ASSET Geo User Reference Guide For Version 9.0
Confidentiality, Copyright Notice & Disclaimer Due to a policy of continuous product development and refinement, TEOCO Ltd. (and its affiliates, together “TEOCO”) reserves the right to alter the specifications, representation, descriptions and all other matters outlined in this publication without prior notice. No part of this document, taken as a whole or separately, shall be deemed to be part of any contract for a product or commitment of any kind. Furthermore, this document is provided “As Is” and without any warranty. This document is the property of TEOCO, which owns the sole and full rights including copyright. TEOCO retains the sole property rights to all information contained in this document, and without the written consent of TEOCO given by contract or otherwise in writing, the document must not be copied, reprinted or reproduced in any manner or form, nor transmitted in any form or by any means: electronic, mechanical, magnetic or otherwise, either wholly or in part. The information herein is designated highly confidential and is subject to all restrictions in any law regarding such matters and the relevant confidentiality and non-disclosure clauses or agreements issued with TEOCO prior to or after the disclosure. All the information in this document is to be safeguarded and all steps must be taken to prevent it from being disclosed to any person or entity other than the direct entity that received it directly from TEOCO. TEOCO is a trademark. All other company, brand or product names are trademarks or service marks of their respective holders. This is a legal notice and may not be removed or altered in any way. COPYRIGHT © 2015 TEOCO LTD. ALL RIGHTS RESERVED.
Your feedback is important to us: The TEOCO Documentation team takes many measures in order to ensure that our work is of the highest quality. If you found errors or feel that information is missing, please send your Documentation-related feedback to
[email protected] Thank you, The TEOCO Documentation team
Change History This table shows the change history of this guide: Edition
Date
Reason
1
24 September 2015 First edition.
Table of Contents
Table of Contents Introduction ...................................................................................................................... 7 About ASSET Geo ............................................................................................. 7 Generating and Downloading Maps with ASSET Geo .................................................8
5
ASSET Geo 9.0 User Reference Guide
6
Introduction
Introduction ASSET Geo is a module that enables you to combine the benefits of the TEOCO Geo Server and ASSET, by using geo-located traffic and performance maps within ASSET to assist the planning process. This combination of resources can help you to plan your network with greater accuracy and more confidence. ASSET is a powerful planning and analysis tool for the design and simulation of cellular networks. Functionality includes hierarchical network planning, propagation modeling, service definition, neighbour list definition, automatic frequency planning, analysis arrays, detailed reporting, and simulation of network performance. The TEOCO Geo Server is a call trace post-processing and geo-location engine that can produce traffic and performance maps. It locates and correlates network and subscriber data into a realtime, integrative geo-display, and generates Geo Maps for an accurate view of the network to identify areas that may require targeted analysis and optimisation. For further information on the above products, contact TEOCO.
About ASSET Geo ASSET Geo generates and downloads maps from the TEOCO Geo Server in a format that is equivalent to an ASSET array. This enables you to perform the usual functions in ASSET, such as displaying the information in the Map View, statistical reports, and so on. The available maps include Performance maps (such as signal coverage, signal quality, pilot pollution) and Traffic maps (such as busy hour users). Important: The ASSET Geo module runs independently of ASSET. You can choose to launch it from inside or outside your ASSET project. It is not compulsory to have your ASSET project open when you run ASSET Geo. The only time you need your ASSET project open is when the requested maps are fully downloaded to your designated target folder and you are at the stage where you want to load the files into the Array Manager in ASSET. The generating and downloading process and downloading process is dependent on the available network bandwidth. You will need a user name and password to access the TEOCO Geo Server. ASSET Geo is a separately licensed module. The licence is not incorporated within the ENTERPRISE Licence Administrator dialog box. The licensing is synchronised with the opening and closing of the dialog box, so users should close the ASSET Geo dialog box when not using it. If you need any support with the ASSET Geo module, please contact your regional Product Support centre.
