Bando

ITEM

FEATURES

1. Multiply Conveyor Belt

Application : General : General use Range of productions : Belt width : 400 ~ 1675mm Belt strength : 100 ~ 2400 Kgf/cm No of ply : 2 ~ 8 plies Overall thickness : 30mm max.

2. Sunlon Conveyor Belt

Sunlon is brand name for these belts constructed of fewer plies Application : This series belts provides extensive specifications for various service conditions from conveyance of bulk materials like gravel, crushed stone, fertilizer and minerals ores to larger lump materials. Features : 1. 2. 3. 4. 5. 6.

Less ply structure : can be used with a small-diameter small-diameter pulley High bending-resistance and e xcellent troughability. Can be easily spliced by cold vulcanizing. High impact-resistance impact-resistance that gives less damage to the core fabric. Its cover rubber is highly resistant to chip cut and abrasion, thus ensuring the belt's longevity. It can handle crushed stone with a bulk size of 500mm.

3. Bucket Elevator Belt

Applications : Buckets can be attached to this vertically installed belt, which is suitable for conveying bulk materials such as grains and cement materials and products. Range of production : Belt width: 300 ~ 1675mm 1675mm Tensile strength : 400 ~ 2400 Kgf/cm

4. Related Products : a. Cold Splicing Material (SUNPAT-S).

Features of SUNPAT-S : 1.

2.

3.

4.

b. Hot Splicing Material

Shorter Curing Time The Belt can be operation only two hours after work is completed. Wider Applicable Range SUNPAT-S is also applicable to SBR type heat resistant and oil resistant belt. High Peeling Off Resistance Eventhough cushion rubber is not used it is highly resistant to peeling off caused by bending. Operational Operational efficiency is Increased With its quick drying performance yet highly adhesiveness it eliminates problem such as mispositioning. Finishing is also simple.

Consist of : 1. Tie Gum * 2. Cover rubber * 3. Cement rubber * 4. Cleaning solvent * ( Name according to the grade )

SELECTION OF CARCASS BY SERVICE CONDITION CARCASS

STRENGTH

FEATURES

EP Polyester Fabric

EP-100 EP-150 EP-200 EP-250 EP-300

( ( ( ( (

100 150 200 250 300

Kgf/cm.ply Kgf/cm.ply Kgf/cm.ply Kgf/cm.ply Kgf/cm.ply

) ) ) ) )

Short take-up travel Heavy duty Long span Impact resistance

NN Nylon Fabric

NN-100 NN-150 NN-200 NN-250 NN-300

( ( ( ( (

100 150 200 250 300

Kgf/cm.ply Kgf/cm.ply Kgf/cm.ply Kgf/cm.ply Kgf/cm.ply

) ) ) ) )

High impact resistance High bending resistance Wide selection available

CARCASS GENERAL USE 1. RMA - 1 DIN Grade M BS Grade M AS Grade M 2. RMA - 2 ( JIS-S Equivalent ) DIN Grade N BS Grade N AS Grade N 3. JIS - G 4. JIS - L

STRENGTH The rubber cover specified in standard such as Deutche Normen ( DIN ), British standard ( BS ), etc. are available. Used as cover rubber for general and high tension conveyor belt. Superior in abrasion resistance, cut and gouge resistance. Suitable for conveying large size lump, sharp and rugged materials. Used as cover rubber for general conveyor belt. Superior in abrasion resistance. Used for cover rubber general purpose Used as cover rubber for light duty

HOT SERVICE 1. HR - 510 ( Heat Resistant No. 510 ) 2. HR - 710 ( Heat Resistant No. 710 )

SBR type standard Heat Resistant belt with excellent abrasion resistance. Max. temperature of material handled is about 150 oC. Suitable for conveying the following materials : hot sintered ore, hot pellet, hot clinker, hot chemical fertilizer, etc. Special compound with ethylene propylene rubber, features excellent heat resistance and abrasion resistance. Max. temperature of materials handled is about 400 oC and max. temperature of belt surface is 180 oC. Suitable for powdery materials such as cement products, due to its non- cracking properties. Typical applications : hot clinker, hot powder, hot sintered ore, etc.

OIL SERVICE 1. OR - 210 ( Oil Resistant No. 210 ) 2. OR - 220 ( Oil Resistant No. 220 )

Excellent oil resistance. Generally used to convey materials soaked with or containing oil with the e xception of aromatic solvent, halogenated hydro carbon, ketone or ester. Medium oil resistance with cold resistance. Typical applications : wood chips, refrigerated fish, etc.

FLAME SERVICE FR - 300 J

The flame resistance belt designated for general use, e.g. in underground operations.

CHEMICAL SERVICE Chemical Resistant

For handling variouskinds of chemicals. Please contact BANDO or your nearest BANDO agent.