311650907-Siemens-Acuson-x300.pdf

ACUSON X300 US

Software System Loading Software

© Siemens Siemens AG

Siemens MedicalSolutions ejt Ultrasound

Print No.: US11-101.816.01.01.02 Replace Replaces: s: n.a. Part No.: sd

2006

The reproduction, transmission or use of this document or its contents is not permitted without express written authority. Offenders will be liable for damages. All rights, including rights created by patent grant or registration of a utility model or design, are reserved.

English Doc. Gen. Date: 09.06 n.a.

2

Revision / Disclaimer

1Revision /Disclaimer

Copyright Copyright © 2006 by Siemens Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in retrieval systems, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior written permission of Siemens Corporation. Siemens Corporation reserves the right to change its products and services at any time. In addition, this manual is subject to change without notice. Siemens Corporation welcomes customer input on corrections and suggestions for improvements improvements to this manual.Although Siemens Corporation has attempted to ensure accuracy throughout this manual, Siemens Corporation assumes no liability for any errors or omissions, nor for any damages resulting from the application or use of this information. Trademarks ACUSON, Sequoia, Cypress, AEGIS, Aspen, 128XP, XP, AcuNav, CV70, SONOLINE, SONOVIST SONOVISTA, Adara, Antares, G20, G20 , G40, G50, G60S, X300, X500, Omnia, Premier and KinetDx are trademarks of Siemens Corporation Co rporation registered in the th e U.S. Patent Patent and TradeTrademark Office. CWS3000, DS3000, WS3000, and WebPro are trademarks of Siemens Corporation. Windows XP, XP, 2000 and NT are registered trademarks of Microsoft Corporation. Internet Inter net Explorer is a trademark of Microsoft Corporation. Netscape and Netscape Navigator are registered trademarks of Netscape Communications Corporation. Java and the JavaScript name are registered trademarks of Sun Microsystems, Inc. Adobe Acrobat is a registered trademark of Adobe Systems, Inc. Other products and brand names are trademarks of their t heir respective owners. Disclaimer The service of equipment described herein is to be performed by qualified personnel who are employed by Siemens or one of its affiliates or who are otherwise authorized autho rized by Siemens or one of its affiliates to provide such services. Assemblers and other persons who are a re not employed by or otherwise directly affiliated with or authorized by Siemens or one of its affiliates are directed to contact one of the local offices of Siemens or one of its affiliates before attempting installation or service prop rocedures. License Agreement All computer programs copyright 1990-2006 by Siemens Cor poration or its suppliers. Programs are licensed under the following agreement: Siemens or its suppliers retain(s) ownership of and an d title to any computer program supplied with the equipment and to the trade secrets embodied in such computer programs. Sub ject to the Buyer’s Buyer’s acceptance and fulfillment of the obligations in this paragraph, Siemens grants the Buyer a personal, non-transferable, perpetual, non-exclusive license to use any computer program supplied with the Equipment that is necessary to operate the Equipment solely on the medium in which such program is delivered for the purpose of operating the equipment in accordance with the instructions set forth in the operator’s manuals supplied with the Equipment and for no other purpose pur pose whatsoever. Buyer Buyer may not reverse-assemble, reverse-assemble, reverse-compile reverse-compile or otherwise reverse-engineer such computer programs nor may Buyer make make a copy of such program or apply any techniques to derive the

ACUSON X300

US11-101.816.01.01.02 09 . 06

Page 2 of 32 sd

Siemens Medical Medical Solutions Solutions USA, Inc. Inc.

