CENTUM CS3000 R3 ENGINEERING COURSE
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineer Engineering ing Training Training Course “
CENTUM CS3000 ENGINEERING COURSE OBJECTIVE
: This course enable participants to perform generation of CS3000 regulatory control function, sequence control functions, Human Interface station display and graphic function.
DURATION
: 5 days
PARTICIPANTS : For engineers involved in software generation or modification on the CS 3000 system.
PREREQUISITE : Participants should have attended CS 3000 Fundamental course and have some fundamental knowledge of computer operation.
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineer Engineering ing Training Training Course “
1
System Configuration
Day 1
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineer Engineering ing Training Training Course “
Field Control Station Human Interface Station Ethernet
Eng
Vnet/VnetIP
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineer Engineering ing Training Training Course “
2
CS3000 CS3000 CS30 00System SystemConfiguration Configurat Configu ration ion--Overview Overvi Ove rview ew ETHERNET
HIS
Vnet
Field Control Station
FFCS
KFCS
LFCS
PFCS
Field Network Input/Output
Foundation Fieldbus Fieldbus
HART “Professional Instrument Engineer Training Program ”
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“ CS3000 Engineer Engineering ing Training Training Course “
CS3000 CS3000 CS300 0System System Syste mConfiguration Configura Confi guration tion-- Overview Overview Over view CS3000 KFCS/KFCS2
LFCS/LFCS2 Integrated std. Field control station
PFCS
FFCS
Compact Field control station
RIO series
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
FIO series
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineer Engineering ing Training Training Course “
3
System configuration LFCS CENTUM 3000 FOR LFCS : RIO
SYSTEM MAXIMUM CAPACITY Max. of HIS-monitored tags :100000 Max. of stations
: 256
Max. of domains
: 16
Max. of station per domain : 64(all), 16 HIS
Twisted pair cable or Optical Fiber
Single/Duplex
2 MB/S , Polling
750 m / 20 km ( Twisted pair/Fiber)
%Z011101 -Node 1-8
Channel 1-32
Nest 1-5
MAX. length
Slot 1-4
MAX. 1280 AI/O & 4096 DI/O
MAX. 8 NIUs
5 IOUs / NIU “Professional Instrument Engineer Training Program ”
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“ CS3000 Engineer Engineering ing Training Training Course “
System SystemConfiguration Configuration LFCS LFCS Ethernet HIS0164
HIS0163 HIS0163
HIS0162
Eng V net
FCS0101
FCS0102
FCS0103
NODE RIO
MAX. NODE 8 PER FCS
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineer Engineering ing Training Training Course “
4
Field Control Unit(FCU) Overview for LFCS
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineer Engineering ing Training Training Course “
Field control unit Picture : LFCS RIO Bus Master Interface Card (RB301)
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineer Engineering ing Training Training Course “
5
Remote I/O (RIO)
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
Remote I/O (RIO)
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
6
Nodes Picture of LFCS
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
Nodes Picture of LFCS
RIO Bus Slave Interface card ( RB401 )
Node Interface Unit ( NIU )
Power supply
Nest For I/O
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
7
System SystemConfiguration Configuration PFCS PFCS Ethernet HIS0164
HIS0163
HIS0162
Eng
V net
FCS0102
FCS0101
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
FCS Types for FIO NODE
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
8
System configuration KFCS CENTUM 3000 FOR KFCS : FIO
SYSTEM MAXIMUM CAPACITY Max. of HIS-monitored tags :100000 Max. of stations
: 256
Max. of domains
: 16
ESB bus: Length 10 m. or less(YCB301)
Speed 128 megabits pre second
Max. of station per domain : 64(all), 16 HIS
Redundancy : Available ER bus: Length 185m(Coaxial cable) or
Local Node
less(YCB141),
No. Node Unit Connectable %Z011101 --
Local Node Unit: Max. 10/FCU
500m(Coaxial cable) or
Channel 1-64
Node 1-10
Remote Node Unit: Max. 8/FCU
less(YCB311)
Slot 1-8
When both Local and Remote Node
