Acuson X300 Syngo Service Information 741-7384

ACUSON X300 US

Function Description System syngo Service Information

The document is valid for use with the following products: ACUSON X300 and SONOVISTA X300 and ACUSON X300 Premium Edition ultrasound systems ©Siemens, 2011

10427629 10427605 10427541 10427540 10348533 10348531 10132987 10132436 10038837 10037409

© Siemens Siemens,, 2011 BJ Siemens

Print No.: Replaces: Part No.:

US11-104.850.01.12.02 US11-104.850.01.11.02

- For internal use only - All documents may only be used by authorized personnel for rendering services on Siemens Healthcare Products. Any document in electronic form may be printed once. Copy and distribution of electronic documents and hardcopies is prohibited. Offenders will be liable for damages. All other rights are reserved.

English Doc. Gen. Date: 02.11 n.a.

2011

Ultrasound

2

Copyright / Version / Disclaimer

1Copyright/ Version/ Disclaimer

Copyright “© Siemens, 2011“ refers to the copyright of a Siemens entity such as Siemens Aktiengesellschaft - Germany, Germany, Siemens Mindit Magnetic Resonance Reso nance Ltd. - China, Siemens Shanghai Medical Equipment Ltd. - China, Siemens Medical Solutions USA Inc. - USA and/or an d/or Siemens Healthcare Diagnostics Inc. - USA. Document Version Siemens reserves the right to change its products and services at any time. In addition, manuals are subject to change without with out notice. The hardcopy documents correspond to the version at the time of system delivery and/or printout. Versions to hardcopy documentation are not automatically distributed. Please contact your local Siemens office to order current version or refer to our website http://www.healthcare.siemens.com. Disclaimer Siemens provides this documentation “as is“ without the t he assumption of any liability under any theory of law. The service of equipment described herein is to be performed by qualified personnel who are employed by Siemens or one of its affiliates or who are otherwise authorized autho rized by Siemens or one of its affiliates to provide such services. Assemblers and other persons who are not employed by or otherwise directly affiliated with or authorized by Siemens or one of its affiliates are not entitled to use this documentation without prior written authority.

ACUSON X300

US11-104.850.01.12.02 02.11

Page 2 of 100 Ultrasound

© Siemens, 2011 For internal use only

2

Copyright / Version / Disclaimer

1Copyright/ Version/ Disclaimer

Copyright “© Siemens, 2011“ refers to the copyright of a Siemens entity such as Siemens Aktiengesellschaft - Germany, Germany, Siemens Mindit Magnetic Resonance Reso nance Ltd. - China, Siemens Shanghai Medical Equipment Ltd. - China, Siemens Medical Solutions USA Inc. - USA and/or an d/or Siemens Healthcare Diagnostics Inc. - USA. Document Version Siemens reserves the right to change its products and services at any time. In addition, manuals are subject to change without with out notice. The hardcopy documents correspond to the version at the time of system delivery and/or printout. Versions to hardcopy documentation are not automatically distributed. Please contact your local Siemens office to order current version or refer to our website http://www.healthcare.siemens.com. Disclaimer Siemens provides this documentation “as is“ without the t he assumption of any liability under any theory of law. The service of equipment described herein is to be performed by qualified personnel who are employed by Siemens or one of its affiliates or who are otherwise authorized autho rized by Siemens or one of its affiliates to provide such services. Assemblers and other persons who are not employed by or otherwise directly affiliated with or authorized by Siemens or one of its affiliates are not entitled to use this documentation without prior written authority.

ACUSON X300

US11-104.850.01.12.02 02.11



Table of Contents

3

0Tableof Contents

1________ syngo Service Information_____________________________________ Information_________________________________________ ____ 5 Service Software Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 .5 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

2________ Local Service Software Access Access ______________ ___________________________ _______________________ __________ 6 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

3________ Remote Service Software Access Access _____________ __________________________ ______________________ _________ 8 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Service Access Level (SAL) (SAL) Strategies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

4________ Starting the Service Software _____________ _________________________ ________________________ ____________ 13 Starting the Service Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

5________ Service Software Home Menus_________________________________ Menus____________________________________ ___ 17 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 How to Use Service Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 .20 Local Host . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 System Management. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Manual Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49 . 49 Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53 .53 Post (Power (Power On Self Test) Test) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 . 55 Pattern Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Control Panel Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63 . 63 Check Disk. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 File Tools Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70 .70 Backup & Restore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Service Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74 . 74 Auto Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77 Utilities. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 Install Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80 .80 Disk Defragmentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81 .81 Manage User Accounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Exit to OS Shell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Remote Updating of the Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..88 88 Event Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98 .98


US11-104.850.01.12.02 02.11


ACUSON ACUSON X300

4

Table of Contents

6 _______ Changes to Previous Version _____________________________________ 99

ACUSON X300

US11-104.850.01.12.02 02.11



syngo Service Information

5

1-

Service Software Introduction

0

Overview

0

1syngo ServiceInformation

The Service Software is designed to follow the Med Software General Error Concept as described in General Error Concept Med, Specification Catalog. The Service Software provides the Siemens ACUSON X300™, AUCSON X300™ Premium Edition and SONOVISTA X300™ ultrasound systems with the mechanism to comply with the General Error Concept.The Service Software of SW versions 1.0/2.0/3.0 are based on the syngo Lite VE25A. The Service Software of SW versions 4.0 and higher are based on the syngo Lite VE31F. However, they have a unique customer UI compared to other syngo based modalities so the steps that the user must take to enter some of the service applications is not common with other modalities. Once a service application has been entered, the functionality is as similar as possible to the standard syngo equivalent. Where the behavior differs from standard syngo behavior, it is noted within this document.The Service Software functions allow the user to check the operation of the hardware and to detect failed circuit boards. Use the methods described in this section to investigate the cause of malfunctions and the circumstances that existed when the malfunction occurred. The Service Software screens support only the English language.

CAUTION

The installation and service of the equipment described here are to be performed by qualified personnel who are employed by Siemens or one of its affiliates or who are otherwise authorized by Siemens or one of its affiliates to provide such services. 


Assemblers and other persons who are not employed by or otherwise directly affiliated with or authorized by Siemens or one of its affiliates are directed to contact one of the local offices of Siemens or one of its affiliates before attempting installation or service procedures.

US11-104.850.01.12.02 02.11


ACUSON X300

6

Local Service Software Access

2-

Overview 2Local ServiceSoftwareAccess

0

Local Service Software Access is a service session that is displayed locally on the system using the system’s control panel, keyboard, and monitor. For local users of the ultrasound system, the entry point for Service functionality is the Presets, then Service menu. The Service menu is an ultrasound-specific page, which is visible only to local users. It is n ot a part of the syngo Service User Interface (UI); however, part of its functionality is to provide a link for the user to open the syngo Service UI. This dialog provides information to the user as detailed below. 1. Go to the Preset Main screen by selecting the Preset button on the Control Panel of the system.

