.83, 7.17 (Except 44,000 lb. tandem axles) Ratios 2.64, 2.79, 2.93 Without diff. lock Ratios 3.07, 3.08, 3.21, 3.36 Ratios 3.42, 3.55, 3.58, 3.70, 3.73, 3.90, 3.91, 4.10, 4.11 (Except 44,000 lb tandem axles) Note: 4.33 ratio for coach quality gearing also uses this std. diff. case. Ratios 4.30, 4.33, 4.56, 4.63, 4.88, 5.13, 5.29, 5.57, 5.86, 6.14, 6.43, 6.83, 7.17 (Except 44,000 lb. tandem axles) Ratios 3.42, 3.58, 3.73, 3.90, 3.91, 4.10, 4.11 (44,000 lb. tandem axles only Ratios 4.30, 4.33, 4.56, 4.63, 4.88, 5.13, 5.29, 5.57, 5.86, 6.14, 6.43, 6.83, 7.17 (44,000 lb. tandem axles only) Ratios 3.42, 3.58, 3.73, 3.90, 3.91, 4.10, 4.11 (44,000 lb. tandem axles only Ratios 4.30, 4.33, 4.56, 4.63, 4.88, 5.13, 5.29, 5.57, 5.86, 6.14, 6.43, 6.83, 7.17 (44,000 lb. tandem axles only) Ratios 3.07, 3.08, 3.21, 3.36

5 2.00"-39 spline

CARRIER With ABS tubes

QTY PART NUMBER Use 1 A1-3235-K-2169 6 as req.

A2-3235-J-21685 A3-3235-J-21686

1558 and 1879

Use 1 A3-3235-V-1920 6 as req. A3-3235-S-1839 6

A3-3235-U-1841 6

A3-3235-W-1843 6

1676, 1885 1676, 1885, 2051 1676, 1885 1676, 1885, 2051 1676, 1785, 1865 and 1885

A10-3235-V-1920 5 A9-3235-V-1920 6 A10-3235-S-1839 5 A9-3235-S-1839 6 A10-3235-U-1841 5

1676, 1785, 1865, 1885, 2051

A9-3235-U-1841 6

1676, 1785, 1865, 3200-M-1885

A9-3235-W-1843 6 A10-3235-W-1843 5

With diff. lock

1872 and 1904

A11-3235-D-2188 6

A11-3235-T-2152 6

Without diff. lock

3200-A-1873

A10-3235-D-2188 6

Without diff.lock

3200-L-1676, 3200-A-1873

A10-3235-T-2152 6

Without diff. lock

3200-M-1547 except 1.85"-36 spline

A1-3235-S-1839 6

6 2.10"-41 spline

15

CARRIERS FOR SINGLE AXLES AND REARS OF TANDEM AXLES ITEM

DESCRIPTION

123 thru 130 Case & nest assy main (Cont) diff.

123, 129, 130, Case & nest assy. main 131 diff.

REMARKS

Ratios 3.42, 3.55, 3.58, 3.70, 3.73, 3.90, 3.91, 4.10, 4.11 (Except 44,000 lb tandem axles) Note: 4.33 ratio for coach quality gearing also uses this std. diff. case. Ratios 4.30, 4.33, 4.56, 4.63, 4.88, 5.13, 5.29, 5.57, 5.86, 6.14, 6.43, 6.83, 7.17 (Except 44,000 lb. tandem axles) Ratios 2.64, 2.79, 2.93 Ratios 3.42, 3.55, 3.58, 3.70, 3.73, 3.90, 3.91, 4.10, 4.11 (Except 44,000 lb tandem axles) Note: 4.33 ratio for coach quality gearing also uses this std. diff. case. Ratios 4.30, 4.33, 4.56, 4.63, 4.88, 5.13, 5.29, 5.57, 5.86, 6.14, 6.43, 6.83, 7.17 (Except 44,000 lb. tandem axles) Ratios 3.07, 3.08, 3.21, 3.36 Ratios 3.42, 3.55, 3.58, 3.70, 3.73, 3.90, 3.91, 4.10, 4.11 (Except 44,000 lb tandem axles) Note: 4.33 ratio for coach quality gearing also uses this std. diff. case. Ratios 4.30, 4.33, 4.56, 4.63, 4.88, 5.13, 5.29, 5.57, 5.86, 6.14, 6.43, 6.83, 7.17 (Except 44,000 lb. tandem axles) Ratios 3.42, 3.55, 3.58, 3.70, 3.73, 3.90, 3.91, 4.10, 4.11 (Except 44,000 lb tandem axles) Note: 4.33 ratio for coach quality gearing also uses this std. diff. case. Ratios 4.30, 4.33, 4.56, 4.63, 4.88, 5.13, 5.29, 5.57, 5.86, 6.14, 6.43, 6.83, 7.17 (Except 44,000 lb. tandem axles) Ratios 4.30, 4.33, 4.56, 4.63, 4.88, 5.13, 5.29, 5.57, 5.86, 6.14, 6.43, 6.83, 7.17 (except 44,000 lb. tandem axles) Ratios 3.42, 3.58, 3.73, 3.90, 3.91, 4.10, 4.11 (except 44,000 lb) Note: 4.33 ratio for coach quality gearing also uses this std. diff. case

5 2.00"-39 spline 9 2.00”-39 spline. No longer longer available. available. 16 No longer longer available 16

Without diff. lock

CARRIER

3200-M-1547 except 1.85"-36 spline

QTY

PART NUMBER

Use 1 A1-3235-U-18416 as req.

A1-3235-W-18436

3200-M-1885 3200-R-1500

A18-3235-V-19206 A12-3235-C-17197

A14-3235-E-17217

With diff. lock

A12-3200-R-1500

A3-3235-Y-174116 A4-3235-C-17196

A6-3235-E-17216

Without diff. lock

RS16140, RS17140, 3200-M-1547 (1.85"-36 spline)

A1-3235-N-1938

A1-3235-Q-1941

NoSPIN diff.

1676, 1785, 1865 and 1885

Use 1 A12-3235-W-18435 as req. A11-3235-W-18436

1676, 1785, 1865, 1885

6 2.10"-41 spline 7 2.10"-41 spline. spline. No No longer available.

A12-3235-U-18419

CARRIERS FOR FOR SINGLE AXLES AXL ES AND REARS OF TANDEM AXLES ITEM DESCRIPTION 123, 129, 130, Case & nest assy. main 131 (Cont) diff.

Ratios 3.42, 3.58, 3.73, 3.90, 3.91, 4.10, 4.11 (Except 44,000 lb) Note: 4.33 ratio for coach quality gearing also uses this std. diff. case Ratios 3.42, 3.58, 3.73, 3.90, 3.91, 4.10, 4.11 (44,000 lb. tandem axles only Ratios 2.64, 2.79, 2.93

REMARKS NoSPIN diff.

CARRIER 1676, 1785, 1865, 1885

QTY PART NUMBER Use 1 A11-3235-U-1841 6 as req.

3200-A-1873

A4-3235-D-2188 6

3200-L-1676

A12-3235-V-1920 5 A11-3235-V-1920 6 A12-3235-S-1839 5 A11-3235-S-1839 6 A4-3235-T-2152 6

Ratios 3.07 and 3.21 Ratios 4.30, 4.33, 4.56, 4.63, 4.88, 5.13, 5.29, 5.57, 5.86, 6.14, 6.43, 6.83, 7.17 (44,000 lb. tandem axles only) 123 thru 130, Case & nest assy - main Ratios 2.64, 2.79, 2.93 204, 205, 206 diff. Ratios 3.07 and 3.21

3200-L-1676 3200-A-1873

Without diff. lock

With ABS tubes

Ratios 3.42, 3.58, 3.73, 3.90, 3.91, 4.10, 4.11 (44,000 lb. tandem axles only) Ratios 3.42, 3.58, 3.73, 3.90, 3.91, 4.10, 4.11 (Except 44,000 lb. tandem axles) Note: 4.33 Ratio for coach quality gearing also uses this std. diff. case Ratios 4.30, 4.33, 4.56, 4.63, 4.88, 5.13, 5.29, 5.57, 5.86, 6.14, 6.43, 6.83, 7.17 (44,000 lb. tandem axles only) Ratios 4.30, 4.33, 4.56, 4.63, 4.88, 5.13, 5.29, 5.57, 5.86, 6.14, 6.43, 6.83, 7.17 (Except 44,000 lb. tandem axles) 124

125

Thrust washer - side gear

Side gear - differential

A4-3235-L-21705

A5-3235-L-21706

A2-3235-K-2169 6

A4-3235-J-21685 A5-3235-J-21686

Not used on NoSPIN

Included in KIT 2308 Included in KIT 2389



4 1.85 in.-36 spline 6 2.10"-41 spline

Use 1 A6-3235-N-2172 5 as req. A7-3235-N-2172 6 A4-3235-M-2171 5 A5-3235-M-2171 6 A2-3235-Y-2261 6

All after 11/93 except 1.85"-36 spline All prior to 11/93 except 1.85"-36 spline RS16140, RS17140, 3200-M-1547 (1.85"-36 spline) RS16140, RS17140, 3200-M-1547 RS16140, RS17140, RS17145 after 11/93 RS16140, RS17140, RS17145 prior to 11/93 RS21145 and RR20145 after 11/93 RS21145 and RR20145 prior to 11/93 RT44145 tandems after 11/93 RT44145 tandems from 1/93 to 11/93 RT44145 tandems prior to 1/93

2

1229-V-4624 1229-X-4522 1229-Z-3172

2

2234-T-10864 2234-V-12705 KIT 27585 2234-U-12696 KIT 27596 2234-X-12726 KIT 27606 KIT 26966

5 2.00"-39 spline

17

CARRIERS FOR SINGLE AXLES AND REARS OF TANDEM AXLES ITEM 126

127

DESCRIPTION Thrust washer - diff. pinion

REMARKS

Gear - differential pinion


Included in KIT 2696 128

Spider - differential (cross)


Included in KIT 2696 129 130 130A 131

131A 131B 131C

Washer - main diff. case halves Capscrew - main diff. case halves Thread locking liquid NoSPIN diff. nest assembly

Cover - special carrier - w/o diff. lock Washer - cover - w/o diff. lock Capscrew - cover - w/o diff. lock

Serviced as assy. only. Replaces Items 124-128

Without diff. lock

Note: Note: The following parts are used only on rear carriers with main differential lock. 132 Lock plate - adjusting ring R.H. 133 Washer - lock plate 134 Capscrew - lock plate 135 Clutch collar - main diff. lock 136

Shift fork

137 138

Pins - shift fork Spring - main diff. lock

139

Shift shaft - main diff. lock

140 141 142

Pin - spring retaining Tube - air cylinder Piston - air cylinder

143

O-Ring - piston

144 145

Gasket - air cylinder cover Capscrew - manual engaging

145A 146 146A 146B

O-ring - manual engaging capscrew Cover - air cylinder Shift cylinder assembly Plug - screw-in DCDL cylinder hole

5 2.00"-39 spline 10 Replaced old three piece design (3296-N-1080) (3296-N-1080) 18

Old 1 pc. design New 1 pc. design Original 3 pc. design Original design

Original design

CARRIER All except 1.85"-36 spline RS16140, RS17140, 3200-M-1547 (1.85"-36 spline) All except 1.85"-36 spline and RT44145 tandems produced after 1/93 RS16140, RS17140, 3200-M-1547 (1.85"-36 spline) RT44145 tandems produced after 1/93 All except 1.85"-36 spline and RT44145 tandems produced after 1/93 RS16140, RS17140, 3200-M-1547 (1.85"-36 spline) RT44145 tandems produced after 1/93 All All All 3200-M-1547 (1.85"-36 spline) RS16140, RS17140, RR17145, RR19145 (except 3200-M-1547 1.85"-36 spline) RS17144, RS19144, RS21145, RR17144, RR19144, RR20145, RR22145 3200-R-1500

3200-R-1500 3200-R-1500 3200-R-1500 1558, 1872, 1879, 1904 3200-R-1500 1558, 1872 1879, 1904 3200-R-1500 All 1500, 1558, 1872 1879, 1904 1558, 1872 1879, 1904 3200-R-1500 All All bolt-on designs Bolt-on shifter Screw-in shifter Bolt-on shifter Screw-in shifter 1558, 1872 1879, 1904 3200-R-1500 All bolt-on designs Screw-in design

Non-DCDL applications only

6 2.10"-41 spline 16 No longer available.

QTY 4

4

PART NUMBER 1229-R-1032 1229-L-1026

2233-J-1024

2233-M-1027

2233-X-1116 1

3278-S-305

3278-D-82

3278-Y-1117F 16 16 as req. 1

1229-D-4632 41-X-1327 2297-C-7049 A-3230-V-1036 A-3230-U-1035 5

A-3230-T-1034 6

1 4 1

3266-M-897 MWA-508 41-X-1080

1 2 2 1

1220-K-89 MWA-508 MS-208020-1 3107-D-1018 3107-R-100616 3296-W-116710 3296-Z-1170 3296-F-188 43-X-1007 2258-L-714 2258-N-1262 2244-L-1026 KIT 2824 2244-Z-52 43-X-1006 3196-F-32 2230-N-170 2230-T-1190 5-X-1153 5-X-1198 2208-H-944 41-X-1330 41-X-1368 41-X-1333 5-X-521 3266-F-1020 3261-A-1067 1250-U-1217

1

2 1 1

1 1 1 1 1 1

1 1 1

CARRIERS FOR FOR SINGLE AXLES AXL ES AND REARS OF TANDEM AXLES ITEM 147

DESCRIPTION Capscrew - air cylinder cover

148 149 150 151 151A 151B 152

Washer - air cylinder cover Gasket - plug Plug - air cylinder cover Sensor/switch - main diff. lock Clip - sensor/switch Plug - DCDL switchport Nut - sensor/switch

REMARKS

CARRIER 1558, 1872 3200-R-1500 All bolt-on designs

Included in KIT 4455 Non-DCDL applications only 1500, 1558, 1872

Note: The following parts are used only on rear rear carriers wi th int ernally mounted anti-lock brake system sensors. sensors. 200 Wave washer 201 Snap ring 202 Snap ring 203 Sensor assembly 204 Sensor - drive tube 39 spline Use KIT 2511 41 spline Use KIT 2512 205 Washer - tube spacing 206 Snap ring - tube retaining

QTY 4 4 1 1 1 1 1 1

2 2 2 2 2 2 2

PART NUMBER 41-X-1359 41-X-1364 MWA-506 2208-L-1000 MS-210016-1 3237-W-1167 2257-M-1235 41-X-1022 1227-P-1056

2258-U-1243 1229-U-4519 1229-B-4422 SA1-3280-U-8861 3216-S-4361 3216-Q-4359 42-X-1248 1229-H-4428

XpresswayPlus.com Don't forget about using XpresswayPlus.com for: 

Ordering parts online



Reference Library



Order status



The Company Store



Price and availability Visual search for new users



Easy to use navigating instructions Dealer/Distributor locator

 



Online e-mail or phone numbers for Customer Custom er Service, Information Services, Marketing, Catalog, and eSupport

XpresswayPlus is easy to use, can reduce phone calls, and save you valuable time.

19

OUTPUT (THRU) SHAFT ASSEMBLY PARTS

ITEM 153 154 155 156

DESCRIPTION Output (thru) shaft, bearing cage and seal assembly Shaft - output (thru) Silastic gasket Bearing cage and inner cup assembly - output

REMARKS (Includes Items 154, 156, 159, 160, 161, 162, 163, 164, 165)

3 oz. tube Must change yoke to 2"-39 spline

156A 157 158 159

Deflector (no longer used) Washer - output bearing cage Capscrew - output bearing cage Cup - inner and outer output bearing

160

Cone - inner and outer output bearing

161

Snap ring spacer - output bearing (variable thickness) (Spacer kits are available to service these assemblies) KIT 530 is used for the original design 140 tandem. KIT 576 is used for all other models in this catalog

3.94mm/.155 inch 4.01mm/.158 inch 4.09mm/.161 inch

4.24mm/.167 inch 4.32mm/.170 inch 4.39mm/.173 inch 4.47mm/.176 inch 4.55mm/.179 inch 4.62mm/1.82 inch Snap ring spacer - output bearing/yoke

163

Oil seal - output bearing cage

164

Washer - output yoke and shaft

165

Nut - output yoke and shaft

Included in KIT 2636 Included in KIT 2637 Included in KIT 2636 Included in KIT 2637

1 Use A1-1205-Y-2729 seal & sleeve. Do not not use deflector. deflector. 3 Order KIT 2637 to purchase nut nut and washer. 20

QTY All

All others Original design 140 tandem All All others Original design 140 tandem

All All

4.17mm/.164 inch

162

AXLE MODEL

All others Original design 140 tandem All others Original design 140 tandem All others Original design 140 tandem All others Original design 140 tandem All others Original design 140 tandem All others Original design 140 tandem All others Original design 140 tandem All others Original design 140 tandem All others Original design 140 tandem All others Original design 140 tandem All others Original design 140 tandem All others Original design 140 tandem All others Original design 140 tandem Original design 140 tandem All others Original design 140 tandem All others Original design 140 tandem All others

2 Order KIT 2636 to purchase nut and washer. washer.

1 1 1 1 4 4 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

PART NUMBER 1 A1-3226-T-1112S 1 3297-E-1019 3297-N-1158 2297-A-7021 1 A-3226-T-1112 A1-3226-T-1112S

KIT 25831 1229-K-1597 15-X-387 2 JLM-104910 LM-603011 2 LM-104949 LM-603049 1 1229-P-2590 1229-A-2237 1 1229-Q-2591 1229-B-2238 1 1229-R-2592 1229-C-2239 1 1229-S-2593 1229-D-2240 1 1229-T-2594 1229-E-2241 1 1229-U-2595 1229-F-2242 1 1229-V-2596 1229-G-2243 1 1229-W-2597 1229-H-2244 1 1229-X-2598 1229-J-2246 1 1229-Y-2599 1229-K-2247 1 1229-W-4131 1829-A-859 A-1205-G-2425 1 A1-1205-Y-2729 1229-A-2653 1229-T-1736 40-X-12362 40-X-12373

