>debugging x > terminal monitor >terminal debugging -Multicast IGMP (mantiene el grupo multicast, protocolo de control) >display igmp interface >display igmp routing-table PIM-DM (protocolo de ruteo multicast, establece camino) >display pim neighbor
Table 3-13 Displaying the router configuration Operation Command Display the startup configuration of the router display saved-configuration Display the current configuration of the router display current-configuration [ controller | interface interface-type [ interface-number ] | configuration [ bgp | ospf | post-system | rip | system | user-interface ] ] Display the running configuration in the current view display this
Table 3-14 Saving the current configuration Operation Command Save the current configuration save [ cfgfile ]
Table 3-15 Erasing the configuration file in the storage devices Operation Command Erase the configuration file in the storage devices reset saved-configuration
Table 3-16 Configuring the file name of the system software used for the next startup Operation Command Configure the file name of the system s oftware used for the next startup startup system-software sysfile [ slave-board ]
Table 3-17 Configuring the name of the configuration file used for the next startup Operation Command Configure the name of the configuration file used for the next startup startup saved-configuration cfgfile
Table 3-18 Displaying the information of the file used at startup Operation Command Display the information of the file used at startup display startup
Antes de copiar una nueva configuración en Huawei. 1) 2) 3) 4) 5) 6)
reset saved-configuration apagar el equipo volver a encenderlo ingresar en modo SYS y copiar la configuración salvar la configuración con save verificar configuración con dis cu
interface GigabitEthernet3/0/2 description ACCESO_NODOB_Linea:5663653/4/5_CCOESTE_TE0/4/0/0.29023501 port hybrid pvid vlan 2902 undo port hybrid vlan 1 port hybrid untagged vlan 2902 port vlan-stacking vlan 101 to 200 stack-vlan 2902 port vlan-stacking vlan 3501 stack-vlan 2902 stp disable stp edged-port enable qos pq 5 wrr 0 to 4 6 to 7 qos queue 0 wrr weight 80 qos queue 2 wrr weight 20 undo negotiation auto #