ElectroFusion Fittings ENGLISH ESPAÑOL Product List and Technical Catalogue / Lista de productos y catálogo técnico
2013
G l o b a l
P r e s e n c e
-
L o c a l
C o m m i t m e n t
Introduction ElectroFusion System Table of Contents Fittings Wastewater Line Technical Specications
Controllers Installation Tools
Introducción 3 4-6 7 - 32 3 3 - 37 38 4 0 - 45 5 2 - 54
PLASSON, a worldwide leader in ttings for polyethylene pipes for over 40 years, now offers a complete line of
ElectroFusion products including: Plasson ElectroFusion
Sistema ElectroFusión Indice Accesorios Aguas residuales Especicaciones técnicas
Soldadoras automáticas Herramientas de instalación
3 4-6 7 - 32 33 - 37 39 46 - 51 52 - 54
PLASSON, líder mundial en accesorios para tuberías de polietileno desde hace más de 40 años, presenta ahora una línea completa de productos de electrofusión, entre ellos:
conectores, herramientas y soldadoras automáticas de
ttings, tools and control boxes. Plasson ElectroFusion products products combine to offer a reliable smart-system solution featuring fully computerized control and monitoring.
ElectroFusión. ElectroFusión. La combinación de productos ElectroFusion de Plasson ofrece una solución inteligente y conable que integra el control y la monitorización completamente computarizados.
PLASSON’s customers benet from the Company’s
Los clientes de PLASSON se benecian de los productos
quality products, expertise and worldwide rst-rate service in water, gas distribution and industrial applications.
de calidad, la pericia y el excelente servicio mundial de la compañía en instalaciones de distribución de agua y gas, y aplicaciones industriales.
Subsidiary Companies
Subsidiarias
Australia Plasson Australia (PTY) Ltd. E-mail:
[email protected] [email protected] www.plasson.com.au
Australia Plasson Australia (PTY) Ltd. E-mail:
[email protected] [email protected] www.plasson.com.au
France Plasson France S.A. E-mail:
[email protected] [email protected] www.plasson.fr
Francia Plasson France S.A. E-mail:
[email protected] [email protected] www.plasson.fr
Germany
Plasson GmbH
Alemania
Plasson GmbH
E-mail:
[email protected] [email protected] www.plasson.de
E-mail:
[email protected] [email protected] www.plasson.de
Italy
Italia
E-mail:
[email protected] [email protected] www.plasson.it
E-mail: info@ver.it www.ver.it
Spain Plasson Spain S.L. E-mail:
[email protected] [email protected] www.plasson.es
España Plasson Spain S.L. E-mail:
[email protected] [email protected] www.plasson.es
United Kingdom Plasson UK Ltd. E-mail:
[email protected] [email protected] www.plasson.co.uk
Reino Unido Plasson UK Ltd. E-mail:
[email protected] [email protected] www.plasson.co.uk
Poland Plasson Polska Sp.z o.o. E-mail:
[email protected] [email protected] www.plasson.pl
Polonia Plasson Polska Sp.z o.o. E-mail:
[email protected] [email protected] www.plasson.pl
USA
USA
Plasson Italia
IPF Industrial Pipe Fittings, LLC
E-mail: sales@hdpettings.com sales@hdpettings.com www.hdpettings.com 2
Plasson Italia
IPF Industrial Pipe Fittings, LLC
E-mail: sales@hdpettings.com sales@hdpettings.com www.hdpettings.com
Introduction ElectroFusion System Table of Contents Fittings Wastewater Line Technical Specications
Controllers Installation Tools
Introducción 3 4-6 7 - 32 3 3 - 37 38 4 0 - 45 5 2 - 54
PLASSON, a worldwide leader in ttings for polyethylene pipes for over 40 years, now offers a complete line of
ElectroFusion products including: Plasson ElectroFusion
Sistema ElectroFusión Indice Accesorios Aguas residuales Especicaciones técnicas
Soldadoras automáticas Herramientas de instalación
3 4-6 7 - 32 33 - 37 39 46 - 51 52 - 54
PLASSON, líder mundial en accesorios para tuberías de polietileno desde hace más de 40 años, presenta ahora una línea completa de productos de electrofusión, entre ellos:
conectores, herramientas y soldadoras automáticas de
ttings, tools and control boxes. Plasson ElectroFusion products products combine to offer a reliable smart-system solution featuring fully computerized control and monitoring.
ElectroFusión. ElectroFusión. La combinación de productos ElectroFusion de Plasson ofrece una solución inteligente y conable que integra el control y la monitorización completamente computarizados.
PLASSON’s customers benet from the Company’s
Los clientes de PLASSON se benecian de los productos
quality products, expertise and worldwide rst-rate service in water, gas distribution and industrial applications.
de calidad, la pericia y el excelente servicio mundial de la compañía en instalaciones de distribución de agua y gas, y aplicaciones industriales.
Subsidiary Companies
Subsidiarias
Australia Plasson Australia (PTY) Ltd. E-mail:
[email protected] [email protected] www.plasson.com.au
Australia Plasson Australia (PTY) Ltd. E-mail:
[email protected] [email protected] www.plasson.com.au
France Plasson France S.A. E-mail:
[email protected] [email protected] www.plasson.fr
Francia Plasson France S.A. E-mail:
[email protected] [email protected] www.plasson.fr
Germany
Plasson GmbH
Alemania
Plasson GmbH
E-mail:
[email protected] [email protected] www.plasson.de
E-mail:
[email protected] [email protected] www.plasson.de
Italy
Italia
E-mail:
[email protected] [email protected] www.plasson.it
E-mail: info@ver.it www.ver.it
Spain Plasson Spain S.L. E-mail:
[email protected] [email protected] www.plasson.es
España Plasson Spain S.L. E-mail:
[email protected] [email protected] www.plasson.es
United Kingdom Plasson UK Ltd. E-mail:
[email protected] [email protected] www.plasson.co.uk
Reino Unido Plasson UK Ltd. E-mail:
[email protected] [email protected] www.plasson.co.uk
Poland Plasson Polska Sp.z o.o. E-mail:
[email protected] [email protected] www.plasson.pl
Polonia Plasson Polska Sp.z o.o. E-mail:
[email protected] [email protected] www.plasson.pl
USA
USA
Plasson Italia
IPF Industrial Pipe Fittings, LLC
E-mail: sales@hdpettings.com sales@hdpettings.com www.hdpettings.com 2
Plasson Italia
IPF Industrial Pipe Fittings, LLC
E-mail: sales@hdpettings.com sales@hdpettings.com www.hdpettings.com
Plasson ElectroFusion System The Smart-System Solution You Can Depend On Plasson ElectroFusion Fittings Plasson ttings are specically designed for reliable, high performance pipe joining and long system life. This automated system has been proven to be most economical due to the low potential for operator error.
Tools and Control Box Plasson offers quality tools and control boxes allowing for easy installation. Plasson control boxes provide computerized ElectroFusion with minimal potential for operator error. The Plasson control boxes are the economical solution for reliable ElectroFusion.
The Smart System-Plasson ElectroFusion All Plasson products combine to form the latest state-of-the-art high performance pipe joining solution. Plasson ElectroFusion ttings are part of a complete ElectroFusion smart system. The entire ElectroFusion process is executed and fully monitored by the computerized control box. Everything is computer-controlled computer-controlled ensuring safe, dependable connections.
