Chinese Tv Service Code

Chinese tv service code COBY Enter menu, Hi-Lite Hi-Lite “audio” then enter 8893 Mode/Source 2580

Dynex Source/Input 2580 Hold Vol down on TV and hold the (#1) button on remote

Element Menu 0000 > menu 1147

Haier Pull up menu, Hi-Lite Hi-Lite “audio” then enter 8893.

Hisense “Parental ” enter 0000 then select “Clean All ”

Insignia Input 2580 (TV is on)

LG / Zenith Hold MENU on TV and MENU on remote for 5 to 10 seconds,

Mitsubishi Menu 123 or Menu 2470 (TV is o n)

NEC While powering ON, hold "MENU" or "INPUT" on TV,

Panasonic Hold [ VOL-- ] on TV, press and hold menu button on remote.

Philips Push Menu , select 062596

Polaroid Hold [VOL--] and [CHANNEL--] or hold [VOL+] and [CHANNEL+] (TV is on)

Proscan In customer menu go to setup, select parental control menu, enter 0000 then select “clear channel list”.

RCA Menu 1147

Sanyo Hold VOL Down on TV, press and hold #1 button on remote, VOL will jump to halfway and set shuts off. Turn back on have 1st time setup screen.

Samsung Mute 182 power

Samsung (European) Power off, Info - Menu - Mute - Power,

Seiki Menu 0000

Sharp Menu, 1999 Menu, 3481 Menu, 1147 While holding [ VOL – & INPUT ] buttons on TV plug in se t when “K ” appears push (VOL– & CHANNEL-)

Sony Hold “arrow up” on Remote and push power button on TV (TV is ON)

Symphony Source/input 2580

Toshiba On Menu, select “Installation”, then “ System Information” press the right arrow button.

(“System Information” will change to “Factory Reset” or something similar)

Vestel Menu 4725 then select "RESET"

Vision Quest Source / Input 2580

Vizio menu under “Help” tab is Factory Default e nter 0000

Haier LCD 1. Press “MENU/EXIT”; 2. Press”1”+”9” +”9” +”9”; 3. Press “OK”

Panasonic While pressing [VOLUME ( - )] button of the main unit, press [INFO] button of the remote control three times within 2 seconmo

AOC TV mode adjust volume to zero, press m ute key and press number key 9 8 7 6 .

TCL service mode = Press MENU, Select CONTRAST then enter 9735 or 1950 you will enter Factory mode and Design mode respectively.