CFPRG V26 + FDPRG V28 (Verification Tool)

Gaming Laboratories International Evaluation Report Report No 2014ARI1047LC135 Date 7 November 2014

Issuing Laboratory

Client

Tested against Requirements

Jurisdiction

The recipient, by its acceptance of this report or analysis, will be deemed to have acknowledged and agreed to all of the “terms and conditions” set forth below. If the recipient does not agree to all of such terms and conditions, GLI withdraws the certification provided or analysis established by this report and the recipient must immediately return to GLI all copies of this report and make no reference to this report for any purpose at any time.

Evaluating Laboratory

GLI Europe B.V.

Aristocrat Technologies Australia Pty Ltd. Building A, Pinnacle Office Park 85 Epping Road North Ryde NSW 2113 Australia - Paragraph 3 of Article 80a of the Consolidated Gaming Act, Official Gazette of the Republic of Slovenia, No. 14/2011 dated 4th March 2011. - Regulation 59/2008 dated 13th June 2008 - (2491) - Regulation on Technical Requirements for Gaming Devices and on Conformity Assessment Procedure. - Regulation 88/2009 dated 5th November 2009 - (3875) - Regulation Concerning the Modifications and Amendment on Technical Requirements for Gaming Devices and on Conformity Assessment Procedure. - Regulation 37/2011 dated 20th May 2011 – (1848) – Regulation Concerning the Modifications and Amendment on Technical Requirements for Gaming Devices and on Conformity Assessment Procedure. - Regulation 109/2012 dated 31st December 2012 – (4359) – Regulation amending the regulation on the conditions t o be met by a Gambling Organizer. - Regulation 38/2014 dated 30th May 2014 – (4120) – Regulation Concerning the Modification of the Regulation on Technical Requirements for Gaming Devices and on Conformity Assessment Procedure. Slovenia

Manufacturer

Aristocrat Technologies Australia Pty Ltd. Building A, Pinnacle Office Park 85 Epping Road North Ryde NSW 2113 Australia

Applicant

Aristocrat Technologies Australia Pty Ltd. Building A, Pinnacle Office Park 85 Epping Road North Ryde NSW 2113 Australia

Product Name

CFPRG, FDPRG

Product Style

Verification Tool

Description of the Product Tested Date Received / Date Completed Evaluation Period Result

Sections

GLI Las Vegas Las Vegas Service Center 7160 Amigo Street Las Vegas, Nevada 89119 USA

cfprg.exe v26, fdprg.exe v28

As requested per manufacturer’s letter dated 17 th September 2014. 17th September 2014 / 7th November 2014 17th September 2014 / 31st October 2014 -

N/A (See Comments and Conditions, and Jurisdictional Requirements on page 2)

-

Comments/Conditions Manufacturer’s Documentation Hardware Product Details Software Product Details Applied Tests Descriptions Product Characteristics Jurisdictional Requirements Annex Affirmative Statement of Compliance Terms and Conditions

Internal Reference: MO-135-ARI-14-01 Modified 11 August 2014

SLO – LC135

Page 1 of 10


Comments/Conditions Comments

As from 1st July 2006, it is the manufacturer’s responsibility to ensure that their product is RoHS compliant with current EU directives. The program GLI Verify® V7.0 was used to generate the SHA-1 and CDCK signatures listed in the Software Product Details section of this Report. GLI Verify® - Verification Procedure: 1. Open GLI Verify® Version 7.0. 2. Select the ‘File’ radio button. 3. Click on the ‘Browse’ button and specify the file you wish to signature. 4. Click the ‘Verify’ button 5. The program will generate a CDCK and SHA-1 signature and display the results in the center window Only the verification functionality of the cfprg.exe and fdprg.exe applications has been tested. To the submitter of this Report (Reference Number: 2014ARI1047LC135) below listed items will be provided: Binaries. ·

Conditions

There are not conditions applicable to this Report.


