BS Code Guide

British Standards – Quick Reference Guide The following British Standards are listed or referred to in this issue of Update Standards with the exception of those in ‘New Work Started’.

Building and civil engineering BS 598 ..................... ............................................ .....................................15, ..............15, 18 BS 4211 ..................... ............................................ .........................................15 ..................15 BS 6088 ..................... ............................................ .........................................17 ..................17 BS 6282 ..................... ............................................ .........................................18 ..................18 BS 7412 ..................... ............................................ .........................................19 ..................19 BS 8100 ..................... ............................................ .........................................16 ..................16 BS 8110 ..................... ............................................ .........................................18 ..................18 BS 8493 ..................... ............................................ ...........................................8 ....................8 DD 213 ...................... ............................................. .........................................18 ..................18 BS EN 975 .................... ........................................... ......................................20 ...............20 BS EN 1917 ...................... ............................................. ..................................15 ...........15 BS EN 12273 .................... ........................................... ..................................10 ...........10 BS EN 12808 .................... ........................................... ..................................10 ...........10 BS EN ISO 13789 ...................... ............................................. ..........................10 ...10 BS EN 13959 ...................... ............................................. ..........................15, ...15, 18 BS EN 13990 .................... ........................................... ..................................21 ...........21 BS EN 14076 .................... ........................................... ..................................21 ...........21 BS EN 14317 .................... ........................................... ..................................11 ...........11 BS EN 14451 ...................... ............................................. ..........................15, ...15, 18 BS EN 15603 .................... ........................................... ..................................11 ...........11 DD ENV 14464 ..................... ............................................ ..............................21 .......21 BS ISO 29470 ....................... .............................................. ..............................14 .......14 PD CEN/TR 15728 ..................... ............................................ ..........................14 ...14

Consumer products and services BS 969 ....................... .............................................. ...........................................8 ....................8 BS 4540 ..................... ............................................ .........................................19 ..................19 BS 4585 ..................... ............................................ .........................................19 ..................19 BS EN 1116 ...................... ............................................. ..................................20 ...........20 BS EN 1177 ...................... ............................................. ....................................8 .............8 BS EN 1957 ...................... ............................................. ..................................20 ...........20 BS EN 13721 .................... ........................................... ..................................21 ...........21 BS EN 13722 .................... ........................................... ..................................21 ...........21 BS EN 14073 .................... ........................................... ..................................21 ...........21 BS EN 14074 .................... ........................................... ..................................21 ...........21 BS EN 15570 .................... ........................................... ..................................11 ...........11 BS ISO 5 ....................... .............................................. ......................................22 ...............22 BS ISO 762 ....................... .............................................. ..................................22 ...........22 BS ISO 763 ....................... .............................................. ..................................22 ...........22 BS ISO 855 ....................... .............................................. ..................................22 ...........22 BS ISO 2173 ..................... ............................................ ..................................22 ...........22 BS ISO 2240 ..................... ............................................ ..................................22 ...........22 BS ISO 3519 ..................... ............................................ ..................................22 ...........22 BS ISO 3761 ..................... ............................................ ..................................22 ...........22 BS ISO 8899 ..................... ............................................ ..................................23 ...........23 BS ISO 8900 ..................... ............................................ ..................................23 ...........23 BS ISO 9848 ..................... ............................................ ..................................23 ...........23 BS ISO 14717 ....................... .............................................. ..............................14 .......14 BS ISO 16067 ....................... .............................................. ..............................23 .......23 BS ISO 16212 ....................... .............................................. ..............................14 .......14 BS ISO 18929 ....................... .............................................. ..............................24 .......24 BS ISO 18938 ....................... .............................................. ..............................14 .......14 BS ISO 20462 ....................... .............................................. ..............................24 .......24 BS ISO 21093 ....................... .............................................. ..............................24 .......24 BS ISO 21390 ....................... .............................................. ..............................24 .......24 BS ISO 22234 ....................... .............................................. ..............................24 .......24

Electrotechnical BS 697 ....................... .............................................. .........................................17 ..................17 BS 5266 ..................... ............................................ ...........................................8 ....................8 BS 7288 ..................... ............................................ .........................................16 ..................16 BS EN 13757 .................... ........................................... ..................................10 ...........10 BS EN 60065 .................... ........................................... ..................................19 ...........19 BS EN 60076 .................... ........................................... ..................................11 ...........11 BS EN 60255 .................... ........................................... ..................................11 ...........11

4

BS EN 60289 ....................... .............................................. ...............................11 ........11 BS EN 60317 ....................... .............................................. ...............................11 ........11 BS EN 60491 ....................... .............................................. ...............................19 ........19 BS EN 60730 ..................... ............................................ ...........................11, ....11, 19 BS EN 61300 ....................... .............................................. ...............................12 ........12 BS EN 61754 ....................... .............................................. ...............................12 ........12 BS EN 61810 ....................... .............................................. ...............................19 ........19 BS EN 61970 ....................... .............................................. ...............................12 ........12 BS EN 61996 ....................... .............................................. ...............................12 ........12 BS EN 62031 ....................... .............................................. ...............................12 ........12 BS IEC 60870 ......................................................14 ......................................................14 DD IEC/PAS 62396 ...................... ............................................. ........................14 .14 DD IEC/PAS 62588 ...................... ............................................. ........................14 .14 DD IEC/TS 62396 ..................... ............................................ ...........................14 ....14

Engineering BS 4361 ....................... .............................................. .......................................19 ................19 BS 5655 ....................... .............................................. .......................................17 ................17 BS 6607 ....................... .............................................. .......................................20 ................20 BS 6916 ..................... ............................................ ...................................12, ............12, 19 BS 7020 ....................... .............................................. .......................................20 ................20 BS 7745 ....................... .............................................. .......................................20 ................20 DD CEN/TS 15053 ...................... ............................................. ........................17 .17 DD CEN ISO/TS 21432 .................... ........................................17 ....................17 BS EN 444 ....................... .............................................. ...................................16 ............16 BS EN 462 ....................... .............................................. ...................................16 ............16 BS EN 583 ....................... .............................................. ...................................16 ............16 BS EN 1124 ..................... ............................................ .....................................8 ..............8 BS EN 1301 ..................... ............................................ ...................................10 ............10 BS EN 1330 ..................... ............................................ ...................................16 ............16 BS EN 1518 ..................... ............................................ ...................................16 ............16 BS EN 1591 ..................... ............................................ ...................................10 ............10 BS EN 1593 ..................... ............................................ ...................................16 ............16 BS EN 1715 ..................... ............................................ ...................................10 ............10 BS EN 1779 ..................... ............................................ ...................................16 ............16 BS EN ISO 2342 ....................... .............................................. ...........................16 ....16 BS EN ISO 3452 ....................... .............................................. ...........................16 ....16 BS EN ISO 3953 ....................... .............................................. ...........................20 ....20 BS EN ISO 4026 ....................... .............................................. ...........................16 ....16 BS EN ISO 4027 ....................... .............................................. ...........................16 ....16 BS EN ISO 4028 ....................... .............................................. ...........................16 ....16 BS EN ISO 4029 ....................... .............................................. ...........................16 ....16 BS EN ISO 4126 ....................... .............................................. ...........................20 ....20 BS EN ISO 4934 ....................... .............................................. ...........................20 ....20 BS EN ISO 7048 ....................... .............................................. ...........................16 ....16 BS EN ISO 10664 ..................... ............................................ ...........................16 ....16 BS EN ISO 10806 ..................... ............................................ ...........................20 ....20 BS EN 12223 ....................... .............................................. ...............................16 ........16 BS EN 12409 ....................... .............................................. ...............................10 ........10 BS EN 12421 ....................... .............................................. ...............................16 ........16 BS EN 12543 ....................... .............................................. ...............................16 ........16 BS EN 12544 ..................... ............................................ ...........................16, ....16, 17 BS EN 12679 ....................... .............................................. ...............................17 ........17 BS EN 13068 ....................... .............................................. ...............................17 ........17 BS EN 13348 ....................... .............................................. ...............................10 ........10 BS EN 13802 ....................... .............................................. ...............................21 ........21 BS EN 13925 ....................... .............................................. ...............................17 ........17 BS EN 13927 ....................... .............................................. ...............................17 ........17 BS EN 13957 ....................... .............................................. ...............................10 ........10 BS EN 13958 ....................... .............................................. ...............................11 ........11 BS EN 14096 ....................... .............................................. ...............................17 ........17 BS EN 14218 ....................... .............................................. ...............................17 ........17 BS EN 14219 ....................... .............................................. ...............................17 ........17 BS EN ISO 14935 ..................... ............................................ ...........................21 ....21 BS EN ISO 15065 ..................... ............................................ ...........................17 ....17 BS EN 15093 ....................... .............................................. ...............................11 ........11 BS EN 15094 ....................... .............................................. ...............................11 ........11 BS EN 15272 ....................... .............................................. ...............................11 ........11 BS EN ISO 16047 ..................... ............................................ ...........................17 ....17 BS EN ISO 20783 ..................... ............................................ ...........................21 ....21

Prices may be subject to change.

BS EN ISO 21670 ....................... .............................................. .........................17 ..17 BS EN ISO 23953 ....................... .............................................. .........................22 ..22 BS EN 25580 ..................... ............................................ .................................17 ..........17 DD ENV 1591 .................... ........................................... .................................10 ..........10 BS ISO 76 ....................... .............................................. ....................................22 .............22 BS ISO 113 ..................... ............................................ ....................................22 .............22 BS ISO 155 ..................... ............................................ ....................................22 .............22 BS ISO 199 ..................... ............................................ ....................................22 .............22 BS ISO 254 ..................... ............................................ ....................................22 .............22 BS ISO 461 ..................... ............................................ ....................................17 .............17 BS ISO 1122 ...................... ............................................. .................................22 ..........22 BS ISO 1919 ...................... ............................................. .................................22 ..........22 BS ISO 2344 ...................... ............................................. .................................22 ..........22 BS ISO 2534 ...................... ............................................. .................................22 ..........22 BS ISO 2704 ...................... ............................................. .................................22 ..........22 BS ISO 4010 ...................... ............................................. .................................22 ..........22 BS ISO 4126 ...................... ............................................. .................................12 ..........12 BS ISO 4411 ...................... ............................................. .................................12 ..........12 BS ISO 5389 ...................... ............................................. .................................22 ..........22 BS ISO 5391 ...................... ............................................. .................................22 ..........22 BS ISO 6264 ...................... ............................................. .................................22 ..........22 BS ISO 6535 ..................... ............................................ ............................12, .....12, 19 BS ISO 6621 ...................... ............................................. .................................22 ..........22 BS ISO 6622 ...................... ............................................. .................................22 ..........22 BS ISO 6624 ...................... ............................................. .................................22 ..........22 BS ISO 6966 ...................... ............................................. .................................23 ..........23 BS ISO 6968 ...................... ............................................. .................................23 ..........23 BS ISO 7063 ...................... ............................................. .................................23 ..........23 BS ISO 7146 ...................... ............................................. .................................12 ..........12 BS ISO 7654 ...................... ............................................. .................................23 ..........23 BS ISO 8404 ...................... ............................................. .................................23 ..........23 BS ISO 8443 ...................... ............................................. .................................23 ..........23 BS ISO 9981 ...................... ............................................. .................................23 ..........23 BS ISO 9982 ...................... ............................................. .................................23 ..........23 BS ISO 10054 .................... ........................................... .................................23 ..........23 BS ISO 10129 .................... ........................................... .................................12 ..........12 BS ISO 11500 .................... ........................................... .................................12 ..........12 BS ISO 11901 .................... ........................................... .................................23 ..........23 BS ISO 12140 .................... ........................................... .................................23 ..........23 BS ISO 12745 .................... ........................................... .................................14 ..........14 BS ISO 13203 .................... ........................................... .................................23 ..........23 BS ISO 13357 .................... ........................................... .................................23 ..........23 BS ISO 13556 .................... ........................................... .................................23 ..........23 BS ISO 14469 .................... ........................................... .................................23 ..........23 BS ISO 14681 .................... ........................................... .................................23 ..........23 BS ISO 14794 .................... ........................................... .................................23 ..........23 BS ISO 15312 .................... ........................................... .................................23 ..........23 BS ISO 16860 .................... ........................................... .................................23 ..........23 BS ISO 16915 .................... ........................................... .................................23 ..........23 BS ISO 17080 .................... ........................................... .................................23 ..........23 BS ISO 17559 .................... ........................................... .................................24 ..........24 BS ISO 17584 .................... ........................................... .................................24 ..........24 BS ISO 18084 .................... ........................................... .................................24 ..........24 BS ISO 18653 .................... ........................................... .................................24 ..........24 BS ISO 19438 .................... ........................................... .................................24 ..........24 BS ISO 21009 .................... ........................................... .................................14 ..........14 BS ISO 24347 .................... ........................................... .................................24 ..........24 BS ISO 26322 .................... ........................................... .................................14 ..........14 BS 2A 296 ...................... ............................................. ....................................24 .............24 BS A 305 .................... ........................................... ........................................24 .................24 BS 4G 173 ...................... ............................................. ....................................24 .............24 BS 2G 219 ...................... ............................................. ....................................24 .............24 BS 2M 52 ....................... .............................................. ....................................24 .............24 BS M 55 ..................... ............................................ ........................................24 .................24 BS M 57 ..................... ............................................ ........................................24 .................24 BS M 61 ..................... ............................................ ........................................24 .................24 BS M 66 ..................... ............................................ ........................................24 .................24 BS HC 404 ...................... ............................................. ....................................18 .............18 BS 3SP 89 ....................... .............................................. ....................................24 .............24 BS AU 259 ...................... ............................................. ....................................24 .............24

Update Standards Dec 2008

British Standards – Quick Reference Guide continued... Health and environment BS 5724 ....................... .............................................. .......................................18 ................18 BS 6902 ........................................................11, ........................................................11, 18 BS 7445 ....................... .............................................. .......................................16 ................16 BS EN ISO 3382 ...................... ............................................. ............................10 .....10 BS EN 12563 .................... ........................................... ............................11, .....11, 19 BS EN 15004 .................... ........................................... ............................11, .....11, 19 BS EN 15446 ...................... ............................................. ................................11 .........11 BS EN ISO 21535 ...................... ..........................................11 ....................11,, 19 BS EN 45502 .................... ........................................... ............................11, .....11, 18 BS EN 60601 ...................... ............................................. ................................18 .........18 BS ISO 5667 ....................... .............................................. ................................12 .........12 BS ISO 14520 ....................... .............................................. ........................11, .11, 19

Information systems BS 7083 ....................... .............................................. .......................................17 ................17 BS EN ISO 18104 .................... ........................................... ............................21 .....21 BS EN ISO 19112 .................... ........................................... ............................21 .....21 BS EN ISO 19133 .................... ........................................... ............................21 .....21 BS EN ISO 19135 .................... ........................................... ............................21 .....21 BS ISO/IEC 7816 ..................... ............................................ ............................23 .....23 BS ISO/IEC 11694 ....................... .............................................. ........................14 .14 BS ISO/IEC 13249 ....................... .............................................. ........................23 .23 BS ISO 19128 ..................... ............................................ ................................24 .........24 PD ISO/IEC TR 90005 ...................... ..........................................14 ....................14

Materials and chemicals BS 1583 ..........................................................8, ..........................................................8, 18 BS 3483 ........................................................19, ........................................................19, 20 BS 5072 ....................... .............................................. .......................................20 ................20 BS 6057 ........................................................12, ........................................................12, 18 DD CEN ISO/TS 27687 ....................... ........................................14 .................14 BS EN ISO 105 .................... ........................................... ................................20 .........20 BS EN ISO 150 .................... ........................................... ................................20 .........20 BS EN 589 ...................... .............................................. ......................................8 ..............8 BS EN ISO 648 ...................... ............................................. ..........................8, ...8, 18 BS EN 725 ...................... .............................................. ......................................8 ..............8 BS EN ISO 787 .................... ........................................... ................................20 .........20 BS EN 927 ...................... .............................................. ......................................8 ..............8 BS EN 1018 .................... ............................................ ......................................8 ..............8 BS EN 1019 .................... ............................................ ......................................8 ..............8 BS EN ISO 1248 ...................... ............................................. ............................20 .....20 BS EN ISO 2360 ...................... ............................................. ............................20 .....20 BS EN ISO 3175 ...................... ............................................. ............................20 .....20 BS EN ISO 3262 ...................... ............................................. ............................20 .....20 BS EN ISO 4618 ...................... ............................................. ............................20 .....20 BS EN ISO 4684 ...................... ............................................. ............................20 .....20 BS EN ISO 6401 ...................... ............................................. ............................10 .....10 BS EN ISO 8502 ...................... ............................................. ............................18 .....18 BS EN ISO 10081 .................... ....................................15, ................15, 19, 20 BS EN ISO 10931 .................... ........................................... ............................21 .....21 BS EN ISO 11890 .................... ........................................... ............................10 .....10 BS EN 12475 ...................... ............................................. ................................19 .........19 BS EN 12882 ...................... ............................................. ................................10 .........10 BS EN 12911 ...................... ............................................. ................................10 .........10 BS EN ISO 14419 .................... ........................................... ............................21 .....21 BS EN ISO 15236 .................... ........................................... ............................21 .....21 BS EN 15688 ...................... ............................................. ................................11 .........11 BS EN ISO 15732 .................... ........................................... ............................21 .....21 BS EN ISO 15874 .................... ........................................... ............................21 .....21 BS EN ISO 15875 .................... ........................................... ............................21 .....21 BS EN ISO 15876 .................... ........................................... ............................21 .....21 BS EN ISO 17834 .................... ........................................... ............................21 .....21 BS EN ISO 18756 .................... ........................................... ............................21 .....21 BS EN ISO 18757 .................... ........................................... ............................21 .....21 BS EN ISO 19954 .................... ........................................... ............................21 .....21 BS EN ISO 21178 .................... ........................................... ............................21 .....21 BS EN ISO 21179 .................... ........................................... ............................21 .....21 BS EN ISO 21180 .................... ........................................... ............................21 .....21


BS EN ISO 21181 ....................... .............................................. .........................22 ..22 BS EN ISO 21182 ....................... .............................................. .........................22 ..22 BS EN ISO 21183 ....................... .............................................. .........................22 ..22 DD ENV 927 ...................... ............................................. ...................................8 ............8 BS ISO 124 ...................... ............................................. .............................12, ......12, 18 BS ISO 1170 ...................... ............................................. .................................12 ..........12 BS ISO 1505 ...................... ............................................. .................................22 ..........22 BS ISO 2385 ...................... ............................................. .................................22 ..........22 BS ISO 6743 ...................... ............................................. .................................22 ..........22 BS ISO 8007 ...................... ............................................. .................................23 ..........23 BS ISO 8008 ...................... ............................................. .................................23 ..........23 BS ISO 9276 ...................... ............................................. .................................12 ..........12 BS ISO 9588 ...................... ............................................. .................................12 ..........12 BS ISO 9947 ...................... ............................................. .................................23 ..........23 BS ISO 10059 .................... ........................................... .................................23 ..........23 BS ISO 10458 .................... ........................................... .................................23 ..........23 BS ISO 10952 .................... ........................................... .................................12 ..........12 BS ISO 14595 .................... ........................................... .................................17 ..........17 BS ISO 15112 .................... ........................................... .................................14 ..........14 BS ISO 15237 .................... ........................................... .................................23 ..........23 BS ISO 15238 .................... ........................................... .................................23 ..........23 BS ISO 15970 .................... ........................................... .................................14 ..........14 BS ISO 17455 .................... ........................................... .................................24 ..........24 BS ISO 17470 .................... ........................................... .................................17 ..........17 BS ISO 18114 .................... ........................................... .................................17 ..........17 BS ISO 18573 .................... ........................................... .................................24 ..........24 BS ISO 19334 .................... ........................................... .................................24 ..........24 BS ISO 20203 .................... ........................................... .................................24 ..........24 BS ISO 20508 .................... ........................................... .................................24 ..........24 BS ISO 22029 .................... ........................................... .................................24 ..........24 BS ISO 22493 .................... ........................................... .................................14 ..........14 BS ISO 23380 .................... ........................................... .................................14 ..........14 PD ISO/TR 11150 ....................... .............................................. .........................14 ..14

Alpha-numeric sequence sequence of British Standards quoted in this issue BS 598 ..................... ............................................ .....................................15, ..............15, 18 BS 697 ....................... .............................................. .........................................17 ..................17 BS 969 ....................... .............................................. ...........................................8 ....................8 BS 1583 ....................... .............................................. ...................................8, ............8, 18 BS 3483 ....................... .............................................. .................................19, ..........19, 20 BS 4211 ..................... ............................................ .........................................15 ..................15 BS 4361 ..................... ............................................ .........................................19 ..................19 BS 4540 ..................... ............................................ .........................................19 ..................19 BS 4585 ..................... ............................................ .........................................19 ..................19 BS 5072 ..................... ............................................ .........................................20 ..................20 BS 5266 ..................... ............................................ ...........................................8 ....................8 BS 5655 ..................... ............................................ .........................................17 ..................17 BS 5724 ..................... ............................................ .........................................18 ..................18 BS 6057 ....................... .............................................. .................................12, ..........12, 18 BS 6088 ..................... ............................................ .........................................17 ..................17 BS 6282 ..................... ............................................ .........................................18 ..................18 BS 6607 ..................... ............................................ .........................................20 ..................20 BS 6902 ....................... .............................................. .................................11, ..........11, 18 BS 6916 ....................... .............................................. .................................12, ..........12, 19 BS 7020 ..................... ............................................ .........................................20 ..................20 BS 7083 ..................... ............................................ .........................................17 ..................17 BS 7288 ..................... ............................................ .........................................16 ..................16 BS 7412 ..................... ............................................ .........................................19 ..................19 BS 7445 ..................... ............................................ .........................................16 ..................16 BS 7745 ..................... ............................................ .........................................20 ..................20 BS 8100 ..................... ............................................ .........................................16 ..................16 BS 8110 ..................... ............................................ .........................................18 ..................18 BS 8493 ..................... ............................................ ...........................................8 ....................8 BS 25999 ....................... .............................................. .......................................8 ................8 BS 31100 ....................... .............................................. .......................................8 ................8 BIP 0026 .................... ........................................... .........................................15 ..................15 BIP 0096 .................... ........................................... .........................................15 ..................15 BIP 2034 .................... ........................................... .........................................15 ..................15 BIP 2082 .................... ........................................... .........................................15 ..................15


BIP 2139 ....................... .............................................. ......................................15 ...............15 BIP 2181 ....................... .............................................. ......................................15 ...............15 DD 213 ..................... ............................................ ..........................................18 ...................18 DD CEN/TS 15053 ....................... .............................................. .......................17 17 DD CEN ISO/TS 21432 ..................... ........................................17 ...................17 DD CEN ISO/TS 27687 ..................... ........................................14 ...................14 BS EN ISO 105 ..................... ............................................ ...............................20 ........20 BS EN ISO 150 ..................... ............................................ ...............................20 ........20 BS EN 444 .................... ........................................... ......................................16 ...............16 BS EN 462 .................... ........................................... ......................................16 ...............16 BS EN 583 .................... ........................................... ......................................16 ...............16 BS EN 589 .................... ........................................... ........................................8 .................8 BS EN ISO 648 ....................... .............................................. .........................8, ..8, 18 BS EN 725 .................... ........................................... ........................................8 .................8 BS EN ISO 787 ..................... ............................................ ...............................20 ........20 BS EN 927 .................... ........................................... ........................................8 .................8 BS EN 975 .................... ........................................... ......................................20 ...............20 BS EN 1018 ...................... ............................................. ....................................8 .............8 BS EN 1019 ...................... ............................................. ....................................8 .............8 BS EN 1116 ...................... ............................................. ..................................20 ...........20 BS EN 1124 ...................... ............................................. ....................................8 .............8 BS EN 1177 ...................... ............................................. ....................................8 .............8 BS EN ISO 1248 ....................... .............................................. ...........................20 ....20 BS EN 1301 ...................... ............................................. ..................................10 ...........10 BS EN 1330 ...................... ............................................. ..................................16 ...........16 BS EN 1518 ...................... ............................................. ..................................16 ...........16 BS EN 1591 ...................... ............................................. ..................................10 ...........10 BS EN 1593 ...................... ............................................. ..................................16 ...........16 BS EN 1715 ...................... ............................................. ..................................10 ...........10 BS EN 1779 ...................... ............................................. ..................................16 ...........16 BS EN 1917 ...................... ............................................. ..................................15 ...........15 BS EN 1957 ...................... ............................................. ..................................20 ...........20 BS EN ISO 2342 ....................... .............................................. ...........................16 ....16 BS EN ISO 2360 ....................... .............................................. ...........................20 ....20 BS EN ISO 3175 ....................... .............................................. ...........................20 ....20 BS EN ISO 3262 ....................... .............................................. ...........................20 ....20 BS EN ISO 3382 ....................... .............................................. ...........................10 ....10 BS EN ISO 3452 ....................... .............................................. ...........................16 ....16 BS EN ISO 3953 ....................... .............................................. ...........................20 ....20 BS EN ISO 4026 ....................... .............................................. ...........................16 ....16 BS EN ISO 4027 ....................... .............................................. ...........................16 ....16 BS EN ISO 4028 ....................... .............................................. ...........................16 ....16 BS EN ISO 4029 ....................... .............................................. ...........................16 ....16 BS EN ISO 4126 ....................... .............................................. ...........................20 ....20 BS EN ISO 4618 ....................... .............................................. ...........................20 ....20 BS EN ISO 4684 ....................... .............................................. ...........................20 ....20 BS EN ISO 4934 ....................... .............................................. ...........................20 ....20 BS EN ISO 6401 ....................... .............................................. ...........................10 ....10 BS EN ISO 7048 ....................... .............................................. ...........................16 ....16 BS EN ISO 8502 ....................... .............................................. ...........................18 ....18 BS EN ISO 10081 ..................... ....................................15, ...............15, 19, 20 BS EN ISO 10664 ..................... ............................................ ...........................16 ....16 BS EN ISO 10806 ..................... ............................................ ...........................20 ....20 BS EN ISO 10931 ..................... ............................................ ...........................21 ....21 BS EN ISO 11890 ..................... ............................................ ...........................10 ....10 BS EN 12223 ....................... .............................................. ...............................16 ........16 BS EN 12273 ....................... .............................................. ...............................10 ........10 BS EN 12409 ....................... .............................................. ...............................10 ........10 BS EN 12421 ....................... .............................................. ...............................16 ........16 BS EN 12475 ....................... .............................................. ...............................19 ........19 BS EN 12543 ....................... .............................................. ...............................16 ........16 BS EN 12544 ..................... ............................................. ...........................16, ...16, 17 BS EN 12563 ..................... ............................................. ...........................11, ...11, 19 BS EN 12679 ....................... .............................................. ...............................17 ........17 BS EN 12808 ....................... .............................................. ...............................10 ........10 BS EN 12882 ....................... .............................................. ...............................10 ........10 BS EN 12911 ....................... .............................................. ...............................10 ........10 BS EN 13068 ....................... .............................................. ...............................17 ........17 BS EN 13348 ....................... .............................................. ...............................10 ........10 BS EN 13721 ....................... .............................................. ...............................21 ........21

5

British Standards – Quick Reference Guide continued... Health and environment BS 5724 ....................... .............................................. .......................................18 ................18 BS 6902 ........................................................11, ........................................................11, 18 BS 7445 ....................... .............................................. .......................................16 ................16 BS EN ISO 3382 ...................... ............................................. ............................10 .....10 BS EN 12563 .................... ........................................... ............................11, .....11, 19 BS EN 15004 .................... ........................................... ............................11, .....11, 19 BS EN 15446 ...................... ............................................. ................................11 .........11 BS EN ISO 21535 ...................... ..........................................11 ....................11,, 19 BS EN 45502 .................... ........................................... ............................11, .....11, 18 BS EN 60601 ...................... ............................................. ................................18 .........18 BS ISO 5667 ....................... .............................................. ................................12 .........12 BS ISO 14520 ....................... .............................................. ........................11, .11, 19