HOUSING HOUSING ASSEMBLY PARTS

ITEM

DESCRIPTION

167 168 169 170

Breather assembly Stud - housing to carrier. Plug - heat indicator Plug - magnetic oil drain and fill

171 172 173 174

Plug - non-magnetic oil fill Washer - carrier to housing Silastic gasket - housing to carrier Capscrew - carrier to housing

REMARKS

For aluminum or iron carriers Female socket Male socket


AXLE MODEL

QTY

All All forward carriers All All

1 2 1 1 1 1 12 1 3 7 8 4 9 4 2 2

All All All All forward carriers All other single and rear carriers RR22145, RR21145

175 176 177

178

Nut - carrier to housing stud Capscrew - brake line bracket Gasket - brake line bracket

Washer - brake line bracket

179

Oil seal - wheel end

180

Cone - wheel bearing (inner)

181

Cup - wheel bearing (inner)

182

Cup - wheel bearing (outer)

183

Cone - wheel bearing (outer)

184

Nut - wheel bearing (inner)

185, 185A Lock washer and tanged lock washer 186

Nut - wheel bearing (outer)

Must purchase kit which includes both items

All forward carriers All All others RS16140, RS17140, RS19145, RS21145 All others RS16140, RS17140, RS19145, RS21145 "L" wheel end "R" wheel end "L" wheel end "R" wheel end "L" wheel end "R" wheel end "L" wheel end "R" wheel end "L" wheel end "R" wheel end "L" wheel end "R" wheel end "L" wheel end "R" wheel end "L" wheel end "R" wheel end

PART NUMBER A-1199-W-4053 4-X-1921 P-28-S 1250-E-473 1250-L-1286 P-212 1229-W-1557 2297-A-7021 10-X-1597 10-X-1594 10-X-1594 S-21020A-2 10-X-1594 S-21016-2 N-110-1 S-258-2 2 2208-P-536

4

2208-P-536

4

2 1229-E-1669 1229-E-1669

2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

A-1205-W-1349 A-1205-Q-2487 47686 594A 47620 592A 39520 572 39590 580 1227-Z-1040 1227-W-517 KIT 2761 1229-F-4634S 1227-E-1045 1227-R-330

21

AXLE SHAFT SETS FOR 140, 141, 143, 144 & 145 SERIES AXLES LEFT HAND

RIGHT HAND

Axle RS-16-140 Singl e Axle 3 2 02 -G-96 0 1 32 0 2-J-96 0 4 RS-16-141 Si n gl e Axl e 3 2 02 -X-9 0 46 32 0 2-Y-90 4 7 3 2 0 2 - C -9 5 9 7 32 0 2-E-9 5 9 9 RS-17-140 Si n gl e 3 2 02 -X-9 0 46 3 2 0 2 - B- 9 0 5 0 3202-Y-9281 (15)

Axl e 32 0 2-Y-9 0 47 3 2 0 2 - C -9 0 5 1 3202-Z-9282 (15) (19)

Axle RS-17-144 Singl e Axle 3 2 02 -Q-91 1 7 3 2 0 2 - R -9 1 1 8 3 2 02 -F-9 3 40 32 0 2-G-9 3 41 3 2 0 2 - S- 9 0 4 1 32 0 2-T-90 4 2 3 2 0 2 - S- 9 4 8 3 32 0 2-T-94 8 4 3 2 0 2 - H -9 6 2 8 3 2 0 2 - S- 9 0 4 1 3 2 02 -Q-91 1 7 3 2 02 -F-9 3 40 3 2 0 2 - S- 9 4 8 3 3 2 02 -Q-98 4 5

32 0 2-K-9 6 3 1 3 2 0 2 - U -9 0 4 3 32 0 2-S-9 1 1 9 3 2 0 2 - H -9 3 4 2 3 2 0 2 - U -9 4 8 5 32 0 2-S-9 8 4 7

3 2 0 2 - S- 9 4 8 3 3 2 0 2 - H -9 6 2 8 3 2 0 2 - S- 9 0 4 1 3 2 02 -Q-91 1 7 3 2 02 -F-9 3 40 3 2 0 2 - S- 9 4 8 3 3 2 02 -Q-98 4 5

Axl e 3 2 0 2 - R -9 1 1 8 32 0 2-G-9 3 41 32 0 2-T-90 4 2 32 0 2-T-94 8 4 32 0 2-K-9 6 3 1 3 2 0 2 - U -9 0 4 3 32 0 2-S-9 1 1 9 3 2 0 2 - H -9 3 4 2 3 2 0 2 - U -9 4 8 5 32 0 2-S-9 8 4 7

RIGHT HAND

Axle RS-21-145 Singl e Axle 3 20 2 -Q-9 1 17 3 2 0 2 - R -9 1 1 8 3 2 02 -F-9 34 0 32 0 2-G-9 3 41 3 2 02 -S-9 04 1 32 0 2-T-9 0 4 2 3 2 0 2 - S- 9 4 8 3 3 2 02 -T-9 4 8 4 3 2 0 2 - H -9 6 2 8 3 2 0 2 -K - 9 6 3 1 3 2 0 2 -S - 9 0 4 1 32 0 2-U -9 0 43 (16) 3 2 02 -Q-91 1 7 32 0 2-S-91 19 (16) 3 20 2 -F-93 4 0 3 2 02 -H -9 34 2 (16) 3 20 2 -S-94 8 3 3 2 02 -U -9 48 5 (16) 3 2 02 -Q-98 4 5 32 0 2-S-98 4 7 (16) RD-17-140 Forward Axle of RT-34-140 Tandem 3 20 2 -Y-9 04 7 3 2 02 -X-9 0 4 6 3 20 2 -E-95 9 9 3 2 0 2 - C -9 5 9 7

(16) (16) (1 6 ) (16) (16)

RS-17-145 Si n gl e Axl e 3 2 02 -X-9 0 46 32 0 2-Y-90 4 7 RS-19-144 Si n gl e 3 2 02 -Q-91 1 7 3 2 02 -F-9 3 40 3 2 0 2 - S- 9 0 4 1

LEFT HAND

(16) (16) (16) (16) (16)

RR-17-140 Rear Axle of RT-34-140 Tandem 3 20 2 -X-9 04 6 3 2 02 -Y-9 0 4 7 3 2 0 2 - C -9 5 9 7 32 0 2-E-95 9 9 RD-17 -1 44 Forward Axle of RT-34-144 Tandem 3 2 0 2 - R -9 1 1 8 32 0 2-Q-9 1 17

3 2 02 -G-93 4 1 3 2 02 -T-9 04 2 3 2 02 -Y-9 46 3 3 20 2 -T-9 48 4 3 2 02 -Q-96 1 1 3 2 0 2 - U -9 6 1 5 3 20 2 -K-9 6 31 3 20 6 -S-13 4 5 3 2 0 6 - U -1 3 4 7 3 20 6 -Y-1 35 1 3 20 6 -A-1 35 3 3202-U-9043 3202-S-9119 3202-H-9342 3202-U-9485 3202-R-9638

(17) (17) (17) (17) (16) (16) (16) (16) (16)

32 0 2-F-9 3 4 0 32 0 2-S-90 4 1 32 0 2-W-94 6 1 3 2 02 -S-9 4 83 3 2 0 2 - N -9 6 0 8 32 0 2-W-96 1 7 3 2 0 2 -H - 9 6 2 8 3206-Q-1343 (17) 3206-T-1346 (17) 3206-W-1349 (17) 3206-Z-1352 (17) 3202-S-9041 3202-Q-9117 3202-F-9340 3202-S-9483 3202-W-9461

Axle RS-19-145 Singl e Axle 3 2 02 -X-9 0 46 32 0 2-Y-90 4 7 3 2 0 2 - C -9 5 9 7

32 0 2-E-9 5 9 9

These s hafts are f or original design design 1.85"-36 spline. spline. (15) These

This s haft has longer s plines plines that engage the diff erential erential lock. (16) This

main diff . lock or No-SPIN No-SPIN units. (17) Not for us e w ith main

(19) No longer available.

22


RIGHT HAND

LEFT HAND

RIGHT HAND

Axle of RT-34-144 Tandem (w/Pump) RP-17-144 Fwd Ax 3 2 0 2 - R -9 1 1 8 3 20 2 -Q-91 1 7 3 2 0 2-G-9 3 41 3 20 2 -F-9 34 0 3 2 0 2-T-90 42 3 20 2 -S-9 04 1 3 2 0 2-T-94 84 3 20 2 -S-9 48 3 3 2 0 2-Q-9 6 11 3 2 0 2 - N -9 6 0 8 3 2 0 2 - U -9 6 1 5 3 20 2 -W-96 1 7 3 2 0 2 - K- 9 6 3 1 3 2 0 2 - H -9 6 2 8

RD-19-144 Forward Axle of RT-38-144 Tandem 32 0 2-R -91 1 8 32 0 2-Q-9 1 17 32 0 2-G-9 3 41 3 2 02 -F-93 4 0 32 0 2-T-9 04 2 3 2 0 2 - S- 9 0 4 1 32 0 2-Y-9 46 3 3 2 02 -W-94 6 1 32 0 2-T-9 48 4 3 2 0 2 -S - 9 4 8 3 32 0 2-Q-96 11 3 2 0 2 - N -9 6 0 8 32 0 2-U -96 1 5 32 02 -W-96 1 7

3206-S-1345 3206-U-1347 3206-Y-1351 3206-A-1353 3202-U-9043 3202-S-9119 3202-H-9342 3202-U-9485 3202-S-9613

3 2 0 2 - K- 9 6 3 1 3206-S-1345 3206-U-1347 3206-Y-1351 3 20 6 -A-1 3 53 3 2 0 2 -U - 9 0 4 3 3 2 0 2 -S - 9 1 1 9 3 2 0 2 -H - 9 3 4 2 3 2 0 2 -U - 9 4 8 5 3202-R-9638

(17) 3206-Q-1343 (17) (17) 3206-T-1346 (17) (17) 3206-W-1349 (17) (17) 3206-Z-1352 (17) (16) 3 20 2-S-9 04 1 (16) 3 20 2-Q-9 11 7 (16) 3 20 2-F-9 3 40 (16) 3 20 2-S-9 48 3 (16) 3 20 2-N -9 60 8

RR-17-144 Rear Axle of RT-34-144 Tandem 3 2 0 2-Q-9 1 1 7 3 2 0 2 - R -9 1 1 8

3 2 0 2-F-93 40 3 2 0 2 - S- 9 0 4 1 3 2 0 2-W-9 46 1 3 2 0 2 - S- 9 4 8 3 3 2 0 2 - N -9 6 0 8 3 2 0 2-W-9 61 7 3 2 0 2 - H -9 6 2 8 3206-Q-1343 (17) 3206-T-1346 (17) 3206-W-1349 (17) 3206-Z-1352 (17) 3 2 0 2 - S- 9 0 4 1 3 2 0 2-Q-9 1 17 3 2 0 2-F-93 4 0 3 2 0 2 - S- 9 4 8 3 3 2 0 2-W-9 46 1

3 20 2 -G-93 4 1 3 20 2-T-9 0 42 3 20 2-Y-9 4 63 3 20 2-T-9 4 84 3 20 2-Q-9 61 1 3 2 0 2 - U -9 6 1 5 3 2 0 2 - K- 9 6 3 1 3206-S-1345 3206-U-1347 3206-Y-1351 3206-A-1353 3 2 0 2 - U -9 0 4 3 3 2 0 2 -S - 9 1 1 9 3 2 0 2 - H -9 3 4 2 3 2 0 2 - U -9 4 8 5 3 2 0 2 - R -9 6 3 8

(17) (17) (17) (17) (16) (16) (16) (16) (16)

(17) (17) (17) (17) (16) (16) (16) (16) (16)

3 2 0 2 - H -9 6 2 8 3206-Q-1343 (17) 3206-T-1346 (17) 3206-W-1349 (17) 3206-Z-1352 (17) 3202-S-9041 3202-Q-9117 3202-F-9340 3202-S-9483 3202-W-9461

Axle of RT-38-144 Tandem (w/Pump) RP-19-144 Fwd Ax 3 2 0 2 - R -9 1 1 8 3 2 02 -Q-9 11 7 3 20 2 -G-93 4 1 32 0 2-F-9 34 0 3 20 2 -T-9 04 2 3 20 2 -T-9 48 4 3 20 2 -Q-96 1 1 3 2 0 2 -U - 9 6 1 5 3 20 2 -K-9 63 1 3206-S-1345 3206-U-1347 3206-Y-1351 3206-A-1353 3202-U-9043 3202-S-9119 3202-H-9342 3202-U-9485 3202-S-9613

(17) (17) (17) (17) (16) (16) (16) (16) (16)

32 0 2-S-90 4 1 32 0 2-S-94 8 3 32 0 2-N -96 0 8 32 0 2-W-9 61 7 3 2 0 2 - H -9 6 2 8 3206-Q-1343 (17) 3206-T-1346 (17) 3206-W-1349 (17) 3206-Z-1352 (17) 3202-S-9041 3202-Q-9117 3202-F-9340 3202-S-9483 3202-N-9608

RD-17-145 Forward Axle of RT-34-145 Tandem 3 2 0 2-Y-90 4 7 3 20 2 -X-9 0 46 3 2 0 2 - E- 9 5 9 9 3 2 0 2 - C -9 5 9 7 RR-17-145 Rear Axle of RT-34-145 Tandem 3 2 0 2-X-90 4 6 3 20 2 -Y-9 0 47 3 2 0 2 - C -9 5 9 7 3 2 0 2 - E- 9 5 9 9 This s haft has longer longer s plines plines that engage the diff erential erential lock. (16) This Not f or use us e w ith main main diff . lock or No-SPIN No-SPIN units. (17) Not

23


RIGHT HAND

LEFT HAND

RIGHT HAND

RR-19-144 Rear Axle o f RT-38-144 Tandem 3 2 02 -Q-91 17 3 2 0 2 - R -9 1 1 8 3 2 02 -F-9 3 40 32 0 2 -G-9 3 41 3 2 0 2 - S- 9 0 4 1 32 0 2 -T-9 04 2 3 2 02 -W-94 6 1 32 0 2 -Y-9 46 3 3 2 0 2 - S- 9 4 8 3 32 0 2 -T-9 48 4 3 2 0 2 - N -9 6 0 8 32 0 2 -Q-9 6 11 3 2 02 -W-96 1 7 3 2 0 2 - U -9 6 1 5

RR-20-140 Rear Axle of RT-40-140 Tandem 32 02 -Q-9 1 17 3 2 0 2 - R -9 1 1 8 3 2 02 -F-93 4 0 3 20 2 -G-93 4 1 3 2 02 -S-9 0 41 3 20 2 -T-9 0 42 3 2 02 -S-9 4 83 3 20 2 -T-9 4 84

3 2 0 2 - H -9 6 2 8 3206-Q-1343 (17) 3206-T-1346 (17) 3206-W-1349 (17) 3206-Z-1352 (17) 3 2 0 2 - S- 9 0 4 1 3 2 02 -Q-91 1 7 3 2 02 -F-9 3 40 3 2 0 2 - S- 9 4 8 3 3 2 02 -W-94 6 1

3 2 02 -G-9 34 1 32 0 2-T-9 04 2 32 0 2-Y-9 46 3 32 0 2-T-9 48 4 32 0 2-Q-9 6 11 32 0 2-U -96 1 5 32 0 2-K-96 3 1 3206-S-1345 3206-U-1347 3206-Y-1351 3206-A-1353 3 2 0 2 - U -9 0 4 3 32 0 2-S-91 1 9 3 2 0 2 - H -9 3 4 2 3 2 0 2 - U -9 4 8 5 3 2 0 2 - R -9 6 3 8

32 0 2 -K-96 3 1 3206-S-1345 3206-U-1347 3206-Y-1351 3206-A-1353 3 2 0 2 - U -9 0 4 3 32 0 2 -S-91 1 9 3 2 0 2 - H -9 3 4 2 3 2 0 2 - U -9 4 8 5 3 2 0 2 - R -9 6 3 8

(17) (17) (17) (17) (16) (16) (16) (16) (16)

MD-20-143 Forw a rd Axl e of MT-4 0 -1 43 Tan de m 3 2 0 2 - S- 9 4 8 3 3 2 0 2 - U -9 4 8 5 3 2 06 -T-1 3 46 3 2 0 6 - U -1 3 4 7

3 2 06 -W-13 4 9 3 2 0 6 - C -1 5 6 3 3 2 06 -F-1 7 48 3 2 0 6 - C -1 8 2 3 3 2 06 -M-18 8 5

32 0 6 -Y-1 35 1 32 0 6 -X-1 74 0 32 0 6 -G-1 7 49 3 2 0 6 - D -1 8 2 4 32 0 6 -P-18 88

RD-20-145 Forward Axle of RT-40-145 Tandem 3 2 0 2 - R -9 1 1 8 3 2 02 -Q-9 11 7

This s haft has longer longer s plines plines that engage the dif dif fer ential ential lock. (16) This

24

(16) (16) (16) (16) (16)

Axle of R T-40-145 Tandem (w/Pump) RP-20-145 Fwd Ax 3 2 0 2 - R -9 1 1 8 3 20 2 -Q-91 1 7