SLO – LC135

Page 2 of 10


Manufacturer’s Documentation Document NO

Document Title

Date of Issue

N/A

Manufacturer’s summission letter

17 th September 2014


SLO – LC135

Page 3 of 10


Hardware Product Details There are no Hardware Product Details applicable to this Report


SLO – LC135

Page 4 of 10


Software Product Details Product ID

cfprg.exe V26

fdprg.exe V28

•

Media Type

File

File

Function

Verification Tool

Verification Tool

Position

N/A

N/A

Size

Kobetron

9.71MB

9.25MB

N/A

N/A

Kobetron Extended

N/A

N/A

CDCK

SHA-1 Signature

RTP%

Report Number

6E9C

E4E938B2 3932C06C 1F2C7037 7CD116FC 6EF12448

N/A

•

6F2C

D625FF8C BF020833 DDA4331C F4408A99 CC5D11D1

N/A

•

The tests performed are listed in the Applied Tests section of this Report.


SLO – LC135

Page 5 of 10


Applied Tests Product ID cfprg.exe v26 fdprg.exe v28

Test Performed

Jurisdictional Regulations Review

Reference NO

Results

Additional Details

WI TL03_02

Pass

Internal Reference: MO-135-ARI-14-01


SLO – LC135

Page 6 of 10


Product Description Product ID

Characteristics

‘CFPRG.exe’ is a Windows XP application created by Aristocrat to verify and create Compact Flash cards. This tool runs from the command line and requires a Compact Flash Reader attached to the PC. The command ‘cfprg.exe -r0 –H’ will calculate the HMAC SHA-1 signatures of the 5 components included in the Compact Flash card. This command will show the binary image name (MBR, Bootldr, Linux OS, Platform and game00) with its version and its signature. HMAC SHA-1 Field Verification Procedure: 1. Using the manufacturer supplied application tool ‘cfprgh.exe’, a card reader, and a Windows based PC, HMAC SHA-1 signatures can be obtained for the individual components of the Compact Flash. 2. Plug the card reader into a PC USB connector and insert the Compact Flash into the card reader. 3. Open a DOS box on the PC and go to the designated directory where the application tool ‘cfprg.exe’ is located. 4. Execute the following command in the DOS box: cfprg –r0 –H. 5. The output hashes of the individual components will be displayed on the PC in the DOS box.

cfprg.exe v26

‘FDPRG.exe’ is a Windows XP application created by Aristocrat to verify and create SSD drives and CFast cards. This tool runs from the command line and requires an SSD or CFast Reader attached to the PC. The command ‘fdprg.exe -d0 –H’ will calculate the HMAC SHA-1 signatures of the 5 components included in the SSD drive or in the Compact Flash card. This command will show the binary image name (MBR, Bootldr, Linux OS, Platform and game00) with its version and its signature.

fdprg.exe v28

HMAC SHA-1 Field Verification Procedure: 1. Using the manufacturer supplied application tool ‘fdprg.exe’, a SSD or CFast reader, and a Windows based PC, HMAC SHA-1 signatures can be obtained for the individual components of the SSD/CFast card. 2. Connect the SSD/CFast card to a PC. 3. Open a DOS box on the PC and go to the designated directory where the application tool ‘fdprg.exe’ is located. 4. Execute the following command in the DOS box: fdprg –d0 –H. 5. The output hashes of the individual components will be displayed on the PC in the DOS box.


SLO – LC135

Page 7 of 10


Jurisdictional Requirements N/A - There are no technical requirements applicable to this evaluation report. However, Verification tools “cfprg.exe v26” and ”fdprg.exe v28” can be used to ensure the compliance of the jurisdictional requirements with regards to checking the authenticity of the software.