Speed 10 megabits pre second
Port 1-4
Redundancy : Available
Unit used: Max. 10/FCU
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
System System Configuration Configuration KFCS KFCS Ethernet HIS0164
HIS0163
HIS0162
Eng V net
FCS0101
FCS0102
FCS0103
MAX. LOCAL NODE 10 ESB BUS
MAX.REMOTE NODE 8
ESB BUS
ESB BUS
LOCAL NODE REMOTE NODE
ER BUS
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
9
Node in FCS Architecture : KFCS
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
System System Configuration Configuration FFCS FFCS Ethernet HIS0164
HIS0163
HIS0162
Eng
V net
FCS0101
FCS0102
FCS0103
MAX. LOCAL NODE 3 ESB BUS
MAX.REMOTE NODE
ESB BUS
ESB BUS
LOCAL NODE REMOTE NODE
ER BUS
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
10
Nodes Picture of FFCS IO Modules
CPU Card
Power Supply Unit V net coupler unit Bus 1
V net coupler unit Bus 2
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
Node in FFCS Architecture
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
11
System -L SystemConfiguration Configuration FFCS FFCS-L HIS0163
HIS0164
HIS0162
Eng
V net
FCS0101
FCS0102
FCS0103
ESB BUS LOCAL NODE
MAX. LOCAL NODE 3 MAX.REMOTE NODE
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
System -L SystemConfiguration Configuration FFCS FFCS-L Vnet/IP
8 FIO slots
EC401 ESB bus coupler (Note) Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
CP451 CPU module
Power supply unit
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
12
Control Bus Interface Card (VI701) SW 1 : Set Domain
SW 2 : Set Station
VI701 Specification Interface: PCI/PCI-X 32bits 3.3V/5.0V Mac Address: Vnet/IP bus1 Vnet/IP bus2 Vnet/IP on TCP/IP Ethernet (for Open)
BNC connector BUS 2
BNC connector BUS 1
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
Control Bus Interface Card (VI701)
L2SW (Switching Hub)
CAT5E UTP Cables Fiber Optics Cables
Note : L3SW* (for multi domain) Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
13
Actual System Configuration HIS2
HIS1
HIS3
Eng
L2SW
FFCSFFCS-L
FFCSFFCS-L
Vnet/IP bus1
FFCSFFCS-L
Vnet/IP bus2
“Professional Instrument Engineer Training Program ”
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“ CS3000 Engineering Training Course “
Actual System Configuration Domain 2
Domain 1 HIS1
HIS2
HIS3
HIS4
HIS5
Eng
L3SW
L2SW
L2SW
FFCSFFCS-L
FFCSFFCS-L
FFCSFFCS-L Vnet/IP bus1
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
FFCSFFCS-L
FFCSFFCS-L
FFCSFFCS-L
Vnet/IP bus2 “Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
14
Fieldnetwork I/O (FIO NODE)
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
Fieldnetwork I/O (FIO)
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
15
Local Node in FCS Architecture : KFCS
1 2 3 4 5 6 7 8
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
Local Node in FCS Architecture : KFCS
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
16
Remote Node in FCS Architecture : KFCS
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
Connection of KFCS
ESB bus interface master card ( SB301 )
Power supply (specify with Suffix Code) Voltage : 100-120 Vac, Frequency : 50/60 Hz Voltage : 220-240 Vac, Frequency : 50/60 Hz Voltage : 24 Vdc
Processor Card
V net coupler unit Bus 1
V net coupler unit Bus 2
ESB bus 1 ESB bus 2
Battery Back-up for main Memory : Max. 72 hours Battery Recharge Time : Min. 48 hours
Fan units
ESB bus cable ( YCB301 )
ESB bus interface slave card ( SB401 )
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
17
ESB Bus Interface Slave Module ( SB401 ) Connector unit with terminator for ESB Bus
Connector unit for ESB Bus
Setting node addresses Bit 1 ------- Node address parity (1 bit, odd parity ) Bit 2 ------- Fixed to 0 Bit 3 Bit 4 Node address (4 bit ) Bit 5 Bit 6 Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
ER Bus Interface Master Module ( EB401 )
ER bus cable connector ( CN1 )
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
18
ER Bus Interface Slave Module ( EB501 )
Connector for maintenance IP Bus address setting ER Bus cable connector
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
V net Cable
Using VLnet interface card Cable : Thin coax. cable with BNC connector (10Base2 comp.)