32 0 2-G-9 3 41 orward rd Axle of MT-40-40-14 143 3 Tande andem m (w/ (w/Pu Pump) mp) 3202 3202-T -T-9 -904 042 2 MP-20-143 Forwa 3 2 06 -W-13 4 9 32 0 6 -Y-1 35 1 32 0 2-T-94 8 4 32 0 2-Q-96 1 1 3 2 0 2 - U -9 6 1 5 MR-20-143 R e a r Axl e of MT-4 0 -1 43 Tan d em 3 2 06 -T-1 3 46 3 2 0 6 - U -1 3 4 7 32 0 2-K-96 3 1 3 2 06 -W-13 4 9 32 0 6 -Y-1 35 1 32 0 6-S-13 4 5 3 2 0 6 - C -1 5 6 3 32 0 6 -X-1 74 0 3 2 0 6 - U -1 3 4 7 3 2 06 -F-1 7 48 32 0 6 -G-1 7 49 32 0 6-Y-13 5 1 3 2 0 6 - C -1 8 2 3 3 2 0 6 - D -1 8 2 4 32 0 6-A-13 5 3 3 2 06 -M-18 8 5 32 0 6 -P-18 8 8 3 2 0 2 - U -9 0 4 3 3202-S-9119 Axl e of R T-4 0-1 40 Ta nd e m 3 2 0 2 -H - 9 3 4 2 RD-20-140 Fo rw ard Ax 3 2 0 2 - R -9 1 1 8 32 0 2 -Q-9 1 17 3 2 0 2 - U -9 4 8 5 3 2 02 -G-93 4 1 32 0 2 -F-9 34 0 3 2 02 -S-9 6 13 3 2 02 -T-9 0 42 32 0 2 -S-90 4 1 3 2 02 -T-9 4 84 32 0 2 -S-94 8 3

main diff . lock or No-SPI No-SPIN units. units. (17) Not for us e w ith main

(17) (17) (17) (17)

3 20 2 -F-9 3 40 3 2 0 2 -S - 9 0 4 1 3 2 02 -W-94 6 1 3 2 0 2 -S - 9 4 8 3 3 2 0 2 - N -9 6 0 8 32 02 -W-96 1 7 3 2 0 2 - H -9 6 2 8 3206-Q-1343 (17) 3206-T-1346 (17) 3206-W-1349 (17) 3206-Z-1352 (17) 3202-S-9041 3202-Q-9117 3202-F-9340 3202-S-9483 3202-W-9461

(17) (17) (17) (17) (16) (16) (16) (16) (16)

3 2 02 -F-93 4 0 3202 3202-S -S-9 -904 041 1 3 2 0 2 - S- 9 4 8 3 3 2 0 2 - N -9 6 0 8 3 2 02 -W-9 6 17 3 2 0 2 - H -9 6 2 8 3206-Q-1343 (17) 3206-T-1346 (17) 3206-W-1349 (17) 3206-Z-1352 (17) 3202-S-9041 3202-Q-9117 3202-F-9340 3202-S-9483 3202-N-9608


RIGHT HAND

RR-20-145 Rear Axle of RT-40-145 Tandem 3 2 0 2-Q-9 11 7 3 2 0 2 -R - 9 1 1 8 3 2 0 2-F-93 40 3 20 2 -G-93 4 1 3 2 0 2 - S- 9 0 4 1 3 20 2 -T-90 4 2 3 2 0 2-W-9 46 1 3 20 2 -Y-94 6 3 3 2 0 2 - S- 9 4 8 3 3 20 2 -T-94 8 4 3 2 0 2 - N -9 6 0 8 3 20 2 -Q-96 1 1 3 2 0 2-W-9 61 7 3 2 0 2 -U - 9 6 1 5

3 2 0 2 - H -9 6 2 8 3206-Q-1343 (17) 3206-T-1346 (17) 3206-W-1349 (17) 3206-Z-1352 (17) 3 2 0 2 - S- 9 0 4 1 3 2 0 2-Q-9 11 7 3 2 0 2-F-93 4 0 3 2 0 2 - S- 9 4 8 3 3 2 0 2-W-9 46 1

3 20 2 -K-9 63 1 3206-S-1345 3206-U-1347 3206-Y-1351 3206-A-1353 3 2 0 2 -U - 9 0 4 3 3 2 0 2 -S - 9 1 1 9 3 2 0 2 -H - 9 3 4 2 3 2 0 2 -U - 9 4 8 5 3 2 0 2 -R - 9 6 3 8

(1 7 ) (17) (17) (17) (16) (16) (16) (16) (16)

RD-20-146 Fo rw a rd Axl e o f R T-4 0 -1 4 6 Ta nd e m 3 2 0 2 - R -9 1 1 8 3 20 2 -Q-91 1 7

LEFT HAND

RIGHT HAND

RD-22-145 Forward Axle of RT-44-145 Tandem 3 2 0 2 - R -9 1 1 8 32 0 2-Q-9 1 17 3 2 02 -G-93 4 1 3 2 02 -F-9 3 4 0 3 2 02 -T-9 04 2 3 2 02 -S-9 0 41 3 2 02 -T-9 48 4 3 2 02 -S-9 4 83 3 2 02 -U -9 0 43 (16) 3202-S-9041 3 2 02 -H -9 3 42 (16) 3202-F-9340 3 2 02 -U -94 8 5 (16) 3202-S-9483

Axle of R T-44-145 Tandem (w/Pump) RP-22 -1 45 Forward Ax 3 2 0 2 - R -9 1 1 8 3 20 2 -Q-91 1 7 32 0 2-G-9 34 1 3 20 2 -F-93 4 0 32 0 2-T-9 0 42 3 20 2 -S-9 04 1 32 0 2-T-9 4 84 3 20 2 -S-9 48 3 3202-U-9043 (16) 3202-S-9041 3202-S-9119 (16) 3202-Q-9117 3202-U-9485 (16) 3202-S-9483 RR-22-145 Rear Axle o f RT-44-145 Tandem 3 2 0 2 - S- 9 0 4 1 3 2 02 -T-9 0 4 2

32 0 2-Q-91 1 7 32 0 2-F-9 3 40 orwarrd Ax Axle of of RT RT-40-40-14 146 6 Tan Tande dem m (w/P w/Pump) ump) 3202 3202--S-9483 9483 RP-20-146 Forwa 3 2 0 2 - R -9 1 1 8 3 20 2 -Q-91 1 7 3 2 0 2 - S- 9 0 4 1 32 0 2-F-9 3 40 3 2 0 2 -S - 9 4 8 3 RR-20-146 R e ar Axl e of R T-40 -1 4 6 Tan d em 3 2 0 2-Q-9 11 7 3 2 0 2 -R - 9 1 1 8 3 2 02 -Q-91 1 7

32 0 2-R -91 1 8 3 20 2 -G-93 4 1 3202 3202-T -T--9484 9484 32 0 2-U -90 4 3 3 20 2-H -93 4 2 3 2 0 2 - U -9 4 8 5 32 0 2-S-91 1 9

(16) (16) (16) (16)

This s haft has longer s plines plines that engage the diff erential erential lock. (16) This us e w ith main main diff . lock or No-SPI No-SPIN units. units. (17) Not f or use

25

AXLE SHAFTS

Part Number 3202-G-9601 3202-J-9604 3202-B-9050 3202-Y-9281 3202-C-9051 3206-F-1748 3206-M-1885 3206-Z-1352 16 3206-W-1349 3202-C-9597 3202-X-9046 3206-T-1346 3206-Q-1343 3206-G-1749 3206-P-1888 3206-A-1353 3206-Y-1351 3202-E-9599 3202-Y-9047 3206-U-1347 3206-S-1345 3202-Q-9845 3202-S-9847 3206-C-1563 3206-C-1823 3202-F-9340 3202-Q-9117 3202-S-9483 3202-S-9041 3202-H-9628 3202-W-9617 3202-W-9461 3202-N-9608 3206-X-1740 3206-D-1824 3202-K-9631 3202-G-9341 3202-R-9118 3202-X-9488 3202-H-9342 3202-S-9119 3202-U-9043 3202-T-9484 3202-T-9042 3202-U-9485 3202-U-9615 3202-Y-9619 3202-Y-9463 3202-Q-9611 3202-R-9638 3202-S-9613

Body Dia. 1.62" 1.62" 1.75" 1.75" 1.75" 1.88" 1.88" 1.88" 1.88" 1.88" 1.88" 1.88" 1.88" 1.88" 1.88" 1.88" 1.88" 1.88" 1.88" 1.88" 1.88" 2.00" 2.00" 2.00" 2.00" 2.00" 2.00" 2.00" 2.00" 2.00" 2.00" 2.00" 2.00" 2.00" 2.00" 2.00" 2.00" 2.00" 2.00" 2.00" 2.00" 2.00" 2.00" 2.00" 2.00" 2.00" 2.00" 2.00" 2.00" 2.00" 2.00"

16 No longer available. 26

Length 37.51" 43.54" 37.87" 38.21" 43.89" 35.75" 35.86" 37.06" 37.06" 37.45" 37.63" 37.92" 37.92" 41.70" 41.75" 43.01" 43.01" 43.36" 43.54" 43.87" 43.87" 34.76" 35.60" 35.70" 35.73" 37.18" 37.18" 38.04" 38.04" 38.14" 40.00" 40.73" 40.85" 41.49" 41.68" 42.43" 43.13" 43.13" 43.13" 43.13" 43.13" 43.80" 43.99" 43.99" 44.00" 45.94" 45.94" 46.80" 46.80" 46.80" 46.80"

Spline Size 2.00"-39 2.00"-39 1.85"-36 1.85"-36 1.85"-36 2.10"-41 2.10"-41 2.10"-41 2.10"-41 2.00"-39 2.00"-39 2.10"-41 2.10"-41 2.10"-41 2.10"-41 2.10"-41 2.10"-41 2.00"-39 2.00"-39 2.10"-41 2.10"-41 2.10"-41 2.10"-41 2.10"-41 2.10"-41 2.10"-41 2.10"-41 2.10"-41 2.10"-41 2.10"-41 2.10"-41 2.10"-41 2.10"-41 2.10"-41 2.10"-41 2.10"-41 2.10"-41 2.10"-41 2.10"-41 2.10"-41 2.10"-41 2.10"-41 2.10"-41 2.10"-41 2.10"-41 2.10"-41 2.10"-41 2.10"-41 2.10"-41 2.10"-41 2.10"-41

Spline Len. 2.88" 2.88" 2.60" 2.60" 2.60" 2.88" 2.88" 2.88" 2.88" 2.88" 2.88" 2.88" 2.88" 2.88" 2.88" 2.88" 2.88" 2.88" 2.88" 2.88" 2.88" 2.88" 8.12" 2.88" 2.88" 2.88" 2.88" 2.88" 2.88" 2.88" 2.88" 2.88" 2.88" 2.88" 2.88" 2.88" 2.88" 2.88" 8.12" 8.12" 8.12" 8.12" 2.88" 2.88" 8.12" 2.88" 8.12" 2.88" 2.88" 8.12" 8.12"

Flange Dia. 6.25" 6.25" 6.25" 6.25" 6.25" 6.25" 6.25" 6.25" 6.25" 8.38" 7.93" 7.93" 8.38" 8.38" 6.63" 6.25" 6.25" 8.38" 8.38" 8.38" 7.93" 7.93" 8.38" 8.38" 6.43" 6.25" 6.25" 8.38" 8.38" 8.38" 8.38" 8.38" 8.38" 8.38" 8.38" 8.38" 8.38" 8.38" 8.38" 8.38" 8.38" 8.38" 8.38" 8.38" 8.38" 8.38" 8.38" 8.38" 8.38" 8.38" 8.38" 8.38" 8.38" 8.38" 8.38" 8.38" 8.38" 8.38" 8.38" 8.38" 8.38"

No. of Holes 12 12 12 12 12 8 12 8 8 8 12 8 8 8 12 8 8 8 12 8 8 8 8 8 12 8 8 8 8 8 8 8 8 8 12 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8

Hole Size .50" .50" .50" .50" .50" .73" .59" .73" .78" .63" .50" .64" .73" .73" .59" .73" .78" .63" .50" .64" .73" .73" .73" .73" .59" .73" .78" .64" .73" .73" .78" .64" .73" .73" .59" .73" .73" .78" .64" .73" .78" .73" .64" .73" .64" .78" .78" .64" .73" .64" .73"

Bolt Circle 5.25" 5.25" 5.25" 5.25" 5.25" 7.00" 6.75" 7.00" 7.00" 5.50" 5.25" 7.00" 7.00" 7.00" 6.75" 7.00" 7.00" 5.50" 5.25" 7.00" 7.00" 7.00" 7.00" 7.00" 6.75" 7.00" 7.00" 7.00" 7.00" 7.00" 7.00" 7.00" 7.00" 7.00" 6.75" 7.00" 7.00" 7.00" 7.00" 7.00" 7.00" 7.00" 7.00" 7.00" 7.00" 7.00" 7.00" 7.00" 7.00" 7.00" 7.00"

Hole Type Taper Taper Taper Taper Taper Taper Taper Taper Straight Straight Taper Straight Taper Taper Taper Taper Straight Straight Taper Straight Taper Taper Taper Taper Taper Taper Straight Straight Taper Taper Straight Straight Taper Taper Taper Taper Taper Straight Straight Taper Straight Taper Straight Taper Straight Straight Straight Straight Taper Straight Taper

ROUND BEARING TYPE YOKES

Axle Model (Location) RS-16-140 RS-17-140 (Input) RS-16-141 RS-17-141 RS-17-144 RS-19-144 RS-19-145 RS-21-145 (Input) RT-34-140 RT-40-140 MT-40-143 RT-34-144 RT-38-144 RT-34-145 RT-40-145 RT-44-145 (Fwd. Input) (Fwd. Output) (Original Design 140 Tandem) (Fwd. Output) (All Others) (Rear Input)

Center to End 4.88"

Spline Length 2.25"

Hub Dia. 2.50"

5.54" 6.22" 5.19" 5.16" 6.25" 5.19"

2.31"

3.00"

5.54" 6.22" 5.19" 5.16" 6.25" 5.19" 4.94" 5.38" 5.06" 5.16" 6.03" 5.44" 5.97" 4.88" 5.19" 5.16" 6.25" 5.54" 6.22" 5.19" 5.16" 6.25"

2.31"

3.00"

2.32"

3.25"

2.25"

2.50"

2.31"

3.00"

2.31"

3.00"

Yoke Bearing Cap Dimension Spline Size Dia. Diameter Across Ears No. Teeth Part Number 1.88" 5.31" 1.75"-34 16N-4-5621X 1.94" 6.09" 17NYS28-43A 1.88" 1.88" 1.94" 1.94" 1.94" 1.94"

5.31" 5.31" 7.00" 6.09" 6.09" 7.55"

2.00"-39

1.88" 1.88" 1.94" 1.94" 1.94" 1.94" 1.88" 1.94" 1.94" 1.94" 1.88" 1.88" 1.94" 1.94" 1.94" 1.94" 1.94" 1.88" 1.88" 1.94" 1.94" 1.94"

5.31" 5.31" 7.00" 6.09" 6.09" 7.55" 5.31" 6.09" 7.00" 7.55" 5.31" 5.31" 6.09" 6.09" 7.00" 6.09" 6.09" 5.31" 5.31" 7.00" 6.09" 6.09"

2.00"-39

2.38"-46

1.75"-34

2.00"-39

2.00"-39

Production Part Number A-3280-Q-7115 A-3260-H-8

16N-4-6281X 16N-4-6291X 176NYS32-3A2 17NYS32-100A 17N-4-6391X 18NYS32-12A3

A-3260-G-111 A-3260-H-112 A2-3260-K-115

16N-4-6281X 16N-4-6291X 176N-4-541X 17N-4-6411X 17NYS32-99A 18NYS32-12A3 16NYS38-8A 17N-4-7181X 176NYS38-14A 18NYS38-27A 16N-4-6251 16N-4-6261 17N-4-6321 17N-4-6331 176N-4-531 17NYS32-100 17NYS32-99 16N-4-6281X 16N-4-6291X 176NYS32-3A2 17NYS32-100A 17N-4-6391X

A-3260-G-111 A-3260-H-112 A-3260-K-115 A-3260-Q-121

A1-3260-P-120 A3-3260-L-116

A3-3260-L-116 A-3260-T-1034 A-3260-U-359 A-3260-V-360 3260-U-125 3260-T-124 3260-W-127 3260-V-126 3260-K-115

A-3260-G-111 A-3260-H-112 A2-3260-K-115 A1-3260-P-120

27

WING BEARING TYPE YOKES

Axle Model (Location) RS-16-140 RS-17-140 (Input)

Spline Length 2.25"

Hub Dia. 2.50"

2.31"

3.00"

2.31"

3.00"

4.22"

2.32"

3.81" 4.25" 4.44"

(All Others)

(Rear Input)

RS-16-141 RS-17-141 RS-19-145 RS-21-145 (Input) (Fwd. Input) RT-34-140 RT-34-145 RT-40-145 RT-44-145 (Fwd. Output) (Original Design 140 Tandem)

Keyway Width .63" .63" .56" .56" .56" .63" .63" .63" .63" .63" .63" .63" .63"

3.25"

8.25"

.63"

2.38"-46

2.31"

3.00"

5.84" 8.25" 8.25"

.63" .63" .63"

3.63" 4.69" 4.25" 4.25"

2.25"

2.50"

5.84" 5.84" 5.84" 8.25"

3.81" 3.81" 3.88" 4.25" 4.44"

2.31"

3.00"

5.31" 5.84" 8.13" 8.25" 8.25"

Face to End 3.88" 3.88" 3.31" 3.94" 3.94" 3.75" 3.81" 3.81" 3.88" 4.25" 4.44" 3.81" 4.25"

16 No longer available.

28

Spline Size Dia. - No. Teeth 1.75"-34

Pilot Diameter 5.31" 5.31" 5.53" 5.53" 5.53" 5.84" 5.31" 5.84" 8.13" 8.25" 8.25" 5.84" 8.25"

Part Number 58WBYS28-182A 58WBYS28-186A 62NYS28-160A 62NYS28-201A 62NYS28-202A 72NYS28-166A 58WBYS32-47A 16 72NYS32-244A 82NYS32-74A1 92NYS32-25A1 92NYS32-26A 72NYS32-244A1 92NYS32-25A

Production Part Number A-3260-L-38 A-3260-K-63 A-3260-Z-52 A-3260-Q-1135 A-3260-S-1137 A-3260-F-32 A-3260-S-253 A-3260-S-123 A1-3260-M-117 A1-3260-N-118 A-3260-B-132 A1-3260-S-123 A-3260-N-118

TH

92NYS38-73A

A-3260-K-1129

2.00"-39

TH TH DR

72NYS32-244 92NYS32-25 92NYS32-26

3260-S-123 3260-N-118 3260-B-132

.63" .63" .63" .63"