Information systems BS 7083 ....................... .............................................. .......................................17 ................17 BS EN ISO 18104 .................... ........................................... ............................21 .....21 BS EN ISO 19112 .................... ........................................... ............................21 .....21 BS EN ISO 19133 .................... ........................................... ............................21 .....21 BS EN ISO 19135 .................... ........................................... ............................21 .....21 BS ISO/IEC 7816 ..................... ............................................ ............................23 .....23 BS ISO/IEC 11694 ....................... .............................................. ........................14 .14 BS ISO/IEC 13249 ....................... .............................................. ........................23 .23 BS ISO 19128 ..................... ............................................ ................................24 .........24 PD ISO/IEC TR 90005 ...................... ..........................................14 ....................14

Materials and chemicals BS 1583 ..........................................................8, ..........................................................8, 18 BS 3483 ........................................................19, ........................................................19, 20 BS 5072 ....................... .............................................. .......................................20 ................20 BS 6057 ........................................................12, ........................................................12, 18 DD CEN ISO/TS 27687 ....................... ........................................14 .................14 BS EN ISO 105 .................... ........................................... ................................20 .........20 BS EN ISO 150 .................... ........................................... ................................20 .........20 BS EN 589 ...................... .............................................. ......................................8 ..............8 BS EN ISO 648 ...................... ............................................. ..........................8, ...8, 18 BS EN 725 ...................... .............................................. ......................................8 ..............8 BS EN ISO 787 .................... ........................................... ................................20 .........20 BS EN 927 ...................... .............................................. ......................................8 ..............8 BS EN 1018 .................... ............................................ ......................................8 ..............8 BS EN 1019 .................... ............................................ ......................................8 ..............8 BS EN ISO 1248 ...................... ............................................. ............................20 .....20 BS EN ISO 2360 ...................... ............................................. ............................20 .....20 BS EN ISO 3175 ...................... ............................................. ............................20 .....20 BS EN ISO 3262 ...................... ............................................. ............................20 .....20 BS EN ISO 4618 ...................... ............................................. ............................20 .....20 BS EN ISO 4684 ...................... ............................................. ............................20 .....20 BS EN ISO 6401 ...................... ............................................. ............................10 .....10 BS EN ISO 8502 ...................... ............................................. ............................18 .....18 BS EN ISO 10081 .................... ....................................15, ................15, 19, 20 BS EN ISO 10931 .................... ........................................... ............................21 .....21 BS EN ISO 11890 .................... ........................................... ............................10 .....10 BS EN 12475 ...................... ............................................. ................................19 .........19 BS EN 12882 ...................... ............................................. ................................10 .........10 BS EN 12911 ...................... ............................................. ................................10 .........10 BS EN ISO 14419 .................... ........................................... ............................21 .....21 BS EN ISO 15236 .................... ........................................... ............................21 .....21 BS EN 15688 ...................... ............................................. ................................11 .........11 BS EN ISO 15732 .................... ........................................... ............................21 .....21 BS EN ISO 15874 .................... ........................................... ............................21 .....21 BS EN ISO 15875 .................... ........................................... ............................21 .....21 BS EN ISO 15876 .................... ........................................... ............................21 .....21 BS EN ISO 17834 .................... ........................................... ............................21 .....21 BS EN ISO 18756 .................... ........................................... ............................21 .....21 BS EN ISO 18757 .................... ........................................... ............................21 .....21 BS EN ISO 19954 .................... ........................................... ............................21 .....21 BS EN ISO 21178 .................... ........................................... ............................21 .....21 BS EN ISO 21179 .................... ........................................... ............................21 .....21 BS EN ISO 21180 .................... ........................................... ............................21 .....21


BS EN ISO 21181 ....................... .............................................. .........................22 ..22 BS EN ISO 21182 ....................... .............................................. .........................22 ..22 BS EN ISO 21183 ....................... .............................................. .........................22 ..22 DD ENV 927 ...................... ............................................. ...................................8 ............8 BS ISO 124 ...................... ............................................. .............................12, ......12, 18 BS ISO 1170 ...................... ............................................. .................................12 ..........12 BS ISO 1505 ...................... ............................................. .................................22 ..........22 BS ISO 2385 ...................... ............................................. .................................22 ..........22 BS ISO 6743 ...................... ............................................. .................................22 ..........22 BS ISO 8007 ...................... ............................................. .................................23 ..........23 BS ISO 8008 ...................... ............................................. .................................23 ..........23 BS ISO 9276 ...................... ............................................. .................................12 ..........12 BS ISO 9588 ...................... ............................................. .................................12 ..........12 BS ISO 9947 ...................... ............................................. .................................23 ..........23 BS ISO 10059 .................... ........................................... .................................23 ..........23 BS ISO 10458 .................... ........................................... .................................23 ..........23 BS ISO 10952 .................... ........................................... .................................12 ..........12 BS ISO 14595 .................... ........................................... .................................17 ..........17 BS ISO 15112 .................... ........................................... .................................14 ..........14 BS ISO 15237 .................... ........................................... .................................23 ..........23 BS ISO 15238 .................... ........................................... .................................23 ..........23 BS ISO 15970 .................... ........................................... .................................14 ..........14 BS ISO 17455 .................... ........................................... .................................24 ..........24 BS ISO 17470 .................... ........................................... .................................17 ..........17 BS ISO 18114 .................... ........................................... .................................17 ..........17 BS ISO 18573 .................... ........................................... .................................24 ..........24 BS ISO 19334 .................... ........................................... .................................24 ..........24 BS ISO 20203 .................... ........................................... .................................24 ..........24 BS ISO 20508 .................... ........................................... .................................24 ..........24 BS ISO 22029 .................... ........................................... .................................24 ..........24 BS ISO 22493 .................... ........................................... .................................14 ..........14 BS ISO 23380 .................... ........................................... .................................14 ..........14 PD ISO/TR 11150 ....................... .............................................. .........................14 ..14

Alpha-numeric sequence sequence of British Standards quoted in this issue BS 598 ..................... ............................................ .....................................15, ..............15, 18 BS 697 ....................... .............................................. .........................................17 ..................17 BS 969 ....................... .............................................. ...........................................8 ....................8 BS 1583 ....................... .............................................. ...................................8, ............8, 18 BS 3483 ....................... .............................................. .................................19, ..........19, 20 BS 4211 ..................... ............................................ .........................................15 ..................15 BS 4361 ..................... ............................................ .........................................19 ..................19 BS 4540 ..................... ............................................ .........................................19 ..................19 BS 4585 ..................... ............................................ .........................................19 ..................19 BS 5072 ..................... ............................................ .........................................20 ..................20 BS 5266 ..................... ............................................ ...........................................8 ....................8 BS 5655 ..................... ............................................ .........................................17 ..................17 BS 5724 ..................... ............................................ .........................................18 ..................18 BS 6057 ....................... .............................................. .................................12, ..........12, 18 BS 6088 ..................... ............................................ .........................................17 ..................17 BS 6282 ..................... ............................................ .........................................18 ..................18 BS 6607 ..................... ............................................ .........................................20 ..................20 BS 6902 ....................... .............................................. .................................11, ..........11, 18 BS 6916 ....................... .............................................. .................................12, ..........12, 19 BS 7020 ..................... ............................................ .........................................20 ..................20 BS 7083 ..................... ............................................ .........................................17 ..................17 BS 7288 ..................... ............................................ .........................................16 ..................16 BS 7412 ..................... ............................................ .........................................19 ..................19 BS 7445 ..................... ............................................ .........................................16 ..................16 BS 7745 ..................... ............................................ .........................................20 ..................20 BS 8100 ..................... ............................................ .........................................16 ..................16 BS 8110 ..................... ............................................ .........................................18 ..................18 BS 8493 ..................... ............................................ ...........................................8 ....................8 BS 25999 ....................... .............................................. .......................................8 ................8 BS 31100 ....................... .............................................. .......................................8 ................8 BIP 0026 .................... ........................................... .........................................15 ..................15 BIP 0096 .................... ........................................... .........................................15 ..................15 BIP 2034 .................... ........................................... .........................................15 ..................15 BIP 2082 .................... ........................................... .........................................15 ..................15


BIP 2139 ....................... .............................................. ......................................15 ...............15 BIP 2181 ....................... .............................................. ......................................15 ...............15 DD 213 ..................... ............................................ ..........................................18 ...................18 DD CEN/TS 15053 ....................... .............................................. .......................17 17 DD CEN ISO/TS 21432 ..................... ........................................17 ...................17 DD CEN ISO/TS 27687 ..................... ........................................14 ...................14 BS EN ISO 105 ..................... ............................................ ...............................20 ........20 BS EN ISO 150 ..................... ............................................ ...............................20 ........20 BS EN 444 .................... ........................................... ......................................16 ...............16 BS EN 462 .................... ........................................... ......................................16 ...............16 BS EN 583 .................... ........................................... ......................................16 ...............16 BS EN 589 .................... ........................................... ........................................8 .................8 BS EN ISO 648 ....................... .............................................. .........................8, ..8, 18 BS EN 725 .................... ........................................... ........................................8 .................8 BS EN ISO 787 ..................... ............................................ ...............................20 ........20 BS EN 927 .................... ........................................... ........................................8 .................8 BS EN 975 .................... ........................................... ......................................20 ...............20 BS EN 1018 ...................... ............................................. ....................................8 .............8 BS EN 1019 ...................... ............................................. ....................................8 .............8 BS EN 1116 ...................... ............................................. ..................................20 ...........20 BS EN 1124 ...................... ............................................. ....................................8 .............8 BS EN 1177 ...................... ............................................. ....................................8 .............8 BS EN ISO 1248 ....................... .............................................. ...........................20 ....20 BS EN 1301 ...................... ............................................. ..................................10 ...........10 BS EN 1330 ...................... ............................................. ..................................16 ...........16 BS EN 1518 ...................... ............................................. ..................................16 ...........16 BS EN 1591 ...................... ............................................. ..................................10 ...........10 BS EN 1593 ...................... ............................................. ..................................16 ...........16 BS EN 1715 ...................... ............................................. ..................................10 ...........10 BS EN 1779 ...................... ............................................. ..................................16 ...........16 BS EN 1917 ...................... ............................................. ..................................15 ...........15 BS EN 1957 ...................... ............................................. ..................................20 ...........20 BS EN ISO 2342 ....................... .............................................. ...........................16 ....16 BS EN ISO 2360 ....................... .............................................. ...........................20 ....20 BS EN ISO 3175 ....................... .............................................. ...........................20 ....20 BS EN ISO 3262 ....................... .............................................. ...........................20 ....20 BS EN ISO 3382 ....................... .............................................. ...........................10 ....10 BS EN ISO 3452 ....................... .............................................. ...........................16 ....16 BS EN ISO 3953 ....................... .............................................. ...........................20 ....20 BS EN ISO 4026 ....................... .............................................. ...........................16 ....16 BS EN ISO 4027 ....................... .............................................. ...........................16 ....16 BS EN ISO 4028 ....................... .............................................. ...........................16 ....16 BS EN ISO 4029 ....................... .............................................. ...........................16 ....16 BS EN ISO 4126 ....................... .............................................. ...........................20 ....20 BS EN ISO 4618 ....................... .............................................. ...........................20 ....20 BS EN ISO 4684 ....................... .............................................. ...........................20 ....20 BS EN ISO 4934 ....................... .............................................. ...........................20 ....20 BS EN ISO 6401 ....................... .............................................. ...........................10 ....10 BS EN ISO 7048 ....................... .............................................. ...........................16 ....16 BS EN ISO 8502 ....................... .............................................. ...........................18 ....18 BS EN ISO 10081 ..................... ....................................15, ...............15, 19, 20 BS EN ISO 10664 ..................... ............................................ ...........................16 ....16 BS EN ISO 10806 ..................... ............................................ ...........................20 ....20 BS EN ISO 10931 ..................... ............................................ ...........................21 ....21 BS EN ISO 11890 ..................... ............................................ ...........................10 ....10 BS EN 12223 ....................... .............................................. ...............................16 ........16 BS EN 12273 ....................... .............................................. ...............................10 ........10 BS EN 12409 ....................... .............................................. ...............................10 ........10 BS EN 12421 ....................... .............................................. ...............................16 ........16 BS EN 12475 ....................... .............................................. ...............................19 ........19 BS EN 12543 ....................... .............................................. ...............................16 ........16 BS EN 12544 ..................... ............................................. ...........................16, ...16, 17 BS EN 12563 ..................... ............................................. ...........................11, ...11, 19 BS EN 12679 ....................... .............................................. ...............................17 ........17 BS EN 12808 ....................... .............................................. ...............................10 ........10 BS EN 12882 ....................... .............................................. ...............................10 ........10 BS EN 12911 ....................... .............................................. ...............................10 ........10 BS EN 13068 ....................... .............................................. ...............................17 ........17 BS EN 13348 ....................... .............................................. ...............................10 ........10 BS EN 13721 ....................... .............................................. ...............................21 ........21

5

Alpha-numeric Sequence of British Standards continued... BS EN 13722 .................... ........................................... ..................................21 ...........21 BS EN 13757 .................... ........................................... ..................................10 ...........10 BS EN ISO 13789 ...................... ............................................. ..........................10 ...10 BS EN 13802 .................... ........................................... ..................................21 ...........21 BS EN 13925 .................... ........................................... ..................................17 ...........17 BS EN 13927 .................... ........................................... ..................................17 ...........17 BS EN 13957 .................... ........................................... ..................................10 ...........10 BS EN 13958 .................... ........................................... ..................................11 ...........11 BS EN 13959 ...................... ............................................. ..........................15, ...15, 18 BS EN 13990 .................... ........................................... ..................................21 ...........21 BS EN 14073 .................... ........................................... ..................................21 ...........21 BS EN 14074 .................... ........................................... ..................................21 ...........21 BS EN 14076 .................... ........................................... ..................................21 ...........21 BS EN 14096 .................... ........................................... ..................................17 ...........17 BS EN 14218 .................... ........................................... ..................................17 ...........17 BS EN 14219 .................... ........................................... ..................................17 ...........17 BS EN 14317 .................... ........................................... ..................................11 ...........11 BS EN ISO 14419 ...................... ............................................. ..........................21 ...21 BS EN 14451 ...................... ............................................. ..........................15, ...15, 18 BS EN ISO 14935 ...................... ............................................. ..........................21 ...21 BS EN 15004 ...................... ............................................. ..........................11, ...11, 19 BS EN ISO 15065 ...................... ............................................. ..........................17 ...17 BS EN 15093 .................... ........................................... ..................................11 ...........11 BS EN 15094 .................... ........................................... ..................................11 ...........11 BS EN ISO 15236 ...................... ............................................. ..........................21 ...21 BS EN 15272 .................... ........................................... ..................................11 ...........11 BS EN 15446 .................... ........................................... ..................................11 ...........11 BS EN 15570 .................... ........................................... ..................................11 ...........11 BS EN 15603 .................... ........................................... ..................................11 ...........11 BS EN 15688 .................... ........................................... ..................................11 ...........11 BS EN ISO 15732 ...................... ............................................. ..........................21 ...21 BS EN ISO 15874 ...................... ............................................. ..........................21 ...21 BS EN ISO 15875 ...................... ............................................. ..........................21 ...21 BS EN ISO 15876 ...................... ............................................. ..........................21 ...21 BS EN ISO 16047 ...................... ............................................. ..........................17 ...17 BS EN ISO 17834 ...................... ............................................. ..........................21 ...21 BS EN ISO 18104 ...................... ............................................. ..........................21 ...21 BS EN ISO 18756 ...................... ............................................. ..........................21 ...21 BS EN ISO 18757 ...................... ............................................. ..........................21 ...21 BS EN ISO 19112 ...................... ............................................. ..........................21 ...21 BS EN ISO 19133 ...................... ............................................. ..........................21 ...21 BS EN ISO 19135 ...................... ............................................. ..........................21 ...21 BS EN ISO 19954 ...................... ............................................. ..........................21 ...21 BS EN ISO 20783 ...................... ............................................. ..........................21 ...21 BS EN ISO 21178 ...................... ............................................. ..........................21 ...21 BS EN ISO 21179 ...................... ............................................. ..........................21 ...21 BS EN ISO 21180 ...................... ............................................. ..........................21 ...21 BS EN ISO 21181 ...................... ............................................. ..........................22 ...22 BS EN ISO 21182 ...................... ............................................. ..........................22 ...22 BS EN ISO 21183 ...................... ............................................. ..........................22 ...22 BS EN ISO 21535 .................... ..........................................1 ......................11, 1, 19 BS EN ISO 21670 ...................... ............................................. ..........................17 ...17 BS EN ISO 23953 ...................... ............................................. ..........................22 ...22 BS EN 25580 .................... ........................................... ..................................17 ...........17 BS EN 45502 ...................... ............................................. ..........................11, ...11, 18 BS EN 60065 .................... ........................................... ..................................19 ...........19 BS EN 60076 .................... ........................................... ..................................11 ...........11 BS EN 60255 .................... ........................................... ..................................11 ...........11 BS EN 60289 .................... ........................................... ..................................11 ...........11 BS EN 60317 .................... ........................................... ..................................11 ...........11 BS EN 60491 .................... ........................................... ..................................19 ...........19 BS EN 60601 .................... ........................................... ..................................18 ...........18 BS EN 60730 ...................... ............................................. ..........................11, ...11, 19 BS EN 61300 .................... ........................................... ..................................12 ...........12 BS EN 61754 .................... ........................................... ..................................12 ...........12 BS EN 61810 .................... ........................................... ..................................19 ...........19 BS EN 61970 .................... ........................................... ..................................12 ...........12 BS EN 61996 .................... ........................................... ..................................12 ...........12 BS EN 62031 .................... ........................................... ..................................12 ...........12 DD ENV 927 ..................... ............................................ ....................................8 .............8

6

DD ENV 1591 ...................... ............................................. ...............................10 ........10 DD ENV 14464 .................... ........................................... ...............................21 ........21 BS ISO 5 ...................... ............................................. .......................................22 ................22 BS ISO 76 .................... ........................................... .......................................22 ................22 BS ISO 113 ...................... ............................................. ...................................22 ............22 BS ISO 124 .................... ........................................... ...............................12, ........12, 18 BS ISO 155 ...................... ............................................. ...................................22 ............22 BS ISO 199 ...................... ............................................. ...................................22 ............22 BS ISO 254 ...................... ............................................. ...................................22 ............22 BS ISO 461 ...................... ............................................. ...................................17 ............17 BS ISO 762 ...................... ............................................. ...................................22 ............22 BS ISO 763 ...................... ............................................. ...................................22 ............22 BS ISO 855 ...................... ............................................. ...................................22 ............22 BS ISO 1122 .................... ........................................... ...................................22 ............22 BS ISO 1170 .................... ........................................... ...................................12 ............12 BS ISO 1505 .................... ........................................... ...................................22 ............22 BS ISO 1919 .................... ........................................... ...................................22 ............22 BS ISO 2173 .................... ........................................... ...................................22 ............22 BS ISO 2240 .................... ........................................... ...................................22 ............22 BS ISO 2344 .................... ........................................... ...................................22 ............22 BS ISO 2385 .................... ........................................... ...................................22 ............22 BS ISO 2534 .................... ........................................... ...................................22 ............22 BS ISO 2704 .................... ........................................... ...................................22 ............22 BS ISO 3519 .................... ........................................... ...................................22 ............22 BS ISO 3761 .................... ........................................... ...................................22 ............22 BS ISO 4010 .................... ........................................... ...................................22 ............22 BS ISO 4126 .................... ........................................... ...................................12 ............12 BS ISO 4411 .................... ........................................... ...................................12 ............12 BS ISO 5389 .................... ........................................... ...................................22 ............22 BS ISO 5391 .................... ........................................... ...................................22 ............22 BS ISO 5667 .................... ........................................... ...................................12 ............12 BS ISO 6264 .................... ........................................... ...................................22 ............22 BS ISO 6535 ...................... ............................................. ...........................12, ....12, 19 BS ISO 6621 .................... ........................................... ...................................22 ............22 BS ISO 6622 .................... ........................................... ...................................22 ............22 BS ISO 6624 .................... ........................................... ...................................22 ............22 BS ISO 6743 .................... ........................................... ...................................22 ............22 BS ISO 6966 .................... ........................................... ...................................23 ............23 BS ISO 6968 .................... ........................................... ...................................23 ............23 BS ISO 7063 .................... ........................................... ...................................23 ............23 BS ISO 7146 .................... ........................................... ...................................12 ............12 BS ISO 7654 .................... ........................................... ...................................23 ............23 BS ISO/IEC 7816 ...................... ............................................. ...........................23 ....23 BS ISO 8007 .................... ........................................... ...................................23 ............23 BS ISO 8008 .................... ........................................... ...................................23 ............23 BS ISO 8404 .................... ........................................... ...................................23 ............23 BS ISO 8443 .................... ........................................... ...................................23 ............23 BS ISO 8899 .................... ........................................... ...................................23 ............23 BS ISO 8900 .................... ........................................... ...................................23 ............23 BS ISO 9276 .................... ........................................... ...................................12 ............12 BS ISO 9588 .................... ........................................... ...................................12 ............12 BS ISO 9848 .................... ........................................... ...................................23 ............23 BS ISO 9947 .................... ........................................... ...................................23 ............23 BS ISO 9981 .................... ........................................... ...................................23 ............23 BS ISO 9982 .................... ........................................... ...................................23 ............23 BS ISO 10054 ...................... ............................................. ...............................23 ........23 BS ISO 10059 ...................... ............................................. ...............................23 ........23 BS ISO 10129 ...................... ............................................. ...............................12 ........12 BS ISO 10458 ...................... ............................................. ...............................23 ........23 BS ISO 10952 ...................... ............................................. ...............................12 ........12 BS ISO 11500 ...................... ............................................. ...............................12 ........12 BS ISO/IEC 11694 ....................... .............................................. ........................14 .14 BS ISO 11901 ...................... ............................................. ...............................23 ........23 BS ISO 12140 ...................... ............................................. ...............................23 ........23 BS ISO 12745 ...................... ............................................. ...............................14 ........14 BS ISO 13203 ...................... ............................................. ...............................23 ........23 BS ISO/IEC 13249 ....................... .............................................. ........................23 .23 BS ISO 13357 ...................... ............................................. ...............................23 ........23 BS ISO 13556 ...................... ............................................. ...............................23 ........23 BS ISO 14469 ...................... ............................................. ...............................23 ........23


BS ISO 14520 ...................... ............................................. .........................11, ..11, 19 BS ISO 14595 .................... ........................................... .................................17 ..........17 BS ISO 14681 .................... ........................................... .................................23 ..........23 BS ISO 14717 .................... ........................................... .................................14 ..........14 BS ISO 14794 .................... ........................................... .................................23 ..........23 BS ISO 15112 .................... ........................................... .................................14 ..........14 BS ISO 15237 .................... ........................................... .................................23 ..........23 BS ISO 15238 .................... ........................................... .................................23 ..........23 BS ISO 15312 .................... ........................................... .................................23 ..........23 BS ISO 15970 .................... ........................................... .................................14 ..........14 BS ISO 16067 .................... ........................................... .................................23 ..........23 BS ISO 16212 .................... ........................................... .................................14 ..........14 BS ISO 16860 .................... ........................................... .................................23 ..........23 BS ISO 16915 .................... ........................................... .................................23 ..........23 BS ISO 17080 .................... ........................................... .................................23 ..........23 BS ISO 17455 .................... ........................................... .................................24 ..........24 BS ISO 17470 .................... ........................................... .................................17 ..........17 BS ISO 17559 .................... ........................................... .................................24 ..........24 BS ISO 17584 .................... ........................................... .................................24 ..........24 BS ISO 18084 .................... ........................................... .................................24 ..........24 BS ISO 18114 .................... ........................................... .................................17 ..........17 BS ISO 18573 .................... ........................................... .................................24 ..........24 BS ISO 18653 .................... ........................................... .................................24 ..........24 BS ISO 18929 .................... ........................................... .................................24 ..........24 BS ISO 18938 .................... ........................................... .................................14 ..........14 BS ISO 19128 .................... ........................................... .................................24 ..........24 BS ISO 19334 .................... ........................................... .................................24 ..........24 BS ISO 19438 .................... ........................................... .................................24 ..........24 BS ISO 20203 .................... ........................................... .................................24 ..........24 BS ISO 20462 .................... ........................................... .................................24 ..........24 BS ISO 20508 .................... ........................................... .................................24 ..........24 BS ISO 21009 .................... ........................................... .................................14 ..........14 BS ISO 21093 .................... ........................................... .................................24 ..........24 BS ISO 21390 .................... ........................................... .................................24 ..........24 BS ISO 22029 .................... ........................................... .................................24 ..........24 BS ISO 22234 .................... ........................................... .................................24 ..........24 BS ISO 22493 .................... ........................................... .................................14 ..........14 BS ISO 23380 .................... ........................................... .................................14 ..........14 BS ISO 24347 .................... ........................................... .................................24 ..........24 BS ISO 26322 .................... ........................................... .................................14 ..........14 BS ISO 29470 .................... ........................................... .................................14 ..........14 BS IEC 60870 ..................... ............................................ .................................14 ..........14 DD IEC/PAS 62396 ..................... ............................................ .........................14 ..14 DD IEC/PAS 62588 ..................... ............................................ .........................14 ..14 DD IEC/TS 62396 ....................... .............................................. .........................14 ..14 PD CEN/TR 15728 ...................... ............................................. .........................14 ..14 PD ISO/TR 11150 ....................... .............................................. .........................14 ..14 PD ISO/IEC TR 90005 ..................... ..........................................1 .....................14 4 BS 2A 296 ...................... ............................................. ....................................24 .............24 BS A 305 .................... ........................................... ........................................24 .................24 BS 4G 173 ...................... ............................................. ....................................24 .............24 BS 2G 219 ...................... ............................................. ....................................24 .............24 BS 2M 52 ....................... .............................................. ....................................24 .............24 BS M 55 ..................... ............................................ ........................................24 .................24 BS M 57 ..................... ............................................ ........................................24 .................24 BS M 61 ..................... ............................................ ........................................24 .................24 BS M 66 ..................... ............................................ ........................................24 .................24 BS HC 404 ...................... ............................................. ....................................18 .............18 BS 3SP 89 ....................... .............................................. ....................................24 .............24 BS AU 259 ...................... ............................................. ....................................24 .............24 PAS 67 .................... ........................................... ............................................1 .....................15 5 PAS 220 ...................... ............................................. ........................................15 .................15


British Standards

BRITISH STANDARDS The following British Standard publications are available from BSI Customer Services (see (see ’How to order’ on page 2). The publications listed below are new and revised British Standards that were made available last month. An existing BSI publication bearing bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the ’British Standards withdrawn’ section. BRITISH STANDARD IMPLEMENTATIONS WILL BE SUPPLIED IN PREFERENCE TO EUROPEAN OR INTERNA INTERNATIONAL TIONAL STANDARDS, UNLESS OTHERWISE REQUESTED.

BS 25999:—

BS EN 927:—

Business continuity management

Paints and varnishes. Coating materials and coating systems for exterior wood

BS 25999-1:2006 (German) Code of practice (German translation of BS 2599 25999-1:2 9-1:2006) 006)

BS EN 927-2:2006

no current standard is superseded ISBN 978 0 580 62938 9 £50.00 members, £100.00 non-members

supersedess DD ENV 927supersede 927-2:20 2:2000 00 ISBN 978 0 580 56014 9 £40.00 members, £80.00 non-members

BCM/1

STI/28

BS 25999-2:2007 (German)

BS EN 927-3:2006

Specification (German (German translation translation of BS 259992:2007)

Natural weathering test


Performance specification

supersedess BS EN 927supersede 927-3:20 3:2000 00 ISBN 978 0 580 56078 1 £57.00 members, £114.00 non-members STI/28

BCM/1/-/2

BS EN 927-5:2006 BS 31100:2008

Assessment of the liquid water permeability

Risk management. Code of practice

supersedess BS EN 927supersede 927-5:20 5:2000 00 ISBN 978 0 580 56079 8 £40.00 members, £80.00 non-members


STI/28

RM/1

Please order by the British Standard reference not the ISBN number number.. BS 2000 series standards are also available from:– Library of the Energy Institute 61 New Cavendish Street London W1G 7AR Tel: 020 7467 7100 Fax: 020 7255 1472 Email: [email protected] For this series, member pricing is applicable to BSI and Energy Institute Institute members.