Plasson ElectroFusion Smart System Features
Superior Fitting Design increases joint integrity
Automatic Controller decreases potential operator error
Computerized Data Retrieval ensures quality control by Joint Data retrieval of
measurements and records
Compatibility between Plasson ElectroFusion and other ElectroFusion
systems through the computerized barcode system
Easy Installation using PLASSON’s PLASSON’s simple, practical tools
Plasson ElectroFusion ttings can be used with Plasson’s computerized smart system control box or with standard barcode systems. Each Plasson ElectroFusion tting comes complete with a barcode.
High Standards are ensured by the latest product testing methods
Advantages Stronger pipe joining joining - Plasson ElectroFusion quality ttings have long penetration depths and fusion zones which ensure high Economical - Economic benets are a result of overall integrated system quality and innovation including the quality joints. Most Economical Performance - Proven high performance in gas and computerized smart system which reduces the potential for operator error. High Performance Service - Plasson provides unmatched service based on over 40 years in the eld. water distribution and industrial applications. Superior Service -
Sistema ElectroFusion de Plasson La solución inteligente de conanza
Accesorios ElectroFusion de Plasson Los accesorios (“ttings”) de Plasson para tuberías han sido especialmente diseñados para asegurar conexiones ables, de alto rendimiento y prolongada vida útil. Se ha comprobado que este sistema automatizado es el más económico, gracias a la escasa probabilidad de errores por parte del operador.
Características del sistema inteligente ElectroFusion de Plasson
Control automático reduce la probabilidad de error humano
Recuperación de datos
Herramientas y soldadora automática de ElectroFusión Plasson ofrece herramientas de alta calidad y soldadoras automáticas que se instalan fácilmente. Las soldadoras, que proporcionan un proceso computarizado con mínima probabilidad de error humano, son la solución más económica para una electrofusión de máxima conanza.
calidad asegurada mediante la recuperación de datos de
mediciones y registros
Compatibilidad con el sistema ElectroFusion de Plasson y otros sistemas
ElectroFusion de Plasson - El sistema inteligente Los productos de Plasson se combinan para ofrecer la solución más avanzada y rendidora en la conexión de tuberías. Los accesorios ElectroFusion de Plasson forman parte de un sistema completo e inteligente. La soldadora automática de ElectroFusión está a cargo de la ejecución y la monitorización del proceso. El sistema controlado por computadora asegura conexiones seguras y conables.
Excelente diseño asegura la integridad de la conexión
de códigos de barras
Instalación sencilla mediante las herramientas prácticas y simples de PLASSON
Estándar elevado asegurado por los métodos de prueba de productos de última generación
Ventajas Uniones más resistentes resistentes - Los accesorios de alta calidad ElectroFusion de Plasson tienen grandes profundidades de penetración y económica - El benecio económico es el resultado zonas de fusión que aseguran juntas muy resistentes. La solución más económica de la calidad y la innovación del sistema computarizado totalmente integrado, que reduce la probabilidad de error humano. Alta performance performance - Elevado rendimiento comprobado en instalaciones de distribución de gas y agua, y aplicaciones industriales. Excelente servicio servicio - Plasson le brinda un servicio inigualado, con su pericia y experiencia de más de 40 años en el terreno.
3
Table of Contents / Índice
490104/490103
Page 7
Coupler Enlace Recto
4901L4
Page 8
Page 8
Page 9
Page 10
Page 10
Page 11
Page 11
Page 12
Page 12
Reducing Tee Enlace Reductor
46330
Page 15
46370
Page 15
490904
Page 16
491904
Page 16
491504
Page 16
Duckfoot Elbow 90° Codo 90° Empotrable
Page 13
Two Outlets Reducing Tee Enlace te Reductor con Salida Doble
491404
Page 15
Y Reducer Y Reductor
Tee 90° Enlace T 90°
492404
46060
Elbow 180° Codo 180°
Spigot End Plug Tapón Espiga
490404
Page 15
LightFit Elbow 15º Codo LightFit 15°
End Cap Tapón
491207
490804
LightFit Elbow 30º Codo LightFit 30°
Monolithic End Cap Tapón Monolitico
491204
Page 14
LightFit Elbow 45º Codo LightFit 45°
Spigot Reducer Reductor Espiga
494204
490604
Elbow 22.5° Codo 22.5°
Reducing Coupler Enlace Reductor
491107
Page 14
Elbow 45° Codo 45°
LightFit Coupler Enlace LightFit
491104
490504 Elbow 90° Codo 90°
Coupler (PN 25) Enlace Recto (PN 25)
460104/460103
Page 14
Flanged Tee Enlace T Bridado
Long Coupler Enlace Largo
450104
499404
4915Q4
Page 17
Duckfoot Elbow 90° with Outlet Codo 90° Empotrable con Toma de Servicio
Page 13
4947C4 Adjustable Elbow Codo Ajustable
Page 17
Table of Contents / Índice
4947D4
Page 17
Adjustable Elbow One Sided Codo Ajustable Enlace/Espiga
496804
Page 18
Page 18
Page 18
Page 19
Page 19
Page 20
Page 21
Page 22
Page 23
Tapping Valve Toma de Servicio con Válvula
493604
Page 27
4941M4
Page 27
494104
Page 28
4945M4
Page 28
494504
Page 28
Female Transition Elbow 90° Codo de Transición de 90° Tuerca Libre, Hembra
Page 23
PE Ball Valve Válvula de Bola PE
495404/4954S4
Page 27
Male Free Nut Transition Elbow 90° Codo de Transición de 90° Tuerca Libre Macho
Welding Cap for Tapping Saddle Tapón Soldable para toma de Servicio
436207
492604
Female Free Nut Transition Coupler Enlace de Transición Tuerca Libre Hembra
Tapping Saddle Parallel Outlet Toma de Servicio Salida Paralela
498304
Page 26
Male Free Nut Transition Coupler Enlace de Transición, Tuerca Libre Macho
Tapping Saddle Toma de Servicio
4963P4
493504
Female Transition Elbow 45° Codo de Transición de 45° Hembra
Branch Saddle Collarín de Derivación
496304
Page 26
Male Transition Elbow 45° Codo de Transición de 45° Macho
Monolithic Weld End Cap for Ballon Saddle Tapón Monolítico Soldable para Collarín Globo
495804
492504
Female Transition Elbow 90° Codo de Transición de 90° Hembra
Transition Saddle Collarín de Transición
498304
Page 25
Male Transition Elbow 90° Codo de Transición de 90° Macho
Repair Saddle Toma de Reparación
493804
493104 Female Transition Coupler Enlace de Transición Hembra
Saddle BSPP Female Outlet Collarín BSPP Rosca Hembra
495204
Page 25
Male Transition Coupler Enlace de Transición Macho
Balloon Saddle Collarín Globo
4958T
492104
4946M4
Page 29
Male Free Nut Transition Elbow45° Codo de Transición de 45° Tuerca Libre, Macho
Page 24
494604 Female Free Nut Transition Elbow 45° Codo de Transición de 45° Tuerca Libre Hembra
Page 29
Table of Contents / Índice
494404
Page 29