1.75"-34

TH DR TH DR

72NYS28-176 72NYS28-177 72NYS28-179 92NYS28-5

3260-X-128 3260-Y-129 3260-X-154 3260-A-131

.63" .63" .63" .63" .63"

2.00"-39

TH TH TH TH DR

58WBYS32-47A 72NYS32-244A 82NYS32-74A1 92NYS32-25A1 92NYS32-26A

A-3260-S-253 A-3260-S-123 A1-3260-M-117 A1-3260-N-118 A-3260-B-132

2.00"-39

2.00"-39

Hole Type TH TH TH DR TH TH TH TH TH TH DR TH TH

EASY SERVICE (STRAP) TYPE YOKES

Axle Model (Location) RS-16-140 RS-17-140 (Input)

RS-16-141 RS-17-141 RS-17-144 RS-19-144 RS-19-145 RS-21-145 (Input)

RT-34-140 RT-40-140 RT-34-144 RT-38-144 RT-34-145 RT-40-145 RT-44-145 (Fwd. Input)

(Fwd. Output) (New Design Only) (Rear Input)

MT-40-143 Forward Input Forward Output Rear Input

Center to End 4.19" 4.47" 4.69" 4.66" 4.88" 4.88" 4.75" 4.75" 4.75" 5.54" 6.22" 4.88" 5.19" 6.25" 5.16" 5.19" 4.38" 4.88" 5.19" 6.25" 5.16" 5.19" 4.94" 5.38" 5.06" 5.16" 4.75" 5.54" 6.22" 6.25" 4.75" 4.75" 4.75" 5.54" 6.22" 4.88" 5.19" 6.25" 5.16" 5.19" 5.10" 5.10" 5.32" 5.09" 5.09" 6.39"

Spline Length 2.25"

2.31"

2.31"

Hub Dia. 2.50"

3.00"

3.00"

2.32"

3.25"

2.31"

3.00"

2.31"

3.00"

2.32"

3.25"

2.31" 2.31"

3.00" 3.00"

Bearing Cap Diameter 1.19" 1.38" 1.38" 1.38" 1.88" 1.94" 1.38" 1.38" 1.38" 1.88" 1.88" 1.88" 1.94" 1.94" 1.94" 1.94" 1.38" 1.88" 1.94" 1.94" 1.94" 1.94" 1.88" 1.94" 1.94" 1.94" 1.38" 1.88" 1.88" 1.94" 1.38" 1.38" 1.38" 1.88" 1.88" 1.88" 1.94" 1.94" 1.94" 1.94" 2.17" 2.36" 2.17" 2.17" 2.17"

Distance Between Nibbs 4.19" 4.19" 4.97" 4.97" 5.31" 6.19" 4.19" 4.97" 4.97" 5.31" 5.31" 5.31" 7.09" 6.19" 6.19" 7.63" 4.97" 5.31" 7.09" 6.19" 6.19" 7.63" 5.31" 6.19" 7.09" 7.64" 4.97" 5.31" 5.31" 6.19" 4.19" 4.97" 4.97" 5.31" 5.31" 5.31" 7.09" 6.19" 6.19" 7.63" 6.46" 6.41" 6.46" 6.46" 6.46"

Spline Size Dia. - No. Teeth Hole Type 1.75"-34 DR DR DR DR TH TH 2.00"-39 TH DR TH TH TH TH TH TH TH TH 2.00"-39 TH TH TH TH TH TH 2.38"-46 TH TH TH TH 2.00"-39 DR TH TH TH 2.00"-39 TH DR TH TH TH TH TH TH TH TH 2.38"-46 TH TH 2.00"-39 2.00"-39

Part Number 141DYS28A 148DYS28A 155DYS28-1A 155NYS28-5A 16TYS28-13A 17TYS28-57A 148TYS32-4A 155DYS32-6A 155TYS32-6A 16TYS32-32A 16TYS32-76A 16TYS32-86A 176TYS32-3A1 17TYS32-99A 17N-4-7631-1X 18TYS32-12A1 155TYS32-2A 16N-4-6431-1X 176N-4-541-1X 17TYS32-95A1 17N-4-7641-1X 18N-4-3381-1X 16N-4-7341-1X 17TYS38-76A 176TYS38-27A 18TYS38-27A 155DYS32-6 16N-4-6271-1 16TYS32-76 17TYS32-99 148TYS32-4A 155DYS32-6A 155TYS32-6A 16TYS32-32A 16TYS32-76A 16TYS32-86A 176TYS32-3A1 17TYS32-99A 17N-4-7631-1X 18TYS32-12A1 170TYS38-4A 250TYS38-2A 170TYS32-2 170TYS32-2A 170TYS32-1A

Production Part Number A-3280-J-8070 A-3260-N-248 A-3260-B-2 A-3260-J-1232 A-3260-V-1296 A-3260-S-1241 A-3260-F-318 A-3260-A-1353 A-3260-F-1280 A-3260-D-1668 A1-3260-S-1267 A-3260-R-1292 A1-3260-N-1262 A-3260-W-1037 A-3260-S-1267 A1-3260-R-1292 A-3260-N-1262 A-3260-L-1234

3260-F-318 3260-F-1280 3260-D-1668 A-3260-S-1241 A-3260-F-318 A-3260-A-1353 A-3260-F-1280 A-3260-D-1668 A1-3260-S-1267 A-3260-R-1292 A1-3260-N-1262 A-3260-F-1826 A-3260-H-1828 3260-G-1827 A-3260-G-1827 A-3260-J-1830

29

RPL SERIES YOKES

Axle Model MT-40-143 (Fwd. Input) (Fwd. Output) (Rear Input)

30

Face to End 4.90" 4.73" 5.95" 5.95"

Hub Dia. 3.25" 3.25"

Spline Length 2.32"

3.00" 3.00”

2.31" 2.31"

Yoke Dimension Across Nibbs 7.06" 8.38" 7.06" 7.06"

Spline Size Dia. - No. Teeth Part Number 20WYS38-4A 2.38"-46 25WYS38-13A 2.00"-39 20WYS32-2 20WYS32-2A 2.00"-39

COMPANION FLANGES

Axle Model (Location) Face to End RS-16-140 2.84" RS-17-140 (Input) 2.94" RS-16-141 3.38" RS-17-141 3.31" RS-17-144 RS-19-144 RS-19-145 RS-21-145 (Input) (Fwd. Input) 3.38" RT-34-140 3.31" RT-40-140 2.62" RT-34-144 3.27" RT-38-144 RT-34-145 RT-40-145 RT-44-145 (Fwd. Output) (Original Design 2.94" 140 Tandem) (All Others) 3.31" (Rear Input) 3.38" 3.31"

Spline Length 2.25"

Hub Dia. 2.50"

2.31"

3.00"

2.31"

Pilot Dia. M=Male F=Female F-3.75" F-3.75"

Hole Size .51"

Bolt Circle Dia. 4.75"

.38" .38" .41"

7.25" 6.13" 7.25"

F-7.75" F-6.63" F-7.75"

Flange Dia. Square Flange 8.00" 6.88" 8.00"

3.00"

F-6.63" F-7.75" F-7.75" F-7.75"

6.88" 8.00" 8.00" 8.00"

.38" .41" .44" .40"

6.13" 7.25" 7.25" 7.25"

2.25"

2.50"

F-6.63"

6.88"

.38"

2.31" 2.31"

3.00" 3.00"

F-7.75" F-6.63" F-7.75"

8.00" 6.88" 8.00"

.41" .38" .41"

Spline Size Dia. - No. Teeth Part Number 1.75"-34 2WCS28-73A

Production Part Number A-3260-D-4

5WCS28-54A 3WCS32-73A1 5WCS32-86A2

A-3260-G-7 A1-3260-V-152 A2-3260-F-136

2.00"-39

3WCS32-73A 5WCS32-86A 5WCS32-89A 5WCS32-94A

A-3260-V-152 A-3260-F-136 A-3260-E-213 A-3260-M-325

6.13"

1.75"-34

3WCS28-93

3260-J-10

7.25" 6.13" 7.25"

2.00"-39 2.00"-39

5WCS32-86 3WCS32-73A1 5WCS32-86A2

3260-F-136 A1-3260-V-152 A2-3260-F-136

2.00"-39

31

AXLE AXLE MODEL TO CARRIER T TO O KIT KIT CROSS REFERENCE AXLE

BASE

MODEL

CARRIER

RS- 16- 140

3200- M- 1547 Standar d

RS-17 -17-14 -140

KIT DESCRIPTION

NUMBER

Car r ier ov er haul

KIT RS- 17- 140

Car r ier bear ings and oil s eals

KIT 4345

Pinion bear ing c age s hims

KIT 2313

Pinion bear ing s pac er s

KIT 2321

Main dif f er ential nes t w ith s pider

KIT 2308

Main dif f er ential nes t w ithout s pider

KIT 2309

Ring ge gear to to di differe fferen ntial case case bolts, ts, nu nuts an and wash washers

KIT 2317


KIT 4350


KIT 2313


KIT 2321


KIT 2389


KIT 2431


KIT 2317

3200- L- 1676 Standar d


KIT 4400

3200- Q- 1785 Standar d


KIT 2313

3200- S- 1865 Standar d


KIT 2322


KIT 2389


KIT 2431


KIT 2317

Car r ier and c ap upgr ade to thr us t s c r ew v er er s ion

KIT 2756

3200- L- 1676 Standar d

RS- 16- 141

KIT

3200-M-1 -M-15 547 Sta Stan ndard

See ki kits for for sam same ba base carri carrie er of of RS RS-16 -16-14 -140

3200- L- 1676 Standar d

_

3200-Q-1785 Standard 3200-S-1865 Standard

RS-17 -17-14 -141

3200 3200-M -M-15 -1547 47 NoSpi oSpin n diff. diff.

See See kit kits s for same same base base carrier carrier of of RS-1 RS-16-1 6-140 40 except except

3200- L- 1676 NoSpin dif f .

KIT RS- 17- 140, KIT 2308, KIT 2309, KIT 2389 and

3200 3200-Q -Q-17 -1785 85 NoSpi oSpin n diff. diff.

KIT KIT 2431 2431 cannot cannot be used used as as they they appl apply y to standa standard rd

3200 3200-S -S-18 -1865 65 NoSpi oSpin n diff. diff.

differen differenti tial al nest nest type type carrie carriers. rs.

3200-L-1 -L-16 676 Standard

See kits for for sam same base carri carrie er of of RS RS-16 -16-14 -141

_

3200- Q- 1785 Standar d

_

3200-S-1865 Standard RD- 17- 145

32

3200- G- 1645 Standar d

Car r ier bear ings an and oil s eals ( Pr ior to 11/93)

KIT 4395

3200- T- 1814 Standar d

Car r ier bear ings and oil s eals ( A f ter 11/93)

KIT 4396

3200- B- 1978 Standar d

Input br g c age s hims & pinion inner br g c up s hims

KIT 2429


KIT 2396


KIT 2389


KIT 2431


KIT 2317

Output bear ing s nap r ing s pac er s

KIT 576

Inter-a r-axle xle differe fferen ntial case case and nest (Pri (Prio or to to 10/98)

KIT 2488

Inter - ax ax le le dif f er er ential c as e and nes t ( A ft fter 10 10/98)

KIT 2522

Helic al gear s

KIT 2482

Car r ier and c ap upgr ade to thr us t s c r ew

KIT 2751

Car r ier , c ap and IA D s hif t c y linder upgr ade

KIT 2706

3200 3200-G -G-16 -1645 45 NoSpi oSpin n diff. diff.

See See kit kits s for stan standa dard rd carri carrier er except except

3200- T- 1814 NoSpin dif f .

KIT 2389 and KIT 2431 w hi hic h apply to s tandar d

3200 3200-B -B-1 -197 978 8 NoS NoSpi pin n di diff.

differe different ntiial type type carri carrier ers. s.

_


BASE

MODEL

CARRIER

RP- 17- 145

RR-17 -17-14 -145

KIT KIT DESCRIPTION

NUMBER

3200- X- 1662 Pump

Car r ier bear ings and oil s eals ( Pr ior to 11/93)

KIT 4395

3200- V - 1816 Pump


KIT 4396

3200- H- 1984 Pump


KIT 2429


KIT 2396


KIT 2389


KIT 2431

Ring ge gear to to di differe fferential case case bolts, nuts an and wash washers

KIT 2317


KIT 576


KIT 2488

Inter - ax ax le dif fe f er en ential c a as s e and nes t ( Af Af te ter 10 10/98)

KIT 2522

Helic al gear s

KIT 2482

Input s haf t and pump upgr ade

KIT 2835


KIT 2753

3200 3200-X -X-16 -1662 62 NoSpi oSpin n di diff.

See See kit kits s for carri carrier er with with pum pump p excep exceptt

3200- V - 1816 NoSpin dif f .


3200 3200-H -H-1 -198 984 4 NoS NoSpi pin n di diff.

differe differen ntial tial type type carri carrier ers. s.

3200-L-1 -L-16 676 Standard

See kits for for sam same ba base carri carrie er of of RS RS-16 -16-14 -141

_

3200- Q- 1785 Standar d

_

_

3200-S-1865 Standard RS-19 -19-14 -145

3200-L-1 -L-16 676 Standard

See kits for for sam same ba base carri carrie er of of RS RS-16 -16-14 -141

3200- Q- 1785 Standar d 3200-S-1865 Standard

RD- 20- 140

RR- 20- 140

3200 3200-L-L-16 1676 76 NoSpi oSpin n di diff.

See See kit kits s for same same base base carri carrier of of RS-16 RS-16-14 -141 1 excep exceptt

3200- Q- 1785 NoSpin dif f .


3200 3200-S -S-1 -186 865 5 NoS NoSpi pin n di diff.

differe differen ntial tial type type carri carrier ers. s.

3200- G- 1645 Standar d


KIT RD- 20140NL

3200- T- 1814 Standar d


KIT 4355

3200- BB- 19 1978 Standar d

Car ri rier bear in ings and oils s ea eals ( up updated input s ha haf t) t)

KIT 4356

Input br g c ag age s hi hims & pinion inner br g c up up s hi hims

KIT 2429


KIT 2396


KIT 2310


KIT 2311


KIT 2317


KIT 530


KIT 2488


KIT 2522

Helic al gear s

KIT 2482


KIT 2751


KIT 2706

3200- L- 1676 Standar d


KIT RS- 145 1676

3200- Q- 1785 Standar d


KIT 4400

3200- S- 1865 Standar d


KIT 2313


KIT 2322


KIT 2310


KIT 2311


KIT 2317


KIT 2756

_

33


BASE

MODEL

CARRIER

MR- 20- 143

3200- W- 2051 Standar d

KIT KIT DESCRIPTION

NUMBER

Pinion bear ing s hims

KIT 1647

Pinion bear ing s plit s pac er s

KIT 2541


KIT 4461


KIT 2310


KIT 2311


KIT 2317

MD- 20- 143

3200- G- 1645 Standar d


KIT RD- 20145NL

RD- 17- 144

3200- T- 1814 Standar d


KIT 4395

RD- 19- 144

3200- F- 1852 Standar d


KIT 4396

RD- 20- 145

3200- N- 1860 Standar d


KIT 2429

3200- S- 1917 Standar d


KIT 2396

3200- B- 1978 Standar d


KIT 2310

3200- C- 1979 Standar d


KIT 2311

Ring ge gear to to di differe fferen ntia tial case case bolts, ts, nu nuts and wash washers

KIT 2317


KIT 576


KIT 2488


KIT 2522

Helic al gear s

KIT 2482


KIT 2751


KIT 2706

3200 3200-M -M-16 -1677 77 Diff. lock lock

Sam Same as RD-20-14 -20-145 5 stand standard ard except except for the the follo follow w ing kits: kits:

3200- U- 1815 Dif f . loc k


KIT RD- 20145DL

3200- R- 1890 Dif f . loc k


KIT 4405

3200- E- 1903 Dif f . loc k


KIT 4406

3200- E- 1981 Dif f . loc k

Shif t kit ( bolt on s ty le main dif f . loc k)

KIT 2413

Shif t kit ( s c r ew on on s ty le main dif f . loc k)

KIT 2662

MP- 20- 143

3200- L- 1624 Pump w /loc k


KIT RD- 20145DL

RP- 17- 144

3200- W- 1817 Pump w /l /loc k

Car r ier bear ings an and oil s eals ( Pr ior to 11/93)

KIT 4405

RP- 19- 144

3200- P- 1888 Pump w /l /loc k

Car r ier bear ings and oil s eals ( A f te ter 11/93)

KIT 4406

RP- 20 20- 14 145

3200- DD- 19 1902 Pump w / lo loc k


KIT 2429

3200- K- 1987 Pump w /loc k


KIT 2396


KIT 2310


KIT 2311


KIT 2317


KIT 576


KIT 2488


KIT 2522

Helic al gear s

KIT 2482


KIT 2754


KIT 2705

Input s haf t and pump

KIT 2623


KIT 2413


KIT 2662

34

AXLE AXLE MODEL TO CARRIER CARRIER TO KIT KIT CROSS REFERENCE AXLE

BASE

MODEL

CARRIER

KIT KIT DESCRIPTION

NUMBER

MP- 20- 143

3200- X- 1662 Pump


KIT RD- 20145NL

RP- 17- 144

3200- V - 1816 Pump


KIT 4395

RP- 19- 144

3200- G- 1853 Pump


KIT 4396

RP- 20- 145

3200- H- 1984 Pump


KIT 2429


KIT 2396


KIT 2310


KIT 2311


KIT 2317


KIT 576


KIT 2488


KIT 2522

Helic al gear s

KIT 2482


KIT 2623


KIT 2753

( c ont)

3200 3200-X -X-16 -1662 62 NoSpi oSpin n di diff.

Same ame as as pum pump w ith no no lock lock w ith ith the the foll following

3200-V-1816 3200-V-1816 NoSpin oSpin diff diff .

exceptions: exceptions: KIT KIT RD20145N 20145NL, L, KIT KIT 2310 2310 and KIT KIT 2311 2311

3200 3200-H -H-19 -1984 84 NoSpi oSpin n diff. diff.

appl apply y only only to to stan standa dard rd differen differenti tial al carriers, carriers, not not used used

WITH PUM PUM P

w ith NoSpin. NoSpin.

