Antenna Catalogue

Terrestrial Microwave Antenna System Products 36

Terrestrial Microwave Antenna Nomenclature Andrew uses an alphanumeric numbering system for identification and ordering of terrestrial microwave antennas. Andrew type numbers describe antenna type, size and operating frequency band. The system is known worldwide, and many governments, PTTs and OEMs use Andrew terminology such as “HSX type performance” to specify antennas within their equipment procurement documents. Example:

1

2

3

HSX

10

-

59

PL

8

-

71

KP

6

-

19

F

4

5 W

1. Antenna Type. The prefix is one, two, three or four letters that describe the antenna type. “X” within the prefix indicates dual-polarized operation. For Standard Antennas, “L” indicates low VSWR antennas operating with: Coaxial feed systems of 1.10 (26.4) RL or better Waveguide feed systems of 1.06 (30.7) RL or better. 2. Antenna Size. The number indicates antenna diameter in feet.

Prefix

Antenna Type or Description

KP_F, KPR_F

Knockdown GRIDPAK® Parabolic

MKP

Mini Knockdown GRIDPAK Parabolic

P, PX, P_F

Standard Parabolic-Unshielded

PL, PL_F, PXL, PXL_F

Standard Parabolic, Low VSWR-Unshielded

FP, FP_F, FPX

Standard Focal Plane Parabolic-Unshielded

FPHP

Focal Plane High Performance

HP, HP_F, HPX

High Performance Parabolic-Shielded

HSX

High Performance Super High Cross Polarization Discrimination-Parabolic

UHP, UHX, UHP_F

Ultra High Performance Parabolic

UMX

Ultra High Performance Multiband Parabolic

HDX, HDH, HDV

High Performance Dual Beam-Parabolic

PDV, PDH

Standard Dual Beam Angle Diversity

KPR

Knockdown GRIDPAK Parabolic-Rural Telephony

PAR, PARX

Parabolic Antenna for Relocation-Category A

LB, LBX

Low Back Lobe

3. Pressurization. Antennas having an “F” following the antenna size include a foam-dielectric feed and do not require pressurization. All other antennas have air-dielectric feeds and require pressurization. See pages 242-271 for pressurization equipment. 4. Frequency Band. The numbers following the hyphen are an abbreviated designation for the operating frequency band. For example: Abbreviation 19 59 107

Frequency Band 1.9 - 2.3 GHz 5.925 - 6.425 GHz 10.70 - 11.70

5. Wide band. A “W” following the frequency band designator indicates wide band operation for special applications. For example: PL12-71 indicates the frequency band 7.125-7.750 GHz PL12-71W indicates the frequency band 7.100-8.500 GHz

38

Customer Service Center - Call toll-free from: • U.S.A., Canada and Mexico 1-800-255-1479

Antenna Types Shielded Antennas Shielded antennas include a low-VSWR feed, painted reflector and shield with RF absorber, a planar radome and a mount for attachment to a vertical pipe. This series of antennas provides excellent radiation characteristics, rugged construction and high environmental survivability. Special environmental versions are available for the most difficult system locations. Many are also available with one or two-piece reflectors for efficient and less costly shipping.

Ultra Series

Ultra High Performance Antennas UHX® and UHP® Series antennas provide high gain, low VSWR and superior radiation pattern performance for easier frequency coordination. They minimize frequency congestion problems because of a highly efficient beam-forming feed and superior pattern performance. UHX Series feature dual polarization. UHP Series are a single polarized version.

Ultra Multiband Antennas UMX® Series antennas provide simultaneous dual-band, dual-polarized (4-port) operation in various frequency bands. These antennas can save considerable cost by reducing the installation expense and the amount of equipment required on systems with multiple frequency requirements. UMX antennas allow easy single to multiband transition without compromising high performance.

• U.K. 0800-250055 • Australia 1800-803 219 • New Zealand 0800-441-747

High Performance Series

High Performance Antennas HP and HPX Series antennas feature high performance at low lifetime cost. They are mechanically similar to the UHX ultra high performance antennas, except most models have feeds which do not include the beam-forming feature. HPX Series feature dual polarization; HP Series are a single polarized version.

Visit us at: www.andrew.com

39

Antenna Types

HSX Series Antennas - High XPD Microwave Antennas HSX Series antennas are high performance antennas which feature very high cross polarization discrimination (XPD) in both the azimuth and elevation planes. The guaranteed XPD for these antennas is 40 dB. These antennas are suitable for high capacity digital systems, utilizing transmission schemes such as Synchronous Digital Hierarchy (SDH). This performance is achieved through the use of an antenna feed horn with a unique illuminator ring design and strict quality control measures in the manufacture of these feeds.

Keyhole specifications for XPD

The cross polarization characteristics close to the boresight of the antenna are shown in the figure below. These values apply for antennas up to the 11 GHz frequency band. For antennas at frequency bands higher than 11 GHz, the XPD is greater than 36 dB within the circular -1 dB co-polar contour and greater than 30 dB elsewhere. The HSX Series antennas are available for frequency bands from 3.4 to 18 GHz. Elevation

HSX Antennas 2-Dimensional Cross-Polar Characteristics

+ 1.5 Degrees Elevation

Azimuth

1 dB Co-Polar Contour - 1.5 Degrees Elevation ±0.1 Degrees Azimuth

• 40 dB XPD at antenna boresight • 40 dB* XPD inside rectangle (±0.1 degrees Azimuth, ±1.5 degrees elevation) • 36 dB XPD inside the 1dB co-polar contour • 30 dB XPD elsewhere * 36 dB for 15 ft antennas

40


Antenna Types

Focal Plane High Performance Antenna

Low Back Lobe Antenna

LB and LBX Antennas LB and LBX antennas are special low back lobe antennas with performance similar to that of focal plane antennas. These antennas are ANATEL Brazilian Telecommunications Agency approved and shipped from the manufacturing facility in Sorocaba, Brazil.

Dual Beam Angle Diversity Antenna

Dual Beam Angle Diversity Antennas

FPHP Antennas FPHP antennas combine the traditional focal plane reflector with the added electrical performance of narrow shielded antennas. The added performance is obtained through the use of an integrated shield located within the molded radome, included with the antenna. These antennas are available in the 1.3 GHz band and are ETSItype approved.

Angle Diversity antennas are special solution antennas that provide a dual beam in either a single or dual polarized version. They can help overcome multipath fading issues when installation of two antennas is impractical due to tower space availability or wind loading.

NOTE: See page 120 for default packing options.



41

Antenna Types

Standard Parabolic Antenna

Standard Focal Plane Antenna

Flat Panel Array Antenna

! NEW

Standard Parabolic Antennas P, PL, PX and PXL Series Standard Parabolic antennas are unshielded parabolic antennas that provide economical and reliable service where a high degree of back and side radiation suppression is not necessary. • Low-VSWR versions minimize echo distortion for less noise on the system • A vertical tower mount is included. Optional mounts and radomes can be ordered separately for versatility of installation • Single and dual-polarized options are available in most applicable frequencies • Spun aluminum reflectors provide long term reliability and minimize environmental distortion to protect system investments • Rugged, high-quality performance at low initial costs

42

Standard Focal Plane Antennas FP and FPX Series Standard Focal Plane antennas are ideal for use in higher capacity systems where improved front-to-back ratios are required. • Special deep reflectors and a unique beam-shaping feed or special edge geometry achieve efficient pattern performance. The antennas combine reasonable initial cost with very long-life performance, thus assuring long term economy. • Single and dual-polarization options are available

FPA

Flat Panel Array Antennas

The Flat Panel Array (FPA) Series antennas are designs that provide solutions for many applications including spread spectrum and UNII frequency band operation. The low profile has an aesthetically pleasing appearance and eases the planning and zoning process. The antennas incorporate a convenient rear mounted connector. The mount is easily assembled and readily attaches the antenna onto a vertical pipe. The antennas are available at a variety of frequencies. Contact Andrew for more information.

• Includes a vertical tower mount for ease of tower interface

NOTE: See page 120 for default packing options.


Standard Antenna Construction Reflectors Antennas are supplied with either one-piece reflectors or two-piece reflectors for on-site assembly. All 2-10 ft reflectors are one-piece; 12 and 15 ft reflectors are twopiece. Split (two-piece) reflectors are available as an option for 8 and 10 ft antennas. Solid (one-piece) reflectors are available as an option for 12 ft antennas. KP Series GRIDPAK® antennas are supplied completely disassembled. Microwave Antenna Feeds Product improvement research has produced an innovative feed hub which provides several important advantages over previous designs. Solid reflector hubs are fully compatible with previous reflectors manufactured since 1975 and other versions having an 8.5 in (216 mm) center mounting hole in the reflector.

Feed hub used on Ultra High Performance, HIgh Performance, Focal Plane and Standard Antennas, 4-ft (1.2 m) and larger, with waveguide feeds.

• Simplified installation. The unique hub design allows most feeds to be installed from either side of the reflector. This feature permits easy initial installation from the front of the reflector and makes it possible to change or inspect most feeds from the rear of the antenna. • Smooth, accurate polarization adjustment. A conductive compound is used at the reflector/hub interface. The lubricating properties of this compound ensure smooth, accurate feed rotation. • Enhanced electrical performance. Positive RF seals at all critical interfaces reduce RF leakage to negligible levels and result in enhanced antenna electrical performance. • Improved resistance to corrosion. Potential corrosion in all areas critical to antenna system performance is effectively eliminated through the use of electro-chemically compatible materials and corrosion inhibiting compounds. The hub interface has been salt spray tested for more than 7500 hours and meets the corrosion resistance requirements of U.S. Military Specifications MIL-F-14072C, MIL-STD-889B and MSFC-SPEC-250A. Feed Types Coaxial feeds are used below 3 GHz and are air- or foamdielectric type. F-series antennas have foam-filled feeds that are designed for use with HELIAX® foam-dielectric cable. Guy lines or rods are included with all feeds except some antennas smaller than 12 ft (3.7 m), where they are unnecessary. Most feeds above 3 GHz are terminated with rectangular waveguide flanges. Guy lines are used with all waveguide feeds.



45

Standard Antenna Construction Radomes

Antenna Finish

Radomes are used to protect microwave antennas against accumulation of ice, snow, and dirt and to reduce wind loading. All Andrew shielded antennas include a planar radome. Antennas which include a radome are indicated in the antenna specification tables on pages 116-119. Optional molded radomes, listed on page 118, are available for most other solid reflector, standard unshielded parabolic antennas.

Standard colors for microwave antennas and radomes are listed in the table below. Other colors in compliance with U.S. FCC and U.S. FAA regulations or special applications are available on request. Unless otherwise specified, radomes supplied with special color antennas will be the standard color. For optional TEGLAR radome colors, see page 116.

Radomes for shielded antennas. All Andrew shielded antennas, except ValuLine® include a flexible planar radome. The radome is stretched across the opening of the shield (through tensioning springs) flexing slightly in the wind to shed ice and snow in most environments. Two types of flexible planar radomes are used, TEGLAR® and Hypalon. Hypalon is a rubber coated nylon and is provided with HP and HPX series antennas. TEGLAR is a polymer-coated fiberglass material and is provided with HSX, UHX and UMX type antennas. In addition, TEGLAR radomes are extremely durable, and excel in resistance to heat, rain, snow, fungus, ice accumulation, corrosive atmosphere and ultraviolet light. Upgrades to TEGLAR on HP and HPX series is optional. Pre-tensioned radomes. Some high performance antennas are supplied with a pre-tensioned radome. Pre-tensioned radomes are made from TEGLAR® material bonded to a support ring. They replace the previously offered spring tensioned design.

Microwave Antenna and Radome Standard Colors Description

Standard Color

Shielded Antennas

Gray

Radomes for Shielded Antennas 4-15 ft (1.2-4.6 m)

White

Standard Antennas

Gray

Molded Radomes for Standard Antennas

Gray

GRIDPAK® and Mini-GRIDPAK® Antennas

Unpainted aluminum

Radomes for standard antennas. Molded radomes are manufactured of ABS plastic or fiberglass. They help reduce tower wind loading and are optional for most antennas. Mounts All microwave antennas are supplied with a vertical tower mount. Roof, vertical tilt and horizontal tilt mounts are available as options. Shields Cylindrical shields, attached to the reflector rim, improve the radiation pattern performance of parabolic antennas. RF absorbing material is placed at critical locations inside the shield to reduce RF energy reflections.

46


Microwave Antenna Selection Criteria

Operating frequency band. The antennas on pages 51-91 are listed in order of ascending operating frequency. Antennas for simultaneous operation in two or more bands are offered on pages 93 and 94. Radiation patterns determine an antenna’s ability to discriminate against unwanted signals under conditions of radio congestion. Radiation patterns are dependent on antenna series, size, and frequency. A Radiation Pattern Envelope (RPE) comparison of various antenna series is shown at the right. For more information, see page 48.

RPE Comparison at 6 GHz 0

Pressurization. All antennas with air-dielectric coaxial or waveguide feeds should be pressurized. F-Series antennas eliminate the need for pressurization equipment, since the foam-filled feeds are void free and sealed to preclude the presence of moisture. Wind load. Survival ratings are specified on page 49. Wind forces for various antenna types and sizes are tabulated on pages 111-113. GRIDPAK® antennas, available below 3.7 GHz, have significantly lower wind load than solid antenna types.

30 40 50 60 70 80

100

5

10

15 20 40

60 80 100 120 140 160 180

Azimuth Degrees From Main Lobe

RPE Comparison at 2 GHz 0

Ultra High Performance Antenna Standard Antenna GRIDPAK Antenna

10

Antenna Directivity - dB Down From Main Lobe

Polarization. Most antennas are available in both single- and dual-polarized versions. All can be used horizontally or vertically polarized and most have continuous polarization adjustment.

20

90

Gain. For a given frequency band, gain is primarily a function of antenna size. The gain of Andrew antennas is determined by either gain by comparison or by computer integration of the measured antenna patterns. The gain by integration method makes allowance for any additional signal losses such as ohmic, VSWR and cross-polarized losses. Both methods follow the recommended procedures as stated in EIA Standard 195C.

UHX Ultra High Performance Antenna and UMX Multiband Antenna Standard Antenna HP High Performance Antenna

10


Andrew offers the industry’s most comprehensive line of antennas for point-to-point microwave communication. The extremely wide range of available antennas permits you to choose an antenna that is optimized for your requirements. Nearly 6000 different configurations are available from this catalog. In choosing an antenna, the following basic parameters should be considered:

20 30 40 50 60 70 80 90 100

5

10

15 20 40

60 80 100 120 140 160 180


Shipping considerations. KP Series GRIDPAK® antennas are shipped disassembled, which results in very small shipping volume. Most 8 ft (2.4 m) and larger solid antennas are available in two piece versions to reduce shipping volume. Refer to the table on page 122.



47

Antenna Electrical Specifications Radiation Pattern Envelopes Radiation pattern envelopes (RPEs) published by Andrew present radiation pattern information in a form that is easy to use for planning radio systems. RPEs are available for all catalog microwave antennas. Copies are on file at the U.S. FCC, Industry Canada, BT, Telecom Australia, French CNET, and many other administrations throughout the world. U. S. FCC code numbers are assigned to Andrew antennas where applicable. Curves are presented in both rectangular coordinate graph and tabulated digital formats. Andrew software, included on the Powertools CD-ROM and downloadable from www.andrew.com, allows you to view RPEs for the antennas listed in the catalog. See page 44 for more information. Andrew RPEs represent the “worst peaks” envelope of radiation patterns, measured on selected units, which accurately represent the antenna type. Parallel and cross-polar patterns are measured for both horizontal and vertical polarizations. Close manufacturing control ensures this performance is maintained. Parallel and cross-polar response are represented for both horizontal and vertical polarizations. The curves are identified as follows: HH – Response of a horizontally polarized port to a horizontally polarized signal. HV – Response of a horizontally polarized port to a vertically polarized signal.

Preparation of RPEs. A complete set of radiation patterns comprises twelve measurements over the full 360° of azimuth rotation measured under still, dry conditions. These cover horizontal and vertical polarizations for each of three frequencies (bottom, middle and top) in the band, each of these in turn being measured for parallel polarized as well as cross polarized responses. Each of the four curves on the RPE is derived by superimposing the right and left side patterns for all three frequencies and then drawing an envelope composed of simple straight lines so as to encompass all peaks. The probability is high that an installed antenna will have better actual response at a specific angle and frequency than indicated on the RPE. Asymmetrical radiation patterns. HSX and UHX® high performance antennas have asymmetrical patterns with lower sidelobe levels on one side. For these antennas, RPEs are prepared for the full 360°. The superior half of the radiation pattern on either the right or left side of the antenna boresight can be used for interference evaluation to reduce potential interference. The UHX and HSX feed hubs are marked red to identify the superior side, and the hub can be rotated so as to place this side either right or left of boresight. Guaranteed RPEs for parabolic antennas. Actual radiation patterns for production antennas, under still, dry conditions, will not have any peak exceeding the current RPE by more than 3 dB. An angular accuracy of ±1° is maintained throughout. This guarantee applies to all Andrew parabolic microwave antennas unless otherwise stated on the RPE.

VV – Response of a vertically polarized port to a vertically polarized signal. 0


VH – Response of a vertically polarized port to a horizontally polarized signal.

30

Antenna Type: UHX10-59J Frequency: 6.175 GHz E-Plane Co-Polarized Right Side of RPE with “Red Right” feed orientation

40

Radiation Pattern Envelope

10 20

50 60 70 80 90 100

Measured Radiation Pattern 5

10

15 20 40 60 80 100120 140 160 180


48


Electrical Definitions The following terms describe the electrical characteristics for Andrew microwave antennas. All rated electrical characteristics listed in the tables are guaranteed to be within the tolerances stated below. Factory measurements of these electrical characteristics are made under still, dry conditions using state-of-the art equipment and techniques ensuring high accuracy. Frequency refers to the operating frequency band. These bands correspond with CCIR recommendations or common allocations used throughout the world. It is usually possible to tune antennas for slightly different frequency ranges while retaining the same electrical characteristics. Other ranges can be accommodated on special order. VSWR. Maximum, is the guaranteed peak VoltageStanding-Wave-Ratio within the operating band. Isolation between inputs of single-band, dual-polarized antennas is 35 dB minimum unless otherwise specified. Gain is stated in dBi (decibels over an isotropic radiator) at three frequencies: bottom, middle and top of band. Manufacturing tolerance for antenna gain is 0.2 dB unless otherwise specified. In the case of two-port, dualpolarized antennas, the specified gain refers to the average gain of the two ports, the gain of each port differing from the average gain by not more than 0.3 dB. Front-to-back ratio in decibels. Denotes highest radiation relative to the main beam, at 180° ±40°, across the band. Production antennas do not exceed rated values by more than 2 dB unless stated otherwise. Half-power beamwidth is the nominal total width of the main beam at the -3 dB points. Cross-polarization discrimination, in dB, is the difference between the peak of the co-polarized main beam and the maximum cross-polarized signal over an angle twice the 3 dB beamwidth of the co-polarized main beam. Power rating. All microwave antenna feeds are rated at 150 watts.

Antenna Environmental Ratings Standard ratings. Microwave antennas, including mounts and radomes, where applicable, will withstand the simultaneous wind and ice conditions specified in the table below. Except where noted otherwise in the antenna listings, all antennas will remain operational within a temperature range of -50°C to 70°C (-58°F to 158°F), and meet all other requirements of EIA/TIA Standards 222E and 195C. High wind survival. Special antenna designs with wind survival ratings up to 200 mph (320 km/h) are available. See pages 114-115. Corrosive environments. Antennas designed for corrosive environments are also available. See pages 114-115.

Wind Survival and Deflection Characteristics Survival Ratings Wind Velocity mph (km/h)

Radial Ice, in (mm)

Max. Deflection in 70 mph (110 km/h) Wind, degrees

Standard Antennas Without Radome With Standard Radome

125 (200) 125 (200)

1 (25) 1 (25)

0.1 0.1

UHX®, UMX®, UHP, HSX and HP Antennas

125 (200)

1 (25)

0.1

GRIDPAK®

125 (200)

–

–

Antenna Types

Antennas



49

3.4 - 3.7 GHz Antenna Inputs. All antenna VSWR values are specified with 7/8” EIA connectors. Other optional inputs may result in equal or slightly higher VSWR. Contact Andrew for details. Pressurization. Feeds are pressurizable to 10 lb/in2 (70 kPa).

Type Number

Diameter ft (m)

Low

Gain, dBi Mid-Band

Top

Beamwidth Degrees

Cross Pol. Disc., dB

F/B VSWR Ratio max. dB (R.L., dB)

GRIDPAK® Antennas– Unpressurized Single Polarized Antenna Inputs: 7/8” EIA, “F” Flange Female, Type N Female, and 7-16 DIN Female

KP KP2F-34 KP3F-34 KP4F-34 KP6F-34 KP8F-34

Regulatory Compliance RPE U.S. FCC ETSI ETSI Number(s) 101 74 78 Class Gain

2 (0.6) 3 (0.9) 4 (1.2) 6 (2.0) 8 (2.4)

4423 4424 4425 4426 786

– – – – –

– – – – –

– – – – –

– – – – –

– – – – –

23.6 27.2 29.2 33.8 35.1

23.7 27.7 29.8 34.2 35.5

23.6 27.3 29.7 34.5 35.8

8.7 6.2 4.3 2.9 2.6

28 28 32 30 30

22 25 26.5 31 35

1.35 (16.5) 1.30 (17.7) 1.30 (17.7) 1.35 (16.5) 1.30 (17.7)

3.4 - 3.7 GHz* with Coaxial Feeds Antenna Inputs. All antenna VSWR values are specified with 7/8” EIA connectors. Other optional inputs may result in equal or slightly higher VSWR. Contact Andrew for details. Pressurization. Feeds are pressurizable to 10 lb/in2 (70 kPa).

Type Number

Diameter ft (m)

2 (0.6) 4 (1.2) 6 (1.8) 8 (2.4)

Top

Beamwidth Degrees



4416 4418 4420 4422

– – – –

– – – –

– – – –

– – – –

– – – –

22.7 29.1 32.9 35

23 29.5 33.3 35.4

23 29.8 33.6 35.7

10.7 4.7 3.5 2.5

30 30 30 30

34 41 44 48

1.35 (16.5) 1.30 (17.7) 1.20 (20.8) 1.20 (20.8)

9 4.5 3.3 2.6

30 30 30 30

26.5 33 36 40

1.35 (16.5) 1.30 (17.7) 1.20 (20.8) 1.20 (20.8)

Standard Antennas – Unpressurized Single Polarized Antenna Inputs: 7/8” EIA, “F” Flange Female, Type N Female, and 7-16 DIN Female

P P2F-34 P4F-34 P6F-34 P8F-34

Low

Gain, dBi Mid-Band

High Performance Antennas – Unpressurized Single Polarized Antenna Inputs: 7/8” EIA, “F” Flange Female, Type N Female, and 7-16 DIN Female

HP HP2F-34 HP4F-34 HP6F-34 HP8F-34


2 (0.6) 4 (1.2) 6 (1.8) 8 (2.4)

4415 4417 4419 4421

– – – –

– – – –

– – – –

– – – –

– – – –

24.3 29.6 33.7 35.2

24.5 30 33.6 35.6

25 30.3 33.6 35.9

3.4 - 3.9 GHz* with Waveguide Feeds Antenna Inputs. All antenna VSWR values are specified with CPR and PDR flanges. Other optional flanges may result in equal or slightly higher VSWR. Contact Andrew for details. Pressurization. Feeds are pressurizable to 5 lb/in2 (35 kPa), except FP Series 10 lb/in2 (70 kPa).

Type Number

Diameter ft (m)

UHX8-34** 8 (2.4) UHX10-34** 10 (3.0) UHX12-34** 12 (3.7) UHX15-34** 15 (4.6)

8 (2.4) 10 (3.0) 12 (3.7) 15 (4.6)

36.9 38.8 40.4 42.3



1469 1470 1472 1471 1473 1474 1485 1486

B B A A

– – – –

– – – –

2 2 2 2

2 2 2 2

37.5 39.4 41.0 42.9

2.4 1.8 1.5 1.2

30 30 40 30

62 62 65 66

1.06 (30.7) 1.06 (30.7) 1.06 (30.7) 1.06 (30.7)

1528 1530 1534 1532 1536 1538 1540 1542

B B A A

– – – –

– – – –

3 3 3 3

2 2 2 2

36.1 37.7 39.6 41.6

36.6 38.2 40.1 42.1

37.1 38.7 40.6 42.6

2.4 1.8 1.5 1.2

40 40 40 40

67 69 70 72

1.06 (30.7) 1.06 (30.7) 1.06 (30.7) 1.06 (30.7)

2 2

37.0 39.3

38.3 39.8

38.8 40.3

1.9 1.6

28 29

60 62

1.06 (30.7) 1.06 (30.7)

Focal Plane Antennas – Single Polarized Antenna Inputs: CPR229G and PDR40

FP 10 (3.0) 12 (3.7)

6605 6601

– B

Reference ETSI Document EN300833 for 3 to 60 GHz

60

36.2 38.1 39.6 41.6

Top

Beamwidth degrees

High Performance Antennas – Super High Cross Polarization Discrimination – Dual Polarized Antenna Inputs: CPR229G and PDR40

HSX

FP10-34 FP12-34

Low

Gain, dBi Mid-Band

Ultra High Performance Antennas– Dual Polarized Antenna Inputs: CPR229G and PDR40

UHX

HSX8-34** HSX10-34** HSX12-34** HSX15-34**


– –

– –

1 2

*Multiband antennas are available in this frequency band. See page 93.

**5 lb/in2 (35 kPa) maximum


Ordering Information for Waveguide Assemblies Frequency GHz*

Waveguide Type

Flange Type††

Connector† Tunable Pre-Tuned

Pressure Window

Flex-Twist 2 ft (0.6 m)

VSWR, max.** (R.L. dB) Up to 300 ft (90 m)

Premium Waveguide Assemblies 3.4-3.9 3.54-4.2

EWP34-34 EWP34-35

3.7-4.2

EWP34-37

CPR229G CPR229G PDR40 CPR229G

Standard Waveguide Assemblies 3.1-3.6 3.4-4.2 * ** † ††

EW34-31 EW34

134DET 134DET 134DEMT 134DET

– 134DEP-2 134DEMP-2 134DEP-1

55001-229 55001-229 223306-40 55001-229

F229PC0240CS F229PC0240CA F229MH0600HA F229PC0240CA

1.10 (26.4) 1.08 (28.3) 1.08 (28.3) 1.08 (28.3)

55001-229 55001-229

F229PC0240CS F229PC0240CS

1.15 (23.1) 1.15 (23.1)

Non-Tunable CPR229G CPR229G

134DE 134DE

– –

Contact Andrew for information on other frequency bands. VSWR, max. (R.L.,dB) Up to 300 ft (90 m). The indicated maximum characteristics are guaranteed for factory assemblies and are typical for field assemblies. “Pre-tuned” connectors are for field attachment only. “Tunable” connectors ordered with factory assemblies are factory tuned. For detailed information on mating flanges, refer to pages 214-218.

Accessories – Photos and detailed descriptions on pages 194-200 Description

Type No.

Description

Type No.

Hangers and Adapters

Other Accessories

Hanger Kit of 10, Recommended maximum spacing for outdoor installation is 4.5 ft (1.37 m)* 42396A-15 Hardware Kit of 10, 3/8" bolts, lock washers, nuts 3/4" (19 mm) long 31769-5 1" (25 mm) long 31769-1 Angle Adapter Kit of 10. Stainless steel 31768A Round Member Adapter Kit of 10. Stainless steel Member Diameter, in (mm) 1-2 (25-50) 31670-1 2-3 (50-75) 31670-2 3-4 (75-100) 31670-3 4-5 (100-125) 31670-4 5-6 (125-150) 31670-5 45° Adapter Kit of 10. Galvanized steel 42334 Threaded Rod Support, 3/8” rod, nuts, washers, ceiling bracket 12 in (305 mm) long, kit of 1 31771 12 in (305 mm) long, kit of 5 31771-4 24 in (610 mm) long, kit of 1 31771-9 24 in (610 mm) long, kit of 5 31771-6 Tower Standoff Kit of 10. 1 in (25 mm) standoff Member Diameter, in (mm) 0.75-1.5 (20-40) 30848-5 1.5-3.0 (40-75) 30848-4 3-4 (75-100) 30848-1 4-5 (100-125) 30848-2 5-6 (125-150) 30848-3 Tower Standoff Kit of 10. 2.5 in (60 mm) standoff Member Diameter, in (mm) 3-4 (75-100) 41108A-1 4-5 (100-125) 41108A-2 5-6 (125-150) 41108A-3

Splice Grounding Kit with factory attached, one-hole lug Grounding Kit with factory attached, two-hole lug Grounding Kit with field attachable crimp-on, one-hole lug Grounding Kit with field attachable crimp-on, two-hole lug Grounding Kit with field attachable screw-on lug Crimping Tool to field attach lug to Grounding Kit Hoisting Grip Bending Tool Kit. One each E and H Plane tool Connector Reattachment Kit Wall-Roof Feed Thru Waveguide Boot for Plates (below), 4 in (102 mm) dia. 5 in (127 mm) dia

*

134DZ 204989-5 241088-5 204989-25 241088-10 204989-35 207270 26985A 33586-11 33544-43 35849A-17 204679-34 48939-34

Feed-Thru Plate for Boots (above) Openings

For 4 in Boots

For 5 in Boots

1 1 2 3 4 6 8

204673-1 204673-2 – – 204673-4 – 204673-8

48940-1 – 48940-2 48940-3 48940-4 48940-6 –

Standard conditions: 125 mph (200 km/h) survival wind velocity, 0.5 in (13 mm) radial ice. For other conditions see page 196.



