here's the installation instructions. Mount the image file Install bye clicking Setup.exe Use as Serial 666-69696969, 667-98989898, 400-45454545, 066-66666666 any of the four serials. Use as Product Key 448F1 Finish the installation & restart Autodesk Before activating the product be sure to DISABLE your internet connection first. Click activate you must Select I have an activation code from Autodesk HERE IS ONE OF THE IMPORTANT PART TO AVOID the error "Make sure you can write to current directory" Go where you mount the image file,open the folder crack Copy the keygen to installation directory[mine is C:Program FilesAutodeskAutoCAD 2014] Run the keygen[named xf-adsk2014] from inside the autocad directory w ith admin rights [BTW the keygen may depend if y ou're running 32bit or 64bit [in my case i'm using 64bit] Click PATCH[and you should see successfully patched] Go back to autocad and copy t he request code into the keygen and click GENERATE Now copy the activation code back to t he activation screen and click Next AND you have a fully registered autodesk product now! *add a new folder in c:windows *open the autocad p&id 2008(32 bit),extract all the files to c:windows ew folder *run the setup,click on install products *configure the installation: .for the license type optionselect network license .for the name of the server that will run the network license manager-type the pc name(control panelsystemcomputer name) *ignore all errors,finish the installation process *rerun the setup,click on install tools and utilities,finish the installation process *add a new folder in c: .name:flexlm *copy the adesk from c:windows ew foldermagnitude,paste it to c:flexlm *open the adesk with notepad,change the ff: ."this_host" to pc name ."adskflex" to adskflex "C:Program F ilesAutodesk Network License Manageradskflex.exe" *copy the licpath from c:windows ew foldermagnitude,paste it to c:program filesautodesk network license managerlicense *copy all the conte nts of adesk,open the licpath with notepad,paste,enter,save adesk and licpath *add a new txt file in c:program filesautodesk network license manager .name:Debug .change the file extension from .txt to .log *launch the lmtools from desktop,click on config services tab,browse for the ff: .path to the lmgrd.exe file -c:program filesautodesk network license managerlmgrd.exe .path to the license file-c:program filesautodesk network license managerlicenselicpath.lic .path to the debug log file-c:program filesautodesk network license managerdebug.log *check the use services and start server at power up,click on save service *click on start server under start/stop/reread st art/stop/reread tab *click on perform status enquiry under server status tab *right-click on my computer,click on *right-click on my computer,click on properties,click on advanced tab,c lick on environment variables,click on new under system variables .variable name:ADSKFLEX_LICENSE_FILE .variable value:c:flexlmadesk.dat *click on ok *copy acad2008 from c:windows ew foldermagnitude,paste it to installation folder,right-click it,create shortcut on desktop *restart your pc *launch acad2008 from
desktop,click on about,click on product information,click on update,use this serial #:666-66666666 *delete the new folder in c:windows
