An air compressor is a device that converts power (usually from an electric motor, a diesel engine or a gasoline engine) into kinetic energy by compressing and pressurizing air, which, on command, ...
Descrição completa
COMPRESSOR
menjelaskan tentang fungsi dari WHC dan prinsip kerjanyaFull description
Full description
Compressor TenderFull description
rfgdfgdfgdfgDescription complète
reciprocating compressor
SK26 TBA 1_9763_50210-00_03USE
COMPRESSOR
...
details of compressorFull description
Gas Compressors used in the Oil and Gas Industries
KOBELCO Japanese Chinese
SiteMap
KOBELCO : Home KOBELCO KOBELCO KOBELCO KOBELCO
: : : :
products corporate profile catalog contact
HOME > Products > Oil Flooded Compressor > Kobelion-AG・SG
SPECIFICATIONS[Standard spacifications] AG Series Air-Cooled Models AG370A-5/6[H] Frequency Hz
Intake conditions
AG610A-5/6[H] 50/60
Discharge air volume m 3/min Pressure Temperature ºC
3.7[3.2]
6.1[5.5] Atmospheric pressure 2-40
Pressure(gauge pressure)MPa
Discharge conditions
Temperature ºC
Discharge pipe diameter A Shaft input power Output Compressor
Voltage V
motor
Specification
0.69[0.83] 45ºC or less(under conditions of
47ºC or less(under conditions of
ambient temperature of 30ºC)
ambient temperature of 30ºC)
25A(R1) kW
40A(R1
22.5
1/2)
37.7
200/200
220[380
400
415/400
440]
4-pole TEFC, insulation class F
Starting system
Star Delta
Fan motor output kW
-
Lubricant(oil) initial volume L Noise dB(A) Nominal dimensions(WxDxH) mm
-
13
20
57[56]
60[60]
1290x880x1350
Nominal weight kg
1650x900x1500
725
1000
AG900A-5/6[H]
AG1230A-5/6[H]
Frequency Hz
50/60
Discharge air volume m 3/min Intake conditions
9.0[7.5]
12.3[10.0]
Pressure
Atmospheric pressure
Temperature ºC
2-40
Discharge
Pressure(gauge pressure)MPa
conditions
Temperature ºC
0.69[0.83] 45ºC or less(under conditions of ambient temperature of 30ºC)
Discharge pipe diameter A Shaft input power Output Compressor
Voltage V
motor
Specification
10K-50A flange kW
55.0 220[380
400
415/400
Star Delta 2.2
Lubricant(oil) initial volume L
60
3.7 70
68[65]
Nominal dimensions(WxDxH) mm Nominal weight kg
440]
2-pole TEFC, insulation class F
Starting system Fan motor output kW Noise dB(A)
76.0
200/200
69[67] 2080x1200x1500
1520
1550
Water-Cooled Models
AG370W-5/6[H] Frequency Hz Intake
AG610W-5/6[H] 50/60
Discharge air volume m 3/min Pressure
conditions
Temperature ºC
Discharge
Pressure(gauge pressure)MPa
3.7[3.2]
6.1[5.5] Atmospheric pressure 2-40 0.69[0.83]
conditions
Temperature ºC
45ºC or less(under conditions of ambient temperature of 30ºC)
Discharge pipe diameter A Shaft input power Output Compressor
Voltage V
motor
Specification
25A(R1) kW
40A(R1
22.5 200/200
220[380
400
415/400
Star Delta
Coolant volume L/min
35
60
Temperature ºC
30
Diameter of cooling water outlet/inlet
R3/4
connection pipe A Lubricant(oil) initial volume L Noise dB(A) Nominal dimensions(WxDxH) mm
25A(R1)
17
22
55[55]
59[59]
1290x880x1350
Nominal weight kg
1650x900x1500
725
1000
AG900W-5/6[H]
AG1230W-5/6[H]
Frequency Hz
50/60
Discharge air volume m 3/min
9.0[7/5]
Intake
Pressure
conditions
Temperature ºC
Discharge
Pressure(gauge pressure)MPa
conditions
Temperature ºC
12.3[10.0] Atmospheric pressure 2-40 0.69[0.83]
45ºC or less(under conditions of ambient temperature of 30ºC)
Discharge pipe diameter A Shaft input power Output Compressor
Voltage V
motor
Specification
10K-50A flange kW