61

Refer to page 64 for Elliptical Waveguide ordering information

3.54 - 4.18 GHz* Antenna Inputs. All antenna VSWR values are specified with CPR and PDR flanges. Other optional flanges may result in equal or slightly higher VSWR. Contact Andrew for details. Pressurization. Feeds are pressurizable to 5 lb/in2 (35 kPa).

Type Number

Diameter ft (m)

Low

Gain, dBi Mid-Band

Top

Beamwidth Degrees



Ultra High Performance Antennas – Dual Polarized Antenna Inputs: CPR229G and PDR40

UHX UHX8-35**


8 (2.4)

2464 2463

B

–

–

3

2

36.1

36.8

37.5

2.4

30

65

1.06 (30.7)

UHX10-35** 10 (3.0)

1465 1466

A

–

–

2

2

38.1

38.8

39.5

1.8

32

65

1.06 (30.7)

UHX12-35** 12 (3.7)

1467 1468

A

–

–

2

2

39.6

40.4

41.1

1.5

32

68

1.06 (30.7)

UHX15-35** 15 (4.6)

2483 2484

A

–

–

2

2

41.6

42.3

43.0

1.2

30

65

1.06 (30.7)

3.6 - 4.2 GHz Antenna Inputs. All antenna VSWR values are specified with CPR and PDR flanges. Other optional flanges may result in equal or slightly higher VSWR. Contact Andrew for details. Pressurization. Feeds are pressurizable to 5 lb/in2 (35 kPa).

Type Number

Diameter ft (m)


Low

Gain, dBi Mid-Band

Top

Beamwidth Degrees



High Performance Antennas – Super High Cross Polarization Discrimination Dual Polarized Antenna Inputs: CPR229G and PDR40

HSX HSX8-36**

8 (2.4)

2382 2381

B

–

–

3

2

36.7

37.3

37.8

2.4

40

65

1.06 (30.7)

HSX10-36**

10 (3.0)

2383 2384

B

–

–

3

2

38.3

38.9

39.4

1.9

40

68

1.06 (30.7)

HSX12-36**

12 (3.7)

2385 2386

A

–

–

3

2

40.3

40.9

41.4

1.6

40

71

1.06 (30.7)

HSX15-36**

15 (4.6)

2396 2394

A

–

–

3

2

42.1

42.7

43.2

1.2

40

71

1.06 (30.7)

High Performance Antennas – Dual Polarized Antenna Inputs: CPR229G and PDR40

HPX HPX8-36**

8 (2.4)

1143

–

–

–

1

2

36.4

37.1

37.7

2.5

30

59

1.10 (26.4)

HPX10-36**

10 (3.0)

1144

B

–

–

–

–

38.1

38.8

39.4

1.9

30

61

1.10 (26.4)

HPX12-36**

12 (3.7)

1145

B

–

–

–

–

39.9

40.6

41.2

1.6

30

62

1.10 (26.4)

High Performance Antennas – Single Polarized Antenna Inputs: CPR229G and PDR40

HP HP8-36**

8 (2.4)

1138

B

–

–

1

2

36.4

37.1

37.7

2.5

30

59

1.10 (26.4)

HP10-36**

10 (3.0)

1139

B

–

–

2

2

38.1

38.8

39.4

1.9

30

61

1.10 (26.4)

HP12-36**

12 (3.7)

1140

B

–

–

2

2

39.9

40.6

41.2

1.6

30

62

1.10 (26.4)

Focal Plane Antennas – Dual Polarized Antenna Inputs: CPR229G and PDR40

FPX FP FPX10-36**

10 (3.0)

FPX12-36**

12 (3.7)

6805

–

–

–

–

–

38.6

39.1

39.6

1.7

26

62

1.06 (30.7)

6807

A

–

–

2

2

40.3

40.9

41.2

1.4

27

64

1.06 (30.7)

Focal Plane Antennas – Single Polarized Antenna Inputs: CPR229G and PDR40 FP10-36**

10 (3.0)

6801

B

–

-

1

2

38.6

39.1

39.6

1.7

29

62

1.06 (30.7)

FP12-36**

12 (3.7)

6803

A

–

–

1

2

40.3

40.9

41.2

1.4

31

64

1.06 (30.7)

Reference ETSI Document EN300833 for 3 to 60 GHz. *Multiband antennas are available in this frequency band. See page 93. **5 lb/in2 (35 kPa) maximum

62




Type Number

Diameter ft (m)

Low

Gain, dBi Mid-Band

Top

Beamwidth Degrees



Ultra High Performance Antennas Antenna Inputs: CPR229G and PDR40

UHX UHX8-37**


8 (2.4)

1433 1434

A

–

–

3

2

36.8

37.4

37.6

2.4

33

66

1.06 (30.7)

UHX10-37** 10 (3.0)

1436 1435

A

–

–

3

2

38.5

39.1

39.5

1.8

33

67

1.06 (30.7)

UHX12-37** 12 (3.7)

1437 1438

A

–

–

3

2

40.4

41.0

41.2

1.5

33

73

1.06 (30.7)

UHX15-37** 15 (4.6)

1439 1440

A

–

–

3

2

42.1

42.7

43.1

1.2

33

73

1.06 (30.7)

PXL PL

Standard Antennas – Dual Polarized Antenna Inputs: CPR229G and PDR40

PXL10-37**

10 (3.0)

2411

B

–

–

–

–

38.7

39.3

39.8

1.8

30

45

1.06 (307)

PXL12-37**

12 (3.7)

2413

B

–

–

1

2

40.4

41.0

41.1

1.5

30

48

1.06 (30.7)

PXL15-37**

15 (4.6)

2415

B

–

–

–

–

42.1

42.7

43.0

1.2

30

52

1.06 (30.7)

Standard Antennas – Single Polarized Antenna Inputs: CPR229G and PDR40 PL6-37**

6 (1.8)

2402

–

–

–

–

–

34.5

35.0

35.5

3.0

30

40

1.07 (29.4)

PL8-37**

8 (2.4)

2403

–

–

–

–

–

36.7

37.3

37.8

2.4

30

42

1.06 (30.7)

PL10-37**

10 (3.0)

2405

B

–

–

–

–

38.7

39.3

39.8

1.8

30

47

1.06 (30.7)

PL12-37**

12 (3.7)

2407

B

–

–

1

2

40.4

41.0

41.5

1.5

30

50

1.06 (30.7)

PL15-37**

15 (4.6)

2408

B

–

–

1

2

42.1

42.7

43.2

1.2

30

52

1.06 (30.7)

Reference ETSI Document EN300833 for 3 to 60 GHz. *Multiband antennas are available in this frequency band. See page 93. **5 lb/in2 (35 kPa) maximum



63


Waveguide Type


Flange Type††

Super Premium Waveguide Assemblies 3.7–4.2

EWP37S

VSWR 1.06 (30.7)** CPR229G PDR40

137DET 137DEMT

CPR229G PDR40 CPR229G PDR40 CPR229G PDR40 CPR229G CPR229G

137DET – 137DET – 137DET – 137DET 137DET

CPR229G PDR40

137DE 137DEM

– –

55001-229 223306-40

– 137DEMP-3 137DEP-2 137DEMP-2 137DEP-2 137DEMP-2 – 137DEP-1

55001-229 223306-40 55001-229 223306-40 55001-229 223306-40 55001-229 55001-229

Premium Waveguide Assemblies 3.4-3.9 3.4-3.9 3.54-4.2

EWP37-34W*** EWP37-34*** EWP37-35

3.52-4.2

EWP37-35W

3.6-4.2 3.7-4.2

EWP37-36 EWP37-37

* ** *** ††

EW37

F229PC0240CA F229PH0600HA VSWR 1.08 (28.3)**

Standard Waveguide Assemblies 3.4–4.2


Pressure Window

Non-Tunable – –

F229PC0240CS F229MH0600HS F229PC0240CA F229MH0600HA F229PC0240CA F229MH0600HA F229PC0240CA F229PC0240CA VSWR 1.15 (23.1)**

55001-229 223306-40

F229PC0240CS F229MH0600HS

Contact Andrew for information on other frequency bands. VSWR max., (R.L., dB). The indicated maximum VSWR characteristics are guaranteed for factory assemblies and are typical for field assemblies. VSWR 1.10 (26.4) † “Pre-tuned” connectors are for field attachment only. “Tunable” connectors ordered with factory assemblies are factory tuned. For detailed information on mating flanges, refer to pages 214-218.


Description

Type No.


Other Accessories

Hanger Kit of 10, Recommended maximum spacing for outdoor installation is 4.5 ft (1.37 m)* 42396A-4 Hardware Kit of 10, 3/8" bolts, lock washers, nuts 3/4" (19 mm) long 31769-5 1" (25 mm) long 31769-1 Angle Adapter Kit of 10. Stainless steel 31768A Round Member Adapter Kit of 10. Stainless steel Member Diameter, in (mm) 1-2 (25-50) 31670-1 2-3 (50-75) 31670-2 3-4 (75-100) 31670-3 4-5 (100-125) 31670-4 5-6 (125-150) 31670-5 45° Adapter Kit of 10. Galvanized steel 42334 Threaded Rod Support, 3/8” rod, nuts, washers, ceiling bracket 12 in (305 mm) long, kit of 1 31771 12 in (305 mm) long, kit of 5 31771-4 24 in (610 mm) long, kit of 1 31771-9 24 in (610 mm) long, kit of 5 31771-6 Tower Standoff Kit of 10. 1 in (25 mm) standoff Member Diameter, in (mm) 0.75-1.5 (20-40) 30848-5 1.5-3.0 (40-75) 30848-4 3-4 (75-100) 30848-1 4-5 (100-125) 30848-2 5-6 (125-150) 30848-3 Tower Standoff Kit of 10. 2.5 in (60 mm) standoff Member Diameter, in (mm) 3-4 (75-100) 41108A-1 4-5 (100-125) 41108A-2 5-6 (125-150) 41108A-3

Flaring Tool Kit for connector attachment Splice Grounding Kit with factory attached, one-hole lug Grounding Kit with factory attached, two-hole lug Grounding Kit with field attachable crimp-on, one-hole lug Grounding Kit with field attachable crimp-on, two-hole lug Grounding Kit with field attachable screw-on lug Crimping Tool to field attach lug to Grounding Kit Hoisting Grip Bending Tool Kit. One each E and H Plane tool Connector Reattachment Kit Wall-Roof Feed Thru Waveguide Boot for Plates (below), 4 in (102 mm) dia. 5 in (127 mm) dia

*

64

Type No.

205869 134DZ 204989-5 241088-5 204989-25 241088-10 204989-35 207270 31535 33586-3 33544-24 245314-37 WGB4-37 WGB5-37


For 4 in Boots

For 5 in Boots

1 1 2 3 4 6 8

204673-1 204673-2 – – 204673-4 – 204673-8

48940-1 – 48940-2 48940-3 48940-4 48940-6 –

Standard conditions: 125 mph (200 km/h) survival wind velocity, 0.5 in (13 mm) radial ice. For other conditions see page 196.


Refer to page 66 for Elliptical Waveguide ordering information 4.4 - 5.0 GHz* Antenna Inputs. All antenna VSWR values are specified with CPR and PDR flanges. Other optional flanges may result in equal or slightly higher VSWR. Contact Andrew for details. Pressurization. Feeds are pressurizable to 10 lb/in2 (70 kPa) except LBX 5 lb/in2 (35 kPa).

Type Number

Diameter ft (m)


Low

Gain, dBi Mid-Band

Top

Beamwidth Degrees



High Performance Antennas – Super High Cross Polarization Discrimination Antenna Inputs: CPR187G and PDR48

HSX HSX6-44

6 (1.8)

2398 2400

–

–

–

3

2

35.7

36.3

36.8

2.6

40

68

1.06 (30.7)

HSX8-44

8 (2.4)

2406 2404

–

–

–

3

2

38.2

38.8

39.3

1.9

40

70

1.06 (30.7)

HSX10-44

10 (3.0)

2410 2412

–

–

–

3

2

40.0

40.6

41.1

1.5

40

71

1.06 (30.7)

HSX12-44

12 (3.7)

2414 2416

–

–

–

3

2

41.7

42.2

42.8

1.2

40

74

1.06 (30.7)

HSX15-44

15 (4.6)

2420 2418

–

–

–

2

2

43.7

44.3

44.8

1.0

40

75

1.06 (30.7)

HPX HP

High Performance Antennas – Dual Polarized Antenna Inputs: CPR187G, PDR48, and UG-148C/U

HPX6-44

6 (1.8)

2558

–

–

–

2

2

35.8

36.3

36.8

2.5

30

60

1.06 (30.7)

HPX8-44

8 (2.4)

2544

–

–

–

2

2

38.6

39.1

39.7

1.8

30

64

1.06 (30.7)

HPX10-44

10 (3.0)

2546

–

–

–

2

2

39.8

40.3

40.9

1.5

30

66

1.06 (30.7)

HPX12-44

12 (3.7)

2548

–

–

–

2

2

41.9

42.5

43.0

1.2

30

67

1.06 (30.7)

High Performance Antennas –Single Polarized Antenna Inputs: CPR187G, PDR48, and UG-148C/U HP4-44

4 (1.2)

2523

–

–

–

2

2

30.0

32.6

33.1

3.8

30

56

1.10 (26.4)

HP6-44

6 (1.8)

2524

–

–

–

2

2

36.0

36.6

37.1

2.5

30

62

1.06 (30.7)

HP8-44

8 (2.4)

2527

–

–

–

2

2

38.7

39.3

39.8

1.8

30

65

1.06 (30.7)

HP10-44

10 (3.0)

2528

–

–

–

2

2

40.4

41.0

41.5

1.5

30

67

1.06 (30.7)

HP12-44

12 (3.7)

2540

–

–

–

2

2

42.1

42.7

43.2

1.2

30

67

1.06 (30.7)

HP15-44

15 (4.6)

2530

–

–

–

2

2

44.0

44.5

45.0

1.0

30

68

1.06 (30.7)

PXL PL

Standard Antennas – Dual Polarized Antenna Inputs: CPR187G, PDR48, and UG-148C/U

PXL4-44

4 (1.2)

2495

–

–

–

–

–

32.3

32.7

33.1

3.7

30

40

1.08 (28.3)

PXL6-44

6 (1.8)

2496

–

–

–

–

–

35.9

36.4

36.9

2.5

30

43

1.06 (30.7)

PXL8-44

8 (2.4)

2497

–

–

–

–

–

38.6

39.2

39.7

1.8

30

45

1.06 (30.7)

PXL10-44

10 (3.0)

2498

–

–

–

1

2

40.3

40.9

41.2

1.5

30

50

1.06 (30.7)

PXL12-44

12 (3.7)

2499

–

–

–

1

2

42.0

42.6

43.1

1.2

30

51

1.06 (30.7)

Standard Antennas – Single Polarized Antenna Inputs: CPR187G, PDR48, and UG-148C/U PL4-44

4 (1.2)

2551

–

–

–

–

–

32.4

33.0

33.5

3.7

30

40

1.08 (28.3)

PL6-44

6 (1.8)

2552

–

–

–

1

2

36.0

36.6

37.1

2.5

30

44

1.06 (30.7)

PL8-44

8 (2.4)

2553

–

–

–

–

–

38.7

39.3

39.8

1.8

30

45

1.06 (30.7)

PL10-44

10 (3.0)

2554

–

–

–

1

2

40.4

41.0

41.5

1.5

30

49

1.06 (30.7)

PL12-44

12 (3.7)

2556

–

–

–

–

–

42.1

42.7

43.2

1.2

30

50

1.06 (30.7)

PL15-44

15 (4.6)

2557

–

–

–

–

–

44.0

44.5

45.0

1.0

29

51

1.06 (30.7)

1.09 (27.3)

Low Back Lobe Antennas – Dual Polarized Antenna Input: CPR187G

LBX

Regulatory Compliance*** LBX6-44**

6 (1.8)

0806-1

B

35.8

36.4

36.9

2.5

33

52

LBX8-44**

8 (2.4)

0647-3

B

38.6

39.2

39.7

1.8

33

56

1.08 (28.3)

LBX10-44**

10 (3.0)

0912

B

40.1

40.7

41.2

1.5

33

62

1.08 (28.3)

LBX12-44**

12 (3.7)

0910

B

42.0

42.6

43.1

1.2

33

64

1.08 (28.3)

Reference ETSI Document EN300833 for 3 to 60 GHz. *Multiband antennas are available in this frequency band. See pages 93-94. **5 lb/in2 (35 kPa) maximum ***ANATEL Brazilian Telecommunications Agency, Regulation 1286 Category



65


Waveguide Type


Flange Type††


Pressure Window

Premium Waveguide Assemblies 4.4–5.0

VSWR 1.07 (29.4)**

EWP43

UG-149/U††† CPR187G PDR48 PAR48

143DCT 143DET – –

143SC 143SE 143SEM 143SCM

55000A-187 55001-187 223306-48


– – – –


223306-48 55001-187

F187PA0240BA F187PA0240CA F187MH0600HA1


VSWR 1.15 (23.1)**

EW43

F187MH0600HS F187PA0240CS

*Contact Andrew for information on other frequency bands. ** VSWR max., (R.L., dB). Up to 300 ft (90 m). The indicated maximum VSWR characteristics are guaranteed for factory assemblies and are typical for field assemblies. † “Pre-tuned” connectors are for field attachment only. “Tunable” connectors ordered with factory assemblies are factory tuned. †† For detailed information on mating flanges, refer to pages 214-218. ††† Modified cover flange with gasket groove. Mates with UG choke or cover flanges.


Type No.

Description

Type No.



Hanger Kit of 10, Recommended maximum spacing for outdoor installation is 4 ft (1.22 m)* 42396A-16 Hardware Kit of 10, 3/8" bolts, lock washers, nuts 3/4" (19 mm) long 31769-5 1" (25 mm) long 31769-1 Angle Adapter Kit of 10. Stainless steel 31768A Round Member Adapter Kit of 10. Stainless steel Member Diameter, in (mm) 1-2 (25-50) 31670-1 2-3 (50-75) 31670-2 3-4 (75-100) 31670-3 4-5 (100-125) 31670-4 5-6 (125-150) 31670-5 45° Adapter Kit of 10. Galvanized steel 42334 Threaded Rod Support, 3/8” rod, nuts, washers, ceiling bracket 12 in (305 mm) long, kit of 1 31771 12 in (305 mm) long, kit of 5 31771-4 24 in (610 mm) long, kit of 1 31771-9 24 in (610 mm) long, kit of 5 31771-6 Tower Standoff Kit of 10. 1 in (25 mm) standoff Member Diameter, in (mm) 0.75-1.5 (20-40) 30848-5 1.5-3.0 (40-75) 30848-4 3-4 (75-100) 30848-1 4-5 (100-125) 30848-2 5-6 (125-150) 30848-3

Tower Standoff Kit of 10. 2.5 in (60 mm) standoff Member Diameter, in (mm) 3-4 (75-100) 4-5 (100-125) 5-6 (125-150) Other Accessories Flaring Tool Kit for connector attachment Splice Grounding Kit with factory attached, one-hole lug Grounding Kit with field attachable crimp-on, one-hole lug Crimping Tool to field attach lug to Grounding Kit Hoisting Grip Bending Tool Kit. One each E and H Plane tool Connector Reattachment Kit Wall-Roof Feed Thru Waveguide Boot for Plates (below), 4 in (102 mm) dia. 5 in (127 mm) dia.

EWFTK-43 134DZ 204989-10 204989-28 207270 31535 33586-3 33544-45 245314-43 WGB4-43 WGB5-43

Feed-Thru Plate for Boots (above)

* Standard conditions: 125 mph (200 km/h) survival wind velocity, 0.5 in (13 mm) radial ice. For other conditions see page 196.

NEW!

41108A-1 41108A-2 41108A-3

Openings

For 4 in Boots

1 1 4 8

204673-1 204673-2 204673-4 204673-8

5.25 - 5.85 GHz

Antenna Inputs. The standard connector is Type N Female. Contact Andrew for other options. Pressurization. Pressurization not required.

Type Number FPA

66

Side Dimension in (mm)

Gain, dBi Mid-Band

Beamwidth, degrees Mid-Band

F/B Ratio dB

VSWR max. (R.L., dB)

Flat Panel Array Antennas – Single Polarized Antenna Inputs: Type N Female

FPA5250D06-N

6 (150)

18.0

19.3

35

1.50 (14.0)

FPA5250D12-N

12 (300)

23.6

9.6

40

1.50 (14.0)

FPA5250D24-N

24 (600)

28.2

4.8

45

1.50 (14.0)


Refer to page 71 for Elliptical Waveguide ordering information 5.25 - 5.85 GHz Antenna Inputs. All antenna VSWR values are specified with Type N Female connectors. Other optional inputs may result in equal or slightly VSWR. Contact Andrew for details. Pressurization. Pressurization not required.

Type Number

Low

Gain, dBi Mid-Band

Top

Beamwidth Degrees



Unlicensed Radios Including Spread Spectrum, NII, and ISM – Single and Dual Polarized Antenna Input: Type N Female

P, PX P2F-52 PX2F-52 P3F-52 PX3F-52


Diameter ft (m)

2 (0.6) 2 (0.6) 3 (0.9) 3 (0.9)

4528 4528 4529 4529

– – – –

– – – –

– – – –

– – – –

– – – –

29.0 29.0 33.4 33.4

29.4 29.4 33.4 33.4

30.1 30.1 33.5 33.5

5.4 5.4 3.8 3.8

30 30 30 30

41 41 42 42

1.50 (14.0) 1.50 (14.0) 1.50 (14.0) 1.50 (14.0)


Type Number

Diameter ft (m)

10 (3.0) 12 (3.7)

1636, 1637 1638, 1639

Top

Beamwidth Degrees



– –

– –

– –

– –

– –

42.5 44.0

42.9 44.5

43.3 44.9

1.1 0.9

36 36

72 73

1.06 (30.7) 1.06 (30.7)

2 2 2

40.5 42.0 43.8

41.0 42.5 44.2

41.4 42.9 44.7

1.6 1.4 1.0

30 30 30

68 69 71

1.06 (30.7) 1.06 (30.7) 1.06 (30.7)


HPX HPX8-56 HPX10-56 HPX12-56

Low

Gain, dBi Mid-Band

Ultra High Performance Antennas – Dual Polarization Antenna Inputs: CPR137G and PDR70

UHX UHX10-56 UHX12-56


8 (2.4) 10 (3.0) 12 (3.7)

1025 1027 1030

B B A

– – –

– – –

3 2 3

5.725 - 6.425 GHz Antenna Inputs. All antenna VSWR values are specified with CPR and PDR flanges. Other optional flanges may result in equal or slightly higher VSWR. Contact Andrew for details. Pressurization. Feeds are pressurizable to 10 lb/in2 (70 kPa).

Type Number

Diameter ft (m)

4 (1.2) 6 (1.8) 8 (2.4) 10 (3.0) 12 (3.7) 15 (4.6)

Top

Beamwidth Degrees



4269 4444 4452 4460 4468 4476

– – B A A A

– – – – – –

– – – – – –

1 – 2 2 2 2

2 – 2 2 2 2

34.6 38.0 40.7 42.5 44.2 45.9

35.0 38.5 41.2 42.9 44.6 46.4

35.4 39.0 41.7 43.4 45.0 46.8

2.9 2.0 1.6 1.3 1.0 0.8

30 30 30 30 30 30

52 60 64 65 70 70

1.10 (26.4) 1.06 (30.7) 1.06 (30.7) 1.06 (30.7) 1.06 (30.7) 1.06 (30.7)

5.8 2.9 2.0 1.6 1.3 1.0 0.8

30 30 30 30 30 30 30

40 40 45 47 50 51 57

1.10 (26.4) 1.10 (26.4) 1.06 (30.7) 1.06 (30.7) 1.06 (30.7) 1.06 (30.7) 1.06 (30.7)

Standard/Wide Band Antennas – Single Polarized Standard and Low VSWR Antenna Inputs: CPR137G, PDR70, and Type N Female

PL P2-57W P4-57W PL6-57W PL8-57W PL10-57W PL12-57W PL15-57W

Low

Gain, dBi Mid-Band

High Performance / Wide Band Antennas – Single Polarization Antenna Inputs: CPR137G and PDR70

HP HP4-57W HP6-57W HP8-57W HP10-57W HP12-57W HP15-57W


2 (0.6) 4 (1.2) 6 (1.8) 8 (2.4) 10 (3.0) 12 (3.7) 15 (4.6)

2892 4268 4448 4456 4464 4472 4480

– – B B B B B

– – – – – – –

– – – – – – –

– – 1 1 1 1 1

– – 2 2 2 2 2

29.2 34.6 38.0 40.7 42.5 44.2 46.0

29.3 35.0 38.5 41.2 42.9 44.6 46.5

29.9 35.4 39.0 41.7 43.4 45.0 47.0

Reference ETSI Document EN300833 for 3 to 60 GHz. *Multiband antennas are available in this frequency band. See pages 93-94.



67

Refer to page 71 for Elliptical Waveguide ordering information 5.850 - 5.915, 6.425 - 6.930 GHz Antenna Inputs. All antenna VSWR values are specified with CPR and PDR flanges. Other optional flanges may result in equal or slightly higher VSWR. Contact Andrew for details. Pressurization. Feeds are pressurizable to 10 lb/in2 (70 kPa).

Type Number

Regulatory Compliance Diameter RPE U.S. FCC ETSI ETSI ft (m) Number(s) 101 74 78 Class Gain

Low

Gain, dBi Mid-Band

Top

Beamwidth Degrees



Ultra High Performance/Wide Band Antennas – Dual Polarized Antenna Inputs: CPR137G and PDR70

UHX UHX8-58W 5.850-5.915 GHz** 8 (2.4) 6.425-6.930 GHz***

3755 3759 3772 3747

A A

– –

– –

3 –

2 –

40.4 41.5

40.5 41.8

40.6 42.1

1.45 1.3

34 34

68 70

1.08 (28.3) 1.08 (28.3)

5.850-5.915 GHz**10 (3.0) 3757 3759 6.425-6.930 GHz*** 3774 3776

A –

– –

– –

3 –

2 –

42.0 43.0

42.1 43.2

42.2 43.4

1.25 1.15

34 34

71 73

1.08 (28.3) 1.08 (28.3)

UHX10-58W

High Performance/Wide Band Antennas – Dual Polarized Antenna Inputs: CPR137G and PDR70

HPX HPX8-58W 5.850-5.915 GHz** 8 (2.4) 6.425-6.930 GHz***

3761 3749

– –

– –

– –

3 –

2 –

40.7 41.7

40.8 41.9

40.9 42.2

1.4 1.4

32 34

65 67

1.08 (28.3) 1.08 (28.3)

3751 3770

– –

– –

– –

2 –

2 –

42.6 43.4

42.7 43.4

42.8 43.8

1.2 1.2

32 34

68 69

1.08 (28.3) 1.08 (28.3)

HPX10-58W 5.850-5.915 GHz**10 (3.0) 6.425-6.930***

5.925 - 6.425 GHz* Antenna Inputs. All antenna VSWR values are specified with CPR and PDR flanges. Other optional flanges may result in equal or slightly higher VSWR. Contact Andrew for details. Pressurization. Feeds are pressurizable to 10 lb/in2 (70 k Pa) except LBX Series 8 lb/in2 (56 kPa).