V net - 10Base5 cable up to 500 m. - 10Base2 cable up to 185 m. Communication speed : 10Mbps High reliable token passing communication
Std. max. length : (10Base2) + 0.4(10Base5) < 185 m Max. length : 20 km with optical repeater 1.6 km with coax. repeater
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
19
V net Cable Vnet Control Network Token-passing, Deterministic, High speed (10 MBPs) Bus topology, coaxial or fiber optic cable Type of communication transmitted: read/write of FCS data broadcast of FCS messages broadcast of HIS messages time equalization communication of operating status display online maintenance
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
Medium:
Coaxial Cable
Data Rate:
10 Mbps
Segment Length:
max. 185m./500m
Termination:
50 ohm, 1 Watt
Connection:
BNC
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
Ethernet
•
Hub Link 10/100 Mbps or 1 Gbps
•
Network Cable (RJ-45connector)
•
Network Interface Card
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
20
Ethernet Ethernet Information Network Bus contention method, Non-Deterministic High speed (10/100 MBPs) Star topology, UTP or fiber-optic Type of communication transmitted: equalization communication acquisition of status display data other station trend download, IOM download, tuning parameter save recipe equalization client-server processing open data interface
Medium:
4-Pair Category 5 Cable
Data Rate:
10 Mbps (10BASE-T) 100 Mbps (100BASE-TX)
Segment Length:
max. 100 m. (point-to-point)
Connection:
RJ-45 Connector
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
Control Bus Interface Card (VF701) SW 1 : Set Domain
SW 2 : Set Station
BNC connector BUS 1
BNC connector BUS 2
Terminator Vnet Cable
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
21
Domain & Station on system Station 1 Station 64 Station 2
Station 63
DOMAIN 1
Station 3
Total 64 Station
Station 62
Station 4 Station 61
HIS Max. 16 Station
Domain Max. 16 Domain
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
FCS Max. 48 Station
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
Max. no. tags
8,000
100,000
Max. no. of stations
24
256
Max. no. of domains
1
16
Max. no. of stations per domain
HIS(8) FCS(16)
HIS(16)
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
22
SOFTWARE INSTALLATION
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
Requirement for installation Items Required for the Installation following items should be ready for use: - CS3000 software CD-ROM - CS3000 electronic document CD-ROM - CS3000 key-coded floppy disk (1 or more) Windows Service packs and CS3000 Releases Windows XP
Windows 2000
The relations between Windows and CENTUM 3000
SP1
SP2
SP3
SP4
SP1
R3.01
Yes
Yes
Yes
Yes(*1)
NO
NO
SP2
R3.02
Yes
Yes
Yes
Yes(*1)
NO
NO
R3.03
NO
NO
Yes
Yes(*1)
Yes
NO
R3.04
NO
NO
NO
Yes(*1)
Yes
NO
R3.05
NO
NO
NO
Yes
Yes
Yes(*1)
R3.06
NO
NO
NO
Yes
Yes
Yes(*1)
R3.07
NO
NO
NO
Yes
Yes
Yes(*1)
R3.08
NO
NO
NO
Yes
Yes
Yes(*1)
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
Yes : Compatible NO : I ncompatible *1 : Recommended
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
23
Software Installation
Installation of window
Installation of Service Pack. (This step is not required for console type HIS)
Windows setup -Network adapter addition -Pinter addition
Installation of the CS3000 software and the electronic manual.
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
Windows Set up
Computer name ( Station Name ) A computer name is the name used to identify each computer on the Windows Network
EXAMPLE : HIS0164 ( HISddss : “dd” is the domain and “ss” is the station
WORKGROUP Right click My computer/ Properties / Computer Name / Change
! RESTART
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
24
Computer Name and Workgroup setting
• Right click My computer and click properties.
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
Computer Name and Workgroup setting
• When Setting on HIS0164 Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
25
Setting Network Installing Control Bus Drivers Only one VF701 card can be installed and you must be installed by CD only.
