1st of August 2011 KAMRAN HAIDER TUNIO
V5A, L3.1.5 Universiti Teknologi PETRONAS Bandar Seri Iskandar, 31750 Tronoh • Perak • Malaysia Cell: (+60) 149-050-509
[email protected] Human Resources Department, Dear Sir/Madam,
Application for the post of Trainee Drilling and Production Engineer/ Petroleum Engineer.
With due respect I want to state that currently, I am in the final semester of my Bachelor Degree
program in Petroleum Engineering, majoring in Drilling and Production Operations at Universiti Teknologi PETRONAS, Malaysia which will end on 15th of September 2011.
When PETRONAS was operating in Pakistan they had offered scholarships for undergraduate studies in UTP, Malaysia. I was among the five (5) students selected for this scholarship through competitive examination. Currently, PETRONAS is not operating any fields in Pakistan and has left the country in September 2010. Although, PETRONAS is not working anymore in Pakistan but it is still financing my studies and has released me from the Service Bond Agreement.
My 8 months of industrial internship training at PETRONAS Carigali Sdn. Bhd – Specialized Studies Section, Production Technology Dept has provided me with invaluable exposure to the engineering experience. Throughout the industrial training I have assisted the engineers in Feasibility study of Tight Oligocene Reservoir in Ruby Field, Vietnam. Initiatively, developed a new standard manual for Water Injection in PCSB, proactively participated in sand control management of various fields in PCSB and helped monitor and track record of sand management in Samarang, Samarang Kecil, Alab, West Lutong, Erb West and Tembungo fields. I actively participated in numerous technology update seminars organized by service companies like
Schlumberger, Halliburton, Baker Hughes, Weatherford etc for PETRONAS staff. Through these seminars I have gained valuable knowledge of latest technology being employed in Oil and Gas Industry. I am confident that my combination of practical work experience and solid education experience has prepared me for an immediate contribution to your organization.
Recently, I have completed a Final Year Project. This individual project is entitled ‘Foamed Cement with additives for Zonal Isolation in Coalbed Methane (CBM) Wells’. The project involved laboratory experiments utilizing cementing equipments mainly for compressive strength, fluid loss, thickening time, porosity/permeability of foamed oil well cement with additives.
Also, my keen participation in academic and extracurricular activities has sharpened my event management skill, leadership skill, communication skill, team work and also the ability to work independently with minimal supervision.
I feel certain that my commitment to excellence, coupled with experiences that I had gained during my varsity and internship stint will help me contribute for the success of your esteemed company. Should you agree after reviewing the enclosed resume and testimonial, I would be available to attend an interview at your convenience and look forward to favorable hearing from you soon. Thank you very much for your kind attention.
Yours Sincerely, Kamran Haider Tunio Enc: 1. Resume
PERSONAL DETAILS
Name:
Kamran Haider Tunio
Father’s Name:
Dr. Aijaz Ali Tunio
Date of Birth:
12th August 1988
Place of Birth:
Larkana
Nationality:
Pakistan
Passport No. Temporary/Current
V5A, L3.1.5, Universiti Teknologi PETRONAS,
Address:
Bandar Seri Iskandar, 31750, Tronoh, Perak Malaysia
Permanent Address:
New Karma Bagh, Ward-B, Opposite Bahar Shah Pir, Larkana, Pakistan.
Malaysian Cell:
+60149050509
Pakistan Cell:
+923023486106
Email:
[email protected]
OBJECTIVE
Desire a Challenging Position as Petroleum Engineer in a Major Corporation A highly talented and result- oriented Petroleum Engineer with a aim to Broaden and enhance my skills and ideas related to Drilling and Production Engineering. Obtain an entry position in an organization which offers the opportunity to utilize and expend my technical and managerial skills.
