iConverter
®
iConverter ® XM5 Network Interface Device Carrier Ethernet 2.0 Compliant 10 Gigabit NID The iConverter ® XM5 is a 10G Network Interface Device (NID) that provides service demarcation and aggregation for Carrier Ethernet 2.0 services. The XM5 XM5 provides comprehensive support of the latest carrier-class Ethernet Service OAM, testing and protection standards. These advanced capabilities enable rapid service deployments, Service Level Agreement (SLA) assurances, comprehensive fault management and service protection to reduce operating costs and improve customer satisfaction. The XM5 features three 10G SFP+ or XFP ports and up to four SFP or RJ-45 gigabit ports for UNI or NNI deployments to deliver wholesale Ethernet, 4G/LTE mobile backhaul, business and cloud services. The XM5 can be deployed as a node on a 10G ring with ports for Gigabit and 10G spoke links, or as a demarcation NID on a 10G access link with aggregation UNI ports for multiple tenants or cell towers. The XM5 can be deployed to deliver a variety of 10G and gigabit services, and simplies operations by reducing the need to inventory inventory multiple NID models. Gigabit SFPs SFPs can be installed in the 10G ports to provide a seamless upgrade path to future 10G services.
In this application example, an iConverter XM5 NID is d eployed as a mini-aggregation node on a 10G Metro Ethernet ring that provides connectivity to the ring and three ber access links to customer locations. iConverter GM4 GM4 NIDs terminate terminate the gigabit ber links and provide service demarcation at each customer premise. The other XM5 NID terminates the 10G ber access link and provides demarcation at a multiple tenant building with four SFP UNIs for ber connectivity to different subscribers.
■ MEF Carrier Ethernet 2.0 Compliant 10 Gigabit and 1000Mbps Carrier Ethernet NID ■ Smallest full-function 10G NIDs available with the lowest power consumption ■ Service Assurance with comprehensive Performance Monitoring and Connectivity Fault Management ■ Rapid service deployments with Zero-Touch Provisioning and Ethernet Service Activation Testing ■ Ethernet Protection Switching with sub-50ms failover ■ SNMP management with NetOutlook ® Management Software ■ Available with with redundant, hot-swappable hot-swappable AC or DC power inputs ■ Commercial (0 to 50ºC), wide (-40º to 60ºC) and extended (-40º to 75ºC) temperature ranges In this application example, iConverter XM5 NIDs are deployed as nodes on a 10G wireless backhaul ring. The XM5 on the left is connected to the Wireless Backhaul Network, and provides NNI demarcation between the Wireless Carrier network and the Access Access Provider network ring. All XM5 NIDs on the ring ring support G.8032v2 Ethernet Ring Protection Switching for service protection with sub-50ms failover failover.. The XM5 NIDs on the right provide ring connectivity with gigabit and 10G access links (spokes) to cell towers with 1588v2 Packet Timing Protocol.
INTERFACE CONFIGURATIONS
SERVICE OAM AND TESTING
■ 3x 10 Gigabit Ports: 10GBASE-R ber XFP or SFP+, and 10G ports also support Gigabit SFPs
■ IEEE 802.1ag End-to-End Connectivity Fault Management (CFM) – with 8 Maintenance Domain levels and 256 Maintenance Associations
■ 4x 1 Gigabit Ports: 1000BASE-X/100BASE-FX ber SFP or 10/100/1000BASE-T RJ-45 copper (available with none, 2 or 4 gigabit ports)
■ Supports IEEE 802.1ag Maintenance Intermediate Points (MIPs) for fault isolation
■ SFP, SFP+ and XFP transceivers for standard, CWDM or DWDM wavelengths
■ Hardware-based Delay and Loopback measurement with nanosecond resolution
■ Port Mirroring
■ ITU-T Y.1731 End-to-End Performance Monitoring
TRAFFIC MANAGEMENT
■ ITU-T Y.1731 threshold monitoring and threshold crossing alerts
■ IEEE 802.1Q VLAN tagging and 802.1ad Q-in-Q VLAN stacking
■ Advanced classication and ltering of Layer 1, 2, 3 or 4 subscriber trafc as an EVC or CoS ow*
■ Service Multiplexing of over 256 EVCs
■ IEEE 802.3ah Ethernet Link OAM with dying gasp
■ User-congurable Ethertype for NNI port
■ Zero Touch Provisioning
■ Ingress and Egress trafc management
■ RFC 2544 with wire-speed, per ow testing of throughput, latency, jitter and loss
■ CIR/EIR Color Aware “two rates, three colors” bandwidth proles for ingress rate limiting