Fig. 1:

ACUSON X300

Preset Main Screen

US11-104.850.01.12.02 02.11



Local Service Software Access

7

2. Select the Service option within the menu tree of the Preset Main screen.

Fig. 2:

Service Main Screen

NOTE

The Remote Application Support is supported from SW version 4.0.

3. Click the Service button in the Service main screen to display the Authentication screen for local service sessions. Local service sessions are performed at the ultrasound system using the system’s keyboard, control panel and monitor.


US11-104.850.01.12.02 02.11


ACUSON X300

8

Remote Service Software Access

3-

Overview 3Remote ServiceSoftwareAccess

0

Remote Service Software Access is a service session where the service UI is executed from some other location. It is used by network connection; a stand-alone PC which is connected to the system via an Ethernet crossover cable, or a remote PC which is connected via a LAN connection. This allows a Customer Service Engineer to perform service tasks on a system without being at the physical location of the system. Remote Ser vice Software Access differs from a Local Service Software Access in that access is controlled by the ultrasound user via the Remote Service Access Control dialog. 1. Click Remote button in the Service Main screen to display the Remote Service Access Control Dialog.

Fig. 3:

ACUSON X300

Service Main Screen

US11-104.850.01.12.02 02.11




9

The following figure shows the Remote Service Access Control Dialog.

Fig. 4:

Remote Service Access Control Dialog

The default setting is 'No Access' (ACUSON X300 r5.0 or below systems) and 'Limited Access Permanent' (ACUSON X300 r6.0 or higher systems). The Limited Access Permanent / Limited Access allow for remote access to the system without interrupting the customer’s normal work flow. Certain service functionality needs full access permission from the user, so that remote personnel can perform those functions, such as system diagnostics. At any time, the customer can select No access to terminate the remote accessibility, so the system can be used mobile. Tab. 1

Remote Service Access Control Dialog.

Mode

Description

Full Access

All Service Software functions are available. The system is assigned exclusively to the remote session.

Limited Access Permanent

The modem port will be continuously available.


US11-104.850.01.12.02 02.11


ACUSON X300

10

Remote Service Software Access Mode

Description

Limited Access

The modem port will be available for a configurable time after it has been enabled. If the remote login does not occur during this time period, the modem port is disabled automatically.

No Access

User does not allow the remote access.

The customer can change the access mode from Limited Access or Limited Access Permanent to Full Access and vice versa at anytime. The customer has to confirm the end of the current service mode in a pop-up window.

ACUSON X300

US11-104.850.01.12.02 02.11



Remote Service Software Access Service Access Level (SAL) Strategies

11 3.1

There are multiple ser vice access levels available. Each successive level allows access to the applications of all lower levels. The following table shows each level of access and who it is intended for. This table describes the general strategy only. Tab. 2

Service Level Strategies

syngo Service Level

ACUSON X300 Level

Level 1

Level 1

Level 2

Not Mapped

Level 3

Not Mapped

Level 4

Not Mapped

Level 5

Not Mapped

Level 6

Not Mapped

Level 7

Level 2

Level 8

Level 3

Level 9

Level 4

The above table shows the mapping of syngo service levels to the ACUSON X300 service levels. Some functions which are not relevant are removed, i.e., Tune-up and DICOM Tests. DIMAQ page in Preset page provides the DICOM functionality. The following diagram shows the syngo SAL structure.


US11-104.850.01.12.02 02.11


ACUSON X300

12


Fig. 5: 5:

ACUSON X300

SAl St Struc ructure

US11-104.850.01.12.02 02.11



Starting the Service Software

13

4-

Starting the Service Software 4Startingthe ServiceSoftware

0

The following steps guide how to start the service software. 1. Press th the Preset key on the control panel of the system. The following fo llowing screen is displayed.

Fig. ig. 6:


Prese resett Ma Main in Scre Screen en

US11-104.850.01.12.02 02.11


ACUSON ACUSON X300

14

Starting the Service Software 2. To access access the the service service software software functions, functions, select the theService Service option from option from the left side of the menu tree.

Fig. ig. 7: 7:

Serv Se rvic ice eM Mai ain nS Scr cree een n

3. Click th the Service button Service button in the Service main screen to display the Authentication Authen tication screen.

ACUSON X300

US11-104.850.01.12.02 02.11



Starting the Service Software

15

4. Enter the password and click the OK button.

Fig. 8:


Authentication Screen

NOTE

The Service Software is protected by a Service Key to prevent unauthorized access. Service Keys are valid for one particular system only over a limited time period (e.g. one year). The last 6 digits of the Service Key have to be entered into the right part every time a login is performed. The left part (14 digits) is memorized by the system if the Set as Default checkbox is selected.

NOTE

When the validity of the Service Key has expired, or when an incorrect Service Key has been entered, a pop-up window appears with the appropriate Service Key identification.

US11-104.850.01.12.02 02.11


ACUSON X300

16

Starting the Service Software 5. When the proper password is entered, the following Home Menu screen is displayed.

Fig. 9:

Service Software Home Menu Screen

NOTE

ACUSON X300

To exit the service software: click the X located on the upper right-hand corner of the screen.

US11-104.850.01.12.02 02.11



Service Software Home Menus

17

5-

Overview 5 ServiceSoftware Home Menus

0

Service Software Home Menu screen displays the site name and system information. Also, it provides menu items to access the ser vice software.

Fig. 10: Service Software Home Menu Screen Tab. 3

Site Name and System Information

Data

Descriptions

Site Name

It displays the hospital name.

System Serial Number

It displays the system serial number.

System S/W Version

It shows the software version of the system.

Tab. 4

Service Software Home Menu Screen Items

Menu Items

Comments

Configuration

See Section “Configuration”

Diagnostics

See Section “Diagnostics”


US11-104.850.01.12.02 02.11


ACUSON X300

18

Service Software Home Menus Menu Items

Comments

File Tools

See Section “File Tools”

Backup & Restore

See Section “Backup & Restore”

Service Image

See Section “Service Image”

Auto Report

See Section “Auto Report”

Utilities

See Section “Utilities”

Software Distribution See Section “Software Distribution” Event Log

ACUSON X300

See Section “Event Log”

US11-104.850.01.12.02 02.11




19

How to Use Service Software

5.1

The following descriptions explain how to use each item of the service software.

NOTE


When the reboot request message displays, make sure to restart the system. If the operation needs to be finished in the middle, click ABORT and then click HOME. HOME is strongly recommended for use when returning to the Service Software Home menus.