7
ASSET Geo 9.0 User Reference Guide
Here is an example of the ASSET Geo dialog box:
Example of ASSET Geo dialog box
Generating and Downloading Maps with ASSET Geo Before using the module, please see the important information in About ASSET Geo on page 7. To use ASSET Geo: 1. Launch the module in one of two ways: o
Within ASSET, click the ASSET Geo window
button at the top-right of the Map View
- or o
Navigate to Program Files\TEOCO\ENTERPRISE V9.0 and double-click the AssetGeo.exe file.
The ASSET Geo dialog box appears.
8
Introduction
2. There are two options under the Edit menu. For details, see About the Edit Menu on page 10. 3. Under Destination Folder, specify the target folder for storing the generated files (and the log file). You can use the Browse button if required. 4. Under TEOCO Geo Server, specify the URL where the server holds the maps. Note: The URL format must be as follows: http://
: 5. Enter the User and Password details that you have been specifically given to access the server, then click Login. 6. Under Markets, select the geographic/commercial region you are interested in. 7. Click the Retrieve Market Options button. This activates the options relevant to the Market you have chosen. 8. Select Date From and Date To, to specify the required date range. 9. Select the Map Category, as required. 10. The Available Maps drop-down list shows the maps available for the chosen category. Select the required map. For information on the potential range of maps, see About the Available Maps on page 11. 11. Select the required File Format. The options depend on the type of map selected. If you choose a TRR file, there is an option to automatically decompress the file on download. For information on the potential range of file formats, see About the Available File Formats on page 13. 12. Optionally, if you want to specify one or more filters, use the Add Filter button (you can use the Clear button to remove them). This allows you to select filters, such as mobility, indoor/outdoor and service types, if you want to limit the data downloaded from the requested maps. For example, you may want to only include outdoor subscribers who are moving. For more information, see About the Available Filters on page 14. 13. Click the Request Map button. The requested map is generated and eventually downloaded to your destination folder, accompanied by a log file. You can click the Open Destination Folder button to view the folder. 14. If required, repeat the appropriate steps to request more maps. ASSET Geo lists the progress of each download in the bottom pane. The generating and downloading process will be dependent on the available network bandwidth.
9
ASSET Geo 9.0 User Reference Guide
After the Process is Complete When the generating and downloading process is complete: You can load the files into the Array Manager in ASSET (this is not applicable to the TIFF file format); the arrays appear in the Map View's list of Data Types, and you can display and analyse them in the usual way. The Array Manager and Map View are described in the ENTERPRISE User Reference Guide. If you right-click on a 'successfully downloaded' file, you can see two options: o
Open Destination Folder - this auto-selects the downloaded file in the destination folder.
o
Resubmit Map - this enables you to regenerate the map request in the event of a failure.
You can load the arrays into Array Manager using the Load button or by dragging and dropping the files. The majority of the arrays will appear in the Array Manager with a generic name ('Calculation result - Float'). You can change this as required for each array, by using the Compound Array Generator, which is described in the ASSET User Reference Guide. When you have finished, you should close the ASSET Geo dialog box so that the licence is released.
About the Edit Menu In the ASSET Geo dialog box, there are extra options under the Edit menu. Coordinates If you want to extract a reduced area of a map (rather than the whole area of the bounding polygon of the chosen market), you can overwrite the coordinates. You need to do this before clicking the Request Map button. To do this: 1. From the Edit menu, click Coordinates. 2. Specify the Decimal Lat-Long coordinates for your required polygon. Here is an example:
3. Click OK.
10
Introduction
Note: The polygon defined by the coordinates translates in the TEOCO Geo Server to a selection of the cells contained in that polygon, and data for the map will be from the raw data collected from those cells. Often, an outward-facing cell that exists close to the edge of the polygon will have most of the events collected for it positioned outside of the polygon. This means the originally specified polygon extents may be expanded to include those events. In areas where the network is dense and each cell serves a small area, this added area would be relatively narrow; where the network is less dense, the added area may be wider.