■ ITU-T Y.1564 Ethernet Service Activation testing with multi-ow testing of information rate, latency, jitter and frame loss*
■ Hierarchical Rate Limiting with two level color aware policing ■ Advanced Flow and CoS classication per Port, VLAN ID, PCP or IPv4/IPv6 (TOS/DiffServe) Priority ■ Layer 2 Protocol Tunneling (L2PT) to encapsulate STP, VTP, PVST and CDP protocols (subscriber CISCO protocols)
■ RFC 2544 and ITU-T Y.1564 test head support generation/reception of in-service and out-of-service L2, L3 and L4 frames ■ Per-port and per-ow Loopback with MAC swap ■ Compatible with third party in-band loopback testing
■ All ports congurable as UNI or NNI ■ 10,056 byte frames
■ Built-in UTP cable tester for troubleshooting through to the Customer Equipment
NETWORK MANAGEMENT
SYNCHRONIZATION AND TIMING
■ Remote management via TELNET, SSH, SNMPv1/v2c/v3
■ ITU-T G.8262 Synchronous Ethernet*
■ SNMP management of up to 100,000 NIDs with NetOutlook ® Element Management System
■ IEEE 1588v2 Boundary Clock*, Slave Clock* and Transparent Clock
■ SNMP management via Omnitron’s NetOutlook ® Network Management software
■ NTP – Network Time Protocol
■ LLDP – Link Layer Discovery Protocol
PROTECTION AND RESILIENCY
■ MEF 30 and 31 Service OAM Fault Management MIBs
■ ITU-T G.8031 Ethernet Linear Protection Switching
RACK MOUNT SHELF
■ ITU-T G.8032v2 Ethernet Ring Protection Switching with multi-ring protection and sub-ring support
■ 1U high (1.75”) Rack Mount Shelf accomodates up to two XM5 NIDs ■ Multiple grounding points and convenient locations for cable ties to organize and secure cabling
■ Sub-50ms failover for G.8031 and G.8032v2 ■ Link Failover 50ms protection switching ■ Rapid Spanning Tree Protocol
* Future Release
iConverter XM5
Page 2
SPECIFICATIONS Description
Standard Compliances
Management
ORDERING INFORMATION 96 x x - x x - x x x
XM5 10G Network Interface Device
iConverter
IEEE 802.1Q, 802.1ad, 802.1p, 802.3, 802.3ah, 802.1ag, 1588v2 RFC 2819 (RMON), 2863 (IF-MIB), 2131 (DHCP), 2544 ITU-T G.8031, G.8032, G.8262, Y.1731, Y.1564 MEF 30, 31, Carrier Ethernet 2.0 **
W
Wide Operating Temperature Range
Z
Extended Operating Temperature Range
Telnet, SNMPv1, SNMPv2c, SNMPv3, SSH, Serial Console
Standard Operating Temperature Range
Single Power Input
2
Redundant Power Inputs
B
External Universal AC Power Supply
Regulatory Compliances**
UL, CE, FCC Class A, NEBS Level 3, RoHS2, WEEE
C
18-60VDC Isolated Terminal Power
Frame Size
Up to 10,056 bytes
00
No Gigabit Ports
02
Two 10/100/1000BASE-T RJ-45 Ports
04
Four 10/100/1000BASE-T RJ-45 Ports
20
Two 100/1000BASE-X SFP Ports
40
Four 100/1000BASE-X SFP Ports
Copper: Fiber:
Port Type
RS-232 (RJ-45)
Copper: (Management)
10/100/1000BASE-T (RJ-45)
Fiber:
AC Power Requirements
Temperature
Dimensions
Three 10G SFP+ Por ts
9601
Three 10G XFP Por ts
8261-0
1U 19” Rack Mount Shelf for XM5 NIDs
8261-2
1U 23” Rack Mount Shelf for XM5 NIDs
Multimode: 50/125um, 62.5/125um Single-mode: 9/125um EIA/TIA 568 A/B, Category 3 and higher
Copper: (Management)
EIA/TIA 568 A/B, Category 5 and higher 100-240VAC~ 50-60Hz 0.6A @ 110VAC
2.5mm Barrel Connector:
12VDC Maximum power consumption 48W
3-Pin Terminal:
20VDC to 60VDC Maximum power consumption 48W
Commercial: Wide: Extended: Storage:
9600
Please consult Omnitron for other congurations.
EIA/TIA 568 A/B, Category 5 and higher
Serial: (Management)
AC Power Adapter:
DC Power Requirements
1000BASE-X (Gigabit and 100Mbps SFPs) 10GBASE-R (SFP+, XFP, and SFP for Gigabit)
Serial: (Management)
Copper:
Cable Type
10/100/1000BASE-T (RJ-45)
0 to 50° C -40 to 60° C -40 to 75° C -40 to 80° C
W: 7.29” x D: 9.15” x H: 1.63” L: 185.17mm x B: 232.41mm x H: 41.4mm
Weight
3.24 lbs (1.47 kg)
Humidity
5% to 95% (non-condensing)
Altitude
-100m to 4,000m (operational)
Warranty
3 year warranty
**Compliances pending
© 2014 Omnitron Systems Technology, Inc. All rights reserved. iConverter and NetOutlook are registered trademarks of Omnitron Systems Technology, Inc. Trademarks are owned by their respective companies. Specifcations subject to change without notice. 091-19600-001-A 6/14
800-675-8410 • 949-250-6510 • www.omnitron-systems.com • [email protected] • 38 Tesla, Irvine, CA 92618 iConverter XM5
Page 3