Female Union Free Nut Transition Tee Enlace T PE/Latón Tuerca Libre Hembra
497104
Page 30
Page 30
Page 30
Page 31
Page 31
Page 31
Page 32
Page 32
Page 34
Wastewater Saddle PVC/PP Adaptor Inlet Collarin Lightfit de transicion para Aguas Residuales de PE A PP/PVC
37980
Page 36
37117
Page 37
470604
Page 37
473304
Page 37
473704
Page 37
Wastewater Elbow 15º Codo 15º Para Aguas Residuales
Page 34
Wastewater Saddle 45° Inlet 110 Ramal 45° de Salida para Aguas Residuales
4758V4
Page 36
Wastewater Elbow 30º Codo 30º Para Aguas Residuales
Wastewater Adjustable Saddle Ramal para Aguas Residuales
4758A4
4747V4
Wastewater Elbow 45º Codo 45º Para Aguas Residuales
Flange Backing Ring Brida Revestida
475804
Page 36
Wastewater Spigot Adaptor for Clay Pipe Adaptador Espiga para Tubería Cerámica
Flange Adaptor Adaptador de Brida
09903
4701V4
Wastewater Adaptor for Clay Pip e Adaptador para Tubería Cerámica
Full Face Flange Brida de Cara Plana
490207
Page 35
Wastewater Adjustable Elbow PE to PVC Codo Ajustable de Transición de PE a PVC
PE Cast Iron Spigot Transition Coupler Enlace de Transición Espiga - PE/Hierro Fundido
490209
37020/477207
Waste Water PE to PVC Adaptor Adaptador Para PE A PVC
PE Cast Iron Flange Transition Coupler Enlace de Transición Bridado - PE/Hierro Fundido
495704
Page 35
Wastewater Manhole Adaptor Adaptador para Pozo de Aguas Residuales
PE Male Transition Elbow 45° Codo de Transición PE de 45° Macho
497704
4747D4 Wastewater Adjustable Elbow O ne Sided Codo Ajustable para Aguas Residuales Enlace/ Espiga
PE Male Transition Elbow 90° Codo de Transición PE de 90° Macho
497604
Page 35
Wastewater Saddle Spigot Inlet Collarín Lightfit para aguas residuales con salida espiga
PE Male Transition Coupler Enlace de Transición PE Macho
497504
4758S4
Page 40-51 PLASSON Control Boxes Soldadora Automática de ElectroFusión de Plasson
Page 34
Page 52-55 Installation Tools Herramientas de Instalación
Fittings / Accesorios
Coupler
490104
Enlace Recto
F i t t
A
A
D d
i n
D d
g L1
L1 L
20mm up to 75mm
Size d 16
L
20
71 76
25 32
82 88
40 50
101
97
63 75
117 126
90 110
148
125
162 173
90mm up to 560mm
L1 34
37
40 42 47 49
57 61 73
78 85 90
D
57
34
49
37
44
42 46
39 63 96
56 67 82 98
117 140
157
195 212 223
93
105 109
174 194 218 242
225
240
250 280
251 275
119 123
272 311
134
400
277 293
340 387 431 485
139 137 145
W
39
183
282
A
35 31 36
140 160 180 200
315 355
s
L
51 57
566 859 1075
18
1295 2112
2785 3900 4461 6440 8845 10200 13800
170 184 203
231
200
c
1550
156
256
60 38
97
138
A c
105
116 126
480 440 360
132 72
147 230 340
64 70 81 87
UC
/
23 12 6 4 4 4
e s o
2 1 1 1 1
r i o s
490103
A
D d
L1 L
Size d 450 500 560 630 710 800*
L 306 340
376
418 472
-
L1
D
A
153
539
257
170 188 209
603 674
283
759
317 356
236 -
853
-
W
UC* 5 5 5
400
15800 20200 28000 41100 62000
4 4
-
-
-
* Available 2nd Quarter 2013 * A la venta desde mediados de 2013 Optimal order quantity for packing on two stacked pallets Cantidad óptima para embalaje en dos pallets apilados.
7
Fittings / Accesorios F i t
Long Coupler
4901L4
Enlace Largo
t A
i n
D d
g
L1 L
s
Size d /
32 40 50
63
L
L1
104
176 195 213
D
A
50 87
44
56
43 46
96
68 82
51 57
105
W
UC 272
83
135 215 317
128
96 48
A c c e s o
Coupler (PN 25)
450104
Enlace Recto (PN 25)
r
A
A
i
D d D d
o L1
s
Size d
L
50
100 118
90 110
63 75 125
L1 49
L
D 68 82
148
57 62 73
97 117
163 173
80 85
157
126
160 180 200
198
97
225
240
104 110 118
250 280
256 275
315
8
L1 L
212 223
282
126 134
139
140 198 224 249 280 310 341 388
A 52 57 65 69 79 87 105 114
126
140
155 167 184
W
UC
147 230
132 72
339 566
60 38
835 1075 1780 2449
3295
4366 5520 6440 8845
23 18
6
4 4 4
2 1 1
Fittings / Accesorios
LightFit Coupler (PN10)
460104
Enlace LightFit (PN10)
F i t t
A
i
D d
n g L1 L
Size d
L
L1
D
40 50
90 100 118
43 49
68
63 75
90 110
125
126 148
163 173
140 160 180 200
182 198
225
240
212 232
57 61 72 80 85 89
97
104 114 118
56 77
90 108
131 149
A
W 96
47
52 57 63 69 79
98 98 214 360 540 740 970 1320 1650 2100 2825 3728 4850 6950 7980 11893
87 94 104 114
167 193 215 235
127
264
141
256 275
126 135
293 332
155 166
315 355
284 280
296
374 421 474
184 204
400
140 138 146
250 280
s
227
UC
/
200
132 112 60 44
A
25 20
12 6 5
4 4
2 1 1 1 1
c c e s o r
460103
i o s
A
D d
L1 L
Size d
L
450 500 560 630 710 800
310 340
376 418 472 500
L1
D
A
155
518
255
170 188 209
236 250
576
283
645
317 356
817
400 450
726
913
W 11700 16000 21500 30820 43100 57300
UC* 5 5 5 4 4 4
* Optimal order quantity for packing on two stacked pallets * Cantidad óptima para embalaje en dos pallets apilados.
9
Fittings / Accesorios F i t
Reducing Coupler
491104
Enlace Reductor
t L
i n g
1 A
A
1 A
1 1 D d
1 1 D d
L2 L2
Size dxd1
c e s o r i o
L1
20 x 16 25 x 20 32 x 20 32 x 25 40 x 25 40 x 32 50 x 25 50 x 32 50 x 40 63 x 32 63 x 40 63 x 50 75 x 63 90 x 50 90 x 63 90 x 75 110 x 63 110 x 90 125 x 90 125 x 110 160 x 90 160 x 110 160 x 125 180 x 125
L
A
71 71
39 39
81 81 90 90 100 100 100
43 43 47 47
119 119 119 126
143 143 143
161 161 171 171 193 193 195 212
D
52 52 52 59 59 59 66 78 78 78 84 84 88 88 105 105 105
116
L1 L
125x90mm up to 180x125mm
20x16mm up to 110x90mm
/
c
d
d D
s
A
A
A1
L1
39 39 37 39
35 35 40 40 44 44 49 49 49
38 43 41 45 48 45 49 54
57 57 57 66 71 71 71
59 53 61 67 61
78 78 85 85 94 94 94 103
74 70 80
69
80 89 87
L2
D
35 35 35 35
D1
36 36 45 45
56 56
40 40 41 40 44 40 44 49
57 61 57 72 72 72
92 117 123 135 179 192 223
56
45
56 68 82
-
128 128
96 96
80
65
307 430 460 480
69
82 98 82
54 44 41
639
116 116
32 23
740 1019 1025 1440 1520 1570 2060
141
199 199 199 222
81 85 85
85
45
158 158
78
480 480 360 360 200 160
59 55
37
116 116 116 139 139
49
UC
54 45
44
68 68 68 82 82 82 98
57
W
36 36 32 36 37
116
141 158 158
18 18
12 12 6 6
s
Spigot Reducer
491107
Reductor Espiga
L L1 L2
1 d
10
Size dxd1
L
32 x 25 40 x 32 50 x 32 50 x 40 63 x 32 63 x 40 63 x 50 75 x 40 75 x 50 75 x 63 90 x 50 90 x 63 90 x 75 110 x 63 110 x 75 110 x 90 125 x 90 125 x 110 140 x 90 140 x 110 140 x 125 160 x 110 160 x 125 160 x 140 180 x 125 180 x 140 180 x 160 200 x 140 200 x 160 200 x 180
104
123 131 129 131 132 132
145 145
151 156
160
166 167 169
178 186 188 208
195 199 219
206
211 221
224
225 229 233
241
L1 50
59 59 59 59 59
60
71 71 71 81 80 80 83 83 83 90 90
95 95 95
101 101 101 107 107 107 114
115 116
L2 48
56
60
56
58 58 60 60
59 65 59 65 71 66 72
80 81 84 80 83 89 84 88 94 89
95
d
W 30 47
55
80 105 110
125 167 175 195 258
275
320 455 446 505 805 800 815
935
1000 1145 1210 1240 1422 1600
100
1756
100 106
2002 2160 2330
93
UC 240 240 264 160 144 144 128
96 96 72 56
48 40
36 36
28 24 18
16 16 16
18
16 12
10 10 8
6 6 6
Maximum Pressure: PN 16 (cold water).