BS EN 927-6:2006

BS EN PUBLICATIONS

Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water

The following are British Standard implementations of the English language versions of European Standards (ENs).


BSI has an obligation to publish all ENs ENs and to withdraw any conflicting British Standards. This has led to a series of standards, stand ards, BS ENs, using using the EN number number.. Note: The date referenced in the identifier is the date of the European standard.

STI/28

BS EN 1018:2006 Chemicals used for treatment of water intended for human consumption. Calcium carbonate supersedess BS EN 1018 supersede 1018:199 :1998 8 ISBN 978 0 580 57136 7 £32.00 members, £64.00 non-members CII/59

BS 969:2008 Specification for limits and tolerances on plain limit gauges supersedes BS 969:1982 ISBN 978 0 580 61998 4 £40.00 members, £80.00 non-membe non-members rs TDW/4

BS 5266-10:2008 Guide to the design and provision of emergency lighting to reduce the risks from hazards in the event of failure of the normal lighting supply

BS EN 589:2008

BS EN 1019:2005

Automotive fuels. LPG. Requirements and test methods

Chemicals used for treatment of water intended for human consumption. Sulfur dioxide

supersedes supersed es BS EN 589: 589:2004 2004 ISBN 978 0 580 61256 5 £40.00 members, £80.00 non-members

supersedess BS EN 1019 supersede 1019:199 :1996 6 ISBN 978 0 580 55208 3 £40.00 members, £80.00 non-members

PTI/15

CII/59

BS EN ISO 648:2008

BS EN 1124:—

Laboratory glassware. Single-volume pipettes

Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems

supersedes BS 1583:1986 ISBN 978 0 580 58559 3 £40.00 members, £80.00 non-members


LBI/36/1

CPL/34/9

Advanced technical ceramics. Methods of test for ceramic powders

BS EN 725:—

BS EN 1124-3:2008 System X. Dimensions supersedess BS EN 1124 supersede 1124-3:1 -3:1999 999 ISBN 978 0 580 58014 7 £75.00 members, £150.00 non-members ISE/8

BS 8493:2008

BS EN 725-3:2007 Determination of the oxygen content of Determination nonoxides by thermal extraction with a carrier gas

BS EN 1177:2008

Light reflectance value (LRV) of a surface. Method of test no current standard is superseded ISBN 978 0 580 57517 4 £40.00 members, £80.00 non-membe non-members rs

supersedes supersed es BS EN 725725-3:19 3:1994 94 ISBN 978 0 580 54525 2 £32.00 members, £64.00 non-members

supersedes BS EN 1177:1998 which remains remains current current ISBN 978 0 580 55368 4 £40.00 members, £80.00 non-members

B/559

RPI/13

SW/65

8


Impact attenuating playground surfacing. Determination Determinatio n of critical fall height


BS EN Publications continued... BS EN 1301:—

BS EN ISO 6401:2008

BS EN 12882:2008

Aluminium and aluminium alloys. Drawn wire

Plastics. Poly(vinyl chloride). Determination of residual vinyl chloride monomer. Gaschromatographic method

Conveyor belts for general purpose use. Electrical and flammability safety requirements

BS EN 1301-1:2008

supersedes BS EN ISO 6401:2004 ISBN 978 0 580 57207 4 £32.00 members, £64.00 non-members

Technical conditions for inspection and delivery supersedes BS EN 1301-1:1997 ISBN 978 0 580 56393 5 £32.00 members, £64.00 non-members NFE/35

BS EN 1301-2:2008

NFE/35

BS EN 1301-3:2008

BS EN ISO 11890:—

BS EN 12911:2006

Paints and varnishes. Determination of volatile organic compound (VOC) content

Products used for treatment of water intended for human consumption. Manganese greensand

BS EN ISO 11890-1:2007

supersedes BS EN 12911:1999 ISBN 978 0 580 56080 4 £57.00 members, £114.00 non-members

Difference method supersedes BS EN ISO 11890-1:2001 ISBN 978 0 580 55941 9 £40.00 members, £80.00 non-members

CII/59

STI/10

BS EN 13348:2008

Tolerances on dimensions supersedes BS EN 1301-3:1997 ISBN 978 0 580 56395 9 £32.00 members, £64.00 non-members NFE/35

PRI/67

PRI/21

Mechanical properties supersedes BS EN 1301-2:1997 ISBN 978 0 580 56394 2 £40.00 members, £80.00 non-members


BS EN 12273:2008 Slurry surfacing. Requirements no current standard is superseded ISBN 978 0 580 56940 1 £65.00 members, £130.00 non-members

Copper and copper alloys. Seamless, round copper tubes for medical gases or vacuum supersedes BS EN 13348:2001 ISBN 978 0 580 60508 6 £57.00 members, £114.00 non-members NFE/34/1

B/510/2

BS EN 1591:— Flanges and their joints. Design rules for gasketed circular flange connections

BS EN 1591-2:2008 Gasket parameters supersedes DD ENV 1591-2:2001 ISBN 978 0 580 56594 6 £80.00 members, £160.00 non-members PSE/15

BS EN 12409:2008 Plastics and rubber machines. Thermoforming machines. Safety requirements supersedes BS EN 12409:1999 ISBN 978 0 580 54652 5 £75.00 members, £150.00 non-members MCE/3/2

BS EN 12808:— Grouts for tiles

BS EN 13757:— Communication systems for meters and remote reading of meters

BS EN 13757-6:2008 Local Bus no current standard is superseded ISBN 978 0 580 58232 5 £32.00 members, £64.00 non-members PEL/894

BS EN 1715:— Aluminium and aluminium alloys. Drawing stock

BS EN 1715-1:2008 General requirements and technical conditions for inspection and delivery supersedes BS EN 1715-1:1998 ISBN 978 0 580 57005 6 £40.00 members, £80.00 non-members NFE/35

BS EN 1715-4:2008 Specific requirements for welding applications supersedes BS EN 1715-4:1998 ISBN 978 0 580 57008 7 £32.00 members, £64.00 non-members

BS EN 12808-1:2008 Determination of chemical resistance of reaction resin mortars supersedes BS EN 12808-1:1999 ISBN 978 0 580 63511 3 £32.00 members, £64.00 non-members B/539

BS EN 12808-2:2008 supersedes BS EN 12808-2:2002 ISBN 978 0 580 61257 2 £32.00 members, £64.00 non-members B/539

BS EN 12808-3:2008 Determination of flexural and compressive strength

BS EN ISO 3382:—

supersedes BS EN 12808-3:2002 ISBN 978 0 580 61258 9 £32.00 members, £64.00 non-members

supersedes BS EN ISO 13789:1999 ISBN 978 0 580 54446 0 £57.00 members, £114.00 non-members B/540

BS EN 13957:2008 Aluminium and aluminium alloys. Extruded round, coiled tube for general applications. Specification supersedes BS EN 13957:2003 ISBN 978 0 580 56396 6 £40.00 members, £80.00 non-members NFE/35

B/539

BS EN ISO 3382-2:2008

BS EN 12808-5:2008

Reverberation time in ordinary rooms

Determination of water absorption

partially supersedes BS EN ISO 3382:2000 ISBN 978 0 580 53586 4 £57.00 members, £114.00 non-members

supersedes BS EN 12808-5:2002 ISBN 978 0 580 61259 6 £32.00 members, £64.00 non-members

EH/1/6

B/539

10

Thermal performance of buildings. Transmission and ventilation heat transfer coefficients. Calculation method

Determination of resistance to abrasion

NFE/35

Acoustics. Measurement of room acoustic parameters

BS EN ISO 13789:2007


e-mail your order [email protected]


BS EN 13958:2008

BS EN 15094:2008

BS EN 45502:—

Aluminium and aluminium alloys. Cold drawn, round, coiled tube for general applications. Specification

Safety of machinery. Safety requirements for cold flat rolling mills

Active implantable medical devices


no current standard is superseded ISBN 978 0 580 55205 2 £80.00 members, £160.00 non-members MCE/23

NFE/35

BS EN 14317:—

BS EN 15272:—

Thermal insulation products for buildings. Insitu thermal insulation formed from exfoliated vermiculite (EV) products

Inland navigation vessels. Equipment for rope leading

BS EN 14317-2:2007

BS EN 15272-3:2007

BS EN 45502-2-2:2008 Particular requirements for active implantable medical devices intended to treat tachyarrhythmia (includes implantable defibrillators) supersedes BS 6902-1:1990 and BS 69021:Supplement No. 1:1996 ISBN 978 0 580 53918 3 £90.00 members, £180.00 non-members CH/150/6

Specification for the installed products

Roller fairleads



B/540

SME/32/-/7

BS EN 60076:— Power transformers

BS EN 60076-6:2008 Reactors

BS EN 15004:— Fixed firefighting systems. Gas extinguishing systems

BS EN 15004-7:2008 Physical properties and system design of gas extinguishing systems for IG-01 extinguishant

BS EN 15446:2008 Fugitive and diffuse emissions of common concern to industry sectors. Measurement of fugitive emission of vapours generating from equipment and piping leaks

supersedes BS EN 60289:1995 which remains current ISBN 978 0 580 55392 9 £98.00 members, £196.00 non-members PEL/14


BS EN 60255:—

EH/2/1

Measuring relays and protection equipment

Also available as part of KIT 105.

BS EN 15570:2008

BS EN 60255-22-3:2008

BS EN 15004-8:2008

Hardware for furniture. Strength and durability of hinges and their components. Hinges pivoting on a vertical axis

Electrical disturbance tests. Radiated electromagnetic field immunity

supersedes BS ISO 14520-12:2005 ISBN 978 0 580 59948 4 £32.00 members, £64.00 non-members FSH/18/6

Physical properties and system design of gas extinguishing systems for IG-100 extinguishant supersedes BS ISO 14520-13:2005 ISBN 978 0 580 59949 1 £32.00 members, £64.00 non-members


supersedes BS EN 60255-22-3:2001 ISBN 978 0 580 56752 0 £40.00 members, £80.00 non-members PEL/95

FW/0/1

FSH/18/6


BS EN 15004-9:2008 Physical properties and system design of gas extinguishing systems for IG-55 extinguishant supersedes BS ISO 14520-14:2005 ISBN 978 0 580 59950 7 £40.00 members, £80.00 non-members

BS EN 15603:2008 Energy performance of buildings. Overall energy use and definition of energy ratings no current standard is superseded ISBN 978 0 580 59028 3 £80.00 members, £160.00 non-members B/540

FSH/18/6


BS EN 15004-10:2008 Physical properties and system design of gas extinguishing systems for IG-541 extinguishant supersedes BS ISO 14520-15:2005 ISBN 978 0 580 59951 4 £40.00 members, £80.00 non-members FSH/18/6

BS EN 15688:2008 Fertilizers. Determination of urease inhibitor N-(n-butyl)thiophosphoric triamide (NBPT) using high-performance liquid chromatography (HPLC) no current standard is superseded ISBN 978 0 580 58650 7 £32.00 members, £64.00 non-members

BS EN 60317:— Specifications for particular types of winding wires

BS EN 60317-0-1:2008 General requirements. Enamelled round copper wire supersedes BS EN 60317-0-1:1998 ISBN 978 0 580 56283 9 £57.00 members, £114.00 non-members GEL/55

BS EN 60730:— Automatic electrical controls for household and similar use

CII/37


BS EN 15093:2008

BS EN ISO 21535:2007

BS EN 60730-2-6:2008 Particular requirements for automatic electrical pressure sensing controls including mechanical requirements

Safety of machinery. Safety requirements for hot flat rolling mills

Non-active surgical implants. Joint replacement implants. Specific requirements for hip-joint replacement implants



supersedes BS EN 60730-2-6:1995 which remains current ISBN 978 0 580 54106 3 £57.00 members, £114.00 non-members

MCE/23

CH/150/4

CPL/72



11

BS EN Publications continued... BS EN 61300:— Fibre optic interconnecting devices and passive components. Basic test and measurement procedures

BS EN 61300-2-15:2008 Tests. Torque strength of coupling mechanism supersedes BS EN 61300-2-15:1997 ISBN 978 0 580 57891 5 £32.00 members, £64.00 non-members GEL/86/2

BS IMPLEMENTATIONS BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. Note: The date referenced in the identifier is the date of the international standard.

BS ISO 7146:— Plain bearings. Appearance and characterization of damage to metallic hydrodynamic bearings

BS ISO 7146-1:2008 General no current standard is superseded ISBN 978 0 580 56413 0 £80.00 members, £160.00 non-members MCE/12

BS ISO 7146-2:2008 BS EN 61754:— Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces

BS EN 61754-7:2008 Type MPO connector family supersedes BS EN 61754-7:2005 ISBN 978 0 580 57566 2 £57.00 members, £114.00 non-members GEL/86/2

BS EN 61970:— Energy management system application program interface (EMS-API)

BS ISO 124:2008 Latex, rubber. Determination of total solids content supersedes BS 6057-3.2:1997 ISBN 978 0 580 63390 4 £40.00 members, £80.00 non-members

Cavitation erosion and its countermeasures no current standard is superseded ISBN 978 0 580 56927 2 £57.00 members, £114.00 non-members MCE/12

BS ISO 9276:—

PRI/50

Representation of results of particle size analysis

BS ISO 1170:2008 Coal and coke. Calculation of analyses to different bases no current standard is superseded ISBN 978 0 580 56508 3 £40.00 members, £80.00 non-members PTI/16

BS ISO 9276-6:2008 Descriptive and quantitative representation of particle shape and morphology no current standard is superseded ISBN 978 0 580 57387 3 £65.00 members, £130.00 non-members LBI/37

BS EN 61970-453:2008 CIM based graphics exchange no current standard is superseded ISBN 978 0 580 57135 0 £40.00 members, £80.00 non-members PEL/57

BS EN 61996:— Maritime navigation and radiocommunication equipment and systems. Shipborne voyage data recorder (VDR)

BS EN 61996-1:2008 Voyage data recorder (VDR). Performance requirements, methods of testing and required test results supersedes BS EN 61996:2001 ISBN 978 0 580 55514 5 £80.00 members, £160.00 non-members EPL/80

BS EN 61996-2:2008 Simplified voyage data recorder (S-VDR). Performance requirements, methods of testing and required test results supersedes BS EN 61996-2:2006 ISBN 978 0 580 58402 2 £80.00 members, £160.00 non-members EPL/80

BS ISO 4126:— Safety devices for protection against excessive pressure

BS ISO 4126-9:2008 Application and installation of safety devices excluding stand-alone bursting disc safety devices

BS ISO 9588:2007 Metallic and other inorganic coatings. Postcoating treatments of iron or steel to reduce the risk of hydrogen embrittlement supersedes BS ISO 9588:1999 ISBN 978 0 580 60513 0 £32.00 members, £64.00 non-members


STI/33

PVE/12

Plain bearings. Testing of bearing materials. Resistance to corrosion by lubricants under static conditions

BS ISO 4411:2008 Hydraulic fluid power. Valves. Determination of pressure differential/flow characteristics no current standard is superseded ISBN 978 0 580 58646 0 £40.00 members, £80.00 non-members

BS ISO 10129:2006

no current standard is superseded ISBN 978 0 580 54573 3 £32.00 members, £64.00 non-members MCE/12

MCE/18/-/5

BS ISO 10952:2008

BS ISO 5667:—

Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Determination of the resistance to chemical attack for the inside of a section in deflected condition

Water quality. Sampling

BS ISO 5667-17:2008 Guidance on sampling of bulk suspended solids supersedes BS ISO 5667-17:2000 ISBN 978 0 580 55614 2 £65.00 members, £130.00 non-members

no current standard is superseded ISBN 978 0 580 56900 5 £40.00 members, £80.00 non-members PRI/88/2

EH/3/6

BS ISO 11500:2008

LED modules for general lighting. Safety specifications

BS ISO 6535:2008 Portable chain-saws. Chain brake performance

Hydraulic fluid power. Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle


supersedes BS 6916-5:1988 ISBN 978 0 580 58472 5 £32.00 members, £64.00 non-members

supersedes BS ISO 11500:1997 ISBN 978 0 580 55546 6 £65.00 members, £130.00 non-members

CPL/34/1

AGE/29

MCE/18/-/6

BS EN 62031:2008

12



BS Implementations continued... BS ISO/IEC 11694:—

BS ISO 21009:—

PD CEN/TR 15728:2008

Identification cards. Optical memory cards. Linear recording method

Cryogenic vessels. Static vacuum-insulated vessels

Design and use of inserts for lifting and handling of precast concrete. Elements

BS ISO/IEC 11694-3:2008

BS ISO 21009-1:2008


Optical properties and characteristics

Design, fabrication, inspection and tests

supersedes BS ISO/IEC 11694-3:2001 ISBN 978 0 580 58565 4 £32.00 members, £64.00 non-members


IST/17

PVE/18

BS ISO/IEC 11694-4:2008

BS ISO 22493:2008

Logical data structures supersedes BS ISO/IEC 11694-4:2001 ISBN 978 0 580 58564 7 £57.00 members, £114.00 non-members IST/17

Microbeam analysis. Scanning electron microscopy. Vocabulary no current standard is superseded ISBN 978 0 580 54987 8 £65.00 members, £130.00 non-members

B/524

PD ISO/IEC TR 90005:2008 Systems engineering. Guidelines for the application of ISO 9001 to system life cycle processes no current standard is superseded ISBN 978 0 580 63975 3 £103.00 members, £206.00 non-members IST/15

CII/9

DRAFTS FOR DEVELOPMENT

BS ISO 12745:2008

BS ISO 23380:2008

Copper, lead and zinc ores and concentrates. Precision and bias of mass measurement techniques

Selection methods for the determination of trace elements in coal

DD CEN ISO/TS 27687:2008


Nanotechnologies. Terminology and definitions for nano-objects. Nanoparticle, nanofibre and nanoplate


PTI/16

NFE/36

BS ISO 26322:— BS ISO 14717:2008 Oil of origanum, Spanish type [Coridothymus capitatus (L.) Rchb.f.] no current standard is superseded ISBN 978 0 580 58208 0 £40.00 members, £80.00 non-members AW/54

BS ISO 15112:2007

Tractors for agriculture and forestry. Safety

BS ISO 26322-1:2008 Standard tractors no current standard is superseded ISBN 978 0 580 58317 9 £40.00 members, £80.00 non-members

PTI/15

BS ISO 15970:2008 Natural gas. Measurement of properties. Volumetric properties: density, pressure, temperature and compression factor no current standard is superseded ISBN 978 0 580 58165 6 £80.00 members, £160.00 non-members PTI/15

BS ISO 16212:2008 Cosmetics. Microbiology. Enumeration of yeast and mould no current standard is superseded ISBN 978 0 580 55541 1 £57.00 members, £114.00 non-members

NTI/1

DD IEC/TS 62396:— Process management for avionics. Atmospheric radiation effects

DD IEC/TS 62396-2:2008 Guidelines for single event effects testing for avionics systems

AGE/6

Natural gas. Energy determination no current standard is superseded ISBN 978 0 580 54653 2 £85.00 members, £170.00 non-members


BS ISO 29470:2008 Thermal insulating products for building applications. Determination of the apparent density no current standard is superseded ISBN 978 0 580 58940 9 £40.00 members, £80.00 non-members B/540/8

BS IEC 60870:— Telecontrol equipment and systems

BS IEC 60870-5-6:2006 Guidelines for conformance testing for the IEC 60870-5 companion standards no current standard is superseded ISBN 978 0 580 53893 3 £57.00 members, £114.00 non-members PEL/57

supersedes DD IEC/PAS 62396-2:2007 ISBN 978 0 580 62024 9 £32.00 members, £64.00 non-members GEL/107

DD IEC/TS 62396-3:2008 Optimising system design to accommodate the single event effects (SEE) of atmospheric radiation supersedes DD IEC/PAS 62396-3:2007 ISBN 978 0 580 62278 6 £32.00 members, £64.00 non-members GEL/107

DD IEC/TS 62396-5:2008 Guidelines for assessing thermal neutron fluxes and effects in avionics systems supersedes DD IEC/PAS 62396-5:2007 ISBN 978 0 580 61825 3 £20.00 members, £40.00 non-members GEL/107

CW/217

PUBLISHED DOCUMENTS

BS ISO 18938:2008

PD ISO/TR 11150:2007

Imaging materials. Optical discs. Care and handling for extended storage

Natural gas. Hydrocarbon dew point and hydrocarbon content

Marking and labeling of components, PCBs and PCBAs to identify lead(Pb), Pb-free and other attributes




CPW/42

PTI/15

EPL/501

14


DD IEC/PAS 62588:2008


PUBLICLY AVAILABLE SPECIFICATIONS Publicly Available Specifications (formerly Product Assessment Specifications) are issued to provide an interim document where there is a market need but where a full British or European Standard has yet to be published.

PAS 67:2008 Laboratory tests to determine the heating and electrical performance of heat-led microcogeneration packages primarily intended for heating dwellings no current standard is superseded ISBN 978 0 580 64480 1 £65.00 members, £65.00 non-members

PAS 220:2008 Prerequisite programmes on food safety for food manufacturing no current standard is superseded ISBN 978 0 580 62878 8 £70.00 members, £70.00 non-members

SPECIALIST BOOKS FROM BSI

BIP 2181:2008 Guide to PAS 2050. How to assess the carbon footprint of goods and services no current standard is superseded ISBN 978 0 580 64636 2 £9.95 members, £9.95 non-members

AMENDMENTS TO BRITISH STANDARDS Most amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is re-issued as a new edition (see ’Updated British Standards’). Amendments which make smaller changes or corrections are available on request, free of charge to past purchasers of the standard. All amendments to date of despatch are included within any main publication when ordered for the first time. The following amendments to British Standards were made available last month.

BS EN 1916:2002 Concrete pipes and fittings, unreinforced, steel fibre and reinforced

UPDATED BRITISH STANDARDS The following standards have been amended and the amendments have been incorporated into an updated standard. NOTE: Updated British Standards must be reordered as the amendments are not available separately.

BS 4211:2005+A1:2008 Specification for permanently fixed ladders AMENDMENT 1 £57.00 members, £114.00 non-members B/208

SPECIAL ANNOUNCEMENTS Comments can be sent by email or by post to named contacts at:– BSI Head Office 389 Chiswick High Road London W4 4AL Tel: 020 8996 9000

CORRIGENDUM 1

BIP 0026:2008

BS 598:—

B/505

Sampling and examination of bituminous mixtures for roads and other paved areas

ISO/IEC 27001. Complete ISMS Documentation Toolkit supersedes BIP 0026:2006 £529.00 members, £529.00 non-members VAT is applicable to this item.

BS EN 1917:2002 Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced

BS 598-110:1998

CORRIGENDUM 3

Methods of test for the determination of wheel-tracking rate and depth

B/505

BIP 0096:2007

Also incorporates Corrigenda 1 & 2.

ITIL version 3. Official introduction to the ITIL service lifecycle no current standard is superseded ISBN 978 0113 31061 6 £30.00 members, £30.00 non-members

BS EN ISO 10081:— Classification of dense shaped refractory products

This standard was withdrawn in error and has now been re-instated as the relevant BSI committee reported that there are still users of this standard. Contact: Bernard Williams Email: [email protected] B/510/1

BIP 2034:2008 Disaster and emergency management systems no current standard is superseded ISBN 978 0 580 60710 3 £30.00 members, £30.00 non-members

BS EN ISO 10081-3:2005 Basic products containing from 7% to 50% residual carbon CORRIGENDUM 2 RPI/1

Also incorporates Corrigendum 1.

BIP 2082:2008 Electrician’s Guide to the Building Regulations Part P. 2nd Edition

BS EN 13959:2004

supersedes BIP 2082:2005 ISBN 978 0 86341 862 4 £20.00 members, £20.00 non-members

CORRIGENDUM 1

Anti-pollution check valves. DN 6 to DN 250 inclusive Family E, type A, B, C, and D

BS EN 14451:2005

Principles and practices of business continuity. Tools and techniques

Devices to prevent pollution by backflow of potable water. In-line anti-vacuum valves DN 8 to DN 80. Family D, type A


You! Always quote your Customer Number Don’t know your number?

B/504

BIP 2139:2007

no current standard is superseded ISBN 1 931332 39 8 £55.00 members, £55.00 non-members

Help Us to Help

Contact Customer Services 020 8996 9001 who will be happy to check it for you

CORRIGENDUM 1 B/504


15

British Standards Reviewed and Confirmed

BRITISH STANDARDS REVIEWED AND CONFIRMED It is BSI policy for every standard to be reviewed by the technical committee responsible not more than five years after publication, to establish whether it is still current and, if it is not, to identify and set in hand appropriate action. Confirmation indicates the continuing currency of a standard. Where any standard in this list has been amended since publication, confirmation includes all amendments published to date. Reference to a particular amendment indicates that it is published concurrently with the confirmation.

BS EN 462-4:1995

BS EN ISO 4026:2003

Experimental evaluation of image quality values and image quality tables

Hexagon socket set screws with flat point FME/9/3

WEE/46

BS EN ISO 4027:2003 BS EN 583:—

Hexagon socket set screws with cone point

Non-destructive testing. Ultrasonic examination

FME/9/3

BS EN 583-1:1999

BS EN ISO 4028:2003

General principles

Hexagon socket set screws with dog point

WEE/46

FME/9/3

BS EN 583-5:2001

BS EN ISO 4029:2003

Characterization and sizing of discontinuities

Hexagon socket set screws with cup point

WEE/46

FME/9/3

BS EN 1330:—

BS EN ISO 7048:1999

Non-destructive testing. Terminology

Cross recessed cheese head screws FME/9/3

BS EN 1330-1:1998 BS 7288:1990

List of general terms

BS EN ISO 10664:2005

Specification for socket outlets incorporating residual current devices (S.R.C.D.s)

WEE/46

Hexalobular internal driving feature for bolts and screws

PEL/23

BS EN 1330-2:1998

BS 7445:—

Terms common to the non-destructive testing methods

BS EN 12223:2000

WEE/46

Non-destructive testing. Ultrasonic examination. Specification for calibration block No.1

Description and measurement of environmental noise

FME/9/2

WEE/46

BS 7445-1:2003 Guide to quantities and procedures EH/1/3

BS 8100:— Lattice towers and masts

BS EN 1330-8:1998 Terms used in leak tightness testing WEE/46

BS EN 1330-10:2003

BS EN 12421:1998 Magnesium and magnesium alloys. Unalloyed magnesium NFE/35

Terms used in visual testing WEE/46

BS EN 12543:—

BS EN 1518:1998

Non-destructive testing. Characteristics of focal spots in industrial X-ray systems for use in nondestructive testing

B/525/32

Non-destructive testing. Leak testing. Characterization of mass spectrometer leak detectors

BS EN 12543-1:1999

BS 8100-3:1999

WEE/46

BS 8100-2:1986 Guide to the background and use of Part 1 ’Code of practice for loading’

Code of practice for strength assessment of members of lattice towers and masts B/525/32

BS 8100-4:1995

Scanning method WEE/46

BS EN 1593:1999 Non-destructive testing. Leak testing. Bubble emission techniques WEE/46

BS EN 12543-3:1999 Slit camera radiographic method WEE/46

Code of practice for loading of guyed masts B/525/32

BS EN 444:1994 Non-destructive testing. General principles for radiographic examination of metallic materials by X- and gamma-rays WEE/46

BS EN 462:— Non-destructive testing. Image quality of radiographs

BS EN 1779:1999 Non-destructive testing. Leak testing. Criteria for method and technique selection

BS EN 12543-4:1999 Edge method WEE/46

WEE/46

BS EN 12543-5:1999 BS EN ISO 2342:2003

Measurement of the effective focal spot size of mini and micro focus X-ray tubes

Slotted headless screws with shank

WEE/46

FME/9/1

BS EN ISO 3452:—

BS EN 12544:—

Non-destructive testing. Penetrant testing

Non-destructive testing. Measurement and evaluation of the X-ray tube voltage

Image quality indicators (wire type). Determination of image quality value

BS EN ISO 3452-3:1999

BS EN 12544-1:1999

WEE/46

Reference test blocks

Voltage divider method

WEE/46

WEE/46

Image quality indicators (step/hole type). Determination of image quality value

BS EN ISO 3452-4:1999

BS EN 12544-2:2000

Equipment

Constancy check by the thick filter method

WEE/46

WEE/46

WEE/46

BS EN 462-1:1994

BS EN 462-2:1994

16



BS EN 12544-3:1999

DD CEN/TS 15053:2005

Spectrometric method

Non-destructive testing. Recommendations for discontinuities-types in test specimens for examination

WEE/46

WEE/46

BS EN 12679:2000 Non-destructive testing. Determination of the size of industrial radiographic sources. Radiographic method

BS EN ISO 15065:2005

WEE/46

Countersinks for countersunk head screws with head configuration in accordance with ISO 7721

BS EN 13068:—

FME/9/3

Non-destructive testing. Radioscopic testing

BS EN 13068-1:2000

BS EN ISO 16047:2005

Quantitative measurement of imaging properties

Fasteners. Torque/clamp force testing FME/9/1

WEE/46

BS EN 13068-2:2000 Check of long term stability of imaging devices WEE/46

BS EN 13068-3:2001

Non-destructive testing. Standard test method for determining residual stresses by neutron diffraction WEE/46

A note of any objections to the proposals below should be sent to Debbie Stead, Head of Committee Service Centre – Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL or via email to [email protected] by 31 January, 2009.