US11-104.850.01.12.02 02.11


ACUSON X300

20


Configuration

5.2

To gain access to Configuration screen by selecting Configuration button from the Home Menu screen.

Fig. 11: Home Menu Screen - Configuration

NOTE

Software distribution screen is accessible in both Software Versions 4.0 & 5.0. However the feature is not supported in these versions. Do not attempt to download any software files using this function on SW versions below 6.0.

When accessing the Configuration menu the first time, the list of system options will be shown. Refer to the following figure. Specify the options to configure by selecting the corresponding check boxes. Only the selected options will be available in the subsequent configuration pages.

ACUSON X300

US11-104.850.01.12.02 02.11



Service Software Home Menus NOTE

21

The “Attached to Network” is the default setting. In the case of SW version 5.0, check the “System Management” option to make System Management Agent available. For SW version 6.0.02 and above, the “System Management” option has been removed. The management agent is available as “IBC” under the configuration listing

Fig. 12: Configuration Screen - System Options

The Configuration menus are available after the system option is selected and are used to edit or enter the data value for software configuration. If a data value has not assigned, it will be displayed as a blank.

Local Host

0

Site Information Screen The Local Host section provides a set of functions that allow for entering general site information. The following figure illustrates the Site Information screen.


US11-104.850.01.12.02 02.11


ACUSON X300

22


Fig. 13: Site Information Screen

The following table lists the fields and comments located on the Site Information screen. Tab. 5

ACUSON X300

Site Information Screen

FIled Titles

Characteristics

Hospital Name

The hospital name entered here is displayed on the Service Software Home menu.

Hospital Location

Enter the building or room number in which the system is located.

Customer ID

Enter the identity number of the responsible individual.

Customer Name

Enter the name of the individual who is responsible for the system.

Memo

Enter additional information that must be associated with the system.

US11-104.850.01.12.02 02.11




23

Service & Time Zone Screen (Supported from SW version 4.0) This item allows the CSE to enter site-specific information for easy identification of their system. 1. Enter the information and click Save.

Fig. 14: Service & Time Zone Screen - Service Tab. 6

Service Information Screen

Field Titles

Comments

Remote Service Select the location of the Siemens Remote Service Server, to which Center the system shall be connected for remote service. This selection is used for the right configuration of the SRS routing (SRS IP-address). Worldwide there exist three SRS Server for three different time zones: Europe (used for Europe, Africa and Middle East) USA (used for North- and South America) Asia (used for Asia and Australia) Service Center


Enter the location of the Service Center responsible for this system in this box. This information is required for the generation of automatic reports.

US11-104.850.01.12.02 02.11


ACUSON X300

24

Service Software Home Menus Field Titles

Comments

Site Identification Number

The syntax of the ID is different in each country, and can be found in the Service Management System. The ID is used to define the local system in the Service Center.

Service Center Phone

Enter the phone number of the appropriate service center.

2. Click the Next button. The Time Zone Setting screen is displayed.

Fig. 15: Service & Time Zone Screen - Setting Time

If the CSE selects NTP Time Server (Network Time Protocol) box, the IP address of the NTP server for the customer's site may not be entered. In this case, the date and time manually will not be able to be entered. NOTE

A check is performed to determine if the time provided by the NTP server is within the date and time range of the application licensees. If not, the NTP server will not be accepted.

If no NTP server (Network Time Protocol) is available, manually enter the Time zone, date and time. In addition, Daylight Time should be set to automatic.

ACUSON X300

US11-104.850.01.12.02 02.11




25

System Information Screen The following figure shows the System Information screen.

Fig. 16: System Information Screen


US11-104.850.01.12.02 02.11


ACUSON X300

26

Service Software Home Menus Tab. 7

Service Information Screen

Field Titles

Comments

Product (Model) Name

Product name entered here is displayed on the Service Software Home menu.

Product Serial Number

Product Serial Number is displayed here.

Product Part Number

This number is filled in automatically according to the region.

Region

It displays the region where the system is located.

System use Time

Click Reset to set the system time usage to zero.

Service Use Time (Day) Click Reset to set the system time usage to zero Inspection Schedule Information message display

Check this check box and select the next time to display the message for inspection schedule.

Reset User Accounts (DIMAQ)

Click the Reset button to reset.

Filter Maintenance (supported from SW version 4.0)

Can enable/disable the air filter alert and set the schedule for the next alert.

The following figure shows the Inspection Schedule Information message.

Fig. 17: Inspection Schedule Information Message

TCP/IP LAN (supported in SW version 1.0/2.0) The following figure shows the TCP/IP LAN screen.

ACUSON X300

US11-104.850.01.12.02 02.11




27

Fig. 18: TCP/IP LAN Screen

In this section computer name and other network configuration information is displayed. DMS Information Screen (Supported from SW version 4.0)


NOTE

If the system has been static IP enabled, the system also needs the DNS server information in [Configuration > DNS] for USD Remote Lite application.

NOTE

The DNS server information can be lost after SW upgrade or installation. If the system lost DNS server information, enter the information again into [Configuration > DNS].

US11-104.850.01.12.02 02.11


ACUSON X300

28


Fig. Fig. 19: 19: TCP/ TCP/IP IP LAN LAN Scr Scree een n - DNS DNS

1. Click Use the following DNS server addresses addresses and and enter the DNS IP information. 2. Click Save Save,, then the following message is displayed displayed in FIgure 20, below. b elow. OK, then the system will be restarted automatically. 3. Click OK, NOTE

If the DNS server information is entered with “Obtains DNS server address automatically” checked, the DNS server information will not be saved even though the system is rebooted with the System Reboot message.

Fig. Fig. 20: 20: Syst System em Reb Reboo oott Mess Messag age e

ACUSON X300

US11-104.850.01.12.02 02.11




29

Routing Screen The Configure Gateway screen makes it possible to configure the static route rou te to the SRS on systems with software versions 4.0 and 5.0. 5.0 .

Fig. Fig. 21: 21: Rout Routin ing g Scre Screen en

Enter the IP address of the SRS gateway (SRS Router) to create a static route. Skip this configuration if the SRS gateway is already configured as default gateway in section( tion(TCP TCP/IP /IP LAN LAN (supporte (supported d in SW versi version on 1.0/2.0) 1.0/2.0) / p. 26 26)). The Test button verifies the connection to the gateway gat eway by a ping command. Remote Service Center shows the target SRS to whom the system belongs to according to the time zone of the system location. It is selected and configured in the Service & Time Zone menu. The Test Test Route button verifies the connection to the SRS Access Server by a ping command.

