The bot simulates mouse and keyboard inside tibia window, in order to do this it will need to know the positions ( coordinates on screen ) of some things, this information is stored in form of a #tag, some tags are automatically updated by bot and some will need to be manually added.
This is very important, since all mouse simulation is based on this.
The process is very simples, first you will maximize tibia window and keep it in that way, then you will move your mouse cursor to the point you want to register as a tag and then you will press the Insert button on your keyboard, keyboard, a new window will apears and you will need to put a name for that tag in order to save it, do so and press OK.
#putat = This tag is where cavebot will drag the looted items to, you can put it on your standard backpack slot on your equipaments or anywhere else, even on the ground under your character or on the arrow slot if you have a bag or backpack in there.
#FirstBpSlot = This will show bot where the first slot of iventary is, so it will be able to make some calculations necessary to find loot positions.
Through hotkeys you can execute commands in game by pressing a key, and through commands you can shot runes automatically using an aimbot command such $shot #rune. In order to a add a hotkey you need to write the command, select which key you will use for it and then check the checkbox. Take care about writing the command correctly, or it may not works or even crash the bot.
$lclick #tag = Left mouse button click on #tag position $rclick #tag = Right mouse button click on #tag position $wait x = Will wait x milliseconds before doing next action $drag #from #to = Drag mouse from position #from to position #to. $shot #rune = Aimbot rune on position #rune at target $shotmw #mw = Will shot magic wall in front of target $Waypoint = It will add a waypoint $key "nome" = It will press a key or hotkey, example: $key f1, $key enter.
Others:
$gotoline $gotolabel
$pausescript $resumescript $pausecavebot $resumecavebot $playsound
This is a very simple "script" tab, it will be more advanced when i finish the Advanced Lua script tab. I will not take long time explaning this tab since it is intuitive, but i'll explain somethings.
There is no "If" when you put a variable it will automatically contains the if syntax, example: $hp < 200 $key f1 $wait 2000
It means that if your hp is less than 200 the bot will press the hotkey f1 in tibia and then wait 2 seconds before going to next script line.
This is very simple, but if you are skilled enough you can do all sort of things using this tab, even almost fully automated cavebot scripts ( which goes to bank deposit money, etc. ) If you are new to this kind of stuff you can facilitate your life using the line builder tool and reading some script examples that comes with bot.
Select the desired options and then press "Active cavebot".
Take in consideration that until 1.3.5 patch, the patch i'm writing this tutorial, it was not possible to loot itens that are not in the first four slots of the corpose, this will be fixed in future updates.
Any clues about this just contact me.
Maximize tibia window and then press "Home" button on your keyboard or press "Refresh" on bot's Main Tab. Also add again all the tags you are using, like #runes and #putat / #firstbpslot by the process described on tutorial.
Add again #putat and #firstbpslot as indicated in tutorial. Also, try closing all your backpacks and opening they again before starting cavebot, this will reset the backpack number. And remember to set how many backpacks you have open on “SelfBps” textbox before starting cavebot.
--------
Any questions just contact me: Whatsapp: +55 61 9866-5197 E-mail:
[email protected]