Type Number

Diameter ft (m)


Top

Beamwidth Degrees




UHX UHX6-59

6 (1.8)

1730 1729

A

–

–

3

2

38.4

38.8

39.1

1.8

33

75

1.06 (30.7)

UHX8-59

8 (2.4)

1654 1653

A

–

–

3

2

40.9

41.3

41.6

1.4

33

77

1.06 (30.7)

UHX10-59

10 (3.0)

1667 1666

A

–

–

3

2

42.9

43.2

43.6

1.1

34

80

1.06 (30.7)

UHX12-59

12 (3.7)

1665 1664

A

–

–

3

2

44.4

44.8

45.2

0.9

35

80

1.06 (30.7)

UHX15-59

15 (4.6)

1662 1661

A

–

–

3

2

46.1

46.4

46.8

0.8

34

80

1.06 (30.7)

High Performance Antennas, Super High Cross Polarization Discrimination Dual Polarized – TEGLAR Long Life Radome Included Antenna Inputs: CPR137G and PDR70

HSX HSX6-59

6 (1.8)

2424 2422

B

–

–

3

2

38.4

38.8

39.1

1.8

40

72

1.07 (29.4)

HSX8-59

8 (2.4)

2428 2429

A

–

–

3

2

40.9

41.3

41.6

1.4

40

74

1.08 (28.3)

HSX10-59

10 (3.0)

2442 2440

A

–

–

3

2

42.5

42.9

43.2

1.1

40

76

1.08 (28.3)

HSX12-59

12 (3.7)

2444 2446

A

–

–

3

2

44.4

44.7

45.0

0.9

40

78

1.08 (28.3)

HSX15-59

15 (4.6)

2450 2448

A

–

–

3

2

46.3

46.6

46.9

0.8

40

79

1.08 (28.3)

HPX HP

High Performance Antennas – Dual Polarized – Hypalon Radome Included Antenna Inputs: CPR137G and PDR70

HPX6-59

6 (1.8)

2664

B

–

–

3

2

38.4

38.8

39.1

1.8

30

65

1.07 (29.4)

HPX8-59

8 (2.4)

2678

A

–

–

3

2

40.9

41.3

41.6

1.4

30

69

1.06 (30.7)

HPX10-59

10 (3.0)

2684

A

–

–

2

2

42.7

43.1

43.5

1.1

30

71

1.06 (30.7)

HPX12-59

12 (3.7)

2682

A

–

–

2

2

44.4

44.8

45.2

0.9

30

71

1.06 (30.7)

HPX15-59

15 (4.6)

2683

A

–

–

2

2

46.1

46.4

46.8

0.8

30

71

1.06 (30.7)

Reference ETSI Document EN300833 for 3 to 60 GHz * Multiband antennas are available in this frequency band. See pages 93-94. ** Meets Canadian DOC GL-34 Specification *** Meets Canadian DOC SRSP 306.4 Issue #3 Specification

68

Low

Gain, dBi Mid-Band

Continued on next page


Refer to page 71 for Elliptical Waveguide ordering information 5.925 - 6.425 GHz* Type Number

Diameter ft (m)

HP HP6-59 HP8-59 HP10-59 HP12-59 HP15-59

6 (1.8) 8 (2.4) 10 (3.0) 12 (3.7) 15 (4.6)

Top

Beamwidth Degrees


1.8 1.4 1.1 0.9 0.8

30 30 30 30 30


4446 4454 4462 4470 4478

A A A A A

– – – – –

– – – – –

2 2 2 2 2

2 2 2 2 2

38.2 41.1 42.6 44.7 46.2

38.6 41.5 42.9 45.0 46.5

39.0 41.9 43.1 45.2 46.8

62 66 69 71 71

1.06 (30.7) 1.06 (30.7) 1.06 (30.7) 1.06 (30.7) 1.06 (30.7)

High Performance, Dual Beam Antennas Dual Polarized - TEGLAR Long Life Radome Included – Dual Polarized Antenna Inputs: CPR137G and PDR70

HDX8-59

8 (2.4)

HDX10-59

10 (3.0)

HDX12-59

12 (3.7)

PARX PAR

1750 1751 1752 1753 1758 1759 1760 1761 1766 1767 1768 1769

A

–

–

2/3

2

41.2

41.5

41.8

1.4

26

73

1.06 (30.7)

A

–

–

3

2

42.9

43.2

43.4

1.1

26

74

1.06 (30.7)

A

–

–

3

2

44.6

45.0

45.4

1.0

26

75

1.06 (30.7)

Standard Antennas - Similar to PL()-59 Series, Except Meet Category A – Dual Polarized Antenna Inputs: CPR137G and PDR70

PARX6-59** PARX8-59** PARX10-59 PARX12-59

6 (1.8) 8 (2.4) 10 (3.0) 12 (3.7)

PAR6-59** PAR8-59** PAR10-59 PAR12-59

6 (1.8) 8 (2.4) 10 (3.0) 12 (3.7)

PXL PL

4377 A – – 1 2 4378 A – – 1 2 4379 A – – 1 2 4380 A – – 1 2 Standard Antennas - Single Polarized Antenna Inputs: CPR137G, PDR70, and UG-343B/U 2472 A – – 1 2 2517 A – – 1 2 1649 A – – 1 2 2366 A – – 1 2

37.8 40.4 42.7 43.3

37.9 40.7 43.1 44.7

38.2 40.9 43.3 45.1

1.9 1.4 1.1 0.9

30 30 35 34

60 60 60 60

1.08 (28.3) 1.08 (28.3) 1.06 (30.7) 1.06 (30.7)

38.0 40.4 43.0 44.2

38.2 40.8 43.2 44.6

38.4 41.0 43.4 44.9

1.9 1.4 1.1 0.9

30 30 30 30

55 58 62 63

1.06 (30.7) 1.06 (30.7) 1.06 (30.7) 1.06 (30.7)

38.4 40.9 42.7 44.4 46.1

38.7 41.3 43.1 44.8 46.4

39.1 41.6 43.5 45.2 46.8

1.8 1.4 1.1 0.9 0.8

30 30 30 30 30

46 48 49 53 54

1.07 (29.4) 1.06 (30.7) 1.06 (30.7) 1.06 (30.7) 1.06 (30.7)

35.0 38.7 41.2 42.9 44.7 46.3

35.4 39.1 41.6 43.3 45.0 46.7

35.7 39.5 42.0 43.6 45.2 47.7

2.7 1.8 1.4 1.1 0.9 0.8

30 30 30 30 30 30

41 46 48 51 52 53

1.08 (28.3) 1.06 (30.7) 1.06 (30.7) 1.06 (30.7) 1.06 (30.7) 1.06 (30.7)

– 2 –

40.1 42.3 44.0

40.4 42.6 44.4

40.6 42.7 44.5

1.4 1.1 0.9

27 28 28

64 66 68

1.07 (29.4) 1.06 (30.7) 1.06 (30.7)

2 2 2

40.3 42.5 44.2

40.6 42.8 44.6

40.8 42.9 44.7

1.4 1.1 0.9

28 28 28

64 66 68

1.06 (30.7) 1.04 (34.2) 1.04 (34.2)

Standard Antennas – Dual Polarized Antenna Inputs: CPR137G, PDR70, and UG-343B/U

PXL6-59 PXL8-59 PXL10-59 PXL12-59 PXL15-59

6 (1.8) 8 (2.4) 10 (3.0) 12 (3.7) 15 (4.6)

PL4-59 PL6-59 PL8-59 PL10-59 PL12-59 PL15-59

4 (1.2) 6 (1.8) 8 (2.4) 10 (3.0) 12 (3.7) 15 (4.6)

FPX FP

FP8-59 FP10-59 FP12-59

Low

Gain, dBi Mid-Band

High Performance Antennas - Hypalon Radome Included – Single Polarized Antenna Inputs: CPR137G and PDR70

HDX

FPX8-59 FPX10-59 FPX12-59


2632 – – – 1 2 2616 B – – 1 2 2618 B – – – – 2620 B – – 1 2 2642 B – – – – Standard Antennas – Single Polarized Antenna Inputs: CPR137G, PDR70, and UG-343B/U 2602 – – – – – 4450 B – – 1 2 4458 B – – 1 2 4466 B – – – – 4474 B – – 1 2 4482 B – – 1 2 Focal Plane Antennas – Dual Polarized Antenna Inputs: CPR137G, PDR70, and UG-343B/U

8 (2.4) 10 (3.0) 12 (3.7)

6111 – – – – 6113 A – – 2 6115 – – – – Focal Plane Antennas – Single Polarized Antenna Inputs: CPR137G and PDR70 8 (2.4) 6103 A – – 1 10 (3.0) 6105 A – – 2 12 (3.7) 6107 A – – 2

Reference ETSI Document EN300833 for 3 to 60 GHz *Multiband antennas are available in this frequency range. See page 93-94.


**Uses focal plane type reflector and feed system.


69

5.925 - 6.425 GHz* Type Number

Diameter ft (m)

LBX LBX6-59*** LBX8-59*** LBX10-59*** LBX12-59***

RPE Number(s)

Regulatory Compliance**

Low

Gain, dBi Mid-Band

38.3 40.9 42.6 44.4

38.7 41.3 43.0 44.8

Top

Beamwidth Degrees


39.0 41.6 43.3 45.1

1.8 1.4 1.1 0.9

33 33 33 33


Low Back Lobe Antennas - Dual Polarized Antenna Inputs: CPR137G and PDR70 6 (1.8) 8 (2.4) 10 (3.0) 12 (3.7)

962 538-1 536-3 537-5

B B B B

54 60 65 62

1.07 (29.4) 1.06 (30.7) 1.06 (30.7) 1.06 (30.7)

5.925 - 7.125 GHz Antenna Inputs. All antenna VSWR values are specified with CPR and PDR flanges. Other optional flanges may result in equal or slightly higher VSWR. Contact Andrew for details. Pressurization. Feeds are pressurizable to 10 lb/in2 (70 k Pa).

Type Number

Diameter ft (m)

UHX UHP 6 (1.8) 8 (2.4) 10 (3.0) 12 (3.7)

UHP6-59W UHP8-59W UHP10-59W UHP12-59W

6 (1.8) 8 (2.4) 10 (3.0) 12 (3.7)

6 (1.8) 8 (2.4) 10 (3.0) 12 (3.7) 15 (4.6)



1022 3303 A A – 3 2 37.5 38.8 1115 1116 A A – 2 2 41.0 41.7 1118 1117 A A – 2 2 42.5 43.2 1119 1120 A A – 3 2 44.1 44.8 Ultra High Performance/Wide Band Antennas – Single Polarized Antenna Inputs: CPR137G and PDR70 3492 3494 B B – 3 2 38.4 39.3 3496 3506 A A – 3 2 40.9 41.9 3498 3500 A A – 3 2 42.4 43.3 3502 3508 A A 3 2 44.3 45.2

39.5 42.3 43.8 45.4

1.8 1.4 1.2 1.0

36 36 36 36

67 68 71 74

1.08 (28.3) 1.08 (28.3) 1.08 (28.3) 1.08 (28.3)

39.9 42.2 43.7 45.5

1.8 1.5 1.3 1.0

35 35 35 35

75 78 78 80

1.06 (30.7) 1.06 (30.7) 1.06 (30.7) 1.06 (30.7)

4445 4453 4461 4469 4477

– B A A A

– A A A A

– – – – –

– 2 2 2 2

– 2 2 2 2

38.2 41.0 42.6 44.3 46.2

39 41.7 43.1 45 46.9

39.8 42.5 43.8 45.7 47.6

1.8 1.5 1.2 0.9 0.8

32 35 33 32 30

66 66 69 66 71

1.06 (30.7) 1.06 (30.7) 1.06 (30.7) 1.06 (30.7) 1.06 (30.7)

37.8 40.4 42.7

38.3 40.7 43.3

38.7 40.9 44.0

1.8 1.6 1.1

30 30 35

59 60 60

1.12 (24.9) 1.10 (26.4) 1.15 (23.1)

38.0 40.4 43.0 44.2

38.7 41.0 43.4 44.9

39.0 41.6 43.8 45.7

1.8 1.4 1.1 0.9

30 30 30 30

59 58 62 63

1.08 (28.3) 1.06 (30.7) 1.06 (30.7) 1.06 (30.7)

38.7 41.2 42.7 44.6 46.3

39.5 42 45.3 45.2 47.0

40.2 42.8 43.9 45.9 47.7

1.8 1.4 1 1 0.8

35 35 33 33 30

46 51 55 60 57

1.06 (30.7) 1.06 (30.7) 1.06 (30.7) 1.06 (30.7) 1.06 (30.7)

Standard/Wide Band Antennas – Dual Polarized Antenna Inputs: CPR137G, PDR70, and UG-343B/U.

PARX PARX6-59W 6 (1.8) PARX8-59W 8 (2.4) PARX10-59W 10 (3.0)

4371 4372 4373

A A A

A A A

– – –

1 1 1

2 2 2

Standard/Wide Band Antennas – Single Polarized Antenna Inputs: CPR137G, PDR70, and UG-343B/U.

PAR 6 (1.8) 8 (2.4) 10 (3.0) 12 (3.7)

2480 2572 1279 2578

A A A A

A A A A

– – – –

1 1 1 1

2 2 2 2

Standard/Wide Band Antennas – Single Polarized Antenna Inputs: CPR137G and PDR70.

PL PL6-59W PL8-59W PL10-59W PL12-59W PL15-59W

Top

Beamwidth Degrees

High Performance/Wide Band Antennas Antenna Inputs: CPR137G and PDR70

HP

PAR6-59W PAR8-59W PAR10-59W PAR12-59W

Low

Gain, dBi Mid-Band

Ultra High Performance/Wide Band Antennas – Dual Polarized Antenna Inputs: CPR137G and PDR70

UHX6-59W UHX8-59W UHX10-59W UHX12-59W

HP6-59W HP8-59W HP10-59W HP12-59W HP15-59W


6 (1.8) 8 (2.4) 10 (3.0) 12 (3.7) 15 (4.6)

4449 4457 4465 4473 4481

B B B B B

B A B A B

– – – – –

– – – 1 1

– – – 2 2

Reference ETSI Document EN300833 for 3 to 60 GHz *Multiband antennas are available in this frequency band. See pages 93-94. **ANATEL Telecommunications Agency, Regulation 1286 Category ***8 lb/in2 (56 kPa) maximum

70


Ordering Information for Waveguide Assemblies Frequency* GHz

Waveguide Type

Connector† Tunable Fixed-Tuned

Flange Type††


EWP52S


Pressure Window

VSWR 1.05 (32.3)** CPR159G UG-344/U††† CPR137G PDR70

152DET*** 252DCT*** 252DET*** 252DEMT

– – – –

55001-159 55000A-137 55001-137 223306-70

Premium Waveguide Assemblies

F159PC0240CA F137PA0240BA F137PC0240CA F137MH0600HA VSWR 1.06 (30.7)**

5.6–6.2

EWP52-56

CPR159G UG-344/U††† CPR137G PDR70

152DET 252DCT 252DET 252DEMT

152SE – 252SE 252SEM

55001-159 55000A-137 55001-137 223306-70

F159PC0240CS F137PA0240BG F137PC0240CG F137MH0600HG

5.725–6.425

EWP52-58



152SE – 252SE 252SEM

55001-159 55000A-137 55001-137 223306-70

F159PC0240CA F137PA0240BD F137PC0240CD F137MH0600HD

5.925–6.425

EWP52-59



152SE – 252SE 252SEM

55001-159 55000A-137 55001-137 223306-70

F159PC0240CA F137PA0240BA F137PC0240CA F137MH0600HA

5.6-6.425

EWP52-56W

CPR159G CPR137G PDR70

152SE 252SE 252SEM

55001-159 55001-137 223306-70

F159PC0240CS F137PC0240CS F137MH0600HS

– – –


EW52

Non-Tunable CPR159G UG-344/U††† CPR137G

VSWR 1.15 (23.1)**

152DE 252DC 252DE

152SE – 252SEM

55001-159 55000A-137 55001-137

F159PC0240CS F137PA0240BS F137PC0240CS

* Contact Andrew for information on other frequency bands. ** VSWR max., (R.L., dB). Up to 300 ft (90 m). The indicated maximum VSWR characteristics are guaranteed for factory assemblies and are typical for field assemblies. *** 1.036 (35.0 dB) for lengths 150 ft (46 m) and shorter. † “Tunable” connectors ordered with factory assemblies are factory tuned. †† For detailed information on mating flanges, refer to pages 214-218. ††† Modified cover flange with gasket groove. Mates with UG choke or cover flanges.


Type No.

Hangers and Adapters Hanger Kit of 10, Recommended maximum spacing for outdoor installation is 3.5 ft (1.07 m)* 42396A-8 NEW! Snap-In Hanger Kit of 10. Recommended spacing for outdoor installation is 3.5 ft (1.07 m) EWSH-52 Hardware Kit of 10, 3/8" bolts, lock washers, nuts 3/4" (19 mm) long 31769-5 1" (25 mm) long 31769-1 Angle Adapter Kit of 10. Stainless steel 31768A Angle Adapter Kit of 10. Galvanized 3/8" Hardware 242774 Metric Hardware 242774-M Round Member Adapter Kit of 10. Stainless steel Member Diameter, in (mm) 1-2 (25-50) 31670-1 2-3 (50-75) 31670-2 3-4 (75-100) 31670-3 4-5 (100-125) 31670-4 5-6 (125-150) 31670-5 45° Adapter Kit of 10. Galvanized steel 42334 Threaded Rod Support, 3/8” rod, nuts, washers, ceiling bracket 12 in (305 mm) long, kit of 1 31771 12 in (305 mm) long, kit of 5 31771-4 24 in (610 mm) long, kit of 1 31771-9 24 in (610 mm) long, kit of 5 31771-6 Tower Standoff Kit of 10. 1 in (25 mm) standoff Member Diameter, in (mm) 0.75-1.5 (20-40) 30848-5 1.5-3.0 (40-75) 30848-4 3-4 (75-100) 30848-1 4-5 (100-125) 30848-2 5-6 (125-150) 30848-3 * Standard conditions: 125 mph (200 km/h) survival wind velocity, 0.5 in (13 mm) radial ice. For other conditions see page 196.


Description

Type No.

Tower Standoff Kit of 10. 2.5 in (60 mm) standoff Member Diameter, in (mm) 3-4 (75-100) 4-5 (100-125) 5-6 (125-150)

41108A-1 41108A-2 41108A-3

Other Accessories Flaring Tool Kit for connector attachment Splice Grounding Kit with factory attached, one-hole lug Grounding Kit with factory attached, two-hole lug Grounding Kit with field attachable crimp-on, one-hole lug Grounding Kit with field attachable crimp-on, two-hole lug Grounding Kit with field attachable screw-on lug Crimping Tool to field attach lug to Grounding Kit Hoisting Grip Bending Tool Kit. One each E and H Plane tool Connector Reattachment Kit Wall-Roof Feed Thru Waveguide Boot for Plates (below), 4 in (102 mm) dia. 5 in (127 mm) dia

EWFTK-52 152DZ 204989-4 241088-4 204989-24 241088-9 204989-34 207270 24312A 33586-7 33544-38 245314-52 WGB4-52 WGB5-52


For 4 in Boots

For 5 in Boots

1 1 2 3 4 6 8

204673-1 204673-2 – – 204673-4 – 204673-8

48940-1 – 48940-2 48940-3 48940-4 48940-6 –


71


6.425 - 7.125 GHz, Dual Beam Antennas Antenna Inputs. All antenna VSWR values are specified with CPR flange. Other optional flanges may result in equal or slightly higher VSWR. Contact Andrew for details. Pressurization. Feeds are pressurizable to 10 lb/in2 (70 kPa).

Type Number

Diameter ft (m)

HDH HDV


Low

Gain, dBi Mid-Band

Top

Beamwidth Degrees



High Performance Dual-Beam (Angle Diversity) Antennas - Hypalon Radome Included – Horizontal Polarization Antenna Input: CPR137G

HDH6-65

6 (1.8)

1884 1885

B

B

–

–

–

39.4

39.7

40.0

1.9

30

60

1.08 (28.3)

HDH8-65

8 (2.4)

1893 1892

B

A

–

–

–

42.1

42.4

42.7

1.5

30

65

1.06 (30.7)

HDH10-65

10 (3.0)

1900 1901

B

A

–

–

–

43.6

43.9

44.2

1.2

26

66

1.06 (30.7)

HDH12-65

12 (3.7)

1908 1909

A

A

–

–

–

45.0

45.3

45.6

0.9

30

70

1.06 (30.7)

High Performance Dual-Beam (Angle Diversity) Antennas - Hypalon Radome Included – Vertical Polarization Antenna Input: CPR137G HDV6-65

6 (1.8)

1880 1881

B

B

–

–

–

39.4

39.7

40.0

1.9

29

65

1.08 (28.3)

HDV8-65

8 (2.4)

1888 1889

B

A

–

–

–

42.1

42.4

42.7

1.5

30

62

1.06 (30.7)

HDV10-65

10 (3.0)

1896 1897

B

A

–

–

–

43.6

43.9

44.2

1.2

30

66

1.06 (30.7)

HDV12-65

12 (3.7)

1904 1905

A

A

–

–

–

45.0

45.3

45.6

0.9

30

67

1.06 (30.7)

PDH PDV PDH6-65

Standard, Dual-Beam (Angle Diversity) Antennas – Horizontal Polarization Antenna Input: CPR137G 6 (1.8)

1778 1779

–

–

–

–

–

39.4

39.7

40.0

1.9

30

46

1.08 (28.3)

PDH8-65

8 (2.4)

1786 1787

B

B

–

–

–

42.1

42.4

42.7

1.5

30

55

1.06 (30.7)

PDH10-65

10 (3.0)

1794 1795

B

A

–

–

–

43.6

43.9

44.2

1.2

30

60

1.06 (30.7)

PDH12-65

12 (3.7)

1743 1744

A

A

–

–

–

45.0

45.3

45.6

0.9

30

53

1.06 (30.7)

Standard, Dual-Beam (Angle Diversity) Antennas – Vertical Polarization Antenna Input: CPR137G PDV6-65

6 (1.8)

1774 1775

–

–

–

–

–

39.4

39.7

40.0

1.9

29

54

1.08 (28.3)

PDV8-65

8 (2.4)

1782 1783

B

B

–

–

–

42.1

42.4

42.7

1.5

30

55

1.06 (30.7)

PDV10-65

10 (3.0)

1790 1791

B

A

–

–

–

43.6

43.9

44.2

1.2

30

60

1.06 (30.7)

PDV12-65

12 (3.7)

1739 1740

A

A

–

–

–

45.0

45.3

45.6

0.9

30

60

1.06 (30.7)

Standard, Dual-Beam (Angle Diversity) Antennas – Vertical/Horizontal, Sum and Difference Mode Antenna Input: CPR137G PDH8S-65

8 (2.4)

1788 1789

–

–

–

–

–

40.0

39.8

39.8

1.3

30

51

1.08 (28.3)

PDV8S-65

8 (2.4)

1784 1785

–

–

–

–

–

40.0

39.8

39.8

1.3

30

57

1.06 (30.7)


72




Type Number

Diameter ft (m)


Low

Gain, dBi Mid-Band

Top

Beamwidth Degrees



Ultra High Performance Antennas - TEGLAR Long Life Radome Included – Dual Polarized Antenna Inputs: CPR137G and PDR70

UHX UHX6-65

6 (1.8)

1717 1718

A

A

–

3

2

39.1

39.5

40.0

1.7

30

70

1.06 (30.7)

UHX8-65

8 (2.4)

2581 2584

A

A

–

3

2

41.6

42.0

42.4

1.3

30

76

1.06 (30.7)

UHX10-65

10 (3.0)

2582 2583

A

A

–

3

2

43.6

44.0

44.4

1.0

32

80

1.06 (30.7)

UHX12-65

12 (3.7)

1715 1716

A

A

–

3

2

45.2

45.7

46.1

0.9

38

78

1.06 (30.7)

UHX15-65

15 (4.6)

1709 1710

A

A

–

2

2

46.6

46.9

47.3

0.7

30

75

1.06 (30.7)


HSX HSX6-64

6 (1.8)

2454 2452

A

A

–

3

2

39.1

39.6

40.0

1.7

40

70

1.07 (29.4)

HSX8-64

8 (2.4)

2456 2458

A

A

–

3

2

41.6

42.0

42.4

1.3

40

75

1.06 (30.7)

HSX10-64

10 (3.0)

2461 2459

A

A

–

3

2

43.2

43.6

44.0

1.0

40

77

1.06 (30.7)

HSX12-64

12 (3.7)

2470 2471

A

A

–

3

2

45.2

45.7

46.1

0.8

40

78

1.06 (30.7)

HSX15-64

15 (4.6)

2488 2486

A

A

–

3

2

46.9

47.4

47.8

0.7

40

79

1.06 (30.7)


HPX HPX4-65

4 (1.2)

2649

–

–

–

1

2

35.4

35.9

36.3

2.7

30

58

1.08 (28.3)

HPX6-65

6 (1.8)

2794

B

B

–

2

2

39.1

39.5

39.9

1.7

30

64

1.07 (29.4)

HPX8-65

8 (2.4)

2654

A

A

–

2

2

41.6

42.0

42.4

1.3

34

68

1.06 (30.7)

HPX10-65

10 (3.0)

2655

A

A

–

3

2

43.6

44.0

44.4

1.0

34

70

1.06 (30.7)

HPX12-65

12 (3.7)

2656

A

A

–

2

2

45.0

45.4

45.9

0.8

30

71

1.06 (30.7)

HPX15-65

15 (4.6)

2657

A

A

–

2

2

46.6

46.9

47.3

0.7

30

71

1.06 (30.7)

High Performance Antennas – Single Polarized Antenna Inputs: CPR137G and PDR70 HP4-65

4 (1.2)

1081

–

–

–

2

2

35.5

36.0

36.4

2.7

30

58

1.08 (28.3)

HP6-65

6 (1.8)

4447

B

B

–

–

–

39.0

39.5

39.8

1.7

30

64

1.06 (30.7)

HP8-65

8 (2.4)

4455

A

A

–

2

2

41.9

42.3

42.8

1.3

30

66

1.06 (30.7)

HP10-65

10 (3.0)

4463

A

–

–

2

2

43.1

43.4

43.8

1.0

27

70

1.06 (30.7)

HP12-65

12 (3.7)

4471

A

A

–

2

2

45.2

45.6

46.1

0.8

30

71

1.06 (30.7)

HP15-65

15 (4.6)

4479

A

A

–

2

2

46.8

47.2

47.6

0.7

30

71

1.06 (30.7)

PARX PAR PARX6-65

Standard Antennas – Dual Polarized Antenna Inputs: CPR137G, PDR70, and UG-343B/U 6 (1.8)

4381

A

A

–

1

2

38.2

38.4

38.7

1.8

30

59

1.08 (28.3)

PARX8-65

8 (2.4)

4382

A

A

–

1

2

40.9

41.2

41.3

1.3

30

60

1.08 (28.3)

PARX10-65

10 (3.0)

4383

A

A

–

1

2

43.3

43.6

44.0

1.1

35

60

1.06 (30.7)

PARX12-65

12 (3.7)

4384

A

A

–

1

2

45.1

45.5

45.9

0.9

35

60

1.06 (30.7)

Standard Antennas – Single Polarized Antenna Inputs: CPR137G, PDR70, and UG-343B/U PAR6-65

6 (1.8)

1290

A

B

–

2

2

38.7

38.8

39.0

1.8

30

59

1.06 (30.7)

PAR8-65

8 (2.4)

2570

A

A

–

1

2

41.0

40.8

41.0

1.3

30

60

1.06 (30.7)

PAR10-65

10 (3.0)

1257

A

A

–

1

2

43.4

43.6

43.8

1.0

30

63

1.06 (30.7)

PAR12-65

12 (3.7)

2430

A

A

–

1

2

44.9

45.3

45.5

0.8

30

64

1.06 (30.7)


Reference ETSI Document EN300833 for 3 to 60 GHz * Multiband antennas available in this frequency band. See pages 93-94.



73

6.425 - 7.125 GHz* Antenna Inputs. All antenna VSWR values are specified with CPR and PDR flanges. Other optional flanges may result in equal or slightly higher VSWR. Contact Andrew for details. Pressurization. Feeds are pressurizable to 10 lb/in2 (70 kPa), except LBX Series 8 lb/in2 (56 kPa).