NOTE


If the ping fails, it may not be a problem in the network itself. It may also be caused by an automatic suppression of the ping, because of security reason. Please contact the network administrator in this type of case, if the connection to the SRS cannot be established successfully successfully.. Also, if the connection is not established, the Routing setting will not be saved.

US11-104.850.01.12.02 02.11


ACUSON ACUSON X300

30


In case of using software version 6.0 and above, use OS shell feature to test a “ping” to the server. The OS shell feature is available at the “Utility” menu under service page. Refer to (Ex Exit it to OS Sh Shel elll / p. 84 84)).

LIcensing & Components Screen The following figures shows the Licensing & Components screen.

Fig. Fig. 22: 22: Licens Licensing ing & Compo Componen nents ts Scre Screen en

ACUSON X300

US11-104.850.01.12.02 02.11




31

LIcensing & Components Items

Field Titles

Comments

Feature

Name of the installed license is displayed here.

Version

Version of the installed license is displayed here.

Expire Date

Expiration date of the installed license is displayed here. If it’s permanent, permanent is displayed.

Status

The status tells the corresponding feature is available or not in the current system.

The following figure shows the screen when “Select New License File” is selected. In this section, the license file can be found by using Browse button, or searching for the hard drive history.

Fig. 23: Licensing & Components Screen

NOTE


During the import of a licenses file, a backup of the original file will be copied into the History directory. The date-time stamp will be added to the file name. If the new license file fails, The previous license file history may be re-imported.

US11-104.850.01.12.02 02.11


ACUSON X300

32


In case the import of the new license file fails, selecting the license file from history menu item provides the possibility to import the backup of the original license file from the history directory.

Hardware Screen The following figure shows the Hardware screen.

Fig. 24: Hardware Screen

This section shows the hardware information such as Hardware ID, Hardware ID type, S/N, Rev, IVK list.

Service

0

The Service section provides a set of options that allow the configuration of Remote Diagnostics functions (Auto Report, File Tools).

ACUSON X300

US11-104.850.01.12.02 02.11




33

Mail Screen This menu item allows the configuration of the mail target for the Auto Report function and for the Service center provided in the Customer User Interface at Option - Remote Service. A target is defined by a mail server and a mail account on that server and may be reachable via LAN, e.g., a router, or via RAS, e.g., a modem. The procedure is performed in two steps. First, configure the host name and IP address and RAS settings (only if the target is accessible via modem) of the mail targets. Then enter the e-mail address for this server. For the Siemens Remote Server (SRS), enter an e-mail address known at the mail server connected to the Siemens Remote Server. The following figures show the Main screen.

Fig. 25: Mail Screen - 1st Screen

Every field has to be filled in with Host data, especially, ensure the mail server TCP/IP data is entered into the TCP/P address field.

NOTE


The host name may contain up to 15 characters. The characters [_] and [-] should be avoided, since they could cause problems (even though it is possible to enter them).

US11-104.850.01.12.02 02.11


ACUSON X300

34


Main Items 1st. Screen

Field Titles

Comments

Host Name

Enter the host name of the mail target.

Find

Select the Find button to check whether the host name is known at the WINS or the Domain Name Server (DNS). If the name is found, the IP address is entered in the TCP/IP address box.

TCP/IP Address If no DNS is used, manually enter the IP address into these boxes. RAS requires two IP addresses - one for the local system and the second for the remote system. For RAS, enter the second IP address. Test

Select the Test button to send a PING command to the corresponding IP address. A TCP/IP ping may fail for the following reasons: •

The remote host is turned off or not in the same network (or subnet), or the gateway is not configured.

•

TCP/IP address is configured incorrectly.

•

Any networking device (router, switch, bridge,...) denies access to the other network.

If the mail target is connected via a router, select the LAN button. If the target mail server is to be accessed via modem, select the RAS radio button. The following menu items are activated if there is an RAS connection:

ACUSON X300

US11-104.850.01.12.02 02.11




35

Main Items LAN/RAS

Field Titles

Comments

Phone Number

Enter the modem phone number of the remote mail target. It is recommended to use a comma (“,“) to separate the number to be dialed to get an outside line from the phone number.

PPP Login Script

The logical name used for the script for automatic login to the remote RAS (mail) target is displayed and does not need to be changed.

PPP Domain

The logon domain in the remote network is currently not used by the Siemens Remote Server.

PPP Account

Enter the login user name used for authentication on the remote system. For the Siemens Remote Server, the PPP account (Pmr9999) should be the combination of capital “P“, the lower case modality type “mr“, and the serial number, e.g., “9999“. This entry is case-sensitive. The same account has to be entered at the Siemens Remote Server. It is checked when logging into the Siemens Remote Server.

PPP PassEnter the login password used for authentication on the remote sysword/Verify PPP tem. This entry is case-sensitive and needs to be known at the SiePassword mens Remote Server. The following figure shows the 2nd screen of the Mail Option. Every filed needs to be filled in with proper data on this screen. Also, ensure that the receiver’s E-mail address is filled into the E-mail address field.


US11-104.850.01.12.02 02.11


ACUSON X300

36


Fig. 26: Mail Screen - 2nd Screen Tab. 11

ACUSON X300

Mail Items 2nd Screen

Field Titles

Comments

Selecting the Logical Name

Select the "Select Logical Name" drop-down menu to see whether the mail target is already listed. Otherwise, enter it in the "Logical Name" menu item.

Logical Name

This name is used by the Auto Report tool for target selection.

Main Server Host Selection

Select the corresponding host name for the system used as the mail target that was defined in the previous menu.

E-mail Address

Enter the mail address of the mail server desired for the auto report (for example) to be sent. For the Siemens Remote Server, enter an account name at the server that defines where the auto reports should be stored. Usually the account depends on the modality (e.g., rdiag_ct). If an auto repor t is desired (for example) to a particular mail address at headquarters, enter any mail address e.g. ([email protected]) instead of the account name.

US11-104.850.01.12.02 02.11




37

The check box for E-mail Address in the Remote Service Access Control Window is shown in only SW 1.0/2.0/3.0 version but not supported.

Configuring Mail Services This section is only necessary for systems that use the pro-active Auto Reporting mechanism. If ACUSON X300 system will not be configured with pro-active Auto Reporting, skip this section. 1. Select Presets > Service > Service. 2. Enter the level-7 service password and selectOK. 3. Select Configuration > Mail. 4. Define the SRS host name. NOTE

Tab. 12

The SRS regional local hosts are pre-configured in SW version r6.0 or higher.

SRS Regional Local Host Settings

Country

Rdiag Server Name

IP of Access Server

Europe/Africa

LUX09505

194.138.39.18

North/South America

SRSACC1

129.73.116.92

Asia

SGPT806X

194.138.243.178

5. Select the LAN check box for the connected by section. 6. Click Save. 7. Select > to move on the Mail target (2nd) screen. NOTE


Regional settings might need to be configured. Use regional documentation or contract USC or TSC centers.