2


1Revision /Disclaimer

Copyright Copyright © 2006 by Siemens Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in retrieval systems, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior written permission of Siemens Corporation. Siemens Corporation reserves the right to change its products and services at any time. In addition, this manual is subject to change without notice. Siemens Corporation welcomes customer input on corrections and suggestions for improvements improvements to this manual.Although Siemens Corporation has attempted to ensure accuracy throughout this manual, Siemens Corporation assumes no liability for any errors or omissions, nor for any damages resulting from the application or use of this information. Trademarks ACUSON, Sequoia, Cypress, AEGIS, Aspen, 128XP, XP, AcuNav, CV70, SONOLINE, SONOVIST SONOVISTA, Adara, Antares, G20, G20 , G40, G50, G60S, X300, X500, Omnia, Premier and KinetDx are trademarks of Siemens Corporation Co rporation registered in the th e U.S. Patent Patent and TradeTrademark Office. CWS3000, DS3000, WS3000, and WebPro are trademarks of Siemens Corporation. Windows XP, XP, 2000 and NT are registered trademarks of Microsoft Corporation. Internet Inter net Explorer is a trademark of Microsoft Corporation. Netscape and Netscape Navigator are registered trademarks of Netscape Communications Corporation. Java and the JavaScript name are registered trademarks of Sun Microsystems, Inc. Adobe Acrobat is a registered trademark of Adobe Systems, Inc. Other products and brand names are trademarks of their t heir respective owners. Disclaimer The service of equipment described herein is to be performed by qualified personnel who are employed by Siemens or one of its affiliates or who are otherwise authorized autho rized by Siemens or one of its affiliates to provide such services. Assemblers and other persons who are a re not employed by or otherwise directly affiliated with or authorized by Siemens or one of its affiliates are directed to contact one of the local offices of Siemens or one of its affiliates before attempting installation or service prop rocedures. License Agreement All computer programs copyright 1990-2006 by Siemens Cor poration or its suppliers. Programs are licensed under the following agreement: Siemens or its suppliers retain(s) ownership of and an d title to any computer program supplied with the equipment and to the trade secrets embodied in such computer programs. Sub ject to the Buyer’s Buyer’s acceptance and fulfillment of the obligations in this paragraph, Siemens grants the Buyer a personal, non-transferable, perpetual, non-exclusive license to use any computer program supplied with the Equipment that is necessary to operate the Equipment solely on the medium in which such program is delivered for the purpose of operating the equipment in accordance with the instructions set forth in the operator’s manuals supplied with the Equipment and for no other purpose pur pose whatsoever. Buyer Buyer may not reverse-assemble, reverse-assemble, reverse-compile reverse-compile or otherwise reverse-engineer such computer programs nor may Buyer make make a copy of such program or apply any techniques to derive the

ACUSON X300

US11-101.816.01.01.02 09 . 06

Page 2 of 32 sd

Siemens Medical Medical Solutions Solutions USA, Inc. Inc.


3

trade secrets embodied therein. In the th e event of a failure by Buyer to comply with the terms of this license, the license granted by this paragraph pa ragraph shall terminate. Further, Furthe r, because unauthorized use of such computer programs will leave Siemens without an adequate remedy at law, Buyer agrees that injunctive or other equitable relief will be appropriate to restrain such use, threatened or actual. Buyer further agrees that (i) any of Siemens"s suppliers of software is a direct and intended beneficiary of this end-user sublicense and may enforce it directly against Buyer with respect to software supplied by such supplier, supp lier, and (ii) No supplier of Siemens shall be liable to buyer for any general, special, direct, indirect, consequential, incidental or other damages arising out of the sublicense of the computer programs supplied with the equipment.

Siemens Medical Medical Solutions Solutions USA, Inc.

US11-101.816.01.01.02 09 . 06

Page 3 of 32 sd

ACUSON X300

4

Table of Contents

1-

0Tableof Contents

1 _______ Loading System Software_________________________________________ 5 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Disk Partition Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Setup Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Tools and Materials. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Reference Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Time Required. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

2 _______ Verify System Software___________________________________________ 7 Verify the System Software Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

3 _______ Loading System Software_________________________________________ 9 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Setup Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Tools and Materials. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Reference Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Time Required. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Verify the System Software Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Backing Up Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Installing the System Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Configuring Peripheral Video and Language Format . . . . . . . . . . . . . . . . . . . . . . . . 21 Verifying Software Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Check/Update the Firmware and BIOS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Verify the Software Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Confirming the Product Serial Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Restore the Presets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Sleep Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 System Configuration: Hardware Version 2.0 - Software Version 2.0. . . . . . . . . . . . 27 System Configuration: Hardware Version 1.0 - Software Version 2.0. . . . . . . . . . . . 28

4 _______ Changes to Previous Version _____________________________________ 31 Changes to Previous Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

ACUSON X300

US11-101.816.01.01.02 09.06

Page 4 of 32 sd

Siemens Medical Solutions USA, Inc.

Loading System Software

5

2-

Overview 1Loading System Software

0

The instructions below describe how to load system software on the system. Observe the following Caution alerts before proceeding.