Presión Máxima: PN 16 (agua fria).
Sizes and pressure grades not shown in the above table are available upon request.
Los tamaños y presiones no enunciados en la tabla están disponibles a pedido.
Fittings / Accesorios F
Monolithic End Cap
494204
Tapón Monolítico
i t t i n
A
g D
s
d
/
L1 L
Size d
L
L1
D
A
W
UC
32
63
44
46
50
432
40 50
70 82
44 48
63
95
55
55 62
68 81
51 56 62
75 122
A c
256 192 96
181
c e s o r
End Cap
491204
i o
Tapón
s
A
A
d d
L1
L1 L
L
20mm up to 75mm
Size d 20
25 32
40 50
L 103 114
40 42 47 49
121 156
90 110
183 206
125
222 237 261
225
250 280
315
L1 37
63 75
140 160 180 200
90mm up to 315mm
84
92
142
D
D
57 61 73
78 85 90
93
283 289 318 344
105 109
396
134
405
139
119 123
D 31 36 44
56 67 82 98
117 140
157 174 194 218 242
A 34
37
42 46
51 57 64 70 81 87
97 105
116 126
272 311
156
340 387
170 184
138
W 55 50
76 130 204
UC 400 400 300 160 120
327
72
499 820
48 30 20
1259 1702 2346 2990 4159 5260 7260 8795 8795 8795
15 10
6 5 4
2 1 1 1
11
Fittings / Accesorios F i t t
Spigot End Plug
491207
Tapón Espiga L L1
i n g d
s
/
Size d A
20
c
40 50
L
63 75
e
90 110
52 59
s o
140 160 180 200
157 172
r
196 216 257 262
250 280
315
160
132 72 57 36 25
596 797
1149 1600 2089 2800 3920 5300 7200
112
178
225
352
94 149 250 430
60 70 78 82 87 94 101
142
2000 1600 960 560
17 29 52
57
121 131
UC
8 10
43 48
68 81 90 105
125
W
35 36 39
43 46
25 32
c
L1
120 130
162 167
18 14 10 8 4
3 2
i o s
Tee 90º
490404
Enlace T 90° d1 d1
H
H
d
L
D
d
L1
L1 L
20mm up to 75mm
Size dxd1xd 20 x 20 x 20 25 x 25 x 25 32 x 32 x 32 40 x 40 x 40 50 x 50 x 50 63 x 63 x 63 75 x 75 x 75 90 x 90 x 90 110 x 110 x 110 125 x 125 x 125 160 x 160 x 160 180 x 180 x 180 200 x 200 x 200 225 x 225 x 225 250 x 250 x 250
12
90mm up to 250mm
L
L1
D
H
A
W
UC
96
37 39 39
33
60
28 30
60 109
74 90 102
27 26 26 27 23 25 25 25
96 165 257
200 168 144
103 104 120
139 167 196
294
326 382 440 422 451 494 538
43 48 58
63 71 71 86 86 106 114
122 129
44 44
56
68 82
96 113 143
66
119 129 137
160
165
177
208 245
206 250
24
265
24
290
26 152
261 293 326
315
25
417 638 1090
1955 2950 4700 7200 8650 11860 16250
96 56 32 26 15 8 4
3 2 1 1 1
D
Fittings / Accesorios F
Two Outlets Reducing Tee
492404
i t
Enlace te Reductor con Salida Doble
L2
t d1
i n H
g d
D
s
L1
/
L
Size dxd1 - d1xd
L
L1
L2
D
H
A
W
UC
A
40 x 25 - 25 x 40 40 x 32 - 32 x 40 50 x 25 - 25 x 50 50 x 32 - 32 x 50 50 x 40 - 40 x 50 63 x 25 - 25 x 63 63 x 32 - 32 x 63 63 x 40 - 40 x 63
176 176 195 195 195 213 213 213
46 46 49 49 49 58 58 58
57 57 65 65 65 65 65 65
56 56
40 40 50 50 50
46 46
228
96 75 56
c
58
c
68 68 68 82 82 82
63 63 63
233
51 51 51 57 57 57
342
336 352
52
457 464 480
42 40
e
36
s o
Reducing Tee
491404
Enlace T Reductor
r i o
d1
d1
s H
H
d
D
d D
L
L1
L
20mm up to 75mm
90mm up to 250mm
Size dxd1xd
L
L1
D
25 x 20 x 25 25 x 32 x 25* 32 x 20 x 32 32 x 25 x 32 40 x 20 x 40 40 x 25 x 40 40 x 32 x 40 50 x 20 x 50 50 x 25 x 50 50 x 32 x 50 50 x 40 x 50 63 x 20 x 63 63 x 32 x 63 63 x 40 x 63 63 x 50 x 63 75 x 63 x 75 90 x 63 x 90 110 x 63 x 110 110 x 90 x 110 125 x 90 x 125 125 x 110 x 125 160 x 90 x 160 160 x 110 x 160 160 x 125 x 160 180 x 90 x 180 180 x 110 x 180 180 x 125 x 180 180 x 140 x 180 180 x 160 x 180 200 x 90 x 200 200 x 110 x 200 225 x 90 x 225 225 x 110 x 225 250 x 90 x 250 250 x 110 x 250
104 104 104 104 120 120 120
39 39 39 39
44 44 44 44
43 43 43 48 48 48 48 49 58 58 58
56 56 56
* This size enlarges
139 139 139 139 167 167 167 167 196
L1
63
68 68 68 68 82 82 82 82
H
A
W
UC
66
43 43 43 43 47 47 47
108
168 168 144 144
74
66 66 72 72 75 78 78 86 90 85
93 104 109
294
68
96 113
326 326
71 71
143 143
124 134 147
382 382 440 440 440 422 422 422 422 422 451 451 494 494 538 538
86 86 86 86 86 106 106 106 106 106 114 114
165 165
161 173
208 208 208 245 245 245 245 245
180
122 122 129 129
261 261 293 293 326 326
* Esta media agranda
122
193
198 200
219 225 237 250 205 210 220
225 235 240
52 52 52 52
58 58 58 58
62 71
81 81 88 88 106 106 106