RR- 17- 144

3200- L- 1676 Standar d


KIT RS- 145 1676

RR- 19- 144

3200- Q- 1785 Standar d


KIT 4400

RR- 20 20- 14 145

3200- DD- 18 1850 Standar d

Pinion br g c ag age s hi hims ( 32 3200- LL- 16 1676 & 3200- M- 18 1885)

KIT 2313

3200- E- 1851 Standar d

Pinion bear ing c age s hims ( all other s )

KIT 1568

3200- S- 1865 Standar d


KIT 2322

3200- M- 1885 Standar d


KIT 2310


KIT 2311


KIT 2317


KIT 2756

Same ame carri carrier ers s as abo above ve

Same as as abo above with with the the foll following owing exce except ptiions: ons:

but but with with NoNo-S Spin pin di diff.

KIT RS-145 -145 1676 1676,, KI KIT 231 2310 and and KIT 2311 2311 appl apply y onl only to standard diff erential erential carriers , not used w ith NoSpi NoSpin. n.

3200- X- 1558 Dif f . loc k


KIT RS- 145 1547

3200- G- 1879 Dif f . loc k


KIT 4390


KIT 2313


KIT 2322


KIT 2310


KIT 2311


KIT 2317

Dif f . loc k ac tuator r epair kit ( bolt- on v er s ion)

KIT 2405

Dif f. f. loc k ac tuator r epair kit ( s c r ew -i - in v er s ion)

KIT 2662


KIT 2755

RS-17 -17-14 -144

3200-L-1 -L-16 676 Standard

RS-19 S-19-14 -144 4

3200 3200-Q -Q-17 -1785 85 Stan Standa dard rd

RS-21-1 S-21-145 45

3200 3200-D -D-18 -1850 50 Stan Standa dard rd

See kits for for sam same ba base carri carrie ers of of RR RR-20 -20-14 -145

3200-E-1851 Standard 3200-S-1865 Standard 3200-M-1885 Standard 3200 3200-L-L-16 1676 76 NoSpi oSpin n di diff.

See See kit kits s for same same base base carri carrier of of RR RR-20-14 -20-145 5

320 3200-X 0-X-155 -1558 8 Diff. lo lock

See kits for sam same base base carri carrier ers s of of RR RR-20-20-14 145 5

3200-G-1879 3200-G-1879 Diff Diff . lock

35


BASE

MODEL

CARRIER

RS- 17- 144

3200- R- 1500 Dif f . loc k

KIT KIT DESCRIPTION

NUMBER


KIT RS- 145 1500

RS- 19- 144


KIT 4385

RS- 21- 145


KIT 2313


KIT 2322


KIT 2310


KIT 2311


KIT 2317

Dif f . loc k ac tuator r epair kit ( bolt- on)

KIT 2405

3200- B- 1874 Standar d


KIT 4395

3200- D- 1980 Standar d

Car r ier bear ings an and oil s eals ( A f ter 11/93)

KIT 4396


KIT 2429


KIT 2396


KIT 2696


KIT 2703

Main dif f er ential c as e upgr ade 3.42 thr u 4.11

KIT 2665

Main dif fe fer ential c as e upgr ade 4.30 and s low er er

KIT 2647


KIT 2317


KIT 576


KIT 2488


KIT 2522

( c ont)

RD- 22- 145

RP- 22- 145

36

Helic al gear s

KIT 2482


KIT 2751


KIT 2706

3200 3200-C -C-18 -1875 75 Diff. lock lock

Sam Same as RD-20-14 -20-145 5 stand standard ard except except for the the follo follow w ing ing kits:

3200- G- 1905 Dif f . loc k


KIT 4405

3200- F- 1982 Dif f . loc k


KIT 4406


KIT 2704


KIT 2664


KIT 2648


KIT 2413


KIT 2691


KIT 2752

3200- E- 1877 Pump w /l / loc k


KIT 4405

3200- H- 1906 Pump w /l /loc k

Car r ier be bear ings an and oil s eals (A (A f te ter 11/93)

KIT 4406

3200- M- 19 1911 Pump w / lo loc k

Input br g c ag age s hi hims & pinion inner br br g c up up s hi hims

KIT 2429

3200- T- 1918 Pump w /loc k


KIT 2396


KIT 2696


KIT 2703


KIT 2664


KIT 2648


KIT 2317


KIT 576


KIT 2488


KIT 2522

Helic al gear s

KIT 2482


KIT 2705

Input s haf t and pump

KIT 2623


KIT 2413


KIT 2691


KIT 2754


BASE

MODEL

CARRIER

RP- 22- 145 ( c ont)

KIT KIT DESCRIPTION

NUMBER

3200- D- 1876 Pump


KIT 4395

3200- P- 1914 Pump


KIT 4396

3200- J- 1986 Pump


KIT 2429


KIT 2396


KIT 2696


KIT 2703

Main dif f er er ential c as e upgr ade 3.42 thr u 4.11

KIT 2665

Main dif fe f er ential c as e upgr ade 4.30 and s low er er

KIT 2647


KIT 2317


KIT 576


KIT 2488


KIT 2522

Helic al gear s

KIT 2482


KIT 2623


KIT 2753


Same as as abo above with with th the fol following owing exce except ptiions: ons:


KIT RD2014 20145N 5NL L, KI KIT 2310 2310 and and KI KIT 2311 2311 appl apply y onl only to standard diff erential erential carr iers, not used w ith NoSpi NoSpin. n.

RR- 22- 145

3200- A - 1873 Standar d


KIT 4400


KIT 2313


KIT 2322


KIT 2696


KIT 2703


KIT 2665


KIT 2647


KIT 2317


KIT 2756


Same as as abo above with with the the foll following owing exce except ptiions: ons:


KIT RS-14 -145 167 1676 6, KI KIT 231 2310 and and KIT 2311 2311 appl apply y onl only to standard diff erential erential carriers , not used w ith NoSpi NoSpin. n.

3200- F- 1904 Dif f . loc k


KIT 4390


KIT 2313


KIT 2322


KIT 2696


KIT 2703


KIT 2664


KIT 2648


KIT 2317

Dif f . loc k ac tuator r epair kit ( bolt- on)

KIT 2405


KIT 2755

37

SERVICE KITS KITS KIT RD20140NL ITEM

1 2 3 4 5 6 7 8 9

PART NUMBER KIT 2310 KIT 2396 KIT 2429 KIT 576 KIT 2488 40-X-1145 KIT 2637 KIT 4395 JM-511945

QTY.

1 1 1 1 1 1 1 1 1

DESCRIPTION

Main Diff. Kit with Spider Spacer Kit Shim Kit Snap Ring Kit IAD Kit Nut Input Nut and Washer Kit Bearing & Seal Kit Bearing Cone

REMARKS

Without diff. lock, old style welded IAD RD-20-140

KIT RD20145DL ITEM

1 2 3 4 5 6 7 8 9 10 11 12

PART NUMBER KIT 2310 KIT 2396 KIT 2429 KIT 576 KIT 2488 40-X-1145 KIT 2637 KIT 4405 JM-511945 40-X-1233 1229-N-1730 A1-1205-X-2728

QTY.

1 1 1 1 1 1 1 1 1 1 1 1

DESCRIPTION

Main Diff. Kit with Spider Spacer Kit Shim Kit Snap Ring Kit IAD Kit Nut Input Nut and Washer Kit Bearing & Seal Kit Bearing Cone Lock Nut Washer Oil Seal Assembly

REMARKS

With diff. lock, old style welded IAD. Later model bolted IAD carriers can use this kit. RD-17-144, RD-19-144, RD-20-145, RP-17-144, RP-19-144, RP-20-145

KIT RD20145NL ITEM

1 2 3 4 5 6 7 8 9 10 11 12

PART NUMBER KIT 2310 KIT 2396 KIT 2429 KIT 576 KIT 2488 40-X-1145 KIT 2637 KIT 4395 JM-511945 40-X-1233 1229-N-1730 A1-1205-X-2728

QTY.

1 1 1 1 1 1 2 1 1 1 1 1

DESCRIPTION

Main Diff. Kit with Spider Spacer Kit Shim Kit Snap Ring Kit IAD Kit Nut Input Nut and Washer Kit Bearing & Seal Kit Bearing Cone Lock Nut Washer Oil Seal Assembly

REMARKS

Without diff. lock, old style welded IAD. Later model bolted IAD carriers can use this kit. RD-17-144, RD-19-144, RD-20-145, RP-17-144, RP-19-144, RP-20-145

KIT RR22145 1873 ITEM

1 2 3 4 5

PART NUMBER KIT 2696 KIT 2637 KIT 2322 KIT 1568 KIT 4400

QTY.

1 1 1 1 1

DESCRIPTION

Main Diff. Kit with Spider Input Nut and Washer Kit Spacer Kit Shim Kit Bearing & Seal Kit

REMARKS

Less diff lock. RR-22-145

KIT RS145 1500 ITEM

1 2 3 4 5


QTY.

1 1 1 1 1

DESCRIPTION


REMARKS

For 3200-R-1500 DCDL carriers. RR-20-145, RS-21-145

KIT RS145 1547 ITEM

1 2 3 4 5

38


QTY.

1 1 1 1 1

DESCRIPTION


REMARKS

For DCDL carriers other than 3200-R-1500. RR-17-144, RR-19-144, RR-20-145, RS-17-144, RS-19-144, RS-21-145

SERVICE KITS KITS KIT KIT RS145 1676 ITEM

1 2 3 4 5 6

PART NUMBER KIT 2310 KIT 2637 KIT 2322 KIT 2313 KIT 4400 KIT 1568

QTY.

1 1 1 1 1 1

DESCRIPTION

Main Diff. Kit with Spider Input Nut and Washer Kit Spacer Kit Shim Kit Bearing & Seal Kit Shim Kit

REMARKS

Non-DCDL carriers. RR-20-140, RR-20-145, RS-17-144, RS-19-144

KIT KIT RS17140 ITEM

1 2 3 4 5


QTY.

1 1 1 1 1

DESCRIPTION

Main Diff. Kit with Spider Fastener Kit Spacer Kit Shim Kit Bearing & Seal Kit

REMARKS

RS-16-140, RS-17-140

KIT 530 ITEM

1 2 3 4 5 6 7 8 9 10

PART NUMBER 1229-A-2237 1229-B-2238 1229-C-2239 1229-D-2240 1229-E-2241 1229-F-2242 1229-G-2243 1229-H-2244 1229-J-2246 1229-K-2247

QTY.

1 1 1 1 1 1 1 1 1 1

DESCRIPTION

Snap Ring - 3.94mm/.155 in. Snap Ring - 4.01mm/.158 in. Snap Ring - 4.09mm/.161 in. Snap Ring - 4.17mm/.164 in. Snap Ring - 4.24mm/.167 in. Snap Ring - 4.32mm/.170 in. Snap Ring - 4.39mm/.173 in. Snap Ring - 4.47mm/.176 in. Snap Ring - 4.55mm/.179 in. Snap Ring - 4.62mm/.182 in.

REMARKS

Output shaft snap ring kit RD-20-140

KIT 576 ITEM

1 2 3 4 5 6 7 8 9 10

PART NUMBER 1229-P-2590 1229-Q-2591 1229-R-2592 1229-S-2593 1229-T-2594 1229-U-2595 1229-V-2596 1229-W-2597 1229-X-2598 1229-Y-2599

QTY.

1 1 1 1 1 1 1 1 1 1

DESCRIPTION

Ring-Snap Ring-Snap Ring-Snap Ring-Snap Ring-Snap Ring-Snap Ring-Snap Ring-Snap Ring-Snap Ring-Snap

REMARKS

Output shaft snap ring kit MD-20-143, MP-20-143, RD-17-144, RD-17-145, RD-19-144, RD-20-145, RD-22-145, RP-17-144, RP-17-145, RP-19-144, RP-20-145, RP-22-145

KIT 1568 ITEM

1 2 3 4

PART NUMBER 2203-C-8115 2203-D-8116 2203-E-8117 2203-B-9804

QTY.

1 3 4 1

DESCRIPTION

Shim - .075mm/.003 in. Shim - .125mm/.005 in. Shim - .250mm/.010 in. Shim - .500mm/.020 in.

REMARKS

3200-S-1865 or all single or rear/rear models using pinion bearing shim OD 8.5" 140 Series

KIT 1647 ITEM

1 2 3

PART NUMBER 2203-F-2788 2203-G-2789 2203-H-2790

QTY.

3 2 4

DESCRIPTION

Shim - .075mm/.003 in. Shim - .125mm/.005 in. Shim - .250mm/.010 in.

REMARKS

For Amboid drive axle. MR-20-143M, RD-17-144, RD-17-145, RD-19-144, RD-19-145, RD-20-145, RD-22-145, RP-17-144, RP-17-145, RP-19-144, RP-19-145, RP-20-145, RP-22-145

KIT 2308 ITEM

1 2 3 4 5

PART NUMBER 2233-M-1027 2234-T-1086 3278-D-82 1229-Z-3172 1229-L-1026

QTY.

4 2 1 2 4

DESCRIPTION

Differential Pinion, Finished Differential Side Gear, Finished Differential Spider Thrust Washer Thrust Washer

REMARKS

With diff. spider (1.85"-36 spline side gear). Original design. RS-16-140, RS-17-140

39

SERVICE KITS KITS KIT 2309 ITEM

1 2 3 4

PART NUMBER 2233-M-1027 2234-T-1086 1229-Z-3172 1229-L-1026

QTY.

4 2 2 4

DESCRIPTION

Differential Pinion, Finished Differential Side Gear, Finished Thrust Washer Thrust Washer

REMARKS

Less diff. spider (1.85"-36 spline side gear). Original design. RS-16-140, RS-17-140

KIT 2310 ITEM

1 2 3 4 5

PART NUMBER 2233-J-1024 2234-U-1269 3278-S-305 1229-V-4624 1229-R-1032

QTY.

4 2 1 2 4

DESCRIPTION

Differential Pinion, Finished Differential Side Gear, Finished Differential Spider Thrust Washer Thrust Washer

REMARKS

With diff. spider (2.10"-41 spline side gear). MD-20-143, MP-20-143, MR-20-143, RD/RP/RR-17-144, RD/RP/RR-19-144, RD/RR-20-140, RD/RP/RR-20-145, RS-17-144, RS-19-144, RS-21-145

KIT 2311 ITEM

1 2 3 4

PART NUMBER 2233-J-1024 2234-U-1269 1229-V-4624 1229-R-1032

QTY.

4 2 2 4

DESCRIPTION

Differential Pinion Differential Side Gear, Finished Thrust Washer Thrust Washer

REMARKS

Less diff. spider (2.10"-41 spline side gear). MD/MP/MR-20-143, RD/RP/RR-17-144, RD/RP/RR-19-144, RD/RR-20-140, RD/RP/RR-20-145, RS-17-144, RS-19-144, RS-21-145

KIT 2313 ITEM

1 2 3 4

PART NUMBER 2803-Q-2851 2803-R-2852 2803-S-2853 2803-T-2854

QTY.

3 2 4 1

DESCRIPTION

Shim - .075mm/.003 in. Shim - .125mm/.005 in. Shim - .250mm/.010 in. Shim - .500mm/.020 in.

REMARKS

3200-L-1676 or all single or rear/rear models using pinion bearing shim OD 9.62". 140 Series

KIT 2317 ITEM

1 2 3

PART NUMBER 41-X-1216 1229-U-1503 40-X-1182

QTY.

12 12 12

DESCRIPTION

Capscrew Washer-Flat Lock Nut

REMARKS

Gear to case bolt kit (17.0 mm bolts prior to 4-88). MD/MP/MR-20-143, RD/RP/RR-17-144, RD/RP/RR-17-145, RD/RP/RR-19-144, RD/RR-20-140, RD/RP/RR-20-145, RD/RP/RR-22-145, RS-16-140, RS-16-141, RS-17-140, RS-17-141, RS-17-144, RS-17-145, RS-19-144, RS-19-145, RS-21-145

KIT 2321 ITEM

1 2 3 4 5 6 7 8 9 10 11

PART NUMBER 2203-V-9486 2203-W-9487 2203-X-9488 2203-Y-9489 2203-Z-9490 2203-A-9491 2203-B-9492 2203-C-9493 2203-D-9494 2203-E-9495 2203-F-9496

QTY.

2 2 2 2 2 2 2 2 2 2 2

DESCRIPTION

Spacer - 8.35mm/.329 in. Spacer - 8.38mm/.330 in. Spacer - 8.40mm/.331 in. Spacer - 8.43mm/.332 in. Spacer - 8.45mm/.333 in. Spacer - 8.58mm/.338 in. Spacer - 8.70mm/.343 in. Spacer - 8.73mm/.344 in. Spacer - 8.75mm/.345 in. Spacer - 8.78mm/.346 in. Spacer - 8.80mm/.347 in.

REMARKS

Pinion bearing spacers RS-16-140, RS-17-140

KIT 2322 ITEM

1 2 3 4 5 6 7 8 9 10 11

40

PART NUMBER 2203-J-9474 2203-K-9475 2203-L-9476 2203-M-9477 2203-N-9478 2203-P-9480 2203-Q-9481 2203-R-9482 2203-S-9483 2203-T-9484 2203-U-9485

QTY.

2 2 2 2 2 2 2 2 2 2 2

DESCRIPTION

Spacer - 8.75mm/.345 in. Spacer - 8.78mm/.346 in. Spacer - 8.80mm/.347 in. Spacer - 8.83mm/.348 in. Spacer - 8.85mm/.349 in. Spacer - 8.98mm/.354 in. Spacer - 9.10mm/.354 in. Spacer - 9.13mm/.359 in. Spacer - 9.15mm/.360 in. Spacer - 9.18mm/.361 in. Spacer - 9.20mm/.362 in.