Type Number

Diameter ft (m)

PXL PL


Low

Gain, dBi Mid-Band

Top

Beamwidth Degrees



Standard Antennas – Dual Polarized Antenna Input: CPR137G, PDR70, and UG-343B/U

PXL6-65

6 (1.8)

2634

B

B

–

–

–

39.1

39.4

39.9

1.7

30

47

1.07 (29.41)

PXL8-65

8 (2.4)

2636

B

B

–

–

–

41.6

42.0

42.4

1.3

34

52

1.06 (30.7)

PXL10-65

10 (3.0)

2683

A

A

–

1

2

43.6

44.0

44.4

1.0

34

58

1.06 (30.7)

PXL12-65

12 (3.7)

2641

A

A

–

1

2

45.0

45.4

45.9

0.8

30

62

1.06 (30.7)

PXL15-65

15 (4.6)

2640

B

B

–

–

–

46.6

46.9

47.3

0.7

30

59

1.06 (30.7)

Standard Antennas – Single Polarized Antenna Input: CPR137G, PDR70, and UG-343B/U PL4-65

4 (1.2)

2622

B

–

–

–

–

35.8

36.3

36.7

2.5

30

43

1.08 (28.3)

PL6-65

6 (1.8)

4451

B

B

–

–

–

39.5

39.9

40.2

1.7

30

47

1.06 (30.7)

PL8-65

8 (2.4)

4459

B

B

–

–

–

42.0

42.4

42.8

1.3

30

49

1.06 (30.7)

PL10-65

10 (3.0)

4467

B

A

–

–

–

43.6

43.9

44.3

1.0

30

52

1.06 (30.7)

PL12-65

12 (3.7)

4475

B

–

–

1

2

45.2

45.6

46.1

0.8

30

53

1.06 (30.7)

PL15-65

15 (4.6)

4483

B

B

–

1

2

47.0

47.4

47.7

0.7

30

54

1.06 (30.7)

FPX FP

Focal Plane Antennas – Dual Polarized Antenna Input: CPR137G and PDR70

FPX6-64

6 (1.8)

6126

B

A

–

1

2

38.0

38.4

38.6

1.8

28

57

1.08 (28.3)

FPX8-64

8 (2.4)

6127

A

A

–

2

2

40.8

41.2

41.4

1.3

30

64

1.07 (29.4)

FPX10-64

10 (3.0)

6129

A

A

–

2

2

43.0

42.4

42.8

1.0

30

66

1.06 (30.7)

FPX12-64

12 (3.7)

6131

A

A

–

2

2

44.8

45.2

45.4

0.8

30

68

1.06 (30.7)

Focal Plane Antennas – Single Polarized Antenna Input: CPR137G and PDR70 FP6-64

6 (1.8)

6117

A

A

–

1

2

38.2

38.6

38.8

1.8

28

57

1.07 (29.4)

FP8-64

8 (2.4)

6119

A

A

–

2

2

41.1

41.5

41.8

1.3

30

64

1.06 (30.7)

FP10-64

10 (3.0)

6122

A

B

–

1

2

43.2

43.4

43.6

1.0

27

66

1.04 (34.2)

FP12-64

12 (3.7)

6123

A

A

–

2

2

44.9

45.3

45.5

0.8

30

68

1.04 (34.2)

Low Back Lobe Antennas – Dual Polarized Antenna Input: CPR137G

LBX

Regulatory Compliance*** LBX6-65**

6 (1.8)

834-2

–

–

B

–

–

39.1

39.6

40.0

1.7

33

54

1.07 (30.7)

LBX8-65**

8 (2.4)

825-3

–

–

B

–

–

41.5

42.0

42.4

1.3

33

60

1.06 (30.7)

LBX10-65**

10 (3.0)

826-1

–

–

B

–

–

43.1

43.6

44.0

1.0

33

65

1.06 (30.7)

LBX12-65**

12 (3.7)

827-1

–

–

B

–

–

44.8

45.3

45.7

0.8

33

63

1.06 (30.7)

Reference ETSI Document EN300833 for 3 to 60 GHz *Multiband antennas available in this frequency band. See pages 93-94. **8 lb/in2 (56 kPa) maximum ***ANATEL Brazilian Telecommunications Agency, Regulation 1286 Category

6.875-7.125 GHz, See PAR6-65

74



Waveguide Type

Flange Type††

Connector† Tunable

Fixed-Tuned

Pressure Window

UG-344/U††† CPR137G PDR70

163DCT 163DET –

– – 163SEM

55000A-137 55001-137 223306-70


EWP63S

Flex-Twist 2 ft (0.6 m) VSWR 1.05 (32.3)**

Premium Waveguide Assemblies

F137PA0240BB F137PC0240CB F137MH0600HB VSWR 1.06 (30.7)**

5.925–6.575

EWP63-59


163DCT 163DET –

– 163SE 163SEM

55000A-137 55001-137 223306-70

F137PA0240BA*** F137PC0240CA*** F137MH0600HA***

5.800–7.125

EWP63-59W


163DCT 163DET –

– 163SE 163SEM

55000A-137 55001-137 223306-70

F137PA0240BA*** F137PC0240CA*** F137MH0600HA***

EWP63-65N

UG-344/U†††

VSWR 1.05 (32.3)* 6.525–6.875

CPR137G PDR70

163DCT 163DET –

– 163SE 163SEM

55000A-137 55001-137 223306-70


6.425–7.125

EWP63-65



EW63

163DCT 163DET –

– 163SE 163SEM

55000A-137 55001-137 223306-70

Non-Tunable UG-344/U††† CPR137G PDR70


163DC 163DE –

– 163SE 163SEM

55000A-137 55001-137 223306-70

F137PA0240BS F137PC0240CB F137MH0600HS

* Contact Andrew for information on other frequency bands. ** VSWR max., (R.L., dB). Up to 300 ft (90 m). The indicated maximum VSWR characteristics are guaranteed for factory assemblies and are typical for field assemblies. *** Low VSWR guaranteed for 5.925 to 6.425 GHz, nominal for 5.925 to 6.575 GHz. † “Tunable” connectors ordered with factory assemblies are factory tuned. †† For detailed information on mating flanges, refer to pages 214-218. ††† Modified cover flange with gasket groove. Mates with UG choke or cover flanges.


Type No.

Hangers and Adapters Hanger Kit of 10, Recommended maximum spacing for outdoor installation is 3 ft (0.91 m)* 42396A-7 NEW! Snap-In Hanger Kit of 10. Recommended spacing for outdoor installation is 3.5 ft (1.07 m) EWSH-63 Hardware Kit of 10, 3/8" bolts, lock washers, nuts 3/4" (19 mm) long 31769-5 1" (25 mm) long 31769-1 Angle Adapter Kit of 10. Stainless steel 31768A Angle Adapter Kit of 10. Galvanized 3/8" Hardware 242774 Metric Hardware 242774-M Round Member Adapter Kit of 10. Stainless steel Member Diameter, in (mm) 1-2 (25-50) 31670-1 2-3 (50-75) 31670-2 3-4 (75-100) 31670-3 4-5 (100-125) 31670-4 5-6 (125-150) 31670-5 45° Adapter Kit of 10. Galvanized steel 42334 Threaded Rod Support, 3/8” rod, nuts, washers, ceiling bracket 12 in (305 mm) long, kit of 1 31771 12 in (305 mm) long, kit of 5 31771-4 24 in (610 mm) long, kit of 1 31771-9 24 in (610 mm) long, kit of 5 31771-6 Tower Standoff Kit of 10. 1 in (25 mm) standoff Member Diameter, in (mm) 0.75-1.5 (20-40) 30848-5 1.5-3.0 (40-75) 30848-4 3-4 (75-100) 30848-1 4-5 (100-125) 30848-2 5-6 (125-150) 30848-3 * Standard conditions: 125 mph (200 km/h) survival wind velocity, 0.5 in (13 mm) radial ice. For other conditions see page 196.


Description

Type No.


41108A-1 41108A-2 41108A-3


EWFTK-63 163DZ 204989-4 241088-4 204989-24 241088-9 204989-34 207270 24312A 33586-8 33544-33 245314-63 WGB4-63 WGB5-63


For 4 in Boots

For 5 in Boots

1 1 2 3 4 6 8

204673-1 204673-2 – – 204673-4 – 204673-8

48940-1 – 48940-2 48940-3 48940-4 48940-6 –


75

Refer to page 78 for Elliptical Waveguide ordering information 7.125 - 7.750 GHz Antenna Inputs. All antenna VSWR values are specified with CPR and PDR flanges. Other optional flanges may result in equal or slightly higher VSWR. Contact Andrew for details. Pressurization. Feeds are pressurizable to 10 lb/in2 (70 kPa). ValuLine® Antennas. See page 127.

Type Number


Diameter ft (m)

HPX HP

Low

Gain, dBi Mid-Band

Top

Beamwidth Degrees



High Performance Antennas – Dual Polarized Antenna Inputs: CPR137G, PDR70, and UG-343B/U

HPX4-70

4 (1.2)

2862

–

–

–

2

2

36.0

36.4

36.7

2.3

26

61

1.08 (28.3)

HPX6-70

6 (1.8)

2816

–

A

–

2

2

40.0

40.4

40.7

1.5

25

65

1.07 (29.4)

HPX8-70

8 (2.4)

2826

–

–

–

2

2

42.4

42.9

43.2

1.1

30

67

1.06 (30.7)

HPX10-70

10 (3.0)

2754

–

A

–

2

2

44.5

44.8

45.0

0.9

30

70

1.06 (30.7)

HPX12-70

12 (3.7)

2758

–

A

–

–

–

45.7

46.1

46.4

0.8

28

71

1.06 (30.7)

HPX15-70

15 (4.6)

2782

–

A

–

2

2

47.3

47.7

48.0

0.7

32

72

1.06 (30.7)

High Performance Antennas – Single Polarized Antenna Inputs: CPR137G, PDR70, and UG-343B/U HP6-70

6 (1.8)

2796

–

A

–

2

2

40.1

40.5

40.9

1.5

28

65

1.06 (30.7)

HP8-70

8 (2.4)

2751

–

A

–

2

2

42.6

43.0

43.3

1.1

30

67

1.06 (30.7)

HP10-70

10 (3.0)

2753

–

A

–

2

2

44.3

44.7

45.0

0.9

30

70

1.06 (30.7)

HP12-70

12 (3.7)

2756

–

A

–

2

2

46.3

46.7

47.1

0.7

30

71

1.06 (30.7)

HP15-70

15 (4.6)

2757

–

A

–

–

–

47.4

48.1

48.4

0.6

30

71

1.06 (30.7)

PXL PL

Standard Antennas – Dual Polarized Antenna Inputs: CPR137G, PDR70, and UG-343B/U

PXL6-70

6 (1.8)

2740

–

B

–

–

–

40.0

40.4

40.7

1.5

30

48

1.07 (29.4)

PXL8-70

8 (2.4)

2828

–

–

–

1

2

42.4

42.9

43.2

1.1

30

50

1.06 (30.7)

PXL10-70

10 (3.0)

2663

–

A

–

–

–

44.5

44.8

45.0

0.9

30

52

1.06 (30.7)

PXL12-70

12 (3.7)

2752

–

A

–

–

–

45.7

46.1

46.4

0.7

30

54

1.06 (30.7)

Standard Antennas – Single Polarized Antenna Inputs: CPR137G, PDR70, and UG-343B/U PL4-70

4 (1.2)

2736

–

–

–

1

2

36.7

37.0

37.3

2.2

30

46

1.06 (30.7)

PL6-70

6 (1.8)

2658

–

B

–

–

–

40.1

40.5

40.9

1.5

30

48

1.06 (30.7)

PL8-70

8 (2.4)

2659

–

B

–

1

2

42.6

43.0

43.3

1.1

30

50

1.06 (30.7)

PL10-70

10 (3.0)

2660

–

A

–

1

2

44.3

44.7

45.0

0.9

30

52

1.06 (30.7)

PL12-70

12 (3.7)

2662

–

B

–

1

2

46.3

46.7

47.1

0.7

30

54

1.06 (30.7)

PL15-70

15 (4.6)

2745

–

B

–

–

–

47.7

48.1

48.4

0.6

30

55

1.06 (30.7)

7.125 - 7.750 GHz Antenna Inputs. All antenna VSWR values are specified with CPR and PDR flanges. Other optional flanges may result in equal or slightly higher VSWR. Contact Andrew for details. Pressurization. Feeds are pressurizable to 10 lb/in2 (70 kPa). ValuLine Antennas. See page 127.

Type Number

Diameter ft (m)


Top

Beamwidth Degrees



High Performance Antennas - Super High Cross Polarization Discrimination – Dual Polarization Antenna Inputs: CPR112G, PDR84, and UG-52B/U

HSX HSX4-71

4 (1.2)

1548 1543

–

B

–

3

2

36.4

36.7

37.0

2.3

40

64

1.08 (28.3)

HSX6-71

6 (1.8)

1550 1554

–

A

–

3

2

40.0

40.3

40.6

1.5

40

72

1.08 (28.3)

HSX8-71

8 (2.4)

1556 1566

–

A

–

3

2

42.3

42.6

42.9

1.2

40

73

1.06 (30.7)

HSX10-71

10 (3.0)

1624 1622

–

A

–

3

2

43.9

44.2

44.4

1.0

40

75

1.06 (30.7)

HSX12-71

12 (3.7)

1626 1628

–

A

–

3

2

46.1

46.5

46.9

0.8

40

78

1.06 (30.7)

HSX15-71

15 (4.6)

1852 1858

–

A

–

3

2

47.7

48.1

48.5

0.6

40

78

1.06 (30.7)


76

Low

Gain, dBi Mid-Band




7.125 - 7.750 GHz Antenna Inputs. All antenna VSWR values are specified with CPR and PDR flanges. Other optional flanges may result in equal or slightly higher VSWR. Contact Andrew for details. Pressurization. Feeds are pressurizable to 10 lb/in2 (70 kPa) except LBX Series 8 lb/in2 (56 kPa). ValuLine® Antennas. See page 127.

Type Number

Diameter ft (m)

HPX HP


Low

Gain, dBi Mid-Band

Top

Beamwidth Degrees



High Performance Antennas – Dual Polarization Antenna Inputs: CPR112G and PDR84

HPX6-71

6 (1.8)

3771

–

B

–

2

2

39.5

39.9

40.2

1.6

30

66

1.06 (30.7)

HPX8-71

8 (2.4)

2775

–

A

–

2

2

42.1

42.5

42.8

0.9

30

67

1.06 (30.7)

High Performance Antennas – Single Polarized Antenna Inputs: CPR112G, PDR84, and UG-52B/U HP4-71

4 (1.2)

2866

–

–

1

2

35.8

36.2

36.5

2.4

28

62

1.08 (28.3)

HP6-71

6 (1.8)

2800

–

–

2

2

39.7

40.0

40.3

1.5

30

66

1.06 (30.7)

HP8-71

8 (2.4)

2770

–

A

–

–

–

42.3

42.5

42.9

1.1

30

68

1.06 (30.7)

HP10-71

10 (3.0)

2772

–

A

–

3

2

44.1

44.5

44.8

0.9

28

70

1.06 (30.7)

HP12-71

12 (3.7)

2774

–

A

–

3

2

45.6

46.0

46.3

0.7

30

71

1.06 (30.7)

HP15-71

15 (4.6)

2783

–

–

–

2

2

47.5

47.8

48.2

0.6

30

71

1.06 (30.7)

PL

Standard Antennas – Single Polarized Low VSWR Antenna Inputs: CPR112G, PDR84, and UG-52B/U

PL4-71

4 (1.2)

3718

–

–

–

1

2

36.2

36.5

36.8

2.2

30

45

1.10 (26.4)

PL6-71

6 (1.8)

2704

–

B

–

1

2

39.7

40.0

40.3

1.5

30

48

1.06 (30.7)

PL8-71

8 (2.4)

2700

–

B

–

1

2

42.3

42.5

42.9

1.1

30

50

1.06 (30.7)

PL10-71

10 (3.0)

2699

–

A

–

1

2

44.1

44.5

44.8

0.9

30

52

1.06 (30.7)

PL12-71

12 (3.7)

3710

–

B

–

1

2

45.6

46.0

46.3

0.7

30

54

1.06 (30.7)

PL15-71

15 (4.6)

2726

–

B

–

1

2

47.5

47.8

48.2

0.6

30

57

1.06 (30.7)

FPX FP

Focal Plane Antennas – Dual Polarized Antenna Input: PDR70

FPX6-71

6 (1.8)

6141

–

–

–

1

2

38.8

39.2

39.5

1.5

25

58

1.08 (28.3)

FPX8-71

8 (2.4)

6143

–

A

–

2

2

41.8

42.1

42.3

1.1

26

65

1.07 (29.4)

FPX10-71

10 (3.0)

6145

–

A

–

2

2

43.9

44.2

44.3

0.9

26

67

1.06 (30.7)

FPX12-71

12 (3.7)

6147

–

A

–

2

2

45.5

45.9

46.0

0.7

28

69

1.06 (30.7)

Focal Plane Antennas – Single Polarized Antenna Input: PDR70 FP4-71

4 (1.2)

6132

–

–

–

1

2

34.9

35.2

35.4

2.2

25

52

1.10 (26.4)

FP6-71

6 (1.8)

6133

–

–

–

1

2

38.8

39.2

39.5

1.5

25

58

1.07 (29.4)

FP8-71

8 (2.4)

6135

–

A

–

2

2

42.0

42.3

42.4

1.1

26

65

1.06 (30.7)

FP10-71

10 (3.0)

6137

–

A

–

2

2

44.1

44.4

44.5

0.9

26

67

1.04 (34.2)

FP12-71

12 (3.7)

6139

–

A

–

2

2

45.7

46.1

46.2

0.7

28

69

1.04 (34.2)

Low Back Lobe Antennas – Dual Polarized Antenna Inputs: CPR137G and PDR70

LBX

Regulatory Compliance** LBX6-71*

6 (1.8)

814-1

–

–

B

–

–

40.0

40.4

40.7

1.5

33

55

1.07 (29.4)

LBX8-71*

8 (2.4)

523-2

–

–

B

–

–

42.5

42.9

43.2

1.1

33

60

1.06 (30.7)

LBX10-71*

10 (3.0)

815-1

–

–

B

–

–

44.4

44.8

45.1

0.9

33

66

1.06 (30.7)

LBX12-71*

12 (3.7)

527-2

–

–

B

–

–

45.7

46.1

46.4

0.7

33

64

1.06 (30.7)

Reference ETSI Document EN300833 for 3 to 60 GHz *8 lb/in2 (56 kPa) maximum **ANATEL Brazilian Telecommunications Agency, Regulation 1286 Category



77


Waveguide Type


Flange Type††

Premium Waveguide Assemblies 7.125-7.750

EWP64-71


Pressure Window

VSWR 1.06 (30.7)** UG-344/U††† CPR137G CPR112G PDR70 PDR84

164DCT 164DET 264DET – –

164SC 164SE 264SCM 164SEM 264SEM

55000A-137 55001-137 55001-112 223306-70 –

F137PA0240BC F137PC0240CC F112PC0240CA F137MH0600HC F112MH0600HA

6.425-7.125

EWP64-65


164DCT 164DET – –


55000A-137 55001-137 223306-70 –

F137PA0240BB F137PC0240CB F137MH0600HB F137MP0600PB

6.525-6.875

EWP64-65N


164DCT 164DET – –


55000A-137 55001-137 223306-70 –

F137PA0240BB F137PC0240CB F137MH0600HB F137MP0600PB

Standard Waveguide Assemblies 6.425-7.750

7.125-7.750

EW64

EW64

VSWR 1.15 (23.1)** UG-344/U††† CPR137G PDR70

164DC 164DE –

– 164SE 164SEM

55000A-137 55001-137 223306-70

F137PA0240BS F137PC0240CS F137MH0600HS

CPR112G PDR84

264DE –

264SE 264SEM

55001-112 –

F112PC0240CC F112MH0600HC

* Contact Andrew for information on other frequency bands. ** VSWR max., (R.L., dB). Up to 300 ft (90 m). The indicated maximum VSWR characteristics are guaranteed for factory assemblies and are typical for field assemblies. † “Tunable” connectors ordered with factory assemblies are factory tuned. †† For detailed information on mating flanges, refer to pages 214-218. ††† Modified cover flange with gasket groove. Mates with UG choke or cover flanges.


Type No.

Hangers and Adapters Hanger Kit of 10, Recommended maximum spacing for outdoor installation is 3.5 ft (1.07 m)* 42396A-1 NEW! Snap-In Hanger Kit of 10. Recommended spacing for outdoor installation is 3.5 ft (1.07 m) EWSH-64 Hardware Kit of 10, 3/8" bolts, lock washers, nuts 3/4" (19 mm) long 31769-5 1" (25 mm) long 31769-1 Angle Adapter Kit of 10. Stainless steel 31768A Angle Adapter Kit of 10. Galvanized 3/8" Hardware 242774 Metric Hardware 242774-M Round Member Adapter Kit of 10. Stainless steel Member Diameter, in (mm) 1-2 (25-50) 31670-1 2-3 (50-75) 31670-2 3-4 (75-100) 31670-3 4-5 (100-125) 31670-4 5-6 (125-150) 31670-5 45° Adapter Kit of 10. Galvanized steel 42334 Threaded Rod Support, 3/8” rod, nuts, washers, ceiling bracket 12 in (305 mm) long, kit of 1 31771 12 in (305 mm) long, kit of 5 31771-4 24 in (610 mm) long, kit of 1 31771-9 24 in (610 mm) long, kit of 5 31771-6 Tower Standoff Kit of 10. 1 in (25 mm) standoff Member Diameter, in (mm) 0.75-1.5 (20-40) 30848-5 1.5-3.0 (40-75) 30848-4 3-4 (75-100) 30848-1 4-5 (100-125) 30848-2 5-6 (125-150) 30848-3 * Standard conditions: 125 mph (200 km/h) survival wind velocity, 0.5 in (13 mm) radial ice. For other conditions see page 196.

78

Description

Type No.


41108A-1 41108A-2 41108A-3


202358 164DZ 204989-3 241088-3 204989-23 241088-8 204989-33 207270 29961 33586-2 33544-35 245314-64 WGB4-64 WGB5-64


For 4 in Boots

For 5 in Boots

1 1 2 3 4 6 8

204673-1 204673-2 – – 204673-4 – 204673-8

48940-1 – 48940-2 48940-3 48940-4 48940-6 –



7.125 - 8.400 GHz Antenna Inputs. All antenna VSWR values are specified with CPR and PDR flanges. Other optional flanges may result in equal or slightly higher VSWR. Contact Andrew for details. Pressurization. Feeds are pressurizable to 10 lb/in2 (70 kPa). ValuLine® Antennas. See page 127.

Type Number

Diameter ft (m)


Low

Gain, dBi Mid-Band

Top

Beamwidth Degrees



High Performance/Wide Band Antennas – Dual Polarization Antenna Inputs: CPR112G and PDR84

HPX HPX6-71W

6 (1.8)

2860

–

–

–

2

2

39.6

40.4

41.0

1.5

30

65

1.15 (23.1)

HPX8-71W

8 (2.4)

2825

–

–

–

2

2

42.1

42.9

43.5

1.2

30

67

1.10 (26.4)

HPX10-71W

10 (3.0)

2864

–

–

–

–

–

44.1

44.9

45.5

0.9

30

70

1.10 (26.4)

HPX12-71W

12 (3.7)

1009

–

–

–

–

–

46.1

46.7

47.5

0.8

30

70

1.10 (26.4)

HPX15-71W

15 (4.6)

697

–

–

–

–

–

47.9

48.6

49.4

0.7

30

65

1.10 (26.4)


Type Number

Diameter ft (m)


Low

Gain, dBi Mid-Band

Top

Beamwidth Degrees



High Performance/Wide Band Antennas – Single Polarized Antenna Inputs: CPR112G and PDR84

HP HP6-71W

6 (1.8)

2818

–

–

–

3

2

39.7

40.3

41.1

1.5

30

66

1.06 (30.7)

HP8-71W

8 (2.4)

2820

–

–

–

2

2

42.3

42.9

43.6

1.1

30

68

1.06 (30.7)

HP10-71W

10 (3.0)

2821

–

–

–

2

2

44.0

44.8

45.5

0.9

30

70

1.06 (30.7)

HP12-71W

12 (3.7)

2822

–

–

–

2

2

46.2

46.8

47.6

0.7

30

71

1.06 (30.7)

PL P

Standard/Wide Band Antennas – Standard and Low VSWR Antenna Inputs: CPR112G and PDR84

PL6-71W

6 (1.8)

3703

B

–

–

–

–

39.7

40.3

41.1

1.5

30

48

1.10 (26.4)

PL8-71W

8 (2.4)

1271

B

–

–

–

–

42.3

42.9

43.6

1.1

30

52

1.10 (26.4)

PL10-71W

10 (3.0)

1273

A

–

–

–

–

44.0

44.8

45.5

0.9

30

55

1.10 (26.4)

PL12-71W

12 (3.7)

1275

B

–

–

1

2

45.6

46.3

47.1

0.7

30

58

1.10 (26.4)

PL15-71W

15 (4.6)

2710

B

–

–

2

2

47.5

48.2

48.9

0.6

30

57

1.10 (26.4)




79



Type Number

Low

Gain, dBi Mid-Band

Top

Beamwidth Degrees



High Performance Antennas - Super High Cross Polarization Discrimination – Dual Polarized Antenna Inputs: CPR112G and PDR84

HSX HSX4-74 HSX6-74 HSX8-74 HSX10-74 HSX12-74 HSX15-74


Diameter ft (m)

4 (1.2) 6 (1.8) 8 (2.4) 10 (3.0) 12 (3.7) 15 (4.6)

HPX HP

2157 2156 1860 1864 1865 1866 1913 1912 1914 1916 1918 1920

– – – – – –

– – – – – –

– – – – – –

3 3 3 3 3 3

2 2 2 2 2 2

36.7 40.3 42.6 44.0 46.5 48.0

37.0 40.6 42.9 44.3 46.8 48.3

37.3 40.9 43.2 44.6 47.0 48.6

2.3 1.5 1.1 0.9 0.8 0.6

40 40 40 40 40 40

64 67 74 75 78 78

1.08 (28.3) 1.08 (28.3) 1.06 (30.7) 1.06 (30.7) 1.06 (30.7) 1.06 (30.7)

3712 – – – 3 2 3697 – – – 3 2 3699 – – – 3 2 3695 – – – 2 2 High Performance Antennas – Single Polarized Antenna Inputs: CPR112G and PDR84 4112 – – – 2 2 3691 – – – 2 2 3694 – – – 2 2 2792 – – – 1 2

37.1 40.5 42.9 44.3

37.4 40.8 43.1 44.7

37.6 41.1 43.4 45.0

2.5 1.5 1.2 1.1

32 32 32 30

63 67 70 68

1.10 (26.4) 1.06 (30.7) 1.06 (30.7) 1.06 (30.7)

36.5 40.1 42.5 43.8

36.7 40.4 42.8 44.0

37.0 40.6 43.0 44.2

2.3 1.5 1.2 1.0

32 32 32 32

61 64 70 70

1.06 (30.7) 1.06 (30.7) 1.04 (34.2) 1.04 (34.2)


HPX4-74 HPX6-74 HPX8-74 HPX10-74

4 (1.2) 6 (1.8) 8 (2.4) 10 (3.0)

HP4-74 HP6-74 HP8-74 HP10-74

4 (1.2) 6 (1.8) 8 (2.4) 10 (3.0)

7.725 - 8.275 GHz* Antenna Inputs. All antenna VSWR values are specified with CPR and PDR flanges. Other optional flanges may result in equal or slightly higher VSWR. Contact Andrew for details. Pressurization. Feeds are pressurizable to 10 lb/in2 (70 kPa). ValuLine® Antennas. See page 127.

Type Number

Diameter ft (m)

Top

Beamwidth Degrees



6 (1.8)

2874 2875

–

–

–

3

2

40.5

41.0

41.2

1.5

30

67

1.06 (30.7)

UHX8-77

8 (2.4)

2833 2834

–

–

–

2

2

43.1

43.5

43.7

1.1

30

68

1.06 (30.7)

UHX10-77

10 (3.0)

2835 2836

–

–

–

2

2

44.9

45.2

45.4

0.9

30

70

1.06 (30.7)

UHX12-77

12 (3.7)

2838 2837

–

–

–

3

2

46.4

46.7

46.9

0.7

30

75

1.06 (30.7)

UHX15-77

15 (4.6)

2839 2840

–

–

–

2

2

48.4

48.7

48.9

0.6

30

70

1.06 (30.7)


HSX HSX4-77

4 (1.2)

2588 2589

–

–

–

3

2

37.0

37.2

37.5

2.3

40

64

1.08 (28.3)

HSX6-77

6 (1.8)

1922 1924

–

–

–

3

2

40.7

41.0

41.4

1.5

40

67

1.06 (30.7)

HSX8-77

8 (2.4)

1929 1930

–

–

–

3

2

43.2

43.5

43.8

1.1

40

77

1.06 (30.7)

HSX10-77

10 (3.0)

1966 1967

–

–

–

3

2

44.8

45.2

45.6

0.9

40

79

1.06 (30.7)

HSX12-77

12 (3.7)

1968 1969

–

–

–

3

2

46.4

46.7

47.0

0.7

40

79

1.06 (30.7)

HSX15-77

15 (4.6)

1960 1962

–

–

–

–

–

48.3

48.6

48.8

0.6

40

76

1.06 (30.7)

Reference ETSI Document EN300833 for 3 to 60 GHz *Multiband antennas are available in this frequency band. See pages 93-94.

80

Low

Gain, dBi Mid-Band


UHX UHX6-77





7.725 - 8.275 GHz* Antenna Inputs. All antenna VSWR values are specified with CPR and PDR flanges. Other optional flanges may result in equal or slightly higher VSWR. Contact Andrew for details. Pressurization. Feeds are pressurizable to 8 lb/in2 (56 kPa). ValuLine® Antennas. See page 127.