BS 7083:1996 Guide to the accommodation and operating environment for information technology (IT) equipment ICT/-

BS EN ISO 21670:2003 Hexagon weld nuts with flange

BS EN 13925:—

Declaration of obsolescence indicates that the standard is not recommended for use in new equipment, but needs to be retained for the servicing of existing equipment that is expected to have a long working life.

DD CEN ISO/TS 21432:2005

General principles of radioscopic testing of metallic materials by X- and gamma rays WEE/46

BRITISH STANDARDS PROPOSED FOR DECLARATION OF OBSOLESCENCE

FME/9

This standard has been proposed for obsolescence as the document needs to be revised in light of progression in the area relating to the environments for information technology equipment

Non-destructive testing. X-ray diffraction from polycrystalline and amorphous materials

BS EN 25580:1992 BS EN 13925-1:2003 General principles WEE/46

Specification for minimum requirements for industrial radiographic illuminators for nondestructive testing WEE/46

BS EN 13925-2:2003 Procedures WEE/46

BS ISO 461:— Aircraft. Connectors for ground electrical supplies

BRITISH STANDARDS DECLARED OBSOLESCENT Declaration of obsolescence indicates that the standard is not recommended for use in new equipment but needs to be retained for the servicing of existing equipment that is expected to have a long working life.

BS EN 13927:2003 Non-destructive testing. Visual testing. Equipment WEE/46

BS 697:1986 BS ISO 461-1:2003 Design, performance and test requirements

PEL/78

ACE/6

This standard has been declared obsolescent as it is no longer relevant. It is superseded by BS EN 60903:1993

BS EN 14096:— Non-destructive testing. Qualification of radiographic film digitisation systems

BS EN 14096-1:2003 Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control

BS ISO 14595:2003 Microbeam analysis. Electron probe microanalysis. Guidelines for the specification of certified reference materials (CRMs)

Minimum requirements WEE/46

BS EN 14218:2003

BS ISO 17470:2004 Microbeam analysis. Electron probe microanalysis. Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry CII/9

Specification for the testing and inspection of electric and hydraulic lifts MHE/4

This standard has been declared obsolescent as it is superseded by BS 8486-1:2007 and BS 84862:2007, which has replaced BS 5655-10.1.1:1995 and BS 5655-10.2.1:1995

BS 6088:1981

FME/9

BS ISO 18114:2003 Hexagon bolts with flange with metric fine pitch thread. Small series

Surface chemical analysis. Secondary-ion mass spectrometry. Determination of relative sensitivity factors from ion-implanted reference materials

FME/9/3

CII/60


Lifts and service lifts

BS 5655-10:1986

Hexagon nuts with flange. Fine pitch thread

BS EN 14219:2003

BS 5655:—

CII/9

WEE/46

BS EN 14096-2:2003

Specification for rubber gloves for electrical purposes


Specification for solid glass beads for use with road marking compounds and for other industrial uses B/510

This standard has been re-declared as obsolescent for a further period as it is no longer relevant

17

British Standards Declared Obsolescent continued... BS 8110:— Structural use of concrete

BS 8110-1:1997 Code of practice for design and construction B/525/2

All relevant Eurocodes and their National Annexes for design of concrete buildings will be published in 2008. The NA to BS EN 1991-1-4 was published in September 2008. The relevant committee, B/525/2 consider that there is no need to continue to support BS 8110 now this is published as DCLG have indicated it is acceptable to use EC2 for design according to the Building Regulations and will be advising Local Authorities of this in the near future

BRITISH STANDARDS PROPOSED FOR WITHDRAWAL

BS 598-107:2004 Method of test for the determination of the composition of design surface course rolled asphalt B/510/1

A note of any objections to these withdrawals should be sent to Debbie Stead, Head of Committee Service Centre – Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL or via email to [email protected] by 31 January, 2009. Where any standard in this list has been amended since publication, a proposal to withdraw also includes all amendments published to date.

BS 8110-2:1985

This standard has been withdrawn as it is no longer used or required in the UK

BS 1583:1986 Specification for one-mark pipettes LBI/36

Superseded by BS EN ISO 648:2008

DD 213:1993 Method for determination of the indirect tensile stiffness modulus of bituminous mixtures B/510


Code of practice for special circumstances

BS EN ISO 8502:—

B/525/2

Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness

BS 6057:—

BS EN ISO 8502-10:2004

BS 6057-3.2:1997

Field method for the titrimetric determination of water-soluble chloride

Methods of test. Determination of total solids content of rubber latices

STI/21

PRI/50

This standard has been proposed for withdrawal as the corresponding CEN and ISO standards have been withdrawn

Superseded by BS ISO 124:2008


BS 8110-3:1985 Design charts for singly reinforced beams, doubly reinforced beams and rectangular columns

BRITISH STANDARDS WITHDRAWN

B/525/2

If any standard in this list has been amended since publication, all amendments published to date are also withdrawn


Rubber latices

BS 6282:— Devices with moving parts for the prevention of contamination of water by backflow

BS 6282-1:1982 Specification for check valves of nominal size up to and including DN 54 B/504

Superseded by BS EN 13959:2004

BS 6282-2:1982 BS 598:— Sampling and examination of bituminous mixtures for roads and other paved areas

Specification for terminal anti-vacuum valves of nominal size up to and including DN 54 B/504


BS 598-100:2004 BS EN 60601:— Medical electrical equipment

Methods for sampling for analysis B/510/1


BS EN 60601-1-3:1995 (BS 5724-1.3:1995) General requirements for safety. Collateral standard. General requirements for radiation protection in diagnostic X-ray equipment CH/62/2

This standard has been declared obsolescent as it is superseded by BS EN 60601-1-3:2008 and will be withdrawn on publication of the revised BS EN 60601-2 series

BS 6282-4:1982 Specification for combined check and antivacuum valves of nominal size up to and including DN 42 B/504

BS 598-101:2004 Methods for preparatory treatments of samples for analysis B/510/1



BS 6902:— Cardiac pacemakers

BS 6902-1:1990 BS 598-102:2003 Analytical test methods B/510/1

Specification for implantable cardiac pacemakers CH/150/6


Superseded by BS EN 45502-2-1:2003 and BS EN 45502-2-2:2008

BS 598-104:2005

BS 6902-1:Supplement No. 1:1996

Methods of test for the determination of density and compaction

Specification for implantable cardiac pacemakers. Electromagnetic compatibility

ACE/61/-/15

B/510/1

CH/150/6

This standard has been re-declared as obsolescent for a further period as it is no longer relevant


Superseded by BS EN 45502-2-1:2003 and BS EN 45502-2-2:2008

BS HC 404:1977 Specification for chromium-molybdenum alloy cast iron ring pots (suitable for centrifugally cast and sand cast sealing rings, piston rings and cylinder liners)

18



BS 6916:—

BS EN 61810-5:1999

BS 4361:—

Chain saws

Insulation coordination

Woodworking machines

EPL/94

BS 6916-5:1988

Superseded by BS EN 61810-1:2004

Methods of evaluating chain brake performance AGE/29

BS ISO 14520:—

Superseded by BS ISO 6535:2008

Gaseous fire-extinguishing systems. Physical properties and system design

BS 4361-0:1990 (ISO 7984:1988) Classification of woodworking machines and auxiliary machines used for woodworking MTE/23

BS 7412:2002 Plastics windows made from unplasticized polyvinyl chloride (PVC-U) extruded hollow profiles. Specification

BS ISO 14520-12:2005

B/538/1

FSH/18/6

Superseded by BS 7412:2007


IG-01 extinguishant

BS 4361-20:1990 (ISO 7983:1988) Specification for single blade circular sawing machines with travelling table MTE/23

BS EN 12475:— Classification of dense shaped refractory products

BS ISO 14520-13:2005 IG-100 extinguishant FSH/18/6

BS EN 12475-3:1998


RPI/1

BS ISO 14520-14:2005

Superseded by BS EN ISO 10081-3:2005

IG-55 extinguishant FSH/18/6

Non-active surgical implants. Joint replacement implants. Specific requirements for hip joint replacement implants CH/150/4

Superseded by BS EN ISO 21535:2007

BS EN 60491:1997



BS EN 60730:— Specification for automatic electrical controls for household and similar use

BS EN 60730-2:— Particular requirements

BS EN 60730-2-5:1995 Automatic electrical burner control systems CPL/72

Superseded by BS EN 60730-2-5:2002

BS EN 60730-2-8:1995 Electrically operated water valves, including mechanical requirements

Nomenclature for narrow belt sanding machines with sliding table or frame

BS ISO 14520-15:2005 IG-541 extinguishant FSH/18/6


BS 4361-24:1990 (ISO 9265:1988) Nomenclature for multi-spindle boring machines MTE/23

BRITISH STANDARDS UNDER REVIEW The following British Standards implement International and/or European Standards which are currently under review to see if they should be confirmed, revised or withdrawn. Comments are welcome and should be sent to Debbie Stead, Head of Committee Service Centre – Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL or via email to [email protected] by 31 January, 2009, in order to be considered by the relevant UK Committee.

CPL/72


BS 4361-23:1990 (ISO 9264:1988)

MTE/23

Safety requirements for electronic flash apparatus for photographic purposes EPL/108

Specification for double-end tenoning machines MTE/23

Basic products containing from 7% to 30% residual carbon

BS EN 12563:1999

BS 4361-22:1990 (ISO 7988:1988)

BS 3483:— Methods for testing pigments for paints

BS EN 60730-2-9:1995 Temperature sensing controls

BS 4361-25:1990 (ISO 9266:1988) Nomenclature for universal tool and cutter sharpeners MTE/23

BS 4361-26:1990 (ISO 9267:1988) Nomenclature for bandsaw blade sharpening machines MTE/23

BS 4540:— Sampling of spices and condiments

BS 4540-2:1982 (ISO 2825:1981) Method for preparation of a ground sample for analysis

BS 3483-A1:1983 (ISO 787-1:1982)

AW/7

Comparison of colour

BS 4585:—

STI/1

Methods of test for spices and condiments

BS 3483-C3:1982 (ISO 787-4:1981)

BS 4585-16:1990 (ISO 7541:1989)

EPL/94

Determination of acidity or alkalinity of the aqueous extract

Determination of total natural colouring matter content of ground (powdered) paprika


STI/1

AW/7

CPL/72


BS EN 61810:— Electromechanical non-specified time all-ornothing relays

BS EN 61810-1:1999 General requirements



19

British Standards Under Review continued... BS 5072:—

BS EN ISO 787-10:1995

BS EN ISO 3175-3:2003

Methods of test for sodium fluoride for industrial use

Determination of density. Pyknometer method

Procedure for testing performance when cleaning and finishing using hydrocarbon solvent

BS 5072-8:1980 (ISO 3566:1976)

BS EN ISO 787-11:1995

Determination of chlorides content CII/24

BS 6607:— Tool shanks with 7/24 taper for automatic tool changers

STI/1

Determination of tamped volume and apparent density after tamping

Specification for functional dimensions of front faces of spindle holders for machine centres MTE/5

BS 7020:— Analysis of iron ores

BS EN ISO 3175-4:2003 Procedure for testing performance when cleaning and finishing using simulated wetcleaning

STI/1

BS EN ISO 787-18:1995 Determination of residue on sieve. Mechanical flushing procedure STI/1

BS 6607-4:1994 (ISO 9524:1993)

TCI/82

TCI/82

BS EN ISO 3262:— Extenders for paints. Specifications and methods of test

BS EN ISO 787-19:1995 (BS 3483-C9:1995) Determination of water-soluble nitrates (Salicylic acid method)

BS EN ISO 3262-8:2000 Natural clay STI/1

STI/1

BS EN ISO 787-25:2006 (ISO 787-25:1993)

BS EN ISO 3953:1995 Metallic powders. Determination of tap density

Comparison of the colour, in full-shade systems, of white, black and coloured pigments. Colorimetric method

ISE/65

Methods for the determination of aluminium content. Titrimetric method

STI/1

Safety devices for protection against excessive pressure

ISE/58

BS EN 975:—

BS 7020-8.1:1988 (ISO 6830:1986)

BS 7745:—

Sawn timber. Appearance grading of hardwoods

BS EN ISO 4126-6:2003

BS EN 975-2:2004

PVE/12

End mills with brazed helical hardmetal tips

BS 7745-1:1994 (ISO 10145-1:1993)

Application, selection and installation of bursting disc safety devices

Poplars B/543

BS EN ISO 4618:2006

Dimensions of end mills with parallel shank MTE/18

BS EN ISO 4126:—

BS EN 1116:2004 Kitchen furniture. Co-ordinating sizes for kitchen furniture and kitchen appliances

Paints and varnishes. Terms and definitions STI/11

BS 7745-2:1994 (ISO 10145-2:1993)

FW/0

Dimensions of end mills with taper shank

BS EN ISO 1248:2008

MTE/18

Iron oxide pigments. Specifications and methods of test

TCI/69

BS EN ISO 105:—

STI/1

BS EN ISO 4934:2003

BS EN ISO 4684:2005

Textiles. Tests for colour fastness

BS EN 1957:2000

Leather. Chemical tests. Determination of volatile matter

Steel and iron. Determination of sulfur content. Gravimetric method ISE/18

Colour fastness to burnt-gas fumes

Domestic furniture. Beds and mattresses. Test methods for the determination of functional characteristics

TCI/81

FW/0/2

Classification of dense shaped refractory products

BS EN ISO 150:2007

BS EN ISO 2360:2003

BS EN ISO 10081-1:2005

BS EN ISO 105-G02:1997

Raw, refined and boiled linseed oil for paints and varnishes. Specifications and methods of test STI/3

Non-conductive coatings on non-magnetic electrically conductive basis materials. Measurement of coating thickness. Amplitudesensitive eddy current method

BS EN ISO 10081:—

Alumina-silica RPI/1

STI/33

BS EN ISO 10081-2:2005

General methods of test for pigments and extenders

BS EN ISO 3175:—

Basic products containing less than 7% residual carbon

Textiles. Dry cleaning and finishing

RPI/1

BS EN ISO 787-2:1995

BS EN ISO 3175-1:1998

BS EN ISO 10081-3:2005

Method for assessing the cleanability of textiles and garments

Basic products containing from 7% to 50% residual carbon

TCI/82

RPI/1

Determination of pH value of aqueous suspension

BS EN ISO 3175-2:1998

BS EN ISO 10806:2003

Procedures for tetrachloroethene

Pipework. Fittings for corrugated metal hoses

STI/1

TCI/82

PSE/12

BS EN ISO 787:—

Determination of matter volatile at 105°C STI/1

BS EN ISO 787-9:1995

20



BS EN ISO 10931:2005

BS EN ISO 15732:2005

BS EN ISO 18104:2003

Plastics piping systems for industrial applications. Poly(vinylidene fluoride) (PVDF). Specifications for components and the system

Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method

Health informatics. Integration of a reference terminology model for nursing

RPI/13

BS EN ISO 18756:2005

PRI/88/2

BS EN 13721:2004 Furniture. Assessment of the surface reflectance FW/0/1

BS EN ISO 15874:— Plastics piping systems for hot and cold water installations. Polypropylene (PP)

BS EN 13722:2004

IST/35

Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method RPI/13

Furniture. Assessment of the surface gloss

BS EN ISO 15874-1:2003

FW/0/1

General PRI/88/2

BS EN ISO 18757:2005

Railway applications. Suspension components. Hydraulic dampers

BS EN ISO 15874-2:2003 Pipes

Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of specific surface area of ceramic powders by gas adsorption using the BET method

RAE/3/-/4

PRI/88/2

RPI/13

BS EN 13990:2004

BS EN ISO 15874-5:2003

BS EN 13802:2004

Wood flooring. Solid softwood floor boards

Fitness for purpose of the system

B/543

PRI/88/2

BS EN 14073:—

BS EN ISO 15875:—

BS EN ISO 19112:2005 Geographic information. Spatial referencing by geographic identifiers IST/36

Office furniture. Storage furniture

BS EN 14073-2:2004 Safety requirements FW/0

Plastics piping systems for hot and cold water installations. Crosslinked polyethylene (PE-X)

BS EN ISO 15875-1:2003 General

BS EN ISO 19133:2007 Geographic information. Location based services. Tracking and navigation IST/36

PRI/88/2

BS EN ISO 19135:2007 BS EN 14073-3:2004 Test methods for the determination of stability and strength of the structure FW/0

BS EN 14074:2004 Office furniture. Tables and desks and storage furniture. Test methods for the determination of strength and durability of moving parts FW/0

BS EN 14076:2004 Timber stairs. Terminology B/543

BS EN ISO 15875-2:2003 Pipes PRI/88/2

BS EN ISO 19954:2003

Fittings

Footwear. Test methods for whole shoe. Washability in a domestic washing machine

PRI/88/2

TCI/69

BS EN ISO 15875-5:2003 Fitness for purpose of the system

BS EN ISO 20783:—

PRI/88/2

Petroleum and related products. Determination of emulsion stability of fire-resistant fluids

BS EN ISO 15876:— Plastics piping systems for hot and cold water installations. Polybutylene (PB)

BS EN ISO 20783-1:2003 Fluids in category HFAE MCE/18/-/16

Textiles. Oil repellency. Hydrocarbon resistance test

BS EN ISO 15876-1:2003

TCI/82

PRI/88/2

General

DD ENV 14464:2002

BS EN ISO 15876-2:2003

Sawn timber. Method for assessment of casehardening

Pipes PRI/88/2

B/543

BS EN ISO 15876-3:2003 BS EN ISO 14935:1999

Fittings

Petroleum and related products. Determination of wick flame persistence of fire-resistant fluids

PRI/88/2

MCE/18/-/16

BS EN ISO 15876-5:2003

Steel cord conveyor belts

IST/36

BS EN ISO 15875-3:2003

BS EN ISO 14419:1999

BS EN ISO 15236:—

Geographic information. Procedures for item registration

BS EN ISO 20783-2:2003 Fluids in category HFB MCE/18/-/16

BS EN ISO 21178:2006 Light conveyor belts. Determination of electrical resistances PRI/67

BS EN ISO 21179:2006 Fitness for purpose of the system PRI/88/2

Light conveyor belts. Determination of the electrostatic field generated by a running light conveyor belt PRI/67

BS EN ISO 17834:2003 BS EN ISO 15236-1:2005

Thermal spraying. Coatings for protection against corrosion and oxidation at elevated temperatures

BS EN ISO 21180:2006

Design, dimensions and mechanical requirements for conveyor belts for general use PRI/67

STI/40

PRI/67



Light conveyor belts. Determination of the maximum tensile strength

21

British Standards Under Review continued... BS EN ISO 21181:2006

BS ISO 763:2003

BS ISO 4010:1998

Light conveyor belts. Determination of the relaxed elastic modulus

Fruit and vegetable products. Determination of ash insoluble in hydrochloric acid

Diesel engines. Calibrating nozzle, delay pintle type

PRI/67

AW/100

MCE/22

BS EN ISO 21182:2006

BS ISO 855:2003

BS ISO 5389:2005

Light conveyor belts. Determination of the coefficient of friction

Oil of lemon [Citrus limon (L.) Burm. f.], obtained by expression

Turbocompressors. Performance test code

PRI/67

AW/54

BS EN ISO 21183:— Light conveyor belts

BS EN ISO 21183-1:2006 Principal characteristics and applications PRI/67

BS ISO 1122:— Vocabulary of gear terms

BS ISO 1122-1:1998 Definitions related to geometry MCE/5

BS EN ISO 21183-2:2006 List of equivalent terms PRI/67

BS EN ISO 23953:—

BS ISO 1505:1993 Textile machinery. Widths relating to dyeing and finishing machines. Definitions and range of nominal widths

BS ISO 1919:1998 Vocabulary RHE/19

BS ISO 5391:2003 Pneumatic tools and machines. Vocabulary MCE/8

BS ISO 6264:1998 Hydraulic fluid power. Pressure-relief valves. Mounting surfaces MCE/18

BS ISO 6621:— Internal combustion engines. Piston rings

TCI/33

Refrigerated display cabinets

BS EN ISO 23953-1:2005

MCE/8

Road vehicles. M14 x 1,25 spark plugs with flat seating and their cylinder head housings

BS ISO 6621-2:2003 Inspection measuring principles MCE/14/-/10

MCE/9

BS ISO 6621-4:2003 BS ISO 2173:2003

General specifications MCE/14/-/10

Classification, requirements and test conditions

Fruit and vegetable products. Determination of soluble solids. Refractometric method

RHE/19

AW/100

BS EN ISO 23953-2:2005

BS ISO 6621-5:2005 Quality requirements

BS ISO 5:—

BS ISO 2240:2003

Photography. Density measurements

Photography. Colour reversal camera films. Determination of ISO speed

MCE/14/-/10

CPW/42

BS ISO 6622:—

BS ISO 5-4:1995

Internal combustion engines. Piston rings

Geometric conditions for reflection density CPW/42

BS ISO 2344:1998 Road vehicles. M14 x 1,25 spark plugs with conical seating and their cylinder head housings

BS ISO 76:2006 Rolling bearings. Static load ratings MCE/7

BS ISO 113:1999 Rolling bearings. Plummer block housings. Boundary dimensions

MCE/9

BS ISO 2385:1993 Corkwood in planks, virgin cork, cleanings, cork pieces, corkwood refuse and corkwaste. Sampling to determine moisture content

Road vehicles. Engine test code. Gross power

Belt drives. Pulleys. Limiting values for adjustment of centres

MCE/22

MCE/10

BS ISO 2704:1998

Rolling bearings. Thrust bearings. Tolerances

Rectangular rings made of steel MCE/14/-/10

BS ISO 6624:— Internal combustion engines. Piston rings

BS ISO 6624-2:2003 Half keystone rings made of cast iron MCE/14/-/10

Road vehicles. M10 x 1 spark plugs with flat seating and their cylinder head housings

BS ISO 6624-4:2003

MCE/9

Half keystone rings made of steel

MCE/7

BS ISO 3519:2005 BS ISO 254:1998

Oil of lime distilled, Mexican type [Citrus aurantifolia (Christm.) Swingle]

Belt drives. Pulleys. Quality, finish and balance

AW/54

MCE/14/-/10

BS ISO 6743:— Lubricants, industrial oils and related products (class L). Classification

MCE/10

BS ISO 762:2003

BS ISO 6622-2:2003

PRI/81

BS ISO 2534:1998

BS ISO 199:2005

Rectangular rings made of cast iron MCE/14/-/10

MCE/7

BS ISO 155:1998

BS ISO 6622-1:2003

BS ISO 3761:2005

Fruit and vegetable products. Determination of mineral impurities content

Oil of rosewood, Brazilian type [Aniba rosaeodora Ducke var. amazonica Ducke or Aniba parviflora (Meissner) Mez]

BS ISO 6743-3:2003

AW/100

AW/54

PTI/7

22


Family D (Compressors)


BS ISO 6966:—

BS ISO 9848:2003

BS ISO 13357:—

Aircraft ground equipment. Basic requirements

Photography. Source document microfilms. Determination of ISO speed and ISO average gradient

Petroleum products. Determination of the filterability of lubricating oils

CPW/42

BS ISO 13357-2:2005

BS ISO 6966-1:2005 General design requirements ACE/57

BS ISO 6966-2:2005 Safety requirements

Procedure for dry oils

BS ISO 9947:2005

BS ISO 13556:1998

TCI/33

ACE/57

BS ISO 9981:1998 BS ISO 6968:2005 Aircraft ground equipment. Lower deck loader. Functional requirements

Belt drives. Pulleys and V-ribbed belts for the automotive industry. PK profile: Dimensions MCE/10

ACE/57

BS ISO 9982:1998 BS ISO 7063:2003 Rolling bearings. Needle roller bearing track rollers. Boundary dimensions and tolerances

MCE/18/-/16

Textile machinery and accessories. Two-for-one twisters. Vocabulary

Belt drives. Pulleys and V-ribbed belts for industrial applications. PH, PJ, PK, PL and PM profiles. Dimensions

Road vehicles. Localization of exhaust system leaks and equipment specifications MCE/22

BS ISO 14469:— Road vehicles. Compressed natural gas (CNG) refuelling connector

BS ISO 14469-3:2006 25 MPa (250 bar) connector

MCE/10

GSE/40

BS ISO 10054:1998

BS ISO 14681:1998

Internal combustion compression-ignition engines. Measurement apparatus for smoke from engines operating under steady-state conditions. Filter type smokemeter

Diesel engines. Fuel injection pump testing. Calibrating fuel injectors

MCE/22

BS ISO 14794:2003

MCE/7

BS ISO 7654:1998 Road vehicles. Spin-on fuel filters for diesel engines. Mounting and connecting dimensions MCE/21

BS ISO/IEC 7816:— Identification cards. Integrated circuit(s) cards with contacts

BS ISO/IEC 7816-1:1998+A1:2003

BS ISO 10059:— Dense shaped refractory materials. Determination of cold compressive strength

BS ISO 10059-2:2003

MCE/22

Heavy commercial vehicles and buses. Braking in a turn. Open-loop test methods AUE/15

BS ISO 15237:2003

Test with packing

Solid mineral fuels. Determination of total mercury content of coal

IST/17

RPI/1

PTI/16

BS ISO 8007:—

BS ISO 10458:1993

Carbonaceous materials used in the production of aluminium. Sampling plans and sampling from individual units

Textile machinery. Square bars for winding devices relating to dyeing and finishing machines. Dimensions

Physical characteristics

Sidewall blocks CII/24

BS ISO 8008:2005 Aluminium oxide primarily used for the production of aluminium. Determination of specific surface area by nitrogen adsorption CII/24

BS ISO 8404:2003 Tools for moulding. Angle pins MTE/12

BS ISO 8443:1999

Solid mineral fuels. Determination of total cadmium content of coal PTI/16

TCI/33

BS ISO 8007-3:2004

BS ISO 15238:2003

BS ISO 11901:— Tools for pressing. Gas springs

BS ISO 11901-1:2003 General specifications MTE/12

BS ISO 15312:2003 Rolling bearings. Thermal speed rating. Calculation and coefficients MCE/7

BS ISO 16067:— Photography. Spatial resolution measurements for electronic scanners for photographic images

BS ISO 12140:1998 Agricultural machinery. Agricultural trailers and trailed equipment. Drawbar jacks

BS ISO 16067-1:2003 Scanners for reflective media

AGE/6

CPW/42

BS ISO 13203:2006 Chains, sprockets and accessories. List of equivalent terms

Rolling bearings. Radial ball bearings with flanged outer ring. Flange dimensions

MCE/1

MCE/7

BS ISO/IEC 13249:—

BS ISO 8899:2003

Information technology. Database languages. SQL multimedia and application packages

Oil of lemon petitgrain [Citrus limon (L.) Burm.f.]