CAUTION

If the system software will be upgraded (or downgraded to an earlier version) for testing or to resolve an operational problem, the feature keys for options that are not supported by the installed version will be lost. To avoid this problem, uninstall all feature keys before upgrading or downgrading the system software. See (US07-102.892.01 / Uninstalling the Product Feature Keys) for details. 

Be sure that all feature keys are properly re-installed after upgrading (or downgrading) software.

Disk Partition Map

0

The table shows the disk par tition map. Tab. 1

System Disk Partition Map

Partition Name Partition Siz

File System

Contents

C:

NTFS

•

Remains

•

D:


60 GB

US11-101.816.01.01.02 09.06

NTFS

Page 5 of 32 sd

Windows XP Software (including DIMAQ, syngo, SCR 3D)

Patient data and image files (including Quick Set and Imaging Preset).

ACUSON X300

6


Setup Requirements

0

Tools and Materials

0

Standard service tools Installation CD / DVD

Reference Documents

0

None

Time Required

0

Approximately 30 minutes is required to load software. More time will be required if the customer’s data is backed up.

ACUSON X300

US11-101.816.01.01.02 09.06

Page 6 of 32 sd


Verify System Software

7

3-

Verify the System Software Version 2VerifySystem Software

0

Use the following instructions to verify the system software version of ACUSON X300 ultrasound system. 1. Power on the system and wait for the system to boot up. 2. Press Presets. The Preset Main Menu displays.

Fig. 1:

Preset Main Menu


US11-101.816.01.01.02 09.06

Page 7 of 32 sd

ACUSON X300

8

Verify System Software 3. Select Service. The Main Service Menu displays.

Fig. 2:

Service Main Screen

4. Verify the system SW version information. 5. Record the system SW Version information. 6. Select Cancel to exit.

NOTE

ACUSON X300

Before starting a software installation, make a backup copy of the user-defined settings and the patient database. After loading the system software, customize the setting of video and language format by following the procedure in US11-101.816.01 Installing the System Software.

US11-101.816.01.01.02 09.06

Page 8 of 32 sd



9

4-

Overview 3Loading System Software

0

The instructions below describe how to load system software on the ACUSON X300. Observe the following Caution alerts before proceeding.

CAUTION

If the system software will be upgraded (or downgraded to an earlier version) for testing or to resolve an operational problem, the feature keys for options that are not supported by the installed version will be lost. To avoid this problem, uninstall all feature keys before upgrading or downgrading the system software. See (US11-102.816.01 / License Key Installation) for details. 

Be sure that all feature keys are properly re-installed after upgrading (or downgrading) software.

Feature keys do not have to be uninstalled. Experienced customer service engineers (CSEs) may choose to leave the keys installed. The software generally consists of system Presets and system software. •

System Presets (on CD-1)

•

System software (on CD-1 and CD-2)


US11-101.816.01.01.02 09.06

Page 9 of 32 sd

ACUSON X300

10


Setup Requirements

0

Tools and Materials

0

Standard service tools

Reference Documents

0

None

Time Required

0

Approximately 30 minutes is required to load software. More time will be required if the customer’s data is backed up.

ACUSON X300

US11-101.816.01.01.02 09.06

Page 10 of 32 sd



11

Verify the System Software Version

0

Use (Verify System Software / p. 7)to verify the software version before proceeding.


US11-101.816.01.01.02 09.06

Page 11 of 32 sd

ACUSON X300

12


Backing Up Data

0

•

Back up the data, see (US11-104.816.01 / Backing Up Data)

•

Back up the presets, see (US11-104.816.01 / Backing Up Data)

•

Back up the customers data, see ((US11-104.816.01 / Backing Up Data)

ACUSON X300

US11-101.816.01.01.02 09.06

Page 12 of 32 sd



13

Installing the System Software

0

1. Power on the system and wait for it to boot up completely. 2. Press Preset. The Preset Main Menu displays.

Fig. 3:

Preset Main Menu


US11-101.816.01.01.02 09.06

Page 13 of 32 sd

ACUSON X300

14

Loading System Software 3. Select Service from the menu on the left side of the screen.

Fig. 4:

ACUSON X300

Service Main Menu

US11-101.816.01.01.02 09.06

Page 14 of 32 sd



15

4. Select Service from the Main Menu.

Fig. 5:

Select Service from the Service Menu

5. The Authentication Screen displays.


US11-101.816.01.01.02 09.06

Page 15 of 32 sd

ACUSON X300

16

Loading System Software 6. Enter the password, then select OK. The Service Main Menu displays.