Type Number

Diameter ft (m)

RPE Number(s)

Regulatory Compliance***

Low

Gain, dBi Mid-Band

Top

Beamwidth Degrees




HPX HPX6-77*

6 (1.8)

552-2

–

–

A

–

–

40.5

40.8

41.1

1.5

33

66

1.07 (29.4)

HPX8-77*

8 (2.4)

553-2

–

–

A

–

–

43.2

43.5

43.8

1.1

33

68

1.06 (30.7)

HPX10-77*

10 (3.0)

554-4

–

–

A

–

–

44.9

45.2

45.5

0.9

33

70

1.06 (30.7)

HPX12-77*

12 (3.7)

555-4

–

–

A

–

–

46.4

46.7

47.0

0.7

33

72

1.06 (30.7)

Standard Antennas – Dual Polarized Low VSWR Antenna Inputs: CPR112G and PDR84

PXL PXL6-77**

6 (1.8)

657-2

–

–

B

–

–

40.3

40.6

40.9

1.5

33

48

1.07 (29.4)

PXL8-77**

8 (2.4)

658-2

–

–

B

–

–

42.8

43.1

43.4

1.1

33

50

1.06 (30.7)

PXL10-77**

10 (3.0)

659-2

–

–

B

–

–

44.7

45.0

45.3

0.9

33

54

1.06 (30.7)

PXL12-77**

12 (3.7)

660-2

–

–

B

–

–

46.6

46.9

47.2

0.7

33

63

1.06 (30.7)

40.3

40.8

41.1

1.5

33

56

1.07 (29.4)


LBX LBX6-77**

6 (1.8)

559-2

LBX8-77**

8 (2.4)

560-2

LBX10-77**

10 (3.0)

561-4

LBX12-77**

12 (3.7)

562-2

–

B

–

–

–

B

–

–

42.8

43.1

43.4

1.1

33

60

1.06 (30.7)

–

–

B

–

–

44.9

45.2

45.5

0.9

33

66

1.06 (30.7)

–

–

B

–

–

46.4

46.7

47.0

0.7

33

67

1.06 (30.7)

Reference ETSI Document EN300833 for 3 to 60 GHz *Multiband antennas are available in this frequency band. See pages 93-94. **8 lb/in2 (56 kPa) maximum ***ANATEL Brazilian Telecommunications Agency, Regulation 1286 Category



81


7.75 - 8.40 GHz* Type Number

Diameter ft (m)


Low

Gain, dBi Mid-Band

Top

Beamwidth Degrees



High Performance Antennas – Single Polarized Antenna Inputs: CPR112G and PDR84

HP HP4-77

4 (1.2)

2858

–

–

–

2

2

36.8

37.2

37.5

2.2

30

63

1.06 (30.7)

HP6-77

6 (1.8)

3763

–

–

–

2

2

40.3

40.8

41.1

1.5

30

68

1.06 (30.7)

HP8-77

8 (2.4)

3765

–

–

–

2

2

42.9

43.3

43.6

1.1

30

68

1.06 (30.7)

HP10-77

10 (3.0)

2868

–

–

–

2

2

44.8

45.2

45.5

0.9

30

70

1.06 (30.7)

HP12-77

12 (3.7)

3767

–

–

–

3

2

46.3

46.7

47.1

0.7

30

71

1.06 (30.7)

HP15-77

15 (4.6)

3768

–

–

–

–

–

48.2

48.5

48.9

0.6

30

71

1.06 (30.7)

Standard Antennas – Single Polarized Antenna Inputs: CPR112G and PDR84

PL PL4-77

4 (1.2)

3716

–

–

–

–

–

36.8

37.2

37.5

2.2

30

45

1.06 (30.7)

PL6-77

6 (1.8)

3721

–

–

–

–

–

40.3

40.8

41.1

1.5

30

48

1.06 (30.7)

PL8-77

8 (2.4)

2760

–

–

–

–

–

42.9

43.3

43.6

1.1

30

50

1.06 (30.7)

PL10-77

10 (3.0)

2747

–

–

–

1

2

44.8

45.2

45.5

0.9

30

58

1.06 (30.7)

PL12-77

12 (3.7)

2748

–

–

–

1

2

46.3

46.7

47.1

0.7

30

54

1.06 (30.7)

PL15-77

15 (4.6)

2763

–

–

–

1

2

48.2

48.5

48.9

0.6

30

57

1.06 (30.7)

2

40.2

40.4

40.6

1.5

30

58

1.08 (28.3)

FPX FP FPX6-77

Focal Plane Antennas – Dual Polarized Antenna Inputs: CPR112G and PDR84 6 (1.8)

6161

–

–

–

1

Focal Plane Antennas – Single Polarized Antenna Inputs: CPR112G and PDR84 FP6-77

6 (1.8)

6150

–

–

–

1

2

40.2

40.6

40.8

1.5

30

60

1.07 (29.4)

FP8-77

8 (2.4)

6151

–

–

–

1

2

42.9

43.3

43.5

1.1

26

64

1.06 (30.7)

FP10-77

10 (3.0)

6153

–

–

–

2

2

44.9

45.3

45.4

0.9

30

66

1.04 (34.2)

FP12-77

12 (3.7)

6155

–

–

–

2

2

46.5

46.9

47.0

0.7

28

68

1.04 (34.2)

Reference ETSI Document EN300833 for 3 to 60 GHz *Multiband antennas are available in this frequency band. See pages 93-94.

82



8.2 - 8.5 GHz Antenna Inputs. All antenna VSWR values are specified with CPR and PDR flanges. Other optional flanges may result in equal or slightly higher VSWR. Contact Andrew for details. Pressurization. Feeds are pressurizable to 10 lb/in2 (70 kPa) except LBX Series 8 lb/in2 (56 kPa). ValuLine® Antennas. See page 127.

Type Number

Diameter ft (m)


Low

Gain, dBi Mid-Band

Top

Beamwidth Degrees




HSX HSX4-82

4 (1.2)

1799, 1810

–

–

–

3

2

37.5

37.6

37.7

2.3

40

63

1.08 (28.3)

HSX6-82

6 (1.8)

1222 1224

–

–

–

3

2

41.3

41.4

41.7

1.4

40

67

1.06 (30.7)

HSX8-82

8 (2.4)

1226 1228

–

–

–

3

2

43.7

43.8

43.9

1.0

40

78

1.06 (30.7)

HSX10-82

10 (3.0)

1230 1232

–

–

–

3

2

45.3

45.4

45.5

0.8

40

78

1.06 (30.7)

HSX12-82

12 (3.7)

1236 1234

–

–

–

3

2

47.1

47.2

47.3

0.7

40

79

1.06 (30.7)

HSX15-82

15 (4.6)

1238 1240

–

–

–

–

–

48.7

48.8

48.9

0.6

40

76

1.06 (30.7)

HPX HP


HPX6-82

6 (1.8)

2883

–

–

–

1

2

41.0

41.1

41.2

1.3

30

58

1.06 (30.7)

HPX8-82

8 (2.4)

2863

–

–

–

2

2

43.5

43.6

43.7

1.0

30

67

1.06 (30.7)

HPX10-82

10 (3.0)

2865

–

–

–

2

2

45.5

45.6

45.7

0.8

30

70

1.06 (30.7)

HPX12-82

12 (3.7)

2867

–

–

–

2

2

47.1

47.2

47.3

0.7

30

70

1.06 (30.7)

HPX15-82

15 (4.6)

2869

–

–

–

2

2

48.7

48.8

48.9

0.6

30

70

1.06 (30.7)

High Performance Antennas – Single Polarized Antenna Inputs: CPR112G and PDR84 HP6-82

6 (1.8)

2882

–

–

–

2

2

40.6

40.8

41.0

1.5

30

68

1.06 (30.7)

HP8-82

8 (2.4)

2891

–

–

–

2

2

43.4

43.5

43.7

1.1

30

68

1.06 (30.7)

HP10-82

10 (3.0)

2893

–

–

–

2

2

45.3

45.5

45.7

0.9

30

70

1.06 (30.7)

HP12-82

12 (3.7)

2895

–

–

–

2

2

46.8

47.0

47.1

0.7

30

71

1.06 (30.7)

HP15-82

15 (4.6)

2889

–

–

–

2

2

48.6

48.8

48.9

0.6

30

71

1.06 (30.7)

PXL PL


PXL6-82

6 (1.8)

2851

–

–

–

–

–

41.0

41.1

41.2

1.3

30

48

1.06 (30.7)

PXL8-82

8 (2.4)

2853

–

–

–

1

2

43.7

43.8

43.9

1.0

30

55

1.06 (30.7)

PXL10-82

10 (3.0)

2855

–

–

–

1

2

45.7

45.8

45.9

0.8

30

57

1.06 (30.7)

PXL12-82

12 (3.7)

2857

–

–

–

1

2

47.3

47.4

47.5

0.7

30

63

1.06 (30.7)

PXL15-82

15 (4.6)

2859

–

–

–

–

–

48.5

48.6

48.7

0.6

30

65

1.06 (30.7)

Standard Antennas – Single Polarized Low VSWR Antenna Inputs: CPR112G and PDR84 PL6-82

6 (1.8)

2871

–

–

–

1

2

40.6

40.8

41.0

1.5

30

48

1.06 (30.7)

PL8-82

8 (2.4)

2897

–

–

–

1

2

43.4

43.5

43.7

1.1

30

50

1.06 (30.7)

PL10-82

10 (3.0)

2899

–

–

–

1

2

43.3

45.5

45.7

0.9

30

58

1.06 (30.7)

PL12-82

12 (3.7)

2901

–

–

–

1

2

46.8

47.0

47.1

0.7

30

54

1.06 (30.7)

PL15-82

15 (4.6)

2903

–

–

–

1

2

48.6

48.8

48.6

0.6

30

57

1.06 (30.7)


LBX

Regulatory Compliance** LBX6-82*

6 (1.8)

786-1

–

–

B

–

–

40.9

41.1

41.2

1.5

33

58

1.07 (29.4)

LBX8-82*

8 (2.4)

787-2

–

–

B

–

–

43.6

43.8

43.9

1.1

33

60

1.06 (30.7)

LBX10-82*

10 (3.0)

788-2

–

–

B

–

–

45.6

45.8

45.9

0.9

33

63

1.06 (30.7)

LBX12-82*

12 (3.7)

789-2

–

–

B

–

–

46.9

47.1

47.2

0.7

33

65

1.06 (30.7)

Reference ETSI Document EN300833 for 3 to 60 GHz *8 lb/in2 (56 kPa) maximum **ANATEL Brazilian Telecommunications Agency, Regulation 1286 Category



83


Waveguide Type

Flange Type††


Premium Waveguide Assemblies 7.125–7.750

EWP77-71


Pressure Window

VSWR 1.06 (30.7)** UG-51/U††† CPR112G PBR84 PDR84 PDR70

177DCT 177DET 177DCMT 177DEMT 277DEMT

177SC 177SE 177SCM 177SEM –

55000A-112 55001-112 243498-84 223306-84 223306-70

F112PA0240BA F112PC0240CA F112MK0600KA F112MH0600HA F137MH0600HC

7.725–8.500

EWP77-77

UG-51/U††† CPR112G PBR84 PDR84 PDR70


177SC 177SE 177SCM 177SEM –

55000A-112 55001-112 243498-84 223306-84 223306-70

F112PA0240BB F112PC0240CB F112MK0600KB F112MH0600HB F137MH0600HF‡

7.125–8.500

EWP77-71W

UG-51/U††† CPR112G PBR84 PDR84 PDR70


177SC 177SE 177SCM 177SEM –

55000A-112 55001-112 243498-84 223306-84 223306-70

F112PA0240BC F112PC0240CC F112MK0600KC F112MH0600HC F137MH0600HE

*** Standard Waveguide Assemblies 7.125–8.500

EW77

Non-Tunable UG-51/U††† PBR84 CPR112G PDR84

VSWR 1.15 (23.1)**

177DC 177DCM 177DE 177DEM

177SC 177SCM 177SE 177SCM

55000A-112 243498-84 55001-112 223306-84

F112PA0240BC F112MK0600KC F112PC0240CC F112MH0600HC

*

Contact Andrew for information on other frequency bands. ** VSWR max., (R.L., dB). Up to 300 ft (90 m). The indicated maximum VSWR characteristics are guaranteed for factory assemblies and are typical for field assemblies. *** 7.425 - 7.925 GHz ‡ 7.725 - 8.3 GHz ONLY † “Tunable” connectors ordered with factory assemblies are factory tuned. †† For detailed information on mating flanges, refer to pages 214-218. ††† Modified cover flange with gasket groove. Mates with UG choke or cover flanges.


Type No.

Hangers and Adapters Hanger Kit of 10, Recommended maximum spacing for outdoor installation is 3 ft (0.91 m)* 42396A-11 NEW! Snap-In Hanger Kit of 10. Recommended spacing for outdoor installation is 3 ft (0.91 m) EWSH-77 Hardware Kit of 10, 3/8" bolts, lock washers, nuts 3/4" (19 mm) long 31769-5 1" (25 mm) long 31769-1 Angle Adapter Kit of 10. Stainless steel 31768A Angle Adapter Kit of 10. Galvanized 3/8" Hardware 242774 Metric Hardware 242774-M Round Member Adapter Kit of 10. Stainless steel Member Diameter, in (mm) 1-2 (25-50) 31670-1 2-3 (50-75) 31670-2 3-4 (75-100) 31670-3 4-5 (100-125) 31670-4 5-6 (125-150) 31670-5 45° Adapter Kit of 10. Galvanized steel 42334 Threaded Rod Support, 3/8” rod, nuts, washers, ceiling bracket 12 in (305 mm) long, kit of 1 31771 12 in (305 mm) long, kit of 5 31771-4 24 in (610 mm) long, kit of 1 31771-9 24 in (610 mm) long, kit of 5 31771-6 Tower Standoff Kit of 10. 1 in (25 mm) standoff Member Diameter, in (mm) 0.75-1.5 (20-40) 30848-5 1.5-3.0 (40-75) 30848-4 3-4 (75-100) 30848-1 4-5 (100-125) 30848-2 5-6 (125-150) 30848-3 * Standard conditions: 125 mph (200 km/h) survival wind velocity, 0.5 in (13 mm) radial ice. For other conditions see page 196.

84

Description

Type No.


41108A-1 41108A-2 41108A-3


202421 177DZ 204989-3 241088-3 204989-23 241088-8 204989-33 207270 19256B 33586-9 33544-34 245314-77 WGB4-77 WGB5-77


For 4 in Boots

For 5 in Boots

1 1 2 3 4 6 8

204673-1 204673-2 – – 204673-4 – 204673-8

48940-1 – 48940-2 48940-3 48940-4 48940-6 –


Refer to page 88 for Elliptical Waveguide ordering information 10.5 - 11.7 GHz* Antenna Inputs. All antenna VSWR values are specified with CPR and PDR flanges. Other optional flanges may result in equal or slightly higher VSWR. Contact Andrew for details. Pressurization. Feeds are pressurizable to 10 lb/in2 (70 kPa). ValuLine® Antennas. See page 127.

Type Number

Diameter ft (m)

4 (1.2) 6 (1.8) 8 (2.4) 10 (3.0) 12 (3.7)

4 (1.2) 6 (1.8) 8 (2.4) 10 (3.0) 12 (3.7)

HPX HP

40.4 44.0 46.5 48.0 49.8



2098 2097 2141 2142 2124 2125 2127 2126 2128 2129

A A – A A

– – – – –

– – – – –

3 3 – 3 3

2 2 – 2 2

40.8 44.4 46.8 48.3 50.2

1.6 1.1 0.8 0.7 0.5

33 33 33 33 33

70 80 80 82 80

1.08 (28.3) 1.06 (30.7) 1.06 (30.7) 1.06 (30.7) 1.06 (30.7)

2314 2312 2316 2318 2320 2322 2340 2338 2362 2364

A A A A A

– – – – –

– – – – –

2 3 2 2 3

2 2 2 2 2

39.8 43.5 46.0 47.8 49.2

40.2 43.9 46.5 48.2 49.6

40.6 44.3 46.8 48.6 50.3

1.6 1.1 0.8 0.7 0.5

40 40 40 40 40

64 72 75 75 80

1.10 (26.4) 1.08 (28.3) 1.06 (30.7) 1.06 (30.7) 1.06 (30.7)

2460 B – – 2 2 3224 A – – 2 2 3175 A – – 2 2 3173 A – – 2 2 3190 A – – 2 2 High Performance Antennas – Single Polarized Antenna Inputs: CPR90G and PDR100 3429 A – – 2 2 3222 A – – 3 2 3174 A – – 3 2 3250 A – – – – 3188 A – – 2 2

40.0 43.6 46.0 47.9 49.4

40.3 44.0 46.4 48.3 49.8

40.6 44.4 46.8 48.6 50.2

1.6 1.0 0.8 0.7 0.5

30 30 30 30 30

62 70 70 70 72

1.10 (26.4) 1.08 (28.3) 1.06 (30.7) 1.06 (30.7) 1.06 (30.7)

40.0 43.6 46.0 47.9 49.4

40.4 44.0 46.4 48.3 49.8

40.8 44.4 46.8 48.6 50.2

1.6 1.0 0.8 0.7 0.5

30 30 30 30 30

61 70 71 70 70

1.08 (28.3) 1.06 (30.7) 1.06 (30.7) 1.06 (30.7) 1.06 (30.7)


HPX4-107 HPX6-107 HPX8-107 HPX10-107 HPX12-107

4 (1.2) 6 (1.8) 8 (2.4) 10 (3.0) 12 (3.7)

HP4-107 HP6-107 HP8-107 HP10-107 HP12-107

4 (1.2) 6 (1.8) 8 (2.4) 10 (3.0) 12 (3.7)

High Performance, Dual Beam Antennas – Dual Polarized Angle Diversity Antenna Input: CPR90G

HDX HDX8-107

8 (2.4)

HDX10-107

10 (3.0)

3791 3793 3787 3789 4352 4353 4354 4355

A

–

–

2/3

2

47.6

47.9

48.1

0.8

26

78

1.10 (26.4)

A

–

–

3

2

47.6

47.9

48.1

0.8

22

78

1.10 (26.4)

1 1

2 2

43.2 45.8

43.6 46.2

44.0 46.6

1.1 0.8

30 30

60 63

1.06 (30.7) 1.06 (30.7)

43.6 46.0 47.9 49.4

44.0 46.4 48.3 49.8

44.4 46.8 48.6 50.2

1.0 0.8 0.7 0.5

30 30 30 30

49 50 52 53

1.08 (28.3) 1.06 (30.7) 1.06 (30.7) 1.06 (30.7)

40.1 43.6 46.0 47.8 49.4

40.5 44.0 46.4 48.2 49.8

40.9 44.4 46.8 48.5 50.2

1.6 1.0 0.8 0.7 0.5

30 30 30 30 30

46 51 53 54 60

1.08 (28.3) 1.06 (30.7) 1.06 (30.7) 1.06 (30.7) 1.06 (30.7)

Standard Antennas – Single Polarized Antenna Inputs: CPR90G and PDR100

PAR PAR6-107** PAR8-107**

40.0 43.6 46.0 47.6 49.4

Top

Beamwidth Degrees


HSX HSX4-107 HSX6-107 HSX8-107 HSX10-107 HSX12-107

Low

Gain, dBi Mid-Band


UHX UHX4-107 UHX6-107 UHX8-107 UHX10-107 UHX12-107


6 (1.8) 8 (2.4)

PXL PL

3743 3745

A A

– –

– –


PXL6-107 PXL8-107 PXL10-107 PXL12-107

6 (1.8) 8 (2.4) 10 (3.0) 12 (3.7)

PL4-107 PL6-107 PL8-107 PL10-107 PL12-107

4 (1.2) 6 (1.8) 8 (2.4) 10 (3.0) 12 (3.7)

3183 B – – – – 3185 B – – – – 3187 B – – – – 3199 B – – – – Standard Antennas – Single Polarized Low VSWR Antenna Inputs: CPR90G and PDR100 3214 B – – – – 3101 B – – – – 3249 B – – 1 2 3200 B – – – – 3116 B – – 1 2

Reference ETSI Document EN300833 for 3 to 60 GHz * Multiband antennas are available for this frequency band. See pages 93-94.


** Uses focal plane reflector and feed system


87


Waveguide Type

Flange Type††


CPR90G PDR100

190DET 190DEMT

Super Premium Waveguide Assemblies 10.7-11.7

EWP90S

VSWR 1.05 (32.3)** 190SE 190SEM

55001-90 223306-100

Premium Waveguide Assemblies 10.2-10.7

EWP90-105

10.5-11.7

EWP90-105W

10.7-11.7

EWP90-107


Pressure Window

F090PC0240CB F090MH0600HB VSWR 1.06 (30.7)**

CPR90G PDR100 CPR90G PDR100 CPR90 PDR100

190DET 190DEMT – – 190DET 190DEMT

190SE 190SEM 190SE 190SEM 190SE 190SEM

55001-90 223306-100 55001-90 223306-100 55001-90 223306-100

290SC

55000A-75

190SE 190SEM –

55001-90 223306-100 55000A-75

F090PC0240CA F090MH0600HA F090PC0240CB F090MH0600HB F090PC0240CB F090MH0600HB VSWR 1.09 (27.3)**

WR75†††

10.7-11.7 Standard Waveguide Assemblies 10.2-11.7

* ** † ††

EW90

– Non-Tunable

CPR90G PDR100 WR75†††

190DE 190DEM –

F075PA0240BB VSWR 1.15 (23.1)** F090PC0240CS F090MH0600HS F075PA0240BS

Contact Andrew for information on other frequency bands. VSWR max., (R.L., dB). Up to 300 ft (90 m). The indicated maximum VSWR characteristics are guaranteed for factory assemblies and are typical for field assemblies. “Tunable” connectors ordered with factory assemblies are factory tuned. For detailed information on mating flanges, refer to pages 214-218. ††† Pressurizable cover flange.


88

Type No.

Description

Type No.


Other Accessories

Hanger Kit of 10, Recommended maximum spacing for outdoor installation is 3 ft (0.91 m)* 42396A-5 NEW! Snap-In Hanger Kit of 10. Recommended spacing for outdoor installation is 3 ft (0.91 m) EWSH-90 Hardware Kit of 10, 3/8" bolts, lock washers, nuts 3/4" (19 mm) long 31769-5 1" (25 mm) long 31769-1 Angle Adapter Kit of 10. Stainless steel 31768A Angle Adapter Kit of 10. Galvanized 3/8" Hardware 242774 Metric Hardware 242774-M Round Member Adapter Kit of 10. Stainless steel Member Diameter, in (mm) 1-2 (25-50) 31670-1 2-3 (50-75) 31670-2 3-4 (75-100) 31670-3 4-5 (100-125) 31670-4 5-6 (125-150) 31670-5 45° Adapter Kit of 10. Galvanized steel 42334 Threaded Rod Support, 3/8” rod, nuts, washers, ceiling bracket 12 in (305 mm) long, kit of 1 31771 12 in (305 mm) long, kit of 5 31771-4 24 in (610 mm) long, kit of 1 31771-9 24 in (610 mm) long, kit of 5 31771-6 Tower Standoff Kit of 10. 1 in (25 mm) standoff Member Diameter, in (mm) 0.75-1.5 (20-40) 30848-5 1.5-3.0 (40-75) 30848-4 3-4 (75-100) 30848-1 4-5 (100-125) 30848-2 5-6 (125-150) 30848-3 Tower Standoff Kit of 10. 2.5 in (60 mm) standoff Member Diameter, in (mm) 3-4 (75-100) 41108A-1 4-5 (100-125) 41108A-2 5-6 (125-150) 41108A-3

Flaring Tool Kit for connector attachment Splice Grounding Kit with factory attached, one-hole lug Grounding Kit with factory attached, two-hole lug Grounding Kit with field attachable crimp-on, one-hole lug Grounding Kit with field attachable crimp-on, two-hole lug Grounding Kit with field attachable screw-on lug Crimping Tool to field attach lug to Grounding Kit Hoisting Grip Bending Tool Kit. One each E and H Plane tool Connector Reattachment Kit Wall-Roof Feed Thru Waveguide Boot for Plates (below), 4 in (102 mm) dia. 5 in (127 mm) dia

204919 190DZ 204989-2 241088-2 204989-22 241088-7 204989-32 207270 29958 33586-1 33544-37 245314-90 WGB4-90 WGB5-90


For 4 in Boots

For 5 in Boots

1 1 2 3 4 6 8

204673-1 204673-2 – – 204673-4 – 204673-8

48940-1 – 48940-2 48940-3 48940-4 48940-6 –

* Standard conditions: 125 mph (200 km/h) survival wind velocity, 0.5 in (13 mm) radial ice. For other conditions see page 196.


Multiband Antennas Multiband antennas offer very high route capacity at minimum antenna/tower system cost. They also offer great system planning flexibility, especially for upgrades of existing frequency congested routes. Multiband antennas provide a second frequency band of operation using one antenna. Maximum channel expansion, with minimum increase in tower wind load, saves system installation time and cost. Size, weight, wind load characteristics and tower interface requirements are similar to other Andrew antennas of equivalent size. Our line of multiband antennas can, in general, be used as direct replacements for your existing single band antennas. Andrew also offers the combining networks and circulators you need to complete your multiband antenna system. The multiband antennas listed in this catalog are a small sampling of our total capabilities. We understand that your upgrade or expansion needs may be unique and we would like the opportunity to discuss your requirements with you. Contact Andrew for further information and help in designing your system.