BS ISO/IEC 13249-2:2003

AW/54

Full-text

BS ISO 16860:2005 Hydraulic fluid power. Filters. Test method for differential pressure devices MCE/18/-/6

IST/40

BS ISO 16915:2003 Tools for moulding. Sprue pullers MTE/12

BS ISO 17080:2005

Oil of bergamot petitgrain [Citrus bergamia (Risso et Poit.)]

BS ISO/IEC 13249-5:2003 Still image

Manually portable agricultural and forestry machines and powered lawn and garden equipment. Design principles for single-panel product safety labels

AW/54

IST/40

AGE/6

BS ISO 8900:2005



23

British Standards Under Review continued... BS ISO 17455:2005

BS ISO 20462-3:2005

Plastics piping systems. Multilayer pipes. Determination of the oxygen permeability of the barrier pipe

Quality ruler method CPW/42

Method for impulse testing of hydraulic hose, tubing and fitting assemblies for aerospace fluid systems

BS ISO 20508:2003

ACE/69

PRI/88/4

Hydraulic fluid power. Electrically controlled hydraulic pumps. Test methods to determine performance characteristics

Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of light transmittance of ceramic films with transparent substrate

MCE/18

RPI/13

BS ISO 17559:2003

BS ISO 17584:2005 Refrigerant properties RHE/18

BS ISO 18084:2005 Press tools for tablets. Punches and dies MTE/12

BS ISO 18573:2003 Conveyor belts. Test atmospheres and conditioning periods PRI/67

BS ISO 21093:2003

BS ISO 18929:2003 Imaging materials. Wet-processed silver-gelatin type black-and-white photographic reflection prints. Specifications for dark storage

AW/54

BS M 57:1985 (ISO 7313:1984)

BS ISO 21390:2005 Oil of wintergreen, China [Gaultheria yunnanensis (Franch.) Rehd.], redistilled

Specification for high temperature convoluted hose assemblies in polytetrafluoroethylene (PTFE) for aerospace applications

AW/54

ACE/69

BS ISO 22029:2003

BS M 61:1989 (ISO 7315:1988)

Standard file format for spectral data exchange

Specification for envelope dimensions of “P” clamps (loop clamps) for fluid systems ACE/69

BS ISO 22234:2005 Cinematography. Relative and absolute sound pressure levels for motion-picture multi-channel sound systems. Measurement methods and levels applicable to analog photographic film audio, digital photographic film audio and D-cinema audio

BS ISO 19128:2005

BS ISO 24347:2005

Geographic information. Web map server interface

Agricultural vehicles. Mechanical connections between towed and towing vehicles. Dimensions of ball-type coupling device (80 mm)

BS ISO 19334:2006 Binders for paints and varnishes. Gum rosin. Gas-chromatographic analysis STI/3

BS ISO 19438:2003 Diesel fuel and petrol filters for internal combustion engines. Filtration efficiency using particle counting and contaminant retention capacity MCE/21/6

BS 2A 296:1995 (ISO 7913:1994)

Specification for characteristics, boundary dimensions, tolerances and static load ratings of airframe bearings MCE/7

BS AU 259:1995 (ISO 12667:1993)

ACE/12

AUE/13

BS A 305:1994 (ISO 7961:1994) ACE/12

BS 4G 173:— Specification for dimensions

CII/24

BS 4G 173-2:1985 (ISO 461-2:1985)

NEW WORK STARTED The reference number of the committee responsible for each item of new work started is given after each entry. Where a work item has the temporary designation “BS EN XXXX”, it has not yet been allocated a standard number by the European standards body.

Connectors for ground electrical supplies for aircraft ACE/6

BS 476:— Fire tests on building materials and structures

Overview of psychophysical elements CPW/42

BS 3SP 89:1983 (ISO 1002:1983)

Specification for components for commercial vehicles and buses. Cross-tooth propeller shaft flanges, type T

Carbonaceous materials used in the production of aluminium. Calcined coke. Determination of crystallite size of calcined petroleum coke by X-ray diffraction

BS ISO 20462-1:2005

ACE/69

Bolts and screws, metric. Tolerances of form and position

BS ISO 20203:2005

Photography. Psychophysical experimental methods for estimating image quality

Specification for dimensions of ’Q’ clamps (centre-mounted clamps) for fluid systems

AGE/6

Bolts. Test methods

BS ISO 20462:—

BS M 66:1987

CPW/36

CPW/42

IST/36

ACE/69

Oil of dwarf pine (Pinus mugo Turra)

CII/9

MCE/5/-/2

BS M 55:1984 (ISO 7257:1983) Method for rotary flexure testing of hydraulic tubing joints and fittings for aerospace use

BS ISO 18653:2003 Gears. Evaluation of instruments for the measurement of individual gears

BS 2M 52:1989 (ISO 6772:1988)

BS 2G 219:1983 (ISO 6858:1982)

BS 476-6:1989/Amendment 1

Triplet comparison method

Specification for general requirements for ground support electrical supplies for aircraft

Method of test for fire propagation for products

CPW/42

ACE/6

FSH/21/1

BS ISO 20462-2:2005

24



BS 1916:—

BS 8527

BS EN 299 (Revision)

Limits and fits for engineering

Aggregates. Aggregates for unbound and hydraulically bound materials for use in civil engineering works and road construction. Guidance on the use of BS EN 13242

Oil pressure atomizing nozzles. Determination of the angle and spray characteristics

BS 1916-1 (Revision) Limits and tolerances will supersede BS 1916-1:1953 TDW/4

BS 1916-2 (Revision) Guide to the selection of fits in BS 1916-1

B/502

BS 8528 Aggregates. Armourstone. Guidance on the use of BS EN 13383-1

BS 1916-3 (Revision) Recommendations for tolerances, limits and fits for large diameters

BS EN 527:— Office furniture. Work tables and desks

Dimensions

BS 8551

will supersede BS EN 527-1:2000

Water quality. Guide to assuring potable water quality in temporary supply situations

FW/0/3

EH/3

BS EN 794:— Lung ventilators

will supersede BS 1916-3:1963 TDW/4

GSE/27

BS EN 527-1 (Revision)

B/502

will supersede BS 1916-2:1953 TDW/4

will supersede BS EN 299:1999

BS EN 31 (Revision) Pedestal wash basins. Connecting dimensions

BS 3655:1981/Amendment 1


Recommendations for informative labelling of textile floor coverings

B/503

PRI/3

BS EN 33 (Revision)

BS EN 794-3:1999/Amendment 2 Particular requirements for emergency and transport ventilators CH/121/5

BS 4311:—

Pedestal W.C. pans with close-coupled flushing cistern. Connecting dimensions

Specification for gauge blocks and accessories


Protection against falls from a height. Anchor devices. Requirements and testing

B/503


BS 4311-2 (Revision) Accessories will supersede BS 4311-2:1994

PH/5

BS EN 71:— Safety of toys

TDW/4

BS 4500 (Revision) ISO limits and fits. Guidance will supersede BS 4500-4:1985 and BS 4500-5:1988 TDW/4

BS 6915:2001/Amendment 1 Design and construction of fully supported lead sheet roof and wall coverings. Code of practice B/542/11

BS 8204:— Screeds, bases and in situ floorings



BS EN 71-4 (Revision) Experimental sets for chemistry and related activities will supersede BS EN 71-4:1998+A3:2007 CW/15

DD CEN/TS 81:— Safety rules for the construction and installation of lifts. Basics and interpretations

DD CEN/TS 81-11 Interpretations related to EN 81 family of standards MHE/4

BS EN WI 00216061 Chemical disinfectants and antiseptics. Chemical-thermal linen disinfection. Test method and requirements (phase 2, step 2) CH/216

BS EN 973 (Revision) Chemicals used for treatment of water intended for human consumption. Sodium chloride for regeneration of ion exchangers will supersede BS EN 973:2002

BS EN WI CSF05025

CII/59

Weigh-in-motion of road vehicles

PD CEN/TR XXXX

Concrete bases and cement sand levelling screeds to receive floorings. Code of practice

PRI/69

B/507/6

BS EN 115:—

Textiles. Cosmetotextiles TCI/80

Safety of escalators and moving walks

BS 8204-2:2003/Amendment 1 Concrete wearing surfaces. Code of practice B/507/6


BS EN 1060:— BS EN 115-2 Rules for the improvement of safety of existing escalators and moving walks MHE/4

BS EN 1060-1:1996/Amendment 2

Polymer modified cementitious levelling screeds and wearing screeds. Code of practice B/507/6

Specification for non-invasive sphygmomanometers

General requirements

BS EN 131:—

CH/205/10

Ladders

BS 8409 (Revision)


Soft indoor play areas. Code of practice


will supersede BS 8409:2002

User instructions

Supplementary requirements for mechanical sphygmomanometers

SW/65/5


CH/205/10

B/512

BS 8526


Aggregates. Aggregates for concrete. Guidance on the use of BS EN 12620

BS EN 285:2006+A1:2008/Amendment 2 Sterilization. Steam sterilizers. Large sterilizers

Supplementary requirements for electromechanical blood pressure measuring systems

B/502

LBI/35

CH/205/10



25

New Work Started continued... BS EN 1276 (Revision)

BS EN 3155-075

BS EN 12006:—

Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic, and institutional areas. Test method and requirements (phase 2, step 1)

Contacts, electrical, quadrax, size 8, female, type E, crimp, class R. Product standard

Non-active surgical implants. Particular requirements for cardiac and vascular implants


Aerospace series. Cables, electrical, aircraft use. Test methods

CH/216

BS EN 1282:— Tracheostomy tubes

BS EN 1282-2:1997/Amendment 1 Paediatric tubes CH/121/5

ACE/6

BS EN 12006-2:1998/Amendment 1 BS EN 3475:—

BS EN 3475-100 (Revision) General will supersede BS EN 3475-100:2002

Vascular prostheses including cardiac valve conduits CH/150/2

BS EN 12006-3:1999/Amendment 1 Endovascular devices CH/150/2

ACE/6

BS EN 12342:1998/Amendment 1 BS EN 4652:— Aerospace series. Connectors, coaxial, radiofrequency

Breathing tubes intended for use with anaesthetic apparatus and ventilators CH/121/5

BS EN 1536 (Revision) Execution of special geotechnical work. Bored piles

BS EN 4652-001


ACE/6

Technical specification

BS EN 12470:— Clinical thermometers


B/526

BS EN 4652-002 Specification of performances

Metallic liquid-in-glass thermometers with maximum device

Execution of special geotechnical works. Diaphragm walls

ACE/6

LBI/36/3


PD CEN/TR 4653



B/526

BS EN 1656 (Revision) Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants used in veterinary field. Test method and requirements (phase 2/step 1) will supersede BS EN 1656:2000 CH/216

Aerospace series. Technical specification of plating of connectors cadmium and hexavalent chromium replacement ACE/6

BS EN 4673:— Aerospace series. Inserts, UNJ threads, selflocking, self-broaching keys

BS EN 4673-003 Technical specification

BS EN 1782:1998/Amendment 1 CH/121/5

BS EN 1820:2005/Amendment 1

Performance of compact electrical thermometers (non-predictive and predictive) with maximum device LBI/36/3

BS EN 12470-4:2001/Amendment 1 Performance of electrical thermometers for continuous measurement LBI/36/3

PD CEN/TR 4676 Aerospace series. Aluminium pigmented coatings. List of commercial products


ACE/12

Performance of infra-red ear thermometers (with maximum device)

Anaesthetic reservoir bags CH/121/5

BS EN ISO 8359 (Revision)

BS EN 3155:—

Medical electrical equipment. Oxygen concentrators for medical use. Safety requirements

Aerospace series. Electrical contacts used in elements of connection

LBI/36/3


ACE/12

Tracheal tubes and connectors

Phase change type (dot matrix) thermometers

will supersede BS EN ISO 8359:1997

LBI/36/3

BS EN 12735:— Copper and copper alloys. Seamless, round copper tubes for air conditioning and refrigeration

CH/121/5

BS EN 3155-032 Contacts, electrical, coaxial, 50 ohms, size 5, male, type D, crimp, class R. Product standard

BS EN ISO 8835:— Inhalational anaesthesia systems

ACE/6

BS EN ISO 8835-2 (Revision) BS EN 3155-033

Anaesthetic breathing systems

Contacts, electrical, coaxial, 50 ohms, size 5, female, type D, crimp, class R. Product standard

will supersede BS EN ISO 8835-2:2007 CH/121

BS EN ISO 9360:— Contacts, electrical, coaxial, 50 ohms, size 1, male, type D, solder, class R. Product standard

Anaesthetic and respiratory equipment. Heat and moisture exchangers (HMEs) for humidifying respired gases in humans

ACE/6

BS EN ISO 9360-2 (Revision) BS EN 3155-064 Contacts, electrical, coaxial, 50 ohms, size 1, female, type D, solder, class R. Product standard ACE/6

26

Tubes for piping systems will supersede BS EN 12735-1:2001 NFE/34/1

BS EN 12735-2 (Revision) Tubes for equipment will supersede BS EN 12735-2:2001

ACE/6

BS EN 3155-063


NFE/34/1

BS EN 13060:2004/Amendment 1 Small steam sterilizers LBI/35

HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml

BS EN 13060:2004/Amendment 2

will supersede BS EN ISO 9360-2:2002

Small steam sterilizers

CH/121

LBI/35



BS EN 13241:—

BS EN 15643:—

BS EN 60601:—

Industrial, commercial and garage doors and gates. Product standard

Sustainability of construction works. Sustainability assessment of buildings

Medical electrical equipment

BS EN 60601-1:2006/Amendment 1 BS EN 13241-1:2003/Amendment 1 Products without fire resistance or smoke control characteristics B/538

BS EN 15643-1 General framework B/558

General requirements for basic safety and essential performance CH/62/1

BS EN 60601-1-6 (Revision) BS EN 13544:— Respiratory therapy equipment

BS EN 15643-2 Framework for the assessment of environmental performance

General requirements for basic safety and essential performance. Collateral standard. Usability will supersede BS EN 60601-1-6:2007

B/558

CH/62/1

BS EN 13544-2:2002/Amendment 1 Tubing and connectors CH/121/5

BS EN 15890


Fixed vertical road traffic signs. Visual performance of retroreflective sheeting materials

Air entrainment devices

B/509/3

BS EN 60601-2-62 Particular requirements for basic safety and essential performance of high intensity therapeutic ultrasound (HITU) system CH/62/4

CH/121/5

BS EN 15892 BS EN 13633 Building hardware. Electrically controlled panic exit systems for use on escape routes. Requirements and test methods

Railway applications. Noise emission. Measurement of noise inside driver’s cabs

Building hardware. Electrically controlled emergency exit systems for use on escape routes. Requirements and test methods B/538

Cable networks for television signals, sound signals and interactive services

RAE/1


B/538

BS EN 13637

BS EN 60728:—

DD CEN ISO/TS 17575:—

Safety

Electronic fee collection. Application interface definition for autonomous systems


DD CEN ISO/TS 17575-1

BS EN 60811:—

Charging

Insulating and sheathing materials of electric cables. Common test methods

EPL/278

EPL/100

BS EN 13724 (Revision) Postal services. Apertures of private letter boxes and letter plates. Requirements and test methods

DD CEN ISO/TS 17575-2


Communication and connection to the lower layers

SVS/4

EPL/278

BS EN 60811-100 General GEL/20/17

BS EN 60811-201 BS EN 13751 (Revision) Foodstuffs. Detection of irradiated food using photostimulated luminescence

BS EN ISO 21427:— Water quality. Evaluation of genotoxicity by measurement of the induction of micronuclei

Measurement of insulation thickness will partially supersede BS EN 60811-1.1:1995 GEL/20/17

will supersede BS EN 13751:2002 AW/-/3

BS EN ISO 21427-2 BS EN 13798 (Revision)

Mixed population method using the cell line V79

Hydrometry. Specification for a reference raingauge pit

will supersede BS ISO 21427-2:2006


Measurement of thickness and overall dimensions will partially supersede BS EN 60811-1.1:1995 GEL/20/17

EH/3/5

BS EN 60811-203

CPI/113/5

BS EN 60086:— BS EN 13867:2002/Amendment 1

BS EN 60811-202

Primary batteries

Measurement of overall dimensions will partially supersede BS EN 60811-1.1:1995 GEL/20/17

Concentrates for haemodialysis and related therapies


CH/105/2

Safety of batteries with aqueous electrolyte

BS EN 60811-301

CPL/35

Measurement of the permittivity at 23°C of filling compounds

BS EN 14081:— Timber structures. Strength graded structural timber with rectangular cross section

BS EN 60268:— Sound system equipment


will partially supersede BS EN 60811-5.1:2000 GEL/20/17

BS EN 60811-302

Machine grading. Additional requirements for initial type testing

BS EN 60268-4 (Revision) Microphones

Measurement of the D.C. resistivity at 23°C and 100°C of filling



will partially supersede BS EN 60811-5.1:2000

B/518

EPL/100

GEL/20/17



27

New Work Started continued... BS EN 60811-401

BS EN 60811-501

BS EN 60811-512

Thermal ageing methods. Ageing in an air oven

Tests for determining the mechanical properties insulating and sheathing compounds

Tensile strength and elongation at break after conditioning at elevated temperature; methods specific to polyethylene and polypropylene compounds



will partially supersede BS EN 60811-4-2:2004

BS EN 60811-402 Water absorption tests will partially supersede BS EN 60811-1.3:1995 GEL/20/17

BS EN 60811-403

BS EN 60811-502

GEL/20/17

Shrinkage test for insulations will partially supersede BS EN 60811-1.3:1995

BS EN 60811-513

GEL/20/17

Methods specific to polyethylene and polypropylene compounds. Wrapping test after conditioning

Ozone resistance test on elastomeric compounds

BS EN 60811-503


Shrinkage test for sheaths

GEL/20/17


will partially supersede BS EN 60811-4-2:2004 GEL/20/17

GEL/20/17

BS EN 60811-601

BS EN 60811-404 Mineral oil immersion test for sheaths made with elastomeric compounds will partially supersede BS EN 60811-2-1:1998 GEL/20/17

BS EN 60811-504 Bending tests at low temperature for insulation and sheaths will partially supersede BS EN 60811-1-4:1995

BS EN 60811-405 Thermal stability test for PVC insulations and PVC sheaths will partially supersede BS EN 60811-3.2:1995 GEL/20/17

BS EN 60811-406 Resistance to environmental stress cracking of polyethylene and polypropylene compounds

BS EN 60811-505 Elongation at low temperature for insulations and sheaths GEL/20/17

Impact test at low temperature for insulations and sheaths

BS EN 60811-407


Measurement of mass increase of polyethylene and polypropylene compounds

GEL/20/17

Long-term stability test of polyethylene and polypropylene compounds will partially supersede BS EN 60811-4-2:2004 GEL/20/17

BS EN 60811-409 Loss of mass test for thermoplastic insulations and sheaths

BS EN 60811-410 Test method for copper-catalysed oxidative degradation of polyolefin insulated conductors

BS EN 60811-507 Hot set test for cross-linked materials will partially supersede BS EN 60811-2-1:1998 GEL/20/17

BS EN 60811-508 Pressure test at high temperature for insulation and sheaths will partially supersede BS EN 60811-3.1:1995

BS EN 60811-411 Lower temperature brittleness of filling compounds will partially supersede BS EN 60811-5.1:2000 GEL/20/17

GEL/20/17

BS EN 60811-603 Measurement of total acid number of filling compounds will partially supersede BS EN 60811-5.1:2000 GEL/20/17

Measurement of absence of corrosive gasses components in filling compounds will partially supersede BS EN 60811-5.1:2000 GEL/20/17

BS EN 60811-605 Measurement of carbon black will partially supersede BS EN 60811-4-1:2004 GEL/20/17

GEL/20/17

BS EN 60811-606 BS EN 60811-509 Tests for resistance of insulations and sheaths to cracking

Methods for determining the density will partially supersede BS EN 60811-1.3:1995 GEL/20/17




BS EN 60811-604


Separation of oil in filling compounds


BS EN 60811-506

BS EN 60811-408

GEL/20/17

BS EN 60811-602

GEL/20/17

GEL/20/17


GEL/20/17



Methods specific of the drop-point to filling compounds

BS EN 60811-510 Methods specific to polyethylene and polypropylene compounds. Wrapping test after thermal ageing in air

BS EN 60811-607 Test for the assessment of carbon black dispersion in polyethylene and polypropylene will partially supersede BS EN 60811-4-1:2004 GEL/20/17


BS EN 61169:— Radio-frequency connectors

BS EN 60811-412

BS EN 60811-511

Thermal ageing methods. Ageing in an air bomb

Measurement of the melt flow index of polyethylene and polypropylene compounds



Sectional specification. Radio frequency coaxial connectors of type SSMA

GEL/20/17

GEL/20/17

EPL/46/2

28


BS EN 61169-18


BS EN 61169-19

BS ISO 1043:—

BS ISO 4602 (Revision)

Sectional specification. Radio frequency coaxial connectors of type SSMB

Plastics. Symbols and abbreviated terms

Reinforcements. Woven fabrics. Determination of number of yarns per unit length of warp and weft

EPL/46/2

BS ISO 1043-1 Basic polymers and their special characteristics

BS EN 61169-35


Sectional specification. Radio frequency coaxial connectors of type 2, 92

PRI/10

BS ISO 1060:— Plastics. Homopolymer and copolymer resins of vinyl chloride

Sectional specification. Radio frequency coaxial connectors of type CQA EPL/46/2

BS EN 61169-42 Sectional specification. Radio frequency coaxial connectors of type CQN

PRI/42

BS ISO 4901

EPL/46/2

BS EN 61169-41

will supersede BS ISO 4602:1997

Reinforced plastics based on unsaturated polyester resins. Determination of residual styrene monomer content will supersede BS 2782-4:Method 432A:1991 PRI/42

BS ISO 1060-2 Preparation of test samples and determination of properties

BS ISO 6356 (Revision) Textile floor coverings. Assessment of static electrical propensity. Walking test



PRI/82

PRI/3

BS ISO 1658:—

BS ISO 6498:—

Natural rubber (NR)

Animal feeding stuffs. Preparation of test samples

EPL/46/2

BS EN 62595 Measurement methods of LED backlight unit for liquid crystal displays EPL/47

BS ISO 1658-2 Evaluation procedure will supersede BS 5738:1980

BS EN 62604:— Surface Acoustic Wave (SAW) and Bulk Acoustic Wave (BAW) dupliexers

BS EN 62604-2

PRI/50/-/1

BS ISO 5:— Photography and graphic technology. Density measurements

Terms and definitions will partially supersede BS 5766-10:1999 AW/10

BS ISO 1872:—

BS ISO 6498-2

Plastics. Polyethylene (PE) moulding and extrusion materials

Guidelines

Guide to the use EPL/49

BS ISO 6498-1

will partially supersede BS 5766-10:1999 AW/10

BS ISO 1872-2 Preparation of test specimens and determination of properties will supersede BS EN ISO 1872-2:2007

BS ISO 6721:— Plastics. Determination of dynamic mechanical properties

PRI/82

BS ISO 6721-11 BS ISO 5-1 Terms, symbols and notations


will supersede BS 1384-1:1985

Rigid cellular plastics. Determination of tensile properties

CPW/42

will supersede BS ISO 1926:2005 PRI/24

BS ISO 5-2 Geometric conditions for transmission density will supersede BS 1384-2:2001 CPW/42

BS ISO 2076 (Revision) Textiles. Man-made fibres. Generic names will supersede BS ISO 2076:1999

Glass transition temperature PRI/21

BS ISO 7010:2003/Amendment 61 Graphical symbols. Safety colours and safety signs. Safety signs used in workplaces and public areas PH/8/1

BS ISO 7718:—

TCI/24

Aircraft. Passenger doors interface requirements for connection of passenger boarding bridge

BS ISO 3767:—

BS ISO 7718-1

Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Symbols for operator controls and other displays

Main deck doors

BS ISO 5-3 (Revision) Spectral conditions will supersede BS ISO 5-3:1995 CPW/42

BS ISO 5-4 (Revision)

BS ISO 7792:—

Geometric conditions for reflection density



Symbols for agricultural tractors and machinery

CPW/42

will supersede BS ISO 3767-2:1991 AGE/6

BS ISO 294:—

ACE/57

Plastics. Thermoplastic polyester (TP) moulding and extrusion materials

BS ISO 7792-1 Designation system and basis for specifications will supersede BS EN ISO 7792-1:2004

Plastics. Injection moulding of test specimens of thermoplastic materials

BS ISO 4000:—

BS ISO 294-2


Small tensile bars

Tyres (metric series)

Preparation of test specimens and determination of properties




PRI/21

AUE/4

PRI/82

Passenger car tyres and rims

PRI/82

BS ISO 7792-2



29

New Work Started continued... DD ISO/TS 7849:—

BS ISO 9241-420

DD ISO/TS 10303-1003

Acoustics. Determination of airborne sound power levels emitted by machinery using vibration measurement

Selection procedures for physical input devices

Application module. Curve appearance

PH/9

AMT/4

BS ISO 9801

DD ISO/TS 10303-1004

DD ISO/TS 7849-1 Survey method estimating an upper limit of the A-weighted sound power level

Ophthalmic instruments. Trial case lenses

Application module. Elemental geometric shape


AMT/4

EH/1

CH/172/6

BS ISO 7919:—


Mechanical vibration. Evaluation of machine vibration by measurements on rotating shafts

Application module. General surface appearance

Iron ores. Determination of calcium content. Flame atomic absorption spectrometric method

AMT/4



ISE/58

Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min


will supersede BS ISO 7919-2:2001 GME/21/5

BS ISO 8566:— Cranes. Cabins

BS ISO 8566-1 General MHE/3/5

BS ISO 8566-3 Tower cranes

Ophthalmic optics. Visual acuity testing. Standard optotype and its presentation

AMT/4

Iron ores. Determination of magnesium content. Flame atomic absorption spectrometric method will supersede BS ISO 10204:2006 ISE/58

BS ISO 10303:— Industrial automation systems and integration. Product data representation and exchange

BS ISO 10303-58 Integrated generic resource. Risk

AMT/4

Application module. Approval AMT/4

Application module. Part and version identification AMT/4

AMT/4

DD ISO/TS 10303-1025 BS ISO 10303-61

Application module. Alias identification

Integrated generic resource. Systems engineering representation

AMT/4

AMT/4

DD ISO/TS 10303-1026 Application module. Assembly structure

BS ISO 10303-229

BS ISO 8695

Application protocol. Exchange of manufacturing product information for forged parts AMT/4