US11-104.850.01.12.02 02.11


ACUSON X300

38

Service Software Home Menus 8. Select a logical name for the Select Logical Name, the system will populate the host name and e-mail address based on the logical name selection. Tab. 13

SRS Regional Email Addresses

Region

Logical Name

Host Name

E-mail Address

Europe/Africa

monioring_hq_europe

LUZ09505

[email protected]

North/South America

monitoring_hq_america

SRSACC1

[email protected]

Asia

monitoring_hq-asia

SGPT806X

[email protected]

9. Click Save. The system displays the following message: mail properties successfully saved.

FTP Screen This menu item allows the configuration of the file transfer target (FTP) for the Auto Report and for the File Tools function. A target is defined by an FTP server and a FTP account on that server and may be reachable via LAN (e.g., a router), or via RAS (e.g., a modem). 1. Configure the host name and IP address and RAS settings (only if the target is accessible via modem) of the FTP targets. 2. Enter the DTP account for the server. The following figure shows the FTP screen.

ACUSON X300

US11-104.850.01.12.02 02.11




39

Fig. 27: FTP Screen - 1st Screen

Every field has to be filled in with Host data, especially the mail server TCP/IP data has to be entered into the TCP/P address field.

NOTE


The host name may contain up to 15 characters. The characters [_] and [-] should be avoided, since they could cause problems (even though it is possible to enter them).

US11-104.850.01.12.02 02.11


ACUSON X300

40


FTP Items 1st Screen

Field Titles

Comments

Host Name

Enter the host name of the mail target.

Find

Select the Find button to check whether the host name is known at the WINS or the Domain Name Server (DNS). If the name is found, the IP address is entered in the TCP/IP address box.

TCP/IP Address If no DNS is used, then manually enter the IP address into these boxes. RAS requires two IP addresses - one for the local system and the second for the remote system. For RAS, enter the second IP address. Test

Select the Test button to send a PING command to the corresponding IP address. A TCP/IP ping may fail for the following reasons: •


•

TCP/IP address is configured incorrectly.

•


If the mail target is connected via a router, select the LAN button. If the target FTP server is to be accessed via modem, select the RAS radio button. In case of an RAS connection, the following menu items are activated:

ACUSON X300

US11-104.850.01.12.02 02.11




41

Main Items LAN/RAS

Field Titles

Comments

Phone Number

Enter the modem phone number of the remote mail target. It is recommended to use a comma (“,“) to separate the number to be dialed to get an outside line from the phone number.

PPP Login Script

The logical name used for the script for automatic login to the remote RAS (mail) target is displayed and does not need to be changed.

PPP Domain

The logon domain in the remote network is currently not used by the Siemens Remote Server.

PPP Account

Enter the login user name used for authentication on the remote system. For the Siemens Remote Server, the PPP account (Pmr9999) should be the combination of capital “P“, the lower case modality type “mr“, and the serial number, e.g., “9999“. This entry is case-sensitive. The same account has to be entered at the Siemens Remote Server. It is checked when the Siemens Remote Server is logged into.

PPP PassEnter the login password used for authentication on the remote sysword/Verify PPP tem. This entry is case-sensitive and needs to be known at the SiePassword mens Remote Server. The following figure shows the second screen of the FTP section. Ensure that every field is properly filled in.


US11-104.850.01.12.02 02.11


ACUSON X300

42


Fig. 28: FTP Screen - 2nd Screen Tab. 16

FTP Items 2nd Screen

Field Titles

Comments

Selecting the Logical Name

Select the "Select Logical Name" drop-down menu to see whether the FTP target is already listed. Otherwise, enter it in the "Logical Name" menu item.

Logical Name

This name is used by the Auto Report and File Tools for target selection.

FTP Host Selection

Select the corresponding host name for the system used as the FTP target that was defined in the previous menu.

FTP User

Enter the FTP account on the transfer target server where the images file is desired (for example) to be sent.

Password

Enter the password for the FTP user account on the transfer target server and confirm it in the next box.

Configuring FTP Service Configure the file transfer protocol (FTP) target for the Auto Report and for the File & Image Tool functions from the FTP screen.

ACUSON X300

US11-104.850.01.12.02 02.11




43

1. Select Presets > Service > Service. 2. Enter the level-7 service password and Click OK. 3. Select Configuration > FTP. 4. Click ‘ > ‘ to move to the FTP target (second page) screen. 5. Define the Logical Name of FTP target: NOTE

Tab. 17

The FTP host name and IP addresses for the SRS routers (LAN) are pre-configured in SW version r6.0 or higher.

FTP Host and Logical Name by Region

Global Zone

FTP Host

Logical Name - FTP Target

Europe (Fürth)

LUX09505

ftp2lux09505

North / South America (Newark)

SRSACC1

ftp2srsacc1

Asia (Singapore)

SGPT806X

ftp2sgpt806x

6. Type: rdiagftp in the FTP User field. 7. Type: siemens in the Password field. 8. Type: siemens in the Password confirmation field. 9. Select Save>Finish>Home. Auto Transfer Screen NOTE

For the FTP User name and password, always use lower case letters. Using uppper case letter will cause the file transfer to fail.

If the customer agrees, automatic transfer (i.e., without user interaction) of auto reporting messages or System Management Event messages may be enabled here. Deactivate these options if the customer does not want automatic transfer of auto reporting messages.


US11-104.850.01.12.02 02.11


ACUSON X300

44


Fig. 29: Auto Transfer Screen

System Management

0

System Management enables additional service functionality like proactive event monitoring and software distribution. For this functionality, the so-called Managed Node Package (MNP), which delivers the required agents on the system, is pre-installed. The System Management configuration specifies the back-end server, then installs all the agents and activates them.

NOTE

ACUSON X300

The System Management is supported from SW version 4.0.

US11-104.850.01.12.02 02.11




45

Master Screen NOTE

The system management option is provide as IBC from SW version 6.0.02 and above. The major dfference between the MNP and the IBC is the way they establishing a connection. Refer to (US11-104.843.01 / Siemens Remote Services Configuration R6.0.02 and Above) for details.

In this mask, the automatically assigned System Management Master Server (server name and IP address), which is taken from the selected Remote Service Center in the Service & Time Zone mask, is shown.

Fig. 30: Master Screen

Define Other If a different System Management Master Server needs to be configured for test purposes or if the server differs from the predefined one, this check-box is marked. This allows the user to fill in the differing Software Distribution Server IP Address in the IP entry field.