55.0
76.0
200/200
Coolant volume L/min
220[380
100 30 Rc2/R2
connection pipe A 60
70
65[65]
Nominal dimensions(WxDxH) mm Nominal weight kg
440]
Star Delta
Temperature ºC
Noise dB(A)
415/400
80
Diameter of cooling water outlet/inlet Lubricant(oil) initial volume L
400
2-pole TEFC, insulation class F
Starting system Coolant(water)
440]
4-pole TEFC, insulation class F
Starting system Coolant(water)
1/2)
37.7
67[67] 2080x1200x1500
1570
1590
* Values within brackets [ ] are for H specification models (discharge pressure 0.83 MPa) * Discharge air volumes have been converted to compressor intake conditions. * Please be sure to use "KOBELCO" genuine oil" or the lubricating oil recommended by KOBELCO. * Noise values are measured at a height of 1.0 m and at a distance of 1.5 m in all directions from the compressor package in anechoic chamber and under full-loading operation. Values within brackets [ ] are measured at a distance of 1.5 m from the front of the machine of and at a height of 1.0 m of i t under fullloading operation.
* Air produced by these compressors should not be used in respiratory equipment furnishing air for direct inhalation. * Since compressors depend on ambient air for cooling, the installation location must be properly ventilated to prevent ambient temperatures from rising above 40ºC. * Specifications and descriptions are subject to change without notice. * For other voltage specifications, please consult with nearest dealers. * Service factor(SF) of Main Motor is 1.1. * Be aware that a difference in water head level at cooling water inlet and outlet of 15 m or more may cause cooling water to flow too rapidly and cause the tube nest of the heat exchanger to erode. When the difference in water head level excceds 15 m, adjust t he water feed valve to reduce the difference to 15 m or less(10 m or less for AG610W-5/6[H]). * Consult us individually,chinese model.
SPECIFICATIONS[Standard spacifications] SG Series Air-Cooled Models
SG230A-5/6[H]
SG370A-5/6[H]
Frequency Hz
50/60
Discharge air volume m 3/min
2.3[2.05]
Intake
Pressure
conditions
Temperature ºC
Discharge
Pressure(gauge pressure)MPa
conditions
Temperature ºC
3.7[3.2] Atmospheric pressure 2-40 0.69[0.83]
45ºC or less(under conditions of ambient temperature of 30ºC)
Discharge pipe diameter A Shaft input power Output Compressor
Voltage V
motor
Specification Starting system
25A(R1) kW
15.7 200/200
400
2-pole TEFC, insulation class F
415/400
Lubricant(oil) initial volume L Noise dB(A)
Star Delta
-
-
10
13
59[56]
Nominal dimensions(WxDxH) mm
57[56]
1030x750x1250
Nominal weight kg
1290x880x1350
435 SG610A-5/6[H]
Frequency Hz
440]
4-pole TEFC, insulation class F
Direct starter[Star Delta]
Fan motor output kW
725 SG900A-5/6[H]
SG1230A-5/6[H]
50/60 3
Discharge air volume m /min Intake conditions
22.5 220[380
Pressure Temperature ºC
6.1 [5.5]
9.0 [7.5] Atmospheric pressure 2-40
12.3[10.0]
Pressure
0.69 [0.83]
(gauge pressure)MPa 47ºC or less
Discharge conditions Temperature ºC
(under conditions of
45ºC or less(under conditions of
ambient temperature
ambient temperature of 30ºC)
of 30ºC) Discharge pipe diameter A Shaft input power Output
40A(R1 kW
1/2) 55.0
Voltage V
Compressor motor
10K-50A flange
37.7 200/200
Specification
220[380
400
76.0 415/400
440]
2-pole TEFC,
4-pole TEFC, insulation class F
insulation class F
Starting system
Star Delta