3GA Header Names For the 3GA file format, there is an option to show the header name that corresponds to the selected map. In the ASSET Geo dialog box, this would appear next to the File Format drop-down box. However, we strongly recommend that this option is used by Advanced Users only. If you wish to use it, please contact Product Support first.
About the Available Maps In the ASSET Geo dialog box, you will see an 'Available Maps' drop-down list. Note: The range of maps you see in the dialog box will depend on the version of the TEOCO Geo Server being used, and may vary according to the Network Equipment Vendors available in your selected market. New maps are regularly added to the TEOCO Geo Server: for new map availability please contact your TEOCO representative.
This table lists the available UMTS maps with their corresponding descriptions: (Not all maps are available for all Network Equipment Vendors.) Available UMTS Maps
Description of what the Map Displays
Downlink Throughput (Mbps)
RLC throughput on the downlink.
Downlink Throughput Peak (Mbps)
Highest RLC throughput on the downlink.
Uplink Throughput (Mbps)
RLC throughput on the uplink.
Uplink Throughput Peak (Mbps)
Highest RLC throughput on the uplink.
Downlink Volume (MB)
Volume of RLC data received by the UE on the downlink.
Uplink Volume (MB)
Volume of RLC data transferred by the UE on the uplink.
Penetration Loss (dB)
The additional pathloss incurred when the UE is in an indoor location.
Ec/Io - Best Server (dB)
Value of the average best server Ec/Io measurements, per bin. Displays only samples in which the best server is in the selection. The best Ec/Io value is taken from each sample, and the average of all the samples is displayed for each bin.
Ec/Io - Coverage (dB)
Displays only those samples with at least one leg in the selection. For each sample, the best Ec/Io values of the legs in the selection are used, even if they are lower than the sample's best Ec/Io value. The average of all the samples is displayed for each bin.
Ec/Io Coverage Peak (dB)
Highest Ec/Io reported per bin that is the peak Ec/Io out of all the legs that are part of the selection.
11
ASSET Geo 9.0 User Reference Guide
Available UMTS Maps
Description of what the Map Displays
Pilot Pollution (%)
Percentage of samples in the bin that have pilot pollution. The TEOCO Geo Server checks all measurements that are associated with the bin, and have at least three legs in the active set, and classifies measurements as polluted if the Ec/Io level of the best leg is less than -10 dB.
Pilot Dominance (%)
Percentage of samples in the bin that have pilot dominance. The TEOCO Geo Server checks all samples associated with the bin, and classifies samples as having pilot dominance if there is a difference of at least 6dB between the strongest and second strongest legs in the active set. (This value is defined in the PILOT_DOMINANCE_DELTA_UMTS parameter, in the Advanced Network Properties.)
Number of Polluting Pilots
Displays only those samples in which the best server is in the selection. The number of polluting pilots is taken from each sample, and the average of all the samples is displayed for each bin. (The difference (in dB) from the best serving pilot’s Ec/Io at or below which a pilot is considered a polluter is based on the value of the POLLUTING_PILOT_THRESHOLD parameter, in the Advanced Network Properties.)
Soft HO Factor
Average potential number of serving BTSs per bin, meaning the number of NodeBs in the active set as well as the ones that should have been added to the active set, based on the 1a threshold.
Softer HO Factor
Average potential number of sectors serving the bin, meaning the number of sectors in the active set as well as the ones that should have been added to the active set, based on the 1a threshold.
RSCP Best Server (dBm)
Displays only those samples in which the best server is in the selection. The best RSCP value is taken from each sample, and the average of all the samples is displayed for each bin.
RSCP Coverage (dBm)
Displays only those samples with at least one leg in the selection. For each sample, the best RSCP values of the legs in the selection are used, even if they are lower than the sample's best RSCP value. The average of all the samples is displayed for each bin.
RSCP Coverage Peak (dBm)
Maximum RSCP value for the strongest leg in each record. If only one cell is selected, the map will display the peak RSCP of each bin in the selected cell, for any leg in which the sector appears. If more than 1 cell is selected, for each sample the TEOCO Geo Server considers the peak RSCP reported for all the legs that are part of the selection.