116 116 116 116 116 125 125 140 140
152 152
116
89
91 151
150
152 224
225
228
237 348
353 365 381 607 1050
1715 1815 2805 2859 4450 4450 4470 6090 6270 6410 6610 6950 7140
7235 9900 10000 13350 13400
96 96 96 64 64 64 64 40
32 32 32 26 15 9 8
5 5 3 3 3 2 2 2 2 1 2 2 1 1 1 1
13
Fittings / Accesorios F i t
D1 DP d1 DN
Flanged Tee
499404
Enlace T Bridado
t
S
t H
i d
n g
L1
L
s
/
A c c e
Size d x DN x d 90 x 80 x 90 110 x 80 x 110 110 x 100 x 110 125 x 80 x 125 125 x 100 x 125 160 x 80 x 160 160 x 100 x 160 180 x 80 x 180 180 x 100 x 180 200 x 80 x 200 200 x 100 x 200 225 x 80 x 225 225 x 100 x 225 250 x 80 x 250 250 x 100 x 250
L
L1 71 71 71
294
326 326
382 382 440 440 422 422 451 451 494 494 538 538
s
Elbow 90º
o
Codo 90°
86 86 86 86 106 106 114 114
122 122 129 129
D
H
113
165
143 143
A 71
181 181 190 190 210 210
165 165
208 208 245 245
81 81 88 88 106 106
225 225
261 261 293 293 326 326
116 116 125 125
240 245
255
140 140
260 270
152 152
275
D
D1
t
s
d1
DP
W
UC
200 200 220 200 220 200 220 200 220 200 220 200 220 200 220
20 20
8 x 18 8 x 18 8 x 18 8 x 18 8 x 18 8 x 18 8 x 18 8 x 18 8 x 18 8 x 18 8 x 18 8 x 18 8 x 18 8 x 18 8 x 18
138 138 158 138 158 138 158 138 158 138 158 138 158 138 158
160 160 180 160 180 160 180 160 180 160 180 160 180 160 180
2835 3560 4240 4550 5180 6245 6785 7745 8550 8510 9230 11240 11900 14750 15400
8
22
20
22
20
22
20
22
20
22
20
22
20
22
6 6
4
3 3 3 2 1 1 1 1 1 1 1
490504 L L
r 1 L
1 L
i o
d
20mm up to 75mm
s
Size d
L
20
66 66
40 50
92
25 32
83
108
63 75
131
125
140 160 180 200
243
79
A 38 38 43 47
44
55
52 59 62 69 79
68 81
78
97 113
271
100
165
323
87 105
412 449 498 550
250
D 36 36
40 44 48
57 69
309
225
L1 35 37
158
213
90 110
d
90mm up to 250mm
D
143
93
89 94 106
183 209 244
112 121
115
262 295 327
130
124 140
152
D
W
UC
65 52
320 320
192
84
137 211 319 527
120
72
40
33 16 9 6
875
1519
2424 3024 3990 7590 8670 9900 13500
4
3 2 1 1 1
Elbow 45º
490604
Codo 45°
L L
1 L
1 L
d D
d
32mm up to 75mm
Size d 32
40 50
63 75
90 110
125 140 160 180 200
225
14
250
L 95
108
125
148 180 243
272
304 342 350 434 472 520
571
90mm up to 250mm
D
L1 39
42 49
57 71 75
78 86
92 95
105
112
120
129
D 45
55
68 81
96 112
143
165
182 209 244
A 43 46
51 59 62 69 78 88
95
105 114
261
125
326
151
294
140
W
UC
75 117
240 160
181 264 426
759 1269
2030 2471 3990 6150 7050 9800 13400
96
60 40
22 12 8
5
4
2 1 1 1
Fittings / Accesorios F
Elbow 22.5º
490804
Codo 22.5°
i t
L
t 1 L
i n
d D
Size d
L
L1
D
A
W
UC
90 110
214
72 71
113
71
665
22
143
274 302
86 86 105
165
81 88 106
1087 1850 2930 5360
14 8 4
125 160 180
232
391
209 244
115
2
g s
/
A
LightFit Elbow 45º
46060
Codo LightFit 45°
c c e
D d
s L1
o
L
Size d
L
L1
D
A
160
323
98
193
106
W 1976
UC
r
-
i o s
LightFit Elbow 30º
46330
Codo LightFit 30° D
d
L1 L
Size d
L
L1
D
A
160
300
98
193
106
W 1798
LightFit Elbow 15º
UC -
46370
Codo LightFit 15°
D
d
L1 L
Size d
L
L1
D
A
160
265
98
193
106
W 1728
UC -
15
Fittings / Accesorios F i t
Elbow 180º
490904
Codo 180°
t
B
L
d
i n
1 L
g H
s
/
A
Size d
L
L1
D
c
25 32
38 44
38 44
40
53
38 41 48
A
W
UC
32
163 216 323
216
41 48
53
144 80
c e s
Y Reducer
o
Y Reductor
491904
r
L
i
B
A
d1
o
1 L
s H
d
Size d x d1 x d1 32 x 25 x 25 40 x 32 x 32 50 x 40 x 40
L
L1
B
A
H
W
36
40 43 46
70 88 109
38 42 46
119 133 151
97 151
200 120
242
72
45
56
Duckfoot Elbow 90º
UC
491504
Codo 90° Empotrable
H D
d
L1 1 A
L
16
Size d
L
L1
D
A
A1
H
W
UC
90
261
69
112
71
115
151
2260
5
Fittings / Accesorios F
Duckfoot Elbow 90º With Outlet
4915Q4
Codo 90° Emportable con toma de servicio
i t t i n
D
g
H
d 1
d
s L1 1 A
/
L
Size d x d1
L
L1
D
A
A1
H
W
UC
90 x 32
261
69
112
71
115
146
2265
5
A c c
Adjustable Elbow
4947C4
e s
Codo Ajustable
o r
A D
d
i M 2 A 4 X º .
o s
L 1
L (max, when straight)
Size d
L
110
362
125
L1 80 85
382 456
160 180 200
D 140
92
511 512
A
104 104
83
157
95
200 224 250
114 128
125
W
UC
2030 2630 4510 7490
8 8
3 2 -
9733
Adjustable Elbow One Sided
4947D4
Codo Ajustable Enlace/Espiga A
M 1 A 2 X º .