Fan motor output kW Lubricant(oil) initial volume L Noise dB(A) Nominal dimensions(WxDxH) mm Nominal weight kg
-
2.2
20
60
60[60] 1650x900x1500
68[65]
1000
3.7 70 69[67]
2080x1200x1500
1520
1550
Water-Cooled Models
SG370W-5/6[H]
SG610W-5/6[H]
Frequency Hz
50/60
Discharge air volume m 3/min
3.7[3.2]
Intake
Pressure
conditions
Temperature ºC
Discharge
Pressure(gauge pressure)MPa
conditions
Temperature ºC
2-40
Output Compressor
Voltage V
motor
Specification
0.69[0.83] 45ºC or less(under conditions of ambient temperature of 30ºC)
Discharge pipe diameter A Shaft input power
25A(R1) kW
Coolant volume L/min
Lubricant(oil) initial volume L Noise dB(A) Nominal dimensions(WxDxH) mm Nominal weight kg
1/2)
37.7
200/200
220[380
400
415/400
440]
4-pole TEFC, insulation class F Star Delta 35
Temperature ºC
Diameter of cooling water outlet/inlet connection pipe A
40A(R1
22.5
Starting system Coolant(water)
6.1[5.5] Atmospheric pressure
60 30
R3/4 17 55[55] 1290x880x1350 725
25A(R1) 22 59[59] 1650x900x1500 1000
SG900W-5/6[H]
SG1230W-5/6[H]
Frequency Hz
50/60 3
Discharge air volume m /min Intake conditions
9.0[7.5]
12.3[10.0]
Pressure
Atmospheric pressure
Temperature ºC
2-40
Pressure(gauge Discharge conditions
0.69[0.83]
pressure)MPa Temperature ºC
45ºC or less(under conditions of ambient temperature of 30ºC)
Discharge pipe diameter A Shaft input power Output Compressor
Voltage V
motor
Specification
10K-50A flange kW
55.0
76.0
200/200
Coolant(water)
100 30 Rc2/R2
connection pipe A 60
70
65[65]
Nominal dimensions(WxDxH) mm Nominal weight kg
440]
Star Delta
Diameter of cooling water outlet/inlet
Noise dB(A)
415/400
80
L/min Temperature ºC
Lubricant(oil) initial volume L
400
2-pole TEFC, insulation class F
Starting system Coolant volume
220[380
67[67] 2080x1200x1500
1570
1590
* Values within brackets [ ] are for H specification models (discharge pressure 0.83 MPa) * Discharge air volumes have been converted to compressor intake conditions. * Please be sure to use "KOBELCO genuine oil" or the lubricating oil recommended by KOBELCO. * Noise values are measured at a height of 1.0 m and at a distance of 1.5 m in all directions from the compressor package in anechoic chamber and under full-loading operation. Values within brackets [ ] are measured at a distance of 1.5 m from the front of the machine of and at a height of 1.0 m of it under fullloading operation. * Air produced by these compressors should not be used in respiratory equipment furnishing air for direct inhalation. * Since compressors depend on ambient air for cooling, the installation location must be properly ventilated to prevent ambient temperatures from rising above 40ºC. * Specifications and descriptions are subject to change without notice. * For other voltage specifications, please consult with nearest dealers. * Service factor(SF) of Main Motor is 1.1. * Be aware that a difference in water head level at cooling water inlet and outlet of 15 m or more may cause cooling water to flow too rapidly and cause the tube nest of the heat exchanger to erode. When the difference in water head level excceds 15 m, adjust t he water feed valve to reduce the difference to 15 m or less(10 m or less for SG610W-5/6[H]). * Consult us individually,chinese model.
Any information contained on the site is subject to change without notice.
HOME| Sitemap| Products| Corporate Profile | Catalog| Contact Us