Cadena de transmisión para construir una moto Chopper para mejorar habilidades en SolidWorks. Tutorial completo de todas las partes del motor incluida...
Cadena de transmisión para construir una moto Chopper para mejorar habilidades en SolidWorks. Tutorial completo de todas las partes del motor incluidas.
Full description
dfgv
chain register
Deskripsi lengkap
AlatDeskripsi lengkap
value chain
Deskripsi lengkap
The Blockchain-based Digital Content Distribution System
Full description
assignment on value chainFull description
lesson planFull description
Surving
chainmaille tutorial
Full description
Brand Value Chain
calculations
.
Questions and answers for supply chainFull description
Value Chain Analysis for Cassava ProductionFull description
| Page
Chain Open a new part with model units set to millimeters. Select the three planes in the feature tree and make them visible by clicking on the glasses. Select the Front Plane and create a sketch by clicking on the 2D Sketch icon Draw the sketch as shown on the picture. The origin should be in the middle of the biggest circle.
Rename the sketch Double click on Sketch1 in the feature tree and change the name into: Path Chain Close the sketch Select the Front Plane again and create a new sketch. Draw the sketch as shown in the picture. Create an extrude Go to: Insert > Boss/Base > Extrude Direction 1 Change
: Midplane into 19 mm
Click OK | Page
Select the green surface of Extrude1 as shown in the picture. Create a new sketch Draw the sketch as shown in the picture.
Create an extrude Go to: Insert > Boss/Base > Extrude Direction 1 Change
: Blind into 2 mm
Ensure that the offset is directed outwards as shown in the picture. If not, click “Reverse direction”
Click OK Select the green surface of Extrude2 as shown in the picture. Create a new sketch Draw the sketch as shown in the picture.
| Page
Create an extrude Go to: Insert > Boss/Base > Extrude Direction 1 Change
: Blind into 2 mm
Ensure that the extrude is directed inwards Click OK Create a radius on the edges of the green sur faces Select the green surfaces as shown in the picture. Go to: Insert > Features > Fillet/Round
> 0,2 mm
Click OK Mirror Extrude2 and Extrude3 Go to: Insert > Pattern/Mirror > Mirror Mirror Face/Plane
: Front Plane
Features to Mirror
: Extrude2, Fillet1 , Extrude3
Click OK
| Page
The first link of the chain is finished now. Now we’re going to create the entire chain.
Create a Curve Driven Pattern Go to: Insert > Pattern/Mirror > Curve Driven Pattern Pattern Direction
: Select the ”Path Chain” sketch
Number of instances Change
: 64
: 30,26 mm
Curve method: Offset curve Alignment method: Tangent to curve Bodies to Pattern
: Extrude1, Mirror1
Click OK
The chain is almost ready now. But there is one switch missing.
Create the last switch Select the Front Plane and create a new sketch. Select the green inner circle of the open switch as shown in the picture. Go to: Tools > Sketch Tools > Convert Entities The inner circle is copied and fixed now. | Page
Create an extrude Go to: Insert > Boss/Base > Extrude Direction 1 Change
: Midplane into 22 mm
Click OK
Create the last part of the link Select the green surface of the switch as shown in the picture.
Create a new sketch Draw the sketch as shown in the picture.
Create an extrude Go to: Insert > Boss/Base > Extrude Direction 1 Change
: Blind into 2 mm
Ensure that the extrude is directed inwards. Click OK | Page
Mirror Extrude5 Go to: Insert > Pattern/Mirror > Mirror Mirror Face/Plane
: Front Plane
Features to Mirror
: Extrude5
Click OK
Change the names of the planes Double click on the Front Plane in the feature tree. Change the name into: MIDPLANE CHAIN Double click on the Top Plane in the feature tree. Change the name into: CENTERPLANE CHAIN Double click on the Right Plane in the feature tree. Change the name into: FRONTPLANE CHAIN
Hide Save
all planes and sketches except: MIDPLANE CHAIN CENTERPLANE CHAIN FRONTPLANE CHAIN the file with the following name: Chain