d
D
1 D
L 1
L2 L (max, when straight)
Size d x D1 110 x 110 125 x 125 160 x 160 180 x 180 200 x 200
L
L1
L2
D
276 292 335 365
85 90 100 138 104
85 90 100 138
140
370
116
A
W
UC
83
12 12
157
95
200
223
114 128
1270 1740 3150 4210
250
125
6172
4
3 -
17
Fittings / Accesorios F i t
G
Balloon Saddle
496804
D
Collarín Globo
H
1 H
t i
ø d
n g s
/
A
L
Size d x G 90 x 2.1/2" 110 x 2.1/2" 125 x 2.1/2" 140 x 2.1/2" 160 x 2.1/2" 180 x 2.1/2" 200 x 2.1/2" 225 x 2.1/2" 250 x 2.1/2"
B
B
H
H1
D
L
W
UC
139
105 105 105 105 105 105 105 105 105
70 70 70 70 70 70 70 70 70
90 90 90 90 90 90 90 90 90
176 176 176 176 176 176 176 176 176
1961 1973
10 10 10 10 10 10 10 10 10
160
169
174
176
182 202
227 252
1981 2000 1984
1997 1991
2003 2010
c c e s o r
Saddle BSPP Female Outlet
4958T G
Collarín BSPP Rosca Hembra
H
i d
o s L
Size d x G 63 x 1" 63 x 1.1/4" 63 x 1.1/2"
B
H
L
100 100 100
30 30 30
118 118 118
B
W
UC
390 400 400
60 60 60
Repair Saddle
495204
Toma de Reparación
H
d
B
L
Size d
B
H
L
W
UC
63 75
117
103
124 145
378 410 504
140 160 180
178
118 118 118 118 118 118 118 118
72 56
90 110
29 29 29 29 29 29 29 29
125
18
162
199 219
40
555
32
620 660 718
24 24 24
759
16
Fittings / Accesorios F
Transition Saddle
493804 Rp
Collarín de Transición
i t
H
t i n
d
g L
63mm up to 180mm Outlets 1¼" and 1½"
Size d x Rp 63 x 1.1/4" 75 x 1.1/4" 90 x 1.1/2" 90 x 2" 110 x 1.1/2" 110 x 2" 125 x 1.1/2" 125 x 2" 140 x 1.1/2" 140 x 2" 160 x 1.1/2" 160 x 2" 180 x 1.1/2" 180 x 2" 200 x 2" 225 x 2" 250 x 2"
90mm up to 250mm Outlet 2"
B
H
L
100
53 53 53 76 53 76 53 76 53 76 53 76 53 76 76 76 76
118 118 118
117 126
142 142 158 158
166 175
174
196 176 216 182 202
227 252
W
UC
612
48 40
176
605 930 1493 1000 1500 1049 1510 1072 1520
118
1163
176
1540 1200 1500
176 118
176 118
176
118
118
176 176 176 176
s
B
/
A
16
14
12 12 12 12
1575
1570 1546
c c
10 10 8 8
e
6
s
10 10 10 10
o r
NEW!
i Rp
o H
s
d
L
Size d x Rp 280-400 x 2" 450-710 x 2"
B
H
L
300 300
77 77
306 314
B
W
UC
1975 -
-
8
* See dedicated tools on page 55
Monolithic Weld End Cap for Balloon Saddle
498304
Tapón Monolítico Soldable para collarín globo A
D d
L1 L
Size d
L
L1
D
A
W
UC
90
123
77
117
77
479
55
19
Fittings / Accesorios F i t
Branch Saddle
495804
Collarín de Derivación
t
d1
i 1 H H
n g s
d
/ L
A c c e s o r i o s
63mm up to 180mm Outlets 32mm to 63mm
200mm up to 315mm and all sizes with Outlet 90mm
Size d x d1
B
H
H1
L
63 x 32 63 x 40 63 x 50 63 x 63 75 x 32 75 x 40 75 x 50 75 x 63 90 x 32 90 x 40 90 x 50 90 x 63 90 x 90 110 x 32 110 x 40 110 x 50 110 x 63 110 x 90 125 x 32 125 x 40 125 x 50 125 x 63 125 x 90 140 x 32 140 x 40 140 x 50 140 x 63 140 x 90 160 x 32 160 x 40 160 x 50 160 x 63 160 x 90 180 x 32 180 x 40 180 x 50 180 x 63 180 x 90 200 x 63 200 x 90 225 x 63 225 x 90 250 x 63 250 x 90
100 100 100 100
59
49
118 118 118 118 118 118 118 118 118 118 118 118
78
66
94
82 85 49
93
117 117 117 117 126 126 126 126 139
59
66
78
93
82 85 49 68 82 85 90 49 68 82 85 90 49 68 82 85 90 49 68 82 85 90 49 68 82 85 90 49 68 82 85 90 85 90 85 90 85 90
94
59
78
93
94 105
59
148 148 148 148
78
93
94 105
162 162 162 162 162 169
59
78
93
94 105
59
180 180 180 180 174 200 200 200 200
78
93
94 105
59
78
93
94 105
176 219 219 219 219
59
78
93
94 105 102 105 102 105 102 105
182 202 202
227 227 252 252
B
Max Cutting Dia
W
23.0 29.5 37.5 45.0 23.0 29.5 37.5 45.0 23.0 29.5 37.5 45.0 66.0 23.0 29.5 37.5 45.0 68.0 23.0 29.5 37.5 45.0 68.0 23.0 29.5 37.5 45.0 68.0 23.0 29.5 37.5 45.0 68.0 23.0 29.5 37.5 45.0 68.0 47.0 68.0 47.0 68.0 47.0 68.0
176
118 118 118 118
176
118 118 118 118
176
118 118 118 118
176
118 118 118 118
176
118 118 118 118
176 176 176 176 176 176 176
UC 56
394 400 430 462 438 451 465
40 40 40 48
36 32 32 32 32 32
522 519 529
550 608 934 585 598
24
15
24 24 20 20 18 24 20 20
629
658 948 620
613
690
721 953
16
18 24
689 664
16 16 16 16 16 16 16 16 16 16 12 12 12 15 15 15 15 15 15 15
721 736 965
708
722
787 825
956
800 800 828 886
976
862 900 930 983 970 990 d1
NEW! 1 H
H
d
L
20
B
Size d x d1
B
H
H1
L
W
280-400 X 90 280-400 X 110 280-400 X 125 280-400 X 160 450-710 X 90 450-710 X 110 450-710 X 125 450-710 X 160
300 300 300 300 300 300 300 300
117
102 105 110
306 306 306 306 314 314 314 314
1440 1540 1680 1950 1440 1540 1680 1950
* See dedicated tools on page 55
120
125 136 117
120
125 136
121
102 105 110
121
UC 7 7 6 6 7 7 7 6
Fittings / Accesorios F
Tapping Saddle
496304
i t
Toma de Servisio
t H
i n 2 H
g
1 H 1 d
s
ø d
/
A
40mm up to 63mm
L
75mm up to 180mm 200mm up to 250mm
Type
Size d x d1
H
B
H1
H2
L
mb mb mb mb mb mb mb mb
40 x 20 40 x 32 50 x 20 50 x 25 50 x 32 63 x 20 63 x 25 63 x 32 63 x 40 63 x 50 63 x 63 75 x 20 75 x 32 75 x 40 75 x 50 75 x 63 90 x 20 90 x 25 90 x 32 90 x 40 90 x 50 90 x 63 110 x 20 110 x 32 110 x 40 110 x 50 110 x 63 125 x 20 125 x 32 125 x 40 125 x 50 125 x 63 140 x 32 140 x 40 140 x 50 140 x 63 160 x 20 160 x 32 160 x 40 160 x 50 160 x 63 180 x 20 180 x 32 180 x 40 180 x 50 180 x 63 200 x 20 200 x 32 200 x 40 200 x 50 200 x 63 225 x 20 225 x 32 225 x 40 225 x 50 225 x 63 250 x 20 250 x 32 250 x 40 250 x 50 250 x 63
107
66 66 76 76 76
7 11 7
100 100 100 100 100 100
10
94 94 98 98 98 90 90 90
100 100 100 100 100 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118
mb mb mb mb mb mb mb mb mb mb
mb mb mb mb mb mb mb mb mb
Please note: mb = Mono Block
121
110
91 122 90
93 99
142
123 175 125 132
142
123 175 117
108
126 134
123 175 119 127
138
123 175 116 131 141
123 175 132 142
123 175
118 144
157 175 197 125 144
155 174
197 125 132
142
123 175 125 132 142
123 175 125 132 142
123 175
117 117 117 117 117 126 126 126 126 126 126 148 148 148 148 148
162 162 162 162 162
180 180 180 180
199 199 199 199 199 219 219 219 219 219 202 202 202 202 202
227 227 227 227 227 252 252 252 252 252
10
12 12 12
60 64 64
177 177 177 177 177 177 177 177