Input Flange Information

92

Antenna Series

Antenna Input

-3444 -3456

CPR229G CPR229G

CPR229G CPR137G

-459 -465

CPR229G CPR229G

CPR137G CPR137G

-4456 -4459

CPR187G CPR187G

CPR137G CPR137G

-4464

CPR187G

CPR137G

-6477 -6511

CPR137G CPR137G

CPR112G CPR90G

-186 -4477 -6812

7/8” EIA CPR187G CPR137G

CPR137G CPR112G WR75


Multiband Antennas Type Number UMX

Diameter ft (m) Band

RPE Number(s)

Regulatory Compliance U.S. FCC ETSI ETSI 101 74 78 Class Gain

Low

Gain, dBi Mid-Band

Top

Cross Beamwidth Pol. Degrees Disc., dB

F/B Ratio dB


Ultra High Performance Multiband 4-Port Antennas Antenna Inputs: See page 92

3.4-3.9 GHz and 4.4-5.0 GHz UMX10-3444 10 3.4 4142 4143 (3.0) 4.4 4144 4145 UMX12-3444 12 3.4 4154 4155 (3.7) 4.4 4156 4157 UMX15-3444 15 3.4 4166 4167 (4.6) 4.4 4168 4169 3.4-3.9 GHz and 5.6-6.2 GHz UMX10-3456 10 3.4 4150 4151 (3.0) 5.6 4152 4153 UMX12-3456 12 3.4 4162 4163 (3.7) 5.6 4164 4165 UMX15-3456 15 3.4 4174 4175 (4.6) 5.6 4176 4177 3.7-4.2 GHz and 5.925-6.425 GHz UMX10-459* 10 3.7 4102 (3.0) 5.9 4104 UMX12-459* 12 3.7 4105 (3.7) 5.9 4107 3.58-4.20 GHz and 6.425-7.125 GHz UMX10-465** 10 3.5 4357 4358 (3.0) 6.4 4360 4361 UMX12-A465**12 3.5 4108 4109 (3.7) 6.4 4110 4111 4.40-5.00 GHz and 5.6-6.2 GHz UMX10-4456 10 4.4 4146 4147 (3.0) 5.6 4148 4149 UMX12-4456 12 4.4 4158 4159 (3.7) 5.6 4160 4161 UMX15-4456 15 4.4 4170 4171 (4.6) 5.6 4172 4173 4.40-5.00 GHz and 5.925-6.425 GHz UMX8-4459 8 4.4 3310 3311 (2.4) 5.9 3313 3315 UMX10-4459 10 4.4 3324 3325 (3.0) 5.9 3327 3329 UMX12-4459 12 4.4 3330 3331 (3.7) 5.9 3332 3333 4.40-5.00 GHz and 6.425-7.125 GHz UMX8-4464 8 4.4 4284 4285 (2.4) 6.4 4286 4287 UMX10-4464 10 4.4 4288 4289 (3.0) 6.4 4290 4291 UMX12-4464 12 4.4 4292 4293 (3.7) 6.4 4294 4295 UMX15-4464 15 4.4 4296 4297 (4.6) 6.4 4298 4299 6.425-7.125 GHz and 7.725-8.275 GHz UMX8-6477 8 6.4 4300 4301 (2.4) 7.7 4302 4303 UMX10-6477 10 6.4 4304 4305 (3.0) 7.7 4306 4307 UMX12-6477 12 6.4 4308 4309 (3.7) 7.7 4310 4311 UMX15-6477 15 6.4 4312 4313 (4.6) 7.7 4314 4315

– – B B A –

– – – – – –

– – – – – –

3 3 3 3 3 3

2 2 2 2 2 2

37.4 39.7 39.0 41.4 40.8 42.9

38.0 40.2 39.6 41.9 41.4 43.5

38.6 40.7 40.2 42.5 42.0 44.0

2.0 1.6 1.7 1.3 1.5 1.1

35 35 35 35 35 35

68 71 71 78 72 79

1.10 (26.4) 1.15 (23.1) 1.10 (26.4) 1.15 (23.1) 1.10 (26.4) 1.15 (23.1)

– B B A B A

– – – – – –

– – – – – –

2 2 2 2 2 2

2 2 2 2 2 2

36.6 40.7 38.5 42.6 40.3 44.5

37.2 41.2 39.1 43.1 40.9 45.0

37.8 41.3 39.7 43.2 41.5 45.1

2.1 1.2 1.8 1.0 1.6 1.0

35 35 35 35 35 35

70 73 71 76 74 77

1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1)

A A A A

– – – –

– – – –

3 3 3 3

2 2 2 2

38.4 42.8 40.7 44.9

39.0 43.1 41.3 45.3

39.4 43.5 41.5 45.7

1.8 1.1 1.5 0.9

30 30 30 30

75 80 74 80

1.06 (30.7) 1.06 (30.7) 1.06 (30.7) 1.06 (30.7)

A A A A

A – – A

– – – –

2 2 3 3

2 2 2 2

37.4 42.2 40.3 44.5

38.1 42.7 40.9 45.0

38.7 42.8 41.5 45.4

1.8 1.0 1.7 0.95

30 30 30 30

72 76 73 78

1.15 (23.1) 1.15 (23.1) 1.12 (24.9) 1.12 (24.9)

– – – – – A

– – – – – –

– – – – – –

2 2 2/3 – 3 3

2 2 2 – 2 2

39.7 41.8 41.4 43.4 43.1 45.0

40.2 42.2 41.9 43.8 43.7 45.4

40.8 42.6 42.5 44.2 44.2 45.8

1.6 1.2 1.3 1.0 1.2 1.0

35 35 35 35 35 35

75 76 74 77 75 78

1.15 (23.1) 1.10 (26.4) 1.15 (23.1) 1.10 (26.4) 1.15 (23.1) 1.10 (26.4)

– A A A – A

– – – – – –

– – – – – –

3 3 3 3 3 3

2 2 2 2 2 2

37.3 39.8 39.7 42.3 41.4 43.9

37.8 40.0 40.2 42.6 42.1 44.3

38.3 40.7 40.7 42.9 42.6 44.6

1.9 1.4 1.6 1.1 1.3 1.0

35 35 35 35 35 35

68 69 73 75 75 77

1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1)

– A A – B – A –

– A B – B – A –

– – – – – – – –

2 – 2 – 2/3 – 3 –

2 – 2 – 2 – 2 –

37.3 40.8 39.2 42.5 41.1 44.4 43.0 46.3

38.0 41.2 39.7 42.9 41.6 44.8 43.67 46.7

38.4 41.6 40.2 43.4 42.2 45.3 44.1 47.2

1.9 1.3 1.6 1.1 1.3 0.9 1.0 0.7

35 35 35 35 35 35 35 35

68 70 72 74 73 75 74 76

1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1)

A – A A A – A A

A – A A A – A A

– – – – – – – –

3 3 3 3 3 3 3 3

2 2 2 2 2 2 2 2

41.7 43.3 42.8 44.6 44.9 46.4 46.5 47.9

42.3 43.8 43.4 44.8 45.5 47.1 46.8 48.2

42.7 44.0 43.8 45.0 45.9 47.3 47.0 48.5

1.3 1.1 1.0 0.8 0.7 0.6 0.7 0.6

35 35 35 35 35 35 35 35

70 73 74 76 75 77 76 78

1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1) 1.15 (23.1)

Reference ETSI Document EN300833 for 3 to 60 GHz * 0.5 lb/in2 (3.5 kPa) maximum ** 5 lb/in2 (35 kPa) maximum



93

Multiband Antennas Type Number

Diameter ft (m) Band

RPE Number(s)

Regulatory Compliance U.S. FCC ETSI ETSI 101 74 78 Class Gain

Low

Gain, dBi Mid-Band

Top

Cross Beamwidth Pol. degrees Disc., dB

F/B Ratio dB


High Performance Multiband 2-Port Antennas (Single Polarized each band, Orthogonal Polarized) Antenna Inputs: See page 92

HP

1.85-1.99 GHz and 6.425-7.125 GHz HP8-186** HP10-186**

8 (2.4) 10 (3.0)

1.8 6.4 1.8 6.4

3960 3961 3962 3963 3964 3965

A B A B

– A – A

– – – –

2 2 2 2

– 2 – 2

30.4 41.5 32.4 42.7

30.7 41.9 32.7 43.0

31.0 42.4 33.0 43.4

4.3 1.3 3.7 1.0

28 30 28 30

51 69 54 71

1.15 (23.1) 1.10 (26.4) 1.15 (23.1) 1.10 (26.4)

4.4-5.0 GHz and 7.725-8.5 GHz HP8-4477

8 (2.4)

4.4 7.7

815 816

– –

– –

– –

3 3

2 2

38.2 42.8

38.7 43.1

39.3 43.4

2.0 1.2

35 35

64 71

1.20 (20.8) 1.15 (23.1)

HP10-4477

10 (3.0)

4.4 7.7

811 812

– –

– –

– –

2 2

2 2

40.3 44.2

40.6 44.5

41.2 44.7

1.6 0.8

35 35

67 74

1.20 (20.8) 1.15 (23.1)

HP12-4477

12 (3.7)

4.4 7.7

813 814

– –

– –

– –

2 3

2 2

42.0 46.4

42.4 46.7

43.1 46.9

1.3 0.7

35 35

69 78

1.20 (20.8) 1.15 (23.1)

A A A A B A

– – – – – –

– – – – – –

2 2 3 2 3 –

2 2 2 2 2 –

40.9 44.3 42.7 46.1 44.3 46.9

41.3 44.7 43.0 45.8 44.7 47.3

41.6 45.1 43.2 46.2 45.0 47.7

1.4 0.8 1.1 0.7 0.9 0.5

35 25 30 25 28 25

65 70 72 72 72 72

1.06 (30.7) 1.10 (26.4) 1.06 (30.7) 1.10 (26.4) 1.06 (30.7) 1.10 (26.4)

– –

– –

– –

– –

– –

41.6 44.3

41.9 44.7

42.3 45.1

1.3 0.8

32 25

65 70

1.06 (30.7) 1.10 (26.4)

4.4 1.3 3.7 1.0

18 30 20 30

39 49 42 52

1.15 (23.1) 1.10 (26.4) 1.15 (23.1) 1.10 (26.4)

30 15 30 10

53 54 59 60

1.10 (26.4) 1.15 (23.1) 1.10 (26.4) 1.15 (23.1)

5.925-6.425 GHz and 10.7-11.7 GHz HP8-611* HP10-611* HP12-611*

8 (2.4) 10 (3.0) 12 (3.7)

5.9 10.7 5.9 10.7 5.9 10.7

3038 3040 3049 3050 3046 3048

6.425-7.125 GHz and 10.7-11.7 GHz HP8-6511*

8 (2.4)

6.4 10.7

2387 2392

Standard Multiband 3-Port Antennas (2 GHz Single Polarized, 6 GHz Dual Polarized) Antenna Inputs: See page 92

P

1.85-1.99 GHz and 6.425-7.125 GHz P8-186** P10-186**

8 (2.4) 10 (3.0)

1.8 6.4 1.8 6.4

3945 3946 3947 3950 3951 3952

A B A B

– B A B

– – – –

– – 2 –

– – – –

30.5 41.6 32.5 43.7

30.8 42.0 32.8 43.4

31.1 42.5 33.1 43.8

Standard Multiband 2-Port Antennas (Both Bands Single Polarized, Orthogonal Polarization) Antenna Inputs: See page 92

P

6.875-7.125 GHz and 12.70-13.25 GHz P8-6812 P10-6812

8 (2.4) 10 (3.0)

6.8 12.7 6.8 12.7

1093 1094 1095 1096

– B – B

B B A B

– B – B

1 – 1 –

2 – 2 –

42.2 44.6 42.8 44.7

42.4 43.1 43.0 43.1

42.5 42.2 43.1 40.7

1.3 1.1 1.2 1.1

Reference ETSI Document EN300833 for 3 to 60 GHz * 5 lb/in2 (35 kPa) maximum ** 2 lb/in2 (14 kPa) maximum

94


Antenna Mechanical Specifications Mounting Information All microwave antennas listed on pages 51-94, except UMX-459 series, include a mount for attachment to a vertical pipe. Standard mounting information is summarized in the table on page 96. Special purpose mounts are described on page 122. Dimensional information and illustrations for installation planning are presented on pages 97-110. Mounting pipe. Vertical tower mounts attached to a tower supported vertical pipe of the diameter specified on page 96. The mounting pipe is not included with the antenna. It is normally purchased as part of the tower. Mount construction. Structural members are hot-dip galvanized steel or aluminum. Hardware. Fixed hardware is hot-dip galvanized steel. Adjusting hardware, including adjusting rods, is stainless steel. Azimuth and elevation adjustments. The adjustment ranges are indicated in the table on page 96. Some mounts, as noted in the table, use a swivel clamp for azimuth adjustment. Adjustment range for these is 360 degrees. All mounts have threaded fine elevation adjustment, except those for the 4 ft (1.2 m) GRIDPAK® and the Mini-GRIDPAK® antennas. Side struts. Some antennas include one or two side struts. The number supplied with each antenna is indicated in the table on page 96. Where one side strut is supplied, it includes a stainless steel threaded rod fine azimuth adjustment. Where two side struts are supplied, one is adjustable (has fine azimuth adjustment) and the other is fixed (adjustable but without fine azimuth adjustment). Refer to page 97 for information on side strut positioning.



95

Vertical Tower Mounts The vertical tower mounts listed below are included as part of all new antennas. Mount type numbers are shown for ordering replacement mounts.

Replacement Mount Type Number Metric Standard Hardware

Mounting Pipe Dia. in (mm)

Center Offset* in (mm)

Fine Azimuth Adjustment Degrees

Fine Elevation Adjustment Degrees

Side Struts Included

4 (1.2)

T6MSB

4.5 (115)

5.4 (137)**

±5

±5

–

6 (1.8)

T6MSC

4.5 (115)

5.4 (137)**

±5

±5

1

Antenna Size, ft (m) Shielded Antennas

8 (2.4)

T10MSB

4.5 (115)

8.0 (200) left*

±5

±5

2

10 (3.0)

T10MSB

4.5 (115)

8.0 (200) left*

±5

±5

2

12 (3.7)

T12MSA††

4.5 (115)

8.5 (215) left*

±5

±5

2

15 (4.6)

Integral

4.5 (115)

8.0 (200) right*

±5

±3.6

1

T6MSB

4.5 (115)

5.4 (137)**

±5

±5

–

46770A-2

4.5 (115)

5.4 (137)**

***

±5

–

T6MSB

4.5 (115)

5.4 (137)**

±5

±5

–

Standard and Focal Plane Antennas 4 (1.2)‡ 4

(1.2)‡‡

6 (1.8)‡ 6

(1.8)‡‡

46770A-2

4.5 (115)

5.4 (137)**

***

±5

–

8 (2.4)

T10MSB

4.5 (115)

8.0 (200) left*

±5

±5

1

10 (3.0)

T10MSB

4.5 (115)

8.0 (200) left*

±5

±5

1

12 (3.7)

T12MSA

4.5 (115)

8.5 (215) left*

±5

±5

2

15 (4.6)

Integral

4.5 (115)

8.0 (200) right*

±5

±3.6

1

4 (1.3)

Integral

4.5 (115)

6.88 (175)

***

±15

–

6 (2)

140854

4.5 (115)

6.88 (175)

***

±5

–

8 (2.4)

GRIDPAK® Antennas

140855

4.5 (115)

6.88 (175)

±5

±5

1

10 (3)

140856

4.5 (115)

6.88 (175)

±5

±5

1

13 (4)

140857

4.5 (115)

6.88 (175)

±5

±5

2

* With respect to the mounting pipe viewed from the rear of the antenna. Can be reversed by inverting the mount or antenna. ** Can be offset right or left without inverting the mount or antenna. *** 360° azimuth capability, no fine adjustment. †† UHX12-59 includes a bottom strut and requires a 10 ft (3 m) long mounting pipe. ‡ Applies to antennas 3.5 GHz and higher. ‡‡ Applies to antennas 2.7 GHz and lower, except for FP antennas which use the T6MSB mount. Note: Integral mounts consist of multiple type numbers. Contact Andrew for type numbers.

96


Antenna/Tower Interface Dimensional information and illustrations for installation planning are presented on the following pages.

Side Strut Positioning

Mount or Ring (Inboard)

Reflector Edge (Outboard)

Side Strut Positioning For maximum wind load capacity, side struts should be installed straight back to the tower. When this is not possible, the following guidelines apply:

Attachment Point on Antenna Both Struts Shown Parallel to Antenna Boresight Axis

When only one side strut is supplied, its angle should not exceed ±25° in the horizontal plane and ±5° in the vertical plane. See illustration for “adjustable strut”. For antennas with two side struts, the adjustable strut can be lowered or raised 5° from horizontal. The fixed side strut can be lowered or raised 25°. In the horizontal plane, both struts can be positioned at an angle up to 25°. See illustration at right. Further, the strut closest to the mounting pipe may be positioned at an angle up to 35°, provided the sum of the angles for both struts does not exceed 50°.

5°

25°

5°

25°

Adjustable Strut ±25 Horizontal Plane ±5 Vertical Plane

25°

25°

Fixed Strut ±25 Horizontal Plane ±25 Vertical Plane

Feed Orientation All Andrew solid parabolic antennas are fed from the center of the reflector and include polarization adjustment. The polarizations are clearly marked with arrows on the feed mounting hub. For single polarized antennas, the arrow is positioned up or down for vertical polarization and right or left for horizontal polarization. See illustrations.

Vertically Polarized Antenna

The installer must be advised of the proper feed orientation on all ultra high performance antennas and the proper polarization for single-polarized antennas.


Side View

Rear View

Dual polarized, waveguide fed antennas have both input flanges in the same plane to ease the attachment of waveguide. One input signal is rotated 90° inside the feed horn to provide cross polarization. UHX® high performance antennas have asymmetrical patterns with lower sidelobe levels on one side. For these antennas, RPEs are prepared for the full 360°. The frequency coordinator can use the better half of the radiation pattern on either the right or the left side of the antenna to reduce potential interference. HSX and UHX feed hubs use red to identify the better side. This side can be placed either right or left or boresight. Therefore, it is necessary for the frequency coordinator to specify “red right” or “red left” feed position.

Side View

Rear View

Horizontally Polarized Antenna

Side View

Rear View

Applies to: PXL-17 and -19 series, PX6 (except -107 -22 and -127), PXL6 (except -107, -122 and -127) PXL10-37, PXL8-37

Dual Polarized Antennas. Applies to Specified Types

Rear View Side View

UHX Waveguide Red Right

UHX Waveguide Red Left

UHX Coaxial Red Right

UHX Coaxial Red Left

High Performance and Standard

Dual Polarized Antennas. Except Those Specified Above.


97

Feed Installation

36"

Mounting Pipe

12"

12"

Clear space required behind reflector for routing and attachment of transmission line.

Normal Mount

Reversing the Feed Offset It is recommended that a cylindrical clear space of 12 in (305 mm) diameter by 36 in (915 mm) long be provided behind the center of the antenna to permit proper routing and attachment of the transmission line. Tower members directly behind the feed will interfere with the routing of the HELIAX® elliptical waveguide or coaxial cable to the feed. If there are interfering members behind the center of the antenna when mounted normally, it is possible to reverse the feed offset to position the feed on the other side of the mounting pipe.

36" 12"

Center Offset

Most feeds are designed to be originally installed from the front of the antenna. However, single-polarized feeds (except -59, -65, -70, -71, -77 series) and most dual polarized -105, -107, -122, -127, -130, -144, -180, -220 series feeds (except HPX()-105A, UHX()-107 and UHX()127H) can be replaced from the back of the antenna. All other feeds, including dual band feeds, must be inserted from the front of the antenna before the radome is attached.

Inverted Mount

The antenna mount can be inverted to change the offset of the feed for all 8, 10 and 12-ft antennas. Reflectors used on these antennas are designed to accommodate both standard and inverted mounting. To shift the offset of 1-ft, 2-ft and 15-ft antennas, the entire antenna is inverted. The offset for 4-ft and 6-ft antennas can be shifted without inverting the mount or antenna. The installer should be advised which antennas require inverted mounting prior to assembly and the antennas should be clearly identified prior to lifting.

Normal and Inverted Mounts. Applies to all 8, 10 and 12 ft antennas.

98


Feed Dimensions

Top View

G

A

F E

15 ft Antenna or 6-12 ft Antenna with Inverted Mount

B D

Mounting Pipe

C

Applies to waveguide and coaxial, single and dual-polarized, except UMX® antennas

Rear View

The dimensions presented below are for use in planning transmission line routing for waveguide, coaxial, singlepolarized and dual-polarized feeds.

Dimensions D, F and G, in (mm) Antenna Type and Size, ft (m)

D

F

G

5.4 (140) 5.4 (140) 8 (205) 8.5 (215) - 8 (-205)

14.5 (370) 11.75 (298) 13 (330) 13 (330) 15.25 (387)

0.75 (19) -0.6 (-15) 1.1 (28) 0.5 (13) 8.1 (206)

5.4 (135) 5.4 (135) 8 (205) 8.5 (215) -8 (-205)

11.75 (298) 11.75 (298) 13 (330) 13 (330) 15.25 (387)

0.75 (19) -0.6 (-15) 1.1 (28) 0.5 (-13) 8.1 (206)

Shielded Antennas

Dimensions A, B, C and E A = 4.5 in (115 mm) B = 3 in (76 mm) C = 1.5 in (38 mm) E = F - (G + A)

4 (1.2) 6 (1.8) 8 and 10 (2.4 and 3.0) 12 (3.7) 15 (4.6) Standard Antennas 4 (1.2) 6 (1.8) 8 and 10 (2.4 and 3.0) 12 (3.7) 15 (4.6)



99

2 ft Standard Antenna

D

A

C

B

E F

G

Dimensions in Inches (mm) Antenna Size, ft (m) 2 (0.6)

100

A

B

C

D

E

F

G

25.0 (637)

21.0 (541)

4.3 (108)

11.5 (292)

4.3 (110)

8.7 (220)

1.6 (42)


4 and 6 ft Shielded Antennas

A Top View B

D

C

Side View

K

Attachment Point for Adjusting Side Strut (6 ft Antennas) and Optional Side Strut (4 ft Antennas)

L

O

N

M

E

G

Azimuth Adjustment Assembly (4 ft only)

F

H

Rear View

I Bolt Circle Diameter

J

Dimensions in Inches (mm) Antenna Size, ft (m)

A

B

C

D

E

F

G

H

4 (1.2) 6 (1.8)

52.4 (1330) 76.5 (1945)

23.1 (585) 35.25 (895)

3.5 (90) 3.75 (95)

7.75 (195) 13.25 (335)

19.6 (500) 19.6 (500)

6.9 (175) 6.9 (175)

2.25 (55) 2.25 (55)

26.5 (675) 26.5 (675)

I

J

K

L

M

N

O

4 (1.2)

30.6 (780)

6.4 (160)

–

11.62 (295)

29 (735)

21.5 (545)

19.25 (490)

6 (1.8)

30.6 (780)

6.4 (160)

84.75 (2155)

11.62 (295)

29 (735)

21.5 (545)

19.25 (490)



101

4 and 6 ft Standard and Focal Plane Antennas Optional Molded Radome

A

B

C

Top View

E Attachment Point for Optional Side Strut

K

D

Note: Except for FP Type, 2.7 GHz and Below Antennas Do Not Have Fine Azimuth Adjustments

Rear View

L F

M

G

H J Side View

102

Bolt Circle Diameter

I

4.5 in (115 mm) Diameter Mounting Pipe (not included)


4 and 6 ft Standard and Focal Plane Antennas Dimensions in Inches (mm) Antenna Size, ft (m)

A

B

C

D

E

F

G

Standard Antennas 4 (1.2)

52.4 (1330)

18.5 (470)

7.75 (195)

26.5 (675)

21.5 (545)

7.75 (195)

2.25 (60)

6 (1.8)

76.3 (1940)

27.75 (690)

13.2 (335)

26.5 (675)

21.5 (545)

7.75 (195)

2.25 (60)

4 (1.2)

50.75 (1290)

23.3 (590)

9.5 (245)

26.5 (675)

21.5 (545)

7.75 (195)

2.25 (60)

6 (1.8)

76 (1930)

13.46 (340)

17.5 (445)

26.5 (675)

21.5 (545)

7.75 (195)

2.25 (60)

H

I

J

K

L

M

4 (1.2)

26.5 (675)

5 (137)

30.6 (780)

11.6 (295)

30.75 (780)

19 (480)

6 (1.8)

26.5 (675)

5 (137)

30.6 (780)

11.6 (295)

30.75 (780)

19 (480)

4 (1.2)

26.5 (675)

5 (137)

30.6 (780)

11.6 (295)

30.75 (780)

19 (480)

6 (1.8)

26.5 (675)

5 (137)

30.6 (780)

11.6 (295)

30.75 (780)

19 (480)

Focal Plane Antennas

Standard Antennas

Focal Plane Antennas



103

8, 10 and 12 ft Shielded, Standard and Focal Plane Antennas

Top View Optional Molded Radome (Standard and Focal Plane Antennas)

B A

D

C

E

25°

25°

Fixed Side Strut 25°

25° Adjusting Side Strut

F

Adjusting Strut Attachment Point

G

H

I

N T

Q

P J

R

K Fixed Strut Attachment Point for 8, 10, and 12 ft Shielded and 12 ft Standard/FP Antennas

M S U

Optional Bottom Strut Attachment Point

Side View

8, 10 and 12 ft Shielded and 12 ft Standard/FP Antennas (strut does not attach here, except optional side strut)

Bolt Circle Diameter

Optional Bottom Strut Bracket for 8, 10 and 12 ft One-Piece Reflectors

L Pipe 4-1/2" Diameter (115mm) (not included)

Optional Side Strut Attachment Point for 8 and 10 ft Standard/FP Antennas. Use Type 520568 Bracket Kit (Order Separately)

Optional Bottom Strut Bracket for 8, 10 and 12 ft Two-Piece Reflectors

Rear View

104


8, 10 and 12 ft Shielded, Standard and Focal Plane Antennas Dimensions in Inches (mm) Antenna Size, ft (m) A B C Shielded Antennas (Except Dual Beam with Extended Mount) 8 (2.4) 100.5 (2555) 106.5 (2705) 41.75 (1060) 10 (3.0) 124.5 (3160) 130.5 (3315) 31.5 (800)** 12 (3.7) 148.5 (3775) 154.5 (3915) 43 (1090)* Dual Beam Antennas with Extended Mount (Sum and Difference) 8 (2.4) 100.5 (2555) 106.5 (2705) 41.75 (1060) 10 (3.0) 124.5 (3160) 130.5 (3315) 31.5 (800) 12 (3.7) 148.5 (3775) 154.5 (3915) 43 (1090) Focal Plane Antennas 8 (2.4) 100.5 (2555) 106.5 (2705) 26.5 (670) 10 (3.0) 124.5 (3160) 130.5 (3315) 36.25 (920) 12 (3.7) 148.5 (3775) 154.5 (3915) 40.5 (1030) Standard Antennas 8 (2.4) 100.5 (2555) – 36 (915) 10 (3.0) 124.5 (3160) – 32.75 (830) 12 (3.7) 148.5 (3775) 154.5 (3925) 36.5 (930) H I J Shielded Antennas (Except Dual Beam with Extended Mount) 8 (2.4) 26.75 (680) 10.75 (275) 10.75 (275) 10 (3.0) 26.75 (680) 10.75 (275) 10.75 (275) 12 (3.7) 32.75 (835) 15.75 (400) 14 (355) Dual Beam Antennas with Extended Mount (Sum and Difference) 8 (2.4) 29.75 (755) 7.75 (195) 10.75 (275) 10 (3.0) 29.75 (755) 7.75 (195) 10.75 (275) 12 (3.7) 35.25 (895) 13.25 (335) 14 (355) Focal Plane Antennas 8 (2.4) 26.75 (680) 10.75 (275) 10.75 (275) 10 (3.0) 26.75 (680) 10.75 (275) 10.75 (275) 12 (3.7) 32.75 (835) 15.75 (400) 14 (355) Standard Antennas 8 (2.4) 26.75 (680) 10.75 (275) 10.75 (275) 10 (3.0) 26.75 (680) 10.75 (275) 10.75 (275) 12 (3.7) 32.75 (835) 15.75 (400) 14 (355) N P Q Shielded Antennas (Except Dual Beam with Extended Mount) 8 (2.4) 13 (330) 37.5 (950) 35.25 (895) 10 (3.0) 13 (330) 37.5 (950) 35.25 (895) 12 (3.7) 13 (330) 48.25 (1225) 45 (1145) Dual Beam Antennas with Extended Mount (Sum and Difference) 8 (2.4) 20 (510) 37.5 (950) 35.25 (895) 10 (3.0) 20 (510) 37.5 (950) 35.25 (895) 12 (3.7) 20 (510) 48.25 (1225) 45 (1145) Focal Plane Antennas 8 (2.4) 13 (330) 37.5 (950) 35.25 (895) 10 (3.0) 13 (330) 37.5 (950) 35.25 (895) 12 (3.7) 13 (330) 48.25 (1225) 45 (1145) Standard Antennas 8 (2.4) 13 (330) 37.5 (950) 35.25 (895) 10 (3.0) 13 (330) 37.5 (950) 35.25 (895) 12 (3.7) 13 (330) 48.25 (1225) 45 (1145) * C = 57-1/4 in (1455 mm) for UHX12-59

D

E

F

G

5 (125) 5.5 (140) 5.75 (145)

15.5 (395) 24.25 (615) 27 (685)

59.75 (1520) 71.75 (1820) 84.25 (2140)

43.25 (1110) 55.75 (1415) 67.25 (1710)

5 (125) 5.5 (140) 5.75 (145)

15.5 (395) 24.25 (615) 27 (685)

62.75 (1595) 74.75 (1900) 86.75 (2205)

40.25 (1020) 52.75 (1340) 64.75 (1645)

5 (125) 5.5 (140) 5.75 (145)

21.5 (545) 29.5 (750) 35.5 (905)

59.75 (1520) 71.75 (1820) 84.25 (2140)

43.25 (1110) 55.75 (1415) 67.25 (1710)

5 (125) 5.5 (140) 5.75 (145) K

15.5 (395) 24.25 (615) 27 (685) L

– 71.75 (1820) 84.25 (2140) M

– – 67.25 (1710)

37.5 (950) 37.5 (950) 47.5 (1205)

8 (200) 8 (200) 8.5 (215)

43.25 (1100) 43.25 (1100) 56.25 (1430)

37.5 (950) 37.5 (950) 47.5 (1205)

11.0 (280) 11.0 (280) 11.0 (280)

43.25 (1100) 43.25 (1100) 56.25 (1430)

37.5 (950) 37.5 (950) 47.5 (1205)

8 (200) 8 (200) 8.5 (215)

43.25 (1100) 43.25 (1100) 56.25 (1430)

37.5 (950) 37.5 (950) 47.5 (1205) R

8 (200) 8 (200) 8.5 (215) S

43.25 (1100) 43.25 (1100) 56.25 (1430) T

24.5 (625) 24.5 (625) 31 (790)

27.25 (695) 39.25 (1000) 44.75 (1140)

120 (3050) 120 (3050) 120 (3050)

60 (1525) 60 (1525) 60 (1525)

24.5 (625) 24.5 (625) 31 (790)

27.25 (695) 39.25 (1000) 44.75 (1140)

120 (3050) 120 (3050) 120 (3050)

60 (1525) 60 (1525) 60 (1525)

24.5 (625) 24.5 (625) 31 (790)

27.25 (695) 39.25 (1000) 44.75 (1140)

120 (3050) 120 (3050) 120 (3050)

60 (1525) 60 (1525) 60 (1525)

24.5 (625) 24.5 (625) 31 (790)

27.25 (695) 39.25 (1000) 44.75 (1140)

120 (3050) 120 (3050) 120 (3050)

60 (1525) 60 (1525) 60 (1525)

U

** C = 37.0 in (940 mm) for HDX10-107



105

15 ft Shielded and Standard Antennas Top View A

B C

D

Adjustable Side Strut Attachment Point

I F

K

H

J

G

Side View

E Rear View

Dimensions in Inches (mm) Antenna Size, ft (m) 15 (4.6)

106

A

B

C

D

E

F

G

H

I

J

K

184.5 (4685)

49.0 (1245)

5.3 (135)

34.0 (865)

51.5 (1310)

87 (2210)

8 (200)

23.5 (595)

23.5 (595)

76.0 (1930)

108 (1240)


Forces Produced by Microwave Antennas Wind Forces The axial, side and twisting moment forces tabulated below and on page 112 are maximum values exerted on a supporting structure. They are the result of wind from the most critical direction for each parameter. The individual maximums may not occur simultaneously. All forces are referenced to the antenna mounting pipe. The components are: • Axial Force, FA • Side Force, FS • Twisting Moment, MT

Parabolic Antennas Antenna Axis

Andrew software, included on the Powertools CD-ROM and downloadable from www.andrew.com, calculates the forces produced by winds from any angle.

