designed to house AirScale System Module Indoor (ASMI) plug-in unit (PIU) variants. • The AMOB has a thermal management system using a heat exchanger (HEX) to maintain proper temperature for the indoor-rated ASMI PIUs. • The AMOB has features that allow it to be mounted in various ways, including attachment to a wall or pole, as part of a
• Mounting Options – Wall & Pole • The AMOB can be mounted directly to a wall using the FMFA plinth or to a pole using additional pole brackets • An extra bracket is required to secure the AMOB to the FMFA. • When mounted vertically, the following clearances must be observed: o
• Mounting Options – Flexi Module Stack • The AMOB can be mounted to a stack of Flexi modules • An additional stacking plinth (and security bracket) is required • No equipment can be mounted above the AMOB • When mounted horizontally, the following clearances must be observed: o
• Mounting Options – FCOA Cabinet • The AMOB can be m ounted inside an FCOA cabinet • The AMOB must be supported using the cabinet horizontal side support brackets • Additional front support brackets (x2) are required to secure the AMOB to the 19” rack uprights of the cabinet