EDUCATIONAL BACKGROUND
Year
Educational Institution
2007 - Present
UNIVERSITI TEKNOLOGI PETRONAS, MALAYSIA Bachelor (Hons) of PETROLEUM ENGINEERING Currently in 4th year 2nd semester of 4 years Engineering Program Expected Graduation : September 2011 GPA: 3.69 (Dean’s List Award)
2005 - 2006
GOVERNMENT DEGREE COLLEGE, LARKANA, PAKISTAN Higher Secondary Certificate (H.S.C) Part – II (Class XII) Overall Standing : A GOVERNMENT DEGREE COLLEGE, LARKANA, PAKISTAN Higher Secondary Certificate (H.S.C) Part – I (Class XI) Overall Standing : A
2004 - 2005
2003 - 2004
2002 - 2003
1992-2002
PUBLIC SCHOOL LARKANA, PAKISTAN Secondary School Certificate (S.S.C) Part – II (Class X) Over Standing : A-1 PUBLIC SCHOOL LARKANA, PAKISTAN Secondary School Certificate (S.S.C) Part – I (Class IX) Over Standing : A-1 PUBLIC SCHOOL LARKANA, PAKISTAN From KG - I and KG – II to Class VIII Always secured 1st position in class.
PERSONAL TRAITS AND SKILLS
I am an enthusiastic and confident about what ever task I undertake. I put my passion and dedication in everything I do. Being an optimistic, creative and responsible person I am most of the time successful in my undertakings. With my charismatic qualities I can inspire, lead and work within a team without any problems. I am well disciplined and like to do things in an orderly and purposeful manner. I am a tolerant person and remain calm and steadfast in uncertain situations to the main purpose. I always strive for the best and am very much committed to excellence. I am a Knowledge seeker willing to learn new things. I love taking responsibility. My friendliness and open mindedness help me develop long lasting and healthy relationships with the people I work. Teamwork, well-managed organization structure, supportive and challenging working environment are part of my interests. My other qualities and traits are: Enthusiastic and highly motivated Deal effectively with change and uncertainty Ability to lead and influence others
Ability to work in team as well as independently Keen to drive own development and learning Proficient time and self-management Good technical writing and communication skills Interpersonal and intrapersonal ability Give full commitment and co-operation ENGINEERING COURSES TAKEN
Year
Educational Institution
Specialization Courses
• Advanced Drilling Engineering • Petroleum Production Optimization • Well Stimulation Techniques
Core Courses
Fundamentals of Petroleum Engineering • Introduction to Oil and Gas Industry • Introduction to Petroleum Geoscience • Introduction to Petroleum Geoscience • Statics and Dynamics • Reservoir Rock and Fluid Properties • Reservoir Geoscience • Principles of Reservoir Engineering • Reservoir Modeling and Simulation • Drilling Engineering • Facilities Engineering • Well Logging and Formation Evaluation • Well Completion and Production • Well Test Analysis • Petroleum Economics • Gas Field Engineering • Field Development Project. Final Year Project. Industrial Internship Differential Equation • Vector Calculus • Probability and Statistics • Computational Methods • Engineering Economics and Entrepreneurship • Health, Safety and Environment • Introduction to Material Science • Mechanical Engineering Thermodynamics • Fluid Mechanics • Structured Programming and Database System • Engineers in Society • Engineering Team Project
General Engineering Subjects
General Studies Subjects
Co-Curriculum
Professional Communications skills • Introduction to Management • Cultural Anthropology • Islamic Studies • Malaysian Studies • Bahasa kebangsaan Modern Music • Entrepreneurship
COMPUTER SOFTWARE SKILLS
Wellflo • Eclipse
Engineering Software
C++ • Visual Basic
Programming language Operating System
Microsoft Office
Windows 98 • Windows Millennium • Windows XP • Windows Vista • Windows 7 • Linux Word • Excel • Access • Publisher • PowerPoint • FrontPage • OneNote
Web Page Designing
Flash • HTML • Adobe Photoshop
Others
Macromedia Dreamweaver
PROFESSIONAL EXPERIENCE
Industrial Internship at PETRONAS CARIGALI SDN BHD
I was stationed at PETRONAS Twin Towers, KLCC and was assigned to the Specialized Studies section headed by En Tatmimiddin AlHasani B Mohamed under Production Technology Dept. headed by Mr. Zamanuri Bin Ibrahim upon reporting for duty. During 32 weeks of Industrial Internship I contributed in the following projects: Project Establishing Standard Practice Manual for
Contributions/Activities I. II.