REMARKS

Pinion bearing spacers RR-17-144, RR-17-145, RR-19-144, RR-20-140, RR-20-145, RR-22-145, RS-16-141, RS-17-141, RS-17-144, RS-19-144, RS-19-145, RS-21-145


1 2 3 4 5

PART NUMBER 2233-J-1024 2234-V-1270 3278-S-305 1229-V-4624 1229-R-1032

QTY.

4 2 1 2 4

DESCRIPTION

Differential Pinion Differential Side Gear, Finished Differential Spider Thrust Washer Thrust Washer

REMARKS

With diff. spider (2.00"-39 spline side gear). RD-17-145, RP-17-145, RS-16-140, RS-16-141, RS-17-140, RS-17-141

KIT 2396 ITEM

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

PART NUMBER 2203-D-9806 2203-E-9807 2203-F-9808 2203-G-9809 2203-H-9810 2203-J-9812 2203-K-9813 2203-L-9814 2203-M-9815 2203-N-9816 2203-P-9818 2203-Q-9819 2203-R-9820 2203-S-9821 2203-T-9822 2203-U-9823

QTY.

2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

DESCRIPTION

Spacer - 5.30mm/.209 in. Spacer - 5.33mm/.210 in. Spacer - 5.35mm/.211 in. Spacer - 5.38mm/.212 in. Spacer - 5.40mm/.213 in. Spacer - 5.50mm/.217 in. Spacer - 5.60mm/.220 in. Spacer - 5.70mm/.224 in. Spacer - 5.80mm/.228 in. Spacer - 5.90mm/.232 in. Spacer - 6.00mm/.236 in. Spacer - 6.10mm/.240 in. Spacer - 6.13mm/.241 in. Spacer - 6.15mm/.242 in. Spacer - 6.18mm/.243 in. Spacer - 6.20mm/.244 in.

REMARKS

Pinion bearing spacers MD-20-143, MP-20-143, RD-17-145, RD-20-140, RD-20-145, RD-22-145, RP-17-145, RP-20-145, RP-22-145

KIT 2405 ITEM

1 2 3 4 5 6

PART NUMBER 3196-F-32 2230-N-170 5-X-1153 2208-H-944 41-X-1364 MWA-506

QTY.

1 1 1 1 4 4

DESCRIPTION

Tube,Fin. Piston O-Ring Gasket Capscrew Washer

REMARKS

Minor repair kit for original design main differential lock carriers. RD-20-145, RP-20-145, RP-22-145, RR-20-145, RR-22-145, RS-21-145

KIT 2413 ITEM

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

PART NUMBER 3296-W-1167 3107-D-1018 2244-L-1026 43-X-1006 2258-L-714 3196-F-32 2230-N-170 5-X-1153 2208-H-944 3266-F-1020 MWA-506 41-X-1364 2208-L-1000 MS-210016-1 41-X-1333 3237-W-1167 1227-P-1056 2257-M-1235

QTY.

1 1 1 1 1 1 1 1 1 1 4 4 1 1 1 1 1 1

DESCRIPTION

Shift Fork, Finished Clutch Collar Shift Shaft Roll Pin Spring Tube,Fin. Piston O-Ring Gasket Cover,Fin. Washer Capscrew Gasket Capscrew Capscrew Switch Assembly Sensor Sensor Adjusting Nut Sensor/Switch Clip

REMARKS

RD-20-145, RD-22-145, RP-20-145, RP-22-145

41


1 2 3 4 5 6 7

PART NUMBER 2233-U-1035 2234-R-1188 3892-S-5843 2297-E-5335 3278-A-1119 1229-T-1606 1229-S-4985

QTY.

4 1 1 1 1 4 1

DESCRIPTION

Differential Pinion Differential Side Gear, Finished Forward IAD Gear Snap Ring Differential Spider, Finished Thrust Washer Thrust Washer

REMARKS

IAD nest kit for the bolted IAD. Includes forward and rear side gears. For carr iers built after 10/98. MD-20-143, MP-20-143, RD-17-144, RP-17-144, RD-19-144, RP-19-144, RD-17-145, RP-17-145, RD-19-145, RP-19-145, RD-20-145, RP-20-145

KIT 2429 ITEM

1 2 3 4 5 6

PART NUMBER 2203-K-9241 2203-L-9242 2203-M-9243 2203-F-2788 2203-G-2789 2203-H-2790

QTY.

1 1 4 1 1 4

DESCRIPTION

Shim - .076mm/.003 in. Shim - .127mm/.005 in. Shim - .254mm/.010 in. Shim - .075mm/.003 in. Shim - .125mm/.005 in. Shim - .250mm/.010 in.

REMARKS

MD-20-143, MP-20-143, RD-17-144, RD-17-145, RD-19-144, RD-20-140, RD-20-145, RD-22-145, RP-17-144, RP-17-145, RP-19-144, RP-20-145, RP-22-145

KIT 2431 ITEM

1 2 3 4

PART NUMBER 2233-J-1024 2234-V-1270 1229-V-4624 1229-R-1032

QTY.

4 2 2 4

DESCRIPTION


REMARKS

Less diff. spider (2.00"-39 spline side gear). RD-17-145, RP-17-145, RR-17-145, RS-16-140, RS-16-141, RS-17-140, RS-17-141, RS-19-145

KIT 2445 ITEM

1 2 3 4 5 6 7 8 9 10 11 12 13

PART NUMBER 3261-R-1084 3266-Q-1161 2230-D-1096 2244-D-1070 2258-E-1175 5-X-1195 5-X-1196 5-X-1197 1229-P-4280 1229-W-1245 MS-206060-1 41-X-1080 MWA-506

QTY.

1 1 1 1 1 1 1 1 1 1 4 2 6

DESCRIPTION

Shift Unit Cylinder, Finished Cover, Finished Piston Differential Lock Out Push Rod Spring O-Ring O-Ring O-Ring Snap Ring Snap Ring Capscrew Special Screw Washer

REMARKS

For "reverse-air" Navistar only. 140 Series

KIT 2446 ITEM

1 2 3 4 5 6 7

42

PART NUMBER 2258-E-1175 2230-D-1096 5-X-1195 5-X-1196 5-X-1197 1229-P-4280 1229-W-1245

QTY.

1 1 1 1 1 1 1

DESCRIPTION

Spring Piston O-Ring O-Ring O-Ring Snap Ring Snap Ring

REMARKS

For "reverse-air" Navistar only. 140 Series


1 2 3

PART NUMBER 3892-S-5843 3892-N-4902 1229-S-4985

QTY.

1 1 1

DESCRIPTION

Forward IAD Gear Helical Driven Gear Thrust Washer

REMARKS

MD-20-143, MP-20-143, RD-17-145, RD-20-140, RD-20-145, RD-22-145, RP-17-145, RP-22-145

KIT 2488 ITEM

1 2 3 4 5

PART NUMBER A-3235-W-2025 2234-R-1188 3892-S-5843 1229-S-4985 2297-E-5335

QTY.

1 1 1 1 1

DESCRIPTION

Interaxle Differential Case & Nest Assembly Differential Side Gear, Finished Forward IAD Gear Thrust Washer Snap Ring

REMARKS

Old style IAD (1.77"-34 spline side gear). Services all forward carriers built before 10/98. After 10/98 use KIT 2522. RD-17-145, RD-20-140, RD-20-145, RD-22-145, RP-17-145, RP-20-145, RP-22-145

KIT 2511 ITEM

1 2 3

PART NUMBER 3216-S-4361 42-X-1248 1229-H-4428

QTY.

2 2 2

DESCRIPTION

Tube Finished Special Washer Snap Ring

REMARKS

ABS carrier 2"-39 spline RD-20-145, RP-20-145, RR-20-145

KIT 2512 ITEM

1 2 3

PART NUMBER 3216-Q-4359 42-X-1248 1229-H-4428

QTY.

2 2 2

DESCRIPTION

Tube,Fin. Special Washer Snap Ring

REMARKS

ABS carrier 2.10"-41 spline RD-17-145, RR-17-145

KIT 2522 ITEM

1 2 3 4 5

PART NUMBER A-3235-N-2380 2234-R-1188 3892-S-5843 1229-S-4985 2297-E-5335

QTY.

1 1 1 1 1

DESCRIPTION

Interaxle Differential Case & Nest Assembly Differential Side Gear, Finished Forward IAD Gear Thrust Washer Snap Ring

REMARKS

New style IAD. Use for carriers built a fter 10/98. MD-20-143, MP-20-143, RD-17-144, RD-17-145, RD-19-144, RD-20-140, RD-20-145, RD-22-145, RP-17-144, RP-17-145, RP-19-144, RP-20-145, RP-22-145

KIT 2541 ITEM

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

PART NUMBER 1244-M-2431 1244-N-2432 1244-P-2434 1244-Q-2435 1244-R-2436 1244-S-2437 1244-T-2438 1244-U-2439 1244-V-2440 1244-W-2441 1244-X-2442 1244-Y-2443 1244-Z-2444 1244-A-2445 1244-B-2446 1244-C-2447

QTY.

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

DESCRIPTION

Spacer - 9.40mm/.370 in. Spacer - 9.43mm/.371 in. Spacer - 9.45mm/.372 in. Spacer - 9.48mm/.373 in. Spacer - 9.50mm/.374 in. Spacer - 9.60mm/.378 in. Spacer - 9.70mm/.382 in. Spacer - 9.80mm/.386 in. Spacer - 9.90mm/.390 in. Spacer - 10.00mm/.394 in. Spacer - 10.10mm/.398 in. Spacer - 10.20mm/.402 in. Spacer - 10.23mm/.403 in. Spacer - 10.25mm/.404 in. Spacer - 10.28mm/.405 in. Spacer - 10.30mm/.406 in.

REMARKS

For Amboid drive axle. MR-20-143

KIT 2636 ITEM

1 2

PART NUMBER 40-X-1236 1229-A-2653

QTY.

1 1

DESCRIPTION

Lock Nut Washer-Flat

REMARKS

M32 x 1.5 nut thread. Rear input, front output. 140 Series

KIT 2637 ITEM

1 2

PART NUMBER 40-X-1237 1229-T-1736

QTY.

1 1

DESCRIPTION

Lock Nut Washer-Flat

REMARKS

M39 x 1.5 nut thread. Front input, rear input. 140 Series

KIT 2638 ITEM

1 2

PART NUMBER 40-X-1233 1229-W-4521

QTY.

1 1

DESCRIPTION

Lock Nut Washer

REMARKS

M45 x 1.5 nut thread. Front input. 140 Series

43


1 2 3 4 5

PART NUMBER 3235-T-2152 3235-U-2153 41-X-1327 1229-C-1511 3278-Y-1117F

QTY.

1 1 16 16 1

DESCRIPTION

Half Flange Differential Case, Finished Plain Half Differential Spider, Finished Special Screw Washer-Flat Differential Spider, Finished

REMARKS

Diff. case and spider update kit. For 44,000 lb. tandems without differential lock. 4.30 ratio and slower. RD-22-145, RP-22-145, RR-22-145

KIT 2648 ITEM

1 2 3 4 5

PART NUMBER 3235-T-2152 3235-V-2154 41-X-1327 1229-C-1511 3278-Y-1117F

QTY.

1 1 16 16 1

DESCRIPTION

Half Flange Differential Case, Finished Plain Half Differential Case, Finished Special Screw Washer-Flat Differential Spider, Finished

REMARKS

Diff. case and spider update kit. For 44,000 lb. tandems with differential lock. 4.30 ratio and slower. RD-22-145, RP-22-145, RR-22-145

KIT 2662 ITEM

1 2 3 4 5 6 7 8 9

PART NUMBER 3296-Z-1170 3107-D-1018 3237-W-1167 2257-M-1235 2258-N-1262 5-X-521 A-3261-A-1067 41-X-1368 2244-Z-1222

QTY.

1 1 1 1 1 1 1 1 1

DESCRIPTION

Shift Fork, Finished Clutch Collar Switch Assembly Sensor Sensor/Switch Clip Spring O-Ring DCDL Shift Cylinder Caging Bolt Push Rod

REMARKS

Screw in air shift cage kit for post 11/93 DCDL 145 series carriers RD-17-144, RD-19-144, RD-20-145, RD-22-145, RP-17-144, RP-19-144, RP-20-145, RP-22-145, RR-17-144, RR-19-144, RR-20-145, RR-22-145, RS-17-144, RS-19-144, RS-21-145

KIT 2664 ITEM

1 2 3 4 5

PART NUMBER 3235-D-2188 3235-V-2154 41-X-1327 1229-C-1511 3278-Y-1117F

QTY.

1 1 16 16 1

DESCRIPTION

Half Flange Differential Case, Finished Plain Half Differential Case, Finished Special Screw Washer-Flat Differential Spider, Finished

REMARKS

Diff. case and spider update kit. For 44,000 lb. tandems with differential lock. Ratios 3.42 thru 4.11. RD-22-145, RP-22-145, RR-22-145

KIT 2665 ITEM

1 2 3 4 5

PART NUMBER 3235-D-2188 3235-U-2153 41-X-1327 1229-C-1511 3278-Y-1117F

QTY.

1 1 16 16 1

DESCRIPTION

Half Flange Differential Case, Finished Plain Half Differential Spider, Finished Special Screw Washer-Flat Differential Spider, Finished

REMARKS

Diff. case and spider update kit. For 44,000 lb. tandems with differential lock. Ratios 3.42 thru 4.11. RD-22-145, RP-22-145, RR-22-145

KIT 2668 ITEM

1 2 3

PART NUMBER 10-X-1594 10-X-1597 1229-W-1557

QTY.

7 3 12

DESCRIPTION

Screw-Special Screw-Special Washer-Hardened

REMARKS

Carrier to housing capscrew kit. 145 Series Forward

KIT 2686 ITEM

1 2

PART NUMBER 2244-D-1070 3266-Q-1161

QTY.

1 1

DESCRIPTION

Differential Lock Out Push Rod Cover, Finished

REMARKS

Navistar "reverse air" shift RD-20-145, RD-22-145, RP-20-145, RP-22-145

KIT 2691 ITEM

1 2 3 4

44

PART NUMBER A-3261-A-1067 2244-Z-1222 41-X-1368 5-X-521

QTY.

1 1 1 1

DESCRIPTION

DCDL Shift Cylinder Push Rod Caging Bolt O-Ring

REMARKS

Main diff. lock, screw-in shift, Services all new style screw- in type main differential lock carriers. MD-20-143, MP-20-143, RD-17-144, RD-19-144, RD-20-145, RD-22-145, RP-17-144, RP-19-144, RP-20-145, RP-22-145, RR-17-144, RR-19-144, RR-20-145, RS-17-144, RS-19-144, RS-21-145


1 2 3 4 5

PART NUMBER 2233-X-1116 2234-X-1272 3278-Y-1117F 1229-V-4624 1229-R-1032

QTY.

4 2 1 2 4

DESCRIPTION

Differential Pinion Differential Side Gear, Finished Differential Spider, Finished Thrust Washer Thrust Washer

REMARKS

With diff. spider (2.10"-41 spline side gear) RD-22-145, RP-22-145, RR-22-145

KIT 2703 ITEM

1 2 3 4

PART NUMBER 2233-X-1116 2234-X-1272 1229-V-4624 1229-R-1032

QTY.

4 2 2 4

DESCRIPTION


REMARKS

Less diff. spider (2.10"-41 spline side gear) RD-22-145, RP-22-145, RR-22-145

KIT 2704 ITEM

1 2

PART NUMBER KIT 2752 KIT 2825

QTY.

1 1

DESCRIPTION

Update Kit Shift Kit

REMARKS

Carrier and cap update kit (with diff. lock, less pump) RD-20-145, RD-22-145

KIT 2705 ITEM

1 2


QTY.

1 1

DESCRIPTION


REMARKS

Carrier and cap update kit (with diff. lock, with pump) RD-20-145, RP-22-145

KIT 2706 ITEM

1 2


QTY.

1 1

DESCRIPTION


REMARKS

Carrier and cap update kit (less diff. lock, less pump) MD-20-143, RD-17-145, RD-20-140, RD-20-145, RD-22-145

KIT 2709 ITEM

1 2 3 4

PART NUMBER 5-X-1195 5-X-1196 5-X-1197 1229-P-4280

QTY.

1 1 1 1

DESCRIPTION

O-Ring O-Ring O-Ring Snap Ring

REMARKS

Navistar "reverse air" shift RD-17-145, RD-20-140, RD-20-145, RD-22-145, RP-20-145, RP-22-145

KIT 2730 ITEM

1 2 3 4 5

PART NUMBER A2-3200-L-1676 A8-3235-W-1843 JM-716610 JM-716649 2214-C-1095

QTY.

1 1 1 1 1

DESCRIPTION

Differential Carrier and Cap Assembly Case Assy-Diff Bearing Cup Bearing Cone Bearing Adjuster Ring, Finished

REMARKS

Carrier and cap update kit (with diff case assembly, all ratios except 3.91 and 4.10) less diff. lock RR-20-145, RR-22-145, RS-21-145

KIT 2743 ITEM

1 2 3

PART NUMBER A-3235-W-2025 3107-M-1183 3296-Z-1326

QTY.

1 1 1

DESCRIPTION

Interaxle Differential Case & Nest Assembly Clutch Collar Shift Fork, Finished

REMARKS

Inter-axle diff., shift fork and clutch collar, old style RD-17-145, RD-20-140, RD-20-145, RD-22-145, RP-17-145, RP-20-145, RP-22-145

KIT 2747 ITEM

1 2 3 4 5

PART NUMBER A2-3200-E-1981 KIT 2691 2206-L-1156 3296-Z-1170 2258-N-1262

QTY.

1 1 1 1 1

DESCRIPTION

Differential Carrier and Cap Assembly Shift Cylinder Kit Elbow Fitting Shift Fork, Finished Spring

REMARKS

Carrier and cap update kit (with diff. lock, less pump) RD-20-145

45


1 2 3 4 5

PART NUMBER A-3261-A-1067 2244-Z-1222 2258-N-1262 5-X-521 41-X-1368

QTY.

