Vedic Multiplier Paper . NO codes :(Full description
digital signal processing and fpgaDescripción completa
Multiplier in Economics
In this document the VHDL code is given to print our name on the LCD screen of FPGA.
makro ekonomiDeskripsi lengkap
Descripción completa
In this document the VHDL code is given to print our name on the LCD screen of FPGA.Description complète
Capacitance Multiplier
vedic seminar file
Full description
Full description
Full Adder Vhdl Code Using Structural Modeling
Descripción: vlsi design processor
Descripción: contains VHDL code, with testbench and waveforms for some experiments.
Half Adder Vhdl Code Using Dataflow Modeling
Descripción completa
VHDL Code for 4-Bit Shift RegisterDescripción completa
VHDL code for 4-bit ALU
8:1 Multiplexer The multiplexer is a combinational circuit which accepts several data inputs and allows only one of them at a time to get through to the output.Descripción completa
Descripción completa
VHDL Code for Booth Multiplier library ieee; use ieee.std_logic_1164.all ; use ieee.std_logic_unsigned.all;
library ieee; use ieee.std_logic_1164.all ; entity testbooth is end entity;
entity boothmult is port ( mpcd, mplr : in std_logic_vector(7 downto 0); result : out std_logic_vector(15 downto 0) ; start : in std_logic ); end entity ; architecture booth_arch of boothmult is begin process(start) variable br,nbr : std_logic_vector(7 downto 0); variable acqr : std_logic_vector(15 downto 0); variable qn1 : std_logic ; begin if(start'event and start = '1') then acqr(15 downto 8):= (others=>'0'); acqr(7 downto 0) := mpcd; br:= mplr ; nbr := (not mplr) + '1' ; qn1 := '0' ; else loop1 : for i in 7 downto 0 loop if( acqr(0) = '0' and qn1 = '0') then qn1 := acqr(0); acqr(14 downto 0) := acqr(15 downto 1) ; elsif ( acqr(0) = '0' and qn1 = '1') then acqr(15 downto 8) := acqr(15 downto 8) + br; qn1 := acqr(0); acqr(14 downto 0) := acqr(15 downto 1) ; elsif ( acqr(0) = '1' and qn1 = '0') then acqr(15 downto 8) := acqr(15 downto 8) + nbr; qn1 := acqr(0); acqr(14 downto 0) := acqr(15 downto 1) ; elsif ( acqr(0) = '1' and qn1 = '1') then qn1 := acqr(0); acqr(14 downto 0) := acqr(15 downto 1) ; end if ; end loop loop1; result <= acqr ; end if ; end process ; end booth_arch;
architecture test_arch of testbooth is component boothmult is port ( mpcd, mplr : in std_logic_vector(7 downto 0); result : out std_logic_vector(15 downto 0) ; start : in std_logic ); end component ; signal tmpcd, tmplr : std_logic_vector(7 downto 0); signal tresult : std_logic_vector(15 downto 0); signal tstart : std_logic := '0'; begin inst: boothmult port map (tmpcd, tmplr, tresult, tstart ); process begin tmpcd <= "11111110" ; tmplr <= "00000010" ; tstart <= '1'; wait for 1 ns; tstart <= '0'; wait for 10 ns ; tmpcd <= "00000101" ; tmplr <= "00000010" ; tstart <= '1'; wait for 1 ns; tstart <= '0'; wait for 10 ns ; end process; end test_arch ;