Water Injection in PCSB:
III. IV.
Feasibility study of Tight Oligocene Reservoir in Ruby Field, Vietnam
I. II. III.
Collect and analyze data regarding Water Injection from all PCSB fields(Malong, Dulang, Sumandak etc) Do Research and prepare a report on Sea Water and Produced Water Treatment for injection purposes Prepare a report on typical water analysis, basis of overall design and Well design for Water Injection Evaluate Water Injection Performance at Sumandak Main field Conduct Research on Radial Drilling and Horizontal Well and evaluate the said technologies for implementation in Ruby Field - Vietnam. Establish screening criteria for the implementation of Radial Drilling and Horizontal Well in Ruby Field - Vietnam Track record of Radial Drilling and Horizontal Well technologies used in similar fields
Sand control Database:
L-Drive Management
I. II. III. IV. I.
and PTECH ICOP: II.
International Petroleum Industry Multimedia System (IPIMS) Others
III. IV. V. I.
I. II. III.
Track record of sand control completions in PCSB(Sand Management in Samarang, Samarang Kecil, Alab, West Lutong, Erb West, Tembungo) Prepare a complete report on new sand control technology implementation in PCSB Current sand control practices in PCSB Performance evaluation of sand control Re-organize the share point platform L-drive into 9 main sections i.e. Production Enhancement, Well Testing, Well Technology, Specialized Studies, Admin, GM files, COP, PTRC and Miscellaneous. Transfer the files from old folders to new folders under appropriate section Catalogue the files to enable easy retrieval Copy files from L-drive to online sharing platform PTECH ICOP Provide day to day troubleshooting To successfully complete all the Production Technology modules available in IPIMS within 6 months to fully understand the Production Technology concepts.
Artificial lift performance Idle Well Reactivation Hydraulic fracturing
FINAL YEAR PROJECT
Properties of Foamed Cement with Additives for Zonal Isolation in Coal Bed Methane (CBM) Wells - (A Case Study on Mukah Coal Field, Sarawak) Coal bed methane (CBM) generally has lower fracture gradient as compared to conventional oil or gas wells due to weak structures of coal. Therefore, CBM are more vulnerable to downhole problems faced such as lost circulation and formation fracture as the formation cannot withstand the cement densities of averagely above 11 ppg (1320kg/m³). Foam cement when used together with additives offers a versatile and economical means of cementing with low density (5-13 ppg) and high strength per unit volume, The objectives of this project are to determine properties (density, compressive strength, fluid loss, porosity and permeability) of the foamed cement when used with Micro silica and BJ Ultra as additives to be compared and analyzed for their compatibility for the Mukah Coalfield, Sarawak. The project also discussed the characteristics of CBM reservoirs, foamed cement with additives sample preparation methods and data analysis. HPHT Curing Chamber, Compressive Strength Testers, HPHT Filter Press and PoroPerm are some of the equipments that were used for measurement of various properties for this project.
TRAININGS
Microchip Microcontroller Programming Using Core Chart Graphical Assembler, KLCC, Kuala Lumpur:
The training focused on Microchip programming for electrical appliances. PETROSAINS, KLCC, Kuala Lumpur:
The training focused on increasing knowledge of science and science communication skills among participants Leadership Workshop, Bukit Cahaya, Shah Alam:
A program specially organized by DIGI for its student ambassadors to help them develop leadership and team work qualities Soaring The Eagle, Negeri Sembilan:
The program was conducted by PERMATA and focused on time management, financial management, studies management, health management and relationship management. Outward Bound School, Lumut:
This one week program focused on physical fitness and included activities like swimming, jungle trekking, camping, mountain climbing etc. Multimedia Course, UTP, Seri Iskandar:
This course was organized by Medtech Club and focused on the operation of multimedia equipments e.g. digital cameras, computers, editing software etc. Tourism Malaysia Online Course:
This course covers 7 modules focusing on Malaysian history, geography, culture etc. Professional Etiquette and Grooming Workshop, KLCC, Kuala Lumpur:
This course focused on making positive impressions, social and business introductions, professional attire, table manners etc Others:
Self Development: Motivating Yourself to Perform Career Development: Professional Networking Financial Management: Accounting Fundamentals International Business Essentials: The Global Business Environment Digital Photography
EDUCATIONAL TRIPS Field trip to PETRONAS Warehouse KEMAMAN, 2008:
A field trip was organized to PETRONAS Warehouse, Kemaman for the drilling engineering Course. Students gained knowledge of Drilling Equipment during the trip
Geology Field Trip:
A geology field trip was organized for the students around Ipoh area to study the types and origins of various rocks.