Wind

FA MT FS

Top View

See page 44 for more information about Powertools.

Wind Forces at 125 mph (200 km/h) Antenna Dia. ft (m) 4 (1.2) 6 (1.8) 8 (2.4) 10 (3.0) 12 (3.7) 15 (4.6) Other Shielded, With Planar Radome UHX10-59 10 (3.0) UMX10-459 10 (3.0) HDX10-107 10 (3.0) UHX12-59 12 (3.7) UMX12-459 12 (3.7) UMX12-465 12 (3.7) Focal Plane and PAR Series 4 (1.2) Antenna without Radome 6 (1.8) 8 (2.4) 10 (3.0) 12 (3.7) Focal Plane and PAR Series 4 (1.2) Antennas with Radome* 6 (1.8) 8 (2.4) 10 (3.0) Standard Antenna 4 (1.2) without Radome 6 (1.8) 8 (2.4) 10 (3.0) 12 (3.7) 15 (4.6) Standard Antenna 2 (0.6) with Radome 4 (1.2) 6 (1.8) 8 (2.4) 10 ((3.0) 12 (3.7) GRIDPAK® Antenna 4 (1.3) Without Ice KP Series 6 (2.0) 8 (2.4) 10 (3.0) 13 (4.0) Antenna Type Shielded Antenna With Planar Radome (Except “other shielded” shown below)

FA Max. lb 634 1427 2537 3964 5708 8919

FA Max. (N) 2821 6348 11284 17632 25390 39672

FS Max. lb 314 707 1257 1964 2827 4418

FS Max. (N) 1398 3144 5590 8734 12577 19652

MT Max. lb-ft -632 -1681 -3615 -6365 -10423 22000

MT Max. (N•m) -826 -2209 -4901 -8630 -14132 29828

α For MT Max -110 -110 -110 -110 -110 110

4000 4000 4040 5800 5760 5910 918 2065 3672 5737 8261 434 976 1736 2712 864 1944 3456 5400 7775 12149 109 434 976 1736 2712 3905 325 820 1180 1825 3135

17790 17790 17970 25800 25620 26290 4083 9187 16333 25520 36749 1930 4343 7720 12064 3843 8647 15372 24019 34587 54042 483 1930 4343 7720 12064 17372 1450 3650 5250 8120 13940

1910 1970 2065 3020 2830 3210 279 625 1115 1742 2509 267 685 1068 1669 236 531 943 1474 2122 3316 67 267 685 1068 1669 2403 190 430 600 1020 1750

8500 8760 9190 13430 12590 14280 1240 2790 4960 7749 11159 1188 2673 4751 7424 1049 2360 4196 6556 9441 14751 297 1188 2673 4751 7424 10691 840 1910 2670 4540 7780

-6880 -10100 -7260 -13610 13400 -15590 -705 -1936 -4247 -7608 -12575 540 1597 3714 6883 -647 -1597 -3945 -7084 -11728 24294 94 540 1597 3714 6883 11581 351 1342 2200 3869 8022

-9330 -13700 -9850 -18450 18170 -21140 -937 -2635 -5758 -10314 -17050 774 2309 5036 9333 -858 -2425 -5349 -9605 -15900 32938 128 774 2309 5036 9333 15702 475 1824 2990 5259 10903

-105 -105 -105 -105 105 -105 -125 -125 -125 -125 -125 90 100 99 99 -130 -130 -125 -125 -125 -125 -10 90 100 99 99 99 60 60 60 60 60

*PAR series use deep reflectors on 6 ft - 8 ft only.



111

Antenna Weight and Center of Gravity Center of Gravity

Parabolic Antenna

ZCG

For parabolic antennas, the center of gravity is referenced to the centerline of the antenna mounting pipe as illustrated. Dimension X, the transverse offset, can be found on pages 100 to 110. Dimension ZCG and antenna weights with and without ice are tabulated below.

Antenna Mounting Pipe X

Antenna Weight and Center of Gravity, Parabolic Antenna Including Mount and Side Struts Antenna Type

Antenna Dia. ft (m)

Without Ice Weight, lb (kg) ZCG, in (mm)

With 1/2" (12 mm) Radial Ice Weight, lb (kg) ZCG, in (mm)

Shielded Antenna One-Piece Reflector with Planar Radome (except “Other Shielded” shown below)

1 (0.3) 2 (0.6) 2.5 (0.8) 4 (1.2) 6 (1.8) 8 (2.4) 10 (3.0) 12 (3.7)

22.9 (10.4) 41 (18.5) 78 (35.5) 170 (77) 281 (127) 447 (203) 541 (245) 850 (386)

3.9 (98) 9.6 (244) 6.9 (175) 11.1 (282) 20.0 (508) 26.5 (673) 30.2 (767) 31.2 (792)

30.6 (13.9) 77 (35) 96 (43.5) 280 (127) 501 (227) 974 (430) 1234 (560) 1874 (850)

5.1 (130) 10.7 (272) 8.5 (215) 14.6 (371) 22.8 (579) 28.7 (729) 32.2 (818) 35.8 (909)

Shielded Antenna Two-Piece Reflector with Planar Radome

8 (2.4) 10 (3.0) 12 (3.7) 15 (4.6)

460 (209) 560 (254) 860 (390) 1780 (807)

27.0 (686) 30.7 (780) 31.8 (808) 51.4 (1306)

989 (449) 1254 (569) 1885 (855) 2777 (1260)

28.8 (732) 32.3 (820) 36.0 (914) 54.0 (1372)

Other Shielded, with Planar Radome VHP1 VHP2 VHP4 VHP6 HDX8S-59 UMX10-459 HDX10-107 HDX10S-59 UMX12-459 UMX12-465 UHX12-59 HDX12S-59

1 (0.3) 2 (0.6) 4 (1.2) 6 (1.8) 8 (2.4) 10 (3.0) 10 (3.0) 10 (3.0) 12 (3.7) 12 (3.7) 12 (3.7) 12 (3.7)

22.9 (10.4) 68 (31) 140 (64) 380 (173) 470 (213) 705 (320) 555 (252) 560 (254) 895 (406) 960 (435) 890 (404) 890 (404)

3.9 (98) 6.9 (175) 12.5 (317) 20.0 (508) 25.8 (655) 46.0 (1168) 30.7 (780) 29.6 (752) 44.0 (1118) 29.9 (759) 33.3 (846) 30.3 (770)

30.6 (13.9) 86 (39) 282 (128) 620 (282) 1010 (458) 1310 (594) 1275 (578) 1270 (576) 1660 (753) 2025 (919) 1815 (823) 1940 (880)

5.1 (130) 8.5 (215) 16.7 (424) 33.3 (848) 28.2 (716) 51.0 (1295) 32.7 (831) 32.0 (813) 49.0 (1245) 31.0 (787) 39.3 (998) 35.1 (892)

Standard Antenna One-Piece Reflector without Radome

2 (0.6) 4 (1.2) 6 (1.8) 8 (2.4) 10 (3.0) 12 (3.7)

14 (7) 104 (47) 143 (61) 251 (114) 317 (144) 540 (245)

6.5 (165) 7.0 (178) 10.0 (254) 13.5 (343) 18.0 (457) 19.0 (483)

58 (26) 175 (79) 294 (133) 536 (243) 784 (356) 1158 (525)

7.9 (201) 10.9 (277) 13.5 (343) 16.8 (427) 21.7 (551) 22.3 (566)

2 (0.6) 4 (1.2) 6 (1.8)

49 (22.3) 90 (41) 205 (93.2)

3.5 (88) 2.7 (38) 10 (254)

54.4 (24.3) 194 (88) 363 (165)

4.3 (110) 6.2 (157) 13.5 (343)

Standard Antenna One-Piece Reflector with Radome

2 (0.6) 4 (1.2) 6 (1.8) 8 (2.4) 10 (3.0) 12 (3.7)

17 (8) 119 (54) 162 (73) 304 (138) 402 (182) 654 (297)

8.7 (221) 10.0 (254) 13.7 (348) 19.8 (503) 25.8 (655) 26.9 (683)

81 (37) 189 (86) 321 (146) 621 (282) 916 (415) 1356 (615)

9.9 (251) 14.6 (371) 19.6 (498) 25.0 (635) 31.7 (805) 32.8 (833)

Standard Antenna Two-Piece Reflector without Radome

8 (2.4) 10 (3.0) 12 (3.7) 15 (4.6)

264 (120) 336 (152) 600 (272) 1240 (562)

14.0 (356) 18.5 (470) 19.6 (498) 32.3 (820)

550 (249) 804 (365) 1219 (553) 2269 (1029)

17.3 (439) 22.2 (564) 22.9 (582) 36.4 (925)

GRIDPAK® Antenna

4 (1.3) 6 (2) 8 (2.4) 10 (3) 13 (4)

51 (23) 198 (90) 282 (128) 418 (190) 517 (235)

10.0 (254) 14.5 (368) 16.0 (406) 21.5 (546) 25.5 (648)

Other Standard, One-Piece Reflector without Radome VP2 VP4 VP6

112

– – – – –

– – – – –


Side Strut Axial Forces Maximum axial forces produced on support structures by antenna side struts are tabulated below. In each case, the loads are the result of a 125 mph (200 km/h) wind from the most critical direction and each side strut is positioned at the most extreme angle permitted by the specifications on page 97. The forces are components of, not in addition to, the maximum forces which are referenced to the mounting pipe on page 111.

Top View

Typical Adjusting Side Strut

Typical Fixed Side Strut

Maximum Antenna Side Strut Axial Force, 125 mph (200 km/h) Wind Antenna Type Shielded Antenna (except “Other Shielded” shown below)

Size ft (m)

Adjustable Strut Force, lb (N)

Fixed Strut Force, lb (N)

6 (1.8) 8 (2.4) 10 (3.0) 12 (3.7) 15 (4.6)

2070 (9207) 958 (4261) 1320 (5871) 1799 (8001) 7921 (35233)

– 1265 (5627) 1987 (8838) 2585 (11498) –

10 (3.0) 10 (3.0) 12 (3.7) 12 (3.7)

1452 (6558) 4086 (18175) 2392 (10640) 4137 (18401)

2184 (9714) 4492 (19980) 3437 (15288) 4545 (20216)

Other Shielded Antennas UHX10-59 UMX10-459 UHX12-59 UMX12-459



113

Antenna Options All antenna orders require option codes to specify the details for your system. Most antennas include options for selecting feed input types, paint color, radome, packing, and environmental offerings. These option codes are unique characters placed before (prefix) or after (suffix) the base antenna type number. Prefix codes are optional. Suffix codes are required.

Prefix Option Codes The prefix option codes include special environmental options such as high wind and corrosive environment. For additional information about special environment antennas, request Bulletin 3522. High Wind Environment Options UHX10-59

125 mph (200 km/h)

WUHX10-59

155 mph (250 km/h)

SUHX10-59

200 mph (320 km/h)

High wind options that exceed the standard 125 mph (200 km/h) wind survival rating are available in 155 mph (250 km/h) and 200 mph (320 km/h) survival rating. These heavy duty antenna versions feature strong back structures for maintaining alignment accuracy in adverse and severe wind conditions. Use the “W” prefix for 155 mph (250 km/h), and the “S” prefix for 200 mph (320 km/h) survival ratings. Corrosive Environment Options The corrosive environment option is available for most antennas. This option provides long term protection in marine or salt and most industrial environments including chemical and fossil fuel areas. A special epoxy paint applied at the factory provides added protection. In addition, corrosion inhibiting compounds and protective sealants are applied during installation. Note: High wind and corrosive environment prefix codes are optional.

Suffix Option Codes

114

UHX10-59

Standard paint

EUHX10-59

Corrosive environment paint

WEUHX10-59

High wind and corrosive environment paint

Suffix option codes are required for your antenna order. The suffix option code is made up of three characters. The first character indicates the feed input type, the second character indicates the antenna color and applicable radome information, and the third character indicates the packing options.


Antenna Options The option code’s first character, indicating connector or flange type, has no default. You must specify a flange type for each antenna ordered. The remaining option codes, indicating antenna color, radome, and packing, are optional. If you do not specify a code for the second and third characters you will receive the default. Note: Not all connector and flange types listed are applicable for all antennas. Refer to the antenna input options listed in each antenna ordering table. Additional options available. Contact Andrew.

Type Number with Option Code: UHX10-59-P Description:

Antenna Input Option Codes

UHX10-59 antenna with CPR flange

Coaxial Applications Connector Type

Option Code

7/8" EIA

E

“F” Flange Female

F

7/16 DIN Female

H

Type N Female

N

Waveguide Applications Flange Type

Option Code

PBR

B

PDR

D

WR75

C

CPR

P

UG*

U

* Compatible with choke or cover

Type Number with Option Code:

UHX10-59-P3

Description:

UHX10-59 antenna with CPR flange, painted gray with white TEGLAR radome

Antenna Color/Radome Option Codes Antenna Color

Radome Type/Color*

Option Code

Gray

Hypalon/White

1

Gray

TEGLAR®/White

3

Gray

Not Available

7

Unpainted

Not Available

W (for GRIDPAK®)

Gray**

Molded/Gray

X

* All radomes listed have Andrew logo. ** UNIPAK includes the radome and antenna in a single container. Solid reflectors available for 2 ft to 10 ft, not available for 12 ft, 15 ft or any split two piece reflectors. For additional color information see pages 116-117. For additional radome information see pages 116-119.

Packing Option Codes Packing Standard Global Pack Standard Global Pack for Two-Piece Split Reflector or GRIDPAK®

Option Code A M


Type Number with Option Code:

UHX10-59-P3A

Description:

UHX10-59 antenna with CPR flange, painted gray with white TEGLAR radome, Standard Global Pack


115

Radomes

Radomes Radomes are available for most Andrew antennas. Radomes reduce wind loading to the tower while providing added protection for the feed from the elements. There are two types of radomes, flexible and molded. Flexible radomes are provided on shielded antennas and molded radomes are options to standard and focal plane antennas. All radomes have a standard minimum wind survival of 125 mph (200 km/h).

Hypalon is a rubber coated nylon material that is durable and suited for most normal environments. The standard color is white. Field painting is optional.

Flexible Radomes

TEGLAR® is a polymer coated fiberglass material that provides the greatest protection in harsh environments. A special version of the TEGLAR radome is available with high wind series antennas. The standard color is white. Optional colors are available. TEGLAR radomes cannot be field painted.

Flexible radomes are either Hypalon or TEGLAR® material. These materials are stretched and tensioned across the opening of the shield.* The radome flexes slightly in the wind, shedding ice and snow in most environments.

* FPHP antennas include molded radomes. 4 ft (1.2 m) TEGLAR radome is pre-tensioned.

Optional Colors

Aviation Orange

116

Green

Brown

Light Tan

Gray

Beige


Radomes

Molded Radomes Molded radomes are made from fiberglass or ABS plastic. They directly bolt to the reflector rim. The standard color is dark gray. Optional colors are available. Field painting is optional.

Optional Colors

Pre-Tensioned Radomes The new global offering for 4 ft (1.2 m) shielded antennas includes the pre-tensioned radome. This radome, made from TEGLAR® material is bonded to a support ring. The radome and ring are directly bolted to the shield assembly. Pre-tensioned radomes replace the previously offered spring tensioned design radomes.

Most other colors available on request

Aviation White

Aviation Orange

Radome Applications Antenna Types

Antenna Series

Included Radome

Standard Color

Optional Radomes

UHP®, UHX®, HDX, HSX

TEGLAR

white

–

UMX®

TEGLAR

white

–

High Performance

HP, HPX, HDH, HDV

Hypalon

white

TEGLAR

Standard

P, PX, PL, PXL, PAR

None

gray

Standard molded Extra strength molded, 10 and 12 ft (3.0 and 3.7 m)

FP, FPX

None

gray

Standard molded Extra strength molded, 10 and 12 ft (3.0 and 3.7 m)

Ultra High Performance UMX Multiband

Focal Plane



117

Radome Electrical Characteristics Planar Radomes. The electrical characteristics of the planar radome are incorporated into the electrical performance specifications of the shielded antenna. Molded Radomes. The use of a molded radome on standard (P-Series) or focal plane (FP-Series) antennas may slightly impact maximum antenna VSWR. Attenuation and system VSWR effects are listed in the table below. To determine the maximum VSWR across the band for the antenna/radome combination, add the figure from the table to the maximum antenna VSWR specification. 10 ft and 12 ft standard molded radomes are rated for 125 mph (200 km/h) while 4 ft, 6 ft and 8 ft standard radomes are rated for 150 mph (240 km/h); extra strength molded radomes for 10 ft and 12 ft which are rated for 150 mph (240 km/h) are also available.

Typical Molded Radome Attenuation and VSWR Radome Type

Diameter ft (m)

Attenuation, dB 11 GHz 13 GHz

2 GHz

6 GHz

8 GHz

0.1 0.1 0.1 0.1 0.2 0.2 0.3 0.03

0.4 0.4 0.5 0.6 0.9 1.0 1.2 1.4

0.6 0.7 0.9 1.0 1.3 1.3 1.5 1.7

1.0 1.2 1.4 1.5 1.8 1.9 2.0 2.0

0.1 0.1 0.1 0.2 0.2 0.1 0.2 0.2 0.3 0.3

0.4 0.5 0.6 0.9 1.0 0.4 0.8 0.9 1.2 1.4

– – – – – – – – – –

– – – – – – – – – –

Add to Antenna VSWR 2 GHz 6 GHz 11 GHz and above

15 GHz

18 GHz

1.2 1.5 1.7 1.8 2.1 2.2 2.2 2.3

1.5 2.0 2.1 2.2 2.5 2.6 2.6 2.6

2.7 2.9 2.9 – – – – –

0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02

0.03 0.03 0.03 0.03 0.03 0.03 0.03 0.03

0.05 0.05 0.03 0.03 0.03 0.03 0.03 0.03

– – – – – – – – – –

– – – – – – – – – –

– – – – – – – – – –

0.03 0.03 0.03 0.03 0.03 0.05 0.05 0.05 0.05 0.05

0.03 0.03 0.03 0.03 0.03 0.05 0.05 0.05 0.05 0.05

– – – – – – – – – –

Standard Antenna Radomes Standard Standard Standard Standard Standard Standard Extra Strength Extra Strength

2 (0.6) 4 (1.2) 6 (1.8) 8 (2.4) 10 (3.0) 12 (3.7) 10 (3.0) 12 (3.7)

Focal Plane Antenna Radomes Standard Standard Standard Standard Standard Extra Strength Extra Strength Extra Strength Extra Strength Extra Strength

118

4 (1.2) 6 (1.8) 8 (2.4) 10 (3.0) 12 (3.7) 4 (1.2) 6 (1.8) 8 (2.4) 10 (3.0) 12 (3.7)


Radome Ordering Information Current Model Antennas

Older Model Antennas

Shielded antennas. All shielded antennas include a Hypalon or TEGLAR® radome. Several antennas (HP and HPX) can be upgraded to TEGLAR for a minimal fee.

Radome clip kits. Standard antennas (P-Series) reflector with a rolled rim manufactured prior to: September 1987 for 4 ft (1.2 m) and 10 ft (3.0 m), February 1991 for 8 ft (2.4 m), and July 1991 for 6 ft (1.8 m) diameters require the additional clip kit listed in the table below.

Standard and focal plane antennas. Standard and focal plane antennas* do not include a molded radome but in order to reduce wind loading, one can be added to the antenna crate. The radome can be shipped with the antenna using the UNIPAK shipping option. Specify the type number from the table below. * FPHP antennas include radome

Pre-tensioned radomes. For shielded 4 ft (1.2 m), TEGLAR spring-type attachment radomes have been replaced by pre-tensioned TEGLAR radomes that are directly attached to the rim of the shield. Field drilling is required. Type Number 520093-9 Standard molded radomes. The 2 ft (0.6 m) standard molded radome has changed in design. For antennas shipped prior to June 1998, request Type Number R2E. Flexible planar radome replacement kits. These kits include one radome and hardware to replace an existing Andrew planar radome. Specify the type number from the table below. Edge protection kit for TEGLAR® radomes. This kit prevents damage to the untensioned radome edge between J-bolt anchor points caused by unusually high gusting winds. Kit includes stainless steel edge protector strips and attachment hardware. The strips are fastened in pairs to form a band around the edge of the radome. Specify the type number from the table below.

Radome Ordering Information Reflector Diameter ft (m)

Standard Molded

Extra Strength Molded

Focal Plane Extra Strength Molded Focal Plane Molded

Clip Kit

Hypalon

TEGLAR

Edge Protection Kit (TEGLAR)

2 (0.6)

R2E, VR2, VR2-WH

–

–

–

–

–

207150***

–

4 (1.2)

R4E

R4E

FR4

FR4-E

207844-1

–

207106** 520093-9*

–

6 (2.0)

R6E

R6E

FR6

FR6-E

207844-2

520434-1

45665-1

205866-3

8 (2.4)

R8F

R8F

FR8

FR8-E

207844-3

520434-2

45665-2

205866-4

10 (3.0)

R10G

39193B

FR10

FR10-E

207844-4

520434-3

45665-3

205866-1

12 (3.7)

R12F

39194

FR12

FR12-E

–

520434-4

45665-4

205866-2

15 (4.6)

–

–

–

–

–

520434-5

45665-5

205866-5

* Pre-tensioned radome ** Spring tensioned radome for older style antennas ***Except 2 ft is gray



119

GRIDPAK® disassembled

One piece reflector

Reflector Type

Standard and Optional Reflectors

One and Two-Piece Antennas. Antennas are supplied with one-piece reflectors or with two-piece reflectors split through the center and bolted together at the site. GRIDPAK® and Mini-GRIDPAK antennas are supplied with reflectors that are completely disassembled. Standard and optional reflector types are dependent on antenna size and type. Refer to the table.

Special Purpose Mounts In addition to the standard mounts listed on page 96, Andrew can provide horizontal and vertical tilt mounts and other mount options to meet most special requirements. Contact Andrew for further information.

122

Two piece reflector

Antenna Diameter

Reflector Type Standard

Optional

Solid Antennas Standard, High Performance and Ultra High Performance 2-6 ft (0.3-1.8 m)

One-Piece

–

8-10 ft (2.4-3.0 m)

One-Piece

Two-Piece

12 ft (3.7 m)

Two-Piece

One-Piece

15 ft (4.6 m)

Two-Piece

–

GRIDPAK and Mini GRIDPAK Antennas - KP, KPR, MKP Series All

Reflector shipped Disassembled

–


Antenna Accessories Additional Struts for Microwave Antennas Fixed and Adjustable Side Struts provide increased rigidity. They can be added to any of the antennas, as indicated in the table, as a first or second strut. Bottom Struts are recommended for high ice load environments. Requires mounting pipe which extends to bottom edge of antenna.

Attachment of Strut to Antenna The strut attaches either to a bracket at the antenna rim or to the antenna mounting ring. See illustration.

Attachment at Antenna Mounting Ring 4 and 6 ft Sizes

Attachment at Antenna Rim 8 through 12 ft Sizes

Antenna Mounting Ring

Reflector Rim

Optional Fixed Strut Kit520570-1 or 520570-2

Optional Fixed Strut Kit-520570-4

Strut Mounting Bracket520568 (supplied with 8-12 ft shielded antennas and standard 12 ft antennas)


Attach Optional Fixed Strut Here


123

Reflector

A Reflector Mounting Ring

B, C

D A

Suitable Tower or Support Structure Member (not supplied)

E, F

4.5 in (115 mm) Diameter Mounting Pipe (not supplied)

H

G

I Mounting Ring

K J

B, C, L

G

D

124


A Reflector Strut Brackets, Type Number 520568 (replaces 44695) Two brackets attach to the edge of 8 ft, 10 ft, and 12 ft reflectors to provide an attachment point for the fixed side strut. Brackets are cast aluminum and the kit contains all (metric) stainless steel hardware for attachment to the reflector. Quantity: 2 per kit. B Adjustable Inboard Strut Kit, Type Number 520570-1 (replaces 221865) Solid reflector for the 12 ft. Azimuth wind brace with threaded rod adjustment assembly allows for fine antenna alignment and lock down. Galvanized steel pipe and brackets include all (metric) galvanized hardware for attachment to antenna mount or reflector mounting ring. Also includes item D, and G for tower end attachment. Strut pipe is schedule 80, and 10.5 ft (3.2 m) in length. C Inboard Strut Kit (less azimuth adjustment), Type Number 520570-2 Typically used as an optional side strut for 4 ft (1.2 m) and 6 ft (1.8 m) reflectors same as B less item D. Includes strut and strut collar assembly (G). D Azimuth Adjustment Kit, Type Number 520569 (replaces 40186-2) Attaches to inboard side strut (and strut collar assembly) to allow fine movement of the antenna during final alignment. Straight (metric) threaded rod assembly and associated hardware included. Order strut collar clamp (G) separately. E Outboard Strut Kit, Type Number 520570-3 Galvanized fixed side strut provides increased rigidity. Kit includes universal joint and (metric) hardware for attachment to reflector strut bracket (item A) included. Strut collar assembly (item G) also included to provide interface to tower. Strut pipe is schedule 80 and 10.5 ft (3.2m) in length. F Outboard Strut Replacement Kit, Type Number 520570-4 (replaces 38891A)

G Strut Collar Assembly, Type Number 520477 (replaces 222944) Provides tower interface and strut securement point. Galvanized clamp assembly includes stainless and galvanized hardware. (See tower interface options). H Bottom Strut Kit, Type Number 520570-5 (replaces 40604) Provides additional support to antennas due to weight of high ice loads. Reflector strut bracket, galvanized strut pipe, strut collar assembly, and (pipe mount) angle interface bracket included. All associated (metric) hardware is galvanized. Strut is schedule 80 and 5.0 ft (1.52 m) in length. Existing (extended) antenna pipe mount is required for strut attachment. I Grid Strut Kit (KP Series only), Type Number 100232-7 (for 8, 10 and 13 ft only) Provides added support in either the azimuth or elevation plane. Reflector strut bracket, strut pipe, strut collar assembly and hardware. All parts are galvanized including hardware. Strut is schedule 80 and 10.0 ft (3.05 m) in length. Order adjustment assembly separately, item J. J Fine Azimuth Adjustment Assembly for Grid Strut and Collar Clamp Assembly, Type Number 100093-2 All parts galvanized including hardware. K Grid Clamp Assembly, Type Number 100094 For replacement of item I and use with item J. All parts are galvanized including hardware. L Short Strut Assembly, Type Number 520570-7 Short strut assembly for 6 ft (2.0 m) standard antennas allows strut packed within shipping crate. Includes hardware for attachment to antenna and tower. Strut is 83.5 in (1212 mm).

Includes item G less item A reflector bracket.



125

Attachment of Strut to Tower Direct bolt attachment of the side strut clamp to angle members is recommended. An 11/16" (18 mm) hole should be drilled in the appropriate strut support member. Note: Holes should not be drilled without prior approval of the tower manufacturer. Type 223740 round member clamp (order separately) can be used on members having a diameter of 1 to 3 in (25-76 mm). See illustration.

Termination Loads When both ports of a dual polarized antenna are not being used, Andrew recommends using a termination load to ensure your antenna meets the stated Andrew specifications. Refer to page 212.

Replacement Components Andrew can also supply the following replacement components for your Andrew antennas:

Termination Load

• • • • •

Reflectors Radomes (see page 119) Major hardware kits Universal guy wire kit Struts (see page 123)

• Feeds • Shield absorber kits • Mounts (see page 95) • Shields

For Round Tower Members

For Angle Tower Members Side Strut Clamp Assembly (fixed and adjustable struts) Type No. 520477

Azimuth Adjustment Assembly (adjustable struts only) Type No. 520569 Side Strut Round Tower Member

Type 223740 Round Member Adaptor Clamp (order separately)

Tower Member

18 mm (11/16") Dia. Hole Required for Side Strut Clamp Assembly Invert Clamp for Round Members Under 1–7/8" (48 mm) Diameter

126


ValuLine® Antennas

A Cost-Effective Antenna Solution for Today’s Terrestrial Microwave Systems ValuLine® antennas provide a cost-effective solution for all terrestrial microwave systems operating at frequencies between 7 GHz and 60 GHz. The ValuLine range includes both High Performance shielded antennas (VHP Series) and Standard performance unshielded antennas (VP Series). These antennas are available in both single and dual polarized configurations and in sizes from 1 ft (0.3 m) to 6 ft (1.8 m) in diameter. Andrew ValuLine antennas economically satisfy the requirements of the cellular, PCS/PCN, broadcast, and private user microwave applications, while still delivering the superior performance and overall quality expected of Andrew. ValuLine antennas meet the regulatory requirements of FCC, ETSI, RA, and BAPT and are qualified in many countries including Russia, Brazil, and Poland. The antennas meet the requirements of the EIA195 and 222 standards for electrical, mechanical, and structural characteristics, and are backed by a three-year warranty.