Installing Ethernet Drivers The plug & play
PROCEDURE OF INSTALLNG CONTROL BUS DRIVER - Start windows, Log on with Administrator - Load CD-ROM of CS3000 SOFTWARE CD Part ( System software LHSK M02 ) :\ CENTUM \COMDRV \ Setup.exe
- Rename Local Area Connection 1. Ethernet 2. Vnet
- Setting IP Address Ethernet => Ethernet Icon \ Properties \Internet ProtocalTCP/IP \ Properties IP Address
: 172.17.< domain >.< station >
Subnet mask : 255.255.0.0 Vnet
=> Vnet Icon \ Properties \ Internet Protocal TCP/IP \ Properties IP Address
: 172.16.< domain >.< station >
Subnet mask : 255.255.0.0
! RESTART
! CONFIRM THE ADDED DRIVER
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
Setting Network
• Right click My Network Places and click properties.
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
26
Ethernet Setting
• Right click Ethernet and click properties.
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
Ethernet Setting
• Check IP address and Subnet mark of Ethernet Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
27
Vnet Setting
• Right click Vnet and click properties.
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
Vnet Setting
• Check IP address and Subnet mark of Vnet Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
28
Advance Setting
• Select Advance on menu bar and click Advance Settings
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
Advance Setting
• In order to give Ethernet adapter a higher priority than Vnet • Use the arrowhead buttons on the right side to move the adapter. Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
29
Vnet /IP Setting Network Procedure Of Vnet/IP Vnet/IP Setting Network Installation VnetIP adapter
Installation VnetIPOpen (BUS2) adapter
Installation VnetIPOpen (BUS1) adapter
Address Setting of VnetIP VnetIPOpen (BUS2) VnetIPOpen (BUS1)
! RESTART COMPUTER
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
Vnet /IP Setting Network Installation VnetIP adapter Load CD-ROM of CS3000 SOFTWARE CD Part ( System software LHSK M02 ) :\ CENTUM\COMDRV\Setup.exe
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
30
Vnet /IP Setting Network Installation VnetIPOpen(BUS2) adapter Load CD-ROM of CS3000 SOFTWARE Software Medium\Centum\COMDRVOPN\setup.
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
Vnet /IP Setting Network Installation VnetIPOpen(BUS1) adapter
• Right Right click My Computer and click Manage Manage
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
31
Vnet /IP Setting Network Installation VnetIPOpen(BUS1) adapter
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
Vnet /IP Setting Network Address Setting of VnetIP VnetIP
IP ADDRESS : 172.16. dd.ss SUBNET MARK : 255.255.0.0 Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
32
Vnet /IP Setting Network Address Setting of VnetIPOpen(Bus2)
IP ADDRESS : 192.168.128+dd.129+ss SUBNET MARK : 255.255.255.0 Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
Vnet /IP Setting Network Address Setting of VnetIPOpen(Bus1)
IP ADDRESS : 192.168.dd.ss SUBNET MARK : 255.255.255.0 Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
33
System Software Installation
PROCEDURE OF INSTALLNG SOFTWARE - Start windows, Log on with Administrator - Insert the KEY-CODE Floppy disk into drive A: - Load CD-ROM of CS3000 SOFTWARE CD Part ( System software LHSK M02 ) :\ CENTUM \ Setup
- Insert Next CD => Electronic Instruction Manual ( CD LHSK03 )
! RESTART COMPUTER
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
System Software Installation
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
34
System Software Installation
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
System Software Installation
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
35
System Software Installation
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
System Software Installation
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
36
System Software Installation
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
System Software Installation
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
37
System Software Installation
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
System Software Installation
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
38
System Software Installation
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
System Software Installation
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
39
System Software Installation
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
System Software Installation
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
40
System Software Installation
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
System Software Installation
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
41
System Software Installation
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
System Software Installation
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
42
System Software Installation
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
System Software Installation
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
43
System Software Installation
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
PROCEDURE OF INSTALLATION
- Start windows, Log on with Administrator - Load CD-ROM of Electronic Instruction Manual ( CD LHSK03 )
- Acrobat Reader CD Part ( LHSK M03 ) :\ CENTUM \ REDER \ ENGLISH \ ar505enu.exe
- Finder CD Part ( LHSK M03 ) :\ CENTUM \ REDER \ ENGLISH \ FINDER.exe
! RESTART
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
44
AUTOMATIC STARTING This is not required if the system is not connected to CONTROL BUS (VF701)
- Start windows, Log on with Administrator
Select : [ YOKOGAWA CENTUM from start menu ] -[ HIS Utility ]
! RESTART
- Start windows, Log on CENTUM
Select : [ YOKOGAWA CENTUM from start menu ]- [ HIS Utility ]
! Log off and Log on CENTUM again
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
Uninstallation
Deleting control bus driver (Vnet Driver)
- Start windows, Log on with Administrator
- Load CD-ROM of CS3000 SOFTWARE CD Part ( System software LHSK M02 ) :\ CENTUM \ COMDRV \ Uninstall.exe
! RESTART
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
45
Uninstallation software
Start windows, Log on with Administrator
-Stop services: :\ Control panel \ Administrative tool \ Service => Stop file BK....(All file BK..)
