SGT-700 Industrial Gas Turbine Mechanical Mechanical Drive: (ISO) 32.04 MW (42,966bhp)
The Siemens SGT-700 industrial gas turbine is a high-performance gas turbine with excellent environmental compatibility. compatibility. It combines the reliability and robustness of an industrial design with the high efficiency and low emission levels of the latest turbine technology. technology.
The SGT-700 is an industrial gas turbine or mechanical drive applications. It is designed or heavy-duty operation under tough conditions, both onshore and oshore, loating or ixed, in hot or cold climates.
transients, variations in uel composition and ambient conditions. It also oers stability and DLE perormance or uels with high inert gas content and heavy hydrocarbons.
The SGT-700 is derived rom the well proven SGT-600. Together Together these turbines have more than six million operating hours and ield experience rom dierent operating conditions incorporated in the design.
The compact modularized design, small ootprint and low weight are o particular beneit in oshore applications. The standard electrical equipment design has been ully adapted or Ex-proo installation in hazardous areas and to meet oshore codes and standards.
The DLE (Dry Low Emissions) combustion combustion system is robust and simple with very high availability and no need or requent tuning. The DLE system is stable over the whole operating range including load
A single-lit module or loating platorms such as FPSO (Floating Production, Storage and Oloading) and semisubmersibles is available or both the SGT-600 and the SGT-700.
Industrial Gas Turbines
Answers An swers for energy. energy.
SGT-700 Industrial Gas Turbine
Compressor driven by SGT-700.
Technical specifications
Gas turbine
Overview
Power Trubine
• Mechanicaldrive:32.04 MW (42,966 bhp)
• 2-stageturbine,uncooled • Interlockingshrouds • Abradableseals
Robust and stable DLE perormance Robust design – long-lie components Low emissions – DLE ≤15 ppm NOx
Fuel System
Unique dual-uel DLE capability Fuel eiciency 37.4 % Wide range o uel capability
• Shaftefciency:37.4 % • Heatrate:9,629 kJ/ kWh (6,806 Btu/hph) • Turbinespeed:6,500rpm(50–105%) • Compressorpressureratio:18.6:1 • Exhaustgasow:94 kg/s(207 lb/s) • Exhausttemperature:528° C(983°F) •NOx emissions (with DLE corrected to 15 % O2 dry) - Gaseous uel: ≤15 ppmV Axial Compressor • 11-stageaxial-owcompressor - 2 stages variable guide vanes • Electron-beamweldedrotor • Cr-steelbladesandvanes • Abradableseals Combustion • Weldedannularsheetmetaldesign • 18dual-fuelDr yLowEmissions burners • RobustandstableDLEperformance Compressor Turbine • 2-stageturbine,air-cooled
• Naturalgas–Liquidfuel–Dualfuel • Onloadfuel-changeovercapability • Gas-supplypressurerequirement: 27.0 bar(a) ±0.5bar (395±7psi(a))
Key features
Long-term eiciency – low deterioration Excellent operational availability and reliability
Bearings • Tiltingpadradialandthrustbearings • Vibration-andtemperature monitoring Lubrication • Commonlubricatingoilsystem integrated in skid using mineral oil • 3x50 %AC-drivenlubeoilpumps with DC backup Starting
Maintenance On-site maintenance or 24-hour exchange o gas generator Flexible standardized concepts or maintenance planning Overhaul interval o 40,000 hours Condition-based maintenance The 18 burners are easily removable without opening the casing Can be balanced in-ield
• ElectricVSDstart-motor
Sta training in operation and maintenance
Control System
24/7 Siemens support Remote diagnostics
• SiemensSimaticS7controlsystem • DistributedInputs/Outputs
The first SGT-700 mechanical drive offshore unit is installed in the Arabian Gulf.
The first two SGT-700 mechanical drive onshore units were delivered to an NGL (natural gas liquids) plant in Egypt.
Package
Customer Support
Key features Compact layout Same ootprint and commonality with the SGT-600 Flexible installations based on standardized package solutions Majorcomponentsdeliveredonacommon base rame Fast and easy installation Skid-mounted with single-lit capacity Pre-commissioned at the Siemens workshop to reduce time at site
Global support network o Authorized Service Centers Emergency service – 24/7 specialist helpdesk Full ield service Full diagnostic support, remote monitoring OEMmodernizationsandupgrades In-house or on-site training programs Range o maintenance and service contracts available
Simple on-site works due to lexible package design State-o-the-art control system ulills all requirements or control and saety Can easily communicate with other control systems
m 9 . 1 1 : e g a k c a p f o p o t o t t h g i e H
SGT-700 standard driver package 1 Combustion air inlet 2 Enclosure air inlet 3 Lube oil system
W i d t h : 4 .1 m
4 Combustion exhaust 5 Enclosure air outlet 6 Core engine
ka ine pac Gas turb
m th: 11.6 ge leng
SGT-700 Performance
38
38
S t a n d a r H i d g h P T a m N o z b i e n z l e t P T N o z z l e
-30ºC ) º C e ( r t u r a p e e m t t l e i n n e g i E n
36
34
-15ºC 36 0º C 9,470
15ºC
32
9,730 W M , r e w o p t f a h s l a n i m o N
30
30ºC 28 10,000
S p
e
26
c i f c h
e a
24
t i n p u t
( k J/ k W h)
10,290 45ºC
10,590
34
W M , d e e p s T P l a n i m o n t a r e w o p t f a h s l a n i m o N
32
30
28
26
24
10,910 22
22 11,250
20
20
11,610 12,000
18
18 3000
4000
5000
6000
7000
-40
-20
0
20
40
60
Engine inlet temperature, º C
Power turbine rotor speed, rpm
Nominal performance Power and specific heat input and speed
Power output at turbine coupling and engine inlet temperature
SGT-700 Mechanical drive performance Conditions/assumptions: Direct drive – no output gearbox. Altitude: Inlet ducting loss: Exhaust ducting loss:
Sea level 0 kPa 0 kPa
Natural gas uel. Ambient pressure: Relative humidity: Power turbine design speed:
101.3 kPa 60 % 6,500 rpm
Specifc heat input is drawn or base load but is approximately correct or part load at corresponding speed/temperature.
Published by and copyright © 2009: Siemens AG Energy Sector Freyeslebenstrasse 1 91058 Erlangen, Germany Siemens AG Energy Sector Oil & Gas Division Wolgang-Reuter-Platz 47053 Duisburg, Germany
Siemens Energy, Inc. 10730 Telge Road Houston, Texas 77095, USA Siemens Industrial Turbomachinery AB Slottsvaegen SE-61283 Finspong, Sweden
www.siemens.com / energy
For more inormation, please contact our Customer Support Center. Tel: +49 180 524 70 00 Fax: +49 180 524 24 71 (Charges depending on provider) E-mail:
[email protected] Oil & Gas Division Order No. E500 01-W430-A105-x-4A00 Printed in Germany Dispo 34806, c4bs 7447, P WS 12092.5
Printed on elementary chlorine-ree bleached paper. All rights reserved. Trademarks mentioned in this document are the property o Siemens AG, its ailiates, or their respective owners. Subject to change without prior notice. The inormation in this document contains general descriptions o the technical options available, which may not apply in all cases. The required technical options should thereore be speciied in the contract.