AMT/4

DD ISO/TS 10303-1027 Application module. Contextual shape positioning AMT/4


BS ISO 8820:—

Application module. Shape appearance layers

DD ISO/TS 10303-1022

CH/172/3

MTE/12

DD ISO/TS 10303-1009

DD ISO/TS 10303-1012


Tools for pressing. Punches. Nomenclature and terminology

DD ISO/TS 10303-1008 Application module. Layer assignment

MHE/3/5

BS ISO 8596

DD ISO/TS 10303-1007

BS ISO 10303-233 Systems engineering data representation

DD ISO/TS 10303-1032

AMT/4

Application module. Shape property assignment AMT/4

Road vehicles. Fuse-links

BS ISO 10303-1264 BS ISO 8820-4

Application module. Risk

DD ISO/TS 10303-1040

Fuse-links with female contacts (Type A) and bolt-in contacts (Type B) and their test fixtures

AMT/4

Application module. Process property assignment

AUE/16

AMT/4

BS ISO 10303-1785 Application module. Analysis representation

BS ISO 8873:—

AMT/4

Application module. Product class

Rigid cellular plastics

BS ISO 8873-1 Spray-applied polyurethane foam for thermal insulation PRI/72

DD ISO/TS 10303-1103 AMT/4

DD ISO/TS 10303:— Industrial automation systems and integration. Product data representation and exchange

DD ISO/TS 10303-1104 Application module. Specified product AMT/4

DD ISO/TS 10303-403 Application module. AP203 Configuration controlled 3D design of mechanical parts and assemblies

DD ISO/TS 10303-1106

AMT/4

AMT/4

BS ISO 9241-129

DD ISO/TS 10303-1001

DD ISO/TS 10303-1109

Guidance on software individualization

Application module. Appearance assignment

Application module. Alternative solution

PH/9

AMT/4

AMT/4

BS ISO 9241:— Ergonomic requirements for office work with visual display terminals (VDTs)

30


Application module. Extended measure representation


DD ISO/TS 10303-1110

DD ISO/TS 10303-1252

DD ISO/TS 10303-1433

Application module. Surface conditions

Application module. Probability

Application module. Project management

AMT/4

AMT/4

AMT/4

DD ISO/TS 10303-1255

DD ISO/TS 10303-1434

Application module. State definition

Application module. Project management resource information

DD ISO/TS 10303-1111 Application module. Classification with attributes

AMT/4

AMT/4

AMT/4

DD ISO/TS 10303-1256 DD ISO/TS 10303-1112 Application module. Specification control AMT/4

DD ISO/TS 10303-1115 Application module. Part collection AMT/4

Application module. State observed

DD ISO/TS 10303-1435

AMT/4

Application module. Organization structure AMT/4

DD ISO/TS 10303-1262 Application module. Task specification

DD ISO/TS 10303-1436

AMT/4

Application module. Project breakdown AMT/4

DD ISO/TS 10303-1274 Application module. Probability distribution

DD ISO/TS 10303-1129

AMT/4

Application module. Schedule

Application module. External properties AMT/4

DD ISO/TS 10303-1437

DD ISO/TS 10303-1275

AMT/4

Application module. External class

DD ISO/TS 10303-1130

DD ISO/TS 10303-1438

AMT/4

Application module. Work structure

Application module. Derived shape element AMT/4

DD ISO/TS 10303-1131 Application module. Construction geometry AMT/4

DD ISO/TS 10303-1281 Application module. Resource item characterized

DD ISO/TS 10303-1450

AMT/4

Application module. System structure AMT/4

DD ISO/TS 10303-1282

DD ISO/TS 10303-1132

Application module. Resource management characterized

Application module. Associative text

AMT/4

DD ISO/TS 10303-1283 Application module. Text appearance AMT/4

DD ISO/TS 10303-1140 Application module. Requirement identification and version AMT/4

Application module. Resource as realized characterized

Application module. Draughting annotation AMT/4

Application module. Physical breakdown AMT/4

DD ISO/TS 10303-1509 Application module. Manifold surface AMT/4

DD ISO/TS 10303-1291

DD ISO/TS 10303-1514

Application module. Plib class reference AMT/4

Application module. Advanced boundary representation AMT/4

DD ISO/TS 10303-1342 AMT/4

DD ISO/TS 10303-1345 Application module. Item definition structure

DD ISO/TS 10303-1215

Application module. Function based behaviour

AMT/4

Application module. Expression

DD ISO/TS 10303-1206

DD ISO/TS 10303-1453 AMT/4

AMT/4

DD ISO/TS 10303-1136

AMT/4

AMT/4

DD ISO/TS 10303-1628 Application module. Design product data management AMT/4

DD ISO/TS 10303-1654 Application module. Characteristic

DD ISO/TS 10303-1349

DD ISO/TS 10303-1216

Application module. Incomplete data reference mechanism

Application module. Functional breakdown

AMT/4

AMT/4

DD ISO/TS 10303-1655 Application module. Chemical substance AMT/4

AMT/4

DD ISO/TS 10303-1366 DD ISO/TS 10303-1231

Application module. Tagged text representation

DD ISO/TS 10303-1667

Application module. Product data management

AMT/4

Application module. Extended basic geometry AMT/4

AMT/4

DD ISO/TS 10303-1367 DD ISO/TS 10303-1233 Application module. Requirement assignment AMT/4

DD ISO/TS 10303-1248

Application module. Textual expression representation AMT/4

DD ISO/TS 10303-1681 Application module. Generic material aspects AMT/4

DD ISO/TS 10303-1371 Application module. State based behaviour representation

DD ISO/TS 10303-1702

Application module. Product breakdown AMT/4

AMT/4

AMT/4



Application module. Manifold subsurface

31

New Work Started continued... DD ISO/TS 10303-1715

BS ISO 10816:—


Application module. Part occurrence

Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts

Identification cards. Optical memory cards. General characteristics


BS ISO/IEC 11693-1

Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min

Co-existence of optical memory with other machine-readable technologies

AMT/4

DD ISO/TS 10303-1749 Application module. Styled curve AMT/4

DD ISO/TS 10303-1750 Application module. Text representation

IST/17

will supersede BS ISO 10816-2:2001 GME/21/5

BS ISO 11783:—

DD ISO/TS 10303-1753

BS ISO 10927

Tractors and machinery for agriculture and forestry. Serial control and communications data network

Application module. Value with unit extension AMT/4

Determination of molecular mass and molecular mass distribution of polymer species by matrixassisted laser desorption/ionization time-offlight mass spectrometry (MALDITOF-MS)

DD ISO/TS 10303-1760

PRI/21

Application module. Pre defined product data management specializations

BS ISO 10944

AMT/4

Ophthalmic instruments. Synoptophores

AMT/4

CH/172/6

Application module. Generic product occurrence AMT/4

DD ISO/TS 10303-1784 Application module. External analysis representation AMT/4

Sequence control AGE/32


DD ISO/TS 10303-1762

BS ISO 11783-14

BS ISO 10972:— Cranes. Requirements for mechanisms

BS ISO 11981 Ophthalmic optics. Contact lenses and contact lens care products. Determination of physical compatibility of contact lens care products with contact lenses will supersede BS EN ISO 11981:1999 CH/172


BS ISO 12460:—

Mobile cranes

Wood-based panels. Determination of formaldehyde release

will supersede BS ISO 10972-1:1998 MHE/3/5

BS ISO 12460-5

BS ISO 10341 Ophthalmic instruments. Refractor heads

BS ISO 11093:—

Perforator method


Paper and board. Testing of cores

B/541


DD ISO/TS 12854

Ophthalmic instruments. Ophthalmometers

Determination of characteristics of concentric rotation



Gaseous media fire extinguishing systems. Physical properties and system design. Scaling factors for Class B fuels other than heptane

CH/172/6

PAI/11

BS ISO 10352

BS ISO 11237:—

Fibre-reinforced plastics. Moulding compounds and prepregs. Determination of mass per unit area

Rubber hoses and hose assemblies. Wire-braidreinforced compact types for hydraulic applications. Specification

CH/172/6

BS ISO 10343

FSH/18/6

BS ISO 12856 Plastic railway sleepers RAE/2

will supersede BS EN ISO 10352:1997 PRI/42

BS ISO 11237-1 (Revision) Oil-based fluid applications



Identification cards. Test methods

PRI/66

PD ISO/TR 12888:— Selected illustrations of gauge repeatability and reproducibility studies

PD ISO/TR 12888-1 BS ISO/IEC 10373-6 (Revision) Proximity cards will supersede BS ISO/IEC 10373-6:2001+A5:2007 IST/17

BS ISO 11237-2 (Revision) Water-based fluid applications

Continuous variables SS/4


BS ISO 13351

PRI/66

Fans for general purposes. Dimensions

BS ISO 10685:— Ophthalmic optics. Spectacle frames electronic catalogue and identification

BS ISO 11339

BS ISO 10685-2


Data specification

PRI/52

Adhesives. T-peel test for flexible-to-flexible bonded assemblies

MCE/17

DD ISO/TS 13584:— Industrial automation systems and integration. Parts library

CH/172/3

BS ISO 10810


BS ISO 11382 Optical materials and components. Characterization of optical materials used in the infrared spectral range from 0,78 um to 100 um

DD ISO/TS 13584-35

Surface chemical analysis. X-ray photoelectron spectroscopy. Guidelines for analysis CII/60

CPW/172/3

AMT/4

32


Implementation resources. Spreadsheet data interface for parts library


BS ISO 14660:—

BS ISO 16063:—

BS ISO 21748

Geometrical Product Specifications (GPS). Geometrical features

Methods for the calibration of vibration and shock transducers

Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation

BS ISO 14660-3 Extracted centre of a sphere TDW/4

will supersede DD ISO/TS 21748:2004

BS ISO 16063-41 GME/21/2

BS ISO 14708:— Implants for surgery. Active implantable medical devices

DD ISO/TS 16457

BS ISO 14708-5

Earth’s ionosphere and plasmasphere. Model of distribution of density, temperature and effective collision frequency of electrons

Circulatory support devices

ACE/68/-/4

CH/150/6

Particular requirements for active implantable medical devices intended to treat tachyarrhythmia (including implantable defibrillators) CH/150/6

BS ISO 15063 Plastics. Polyols for use in the production of polyurethanes. Determination of hydroxyl number by NIR spectroscopy PRI/42

BS ISO 21749 Measurement uncertainty for metrological applications. Repeated measurements and nested experiments will supersede DD ISO/TS 21749:2005 SS/6

BS ISO 22390:— BS ISO 16895:—

BS ISO 14708-6

SS/6

Calibration of laser vibrometers

Wood-based panels. Dry process fibreboard

BS ISO 16895-2 Requirements

Timber structures. Laminated veneer lumber (LVL)

BS ISO 22390-1 Structural properties B/518

B/541

BS ISO 16992 (Revision) Passenger car tyres. Spare unit substitutive equipment (SUSE) will supersede BS ISO 16992:2006

DD ISO/TS 22745:— Industrial automation systems and integration. Open technical dictionaries and their application to master data

AUE/4

DD ISO/TS 22745-11

BS ISO 15254 Ophthalmic optics and instruments. Electrooptical devices for enhancing low vision will supersede BS EN ISO 15254:2002 CH/172/6

Guidelines for the formulation of terminology

BS ISO 18280

AMT/4

Plastics. Epoxy resins. Test methods PRI/42

DD ISO/TS 22745-13 Identification of concepts and terminology

DD ISO/TS 15869

BS ISO 19142

Gaseous hydrogen and hydrogen blends. Land vehicle fuel tanks

Geographic information. Web feature service

PD ISO/TR 22849

IST/36

PVE/3/8

BS ISO 16014:— Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography


Design recommendations for bevel gears

BS ISO 19143

PRI/21

IST/36


PD ISO/IEC TR 20000:—

Health informatics. Guidelines on data protection to facilitate trans-border flows of personal health information

Information technology. Service management

IST/35

Process Reference Model

BS ISO 16014-2 (Revision) will supersede BS ISO 16014-2:2003 PRI/21


PD ISO/IEC TR 20000-4 IST/15/-/8

Universal calibration method

MCE/5/-/13

Geographic information. Filter encoding

General principles will supersede BS ISO 16014-1:2003

AMT/4

PD ISO/IEC TR 20000-5 Exemplar of an ISO/IEC 20000 Incremental Implementation Plan

BS ISO 22867 Forestry machinery. Vibration test code for portable hand-held machines with internal combustion engine. Vibration at the handles will supersede BS EN ISO 22867:2006 AGE/29

IST/15/-/8

BS ISO 16014-3 (Revision) Low-temperature method will supersede BS ISO 16014-3:2003

BS ISO 20152:—

BS ISO 24917 Space systems. General test requirements for launch vehicles

PRI/21

Timber structures. Bond performance of adhesives


BS ISO 20152-1

High-temperature method

Basic requirements


B/518

Titanium pipes and tubes. Non-destructive testing

BS ISO 21581

BS ISO 25902-2

Light-scattering method

Timber structures. Static and cyclic lateral load testing of shear walls

Ultrasonic examination for the detection of longitudinal flaws

PRI/21

B/518

NFE/35

ACE/68/-/2

BS ISO 25902:—

PRI/21

BS ISO 16014-5



33

New Work Started continued... BS ISO 26367:—

BS ISO 28803

DD IEC/PAS 61169-35

Guidelines for assessing the adverse environmental impact of fire effluents

Ergonomics of the physical environment. Application of international standards to people with special requirements

Sectional specification. Radio frequency coaxial connectors of type 2, 92

BS ISO 26367-1

PH/9

Fundamentals FSH/16

BS ISO 29002:—

BS ISO/IEC 27001 (Revision)

Industrial automation systems and integration. Exchange of characteristic data

Information technology. Security techniques. Information security management systems. Requirements

BS ISO 29002-5

will supersede BS ISO/IEC 27001:2005 IST/33

BS ISO/IEC 27033:— Information technology. Security techniques. IT network security

Sectional specification. Radio frequency coaxial connectors of type CQA EPL/46/2

DD IEC/PAS 61169-42

AMT/4

Sectional specification. Radio frequency coaxial connectors of type CQN

BS ISO/IEC 29128 Information technology. Security techniques. Verification of cryptographic protocols

BS ISO/IEC 27033-3

IST/33

DD IEC/PAS 61169-41

Identification scheme

IST/33

Reference networking scenarios. Risks, design techniques and control issues

EPL/46/2

BS ISO/IEC 29146 Information technology. Security techniques. A framework for access management

EPL/46/2

DD IEC/PAS 62596 Electrotechnical products. Guideline for sampling procedure for determination of restricted substances in electrotechnical products GEL/111

IST/33

BS IEC 62598

BS ISO/IEC 27033-4 Securing communications between networks using security gateways. Risks, design techniques and control issues

PD ISO/IEC TR 29149

IST/33

IST/33

BS ISO/IEC 27033-5 Securing remote access. Risks, design techniques and control issues IST/33

Information technology. Security techniques. Best practices for time stamping services

BS ISO/IEC 29150

Nuclear instrumentation. Constructional requirements and classification of radiometric gauges NCE/2

PD 6705-3

Information technology. Security techniques. Signcryption

Recommendations for the execution of aluminium structures to BS EN 1090-3

IST/33

B/525/9

BS ISO 29262

PAS 100 (Revision)

Production equipment for microsystems. Interface between grippers and handling system

Specification for composted materials

BS ISO/IEC 27033-6 Securing communications across networks using Virtual Private Networks (VPNs). Risks, design techniques and control issues IST/33

will supersede PAS 100:2005

MTE/1

NA to BS EN 1995:—

BS ISO 27468 Nuclear fuel technology. Criticality evaluation methodology for PWR burn up credit (BUC)

DD ISO/TS 29584

NCE/9

Glass in building. Technical specification. Pendulum impact testing and classification of safety glass for use in buildings

BS ISO 27730

B/520

Information and documentation. International standard collection identifier (ISCI) IDT/2/18

UK National Annex to Eurocode 5. Design of timber structures

NA to BS EN 1995-1-1:2004/ Amendment 1 General. Common rules and rules for buildings

DD IEC/TS 60318:—

B/525/5

Electroacoustics. Simulators of human head and ear

BS ISO 27769:— Wood-based panels. Wet process fibreboard

DD IEC/TS 60318-7

BS ISO 27769-2

Head and torso simulator for acoustic measurements of air-conduction hearing aids

Specifications

EPL/29

B/541

BS ISO 27875 Space systems. Re-entry risk management for unmanned spacecraft and launch vehicle orbital stages

DD IEC/PAS 61169:—

You! Always quote your Customer Number

Radio-frequency connectors

DD IEC/PAS 61169-18

ACE/68

Sectional specification. Radio frequency coaxial connectors of type SSMA

BS ISO 28802

EPL/46/2

Ergonomics of the physical environment. The assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people

DD IEC/PAS 61169-19

PH/9

EPL/46/2

34

Help Us to Help

Sectional specification. Radio frequency coaxial connectors of type SSMB


Don’t know your number? Contact Customer Services 020 8996 9001 who will be happy to check it for you


DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT – NATIONAL BRITISH STANDARDS You may now comment on any National British Standard online. BSI British Standards has launched a Draft Review system which allows access to the drafts of all National British Standards. To enhance access of Drafts for Public Comment for the wider community, make comments more visible and move into collaborative working practices, you will now be able to comment on any National British Standard by visiting http://www.bsigroup.com/drafts. All you need to do is register. This service is free of charge.

08/30164455 DC

08/30087642 DC

Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents. Part 3-1. Selfcontained open-circuit compressed air breathing apparatus incorporating a hood for escape. Specification

BS ISO 10140-1

PH/4

08/30087646 DC

BS 8468-3-1

Acoustics. Laboratory measurement of sound insulation of building elements. Part 1. Test codes EH/1/6

Acoustics. Laboratory measurement of sound insulation of building elements. Part 2. Measurement of airborne sound insulation BS ISO 10140-2

08/30180387 DC Guide to good practice in commissioning accessible websites BS 8878

IST/45

EH/1/6

08/30180523 DC

08/30087650 DC

BS 8517 The

BS ISO 10140-3

use of general purpose security dogs. Code of practice GW/3/-/15

08/30182996 DC Design for manufacturing, assembly, disassembly and end-of-life processing. Part 2. Vocabulary

Acoustics. Laboratory measurement of sound insulation of building elements. Part 3. Measurement of impact sound insulation EH/1/6

BS 8887-2

Please note that the only standards available on this service are pure British Standards (National Standards e.g: BS XXXX). European and international documents are not included at this time.

TDW/4

08/30193234 DC Code of practice for the provision of lone worker services BS 8484

Deadlines for receipt of comments on each of the individual drafts can be found at http://www.bsigroup.com/drafts. The deadline for the following drafts is 31 January, 2009 unless otherwise stated. Should you wish to receive these drafts in hard copy format, they are available for a fee from BSI Customer Services (see ’How to order’ on page 2).

08/30113948 DC BS 2482

Specification for timber scaffold

boards

Surface boxes, guards and underground chambers for utilities purposes. Part 1. Specification for guards and plinths

measurement of sound insulation of building elements. Part 5. Requirements for test facilities and equipment

DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT – ADOPTIONS All Draft British Standards are available from BSI Customer Services (see ’How to order’ on page 2)

08/30099651 DC Respiratory protective devices. Methods of test and test equipment. Part 1. Determination of inward leakage BS ISO 16900-1

PH/4

08/30099655 DC

Larger draft documents are charged at a higher price according to the number of pages and are priced individually below.

PH/4

BS 5834-2

B/504

Draft standards may be modified before adoption and issue as British Standards.

Surface boxes, guards and underground chambers for utilities purposes. Part 2. Specification for boxes

EH/1/6

Most drafts are charged at £10.00 to members and £20.00 to non-members.

Comments are welcome and should be sent to Debbie Stead, Head of Committee Service Centre – Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL by 31 January, 2009 unless otherwise stated, to be considered by the relevant BSI committee.

08/30142158 DC

EH/1/6

BS ISO 10140-5 Acoustics. Laboratory

BS 5834-1

B/504

Acoustics. Laboratory measurement of sound insulation of building elements. Part 4. Measurement procedures and requirements BS ISO 10140-4

08/30087659 DC

GW/3

B/514/42

08/30142156 DC

08/30087655 DC

Respiratory protective devices. Methods of test and test equipment. Part 3. Determination of particle filter penetration BS ISO 16900-3

08/30099658 DC Respiratory protective devices. Methods of test and test equipment. Part 4. Determination of gas filter capacity BS ISO 16900-4

PH/4

08/30128080 DC Software asset management. Part 2. Software identification tag £18.00 members, £36.00 non-members BS ISO/IEC 19770-2

IST/15

08/30142165 DC

08/30017005 DC

Surface boxes, guards and underground chambers for utilities purposes. Part 4. Specification for utility chambers

BS EN ISO 10848-4

BS 5834-4

B/504

08/30154716 DC Structural use of timber. Part 6-2. Code of practice for timber frame walls. Buildings other than dwellings not exceeding four storeys

Acoustics. Laboratory measurement of the flanking transmission of airborne and impact noise between adjoining rooms. Part 4. All other cases

Comments for the above document are required by 28 February, 2009

08/30144212 DC BS ISO 4986 Steel

EH/1/6


and iron casting. Magnetic

particle inspection ISE/6

BS 5268-6-2 AMD1

B/525


08/30084137 DC

08/30144215 DC

BS ISO 22538-6 Space

systems. Oxygen safety. Part 6. Facility planning and implementation

BS ISO 4987 Steel

ACE/68

ISE/6


and iron castings. Liquid penetrant inspection

35

Draft British Standards for Public Comment continued... 08/30147086 DC

08/30165412 DC

08/30167126 DC

BS ISO 690 Information

BS ISO 5610-8

Tool holders with rectangular shank for indexable inserts. Part 8. Style K

BS EN ISO 14171

and documentation. Guidelines for bibliographic references and citations to information resources

MTE/18

IDT/2/2

08/30153135 DC Radiation protection. Performance criteria for radiobioassay BS ISO 28218

NCE/2


08/30165416 DC Tool holders with rectangular shank for indexable inserts. Part 9. Style L

Welding consumables. Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels. Classification WEE/39

BS ISO 5610-9

08/30167362 DC

MTE/18

BS ISO 10710 Water

08/30165420 DC

EH/3/5

BS ISO 5610-10 Tool

08/30159962 DC Structural timber. Determination of characteristic values of mechanical properties and density BS EN 384

B/518

holders with rectangular shank for indexable inserts. Part 10. Style N

quality. Growth inhibition test with the marine and brackish water macroalgae Ceramium tenuicorne

MTE/18

08/30165424 DC Tool holders with rectangular shank for indexable inserts. Part 11. Style R BS ISO 5610-11

08/30167904 DC Tyres (ply rating marked series) and rims for agricultural tractors and machines. Part 1. Tyre designation and dimensions, and approved rim contours BS ISO 4251-1 AMD1

AUE/4

08/30161152 DC

MTE/18


Protective footwear for motorcycle riders. Requirements and test methods

08/30165427 DC

08/30167985 DC

PH/1

BS ISO 5610-12

Tool holders with rectangular shank for indexable inserts. Part 12. Style S

BS ISO 8664 AMD1

BS EN 13634

08/30164483 DC quality. Determination of 16 polycyclic aromatic hydrocarbons (PAH) in water. Method using gas chromatography with mass spectrometric detection (GC-MS)

MTE/18

BS ISO 28540 Water

EH/3/2

Tyres for agricultural tractors and machines. Code-designated and service-description marked radial drive-wheel tyres AUE/4

BS ISO 5610-13


MTE/18

08/30169640 DC

08/30165431 DC Tool holders with rectangular shank for indexable inserts. Part 13. Style T

Measurement of fluid flow in closed conduits. Ultrasonic meters for gas. Part 1. Meters for custody transfer and allocation measurement BS ISO 17089-1

08/30165376 DC Tool holders with rectangular shank for indexable inserts. Part 1. General survey, correlation and determination of dimensions BS ISO 5610-1

08/30165435 DC Tool holders with rectangular shank for indexable inserts. Part 14. Style H BS ISO 5610-14

MTE/18

MTE/18

08/30165388 DC Tool holders with rectangular shank for indexable inserts. Part 2. Style A BS ISO 5610-2

08/30165441 DC BS ISO 5610-15 Tool

holders with rectangular shank for indexable inserts. Part 15. Style V

Tool holders with rectangular shank for indexable inserts. Part 3. Style B BS ISO 5610-3

MTE/18

08/30165395 DC


08/30169888 DC

08/30166507 DC

of food and animal feeding stuffs. Preparation of test samples, initial suspension and decimal dilutions for microbiological examination. Part 5. Specific rules for the preparation of milk and milk products

BS ISO 10580 Resilient,

AW/9

MTE/18

MTE/18

08/30165392 DC

CPI/30/5

textile and laminate floor coverings. Test method for emissions of volatile organic compounds (VOC)

BS EN ISO 6887-5 Microbiology


PRI/3

08/30169896 DC 08/30166847 DC

BS EN 61907 Guidance on

MTE/18

Lasers and laser-related equipment. Test methods for laser radiationinduced damage threshold. Part 1. Definitions and general principles

DS/1

08/30165399 DC

CPW/172/9

Tool holders with rectangular shank for indexable inserts. Part 4. Style D BS ISO 5610-4

BS ISO 21254-1

BS ISO 5610-5 Tool

holders with rectangular shank for indexable inserts. Part 5. Style F MTE/18

08/30165402 DC BS ISO 5610-6 Tool

holders with rectangular shank for indexable inserts. Part 6. Style G

08/30166853 DC Lasers and laser-related equipment. Test methods for laser radiationinduced damage threshold. Part 3. Assurance of laser power (energy) handling capabilities BS ISO 21254-3

CPW/172/9

communication network dependability engineering

08/30170398 DC Milk and milk products. Determination of the minimal inhibitory concentration (MIC) of antibiotics applicable to bifidobacteria and non-enterococcal lactic acid bacteria (LAB) BS ISO 10932

AW/5


MTE/18

08/30167121 DC

08/30170415 DC

BS ISO 5610-7 Tool

holders with rectangular shank for indexable inserts. Part 7. Style J

Welding consumables. Fluxes for submerged arc welding and electroslag welding. Classification

Water quality. Sampling. Part 21. Guidance on sampling of drinking water distributed by tankers or means other than distribution pipes

MTE/18

WEE/39

EH/3/6

08/30165406 DC

36

BS EN ISO 14174


BS ISO 5667-21


08/30170610 DC

08/30179725 DC

08/30185788 DC

BS EN ISO 12543-5 Glass

in building. Laminated glass and laminated safety glass. Part 5. Dimensions and edge finishing

BS EN 1889-2 AMD1

Machines for underground mines. Mobile machines working underground. Safety. Part 2. Rail locomotives

BS EN 15864

B/520/1

MRE/1

08/30172385 DC Road vehicles. Component test methods for electrical disturbances from narrowband radiated electromagnetic energy. Part 11. Radiated immunity test method using a reveberation chamber

Comments for the above document are required by 31 December, 2008

BS ISO 11452-11

AUE/16

08/30172620 DC BS EN ISO 8536-6 Infusion equipment for

medical use. Part 6. Freeze drying closures for infusion bottles

08/30179728 DC Underground mining machinery. Specification for the safety requirements of armoured face conveyors MRE/1


08/30179770 DC

08/30172647 DC

MCE/3/12

BS EN 12545 AMD1

Plain bearings. Thin walled half bearings with or without flange. Part 2. Measurement of wall-thickness and flange thickness BS ISO 3548-2

MCE/12


08/30174756 DC Safety of machine tools. Milling machines (including boring machines) BS EN 13128 AMD2

MTE/1

08/30175103 DC Water quality. Determination of selected plant treatment agents and biocide products. Method using solid-phase microextraction (SPME) followed by gas chromatography-mass spectrometry (GC-MS) BS ISO 27108

EH/3/2

08/30177295 DC Welding consumables. Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels. Classification BS ISO 14341

08/30180269 DC Admixtures for concrete, mortar and grout. Part 2. Concrete admixtures. Definitions, requirements, conformity, marking and labelling BS EN 934-2

B/517/3

08/30180275 DC Admixtures for concrete, mortar and grout. Part 4. Admixtures for grout for prestressing tendons. Definitions, requirements, conformity, marking and labelling BS EN 934-4