-Uninstall software -:\ Folder CS3000 \ Uninstall.bat
! RESTART COMPUTER
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
Uninstallation software Stop services:\ Control panel \ Administrative tool \ Service => Stop file BK....(All file BK..)
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
46
Uninstallation software
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
Uninstallation software Uninstall software : \ Folder CS3000 \ Uninstall.bat
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
47
Uninstallation software
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
Uninstallation software
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
48
Uninstallation software
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
Uninstallation software
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
49
ENGINEERING WORK FLOW Start Start system view
Step 1 : Project Creation - Creation necessary folders for target system
Step 2 : Defining FCS Control Function -Define FCS station configuration -Define process I/O modules -Define software I/O -Define massages -Define regulatory control function -Define sequence control function
Step 3 : Define Project Common Items -Define security function -Define operation marks
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
Step 4 : Defining HIS Function -Define HIS station configuration -Define HIS constants -Define function key assignment -Define scheduler function -Define trend recording function -Define sequence message -Define user-defined windows -Define help dialog
Step 5 : Conducting Test Function - Run a virtual test function
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
PROJECT CREATION Type of project and Project Attribute Utility Function are explained. Three are three type of projects.
Default Project Current Project User-Defined Project
1.
Default Project :
The first time engineering work for a project preformed on the default pro ject. This project is download to the FCS and HIS. This project is downloadable off-line to the FCS of the target system.
2.
Current Project :
When any one of the FCS created in default project is successfully download, the attribute of project change from default project to a current project. Online engineering become enabled.Only one current or default project can be created on the target system.
3.
Use r- De fined Proj ect :
A project copied either from the default pro ject or current project is referred to as a User-Defined Project. This project can not download to FCS and HIS of the target system.This project is used when eng ineering using virtual tests or making a backup copy of the current project.
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
50
CREATING A DEFAULT PROJECT This section will show the steps of creating a default Project when System View is start up for the first time.
1. Create new PROJECT
2. Create new FCS
3. Create new HIS
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
1. Create new project Start System View
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
51
Start Default Project Creation When the system view could not identify an existing current or default project, So system view will be request one Default project. When dialogue box will appear. Click [Yes]
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
Project outline The project information area allows the project creator to enter arbitrary characters.
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
52
Project Property Project Name : An alphanumeric character string less than 8 characters. Position : C:\CS3000\eng\BKProject Project Comment : 32 alphanumeric characters.
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
2. Create an FCS folder
In this step, a folder for the first FCS data base files is create. The item are define on the dialog box. Assign correct station type and station address as they cannot be changed upon confirmation.
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
53
Database Types
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
3. Create an HIS folder
In this step, a folder for the first HIS data base files is create. The item are define on the dialog box. Assign correct station type and station address as they cannot be changed upon confirmation.
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
54
Project Folders Additional FCS,HIS or other station can be created under the top pull down menu [File][Create New][Station Type]
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
Project Attribute Utility The Project Attribute Change Utility is an engineering tool that makes the project creation, property modification easy. Before running the Project Attribute Change Utility,check that System View is not running.
Instrumentation & Automation Education Center ( IAEC) Yokogawa (Thailand) Ltd.
“Professional Instrument Engineer Training Program ”
“ CS3000 Engineering Training Course “
55