Fig. 6:

ACUSON X300

Authentication Screen

US11-101.816.01.01.02 09.06

Page 16 of 32 sd



17

7. Select Utilities to display the Utilities menu.

Fig. 7:

Select Utilities from the Service Menu


US11-101.816.01.01.02 09.06

Page 17 of 32 sd

ACUSON X300

18

Loading System Software 8. Select Install Software to install software.

Fig. 8:

Select Install Software from the Utilities Menu

The following message displays while the software is installing.

Fig. 9:

Installation Message

9. Insert the installation CD / DVD into the CD / DVD-R/RW drive.

ACUSON X300

US11-101.816.01.01.02 09.06

Page 18 of 32 sd



19

10. Click OK. The system automatically reboots.

Fig. 10: Reboot Screen

11. After the automatic reboot, the system prompts for the type of upgrade to perform.

Fig. 11: Software Install DOS Screen

- Upgrade/Update Installation retains the current presets. - Clean/Factory Installation initializes the presets and all patient studies are erased.


US11-101.816.01.01.02 09.06

Page 19 of 32 sd

ACUSON X300

20

Loading System Software NOTICE

Selecting Clean/Factory Installation erases all patient studies from the hard disk drive. 

Be sure to back up all patient studies before selecting Clean/Factory Installation.

12. Choose the desired upgrade. If a choice is not made in 30 seconds, the system will default to Upgrade/Update Installation. 13. After approximately 7-8 minutes, the system will display a pop-up window asking for the second CD. The CD tray will open. Remove the first CD and insert the second.

Fig. 12: Symantec Ghost CD Install

14. After approximately five more minutes, the upgrade is complete, the system will reboot. After the system completes the reboot, verify the system software version as described in (Verify the System Software Version / p. 7). 15. Press Preset, then select Service --> Configuration --> License & Components to confirm newly installed software version.

ACUSON X300

US11-101.816.01.01.02 09.06

Page 20 of 32 sd



21

Configuring Peripheral Video and Language Format

0

1. Press Preset and select Basic System 1 from the left side of the Preset Main screen.

Fig. 13: Language Format Selection

2. Select the Language Format from the Format pane according to customer need. Be sure that all feature keys are properly re-installed after upgrading (or downgrading) software. 3. Select Save.


US11-101.816.01.01.02 09.06

Page 21 of 32 sd

ACUSON X300

22

Loading System Software 4. Select Peripheral from the left side of the Preset Main screen.

Fig. 14: Peripherals Main Menu

5. Select the Video format from the Peripheral pane according to customer need. 6. Select Save. 7. Restart the system.

ACUSON X300

US11-101.816.01.01.02 09.06

Page 22 of 32 sd



23

Verifying Software Operation

0

Use the following instructions to verify that the software is operational and to restore data.

Check/Update the Firmware and BIOS

0

During this last phase of the software installation, the system checks the revision level of the firmware and BIOS, updating them if necessary.

Verify the Software Installation

0

Before continuing, verify the system is now running the new software. 1. Power on the system and wait for the system to boot up. 2. Press the Preset key to display the Preset Main Menu.

Fig. 15: Preset Main Menu

3. Select Service to display the Service Main Menu.


US11-101.816.01.01.02 09.06

Page 23 of 32 sd

ACUSON X300

24

Loading System Software 4. The system information section of the service preset menu displays the current software version. Verify the system software version.

Fig. 16: Verify System Software Version

Confirming the Product Serial Number

0

1. Confirm that no warning message is displayed on the monitor. 2. Press the Preset key on the keyboard. 3. Select Service in the left pane of the Preset menu. 4. Verify that the correct software version is displayed.

ACUSON X300

US11-101.816.01.01.02 09.06

Page 24 of 32 sd



25

5. At the product information screen, verify that the correct product Serial No. is displayed: the number displayed on the product Information screen should be identical to the product Serial Number recorded on the label attached to the rear of the product.

Fig. 17: Location of System Serial Number

6. If necessary, restore the Presets according to (US11-104.816.01 / Backing Up Data) and perform the instructions in reverse fashion. 7. If necessary, restore the service data. Refer to (US11-104.816.01 / Backing Up Service Data) and perform the instructions in reverse fashion. 8. If necessary, restore the Feature keys according to the instructions found in (US11-102.816.01 / License Key Installation).