16 16 16 21
114 114 114 114
60 64 64 50
56
64 64
177 177
16 16 21
114 114 114
64 64
177 177
16 16 21
114 114 114
64 64
177 177 177 177 177 177
56 60 64 64
21 16 21 24 20 50 18
21 24 20 50
56 60 64 64 50
56
60 64 64 50
56
60 64 64
138 138 138 138 138
177
138 138 138 138
177 177 177 177 177 177 177 177 177 177 177 177 177 177 177
176 176 176 176 176 176 176 176 176 176 176 176 176 176 176
B
Welding Cup Type Type C Type C Type C Type C Type C Type C Type C Type C Type A Type A Type A Type A Type A Type A Type A Type A Type B Type B Type B Type B Type A Type A Type B Type B Type B Type A Type A Type B Type B Type B Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A
c
W 290 370 390 390 410
355 363 380 1080 1099 1183 1120 1091 1124
1139
1228 900 1120 1120 1130 1220 1300 964 970 1000 1300 1383 1220 1230 1280 1345 1420 1330 1360 1382 1468 1360 1320 1439
1375
1390 1550
1565 1580
1595
1605 1425 1445 1471 1496
1579
1370 1450 1485 1506 1589 1380 1464 1582 1589
1595
UC 52 52 52 50 45 40 40 40
16 16 16 16 16 16 16 16 20 20 20 20 14 14 20 20 20
c e s o r i o s
12 12 15 15 15 12 12 12 12 12 12 10 10 10 10 10 10 10 10 10 10 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8
Nota: mb = monobloque
21
Fittings / Accesorios F i t
Tapping Saddle parallel outlet
4963P4
Toma de Servisio salida paralela H
t i n
2 H
g
1 d 1 H
s d
/
L
B
A c c e s o r i o s
22
Size d x d1 63 x 20 63 x 32 63 x 40 63 x 50 63 x 63 75 x 20 75 x 32 75 x 40 75 x 50 75 x 63 90 x 20 90 x 32 90 x 40 90 x 50 90 x 63 110 x 20 110 x 32 110 x 40 110 x 50 110 x 63 125 x 20 125 x 32 125 x 40 125 x 50 125 x 63 140 x 32 140 x 40 140 x 50 140 x 63 160 x 20 160 x 32 160 x 40 160 x 50 160 x 63 180 x 20 180 x 32 180 x 40 180 x 50 180 x 63 200 x 20 200 x 32 200 x 40 200 x 50 200 x 63 225 x 20 225 x 32 225 x 40 225 x 50 225 x 63 250 x 20 250 x 32 250 x 40 250 x 50 250 x 63
H
B
H1
H2
L
115 127
100 100 100 100 100
65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65
177 177 177 177 177 177 177 177 177 177 177 177 177 177 177 177 177 177 177 177 177 177 177 177 177 177 177 177 177 177 177 177 177 177 177 177 177 177 177 177 177 177 177 177 177 177 177 177 177 177 177 177 177 177
118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118
148 141 178
115 127
148 141 178
115 127 148 141 178
115 127 148 141 178
115 127
117 117 117 117 117 126 126 126 126 126
148 148 148 148 148
148 141 178
162 162 162 162 162
148 141 178
180 180 180 180
127
115 127
148 141 178
199 199 199 199 199 219 219 219 219 219
148 141 178
202 202 202 202 202
148 141 178
115 127
115 127
115 127
148 141 178
115 127
148 141 178
227 227 227 227 227 252 252 252 252 252
176 176 176 176 176 176 176 176 176 176 176 176 176 176 176
Welding Cup Type Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A Type A
W
UC
1035 1042 1070 1094 1180 1120 1130
16 16 16 16 16 16 16 16 16 16
1119
1140
1226 1170 1120 1130
1235
1270 1240
1175 1179 1293 1380
1275
1298 1320
1335 1426 1330 1360 1370 1468 1390 1304
1327
1348
1399
1550 1304 1490
1515
1304 1360 1451 1405 1425 1510 1370 1450 1485 1506 1586 1380
1569
1582 1589
1595
14 14 14 14 14
12 12 12 12 12 10 10 10 10 10 10 10 10 10 10 10 10 10 10 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8
Fittings / Accesorios F
Welding Cap for Tapping Saddle
498304
Tapón Soldable para toma de servicio
i t t
H
i n
A
g s
D
/
L1 L
A
Type
Size
D
A
H
L
L1
W
UC
Type A Type B Type C
57
74
59
74
63 66 55
36
153
128
30
110
26
69
62 51
50 40
73 63
54 49
192 256
c c e
Please use Welding Cap Type as specied on page 21.
s
Utilizar el ipo de tapón soldable como se indica en la página 21.
o r i o s
PE Ball Valve
436207
Válvula de Bola PE E1 h
L1 H s
E
p d
d
1 H
B L
Size d 25* 32* 40 50* 63*
75
90* 110*
125 160
dp
s
19
3
24 24
3.4 4.1
39
6 6
48 48 70 86 86 86
8 8.2 10
12 16
L
L1
B
E
E1
H
H1
h
300 300 300 414 414 414 550 550 550 550
103 103 103 130 130 130
65 65 65
80 80 80 120 120 120 200 200 200 200
70 70 70 85 85 85 85 85 85 85
94 94 94 160 160 160 200 200 200 200
50 50 50 80 80 80 110 110 110 110
40 40 40 40 40 40 40 40 40 40
176
178 182 182
87 87 87
93 93 93 93
W Units grams per carton 700 700 800 2950 2600 2300 6700 6700 6100 7000
4 4 4 4 4 4
1 1 1 1
* Full Bore Dimensions * Dimensiones de cavidad única
23
Fittings / Accesorios F i t
Tapping Valve
495404/4954S4*
Toma de Servisio con Válvula
t
H
i n g 2 H
s 1 d 1 H
/
d
A c B
L
c
63mm up to 180mm
200mm up to 250mm
e s o r i o s
Size d x d1
B
63 x 32 63 x 40 63 x 50 63 x 63 75 x 32 75 x 40 75 x 50 75 x 63 90 x 32 90 x 40 90 x 50 90 x 63 110 x 32 110 x 40 110 x 50 110 x 63 125 x 32 125 x 40 125 x 50 125 x 63 140 x 32 140 x 40 140 x 50 140 x 63 160 x 32 160 x 40 160 x 50 160 x 63 180 x 32 180 x 40 180 x 50 180 x 63 200 x 32 200 x 40 200 x 50 200 x 63 225 x 32 225 x 40 225 x 50 225 x 63 250 x 32 250 x 40 250 x 50 250 x 63
99 99 99 99 117 117 117 117 126 126 126 126 148 148 148 148
162 162 162 162 180 180 180 180 202 202 202 202 220 220 220 220 202 202 202 202
227 227 227 227 252 252 252 252
H
H1
H2
L
W
UC
40 40 45 45 40 40 45 45 46 46
238 238 238 238 238 238 238 238 244 244 244 244 244 244 244 244 244 244 244 244 244 244 244 244 244 244 244 244 244 244 244 244 244 244 244 244 244 244 244 244 244 244 244 244
118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118 118
2090 2103 2140 2205 2100 2089 2089 2089 2150
8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8
126 137 152 186
126 137 152
186
126 137 152
186
126 137 152 186
126 137 152 186
126 137 152 186
126 137 152 186
126 137 152
186
126 137 152 186
126 137 152 186
126 137 152
186
51 51 46 46
51 51 46 46
51 51 46 46
51 51
46 46
51 51 46 46
51 51 46 46
51 51 46 46
51 51 46 46
51 51
* Tapping Valve with serrated edge knife. Available in all sizes. * Toma de servicio con bordes "dientes de sierra". Todos los tamaños.
