Crossover & Pup Joint

CROSSOVER / PUP JOINT  Where required, crossovers are used to adapt the standard 3-½” bypass system thread to the production tubing by way of the coupling. The item can be configured as follows: 1. For 3-1 ⁄ 2” NVAM production tubing: single pup joint connects bypass to upper coupling 2. For other 3-1 ⁄ 2” production tubing: crossover connects bypass to upper coupling 3. Where tubing size differs from the 3-1 ⁄ 2” bypass system standard, an additional crossover is provided to connect the pup joint to the production tubing.

DESCRIPTION Crossover

Pup Joint

 C  A R  B   O  N R  E   S   .F  T  E   N E   o L   .

1   3   C  H R  R  E   O  .F   M N E   o  .

T   O P  T  H R  E  A D

B  T   O H R  T  T  E   O A  M D

11450001201

11450001401

3-½” 9.3 lb-ft EUE Pin

11450016201

11450016401

11450015201

10290001201

L  E   N  M  G A T  K  H E   (   f    U  t    )   P 

D R  I   F  T   (   i   n  )  

D I   I   A  N  .  S  I    (   i   n D  )   E 

D  O I   A  U T   .  S  I    (   i   n D  )   E 

3-½” 9.2lb-ft NVAM Pin

5.000

2.867

2.992

3.750

4-½” 12.75lb-ft EUE Pin

3-½” 9.3 lb-ft EUE Pin

1.500

2.867

2.992

4.750

11450015401

4-½” 12.6lb-ft NVAM Pin

3-½” 9.2lb-ft NVAM Pin

1.500

3.833

2.992

4.500

10290001401

3-½” 9.2lb-ft NVAM Pin

3-½” 9.2lb-ft NVAM Pin

5.000

2.867

2.992

3.500

Top Connection Top Connection

Inside Diameter Outside Diameter Inside Diameter Bottom Connection Outside Diameter

Make Up Length

Bottom Connection

Make Up Length

ZENITH

ZKG-0605-005_C — April 2008 — © Zenith — zenithoilfield.com  Zenith Oilfield Technology patents pending & protected worldwide