US11-104.850.01.12.02 02.11


ACUSON X300

46

Service Software Home Menus Server Network Address Translation The three (3) listed servers (Asset, Event, Software Distribution Server) are the back-end servers for the System Management functions. In a standard network environment, the IP addresses for these servers are retrieved from the SD Server already configured during the registration procedure. In some cases, the network administration only allows their own address range, which would consequently sup press any traffic with the original IP address. Therefore, the Server Network Address Translation box must be checked and addresses within the allowed address range must be entered for each server. Local Host Network Address Translation If the on-site router for the SRS connection uses NAT (Network Address Translation), this check-box is selected, and the NAT IP address assigned to the original IP address, as shown in the first field, has to be reentered into the enabled address entry field. The Test button initiates a PING command to the configured SD Server IP address. A TCP/IP ping may fail for the following reasons: •


•

The TCP/IP address is configured incorrectly.

•


NOTE

The Reset button is available only if a value has been changed. Use the Next button to switch to the Agent Control page, keeping the entered values. Use the Go button on the Agent Control page to save the System Management Configurations. The Save button can only be used if the System Management Server is online.

Agent Controls Screen In this mask, may stop and start the System Management agents. The Event Management agent and the Software Distribution agent are combined within the so called Manage Node Package, which needs to be installed to enable the System Management functionality.

ACUSON X300

US11-104.850.01.12.02 02.11




47

Fig. 31: Agent Control Screen

Activated With this check-box, the System Management agents can be started (and stopped). Installed With this check-box, the System Management agents are installed. The progress of the installation is shown with a progress bar at the status bar (duration approximately 15 min). Unchecking the installed check-box means de-installation of the System Management agents. The Manage Node Package is completely removed from the system. Status The user sees the status of the agents, a link can be clicked on to get additional information whenthe status value is underlined.


US11-104.850.01.12.02 02.11


ACUSON X300

48


Diagnostics

5.3

Access the Diagnostics screen by selecting the Diagnostics located on the Home Menu screen as follows.

Fig. 32: Selection Diagnostics Menu

The Diagnostics screen has 6 categories; Auto Test (or Manual Test), Report, POST, Pattern Test, Control Panel Test, and Check Disk. The following figure shows the Diagnostics screen.

ACUSON X300

US11-104.850.01.12.02 02.11




49

Fig. 33: Diagnostics Screen

NOTE

When the user logs on the service software with SAL 1, Auto Test is displayed instead of Manual test. Refer to (Service Access Level (SAL) Strategies / p. 11).

Manual Test

0

When the user logs on the service software with SAL 7, 8, or 9, “Manual Test” is displayed instead of “Auto Test”. On the Manual Test screen, the check boxes are arranged according to hierarchy levels. They are displayed adjacent to their related test targets. Select All button enables to test all packages. Otherwise, The reset button enables the removal of the check mark from the selected targets. Checking a box will enable testing of the targets. Placing a check in a single box will cause only that target to be tested.


US11-104.850.01.12.02 02.11


ACUSON X300

50

Service Software Home Menus For the Manual Test, perform the following steps: 1. When the check marks have been entered in the boxes for the targets, clickStart to test the selected targets.

Fig. 34: Manual Test Screen in Diagnostics

2. When the dialog pop-up box appears, click theOK button. The Manual Test will begin.

Fig. 35: Diagnostics Pop-up Dialog Box

3. There will be pop-up dialog boxes from SW version 3.0.

ACUSON X300

US11-104.850.01.12.02 02.11




51

The attached transducers must be removed from the system before the TR transmit test and receive test. However, only one transducer must be connected to the LC1 (the right port) again before the B-mode test.

Fig. 36: Transmit Test

Fig. 37: Receive Test

Fig. 38: B-Mode Test


US11-104.850.01.12.02 02.11


ACUSON X300

52

Service Software Home Menus 4. Wait until the progressive bar gets filled. If you wish to stop during the test, clickAbort.

Fig. 39: Running Manual Test

After the progress bar reaches 100%, the following pop-up window displays.

Fig. 40: Reboot Request Window

5. Click OK button and the system reboots automatically. CAUTION

System Malfunction May Occur 

ACUSON X300

During the operation of Auto Test or Manual Test, pressing any key is not recommended, especially the “Home or Close” buttons for safety reasons. This caution also applies when the system is executed in the Remote Service Software Access mode.

US11-104.850.01.12.02 02.11




53

When the Auto Test or Manual Test is completed, and the pop-up message for reboot comes up, ensure to the system is restarted. Also use the Abort button if the Auto Test or Manual Test needs to be aborted in the middle of the operation.

Report

0

Perform the following steps to Report. 1. Click Diagnostics on the Service Software Main screen. 2. Select Report.

Fig. 41: DIagnostics - Report Screen


US11-104.850.01.12.02 02.11


ACUSON X300

54

Service Software Home Menus 3. Select the item to report within the drop-down list.

Fig. 42: Selection Report Item List

ACUSON X300

US11-104.850.01.12.02 02.11




55

The test results are shown in the following figure.

Fig. 43: Test Results Shown in Report Screen

4. When the report procedure is completed, click Close to exit. NOTE

At least one transducer muat be connected on the right side port during the B-Mode testing in order to get the expected test image. If the CSE connects more than two transducers, the system priority uses the port located on the right side.

Post (Power On Self Test)

0

This performs fundamental diagnostics during system power-up. Decide the frequency of the test schedule and click on the appropriate radio button as a preference.


US11-104.850.01.12.02 02.11


ACUSON X300

56


Fig. 44: Test Schedule Screen

The user can determine the test schedule among the following time periods: •

Daily

•

Weekly

•

Monthly

•

Off

•

Every bootup

ACUSON X300

US11-104.850.01.12.02 02.11




57

Post List

Segment

Function

Front End

•

Real Time controller memory test

•

Receive beam former ASIC built in self test

•

Transmit pulse generator ASIC built in self test

•

TR FPGA memory test

•

Transducer interface memory test

•

Digital receiver ASIC built in self test

•

RMP FPGA memory test

RMP_mem

•

BEEcho processor ASIC built in self test

EP_Bist

•

BEFlow processor ASIC memory test

FP_FPGA_mem

•

BEFlow processor FPGA memory test SC_mem BEScan converter ASIC memory test SIP_mem

Back End

•

File Name RTC_memRC_BF _BistTxpg_BistTR _memTI_memDR _Bist

FP_mem.dui

•

DF FPGA memory test

DSP_mem

•

BEDigital signal processor memory test

VP_mem

•

BEVP FPGA memory test VI

Pattern Test

0

Access the Pattern Test screen by clicking Pattern Test on the Diagnostics screen. Through this test, the VCR, printer, and the monitor of the system can be adjusted. The following figure shows the Pattern Test screen.