1 1 1 1 1

DESCRIPTION

DCDL Shift Cylinder Push Rod Spring O-Ring Caging Bolt

REMARKS

Main diff. lock, screw-in shift, Services all new style screw- in type main differential lock carriers. MD-20-143, MP-20-143, RD-17-144, RD-19-144, RD-20-145, RD-22-145, RP-17-144, RP-19-144, RP-20-145, RP-22-145, RR-17-144, RR-19-144, RR-20-145, RS-17-144, RS-19-144, RS-21-145

KIT 2751 ITEM

1 2 3

PART NUMBER A2-3200-D-1980 41-X-1371 40-X-1016

QTY.

1 1 1

DESCRIPTION

Differential Carrier and Cap Assembly Thrust Screw Jam Nut

REMARKS

Carrier and cap update kit (less diff. lock, less pump, with thrust screw) MD-20-143, RD-17-145, RD-20-140, RD-20-145, RD-22-145

KIT 2752 ITEM

1 2 3 4 5

PART NUMBER A2-3200-F-1982 KIT 2691 2206-L-1156 3296-Z-1170 2258-N-1262

QTY.

1 1 1 1 1

DESCRIPTION


REMARKS

Carrier and cap update kit (with diff. lock, less pump, with thrust screw) RD-22-145

KIT 2753 ITEM

1 2 3

PART NUMBER A2-3200-J-1986 41-X-1371 40-X-1016

QTY.

1 1 1

DESCRIPTION


REMARKS

Carrier and cap update kit (less diff. lock, with pump, with thrust screw) RP-22-145

KIT 2754 ITEM

1 2 3 4 5

PART NUMBER A2-3200-L-1988 KIT 2691 2206-L-1156 3296-Z-1170 2258-N-1262

QTY.

1 1 1 1 1

DESCRIPTION


REMARKS

Carrier and cap update kit (with diff. lock, with pump, with thrust screw) MP-20-143, RP-20-145, RP-22-145

KIT 2755 ITEM

1 2 3 4 5 6 7

PART NUMBER A2-3200-F-1904 KIT 2691 2206-L-1156 3296-Z-1170 2258-N-1262 40-X-1016 41-X-1371

QTY.

1 1 1 1 1 1 1

DESCRIPTION

Differential Carrier and Cap Assembly Shift Cylinder Kit Elbow Fitting Shift Fork, Finished Spring Jam Nut Thrust Screw

REMARKS

Carrier and cap update kit (with diff. lock, with thrust screw) RR-20-145, RR-22-145, RS-21-145

KIT 2756 ITEM

1 2 3

PART NUMBER A2-3200-A-1873 41-X-1371 40-X-1016

QTY.

1 1 1

DESCRIPTION


REMARKS

Carrier and cap update kit (with thrust screw) RR-17-145, RR-20-140, RR-20-145, RR-22-145, RS-16-141, RS-17-141, RS-19-145, RS-21-145

KIT 2758 ITEM

1 2

46

PART NUMBER 2234-V-1270 1229-V-4624

QTY.

1 1

DESCRIPTION

Differential Side Gear, Finished Thrust Washer

REMARKS

Side gear and washer kit (2"-39 spline side gear) RD-17-145, RP-17-145, RR-17-145, RS-16-140, RS-16-141, RS-17-140, RS-17-141, RS-19-145


1 2

PART NUMBER 2234-U-1269 1229-V-4624

QTY.

1 1

DESCRIPTION


REMARKS

Side gear and washer kit (2.1"-41 spline side gear) RD-20-140, RD-20-145, RP-20-145, RR-20-140, RR-20-145, RS-21-145

KIT 2760 ITEM

1 2

PART NUMBER 2234-X-1272 1229-V-4624

QTY.

1 1

DESCRIPTION


REMARKS

Side gear and washer kit (2.1"-41 spline side gear) RD-22-145, RP-22-145, RR-22-145

KIT 2761 ITEM

1 2

PART NUMBER 1229-G-1021 1229-J-4638

QTY.

1 1

DESCRIPTION

Washer-Flat Washer-Lock

REMARKS

RD-17-145, RP-17-145, RR-17-145, RS-16-140, RS-16-141, RS-17-140, RS-17-141, RS-17-145, RS-19-145

KIT 2819 ITEM

1 2 3

PART NUMBER 1229-D-4632 2297-F-6324 41-X-1327

QTY.

16 1 16

DESCRIPTION

Washer-Hardened Loctite Special Screw

REMARKS

Diff case capscrew kit. 145 Series

KIT 2824 ITEM

1 2

PART NUMBER 2244-Z-1222 A-3261-A-1067

QTY.

1 1

DESCRIPTION

Push Rod DCDL Shift Cylinder

REMARKS

Main Differential Kit 140 Series

KIT 2825 ITEM

1 2

PART NUMBER 2244-Y-1221 A4-3261-Q-1057

QTY.

1 1

DESCRIPTION

Push Rod IAD Shift Cylinder Assembly

REMARKS

I.A.D. shift cylinder kit. 145 Series

KIT 2833 ITEM

1 2 3 4

PART NUMBER A1-1205-X-2728 A1-3297-T-1346 A-3226-D-1226 JM-511945

QTY.

1 1 1 1

DESCRIPTION

Oil Seal Assembly Input Shaft Assembly Bearing Cage Assembly Bearing Cone

REMARKS

Converts 145 series pump version 2"-39 input shaft to 2.35"-46 spline version. 145 Series

KIT 2834 ITEM

1 2 3 4

PART NUMBER A1-1205-X-2728 A-3226-V-1296 A-3297-U-1347 JM-511945

QTY.

1 1 1 1

DESCRIPTION

Oil Seal Assembly Bearing Cage Assembly Input Shaft Assembly Bearing Cone

REMARKS

Converts 145 series less pump version 2"-39 input shaft to 2.35"-46 spline version. 145 Series

KIT 2835 ITEM

1 2

PART NUMBER A-3303-P-1030 KIT 2833

QTY.

1 1

DESCRIPTION

Oil Pump Assembly Input Shaft Conv. Kit

REMARKS

Pump update kit MP-20-143, RP-17-145, RP-20-145, RP-22-145

KIT 4007 ITEM

1 2

PART NUMBER 1229-S-4985 3892-S-5843

QTY.

1 1

DESCRIPTION

Thrust Washer Forward IAD Gear

REMARKS

Helical drive gear and thrust washer, replacing 3892-R-4932. 145 Series Forward

47


1 2 3

PART NUMBER 41-X-1637 1199-R-2176 1246-P-1134

QTY.

2 2 1

DESCRIPTION

Capscrew Cotter Pin Spirol Pin

REMARKS

Lock pin kit 145 Series

KIT 4345 ITEM

1 2 3 4 5 6 7 8 9 10

PART NUMBER JM-716610 1228-L-1130 55200C M804049 1228-F-552 JM-716649 A-1228-L-1130 55437 M804010 A-1205-D-1928

QTY.

1 1 1 1 1 1 1 1 1 1

DESCRIPTION

Bearing Cup Bearing Cup Bearing Cone Bearing Cone Spigot Bearing Bearing Cone Bearing Cone Bearing Cup Bearing Cup Seal Assy

REMARKS

RS-16-140, RS-17-140

KIT 4350 ITEM

1 2 3 4 5 6 7 8

PART NUMBER M804010 M804049 55437 55200C 1228-F-552 JM-716610 JM-716649 A-1205-D-1928

QTY.

1 1 1 1 1 2 2 1

DESCRIPTION

Bearing Cup Bearing Cone Bearing Cup Bearing Cone Spigot Bearing Bearing Cup Bearing Cone Seal Assy

REMARKS

RS-16-140, RS-17-140

KIT 4356 ITEM

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

PART NUMBER H715311 72487 JLM-710910 H715334 72212C LM-603011 JM-716610 JLM-710949C 3920 A1-1205-X-2728 A-1205-G-2425 5-X-1034 JM-511945 LM-603049 JM-716649 5-X-1343

QTY.

1 1 1 1 1 2 2 1 1 1 1 1 1 2 2 1

DESCRIPTION

Bearing Cup Bearing Cup Bearing Cup Bearing Cone Bearing Cone Bearing Cup Bearing Cup Bearing Cone Bearing Cup Oil Seal Assembly Seal Assembly O-Ring Bearing Cone Bearing Cone Bearing Cone O-Ring

REMARKS

New Style Thru-Shaft RD-20-140

KIT 4385 ITEM

1 2 3 4 5 6 7

48

PART NUMBER 72212C 55206C A1-1228-H-606 72487 55437 1228-F-552 A1-1205-Z-2730

QTY.

1 1 2 1 1 1 1

DESCRIPTION

Bearing Cone Bearing Cone Tapered Bearing Assembly Bearing Cup Bearing Cup Spigot Bearing Oil Seal Assembly

REMARKS

RR-20-145, RR-22-145, RS-21-145


1 2 3 4 5 6 7 8 9 10

PART NUMBER JM-716649 A-1228-L-1130 JM-716610 1228-L-1130 72487 55437 72212C 55206C 1228-F-552 A1-1205-Z-2730

QTY.

1 1 1 1 1 1 1 1 1 1

DESCRIPTION

Bearing Cone Bearing Cone Bearing Cup Bearing Cup Bearing Cup Bearing Cup Bearing Cone Bearing Cone Spigot Bearing Oil Seal Assembly

REMARKS

RR-17-144, RR-19-144, RR-20-145, RR-22-145, RS-17-144, RS-19-144, RS-21-145

KIT 4395 ITEM

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

PART NUMBER H715311 72487 JLM-710910 H715334 72212C JLM-104910 JM-716610 JLM-710949C JM511910 R945008 5-X-1034 5-X-1343 JM-511946 3920 LM-104949 JM-716649

QTY.

1 1 1 1 1 2 2 1 1 2 1 1 1 1 2 2

DESCRIPTION

Bearing Cup Bearing Cup Bearing Cup Bearing Cone Bearing Cone Bearing Cup Bearing Cup Bearing Cone Bearing Cup Oil Seal Assembly O-Ring O-Ring Bearing Cone Bearing Cup Bearing Cone Bearing Cone

REMARKS

Pre 11/93 RD-17-145, RD-20-145, RD-22-145, RP-17-145, RP-20-145, RP-22-145

KIT 4396 ITEM

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

PART NUMBER H715311 72487 JLM-710910 H715334 72212C JLM-104910 JM-716610 JLM-710949C 3920 A1-1205-Y-2729 A1-1205-X-2728 5-X-1034 5-X-1343 JM-511945 LM-104949 JM-716649

QTY.

1 1 1 1 1 2 2 1 1 1 1 1 1 1 1 1

DESCRIPTION

Bearing Cup Bearing Cup Bearing Cup Bearing Cone Bearing Cone Bearing Cup Bearing Cup Bearing Cone Bearing Cup Oil Seal Assembly Oil Seal Assembly O-Ring O-Ring Bearing Cone Bearing Cone Bearing Cone

REMARKS

Forward Axles less diff. lock, with new input and thru shaft MD-20-143, MP-20-143, RD-17-144, RD-17-145, RD-19-144, RD-20-145, RD-22-145, RP-17-144, RP-17-145, RP-19-144, RP-20-145, RP-22-145

KIT 4400 ITEM

1 2 3 4 5 6 7 8

PART NUMBER 72487 72212C 55437 55206C 1228-F-552 JM-716610 JM-716649 A1-1205-Z-2730

QTY.

1 1 1 1 1 2 2 1

DESCRIPTION

Bearing Cup Bearing Cone Bearing Cup Bearing Cone Spigot Bearing Bearing Cup Bearing Cone Oil Seal Assembly

REMARKS

RR-17-144, RR-17-145, RR-19-144, RR-20-140, RR-20-145, RR-22-145, RS-16-141, RS-17-141, RS-17-144, RS-19-144, RS-19-145, RS-21-145

49


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

PART NUMBER 72487 72212C H715311 H715334 3920 JM-511945 JLM-710910 JLM-710949C 1228-L-1130 A-1228-L-1130 JM-716610 JM-716649 JLM-104910 LM-104949 A1-1205-Y-2729 A1-1205-X-2728 5-X-1034 5-X-1343

QTY.

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

DESCRIPTION

Bearing Cup Bearing Cone Bearing Cup Bearing Cone Bearing Cup Bearing Cone Bearing Cup Bearing Cone Bearing Cup Bearing Cone Bearing Cup Bearing Cone Bearing Cup Bearing Cone Oil Seal Assembly Oil Seal Assembly O-Ring O-Ring

REMARKS

Forward Axles with diff. lock, with new input and thru shaft MD-20-143, MP-20-143, RD-17-144, RD-19-144, RD-20-145, RD-22-145, RP-17-144, RP-19-144, RP-20-145, RP-22-145

KIT 4455 ITEM

1 2

PART NUMBER 3237-W-1167 2257-M-1235

QTY.

1 1

DESCRIPTION

Switch Assembly Sensor Sensor/Switch Clip

REMARKS

With diff. lock 140 Series

KIT 4461 ITEM

1 2 3 4 5 6 7

PART NUMBER 72487 72225C H715311 H715334 JM-716610 JM-716649 A1-1205-Z-2730

QTY.

1 1 1 1 2 2 1

DESCRIPTION

Bearing Cup Bearing Cone Bearing Cup Bearing Cone Bearing Cup Bearing Cone Oil Seal Assembly

REMARKS

For Amboid drive axle. MR-20-143

KIT 4766 ITEM

1 2

PART NUMBER 10-X-1710 2297-P-8336

QTY.

1 1

DESCRIPTION

Thrust Screw Thrust Block

REMARKS

Thrust screw and block kit for 3200-W-2051 amboid carrier. MR-20-143M, MS-21-143M

MPS 3344 145 145 ITEM

1 2 3 4 5 6 7 8 9 10

50

PART NUMBER A-3297-U-1347 1229-S-4985 3892-S-5843 A-3235-W-2025 2297-E-5335 2234-R-1188 A1-1205-X-2728 2203-K-9241 2203-L-9242 2203-M-9243

QTY.

1 1 1 1 1 1 1 1 1 1

DESCRIPTION

Input Shaft Assembly Thrust Washer Forward IAD Gear Interaxle Differential Case & Nest Assembly Snap Ring Differential Side Gear, Finished Oil Seal Assembly Shim - .076mm/.003 in. Shim - .127mm/.005 in. Shim - .254mm/.010 in.

REMARKS

Input shaft/IAD update kit for 2.38"-46 s pline, less pump version. 145 Series

SERVICE KITS KITS MPS 3345 145 ITEM

1 2 3 4 5 6 7 8 9 10

PART NUMBER A1-3297-T-1346 1229-S-4985 3892-S-5843 A-3235-W-2025 2297-E-5335 2234-R-1188 A1-1205-X-2728 2203-K-9241 2203-L-9242 2203-M-9243

QTY.

1 1 1 1 1 1 1 1 1 1

DESCRIPTION

Input Shaft Assembly Thrust Washer Forward IAD Gear Interaxle Differential Case & Nest Assembly Snap Ring Differential Side Gear, Finished Oil Seal Assembly Shim - .076mm/.003 in. Shim - .127mm/.005 in. Shim - .254mm/.010 in.

REMARKS

Input shaft/IAD update kit for 2.38"-46 spline, for pump version. 145 Series

51

XpresswayPlus.com Don't forget about using XpresswayPlus.com for: Ordering parts online Reference Library Order status The Company Store Price and availability Easy to use navigating instructions Visual search for new users Dealer/Distributor Dealer/Distributor loc ator Online e-mail or phone numbers for Customer Service, Information Services, Marketing, Catalog, and eSupport 

















XpresswayPlus is easy to find, c an reduce reduce phone calls , and s ave ave you valuable valuable time.