B/517/3

08/30182118 DC Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV A.C. and not exceeding 36 kV A.C. Part 3. Guide to use GEL/20/16

08/30182125 DC BS ISO 10679

PH/4


Test methods for determining the contribution to the fire resistance of structural members. Part 2. Vertical protective membranes BS EN 13381-2

08/30186609 DC Test methods for determining the contribution to the fire resistance of structural members. Part 3. Applied protection to concrete members BS EN 13381-3

08/30186613 DC BS EN 13381-5 Test

methods for determining the contribution to the fire resistance of structural members. Part 5. Applied protection to concrete/profiled sheet steel composite members FSH/22

08/30186617 DC BS EN 13381-6 Test

methods for determining the contribution to the fire resistance of structural members. Part 6. Applied protection to concrete filled hollow steel columns FSH/22

Steel. Cast tool steel

ISE/6

08/30186620 DC BS EN 13381-7 Test

08/30183528 DC Monitoring and alarm receiving centre. Part 2. Requirements for technical facilities BS EN 50518-2

methods for determining the contribution to the fire resistance of structural members. Part 7. Applied protection to timber members FSH/22

GW/1/11

08/30186890 DC Characterization of waste. Compliance leaching test. One stage batch leaching test for monoliths at a fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions BS EN 15862

Respiratory protective devices. Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only. Requirements, testing, marking

08/30186605 DC

BS EN 50397-3

08/30185782 DC BS EN 1827 AMD1

Aluminium and aluminium alloys. Chemical composition and form of wrought products. Part 3. Chemical composition and form of products BS EN 573-3

FSH/22

WEE/39

08/30178269 DC

08/30186451 DC

FSH/22

BS ISO 8729-2

08/30173839 DC


NFE/35/5

CH/212

EPL/80

B/508/3

BS EN 12321 AMD1

Footwear, leather and imitation leather goods manufacturing machines. Noise test code. Common requirements

Ships and marine technology. Marine radar reflectors. Part 2. Active type

Characterisation of waste. Leaching behaviour test for basic characterization. Dynamic monolithic leaching test with continuous leachant renewal under conditions relevant for specified scenario(s)

B/508/3


08/30185785 DC BS EN 61169-40 Radio-frequency

connectors. Part 40. Sectional specification for 2.4 series R.F connectors

Characterisation of waste. Leaching behaviour test for basic characterisation. Dynamic monolithic leaching test with periodic leachant renewal, under fixed test conditions

EPL/46/2

B/508/3

BS EN 12490 Durability

of wood and woodbased products. Preservative-treated solid wood. Determination of the penetration and retention of creosote in treated wood B/515

08/30186893 DC Wood preservatives. Creosote and creosoted timber. Methods of sampling and analysis. Part 1. Procedure for sampling creosote BS EN 1014-1

B/515

BS EN 15863

08/30178500 DC





08/30186896 DC Wood preservatives. Creosote and creosoted timber. Methods of sampling and analysis. Part 2. Procedure for obtaining a sample of creosote from creosoted timber for subsequent analysis BS EN 1014-2

B/515

37


08/30188437 DC

08/30188793 DC

BS EN 1014-3

Wood preservatives. Creosote and creosoted timber. Methods of sampling and analysis. Part 3. Determination of the benzo[a]pyrene content of creosote

BS EN 13766 Thermoplastic

BS EN 50525-2-31

B/515

PRI/66

multi-layer (nonvulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas. Specification

Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 2-31. Cables for general applications. Single core non-sheathed cables with thermoplastic PVC insulation GEL/20/17

08/30186903 DC

08/30188440 DC

BS EN 1014-4

Wood preservatives. Creosote and creosoted timber. Methods of sampling and analysis. Part 4. Determination of the waterextractable phenols content of creosote

BS EN 1911

B/515

EH/2/1

08/30187190 DC BS EN 13888

Grouts for tiles. Definitions and

specifications B/539

08/30187193 DC

Stationary source emissions. Determination of mass concentration of gaseous chlorides expressed as HCl. Standard reference method

08/30188443 DC Electronic fee collection. Conformity evaluation of on board unit and roadside equipment to EN 15509. Part 1. Test suite structure and test purposes £18.00 members, £36.00 non-members BS EN 15876-1

EPL/278

RHE/2


08/30187196 DC

08/30188764 DC

Wood and parquet flooring. Determination of bending strength under static load. Test methods

BS EN 50525-1

BS EN 1533

B/543

Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 1. General requirements GEL/20/17

08/30187552 DC BS EN 13306 Maintenance.

Maintenance


terminology

08/30188771 DC Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 2-11. Cables for general applications. Flexible cables with thermoplastic PVC insulation BS EN 50525-2-11

08/30187719 DC Vehicle lifts

MHE/12

GEL/20/17

08/30187745 DC BS EN 12566-6 Small

wastewater treatment systems for up to 50 PT. Part 6. Prefabricated treatment units for septic tank effluent B/505

08/30187751 DC Chimneys. Clay/ceramic flue liners. Part 1. Flue liners operating under dry conditions. Requirements and test methods BS EN 1457-1

B/506/3

Chimneys. Clay ceramic flue liners. Part 2. Flue liners operating under wet conditions. Requirements and test methods BS EN 1457-2

B/506/3

08/30188125 DC


08/30188799 DC Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 2-42. Cables for general applications. Single core non-sheathed cables with crosslinked EVA insulation BS EN 50525-2-42

GEL/20/17


08/30188804 DC Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 2-51. Cables for general applications. Oil resistant control cables with thermoplastic PVC insulation

08/30188779 DC Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 2-12. Cables for general applications. Extensible leads with thermoplastic PVC insulation BS EN 50525-2-12

GEL/20/17


08/30188783 DC Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 2-21. Cables for general applications. Flexible cables with crosslinked elastomeric insulation BS EN 50525-2-21

GEL/20/17

FSH/22

08/30188146 DC Continuously organic coated (coil coated) steel flat products. Technical delivery conditions BS EN 10169

GEL/20/17


08/30188810 DC

Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware. Part 3. Timber hinged and pivoted doorsets BS EN 15269-3

38

GEL/20/17


08/30187754 DC

ISE/10

Low voltage energy cables of rated voltages up to and including 450/750 V. Part 2-41. Cables for general applications. Single core cables with crosslinked silicone rubber insulation

BS EN 50525-2-51

DS/1

BS EN 1493

08/30188796 DC BS EN 50525-2-41

BS EN 15871

Ventilation for buildings. Fire resisting duct sections



Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 2-71. Cables for general applications. Flat tinsel cables (cords) with thermoplastic PVC insulation BS EN 50525-2-71

GEL/20/17


08/30188813 DC Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 2-72. Cables for general applications. Flat divisible cables (cords) with thermoplastic PVC insulation BS EN 50525-2-72

GEL/20/17


08/30188788 DC

08/30188818 DC

BS EN 50525-2-22

Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 2-22. Cables for general applications. High flexibility braided cables with crosslinked elastomeric insulation

BS EN 50525-2-81

GEL/20/17

GEL/20/17




Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 2-81. Cables for general applications. Cables with crosslinked elastomeric covering for arc welding


08/30188821 DC

08/30189949 DC

08/30190898 DC

Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 2-82. Cables for general applications. Cables with crosslinked elastomeric insulation for decorative chains

BS EN 61558-2-20 Safety

BS EN 60745-2-14 AMD

GEL/20/17

PEL/96



08/30188826 DC

08/30190494 DC

CPL/61/6

Pulps. Determination of limiting viscosity number in cupri-ethylenediamine (CED) solution

08/30190906 DC

BS EN 50525-2-82

Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 2-83. Cables for general applications. Multicore cables with crosslinked silicone rubber insulation BS EN 50525-2-83

of transformers, reactors, power supply units and similar products for supply voltages up to 1100 V. Part 2-20. Particular requirements and tests for small reactors

08/30188833 DC Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 3-11. Cables with special fire performance. Flexible cables with halogen-free thermoplastic insulation, and low emission of smoke BS EN 50525-3-11

GEL/20/17


PAI/11

08/30190636 DC

Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 3-21. Cables with special fire performance. Flexible cables with halogen-free crosslinked insulation, and low emission of smoke

Gas cylinders. Cylinder bundles. Design, manufacture, identification and testing PVE/3/7

Comments for the above document are required by 9 January, 2009

MHE/3/5


08/30190664 DC Cranes. Controls. Layout and characteristics. Part 1. General principles BS ISO 7752-1

MHE/3/5

Pulps. Determination of pH of salted water extracts

Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 3-41. Cables with special fire performance. Single core nonsheathed cables with halogen-free crosslinked insulation, and low emission of smoke GEL/20/17


08/30189945 DC Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1100 V. Part 2-12. Particular requirements and tests for constant voltage transformers and power supply units incorporating constant voltages transformers BS EN 61558-2-12

PEL/96



CPL/61/6

Hand-held motor operated electric tools. Safety. Part 2-3. Particular requirements for grinders, polishers and disk-type sanders CPL/61/6

08/30190915 DC Hand-held motor operated electric tools. Safety. Part 2-4. Particular requirements for sanders and polishers other than disk type BS EN 60745-2-4 AMD

CPL/61/6

Polypropylene (PP) pipes. Effect of time and temperature on expected strength BS ISO 3213

PRI/88/4

PAI/11

08/30190974 DC 08/30190684 DC BS ISO 18436-5 Condition monitoring and

diagnostics of machines. Requirements for qualification and assessment of personnel. Part 5. Lubricant laboratory technician/analyst

Digital cinema (D-cinema) distribution master. Part 9. Image pixel structure level 3. Serial digital interface signal formatting BS ISO 26428-9

CPW/36

GME/21/7



08/30190977 DC Digital cinema (D-cinema) packaging. Part 8. Packing list BS ISO 26429-8

08/30188842 DC BS EN 50525-3-41

Hand-held motor operated electric tools. Safety. Part 2-21. Particular requirements for drain cleaners BS EN 60745-2-21 AMD

08/30190962 DC BS ISO 29681


08/30190909 DC

BS EN 60745-2-3 AMD

08/30190670 DC

GEL/20/17

CPL/61/6

08/30190912 DC


Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V. Part 3-31. Cables with special fire performance. Single core nonsheathed cables with halogen-free thermoplastic insulation, and low emission of smoke

Hand-held motor operated electric tools. Safety. Part 2-20. Particular requirements for band saws BS EN 60745-2-20 AMD

Cranes. Controls. Layout and characteristics. Part 3. Tower cranes BS ISO 7752-3


BS EN 50525-3-31

Hand-held motor operated electric tools. Safety. Part 2-18. Particular requirements for strapping tools BS EN 60745-2-18 AMD

08/30190661 DC

GEL/20/17

08/30188839 DC

08/30190901 DC

BS ISO 10961

08/30188836 DC BS EN 50525-3-21

CPL/61/6

BS ISO 5351

GEL/20/17


Hand-held motoroperated electric tools. Safety. Part 2-14. Particular requirements for planers

08/30190852 DC Electromagnetic compatibility (EMC). Part 4-21. Testing and measurement techniques. Reverberation chamber test methods £18.00 members, £36.00 non-members BS EN 61000-4-21

GEL/210/12

CPW/36


08/30190980 DC Digital cinema (D-cinema) packaging. Part 9. Asset mapping and file segmentation BS ISO 26429-9

08/30190887 DC

CPW/36

Hand-held motor operated electric tools. Safety. Part 2-8. Particular requirements for shears and nibblers


BS EN 60745-2-8 AMD

CPL/61/6

08/30190989 DC BS ISO 26430-5 Digital cinema (D-cinema)

08/30190894 DC Hand-held motor operated electric tools. Safety. Part 2-9. Particular requirements for tappers BS EN 60745-2-9 AMD

CPL/61/6


operations. Part 5. Packaging. Security log event class and constraints CPW/36


39


08/30191324 DC

08/30191883 DC

BS ISO 26431-2

Digital cinema (D-cinema) quality. Part 2. Reference projector and environment

BS EN 61029-2-1 AMD

Safety of transportable motor-operated electric tools. Part 2-1. Particular requirements for circular saw benches

BS EN 60401-2

CPW/36

CPL/61/6

EPL/51


08/30191327 DC

08/30191891 DC

Safety of transportable motor-operated electric tools. Part 2-8. Particular requirements for single spindle vertical moulders BS EN 61029-2-8 AMD

08/30191123 DC Banking. Banking telecommunication messages. Bank identifier codes BS ISO 9362

IST/12


08/30191166 DC BS EN 60079-25 Explosive atmospheres.

Part 25. Intrinsically safe systems GEL/31/13

08/30191192 DC Explosive atmospheres. Part 20-1. Material characteristics. Gas and vapour classification, test methods and data BS EN 60079-20-1

GEL/31

BS EN 60444-6 Measurement

of quartz crystal unit parameters. Part 6. Measurement of drive level dependence (DLD) EPL/49

08/30191341 DC Boxes and enclosures for electrical accessories for household and similar fixed electrical installations. Part 24. Particular requirements for enclosures for housing protective devices and other power dissipating electrical equipment BS EN 60670-24 AMD1

PEL/23

08/30191365 DC Railway applications. Power supply and rolling stock. Technical criteria for the coordination between power supply (substation) and rolling stock to achieve interoperability BS EN 50388

Pallets for materials handling. Quality of assembly of new, wooden, flat pallets

GEL/86/2


08/30191907 DC Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of bactericidal activity against Legionella pneumophila of chemical disinfectants for aqueous systems. Test method and requirements (phase 2, step 1) CH/216

08/30192094 DC Aerospace series. Six lobe recess. Geometrical definition

PKW/0/-/11

08/30192115 DC

08/30191453 DC

interconnecting devices and passive components. Fibre optic filters. Generic specification

PEL/22

ACE/12

Methods of measurement for digital network. Performance characteristics of terrestrial digital multimedia transmission network

BS EN 61977 Fibre optic

Low voltage power supplies, D.C. output. Part 7. Safety requirements BS EN 61204-7 AMD1

BS ISO 18334

BS EN 62553

08/30191273 DC

08/30191902 DC

BS EN 3911

08/30191444 DC



PEL/99

BS EN 13623

08/30191251 DC

EPL/103

Power installations exceeding 1 kV A.C. Part 1. Common rules BS EN 61936-1

CPL/61/6

GEL/9/3

08/30191241 DC

Terms and nomenclature for cores made of magnetically soft ferrite. Part 2. Reference of dimensions

Assessment of human exposure at the workplace for persons bearing active implantable medical devices (AIMD) in electric, magnetic and electromagnetic fields with frequencies from 0 Hz to 300 GHz. Part 1. General

Aerospace series. Aluminium pigmented coatings for fasteners. Technical specification BS EN 4473

ACE/12

BS EN 50527-1

GEL/106

08/30191626 DC

08/30192124 DC Information technology. Multimedia application format (MPEG-A). Part 4. Musical slide show application format BS ISO/IEC 23000-4 AMD2

IST/37

BS ISO 27186 Active implantable medical

08/30192173 DC

devices. Four-pole connector system for implantable cardiac rhythm management devices. Dimensional and test requirements

BS EN 62542

CH/150/6

Environmental standardization for electrical and electronic products and systems. Standardization of environmental aspects. Glossary of terms GEL/111

08/30191281 DC Appliance couplers for household and similar general purposes. Part 2-4. Appliance couplers dependent on appliance weight for engagement BS EN 60320-2-4 AMD1

08/30191664 DC Earthing of power installations exceeding 1 kV A.C BS EN 50522

PEL/99

08/30192184 DC

08/30191694 DC Breathing system filters for anaesthetic and respiratory use. Part 2. Nonfiltration aspects BS EN ISO 23328-2

Electric cooking ranges, hobs, ovens and grills for household use. Methods for measuring performance BS EN 50304/60350 AMD

Houses. Description of performance. Part 4. Fire safety BS ISO 15928-4

PEL/23/3

08/30191289 DC


B/500

CH/121/5

08/30192220 DC BS EN 60335-1 AMD F1

CPL/59


08/30191292 DC

08/30191879 DC

BS EN 62077 Fibre optic

interconnecting devices and passive components. Fibre optic circulators. Generic specification

BS EN 3838

GEL/86/2

ACE/6



40

Aerospace series. Requirements and tests on user-applied markings on aircraft electrical cables


Household and similar electrical appliances. Safety. Part 1. General requirements CPL/61

08/30192250 DC Household and similar electrical appliances. Safety. Part 1. General requirements BS EN 60335-1 AMD F2

CPL/61


08/30192264 DC

08/30192512 DC

08/30192677 DC

Household and similar electrical appliances. Safety. Part 1. General requirements

BS EN ISO 10079-1

Medical suction equipment. Part 1. Electrically powered suction equipment. Safety requirements

BS EN 6059-307 Aerospace series. Electrical

CPL/61

CH/121/1

ACE/6



BS EN 60335-1 AMD F3

08/30192272 DC Household and similar electrical appliances. Safety. Part 1. General requirements BS EN 60335-1 AMD F4

CPL/61

08/30192276 DC Space systems. Space environment (natural and artificial). Model of the Earth’s magnetospheric magnetic field BS ISO 22009

ACE/68


08/30192282 DC

08/30192541 DC

Information technology. Security techniques. Message authentication codes (MACs). Part 1. Mechanisms using a block cipher

CH/121/1

IST/33



08/30192545 DC

08/30192767 DC

BS EN ISO 23747 Anaesthetic and

BS EN 62301

respiratory equipment. Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans CH/121/5


ACE/6/-/3

08/30192553 DC

Plastics. Determination of Charpy impact properties. Part 1. Noninstrumented impact test BS EN ISO 179-1

liquid oxygen systems for medical use. Particular requirements CH/121/5


08/30192648 DC Primary batteries. Part 5. Safety of batteries with aqueous electrolyte BS EN 60086-5 AMD1

CPL/35



cables, installation. Protection sleeve in metaaramid fibres. Part 007. Self-wrapping mechanical and electrical protective sleeve, flexible post installation operating temperature from -55°C to 260°C. Product standard

capacitors for use in electronic equipment. Part 26. Sectional specification. Aluminium electrolytic capacitors with conductive polymer solid electrolyte EPL/40X


08/30192480 DC Sleep apnoea breathing therapy. Part 2. Masks and application BS EN ISO 17510-2

CH/121/5


08/30192501 DC Medical suction equipment. Part 2. Manually powered suction equipment BS EN ISO 10079-2

CH/121/5


CPL/59


08/30192771 DC Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. Part 2-2. Particular requirements for fan heaters CPL/59


Switches for household and similar fixed electrical installations. Collateral standard. Switches and related accessories for use in home and building electronic systems (HBES) BS EN 50428 AMD2

PEL/23

ACE/6



08/30193565 DC

08/30192301 DC BS EN 60384-26 Fixed

Household electrical appliances. Management of standby power

08/30192819 DC

PRI/21

08/30192293 DC

BS ISO/IEC 9797-1

BS EN 60704-2-2

BS EN ISO 18777 Transportable

08/30192288 DC

08/30192697 DC

Medical suction equipment. Part 3. Suction equipment powered from a vacuum or pressure source BS EN ISO 10079-3

Aerospace series. Electrical contacts used in elements of connection. Part 002. List and utilization of contacts BS EN 3155-002

cables, installation. Protection sleeves. Test methods. Part 307. Ageing

BS EN 61784-5 Industrial

08/30192660 DC BS EN 62541-7 OPC Unified Architecture

Specification. Part 7. Profiles AMT/7


08/30192664 DC OPC Unified Architecture Specification. Part 9. Alarms and Conditions £18.00 members, £36.00 non-members BS EN 62541-9

AMT/7


08/30192668 DC Unified Architecture Specification. Part 10. Programs

communication networks. Profiles. Part 5. Installation of fieldbuses AMT/7


DOCUMENTS NOT ISSUED AS DPCs Comments can be sent by email or by post to named contacts at:– BSI Head Office 389 Chiswick High Road London W4 4AL Tel: 020 8996 9000

BS EN 62541-10 OPC

EN 1463:—

AMT/7

Road marking materials. Retroreflecting road studs


EN 1463-1 Initial performance requirements

08/30192505 DC

08/30192674 DC

Sleep apnoea breathing therapy. Part 1. Sleep apnoea breathing therapy equipment


CH/121/5

ACE/6



BS EN ISO 17510-1


cables, installation. Protection sleeves. Test methods. Part 100. General


The above draft has been circulated for UAP vote. Copies are available on request from the contact point (below). Contact: Committee Service Centre Email: [email protected] B/509/2

41

Documents Not Issused as DPCs continued... EN 1755:2000/Amendment 1

prEN 696

Safety of industrial trucks. Operation in potentially explosive atmospheres. Use in flammable gas, vapour, mist and dust

Ductile iron pipes, fittings, accessories and their joints for gas pipelines. Requirements and test methods

The above draft has been circulated for UAP vote. Copies are available on request from the contact point (below). Contact: Committee Service Centre Email: [email protected]

This standard has been circulated under the CEN UAP procedure. A copy of the document may be obtained from the contact point (below) on request. Contact: Committee Service Centre Email: [email protected]

CEN EUROPEAN STANDARDS EUROPEAN RATIFIED TEXTS

MHE/7

PSE/10

EN 13155:— Cranes. Safety

EN 13155-1:2003/Amendment 2 Non-fixed load lifting attachments This amendment addresses the revised Machinery Directive 2006/42/EC by adding a new informative annex ZB. Annex ZA is modified to include the Official Journal citation and presumption of conformity to the relevant Essential Requirements. The references have been updated and there are also minor changes to 7.2.1 minimum marking to require additional details of the manufacturer and/or the authorised representative, and to clarify the machinery designation and year of manufacture. Contact: Mike Hodson Email: [email protected] MHE/3

EN 15056:2006/Amendment 1 Cranes. Requirements for container handling spreaders This amendment addresses the revised Machinery Directive 2006/42/EC by adding a new informative annex ZB. A new clause 5.5.3 covering electrical connection to the crane has also been added. The references have been updated and 7.1 Information for use has been modified in respect of the information on static test load to be given in the machine manual, not the technical file. Table B.1, which identifies suitable sets of standards, has also been updated. Contact: Mike Hodson Email: [email protected] MHE/3

prEN 1447 Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of long-term resistance to internal pressure This standard has been circulated under the CEN UAP procedure. A copy of the document may be obtained from the contact point (below) on request. Contact: Committee Service Centre Email: [email protected] PRI/88/2

The documents listed below have recently been issued by CEN but have not yet been published as BS ENs. BSI has an obligation to adopt all ENs and to withdraw any conflicting British Standards (BSs) or parts of BSs. The following will be implemented as BS ENs or as amendments to BS ENs shortly. Notification of their implementation will be given in the BS EN Publications section of the relevant edition of Update Standards.

EN 485:— Aluminium and aluminium alloys. Sheet, strip and plate

EN 485-2:2008 Mechanical properties NFE/35/5

EN 500:— prEN ISO 5182 Resistance welding. Materials for electrodes and ancillary equipment This standard has been circulated under the CEN UAP procedure to adopt ISO 5182:2008 as an identical European Standard. ISO 5182:2008 has already been adopted as identical BS ISO 5182:2008 in the UK. Contact: Committee Service Centre Email: [email protected] WEE/29

Mobile road construction machinery. Safety

EN 500-2:— Specific requirements for road-milling machines AMENDMENT 1:October 2008

to EN 500-2:2006 B/513/1

EN 500-3:— Specific requirements for soil-stabilising machines and recycling machines AMENDMENT 1:October 2008

to EN 500-3:2006 prEN ISO 17678 Milk and milk products. Determination of milk fat purity by gas chromatographic analysis of triglycerides (Reference method) This document has been issued as a second draft for parallel enquiry in CEN and ISO. Copies are available on request from the contact point (below) under document reference AW/5_08_0060. Contact: Committee Service Centre Email: [email protected]

B/513/1

EN 528:2008 Rail dependent storage and retrieval equipment. Safety requirements MHE/14

EN 539:— Clay roofing tiles for discontinuous laying. Determination of physical characteristics

AW/5

EN ISO 20361 Liquid pumps and pump units. Noise test code. Grades 2 and 3 of accuracy

EN 539-2:— Test for frost resistance

prEN ISO 24373

CORRIGENDUM 1:October 2008

Welding consumables. Solid wires and rods for fusion welding of copper and copper alloys. Classification

to EN 539-2:2006

EN 894:—

Please note that only editorial, as opposed to technical, changes can be proposed to the document. Contact: Manjit Matharu Email: [email protected]

This document which will not be issued as a Draft for Public Comment is identical to ISO 24373:2008 and has been circulated to CEN members for voting. Please sumbit any comments to the Programme Manager (below) by 31 December, 2008. Contact: Anne Hannan Email: [email protected]

MCE/6

WEE/39

PH/9

It has been proposed that the above standard be issued under the Unique Acceptance Procedure. BS EN ISO 20361 will supersede BS EN 12639:2000. Any comments on this proposal should be received by the Programme Manager (below) by 15 February, 2009.

42


B/542/3

Safety of machinery. Ergonomics requirements for the design of displays and control actuators

EN 894-1:1997+A1:2008 General principles for human interactions with displays and control actuators


EN 894-3:2000+A1:2008

EN 12385:—

EN 13411-7:—

Control actuators

Steel wire ropes. Safety

Symmetric wedge socket AMENDMENT 1:October 2008

PH/9

EN 12385-1:2002+A1:2008

to EN 13411-7:2006 MHE/2

EN 1005:—

General requirements

Safety of machinery. Human physical performance

MHE/2

EN 1005-1:2001+A1:2008

EN 13138:—

Precast concrete products. Floor plates for floor systems

Terms and definitions

Buoyant aids for swimming instruction

AMENDMENT 1:October 2008

EN 13747:—

PH/9/4

to EN 13747:2005 EN 13138-1:2008

EN 1170:— Test method for glass-fibre reinforced cement

Safety requirements and test methods for buoyant aids to be worn SW/136

EN 1170-8:2008 Cyclic weathering type test B/524

EN 1264:— Water based surface embedded heating and cooling systems

EN 13757:— Communication systems for meters and remote reading of meters

EN 13297:— Textile floor coverings. Classification of needled pile floor coverings CORRIGENDUM 1:October 2008

EN 13757-5:2008 Wireless relaying PEL/894

to EN 13297:2007 AGE/30

EN 1264-2:2008 Floor heating. Prove methods for the determination of the thermal output using calculation and test methods

B/524

EN 14267:— Irrigation techniques. Irrigation hydrants

EN 13411:—


Terminations for steel wire ropes. Safety

to EN 14267:2004

RHE/6

AGE/30

EN 13411-1:— EN 1264-5:2008

Thimbles for steel wire rope slings

Heating and cooling surfaces embedded in floors, ceilings and walls. Determination of the thermal output


RHE/6

EN 1434:— Heat meters

EN 1434-3:2008 Data exchange and interfaces PEL/894

to EN 13411-1:2002 MHE/2

EN 14459:— Control functions in electronic systems for gas burners and gas burning appliances. Methods for classification and assessment CORRIGENDUM 1:October 2008

to EN 14459:2007 EN 13411-2:—

GSE/22

Splicing of eyes for wire rope slings AMENDMENT 1:October 2008

to EN 13411-2:2001 MHE/2

EN 15181:2008 Measuring method of the energy consumption of gas fired ovens GSE/35

EN 1634:—

EN 13411-3:—

Fire resistance and smoke control tests for door, shutter and, openable window assemblies and elements of building hardware

Ferrules and ferrule-securing

EN 15258:2008


to EN 13411-3:2004

Precast concrete products. Retaining wall elements

MHE/2

B/524

Fire resistance tests for doors, shutters and openable windows

EN 13411-4:—

EN 15327:—

FSH/24

Metal and resin socketing

EN 1634-1:2008


EN 12002:2008

to EN 13411-4:2002

Adhesives for tiles. Determination of transverse deformation for cementitious adhesives and grouts

MHE/2

B/539

EN 13411-5:—

Railway applications. Passenger alarm subsystem

EN 15327-1:2008 General requirements and passenger interface for the passenger emergency brake system RAE/4

U-bolt wire rope grips

EN 12003:2008


Adhesives for tiles. Determination of shear adhesion strength of reaction resin adhesives

to EN 13411-5:2003 MHE/2

B/539

EN 12336:2005+A1:2008 Tunnelling machines. Shield machines, thrust boring machines, auger boring machines, lining erection equipment. Safety requirements B/513


EN 15355:2008 Railway applications. Braking. Distributor valves and distributor-isolating devices RAE/4

EN 13411-6:— Asymmetric wedge socket AMENDMENT 1:October 2008

EN 15427:2008

to EN 13411-6:2004

Railway applications. Wheel/rail friction management. Flange lubrication

MHE/2

RAE/3/-/6


43

CEN European Standards continued... EN 15564:2008

EN 50465:2008

Precast concrete products. Resin bound concrete. Requirements and test methods

Gas appliances. Fuel cell gas heating appliance. Fuel cell gas heating appliance of nominal heat input inferior or equal to 70 kW

B/524

GEL/105

EN 15613:2008 Knee and elbow protectors for indoor sports. Safety requirements and test methods PH/3

MHE/8

Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation AMENDMENT 1:October 2008

to EN 60335-2-27:2003 EN 55014:— Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatus

EN 15620:2008 Steel static storage systems. Adjustable pallet racking. Tolerances, deformations and clearances

EN 60335-2-27:— (IEC 60335-2-27:2002/A1:2004)

EN 55014-2:— (IEC CISPR 14-2:1997/A2:2008)

CPL/61/01

EN 60335-2-27:— (IEC 60335-2-27:2002/A2:2007) Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation AMENDMENT 2:October 2008

Immunity. Product family standard

to EN 60335-2-27:2003


CPL/61/01

to EN 55014-2:1997

CEN REPORTS CEN/TR 15775:2008 Child use and care articles. National translations of warnings and instructions for use in child use and care articles standards CW/39

GEL/210/11

EN 60079:— Explosive atmospheres

GEL/31/11

CEN/TS 99001:2008

EN 60137:2008 (IEC 60137:2008)

Business support. Support services provided to small enterprises. Terminology, quality and performance

PEL/36

Insulated bushings for alternating voltages above 1000 V

SVS/1/1

EN 60335:—

CENELEC PUBLICATIONS EUROPEAN RATIFIED TEXTS The documents listed below have recently been issued by CENELEC but have not yet been published as BS ENs. BSI has an obligation to adopt all ENs and to withdraw any conflicting British Standards (BSs) or parts of BSs. The following will be implemented as BS ENs or as amendments to BS ENs shortly. Notification of their implementation will be given in the BS EN Publications section of the relevant edition of Update Standards.