UE TX Power (dBm)
Displays only those samples in which the best server is in the selection. The User Equipment Transmit power value is taken from each sample, and the average of all the samples is displayed for each bin.
Busy Hour Traffic (milliErlang)
Daily busy-hour traffic, in milliErlangs, for open connections.
Busy Hour Call Origination
First message in each call for the busy-hour traffic, measured in calls.
Busy Hour Total Number of Users
Total number of users, over time, that generated successful calls for all call types (circuit, streaming, interactive). The calls are counted on the best server only.
Busy Hour Minutes of Use
Busy-hour traffic, in minutes.
Most of the arrays will appear in the Array Manager with a generic name 'Calculation result - Float'. You can change this as required for each array, by using the Compound Array Generator, which is described in the ASSET User Reference Guide.
12
Introduction
About the Available File Formats In the ASSET Geo dialog box, you will see a 'File Format' drop-down list. Note: The range of maps you see in the dialog box will depend on the version of the TEOCO Geo Server being used, and may vary according to the Network Equipment Vendors available in your selected market. New maps are regularly added to the TEOCO Geo Server: for new map availability please contact your TEOCO representative.
This table lists the available UMTS file formats against the maps and map types: (Not all maps are available for all Network Equipment Vendors.) Map Type
Available UMTS Map
Supported File Formats TIFF
3GA
TRI/TR R
Performance
Downlink Throughput (Mbps)
Y
Y
Performance
Downlink Throughput Peak (Mbps)
Y
Y
Performance
Uplink Throughput (Mbps)
Y
Y
Performance
Uplink Throughput Peak (Mbps)
Y
Y
Performance
Downlink Volume (MB)
Y
Y
Performance
Uplink Volume (MB)
Y
Y
Performance
Penetration Loss (dB)
Y
Y
Performance
Ec/Io - Best Server (dB)
Y
Y
Performance
Ec/Io - Coverage (dB)
Y
Y
Performance
Ec/Io Coverage Peak (dB)
Y
Y
Performance
Pilot Pollution (%)
Y
Y
Performance
Pilot Dominance (%)
Y
Y
Performance
Number of Polluting Pilots
Y
Y
Performance
Soft HO Factor
Y
Y
Performance
Softer HO Factor
Y
Y
Performance
RSCP Best Server (dBm)
Y
Y
Performance
RSCP Coverage (dBm)
Y
Y
Performance
RSCP Coverage Peak (dBm)
Y
Y
Performance
UE TX Power (dBm)
Y
Y
Traffic (see note) Busy Hour Traffic (milliErlang)
Y
Y
Y
Traffic (see note) Busy Hour Call Origination
Y
Y
Y
Traffic (see note) Busy Hour Total Number of Users
Y
Y
Y
Traffic (see note) Busy Hour Minutes of Use
Y
Y
Y
Note: For Traffic Map Types, values in a 3GA file represent absolute values, whereas in a TRR file the values represent densities. 13
ASSET Geo 9.0 User Reference Guide
About the Available Filters In the ASSET Geo dialog box, there are a variety of filters available. There are three groups: Indoor/Outdoor, Mobility and UMTS Service Options. A maximum of one filter can be chosen from each group. If you choose a filter from more than one group, they will operate on an AND basis. These three tables list the filters available: Filters - Indoor/Outdoor Indoor Indoor and Outdoor Outdoor Unknown (this is data that has not been classified as any of the above).
Filters - Mobility Moving Static Static and Non Stationary Unknown (this is data that has not been classified as any of the above).
Filters - UMTS Service Options SRB for call attempts Speech AMR HSDPA PS DCH CS 64 video call PS interactive Speech multi-RABs PS domain DCH/FACH interactive HSDPA multi-RABs PS R99 CS speech Data multi-RABs Speech 12.2 DCH/FACH data Data + Speech multi-RABs SRB Stand-alone CS domain HSUPA HSDPA interactive CS speech voice only HSDPA streaming
14