52

WHAT YOU N E E D:

WHE R E TO LOOK :

AC C OU N T C H AN GE AFTER MAR KET & PR OD U C TION ASSEMBL IES APPL IC ATION IN FOR MATION BIL L -OF-L AD IN G N U MBER BIL L -OF-MATER IAL BU L L ETIN S C ON TAC T N AMES & N U MBER S FIEL D SU PPOR T R EPR ESEN TATIVES IN VOIC E (VIEW & PR IN T) N EWSL ETTER OR D ER D ETAIL S OR D ER H ISTOR Y FILE OR D ER MER C H AN D ISE OR D ER SU BMIT OR DE DER SU SU BM BMIT - STOC K U PL PL OA OAD (M (MU LT LTIPLE L IN IN ES ES) PAR T D ETAILS PAR T IMAGES PAR T N U MBER C OMPAR ISON PAR TS BOOKS PASSWOR D C H AN GE PR IC E (L IST) PR IC E (N ET) & AVAILABIL ITY PR OD U C T BR OC H U R ES PR OD U C T U PD ATES PR OOF-OF-D EL IVER Y R EQ EQU ES EST-FOR -QU OTATION (F (FOR ME MER ITOR BR BR AN D ) SAL ES LITER ATU R E SEN D QU ESTION S, C OMMEN TS, ISSU ES SH IPPER N U MBER TEC H TIPS TR AC KIN G N U MBER WAR R AN TY IN FOR MATION WH ER E-U SED IN FOR MATION

C U STOMER SER VIC E C ATAL OG C ATAL OG OR D ER STATU S C ATAL OG R EFER EN C E LIBR AR Y C U STOMER SER VIC E C U STOMER SER VIC E OR D ER STATU S R EFER EN C E LIBR AR Y OR D ER STATU S OR D ER STATU S C OMPAN Y STOR E C R EATE N EW OR D ER C RE REATE N EW EW OR DE DER C ATAL OG C ATAL OG C ATAL OG R EFER EN C E L IBR AR Y C U STOMER SER VIC E C ATAL OG PR IC E & AVAIL ABILITY R EFER EN C E LIBR AR Y R EFER EN C E LIBR AR Y OR D ER STATU S PR IC E RE REQU EST R EFER EN C E LIBR AR Y C ON TAC T U S OR D ER STATU S R EFER EN C E L IBR AR Y OR D ER STATU S R EFER EN C E L IBR AR Y C ATAL OG

NUMERICAL PARTS LISTI LISTING NG PART NUMBER

PAGE

PART NUMBER

PAGE

PART NUMBER

PAGE

5- X- 521

8,18

1229- W- 1245

5

1244- S- 2437

11

5- X- 1034 5- X- 1153 5- X- 1195 5- X- 1196 5- X- 1197

4 8,18 5 5 5

1229- A- 1301 1229- U- 1503 1229- C- 1511 1229- W- 1557 1229- K- 1597

13 8,14 4,11 21 4,6

1244- T - 2438 1244- U- 2439 1244- W- 2441 1244- X- 2442 1244- Y- 2443

11 11 11 11 11

5- X- 1198 10- X- 1594 10- X- 1597 10- X- 1710 15- X- 387

8,18 21 21 13 20

1229- T - 1606 1229- E- 1669 1229- N- 1730 1229- T - 1736 1229- A- 2237

4 4,9,21 4 4,11,20 20

1244- Z - 2444 1244- A- 2445 1244- B- 2446 1244- C- 2447 1246- M- 1131

11 11 11 11 9

40- X- 1016 40- X- 1145 40- X- 1182 40- X- 1233 40- X- 1236 40- X- 1237 41- X- 1022 41- X- 1043 41- X- 1080 41- X- 1208 41- X- 1209 41- X- 1216 41- X- 1327 41- X- 1330 41- X- 1333 41- X- 1359 41- X- 1364 41- X- 1365 41- X- 1368 41- X- 1371 42- X- 1021 42- X- 1248 43- X- 1006 43- X- 1007 1199- R - 2176 A- 1205- W- 1349 A- 1205- D - 1928 A- 1205- G- 2425 A- 1205- Q- 2487 1220- K- 89 1227- R - 330 1227- W- 517 1227- Z - 1040 1227- E- 1045 1227- P- 1056 1228- F - 552 A1- 1228- H - 606 1228- L- 1130

6,13 6 8,14 4, 6 11,20 4,11,20 8,19 11 5,18 4 5 8,14 7,18 18 8,18 19 9,19 8,13 8,18 6,13 8,13 9,19 8,18 9,18 8,13 21 11 20 21 18 21 21 21 21 8,19 13 14 6,14

1229- B- 2238 1229- C- 2239 1229- D- 2240 1229- E- 2241 1229- F - 2242 1229- G- 2243 1229- H- 2244 1229- J- 2246 1229- K- 2247 1229- P- 2590 1229- Q- 2591 1229- R- 2592 1229- T - 2594 1229- U- 2595 1229- V- 2596 1229- W- 2597 1229- X- 2598 1229- Y- 2599 1229- A- 2653 1229- S- 2593 1229- Z - 3172 1229- F - 4062 1229- G- 4063 1229- W- 4131 1229- P- 4280 1229- B- 4422 1229- H- 4428 1229- U- 4519 1229- W- 4521 1229- X- 4522 1229- V- 4624 1229- D- 4632 1229- F - 4634S 1244- V- 1764 1244- F - 2346 1244- V- 2440 1244- M- 2431 1244- N - 2432

20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 11,20 20 17 9 6 20 4 9,19 9,19 9,19 6 8,17 8,17 7,18 21 6 12 11 11 11

1246- P- 1134 1250- E- 473 1250- N- 1080 1250- U- 1217 1250- L- 1286 2203- F - 2788 2203- G- 2789 2203- H- 2790 2203- C- 8115 2203- D- 8116 2203- E- 8117 2203- K- 9241 2203- L- 9242 2203- M- 9243 2203- J- 9474 2203- K- 9475 2203- L- 9476 2203- M- 9477 2203- N- 9478 2203- P- 9480 2203- Q- 9481 2203- R- 9482 2203- S- 9483 2203- T - 9484 2203- U- 9485 2203- V- 9486 2203- W- 9487 2203- X- 9488 2203- Y- 9489 2203- Z - 9490 2203- A- 9491 2203- B- 9492 2203- C- 9493 2203- D- 9494 2203- E- 9495 2203- F - 9496 2203- B- 9804 2203- D- 9806

8 21 9 8 21 6 ,1 1 6 ,1 1 6 ,1 1 11 11 11 4 4 4 11 11 11 11 11 11 11 11 11 11 11

A- 1228- L- 1130 1229- L- 1026 1229- R - 1032

18 8,18

1244- P- 2434 1244- Q- 2435 1244- R- 2436

11 11

7,14

11

2203- E- 9807 2203- F - 9808 2203- G- 9809

12 12 12 12 12 12 12 12 12 12 12 11 6 6 6 6

53

NUMERICAL PARTS LISTING STING

54

PART NUMBER

PAGE

PART NUMBER

PAGE

PART NUMBER

PAGE

2203- H - 9810

6

2803- R - 2852

11

3202- S- 9483

26

2203- J- 9812 2203- K- 9813 2203- L- 9814 2203- M- 9815 2203- N - 9816

6 6 6 6 6

2803- S- 2853 2803- T - 2854 3107- R - 1006 3107- D - 1018 3107- M- 1183

11 11 18 9,18 4

3202- T - 9484 3202- U- 9485 3202- X- 9488 3202- C- 9597 3202- E- 9599

26 26 26 26 26

2203- P- 9818 2203- Q- 9819 2203- R - 9820 2203- S- 9821 2203- T - 9822

6 6 6 6 6

3196- F - 32 A2- 3200- R - 1500 A2- 3200- G- 1645 A2- 3200- X- 1662 A2- 3200- L- 1676

8,18 13 5 5 13

3202- G- 9601 3202- J- 9604 3202- N- 9608 3202- Q- 9611 3202- S- 9613

26 26 26 26 26

2203- U - 9823 2208- P- 536 2208- H - 944 2208- L- 1000 2208- R - 1058 2214- L- 272 2214- Y- 1039 2214- C - 1095 2214- U - 1139 2230- N - 170 2230- D - 1096 2230- T - 1190 2233- J- 1024 2233- M- 1027 2233- U - 1035 2233- X- 1116 2234- T - 1086 2234- R - 1188 2234- U - 1269 2234- V- 1270 2234- X- 1272 2244- Z - 52 2244- K- 1025 2244- L- 1026 2244- D - 1070 2257- M- 1235 2258- U - 411 2258- L- 714 2258- Z - 1118 2258- E- 1175 2258- U - 1243 2258- N - 1262 2297- T - 4180 2297- U - 5273 2297- Z - 5278 A- 2297- D- 5334 2297- E- 5335 2297- A- 7021

6 21 8,18 9,19 5 13 6,13 6,13 13 8,18 5 8,18 8,18 18 4 8,18 17 4 8,17 8,17 8,17 18 4 8,18 4 8,19 4 8,18 9 4 9,19 8,18 14 9 9

5 13 13 13 5 13 13 13 13 5 5 13 5 5 13 5 5 5 5 5 5 5 5 5 13 26 26 26 26 26 26 26 26 26 26 26 26

3202- U- 9615 3202- W- 9617 3202- Y- 9619 3202- R- 9638 3202- Q- 9845 3202- S- 9847 3206- Q- 1343 3206- S- 1345 3206- T - 1346 3206- U- 1347 3206- W- 1349 3206- Y- 1351 3206- Z - 1352 3206- A- 1353 3206- C- 1563 3206- C- 1823 3206- D- 1824 3206- M- 1885 3206- P- 1888 3216- Q- 4359 3216- S- 4361 3221- P- 1004 A- 3226- M- 1053 A- 3226- P- 1056 A- 3226- T - 1112 A- 3226- Z - 1222 A- 3226- B- 1224 A- 3226- D- 1226 A- 3226- N- 1236 A- 3226- V- 1296 A- 3230- T - 1034 A- 3230- U- 1035 A- 3230- V- 1036 A4- 3235- C - 1719 A6- 3235- C - 1719 A12- 3235- C - 1719 A13- 3235- C - 1719 A6- 3235- E- 1721

26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 9,19 9,19 4 11 11 20 4 4 4 11 4 8 ,1 8 8,18 18 16 14

4 20,21

A2- 3200- G- 1853 A2- 3200- C - 1849 A2- 3200- D - 1850 A2- 3200- E- 1851 A2- 3200- F - 1852 A2- 3200- S- 1865 A2- 3200- A- 1873 A2- 3200- G- 1879 A2- 3200- M- 1885 A2- 3200- D - 1902 A2- 3200- E- 1903 A2- 3200- F - 1904 A2- 3200- P- 1914 A2- 3200- S- 1917 A2- 3200- Z - 1924 A2- 3200- B- 1978 A2- 3200- C - 1979 A2- 3200- D - 1980 A2- 3200- E- 1981 A2- 3200- F - 1982 A2- 3200- H - 1984 A2- 3200- J- 1986 A2- 3200- K- 1987 A2- 3200- L- 1988 A2- 3200- W- 2051 3202- S- 9041 3202- T - 9042 3202- U - 9043 3202- X- 9046 3202- Y- 9047 3202- B- 9050 3202- C - 9051 3202- Q- 9117 3202- R - 9118 3202- S- 9119 3202- Y- 9281 3202- F - 9340 3202- G- 9341

2297- C - 7049 2297- P- 8336 2803- Q- 2851

18 13 11

3202- H - 9342 3202- W- 9461 3202- Y- 9463

26 26 26

A8- 3235- E- 1721 A14- 3235- E- 1721 A15- 3235- E- 1721

14 16 14

9

26

16 14 16

NUMERICAL PARTS LISTI LISTING NG PART NUMBER

PAGE

PART NUMBER

PAGE

PART NUMBER

PAGE

A2- 3235- Y- 1741

14

A3- 3235- L-2170

7,14

5 5 2 0 0C

12

A3- 3235- Y- 1741 A- 3235- S- 1839 A1- 3235- S- 1839 A2- 3235- S- 1839 A3- 3235- S- 1839

16 14 15 7,14 7,15

A4- 3235- L-2170 A5- 3235- L-2170 A2- 3235- M- 2171 A3- 3235- M- 2171 A4- 3235- M- 2171

7,17 7,17 7,14 7,14 7,17

5 5 2 0 6C 55437 7 2 2 1 2C 7 2 2 2 5C 72487

11 1 1 ,1 2 6 ,1 2 11 6 ,1 1 , 1 2

A8- 3235- S- 1839 A9- 3235- S- 1839 A10- 3235- S- 1839 A11- 3235- S- 1839 A12- 3235- S- 1839

7,14 7,15 7 7,17 7,17

A5- 3235- M- 2171 A2- 3235- N- 2172 A3- 3235- N- 2172 A6- 3235- N- 2172 A7- 3235- N- 2172

7,17 14 14 17 17

141D YS28A 148D YS28A 148T YS32- 4A 155D YS28- 1A 155D YS32- 6

29 29 29 29 29

A- 3235- U - 1841 A1- 3235- U - 1841 A2- 3235- U - 1841 A3- 3235- U - 1841 A8- 3235- U - 1841 A9- 3235- U - 1841 A10- 3235- U- 1841 A11- 3235- U- 1841 A12- 3235- U- 1841 A- 3235- W- 1843 A1- 3235- W- 1843 A2- 3235- W- 1843 A3- 3235- W- 1843 A8- 3235- W- 1843 A9- 3235- W- 1843 A10- 3235- W- 1843 A11- 3235- W- 1843 A12- 3235- W- 1843 A2- 3235- V- 1920 A3- 3235- V- 1920 A8- 3235- V- 1920 A9- 3235- V- 1920 A10- 3235- V- 1920 A11- 3235- V- 1920 A12- 3235- V- 1920 A18- 3235- V- 1920 A- 3235- N - 1938 A1- 3235- N - 1938 A- 3235- Q- 1941 A1- 3235- Q- 1941 A- 3235- W- 2025 A4- 3235- T - 2152 A10- 3235- T - 2152 A11- 3235- T - 2152 A2- 3235- J- 2168 A3- 3235- J- 2168 A4- 3235- J- 2168 A5- 3235- J- 2168

14 16 7,14 7,15 7,14 7,15 7 7,17 7,16 14 16 7,14 7,15 7,14 7,15 7,15 7,16 7,16 7,14 7,15 7,14 7,15 7 7,17 7,17 16 14 16 14 16 4 8,17 7 7, 7 ,15 7,15 7,15 7,17 7,17

A- 3235- D- 2188 A2- 3235- D- 2188 A4- 3235- D- 2188 A10- 3235- D - 2188 A11- 3235- D - 2188 A2- 3235- Y- 2261 A- 3235- N- 2380 A2- 3235- N- 2380 3237- W- 1167 A- 3261- L- 350 3261- A- 1067 3261- R- 1084 3266- M- 897 3266- C- 1095 3266- F - 1020 3266- Q- 1161 3278- D - 82 3278- S- 305 3278- Y- 1117F 3278- A- 1119 3280- V- 8394 3280- Z - 8398 SA1- 3280- U - 8861 3296- F - 188 3296- W- 1167 3296- Z - 1170 3297- E- 1019 3297- N- 1158 A- 3297- T - 1346 A- 3297- U- 1347 A- 3303- P- 1030 3892- N- 4902 572 580 592A 594A 3920 39520

14 14 7,17 7 7,15 17 4 4 8,19 4 8,18 5 18 6 8,18 5 18 8,18 8,18 4 9 9 9,19 18 9,18 9,18 20 20 4 4 9 6 21 21 21 21 4 21

155D YS32- 6A 155N YS28- 5A 155T YS32- 2A 155T YS32- 6A 16N - 4- 5621X 16N - 4- 6251 16N - 4- 6261 16N - 4- 6271- 1 16N - 4- 6281X 16N - 4- 6291X 16N - 4- 6431- 1X 16N - 4- 7341- 1X 16N YS38- 8A 16T YS28- 13A 16T YS32- 32A 16T YS32- 76 16T YS32- 76A 16T YS32- 86A 170T YS32- 2 170T YS32- 2A 170T YS38- 4A 176N - 4- 531 176N - 4- 541- 1X 176N - 4- 541X 176N YS32- 3A2 176N YS38- 14A 176T YS32- 3A1 176T YS38- 27A 17N - 4- 6321 17N - 4- 6331 17N - 4- 6391X 17N - 4- 6411X 17N - 4- 7181X 17N - 4- 7631- 1X 17N - 4- 7641- 1X 17N YS28- 43A 17N YS32- 100 17N YS32- 100A

29 29 29 29 27 27 27 29 27 27 29 29 27 29 29 29 29 29 29 29 29 27 29 27 27 27 29 29 27 27 27 27 27 29 29 27 27 27

A1- 3235- K- 2169 A2- 3235- K- 2169 A2- 3235- L- 2170

15 17 7,14

21 21 21

17N YS32- 99 17N YS32- 99A 17T YS28- 57A

27 27 29

39590 47620 47686

55

NUMERICAL PARTS LISTING STING PART NUMBER

PAGE

PART NUMBER

PAGE

KIT 2321

40

KIT 2834

47

KIT KIT KIT KIT KIT

2322 2389 2396 2405 2413

40 41 41 41 41

KIT KIT KIT KIT KIT

2835 4007 4284 4345 4350

47 47 48 48 48

KIT KIT KIT KIT KIT

2420 2429 2431 2445 2446

42 42 42 42 42

KIT KIT KIT KIT KIT

4356 4385 4390 4395 4396

48 48 49 49 49

KIT KIT KIT KIT KIT KIT KIT KIT KIT KIT KIT KIT KIT KIT KIT KIT KIT KIT KIT KIT KIT KIT KIT KIT KIT KIT KIT KIT KIT KIT KIT KIT KIT KIT KIT KIT KIT KIT

2482 2488 2511 2512 2522 2541 2636 2637 2638 2647 2648 2662 2664 2665 2668 2686 2691 2696 2703 2704 2705 2706 2709 2730 2743 2747 2750 2751 2752 2753 2754 2755 2756 2758 2759 2760 2761 2819

43 43 43 43 43 43 43 43 43 44 44 44 44 44 44 44 44 45 45 45 45 45 45 45 45 45 46 46 46 46 46 46 46 46 47 47 47 47

KIT 4400 KIT 4406 KIT 4455 KIT 4461 KIT 4766 KIT RD 20140N L KIT RD 20145D L KIT RD 20145N L KIT RR 22145 1873 KIT RS145 1500 KIT RS145 1547 KIT RS145 1676 KIT RS17140 LM- 104949 LM- 603011 LM- 603049 M804010 M804049 MN- 312- 1 MPS 3344 145 MPS 3345 145 MS- 206060- 1 MS- 208016- 1 MS- 208020- 1 MS- 208045- 1 MS- 210016- 1 MS- 210020- 1 MS- 210030- 1 MS210045A- 1 MS- 212045- 1 MS- 220120- 1 MWA- 506 MWA- 508 N- 110- 1 P- 28- S P- 212 RV- 71016 S- 258- 2

49 50 50 50 50 38 38 38 38 38 38 39 39 20 20 20 11 11 4 50 51 5 4 18 9 8 , 19 6 6 4 4 , 11 8 , 13 5, 9 19 21 21 21 8 , 14 21

KIT 2824 KIT 2825 KIT 2833

47 47 47

S- 21016- 2 S- 21020A- 2

21 21

56

PART NUMBER

PAGE

NOTES

57

NOTES

58

NOTES

59

ARVINMERITOR AFTERMARKET PARTS WARRANTY We warrant all new parts for one year from date of shipment to the buyer against defective material or workmanship (but not against damage caused by accident, abuse or improper installation, maintenance or repair) when such parts are used on vehicles the specifications of which have been approved by our Engineering Department. As the exclusive remedy under this warranty, we will, at our option, repair or replace such parts free of charge, or take back the nonconforming parts and refund the monies paid by buyer for such parts, if found on examination by us to be nonconforming and if any necessary return charges are prepaid.

If it is necessary to return any parts under this warranty, buyer agrees not to make any deduction on account thereof from remittances on current accounts while claims are in the process of disposition. Any expense incurred without our consent for repairs or replacement will not be allowed. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS, IMPLIED OR STATUTORY, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FITNESS FOR PARTICULAR PURPOSE. PURPOSE. IN NO EVENT SHALL SELLER BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE.

Only genuine ArvinMeritor replacement parts are covered by this aftermarket parts warranty.

60

Diff Parts Rt40-145

Recommend Documents