MODUL DITUJUKAN UNTUK PENGEMBANGAN SKILL/ KEMAMPUAN MAHASISWAFull description
Autocad 2d
Deskripsi lengkap
Descripción completa
Full description
Descrição completa
Full description
AutoCAD Self-paced Learning Modules ®
AutoCAD 2D Module 11 Competency Test No.2 Learning Outcomes: When you have completed this module, you wil l be able to:
1. Within a one hour time limit, complete a written exam and a lab exercise without the aid of a key.
Competency Tests The AutoCAD Self-paced Learning Learning Modules are are written as competency competency based modules. What that means to you as a student is that you have not completed each module until you have mastered it. To master a module, you must must prove you understand the material contained in itit and complete the lab exercise(s) with 100% accuracy within the specified time limit. In a Competency Test Module there are multiple choice questions and a comprehensive lab exercise to test your mastery of the set of modules you just completed. completed. There is no key supplied with this module as it is meant to be checked by your instructor. If there are any parts of this module that you have trouble completing you should go back after you complete it and reread the modules containing containing the information you are having trouble with. If necessary, redo the lab exercise(s) in that module(s).
Students attending this Course in a Classroom Setting If you are a student completing this course in a classroom setting, your instructor will give you instructions on what to do after you complete this module.
Students Completing this Course by Correspondence Complete the following steps: Step 1
Answer the 10 multiple multiple choice questions on on pages 11-2 to 11-3. Record the answers.
Step 2
Complete Lab Exercise 11-1 on page 11-4.
Step 3
Login into the website www.cadinstructors.com with your name and ID number. In the website, write the online written test for Module 11 - Competency Test No. 2. It has the same 10 questions that you answered in Step 1.
Step 4
Attach the file AutoCAD 2D Lab 11-1.dwg to the test when you write write it. Follow the prompts when you are writing the test.
Step 5
If you have any problems completing Steps 1 to 4, ask your instructor for help.
Open Book -1 Hour Time Limit Multiple Choice Questions
Part A
1.
When you want to snap to the center point of a line, what object snap location would you snap to? A) Halfpoint B) Center C) Quadrant D) Midpoint E) Endpoint
2. What scale should you draw almost all objects in AutoCAD? A) 1:50 B) 1:10 C) 1:2 D) Full Scale E) You don't draw in scale in AutoCAD.
3. What is the name of the visual aid that helps you see and locate object snap modes more efficiently? A) Snapmode B) AutoSnap C) SnapAuto D) AutoCADSnap E) AutoMode 4 What coordinates are the best to set the lower left corner of the limits of the drawing? A) 0,0 B) 2,2 C) 4,4 D) 6,6 E) 8,8 5. What is the smallest rectangle that will fit around all the existing objects in the drawing called? A) The drawing border B) The drawing grid C) The drawing mode D) The drawing extents E) The drawing size
6. What command sets the number of sides that AutoCAD uses when it regenerates circles and arcs? A) VIEWRES B) REGEN C) CIRCLE D) ARC E) VIEW 7. What function key toggles AutoSnap? A) F1 B) F2 C) F3 D) F4 E) F5
8. What is the name of the four object snap points located around a circle? A) Center B) Midpoint C) Endpoint D) Points E) Quadrants
9 What does the polar coordinate @10<125 mean? A) From the last point, go 12.5 units at an angle of negative 10 degrees B) From the last point, go 10 units at an angle of negative 125 degrees C) From the last point, go 125 units at an angle of positive 10 degrees D) From the last point, go 10 units at an angle of positive 125 degrees E) From the last point, go 125 units at an angle of negative 10 degrees
10.
What polar coordinate would draw the same angle as @5<225? A) @5<-125 B) @5<-225 C) @5<-135 D) @5<-145 E) @5<-165
Instructions: 1. Setup the layers using the Layering Scheme shown above. 2. Draw the object shown below using the layering scheme abov e. 3. Draw all construction objects on l ayer Construction. 4. Turn layer Key off and freeze layer Construction. 5. Save and close the drawing.