Onshore Gas Terminal, Kerteh, 2010:
A visit was organized to OGT, Kerteh by PETRONAS Carigali Sdn Bhd for new hired engineers. I volunteered to join. This gas terminal receives gas and condensate produced by offshore platforms and separates gas, condensate and effluent water accordingly. The effluent water is also treated here prior to discharging. During the visit participants learnt about Amine gas treatment. Terengganu Crude Oil Terminal (TCOT), Kerteh:
The Terengganu Crude Oil Terminal (TCOT) is located near Kerteh on the East Coast of Peninsular Malaysia. The terminal processes crude oil from fields located offshore Peninsular Malaysia for export via crude tankers. During the visit the participants learnt about crude and water treatment process and equipments.
Halliburton Supply Base Kemaman:
A Study trip was organized to the Halliburton Supply Base Kemaman by the PETRONAS Carigali Sdn Bhd. The participants got a opportunity to look at and learn about Completion Equipment and Accessories
Weatherford Supply Base Kemaman:
The participants gained valuable knowledge about Through Tubing Application Equipment
AWARDS AND HONOURS
Best Science Communicator Award by PETROSAINS for showing good scientific knowledge and good communication skills. Dean’s List Award, July 2009 Dean’s List Award, January 2010 Dean’s List Award, July 2010 Dean’s List Award, January 2011 Certificate of Excellence awarded by DIGI Telecommunication Bhd. For showing extraordinary marketing skills. Delivered a lecture on Afghan crisis in 2001 before more than 200 journalists in Press club Larkana, Pakistan that was given wide coverage in newspapers and local TV news channels and as a result was awarded Honorary membership of Press club Larkana, Pakistan. Head of Perfect Students Committee 2003, Public School Larkana. Editor SAHRO – yearly school Magazine of Public School Larkana. Chief Editor The Mirror – monthly student newsletter of Public School Larkana. Successful completion of Computer (Information Technology) course from Board of Intermediate and Secondary Education Larkana, Pakistan. Certificate of Merit on securing 2 nd position in Debate Competition organized by Knowledge Center Larkana, 2001
Certificate of Excellence, Essay writing Competition organized by Daily Dawn newspaper 2003 Certificate of Merit on securing 3rd position in Quiz program 2003 organized by Board of Intermediate and Secondary Education Larkana, Pakistan Certificate of Merit on Securing 1 st position in All Pakistan Debate Competition 2004 organized by ministry of Education DIGI ambassador at Universiti Teknologi PETRONAS since July 2008 to present
EXTRA CURRICULAR ACTIVITIES
UTP Environment and Ecology Club:
Formed UTP Environment and Ecology Club with following objectives: To create awareness in UTP students regarding environmental issues To encourage students to recycle, reuse and reduce the use of environmentally hazardous substances. To help students understand the importance and need of a clean environment Encourage students to Reduce useless consumption of electricity and fuel Encourage students to plant trees. Subsequently was elected as the President of UTP-E&E club from 2008 – 2009 Public Speaking Workshop 2008:
As Project Manager, successfully organized the Public Speaking Workshop to improve the Professional Communication skills in the UTP Students. Engineering Team Project:
As Project Manager, together with the team designed the prototype for Battery Operated Remote Controlled Bag that made it easy to move heavy travelling bags easy. Minggu Aluan Siswa, January 2008 and July 2008:
As head of International Dept. trained and familiarized the university freshmen with university rules and regulations, academic policies, events etc. Special responsibilities included assisting international students in getting the student visa and other related matters. Engineering Design Exhibition October 2008:
As Public Relation Officer, helped the smooth running of the Exhibition. Other responsibilities included contacting exhibitors, assisting in Engineering Design Exhibition Contest, getting sponsorships etc International Students Committee (ISC), 2007- 2008:
Served as Executive Committee (EXCO) for the Public Relations Department in the sole representative committee of international Students in UTP. Responsibilities included organizing events, voicing the concerns of the international students to the management, assisting freshman students in immigration matters etc.