(VHLP Series) offering excellent electrical performance in an antenna with minimal environmental impact. Low profile antennas are available in frequencies from 13 GHz to 38 GHz and in sizes from 1 ft (0.3 m) to 4 ft (1.2 m) in diameter. Flat Plate Antennas The new ValuLine Flat Plate antennas provide the ultimate solution for operators who require low visibility antennas for short haul communications in areas such as congested inner city sites. These antennas provide excellent pattern performance, normally only achieved by shielded antennas, in a package less than 2 inches (46 mm) deep. This very low profile antenna, weighing less than 8 pounds (3.6 kg), reduces tower wind loading and is a cost-effective package for worldwide shipping. Products are available in the 23 GHz, 27 GHz and 38 GHz 136 frequency bands. Contact Andrew for further details. Direct Antenna Radio Integration

Fast, easy installation is made possible by the use of simple pole mounts, which can be attached to pipes with diameters ranging from 1.9 inches (48 mm) to 4.5 inches (115 mm), depending on antenna type. Radome installation on the 4 ft (1.2 m) and 6 ft (1.8 m) antennas is dramatically simplified by the use of rigid plastic radomes. Optionally, Andrew can supply these radomes painted to match local surroundings, minimizing their environmental impact.

Andrew has worked with the world’s leading radio houses to develop antennas that can be directly integrated with the radio outdoor unit. These integrated antennas are available in all frequencies from 7 GHz to 38 GHz and in sizes from 1 ft (0.3 m) to 6 ft (1.8 m) in diameter. These integrated solutions, currently available for over 20 major radio suppliers, provide a significant benefit in overall system cost.

Low Profile Antennas

In order to reduce shipping costs to sites worldwide, ValuLine antennas are available from Andrew locations in Scotland, U.S.A., Brazil, and Australia. Standard Andrew designs and process controls ensure product consistency and quality throughout the world.

To meet increasing demand for low visibility antenna systems, the ValuLine product range has been extended to include a new range of low profile shielded antennas


Multiple Manufacturing Locations


127

ValuLine® Antenna Nomenclature Andrew uses an alphanumeric numbering system for identifying and ordering ValuLine antennas. Andrew type numbers describe the antenna type, size, regulatory compliance, frequency band, catalog revision, and other available options including flange type and VSWR specifications, antenna and radome color, and packing and assembly information. This system is known worldwide and Andrew terminology is often used to specify antenna within procurement documents. Example: VHP 2 A - 220 A 2 4 1 1 2 3 4 5 6 7 8 1 Antenna Type. The prefix is two, three, or four letters that describe the antenna type. Use:

To indicate:

VHP Shielded, Single Polarized VHPX Shielded, Dual Polarized VP Unshielded, Single Polarized VHLP Low Profile, Single Polarized 2 Antenna Size. The number indicates the antenna diameter in feet. Use: To indicate: 1 1 ft (0.3 m) 2 2 ft (0.6 m) 2.5 2.5 ft (0.8 m) 4 4 ft (1.2 m) 6 6 ft (1.8 m) 3 Regulatory Compliance. Use: To indicate: A Non-compliant to UK RA Specification blank Compliant to UK RA Specification 4 Frequency Band. The numbers following the first hyphen are an abbreviated designation for the operating frequency band.

128

Use: 71 71W 74 77 102 105 107 117 130 142 159 173 1823 180 220 240 240W 275 275W 310 370 490 540 570

To indicate: 7.125-7.75 GHz 7.125-8.5 GHz 7.425-7.9 GHz 7.725-8.5 GHz 10.2-10.7 GHz 10.5-10.7 GHz 10.7-11.7 GHz 11.7-12.2 GHz 12.75-13.25 GHz 14.25-15.35 GHz 15.9-16.5 GHz 17.3-17.7 GHz 17.7-19.7 GHz/21.2-23.6 GHz 17.7-19.7 GHz 21.2-23.6 GHz 24.25-26.5 GHz 24.25-29.5 GHz 27.5-29.5 GHz 27.5-29.5 GHz/31.0-31.3 GHz 31.0-31.8 GHz 37.0-40.0 GHz 49.2-50.2 GHz 54.25-57.2 GHz 57.2-58.2 GHz

5 Catalog Revision. This letter identifies product revisions. A change in revision letter indicates a change in electrical or mechanical specifications that affect antenna performance or the interface with other system equipment. In addition, contact Andrew for details about these options: 6 Antenna Flange Type and VSWR Specification. See table on page 130. 7 Antenna Appearance. This number identifies the antenna color, radome color, and the presence of the Andrew flash. 8 Packing Type and Assembly Option. In the example above, VHP2A-220A-241 is: 1 ValuLine High Performance, shielded, single polarized 2 2 ft (0.6 m) in diameter 3 Non-compliant to UK RA specifications 4 21.2-23.6 GHz band 5 A Revision 6 PBR220, 1.20 VSWR 7 White Antenna, white radome, no flash 8 Standard packing


E-Series ValuLine® Antennas for Use in Extreme Environments ValuLine® antennas are now available in upgraded versions that allow them to be used in locations subjected to high wind load or corrosive environments. These antennas, available in diameters of 1 ft (0.3 m), 2 ft (0.6 m), 2.5 (0.8 m), 4 ft (1.2 m), and 6 ft (1.8 m), are mechanically upgraded to withstand 155 mph (250 km/h) through the use of additional struts and strengthened reflectors. The antennas also include additional treatments that will provide long-term protection in marine, urban, and most industrial environments: • Factory applied epoxy painting • Hot-dip galvanizing • Stainless steel hardware • Corrosion inhibiting compounds Contact Andrew for more information.



129

Antenna Specifications and Ordering Information

Radome Applications

Our ValuLine® antennas are presented in the tables on pages 131-137. The tables are arranged by operating frequency band, in ascending order. Within the tables, antennas are grouped by antenna type and by diameter. Basic Antenna The type numbers listed in the tables define the basic antenna, less options and accessories. The numbers correspond with those appearing on the Radiation Pattern Envelopes published by Andrew (see page 48) and also define the electrical performance parameters of the antenna. Input Flanges ValuLine antennas can be supplied with many different EIA and IEC flange types. The recommended flanges are identified in the table below. Contact Andrew for information about other flange options. Radomes Radomes are used to protect microwave antennas against accumulation of ice, snow, and dirt and to reduce wind loading. ValuLine shielded antennas are supplied with molded planar polymer radomes.

Antenna Type

Antenna Series

Included Radome

Optional Radomes

ValuLine

VHP, VHPX

Polymer

–

VP, VPX

–

Molded plastic (VR Series)

The VR Series of plastic radomes are designed to offer maximum protection to VP and VPX Series unshielded ValuLine antennas in diameters ranging from 2 ft (0.6 m) to 6 ft (1.8 m). The material is highly resistant to ultraviolet rays and provides high reliability under severe environmental conditions. Their aerodynamic shape dramatically reduces the wind loading on the tower. These radomes are available as standard in gray or white. Bulk pack options are also available on request. Contact Andrew for more information. VR Series Radomes for Unshielded ValuLine Antennas

Antenna Diameter

Gray Gray White White Radome Radome Radome Radome with without with without Andrew flash Andrew flash Andrew flash Andrew flash

2 ft (0.6 m)

VR2-1

VR2-2

VR2-1-WH

VR2-2-WH

4 ft (1.2 m)

VR4-1

VR4-2

VR4-1-WH

VR4-2-WH

6 ft (1.8 m)

VR6-1

VR6-2

VR6-1-WH

VR6-2-WH

Input Flanges

130

Frequency Band

Recommended EIA Flange

Recommended IEC Flange

Frequency Band

Recommended EIA Flange

Recommended IEC Flange

-71 -71W -74 -77 -102 -105 -107 -117 -130 -142 -159 -173

CPR112G CPR112G CPR112G CPR112G CPR90G CPR90G CPR90G WR75 WR75 UG-541A/U — —

PDR84 PDR84 PDR84 PDR84 PDR100 PDR100 PDR100 PDR120 PDR120 PBR140 PDR180 PDR180

-1823 -180 -220 -240 -240W -275 -275W -310 -370 -490 -540 -570

UG-595/U Modified UG-595/U Modified UG-595/U Modified UG-595/U Modified — UG-599/U Modified UG-599/U Modified UG-599/U Modified UG-599/U Modified UG-385-25 UG-385-25 UG-385-25

PBR220 PBR220 PBR220 PBR220 PBR260 PBR320 PBR320 PBR320 PBR320 — — —


Refer to pages 177 and 179 for Elliptical Waveguide ordering information

7.125 - 7.75 GHz (WR112 / R84) Type Number

Diameter Gain, dBi ft (m) Bottom Mid-Band Top

Beamwidth Cross Pol. F/B Ratio VSWR max. degrees Disc., dB dB (R.L., dB)

Fine Adjustment Survival degrees Wind Speed Azimuth Elevation mph (km/h)

Net Weight lb (kg)

VP2-71 VP4-71 VP6-71

2 (0.6) 4 (1.2) 6 (1.8)

30.6 36.8 40.5

31.0 37.2 40.9

31.4 37.5 41.3

4.9 2.4 1.6

30 32 32

40 45 49

1.15 (23.1)* 1.15 (23.1)* 1.15 (23.1)*

±15 ±15 ±5

±50 ±20 ±5

155 (250) 125 (200) 125 (200)

19 (8.5) 79 (36.0) 160 (72.5)

VHP2-71 VHP4-71 VHP6-71

2 (0.6) 4 (1.2) 6 (1.8)

29.8 36.0 39.8

30.1 36.4 40.2

30.4 36.7 40.6

4.9 2.4 1.6

30 32 32

53 60 64

1.15 (23.1)* 1.15 (23.1)* 1.15 (23.1)*

±15 ±15 ±5

±50 ±20 ±5

155 (250) 125 (200) 125 (200)

33 (15.0) 126 (57.0) 347 (157.5)

VHPX2-71 VHPX4-71 VHPX6-71

2 (0.6) 4 (1.2) 6 (1.8)

29.2 35.9 39.7

29.5 36.3 40.1

29.8 36.6 40.5

4.8 2.4 1.6

30 32 32

53 60 64

1.30 (17.7)** 1.15 (23.1)* 1.15 (23.1)*

±15 ±15 ±5

±50 ±20 ±5

155 (250) 125 (200) 125 (200)

33 (15.0) 126 (57.0) 347 (157.5)

* 1.10 (26.4) available on request

** 1.25 (19.1) available on request





Net Weight lb (kg)

VP2-71W VP4-71W VP6-71W

2 (0.6) 4 (1.2) 6 (1.8)

30.6 36.8 40.5

31.4 37.5 41.3

32.1 38.3 42.0

4.8 2.3 1.5

30 32 32

40 45 49

1.20 (20.8) 1.15 (23.1) 1.15 (23.1)

±15 ±15 ±5

±50 ±20 ±5

155 (250) 125 (200) 125 (200)

19 (8.5) 79 (36.0) 160 (72.5)

VHP2-71W VHP4-71W VHP6-71W

2 (0.6) 4 (1.2) 6 (1.8)

29.8 36.0 39.7

30.4 36.6 40.5

31.1 37.5 41.2

4.9 2.4 1.7

30 32 32

54 62 66

1.15 (23.1) 1.15 (23.1) 1.15 (23.1)

±15 ±15 ±5

±50 ±20 ±5

155 (250) 125 (200) 125 (200)

33 (15.0) 126 (57.0) 347 (157.5)

VHPX2-71W VHPX4-71W VHPX6-71W

2 (0.6) 4 (1.2) 6 (1.8)

29.2 35.9 39.7

29.8 36.7 40.5

30.4 37.4 40.7

4.8 2.4 1.7

30 32 32

53 60 64

1.30 (17.7) 1.20 (20.8) 1.20 (20.8)

±15 ±15 ±5

±50 ±20 ±5

155 (250) 125 (200) 125 (200)

33 (15.0) 126 (57.0) 347 (157.5)





Net Weight lb (kg)

VP2-74 VP4A-74

2 (0.6) 4 (1.2)

31.0 37.2

31.2 37.4

31.5 37.7

4.8 2.3

30 32

40 45

1.15 (23.1)* 1.15 (23.1)*

±15 ±15

±50 ±20

155 (250) 125 (200)

19 (8.5) 79 (36.0)

VHP2-74 VHP4A-74 VHP4-74 VHP6A-74

2 (0.6) 4 (1.2) 4 (1.2) 6 (1.8)

30.1 36.4 36.2 40.2

30.4 36.6 36.4 40.4

30.6 36.9 36.7 40.6

4.8 2.3 2.3 1.5

30 32 32 32

54 62 62 64

1.15 (23.1)* 1.15 (23.1)* 1.15 (23.1)* 1.15 (23.1)*

±15 ±15 ±15 ±5

±50 ±20 ±20 ±5

155 (250) 125 (200) 125 (200) 125 (200)

33 (15.0) 126 (57.0) 126 (57.0) 347 (157.5)

VHPX2A-74 VHPX4A-74 VHPX6A-74

2 (0.6) 4 (1.2) 6 (1.8)

29.5 36.3 40.1

29.7 36.5 40.3

29.9 36.8 40.5

4.7 2.4 1.5

30 32 32

53 60 64

1.30 (17.7)** 1.15 (23.1)* 1.15 (23.1)*

±15 ±15 ±5

±50 ±20 ±5

155 (250) 125 (200) 125 (200)

33 (15.0) 126 (57.0) 347 (157.5)





131

Refer to pages 179 and 183 for Elliptical Waveguide ordering information





Net Weight lb (kg)

VP2-77 VP4-77 VP6-77

2 (0.6) 4 (1.2) 6 (1.8)

31.3 37.5 41.3

31.7 37.9 41.7

32.1 38.3 42.0

4.6 2.2 1.5

30 32 32

40 45 50

1.15 (23.1)* 1.15 (23.1)* 1.15 (23.1)*

±15 ±15 ±5

±50 ±20 ±5

155 (250) 125 (200) 125 (200)

19.0 (8.5) 79.0 (36.0) 160 (72.5)

VHP2-77 VHP4-77 VHP6-77

2 (0.6) 4 (1.2) 6 (1.8)

30.4 36.7 40.6

30.8 37.1 40.7

31.1 37.5 40.8

4.6 2.2 1.5

30 32 32

54 62 64

1.15 (23.1)* 1.15 (23.1)* 1.15 (23.1)*

±15 ±15 ±5

±50 ±20 ±5

155 (250) 125 (200) 125 (200)

33 (15.0) 126 (57.0) 347 (157.5)


2 (0.6) 4 (1.2) 6 (1.8)

29.8 36.6 40.5

30.1 37.0 40.6

30.4 37.4 40.7

4.6 2.2 1.5

30 32 32

53 60 64

1.30 (17.7)** 1.15 (23.1)* 1.15 (23.1)*

±15 ±15 ±5

±50 ±20 ±5

155 (250) 125 (200) 125 (200)

33 (15.0) 126 (57.0) 347 (157.5)







Net Weight lb (kg)

VHP2-102 VHP4-102 VHP6-102

2 (0.6) 4 (1.2) 6 (1.8)

33.5 39.6 42.8

33.7 39.8 43.0

33.9 40.0 43.2

3.5 1.8 1.2

32 32 32

59 65 68

1.20 (20.8)* 1.20 (20.8)* 1.20 (20.8)*

±15 ±15 ±5

±50 ±20 ±5

155 (250) 125 (200) 125 (200)

33 (15.0) 126 (57.0) 347 (157.5)


2 (0.6) 4 (1.2) 6 (1.8)

33.2 39.4 42.7

33.4 39.6 42.9

33.6 39.8 43.1

3.5 1.8 1.2

32 32 32

59 65 68

1.25 (19.1)** 1.25 (19.1)** 1.25 (19.1)**

±15 ±15 ±5

±50 ±20 ±5

155 (250) 125 (200) 125 (200)

33 (15.0) 126 (57.0) 347 (157.5)



10.5 - 10.7 GHz (WR90 / R100) Type Number VHP2-105 VHP4-105 VHP6-105

Diameter Gain, dBi ft (m) Bottom Mid-Band Top 2 (0.6) 4 (1.2) 6 (1.8)

34.0 39.8 43.1

34.1 39.9 43.2

34.2 40.0 43.3

Beamwidth Cross Pol. F/B Ratio VSWR max. degrees Disc., dB dB (R.L., dB) 3.4 1.8 1.1

32 32 32

55 60 67

1.20 (20.8)* 1.20 (20.8)* 1.20 (20.8)*

Fine Adjustment Survival degrees Wind Speed Azimuth Elevation mph (km/h) ±15 ±15 ±5

±50 ±20 ±5

155 (250) 125 (200) 125 (200)

Net Weight lb (kg) 33 (15.0) 126 (57.0) 347 (157.5)


10.7 - 11.7 GHz (WR90 / R100) Type Number VHP4-107 VHP6-107

Diameter Gain, dBi ft (m) Bottom Mid-Band Top 4 (1.2) 6 (1.8)

40.1 43.3

40.5 43.6

40.9 43.9

Beamwidth Cross Pol. F/B Ratio VSWR max. degrees Disc., dB dB (R.L., dB) 1.8 1.1

32 32

60 67

1.20 (20.8)* 1.20 (20.8)*

Fine Adjustment Survival degrees Wind Speed Azimuth Elevation mph (km/h) ±15 ±5

±20 ±5

125 (200) 125 (200)

Net Weight lb (kg) 126 (57.0) 347 (157.5)


11.7 - 12.2 GHz (WR75 / R120) Type Number VHP4-117

Diameter Gain, dBi ft (m) Bottom Mid-Band Top 4 (1.2)

40.9

41.0

41.1

Beamwidth Cross Pol. F/B Ratio VSWR max. degrees Disc., dB dB (R.L., dB) 1.7

32

60

1.20 (20.8)*

Fine Adjustment Survival degrees Wind Speed Azimuth Elevation mph (km/h) ±15

±20

125 (200)

Net Weight lb (kg) 126 (57.0)


132


Antenna Mechanical Specifications All ValuLine® antennas include a vertical tower mount. Standard mounting information is shown below. Dimensional information and illustrations for installation are shown on pages 139-147. Mounting Pipe. Vertical tower mounts attached to a tower supported vertical pipe of the diameter specified in the table below. The mounting pipe is not included with the antenna. It is normally purchased as part of the tower. Mount Construction. Structural members are hot-dip galvanized steel or aluminum. Hardware. Fixed hardware is hot-dip galvanized steel. Adjusting hardware, including adjusting rods, is stainless steel. Azimuth and Elevation Adjustments. The adjustment ranges are indicated in the table below. Some mounts, as noted in the table, use a swivel clamp for azimuth adjustment. Adjustment range for these is 360 degrees. All ValuLine antenna mounts have threaded fine elevation adjustment. Side Struts. Some ValuLine antennas include a side strut. The side strut includes a stainless steel threaded rod fine azimuth adjustment. See page 123 for information about side strut positioning.

Vertical Tower Mounts Antenna Size ft (m)

Replacement Mount Type Number Metric Standard Hardware

Mounting Pipe Dia. Center Offset* in (mm) in (mm)

Fine Azimuth Adjustment Degrees

Fine Elevation Adjustment Degrees

Side Struts Included

1 (0.3)

Integral

1.9-4.5 (48-115)

10.9 (278)

± 15°

± 50°

–

2 (0.6)

Integral

1.9-4.5 (48-115)

11.5 (292)

± 15°

± 50°

–

2.5 (0.8)

Integral

2.5-4.5 (65-115)

12.4 (315)

± 15°

± 50°

–

4 (1.2)

Integral

4.5 (115)

10.4 (264)

± 15°

± 20°

1

6 (1.8)

46770A-3

4.5 (115)

5.4 (137)

± 15°

± 5°

1

* With respect to the mounting pipe viewed from the rear of the antenna. Can be reversed by inverting the mount or antenna. Note: Integral mounts consist of multiple type numbers. Contact Andrew for type numbers.

138


1-ft ValuLine® Antenna Dimensions

B

C

A

D E

F


A

B

C

D

E

F

1 (0.3)

15.6 (398)

15.5 (393)

10.9 (278)

4.3 (110)

8.7 (220)

1.65 (42)

All dimensions based on 4.5 in (115 mm) pipe.



139

1-ft ValuLine® Low Profile Antenna Dimensions

B

C

A

Suitable for mounting to 2.0 in to 4.5 in (50 mm - 115 mm) pipe D

E

F


A

B*

C

D

E

F

1 (0.3)

15.6 (398)

11.4 (289)

10.9 (278)

4.3 (110)

8.7 (220)

1.65 (42)

* 12.4 (314 mm) for VHLP1-220 antenna All dimensions based on 4.5 in (115 mm) pipe

140


2-ft ValuLine® Shielded and Standard Antenna Dimensions

B B

C

A

Suitable for mounting to 2.5 in to 4.5 in (65 mm - 115 mm) pipe

D E

F


A

B

C

D

E

F

2.0 (0.6) Shielded 2.0 (0.6) Standard

25.6 (651) 25.0 (637)

27.5 (699) 10.5 (266)

11.5 (292) 11.5 (292)

4.3 (110) 4.3 (110)

8.7 (220) 8.7 (220)

1.65 (42) 1.65 (42)




141


B

C

A


D

E

F


A

B

C

D

E

F

2 (0.6)

25.6 (651)

16.1 (410)

11.5 (292)

4.3 (110)

8.7 (220)

1.65 (42)

All dimensions based on 4.5 in (115 mm) pipe

142


2.5-ft ValuLine® Shielded and Standard Antenna Dimensions

C


B shielded B standard F

D

A

E


A

B

C

D

E

F

2.5 (0.8) Shielded 2.5 (0.8) Standard

35 (889) 35 (889)

29.6 (752) 15.2 (385)

11.9 (301) 11.9 (301)

6 (153) 6 (153)

13.3 (338) 13.3 (338)

8.2 (208) 8.2 (208)




143

2.5-ft ValuLine® Low Profile Antenna Dimensions

C

B Suitable for mounting to 2.5 in to 4.5 in (65 mm - 115 mm) pipe

F

D E

A


A

B

C

D

E

F

2.5 (0.8)

35 (889)

24.5 (622)

11.9 (301)

6 (153)

13.3 (338)

8.2 (208)


144



+ 25° –

Suitable for mounting to 4.5 in (115 mm) pipe only.

E F

A B

G

C

H

L

J

K

D


A

B

C

D

E

F*

G*

4 (1.2)

16.2 (411)

11.6 (295)

14.2 (361)

10.4 (264)

21.4 (544)

30.0 (762)

21.3 (541)

H

J

K

L

20.8 (528)

11.1 (288)

6.5 (165)

49.1 (1247)

* Applicable only for VHP Series (shielded) antennas.



145


+– 25°

E

A F B

G

Suitable for mounting to 4.5 in (115 mm) pipe

C

H

ØL J

D

K

Dimensions in Inches (mm)

146

Antenna Size, ft (m)

A

B

C

D

E

F

G

4 (1.2)

16.2 (411)

11.6 (295)

14.2 (361)

10.4 (264)

21.4 (544)

23.4 (594)

14.7 (373)

H

J

K

L

20.8 (528)

11.1 (288)

6.5 (165)

49.1 (1247)



A

B

C

Alternative mounting position

D

Attachment point for azimuth adjustment strut

+– 25°

E F

L

G

H

N M K

Suitable for mounting to 4.5 in (115 mm) pipe J


A

B

C

D

E

F

G

6 (1.8)

76.5 (1945)

34.7 (881)

12.75 (325)

18.8 (476)

9.7 (246)

26.5 (675)

7.65 (195)

H

J

K

L

M

N

2.25 (60)

5.4 (137)

26.5 (675)

11.75 (300)

19.1 (488)

29.1 (740)



147

Forces and Twisting Moments Due to Wind Loads The axial, side, and twisting moment forces shown below are maximum values exerted on a supporting structure. They are the result of wind from the most critical direction for each parameter. The individual maximums may not occur simultaneously. Andrew Software, included on the Powertools CD-ROM and downloadable from www.andrew.com, calculates the forces produced by winds from any angle. See page 44 for more information.

Forces and Twisting Moments Due to Wind Loads

Forces/ Moments

70 mph 110 km/h 31 m/s

Wind Speed 125 mph 200 km/h 56 m/s

150 mph 250 km/h 69 m/s

23 (102) 9 (41) 18 (24)

75 (334) 30 (135) 58 (79)

108 (481) 44 (194) 84 (114)

23 (102) 10 (46) 19 (26)

75 (334) 34 (150) 63 (85)

108 (481) 49 (216) 90 (122)

66 (294) 18 (80) 62 (84)

216 (960) 59 (262) 204 (276)

311 (1382) 85 (377) 293 (397)

51 (226) 27 (121) 44 (60)

166 (740) 89 (394) 145 (196)

240 (1066) 127 (567) 208 (282)

51 (226) 32 (141) 60 (81)

166 (740) 103 (460) 195 (264)

240 (1066) 149 (662) 280 (380)

33 (147) 20 (91) 29 (39)

108 (482) 67 (297) 94 (128)

156 (694) 96 (428) 136 (184)

103 (459) 28 (125) 105 (143)

337 (1501) 92 (410) 345 (468)

– – –

264 (1176) 72 (321) 194 (263)

864 (3843) 236 (1049) 633 (858)

– – –

FAT max., lb (N) FST max., lb (N) MT max., lb-ft (N•m)

194 (863) 86 (383) 181 (245)

634 (2821) 281 (1251) 590 (800)

– – –


194 (863) 96 (428) 202 (274)

634 (2821) 314 (1398) 659 (894)

– – –


133 (591) 77 (342) 175 (237)

434 (1930) 251 (1118) 571 (774)

– – –


595 (2646) 162 (722) 547 (742)

1944 (8647) 531 (2360) 1789 (2425)

– – –


437 (1942) 216 (962) 499 (676)

1427 (6348) 707 (3144) 1629 (2209)

– – –

976 (4343) 601 (2673) 1703 (2309)

– – –

6 ft (1.8 m) VP, VPX with Molded Radome

2.5 ft (0.8 m) VHLP, VHLPX FAT max., lb (N) FST max., lb (N) MT max., lb-ft (N•m)


6 ft (1.8 m) VHP, VHPX

2.5 ft (0.8 m) VP, VPX FAT max., lb (N) FST max., lb (N) MT max., lb-ft (N•m)

– – –

6 ft (1.8 m) VP, VPX

2 ft (0.6 m) VP, VPX with Molded Radome FAT max., lb (N) FST max., lb (N) MT max., lb-ft (N•m)

170 (754) 104 (464) 160 (217)

4 ft (1.2 m) VP, VPX with Molded Radome

2 ft (0.6 m) VHP, VHPX FAT max., lb (N) FST max., lb (N) MT max., lb-ft (N•m)

52 (231) 32 (142) 49 (66)

4 ft (1.2 m) VHP, VHPX

2 ft (0.6 m) VHLP, VHLPX FAT max., lb (N) FST max., lb (N) MT max., lb-ft (N•m)


4 ft (1.2 m) VHLP, VHLPX

2 ft (0.6 m) VP, VPX FAT max., lb (N) FST max., lb (N) MT max., lb-ft (N•m)

150 mph 250 km/h 69 m/s

4 ft (1.2 m) VP, VPX

1 ft (0.3 m) VHP, VHPX FAT max., lb (N) FST max., lb (N) MT max., lb-ft (N•m)

Forces/ Moments

Wind Speed 125 mph 200 km/h 56 m/s

2.5 ft (0.8 m) VP, VPX with Molded Radome

1 ft (0.3 m) VHLP, VHLPX FAT max., lb (N) FST max., lb (N) MT max., lb-ft (N•m)

70 mph 110 km/h 31 m/s

76 (337) 34 (150) 70 (95)

248 (1102) 110 (491) 229 (311)

– – –

76 (337) 38 (167) 78 (106)

248 (1102) 123 (546) 255 (346)

– – –


299 (1329) 184 (818) 521 (707)

2.5 ft (0.8 m) VHP, VHPX FAT max., lb (N) FST max., lb (N) MT max., lb-ft (N•m)

148


Antenna Catalogue

Recommend Documents