Step 1: ONU Register [Application Example] Enable PON port 0/5 automatic authorization function: Raisecom(fttx)#interface olt 0/5 Raisecom(fttx-olt0:5)#automatic-authorization enable Check whether the onu has registered successfully Raisecom#show interface onu online Distance ONU ID State LLID RTT(TQ) (m) Login Date Logout Date ------------------------------------------------------------------------------0/5/1 online 2 44 1 2000-01-02,05:32 1970-01-01,08:00
Step 5: Configure the port rate on ONU [Application Example] Uni 1 on onu 0/5/1 is used to rate-limit the end user Raisecom#fttx
Raisecom(fttx)#interface onu 0/5/1 Raisecom(fttx-onu0/5:1)#storm-control all disable Raisecom(fttx-onu0/5:1)#uni ethernet 1 Raisecom(fttx-onu-uni0/5/1:1)#policing ingress enable
Raisecom(fttx-
onu-uni0/5/1:1)#policing ingress cir 1024 Raisecom(fttx-onu0/5:1)#sla cir 1024 Raisecom(fttx-onu0/5:1)#sla pir 1024
onu-uni0/5/1:1)#policing egress cir 1024 If you test Ethernet port tate-limit, need to disable downstream limitation of pon port. Make policing downstream disable Raisecom(fttx-onu0/8:1)#no policing rate Set successfully