US11-104.850.01.12.02 02.11


ACUSON X300

58


Fig. 45: Pattern Test Screen

Select the desired test screen from the Pattern Test screen. To return to the Pattern Test screen, click the displayed screen independently of location.

ACUSON X300

US11-104.850.01.12.02 02.11




59

Fig. 46: Colorbar Pattern Test

Fig. 47: Graybar Pattern Test


US11-104.850.01.12.02 02.11


ACUSON X300

60


Fig. 48: Linearily Pattern Test

Fig. 49: Resolution Pattern Test

ACUSON X300

US11-104.850.01.12.02 02.11




61

Fig. 50: SMPTE Pattern Test

Fig. 51: Black Pattern Test


US11-104.850.01.12.02 02.11


ACUSON X300

62


Fig. 52: Gray20 Pattern Test

Fig. 53: White Pattern Test

ACUSON X300

US11-104.850.01.12.02 02.11




63

Control Panel Test

0

1. Select CP Test, and click on the Start Button. The Control Panel Test screen is displayed.

Fig. 54: Selection CP Test


US11-104.850.01.12.02 02.11


ACUSON X300

64


Fig. 55: Control Panel Test Screen

When a button, key, or knob (including DGC slide) on the actual control panel is clicked, the corresponding feature is pressed (or moved) on the Control Panel Test Screen. 2. To test LED operations of the actual control panel, click the blank boxes (or a box desired to be checked) of the buttons and knobs (except Key Board and DGC slides) on the Control Panel test screen.

Fig. 56: CP Test LED Selection

ACUSON X300

US11-104.850.01.12.02 02.11




65

3. Verify the selected LED has been lit on the actual control panel. The LED illumination can be adjust to blink, high intensity, low intensity, or off, by selecting the desired buttons below.

Fig. 57: CP Test LED Control

4. To test buttons and knobs (except the Key board and DGC slides) on the control panel with beep sound, adjust the Volume and Time (duration) of the Beep Sound field. the duration of beep sound can be controlled from 0.1 sec. to 1.0 sec.

Fig. 58: CP Test Beep Sound


US11-104.850.01.12.02 02.11


ACUSON X300

66


Check Disk

0

Follow the procedures below to check the system disk. 1. Select the CheckDisk from the Diagnostics drop down list as shown.

Fig. 59: Selection Check Disk

ACUSON X300

US11-104.850.01.12.02 02.11




67

2. Enter the desired disk drive name within the Parameter field, then clickStart button.

Fig. 60: Selection Drive to Check


US11-104.850.01.12.02 02.11


ACUSON X300

68

Service Software Home Menus The following figure shows an example of C drive check. User entered C: into the Parameter field, then clicked Start button. The result of the C drive check is displayed as following.

Fig. 61: Check Disk Result - 1st Screen

ACUSON X300

US11-104.850.01.12.02 02.11




69

Fig. 62: Check Disk Result - 2nd Screen

NOTE


The Check Disk test is available for a single drive at once. Therefore, only one drive name has to be entered within the parameter field.

US11-104.850.01.12.02 02.11


ACUSON X300

70


File Tools

5.4

1. Access the File Tools screen by clicking File Tools from the Service Home Menu screen.

Fig. 63: Selection File Tools Screen

ACUSON X300

US11-104.850.01.12.02 02.11




71

The following procedures show an example of the File Tools. In this case, the user sets “File” as a source, and “Transfer from system” as an action.

Fig. 64: File Tools Screen


US11-104.850.01.12.02 02.11


ACUSON X300

72


Fig. 65: File Tools Screen Example

The following table shows the source items and action items that can be chosen from File Tools. Tab. 19

FIle Tools Lists

Source

Action

File

Transfer from system Transfer to system Extract only

Download List

Show/Delete

Extract List

Transfer from system Show/Delete

Transfer List

ACUSON X300

Show/Delete

US11-104.850.01.12.02 02.11




73

Backup & Restore

5.5

1. Access the Backup & Restore screen by clicking Backup & Restore from the Service Home Menu screen.

Fig. 66: Selection Backup & Restore Menu

NOTE


For the detail information, refer to (US11-105.816.01 / Backing Up Data) and (US11-103.816.01 / Restoring Data).

US11-104.850.01.12.02 02.11


ACUSON X300

74


Service Image

5.6

1. Access the Service Image screen by clicking Service Image menu from the Service Home Menu screen.

Fig. 67: Selection Service Image Menu

ACUSON X300

US11-104.850.01.12.02 02.11




75

The Service Image screen is displayed.

Fig. 68: Screen Capture Images Screen

The captured images by user are displayed in this menu. From this screen the user obtains the image information such as file name and capture date. Tab. 20

Screen Capture Images Screen Items

Field

Comment

Information

It shows the file name and the captured date of the selected file.

Zoom

It zooms in/out the selected file.

Archive

It collects the selected service image.

When the check box of Conduct “Screen Capture” with “Save Log” checkboxes are activated, the screen capture image will be saved with save log files. For details on “Save Log” functions refer to (US11-109.840.01 / Save Logs).


US11-104.850.01.12.02 02.11


ACUSON X300

76


ACUSON X300

The archive function will zip the selected images to the following path: C:\syngo_lite\Service\extract. Archive images will be saved along with log files by checking the “Save Log” checkbox or [Ctrl + Alt + S].

US11-104.850.01.12.02 02.11




77

Auto Report

5.7

1. Access the Service Image screen by clicking Auto Report menu from the Service Home Menu screen.

Fig. 69: Selection Auto Report Screen

In this section, customize the particular template according to the user preference. The following table shows the auto report items and selections that can be chosen from the auto report menu. Tab. 21

Auto Report Items

Items

Selections

Source

Event Log File

Severity

All Information Warning Error


US11-104.850.01.12.02 02.11


ACUSON X300

78

Service Software Home Menus Items

Selections

Mode

Time Triggered Event Triggered

Domain

Application Customer Log Security System

Mail

with no attachment will full attachment with partial attachment as separate file(s) as separate file(s) without mail.

The following figure shows an example of the user defined template.

Fig. 70: Auto Report Screen

2. After entering the field data, click on theSave button. The template is then created as customized.

ACUSON X300

US11-104.850.01.12.02 02.11




79

Utilities

5.8

1. Access the Utilities menu by clicking Utilities from the Service Home Menu screen.

Fig. 71: Selection Utilities Shown


US11-104.850.01.12.02 02.11


ACUSON X300

80

Service Software Home Menus The following figure shows the Utilities screen.

Fig. 72: Utilities Screen

Three fields are displayed on the Utilities Screen: Installation Software, Disk Defragmentation, Manage User Accounts. When the Service Software is accessed with SAL 7, 8, or 9, Exit to OS Shell menu will be displayed also.