SLO – LC135

Page 8 of 10


Affirmative Statement of Compliance GLI hereby affirms that all testing, verifications, evaluations and determinations of compliance were performed in accordance with the requirements in our scope of accreditation. The item(s) listed in the “Description of the Product Tested” row on the first page of this Report were evaluated for compliance in accordance with the following legislations: Paragraph 3 of Article 80a of the Consolidated Gaming Act, Official Gazette of the Republic of Slovenia, No. 14/2011 dated 4 th March 2011. Regulation 59/2008 dated 13 th June 2008 - (2491) - Regulation on Technical Requirements for Gaming Devices and on Conformity Assessment Procedure. th Regulation 88/2009 dated 5 November 2009 - (3875) - Regulation Concerning the Modifications and Amendment on Technical Requirements for Gaming Devices and on Conformity Assessment Procedure. Regulation 37/2011 dated 20 th May 2011 – (1848) – Regulation Concerning the Modifications and Amendment on Technical Requirements for Gaming Devices and on Conformity Assessment Procedure. st Regulation 109/2012 dated 31 December 2012 – (4359) – Regulation amending the regulation on the conditions to be met by a Gambling Organizer. Regulation 38/2014 dated 30 th May 2014 – (4120) – Regulation Concerning the Modification of the Regulation on Technical Requirements for Gaming Devices and on Conformity Assessment Procedure.

Please refer to the Jurisdictional Requirements section for specific details concerning our evaluation of the product(s) referenced herein in accordance with the applicable regulatory requirements. Please contact our office at +31 252 529 838 if you have any questions concerning the information in this Report.

Tested by: Hugo Lluelles Reviewed by: Robert Wuest Technical Evaluation authorized by:

John van Schaijk Technical Director


SLO – LC135

Page 9 of 10


Terms and Conditions This Report is issued solely for the benefit of the Client for use only for and limited to the specific jurisdiction or standards referenced in the Report. This Report may not be relied upon for any reason by any person or entity other than the Client including, but not necessarily limited to, the manufacturer or developer of the items, a non-GLI Laboratory, or a Regulator not named in the Report (“a Third Party”). Any Report produced by GLI is proprietary to GLI and the Client, because it contains confidential information of commercial value, the exposure of which to third parties could adversely affect both GLI and the Client. Accordingly, such confidential information is supplied in confidence, on the strict condition that no part of it will be reprinted or reproduced or transmitted to any parties external to the original contract without the prior written approval of the Parties. In particular, it will not be exposed to any person or organization which may be in competition with any of the Parties without the prior written approval of that Party. The testing performed by GLI is proprietary to GLI and/or various regulators. No third party may use, rely or refer to a GLI evaluation report, test report, certification document or test results without written permission of GLI and the respective regulator. Notwithstanding the above, the Parties may disclose confidential information if required to do so by regulatory agencies, pursuant to the laws and regulations of an applicable jurisdiction or by an order of a properly designated Court of Law in a relevant jurisdiction. However, in either case the Parties agree to immediately notify the other party of such a request. Notwithstanding the above, any regulator may reprint, reproduce and transmit any document or information to any party that the regulator, in their sole discretion, deems appropriate. This Report shall not be reproduced, except in full, without the approval of GLI Europe and the Recipient(s). Any certification established by this Report applies exclusively to tests conducted on the specific items submitted, by the manufacturer or any other party, which are described on page one of this Report. It is the responsibility of the manufacturer and/or developer of the items submitted to apply for, obtain and maintain all necessary gaming licensure in each jurisdiction in which they do business, including state and tribal jurisdictions, where applicable. Any electrostatic test methods used by GLI Europe are intended only to simulate techniques observed in the field being used to attempt to disrupt the integrity of Electronic Gaming Devices. During the course of the testing, GLI Europe checks for marks, symbols or documents indicating that a device has undergone product safety or RoHS compliance testing, if required. GLI Europe also performs a cursory review of information accompanying the items submitted, where possible and when provided, for evidence that the items have undergone compliance testing for Electromagnetic Interference (EMI), Radio Frequency Interference (RFI), Magnetic Interference, Liquid Spills, Power Fluctuations, Electrostatic Immunity, Electromagnetic Compatibility and Environmental conditions. Compliance with any such regulations related to the aforementioned testing is the sole responsibility of the manufacturer and/or developer of the items submitted; GLI Europe accepts no responsibility, makes no representations and disclaims any liability with respect to all such non-gaming testing. Details of the testing methods used, excluded testing, and actual data showing the testing results are available to the Recipient(s) upon written request. GLI EUROPE WARRANTS TO THE RECIPIENT THAT ALL SERVICES PROVIDED BY GLI EUROPE HEREUNDER HAVE BEEN PERFORMED IN ACCORDANCE WITH ESTABLISHED AND RECOGNIZED TESTING PROCEDURES AND WITH REASONABLE CARE IN ACCORDANCE WITH APPLICABLE LAWS. GLI EUROPE DOES NOT MAKE, AND EXPRESSLY DISCLAIMS, ALL OTHER WARRANTIES OF ANY KIND, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF NONINFRINGEMENT, MERCHANTABILITY, SUITABILITY OR FITNESS FOR A PARTICULAR PURPOSE. WITHOUT LIMITING ANY OF THE FOREGOING, UNDER NO CIRCUMSTANCES SHOULD THE CERTIFICATION ESTABLISHED BY THIS REPORT BE CONSTRUED TO IMPLY ANY ENDORSEMENT OR WARRANTY REGARDING THE FUNCTIONALITY, QUALITY OR PERFORMANCE OF THE SUBJECT HARDWARE OR SOFTWARE, AND NO PERSON OR PARTY SHALL STATE OR IMPLY ANYTHING TO THE CONTRARY. THE LIABILITY AND OBLIGATIONS OF GLI EUROPE HEREUNDER, AND THE REMEDY OF THE RECIPIENT, UNDER OR IN CONNECTION WITH THIS AGREEMENT SHALL BE LIMITED TO, AT GLI EUROPE’S OPTION, REPLACEMENT OF THE SERVICES PROVIDED OR THE REFUND BY GLI EUROPE OF ANY MONIES RECEIVED BY IT FOR THE SERVICES PROVIDED. IN NO EVENT SHALL GLI EUROPE BE RESPONSIBLE TO THE RECIPIENT OR ANY THIRD PARTY FOR ANY CONSEQUENTIAL, INCIDENTAL, DIRECT, INDIRECT OR SPECIAL DAMAGES, INCLUDING WITHOUT LIMITATION DAMAGES FOR LOST PROFITS OR REVENUE, BUSINESS INTERRUPTION, OR PUNITIVE DAMAGES, EVEN IF GLI EUROPE HAD BEEN ADVISED OF THE POTENTIAL FOR SUCH DAMAGES AND WHETHER SUCH DAMAGES ARISE IN CONTRACT, NEGLIGENCE, TORT, UNDER STATUTE, IN EQUITY, AT LAW OR OTHERWISE. ALL RIGHTS AND REMEDIES OF THIRD PARTIES RELATING TO PRODUCTS AND SERVICES THAT ARE THE SUBJECT OF THE CERTIFICATION ESTABLISHED BY THIS REPORT SHALL BE THE EXCLUSIVE RESPONSIBILITY OF THE RECIPIENT AND GLI EUROPE EXPRESSLY DISCLAIMS ANY LIABILITY WHATSOEVER IN CONNECTION WITH SUCH THIRD PARTY RIGHTS AND REMEDIES. GLI EUROPE AND THE RECIPIENT ACKNOWLEDGE AND AGREE THAT THE SERVICES PROVIDED BY GLI EUROPE HEREUNDER COULD NOT BE RENDERED BY GLI EUROPE UNDER THE TERMS PROVIDED HEREIN WITHOUT AN INCREASE IN COST IF GLI EUROPE WAS REQUIRED TO PROVIDE ANY WARRANTIES IN ADDITION TO, OR IN LIEU OF, OR WAS REQUIRED TO ASSUME ANY LIABILITY IN EXCESS OF, THE FOREGOING. If you should have any questions regarding this information, please feel free to contact our office. Sincerely, GLI EUROPE BV Internal Reference: MO-135-ARI-14-01 Modified 11 August 2014

SLO – LC135

Page 10 of 10

CFPRG V26 + FDPRG V28 (Verification Tool)

Recommend Documents