Household and similar electrical appliances. Safety

EN 60335-2-5:— (IEC 60335-2-5:2002/A2:2008) Particular requirements for dishwashers

to EN 60335-2-5:2003 CPL/61/14

EN 60335-2-8:— (IEC 60335-2-8:2002/A2:2008) Particular requirements for shavers, hair clippers and similar appliances AMENDMENT 2:October 2008

to EN 60335-2-8:2003

EN 50131:—

CPL/61/07

EN 60335-2-60:— (IEC 60335-2-60:2002/A2:2008) Particular requirements for whirlpool baths and whirlpool spas AMENDMENT 2:October 2008

to EN 60335-2-60:2003 CPL/61/07

EN 60335-2-61:— (IEC 60335-2-61:2002/A2:2008) Particular requirements for thermal-storage room heaters AMENDMENT 2:October 2008

to EN 60335-2-61:2003 CPL/61/07

EN 60335-2-75:— (IEC 60335-2-75:2002/A2:2008) Particular requirements for commercial dispensing appliances and vending machines AMENDMENT 2:October 2008

to EN 60335-2-75:2004 CPL/61/5

EN 60335-2-98:— (IEC 60335-2-98:2002/A2:2008) Particular requirements for humidifiers AMENDMENT 2:October 2008

EN 50106:2008

CPL/61

to EN 60335-2-43:2003


CPL/61/01

Safety of household and similar electrical appliances. Particular rules for routine tests referring to appliances under the scope of EN 60335-1

Particular requirements for clothes dryers and towel rails AMENDMENT 2:October 2008

EN 60079-14:2008 (IEC 60079-14:2007) Electrical installations design, selection and erection

CEN TECHNICAL SPECIFICATIONS

EN 60335-2-43:— (IEC 60335-2-43:2002/A2:2008)

EN 60335-2-14:— (IEC 60335-2-14:2006/A1:2008)

to EN 60335-2-98:2003 CPL/61/07

Particular requirements for kitchen machines AMENDMENT 1:October 2008

to EN 60335-2-14:2003

EN 60404:— Magnetic materials

CPL/61/01

Alarm systems. Intrusion systems

EN 60404-2:— (IEC 60404-2:1998/A1:2008)

EN 50131-5-3:—

EN 60335-2-15:— (IEC 60335-2-15:2002/A2:2008)

Requirements for interconnections equipment using radio frequency techniques

Particular requirements for appliances for heating liquids

Methods of measurement of magnetic properties of electrical steel sheet and strip by means of an Epstein frame



AMENDMENT 1:CORRIGENDUM 1:October 2008

to EN 50131-5-3:2005

to EN 60335-2-15:2005

to EN 60404-2:1998

GW/1/1

CPL/61/07

ISE/NFE/5

44



CENELEC Publications continued... EN 60512:—

EN 60851:—

Connectors for electronic equipment. Tests and measurements

Winding wires. Test methods

EN 60512-26-100:2008 (IEC 60512-26-100:2008) Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7. Tests 26a to 26g EPL/48

EN 60598:— Luminaires

EN 60598-1:2008 (IEC 60598-1:2008)

EN 60851-5:2008 (IEC 60851-5:2008)

EN 60669:— Switches for household and similar fixedelectrical installations

Electrical insulation systems. Thermal evaluation of modifications to an established wire-wound EIS GEL/112

Electrical properties GEL/55

EN 60966:— Radio frequency and coaxial cable assemblies

EN 62227:2008 (IEC 62227:2008) Multimedia home server systems. Digital rights permission code EPL/100

EN 60966-2-1:2008 (IEC 60966-2-1:2003) Sectional specification for flexible coaxial cable assemblies

EN 62288:2008 (IEC 62288:2008)

EPL/46/1

Maritime navigation and radiocommunication equipment and systems. Presentation of navigation-related information on shipborne navigational displays. General requirements, methods of testing and required test results

General requirements and tests CPL/34/4

EN 61858:2008 (IEC 61858:2008)

EN 60966-3:2008 (IEC 60966-3:2003) Sectional specification for semi-flexible coaxial cable assemblies

EPL/80

EPL/46/1

EN 62305:— EN 60669-1:— (IEC 60669-1:1998/A2:2006) General requirements

EN 61000:— Electromagnetic compatibility (EMC)


to EN 60669-1:1999 PEL/23

EN 60695:— Fire hazard testing

EN 60695-1-30:2008 (IEC 60695-1-30:2008)

Protection against lightning

EN 61000-3-3:2008 (IEC 61000-3-3:2008) Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection GEL/210/12

EN 62305-3:— (IEC 62305-3:2006) Physical damage to structures and life hazard CORRIGENDUM 1:September 2008

to EN 62305-3:2006 GEL/81

EN 62317:— Ferrite cores. Dimensions

Guidance for assessing the fire hazard of electrotechnical products. Preselection testing process. General guidelines

EN 61039:2008 (IEC 61039:2008)

GEL/89

Classification of insulating liquids

EN 62317-14:2008 (IEC 62317-14:2008)

GEL/10

EFD-cores for use in power supply applications

EN 60794:— Optical fibre cables

EN 60794-2-41:2008 (IEC 60794-2-41:2008) Indoor cables. Product specification for simplex and duplex buffered A4 fibres GEL/86/1

EN 60810:— (IEC 60810:2003/A1:2008) Lamps for road vehicles. Performance requirements AMENDMENT 1:October 2008

to EN 60810:2003 CPL/34/1

EN 60825:— Safety of laser products

EN 60825-4:— (IEC 60825-4:2006/A1:2008) Laser guards

EPL/51

EN 61291:— Optical amplifiers

EN 61291-4:2008 (IEC 61291-4:2008) Multichannel applications. Performance specification template GEL/86/3

Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV

CENELEC HD 629.1 S2:—

Interfaces. Command set

Cables with extruded insulation

GEL/86/3

AMENDMENT 1:September 2008

to CENELEC HD 629.1 S2:2006 EN 61857:— Electrical insulation systems. Procedures for thermal evaluation

EN 61857-22:2008 (IEC 61857-22:2008)

to EN 60825-4:2006 EPL/76

GEL/112

46

CENELEC HD 629:—

EN 61291-6-1:2008 (IEC 61291-6-1:2008)

Specific requirements for encapsulated-coil model. Wire-wound electrical insulation system (EIS)


HARMONIZATION DOCUMENTS


£38.00 members, £40.00 non-members GEL/20/11

CENELEC HD 629.2 S2:— Cables with impregnated paper insulation AMENDMENT 1:September 2008

to CENELEC HD 629.2 S2:2006 £38.00 members, £40.00 non-members GEL/20/11


IEC PUBLICATIONS It is BSI policy to supply the UK version of all adopted standards, which are published as British standards, unless otherwise requested. The following IEC publications are available from BSI Customer Services (see ’How to order’ on page 2)

IEC 60034:—

IEC 61000:—

IEC CISPR 15:—

Electromagnetic compatibility (EMC)

Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

IEC 61000-4:—


Testing and measurement techniques

to IEC CISPR 15:2005 £14.40 members, £15.00 non-members

IEC 61000-4-6:2008

GEL/210/11

(Edition 3) Immunity to conducted disturbances, induced by radio-frequency fields £137.28 members, £143.00 non-members

IEC CISPR 16:— Specification for radio disturbance and immunity measuring apparatus and methods

GEL/210/12

Rotating electrical machines

IEC 61000-4-30:2008 IEC 60034-30:2008

(Edition 2)

Efficiency classes of single-speed three-phase cage induction motors £59.52 members, £62.00 non-members

Power quality measurement methods £98.00 members, £163.00 non-members GEL/210/12

PEL/2

IEC CISPR 16-2-1:2008 (Edition 2) Methods of measurement of disturbances and immunity. Conducted disturbance measurements £156.48 members, £163.00 non-members GEL/210/12

IEC 61606:— IEC/TS 60815:— Selection and dimensioning of high-voltage insulators intended for use in polluted conditions

IEC/TS 60815-1:2008 Definitions, information and general principles £137.28 members, £143.00 non-members

Audio and audiovisual equipment. Digital audio parts. Basic measurement methods of audio characteristics

ISO PUBLICATIONS

IEC 61606-3:2008

It is BSI policy to supply the UK version of all adopted standards, which are published as British standards, unless otherwise requested.

Professional use £120.00 members, £125.00 non-members EPL/100

PEL/36

The following ISO publications are available from BSI Customer Services (see ’How to order’ on page 2)

IEC 62059:— IEC/TS 60815-2:2008 Ceramic and glass insulators for A.C. systems £72.00 members, £75.00 non-members PEL/36

IEC/TS 60815-3:2008 Polymer insulators for A.C. systems £65.28 members, £68.00 non-members PEL/36

Electricity metering equipment (A.C.). Dependability

(Edition 3)

IEC 62059-31:2008 Accelerated reliability testing. Elevated temperature and humidity £168.00 members, £175.00 non-members

Calculation of cyclic and emergency current rating of cables

Pallets for materials handling. Vocabulary £112.32 members, £117.00 non-members PKW/0/-/11

Will be implemented as an identical British Standard

PEL/13

IEC/TS 62239:2008 (Edition 2)

IEC 60853:—

ISO 445:2008

Process management for avionics. Preparation of an electronic components management plan £78.72 members, £82.00 non-members

ISO 589:2008 (Edition 4) Hard coal. Determination of total moisture £45.12 members, £47.00 non-members PTI/16

GEL/107

Will not be implemented as a British Standard

IEC 60853-1:—

IEC 80601:—

ISO 1750:—

Cyclic rating factor for cables up to and including 18/30 (36) kV

Medical electrical equipment

Pesticides and other agrochemicals. Common names


to IEC 60853-1:1985 £14.40 members, £15.00 non-members GEL/20/16

IEC 80601-2-58:2008 Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery £86.40 members, £90.00 non-members

AMENDMENT 5:November 2008

to ISO 1750:1981 £137.28 members, £143.00 non-members AW/81


CH/62/4

IEC 60853-2:— Cyclic rating of cables greater than 18/30 (36) kV and emergency ratings for cables of all voltages

IEC 80601-2-59:2008

£35.52 members, £37.00 non-members

Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening £96.00 members, £100.00 non-members

GEL/20/16

CH/62/4


to IEC 60853-2:1989



ISO 2320:2008 (Edition 4) Prevailing torque type steel nuts. Mechanical and performance properties £65.28 members, £68.00 non-members FME/9/1


47

ISO Publications continued... ISO 2470:—

ISO 4666:—

ISO 7573:2008

Paper, board and pulps Measurement of diffuse blue reflectance factor

Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing

(Edition 2)

ISO 2470-2:2008 Outdoor daylight conditions (D65 brightness) £38.40 members, £40.00 non-members

ISO 4666-2:2008

PAI/11

Rotary flexometer £45.12 members, £47.00 non-members


(Edition 2)

PRI/22

ISO 2575:— Road vehicles. Symbols for controls, indicators and tell-tales AMENDMENT 3:October 2008

Technical product documentation. Parts lists £38.40 members, £40.00 non-members TDW/4


ISO 8362:— Injection containers and accessories


ISO 4706:2008

ISO 8362-2:2008


Gas cylinders. Refillable welded steel cylinders. Test pressure 60 bar and below £91.20 members, £95.00 non-members

AUE/12

PVE/3/3

Closures for injection vials £33.60 members, £35.00 non-members



CH/212

to ISO 2575:2004

(Edition 2)


ISO 2898:— Plastics. Plasticized poly (vinyl chloride)(PVC-P) moulding and extrusion materials

ISO 2898-2:2008 (Edition 4)

ISO 5492:2008 (Edition 2) Sensory analysis. Vocabulary £137.28 members, £143.00 non-members AW/12


Preparation of test specimens and determination of properties £33.60 members, £35.00 non-members

ISO 6292:2008

PRI/82

(Edition 2)


Powered industrial trucks and tractors. Brake performance and component strength £49.92 members, £52.00 non-members

ISO 3767:— Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Symbols for operator controls and other displays

ISO 3767-2:2008 (Edition 3) Symbols for agricultural tractors and machinery £70.08 members, £73.00 non-members AGE/6


ISO 4254:— Agricultural machinery. Safety

ISO 8362-5:2008 (Edition 2) Freeze drying closures for injection vials £45.12 members, £47.00 non-members CH/212

MHE/7


ISO 7176:— Wheelchairs

ISO 7176-10:2008 (Edition 2) Determination of obstacle-climbing ability of electrically powered wheelchairs £33.60 members, £35.00 non-members CH/173/1


ISO 8406:2008 (Edition 3) Tools for moulding. Mould bases. Round locating elements and spacers £28.80 members, £30.00 non-members MTE/12


ISO/IEC 9075:2008 (CD-ROM) Information technology. Database languages. SQL £242.88 members, £253.00 non-members IST/40


This CD contains Parts 1-4, 9-11, 13 and 14 of ISO/IEC 9075.

(Edition 2)

ISO 7240:—


Combine harvesters, forage harvesters and cotton harvesters £100.80 members, £105.00 non-members

Fire detection and alarm systems

ISO 4254-7:2008

AGE/32


ISO 4254-9:2008 (Edition 2) Seed drills £62.40 members, £65.00 non-members AGE/32


ISO 7240-28:2008 Fire protection control equipment £78.72 members, £82.00 non-members FSH/12/4


ISO 9697:2008 (Edition 2) Water quality. Measurement of gross beta activity in non-saline water. Thick source method £49.92 members, £52.00 non-members EH/3

ISO/IEC 7501:—


Identification cards. Machine readable travel documents

ISO 9895:2008

ISO 4373:2008

ISO/IEC 7501-1:2008 (CD-ROM)

(Edition 3)

(Edition 5)

Hydrometry. Water level measuring devices £65.28 members, £68.00 non-members

Machine readable passport £25.92 members, £27.00 non-members

Paper and board. Compressive strength. Shortspan test £38.40 members, £40.00 non-members

CPI/113/5

IST/17

PAI/11




48


(Edition 2)


ISO Publications continued... ISO 10303:—

ISO 11612:2008

ISO/TR 11955:2008

Industrial automation systems and integration. Product data representation and exchange

(Edition 2)

Hybrid-electric road vehicles. Guidelines for charge balance measurement £45.12 members, £47.00 non-members

ISO 10303-59:2008 Integrated generic resource. Quality of product shape data £194.88 members, £203.00 non-members AMT/4

Will not be implemented as a British Standard. Is approved as suitable for use in the UK

Protective clothing. Clothing to protect against heat and flame £73.92 members, £77.00 non-members

PEL/69


PH/3/2


ISO 11961:2008 (Edition 2)

ISO/IEC 11695:— Identification cards. Optical memory cards. Holographic recording method

Petroleum and natural gas industries. Steel drill pipe £137.28 members, £143.00 non-members PSE/17/-/5

ISO/TS 10303:— Industrial automation systems and integration. Product data representation and exchange

ISO/TS 10303-1052:2007 (CD-ROM) (Edition 2) Application module. Default tolerance £83.52 members, £87.00 non-members AMT/4


ISO 10407:— Petroleum and natural gas industries. Rotary drilling equipment

ISO/IEC 11695-1:2008 Physical characteristics £21.12 members, £22.00 non-members IST/17

Inspection and classification of used drill stem elements £175.68 members, £183.00 non-members

ISO/IEC 10646:— (CD-ROM) Information technology. Universal MultipleOctet Coded Character Set (UCS) AMENDMENT 4:July 2008

to ISO/IEC 10646:2003

ISO/IEC 11695-2:2008 Dimensions and location of accessible optical area £14.40 members, £15.00 non-members Will be implemented as an identical British Standard

Optical properties and characteristics £14.40 members, £15.00 non-members IST/17


ISO/IEC 11801:— Information technology. Generic cabling for customer premises AMENDMENT 1:CORRIGENDUM 1:October 2008

to ISO/IEC 11801:2002 TCT/7


IST/5

ISO 10907:— Tools for moulding. Locating rings

ISO 10907-1:2008 (Edition 2)

Measurement and application of forming-limit. Diagrams in the press shop £57.60 members, £60.00 non-members ISE/NFE/4/2


IST/17

£112.32 members, £117.00 non-members Will not be implemented as a British Standard

Metallic materials. Sheet and strip. Determination of forming-limit curves

ISO 12004-1:2008

PSE/17/-/4


ISO 12004:—


ISO/IEC 11695-3:2008 ISO 10407-2:2008


ISO 12004-2:2008 Determination of forming-limit curves in laboratory £86.40 members, £90.00 non-members ISE/NFE/4/2


ISO 13041:— Test conditions for numerically controlled turning machines and turning centres

ISO 13041-2:2008 Geometric tests for machines with a vertical workholding spindle £91.20 members, £95.00 non-members MTE/1


ISO 11900:—

ISO/TS 13434:2008

Tools for pressing. Ball-lock punch retainers

Geosynthetics. Guidelines for the assessment of durability £94.08 members, £98.00 non-members

ISO 11900-2:2008

B/553

(Edition 2)


Types C and D, reduced for light duty £33.60 members, £35.00 non-members

ISO 13500:2008

MTE/12

(Edition 3)

Locating rings for mounting without thermal insulating sheets in small or medium moulds (types A and B) £38.40 members, £40.00 non-members


Petroleum and natural gas industries. Drilling fluid materials. Specifications and tests £129.60 members, £135.00 non-members

ISO 11903:2008

MTE/12

PSE/17/-/3

(Edition 2)



Tools for pressing. Guide pillar mountings £28.80 members, £30.00 non-members

ISO 10993:—

MTE/12

Biological evaluation of medical devices


ISO 10993-7:2008 (Edition 2)

ISO/TR 11954:2008

Ethylene oxide sterilization residuals £129.60 members, £135.00 non-members

Fuel cell road vehicles. Maximum speed measurement £38.40 members, £40.00 non-members

CH/194

PEL/69



50


e-mail your order [email protected]


ISO Publications continued... ISO 13680:2008

ISO/IEC 14496-4:— (CD-ROM)

ISO 16000:—

(Edition 2)

Conformance testing

Indoor air

Petroleum and natural gas industries. Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock. Technical delivery conditions £129.60 members, £135.00 non-members


to ISO/IEC 14496-4:2004 £11.52 members, £12.00 non-members

ISO 16000-13:2008

ISO/IEC 14496-9:2008 (CD-ROM)

Determination of total (gas and particle-phase) polychlorinated dioxin-like biphenyls (PCBs) and polychlorinated dibenzo-p-dioxidibenzofurans (PCDDs/PCDFs). Collection on sorbent-backed filters £83.52 members, £87.00 non-members

(Edition 2)

EH/2/3

Reference hardware description £223.68 members, £233.00 non-members


(Edition 2) Fire safety. Vocabulary £105.60 members, £110.00 non-members

IST/37

ISO/IEC 16022:—

PSE/17/-/5

IST/37



ISO 13943:2008

FSH/9



ISO/IEC 14496-10:2008 (CD-ROM) ISO/IEC 14102:2008

(Edition 4)

(Edition 2)

Advanced video coding £194.88 members, £203.00 non-members

Information technology. Guideline for the evaluation and selection of CASE tools £94.08 members, £98.00 non-members

ISO 14172:2008 (Edition 2) Welding consumables. Covered electrodes for manual metal arc welding of nickel and nickel alloys. Classification £62.40 members, £65.00 non-members WEE/39



to ISO/IEC 16022:2006 IST/34


IST/37


ISO 16634:—

ISO/IEC 14496-12:2008 (Edition 3)

Food products. Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content

ISO base media file format £137.28 members, £143.00 non-members

ISO 16634-1:2008

IST/15


Information technology. Automatic identification and data capture techniques. Data matrix bar code symbology specification

IST/37


Oilseeds and animal feeding stuffs £83.52 members, £87.00 non-members AW/4


ISO 15783:— Seal-less rotodynamic pumps. Class II. Specification AMENDMENT 1:November 2008

ISO 18436:— Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel

ISO 14310:2008

to ISO 15783:2002

(Edition 2)


Petroleum and natural gas industries. Downhole equipment. Packers and bridge plugs £78.72 members, £82.00 non-members

MCE/6

ISO 18436-4:2008


Field lubricant analysis £57.60 members, £60.00 non-members

ISO 15784:—

GME/21/7

Intelligent transport systems (ITS). Data exchange involving roadside modules communication


PSE/17/-/4


ISO/IEC 14496:— Information technology. Coding of audio-visual objects

ISO 15784-1:2008

ISO/IEC 14496-4:— (CD-ROM)

General principles and documentation framework of application profiles £45.12 members, £47.00 non-members

Conformance testing AMENDMENT 20:August 2008

IST/37


to ISO/IEC 14496-4:2004 £11.52 members, £12.00 non-members IST/37


52


ISO 18436-7:2008

ISO 15784-3:2008

Thermography £62.40 members, £65.00 non-members

Application profile-data exchange (AP-DATEX) £57.60 members, £60.00 non-members

GME/21/7


EPL/278



GME/21/7


ISO/IEC 14496-4:— (CD-ROM) Conformance testing

Acoustic emission £49.92 members, £52.00 non-members

EPL/278

to ISO/IEC 14496-4:2004 £11.52 members, £12.00 non-members

ISO 18436-6:2008

ISO 18921:2008 (Edition 2)

ISO/TR 15847:2008 Graphic technology. Graphical symbols for printing press systems and finishing systems, including related auxiliary equipment £120.00 members, £125.00 non-members

Imaging materials. Compact discs (CD-ROM). Method for estimating the life expectancy based on the effects of temperature and relative humidity £65.28 members, £68.00 non-members

PAI/43

CPW/42





ISO 18925:2008

ISO 21212:2008

ISO 23868:2008

(Edition 2)

Intelligent transport systems. Communications access for land mobiles (CALM). 2G Cellular systems £38.40 members, £40.00 non-members

Document management. Monitoring and verification of information stored on 130 mm optical media £38.40 members, £40.00 non-members

EPL/278

IDT/1/1



Imaging materials. Optical disc media. Storage practices £49.92 members, £52.00 non-members CPW/42


ISO 18927:2008 (Edition 2) Imaging materials. Recordable compact disc systems. Method for estimating the life expectancy based on the effects of temperature and relative humidity £78.72 members, £82.00 non-members

ISO 21213:2008 Intelligent transport systems. Communications access for land mobiles (CALM). 3G Cellular systems £38.40 members, £40.00 non-members EPL/278

Information technology. Computer graphics, image processing and environmental data representation. Extensible 3D (X3D) encodings

TS/1


ISO 24394:2008 ISO/IEC 21827:2008 (Edition 2)

ISO/IEC 19776:—

Guidelines for using UML notation in terminology work £65.28 members, £68.00 non-members


CPW/42


ISO/TR 24156:2008

Information technology. Security techniques. Systems Security Engineering. Capability Maturity Model® (SSE-CMM®) £146.88 members, £153.00 non-members

Welding for aerospace applications. Qualification test for welders and welding operators. Fusion welding of metallic components £83.52 members, £87.00 non-members WEE/-/1


IST/33

Will be implemented as a British Standard

ISO 24538:2008

ISO 22702:— (CD-ROM)

Plastics. Homopolymer and copolymer resins of vinyl chloride. Determination of residual vinyl chloride monomer by gas-chromatographic analysis of dry powder £45.12 members, £47.00 non-members

ISO/IEC 19776-2:2008 (Edition 2) Classic VRML encoding £28.80 members, £30.00 non-members IST/31


Utility lighters. General consumer-safety requirements AMENDMENT 1:September 2008

to ISO 22702:2003

PRI/21



ISO 20283:—

CW/32

ISO/IEC 24727:—


Identification cards. Integrated circuit card programming interfaces

Mechanical vibration. Measurement of vibration on ships

ISO 22915:— Industrial trucks. Verification of stability

ISO/IEC 24727-4:2008

ISO 22915-1:2008

IST/17

ISO 20283-2:2008 Measurement of structural vibration £57.60 members, £60.00 non-members GME/21/5


General £38.40 members, £40.00 non-members

Application programming interface (API) administration £129.60 members, £135.00 non-members Will be implemented as an identical British Standard

MHE/7


ISO 20712:— Water safety signs and beach safety flags

ISO/IEC 23000:— ISO 20712-1:2008 (CD-ROM) Specifications for water safety signs used in workplaces and public areas £105.60 members, £110.00 non-members PH/8/1


Information technology. Multimedia application format (MPEG-A)

ISO/IEC 23000-7:2008 (CD-ROM) Open access application format £91.20 members, £95.00 non-members IST/37

ISO 20860:—


ISO/IEC 23000-9:2008 (CD-ROM)

Dimensions and electrical requirements £49.92 members, £52.00 non-members AUE/9



Information technology. Keyboard interaction model. Machine-readable keyboard description £146.88 members, £153.00 non-members ICT/-/1


ISO 26424:2008 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of the abrasion resistance of coatings by a micro-scale abrasion test £57.60 members, £60.00 non-members RPI/13


Road vehicles. 50 ohms impedance radio frequency connection system interface

ISO 20860-1:2008

ISO/IEC 24757:2008

Digital Multimedia Broadcasting application format £94.08 members, £98.00 non-members IST/37



ISO 28702:2008 Rubber and plastics hoses and tubing. Textilereinforced types. Sub-ambient temperature crush test £28.80 members, £30.00 non-members PRI/66


53

BS Code Guide

Recommend Documents