Install Software

0

When the Install Software menu is selected, the following message is displayed.

Fig. 73: System Reboot Request Message

For more details about software installation, refer to (US11-101.816.01 / ACUSON X300 Software Installation).

ACUSON X300

US11-104.850.01.12.02 02.11




81

Disk Defragmentation

0

DIsk defragmentation allows the analyzation and defragmentation of the selected disk.

Fig. 74: Disk Selection for Defragmentation


US11-104.850.01.12.02 02.11


ACUSON X300

82

Service Software Home Menus 1. Select the desired disk and click Analyze button. The following screen is displayed.

Fig. 75: Disk Analyzing in Progress

ACUSON X300

US11-104.850.01.12.02 02.11




83

When analyzation is completed, the following pop-up message appears.

Fig. 76: Analyzation Complete Message Shown

2. Click the Defragment button to perform the disk defragmentation.

Manage User Accounts

0

View and configure user accounts in this section. Select Manage User Accounts. The following screen is displayed.


US11-104.850.01.12.02 02.11


ACUSON X300

84


Fig. 77: Manage User Accounts Screen

Exit to OS Shell

0

When the service software is accessed with SAL 7, 8 or 9, Exit to OS Shell menu is displayed from the drop-down list as seen below.

ACUSON X300

US11-104.850.01.12.02 02.11




85

Fig. 78: Exit to OS Shell Screen

The following figure shows an example of the Exit to OS Shell screen. The Command is set as Directory Usage, and Parameter field is set as ‘C:’.


US11-104.850.01.12.02 02.11


ACUSON X300

86


Fig. 79: Exit to OS Shell Screen

It is also possible to check network connections, configurations and settings by using OS commands such as “IPConfig” and “Ping” at NT command Interpreter.

ACUSON X300

US11-104.850.01.12.02 02.11




87

Fig. 80: NT Command Interpreter Screen


US11-104.850.01.12.02 02.11


ACUSON X300

88


Remote Updating of the Software

5.9

The installation of non-critical software packages can be coded to be installable by the system user without any CSE support. As soon as those packages are completely transferred from the software distribution server to the system (push mode), the user is notified during the system startup by a SD User Interface (pop-up) that a software package is available for installation and the user can accept the installation or decide how to proceed with it. 1. Power on the system and wait for it to boot up. Notice the current system software version is shown in the lower left corner of the screen.

Fig. 81: X300 Startup Screen Shown

ACUSON X300

US11-104.850.01.12.02 02.11




89

2. When the system starts it automatically checks whether or not a new software package is pending for installation. The following screen will appear.

Fig. 82: Siemens Remote Services Software Distribution Screen

All the information in the Software Distribution screen is provided by the package itself. Without any user action, the UI stays on the screen for a specified time period, as shown in the bottom of the Software Distribution screen. After this time period elapses, the software installation request is still shown in the form of the icon in the syngo Status bar, where it can be called up at anytime. Description of the action items in the SD User Interface: - Yes Starts the installation of the software package and a progress bar is shown as well. - Defer The SD User Interface is closed, which means that the installation is postponed and that the user will be requested to install the package at the next system startup or the user can invoke it again through the icon in the Status bar. 3. Select Yes button on the screen below if you want to update the software. NOTE


As long as the software package is not installed, the Software Distribution window will be displayed after each system boot, asking you to carry out the installation.

US11-104.850.01.12.02 02.11


ACUSON X300

90


It is recommended that the software installation be carried out immediately. If an installation has to be postponed, ensure the software is installed at the first opportunity.

Fig. 83: Software Distribution Screen Shown

ACUSON X300

US11-104.850.01.12.02 02.11




91

4. The system starts the installation of the software package and displays the progress bar showing the remaining time.

Fig. 84: Software Distribution Screen with Progress Bar Shown


US11-104.850.01.12.02 02.11


ACUSON X300

92

Service Software Home Menus 5. When the installation of the software package has been completed successfully, a corresponding message will be displayed. Select the OK button. Refer to figure below.

Fig. 85: Software Distruibution Screen - Update Successful Message

NOTE

ACUSON X300

If the installation of the software package failed for any reason, the information on the failed installation will be automatically forwarded via remote to Siemens UPTIME Service Center for resolution action.

US11-104.850.01.12.02 02.11




93

The system will automatically start the reboot sequence. The updated system software version is shown in the lower left corner of the start up screen.

Fig. 86: System Automatically Reboots

6. Select Ok to restart and apply the new configuration.


US11-104.850.01.12.02 02.11


ACUSON X300

94

Service Software Home Menus 7.

Fig. 87:

System Reboot Window Shown

8. Select Yes on the Presets message window to continue.

Fig. 88: Presets Message Window Shown

ACUSON X300

US11-104.850.01.12.02 02.11




95

9. Once the system has finished the reboot sequence, and the imaging screen has appeared, select the Preset key on the control panel keyboard.

Fig. 89: Imaging Mode Screen Shown


US11-104.850.01.12.02 02.11


ACUSON X300

96

Service Software Home Menus 10. Select Service from the Presets screen.

Fig. 90: Presets Screen Shown - Service

ACUSON X300

US11-104.850.01.12.02 02.11




97

11. When the Service Screen appears, check to ensure the system displays the updated system software version correctly.

Fig. 91: Service Screen Shown - Update Version

NOTE


In the event of a software package installation failure, contact the UPTIME Service Center for further information and support.

US11-104.850.01.12.02 02.11


ACUSON X300

98


Event Log

5.10

1. Access the Event Log screen by clicking Event Log on the Service Home Menu screen.

Fig. 92: Selection Event Log Screen

For more details about the Error Log, refer to (US11-104.840.01 / Accessing Diagnostics) and (US11-104.840.01 / Event Log Messages).

ACUSON X300

US11-104.850.01.12.02 02.11



Changes to Previous Version

99

6-

6ChangestoPrevious Version

Change(s)

Description

Revision 12

Added version notes concerning SW version 6.0.02 and above. Removed “Software Distribution” chapter.

Revision 11

Added “Remote Updating of the Software” section.

Revision 10

Added sections for Configuring FTP in “Service Software Home Menus” section.Removal of the Remote Application Support chapter

Revision 09

Changed paragraph and Figure 102 in the “Install” section.

Revision 08

Updated for X300 r5.0.

Update

Addition of references to ACUSON X300 Premium Edition.

Update

Replaced System Interconnection Diagrams

Update

Relaced System Interconnection Diagram

New document.

Initial Release.


US11-104.850.01.12.02 02.11


ACUSON X300

Acuson X300 Syngo Service Information 741-7384

Recommend Documents