PETROSAINS July 2008, Best Science Communicator Award:
Was selected as one of the few participants for PETROSAINS jointly organized by PETRONAS and Universiti Teknologi PETRONAS to undergo training at PETROSAINS KLCC, Kuala Lumpur. After 20 days of training and strict evaluation I was awarded the BEST SCIENCE COMMUNICATOR award. International Celebration Night (ICN) 2008:
I was selected as head of Public Relations Department by the International Students Committee to help organize the yearly International Celebration Nights in which students from 30 different countries gave cultural Performances Peer Helper Program, 2008:
Served as Executive Committee for Human Resource Management Dept. of Peer Helper Club. R responsibilities included assisting in organizing motivational and counseling Programs for UTP students, providing Peer Help through phone and email, Helping students cope with stress related to studies, etc. DIGI Student Ambassador:
Was chosen as the student ambassador by leading telecommunication company DIGI as student ambassador at UTP. Responsibilities included promoting DIGI products, assisting in organizing road shows in UTP, increasing sales during road shows etc. As a result of extraordinary performance I was awarded a certificate of Excellence by DIGI. UTP Host:
As a UTP host, my responsibilities included giving the tour of UTP to the distinguished guests, describing the efforts taken by UTP to turn it into a world class Research University, Laboratories facilities provided etc Society of Petroleum Engineers:
As a student member of SPE my responsibilities included assisting in organizing various seminars/trainings/conferences held by SPE for UTP students. Master of Ceremony, College Magazine Program:
I served as Master of Ceremony (MC) in College magazine Program broadcasted by Pakistan Broadcasting Corporation Larkana, Pakistan for more than a year. The program targeted the college students and had various segments ranging from Biographies, General Knowledge, and Current Affairs to sports. Special Performance, Convofair August 2007:
I gave a traditional cultural performance at Convofair 2007 – the biggest event of the year at UTP organized for the graduating students. Articles/Book Reviews:
I have regularly been writing for local newspapers since 8 th grade on various issues ranging from book reviews, short stories, historical figures to current affairs
PERSONAL REFERENCES
Prof. Dr. Birol M.R. Demiral Schlumberger Chair in Petroleum Engineering Research Head for Enhanced Oil Recovery Head of Center of Excellence for EOR Universiti Teknologi PETRONAS Bandar Seri Iskandar, 31750 Tronoh, Perak Darul Ridzuan Malaysia D/L: +605 368 7071 H/P: +6012 917 6814 Fax: +605 365 5670
[email protected]
Assoc. Prof. Askury bin Abd Kadir Geoscience & Petroleum Engineering Department, Universiti Teknologi PETRONAS, Bandar Seri Iskandar, 31750 TRONOH, Perak Tel: +605-3687084 Fax: +605-3655670 Hp: +6019-2681959
[email protected]
Mr. Saleem Qadir Lecturer Geosciences and Petroleum Engineering Dept Universiti Teknologi PETRONAS 31750, Tronoh Perak Darul Ridzuan Malaysia Tel: +6053687055 Fax: +6053655670
[email protected]
BEST SCIENCE COMMUNICATOR AWARD, PETROSAINS, 2008
DIGI BOOT CAMP, 2008
PUBLIC SPEAKING WORKSHOP