Restore the Presets NOTE


0

Note: This procedure is only required when if a backup CD was created prior to software installation.

US11-101.816.01.01.02 09.06

Page 25 of 32 sd

ACUSON X300

26

Loading System Software 1. Display the Service menu in the Preset. - Press the Preset key. - Select Service in the left pane of the Preset menu. - Select Go. - Select Backup & Restore icon in the Service menu window. - Select Restore. The system will request the back-up disc you have made. 2. Insert the Backup CD in the CD-R/W drive and wait approximately ten seconds for the CD to spin up. 3. Select Restore on the pop-up window to start. The system will display “Restore is completed” message. 4. Select Ok and remove the backup CD. - The system will display “Shutdown before the system starts restoring” message. 5. Select Ok to confirm. 6. Close Backup &Restore and select Exit twice to return to the preset menu. 7. Shutdown the system manually and wait for it to shut down 8. Restart the system.

ACUSON X300

US11-101.816.01.01.02 09.06

Page 26 of 32 sd



27

Sleep Mode

0

The Sleep Mode option is a part of software version 2.0. It can be installed on systems configured with hardware versions 1.0 or 2.0. The Sleep Mode setup is different for each system hardware version. Use the set of instruction that apply to the system software and hardware configuration.

System Configuration: Hardware Version 2.0 - Software Version 2.0 NOTE

0

After installing software version 2.0, the default status of Sleep Mode is inactive. To activate Sleep Mode, select the Show field of the Preset Sleep Mode Option.

1. Press the Preset key. The system displays the Preset Main Menu. 2. Select Service from the Presets menu. The system displays the Service Authentication screen. 3. Enter the password and select Go. The system displays the Service Main Menu. 4. Select Configuration. The system displays the Configuration screen. 5. Select System from the Configuration menu. 6. Select Preset Sleep Mode Option. See (Fig. 18 / p. 27) for location of the option.

Fig. 18: System Information Screen > Preset Sleep Mode Option


US11-101.816.01.01.02 09.06

Page 27 of 32 sd

ACUSON X300

28

Loading System Software The system will display the “Enable Sleep Mode” option on Preset Main Menu, Basic System 1 screen. 7. Select the Save button. The system saves the changes. 8. Select the Close button. The system displays to the Preset Main Menu. 9. Verify the Enable Sleep Mode option is selected. See (Fig. 19 / p. 28) for location of the option.

Fig. 19: Preset Menu > Basic System 1 > Enable Sleep Mode

System Configuration: Hardware Version 1.0 - Software Version 2.0 NOTE

0

Systems with hardware configuration version 1.0 do not have the sleep mode function. Therefore, there is no need to display the “Enable Sleep Mode” function on Preset Main Menu screen. If the system hardware includes the DC/DC power supply (MN: 10010385) and control panel firmware, the Sleep Mode function can be deactivated by deselecting “Enable Sleep Mode”.

1. Press the Preset key. The system displays the Preset Main Menu.

ACUSON X300

US11-101.816.01.01.02 09.06

Page 28 of 32 sd



29

2. Select Service from the Preset Menu. The system displays the Service Authentication screen. 3. Enter the password and select Go. The system displays the Service Main Menu. 4. Select Configuration. The system displays the Configuration screen. 5. Select System from the Configuration menu. 6. Deselect the Preset Sleep Mode Option.

Fig. 20: System Information Screen > Preset Sleep Mode Option

The system hide the “Enable Sleep Mode” option unavailable on Preset Main Menu, Basic System 1 screen. 7. Select the Save button. The system saves the changes. 8. Select the Close button. The system displays to the Preset Main Menu.


US11-101.816.01.01.02 09.06

Page 29 of 32 sd

ACUSON X300

30

Loading System Software 9. Verify the Enable Sleep Mode option is not displayed. See (Fig. 21 / p. 30) for location of the hidden option.

Fig. 21: Preset Menu > Basic System 1 > Disable Sleep Mode

ACUSON X300

US11-101.816.01.01.02 09.06

Page 30 of 32 sd


Changes to Previous Version

31

5-

Changes to Previous Version 4ChangestoPrevious Version

0

Change(s)

Description

New document

Initial document.


US11-101.816.01.01.02 09.06

Page 31 of 32 sd

ACUSON X300

311650907-Siemens-Acuson-x300.pdf

Recommend Documents