24
176 176 176 176 176 176 176 176 176 176 176 176
2163
2200
2265 2266 2250
2279
2345
2276
2289
2326 2391 2285 2298
2335
2441
2377 2390 2427 2492 2440 2453 2490 2550 2431 2444 2481 2546 2448 2501 2538 2603 2504
2517
2554
2619
5 5 5 5 5 5 5 5 5 5 5
Fittings / Accesorios F
Male Transition Coupler
492104
Enlace de Transición Macho
i t t i n
A
D
R
g
d
s L2
L1 L
/
Size d x R
L
L1
L2
D
A
W
UC
20 x 1/2" 25 x 3/4" 32 x 1/2" 32 x 3/4" 32 x 1" 32 x 1.1/4" 32 x 1.1/2" 40 x 1" 40 x 1.1/4" 40 x 1.1/2" 40 x 2" 50 x 1" 50 x 1.1/4" 50 x 1.1/2" 50 x 2" 63 x 1.1/4" 63 x 1.1/2" 63 x 2" 75 x 2" 75 x 2.1/2"
105
37
29 29 29 29
14
34
129
200 150 100 100 100 60 60
111 117 117 122
124 124
131 133 133 138
135 137 137
142
153 153 158
167 172
40 42 42 42 42 42 47 47 47 47 49 49 49 49
57 57 57 61 61
34
36 36
34
36 36 41 34
36 36
41
36 36 41 41 46
19 23 23 23 23 23 29 29 29 29
37
38 38 38 38 48 48 48
51 51 51 51 57 57 57
921
64 64
1305 1500
150 241
42 42 42 42 42 46 46 46 46
59 59
263 285
393
404 409 470 483 500
72 54 54
36
513 569
48 48 48 30 30 30 30
547 748 884 845
16 16
A c c e s o r i o s
Female Transition Coupler
493104
Enlace de Transición Hembra A
p R
d
D
L2
L1 L
Size d x Rp 20 x 1/2" 25 x 3/4" 32 x 3/4" 32 x 1" 32 x 1.1/2" 40 x 1" 40 x 1.1/4" 40 x 1.1/2" 50 x 1.1/2" 50 x 2" 63 x 1.1/2" 63 x 2"
L
L1
L2
96
37
20
105
113 113 113 122 122 122 126 131
40 42 42 42 47 47 47 49 49
147 147
57 57
23 25 25 25 25 25 25 25
30 30 30
D
A
W
UC
14
35
130 145
200 150 100 100 100 54 54 54 48 40 24 30
19 23 23 23 29 29 29
38 38 48 48
38 42 42 42 46 46 46
51 51 57 57
316 265
410 507 407 419 491 685
975 879
25
Fittings / Accesorios F i t
Male Transition Elbow 90º
492504
Codo de Transición de 90º Macho
t d
i 1 L
n g R
s
D
L2
/
A c c e s o r i o
L
Size d x R
L
L1
L2
20 x 1/2" 25 x 3/4" 32 x 1/2" 32 x 3/4" 32 x 1" 32 x 1.1/4" 32 x 1.1/2" 40 x 1" 40 x 1.1/4" 40 x 1.1/2" 40 x 2" 50 x 1" 50 x 1.1/4" 50 x 1.1/2" 50 x 2" 63 x 1.1/4" 63 x 1.1/2" 63 x 2" 75 x 2" 75 x 2.1/2"
95 95 112 112 117 119 119 126
35 37
29 29 29 29
128 128
133
142 144 144 149
167 167 172 199
204
40 40 40 40 40 44 44 44 44 48 48 48 48
57 57 57 69 69
34
36 36 34
36 36
41 34
36 36 41
36 36
41 41 46
D
A
14
38 38 43 43 43 43 43 47 47 47 47
19 23 23 23 23 23 29 29 29 29
59 59
UC
153
624
400 120 84 84 84 60 60 48 48 48 40 42
679 655
36 36
806 985 1040
1125
30 24 24 24
1450 1649
16 16
168
259 262 300 419 436 458 500 510
725
52 52 52 52 59 59 59 62 62
38 38 38 38 48 48 48
W
s
Female Transition Elbow 90º
493504
Codo de Transición de 90º Hembra d
1 L
p R
D
L2 L
Size d x Rp 20 x 1/2" 25 x 3/4" 32 x 3/4" 32 x 1" 32 x 1.1/2" 40 x 1" 40 x 1.1/4" 40 x 1.1/2" 50 x 1.1/2" 50 x 2" 63 x 1.1/2" 63 x 2"
26
L
L1
86 89 108 108 108
35 37
117 117 117 133
138
161 161
40 40 40 44 44 44 48 48
57 57
L2 20
23 25 25 25 25 25 25 25
30 30 30
D
A
W
UC
19 23 23 23 29 29 29
14
38 38 43 43 43 47 47 47
142 160 280 280 360
400 120
38 38 48 48
52 52 59 59
535
432 453 560 744 1072
959
96 48
96 36 48 48 40 24 24 24
Fittings / Accesorios F
Male Transition Elbow 45º
492604
Codo de Transición de 45º Macho
i t
d
t i R
n
1 L
D
g
L2 L
s
Size d x R
L
L1
L2
D
A
W
UC
32 x 1/2" 32 x 3/4" 32 x 1" 32 x 1.1/4" 32 x 1.1/2" 40 x 1" 40 x 1.1/4" 40 x 1.1/2" 40 x 1.1/4" 40 x 2" 50 x 1" 50 x 1.1/4" 50 x 1.1/2" 63 x 1.1/4" 63 x 1.1/2" 63 x 2" 75 x 2" 75 x 2.1/2"
124
39 39 39 39 39
29 29
84 84
375
72
34
43 43 43 43 43 47 47 47 47 47
249 250
44 44 44 44 44 49 49 49
23 23 23 23 23 29 29 29 29
479 488 433 485 510 685 564 610 600 778
48 48 60 60 48 40 48 48 48 30 24 24 24
123 129
130 130 142 144 144 150 149
161 161 166
34
36 36 36 36
41 34 41
57 57 57 71 71
184 184 189
221 226
38 38 38 38 48 48 48
36 36 36 36
41 41 46
51 51 51 59 59 59 62 62
59 59
927
860
953 1399
/
A c c e s
16 16
1600
o r
Female Transition Elbow 45º
493604
i o
Codo de Transición de 45º Hembra
d
s
p R
1 L
D
L2 L
Size d x Rp 32 x 1" 32 x 1.1/2" 40 x 1" 40 x 1.1/4" 40 x 1.1/2" 50 x 1.1/2" 50 x 2" 63 x 1.1/2" 63 x 2"
L
L1
L2
D
A
W
UC
120 120
39 39
25 25 25 25 25 25
23 23 29 29 29
43 43 47 47 47
342 488 510 419 479
96 96
38 38 48 48
51 51 59 59
532
133 133 133
155
44 44 44 49 49
178 178
57 57
150
30 30 30
48 48 48 48 48 24 24
714 1019
912
Male Free Nut Transition Coupler
4941M4
Enlace de Transición, Tuerca Libre, Macho A 1 G R D
D
L3
d
L1 L2 L
Size d x R 32 x 1" 40 x 1.1/4" 50 x 1.1/2" 63 x 1.1/2" 63 x 2"
G
L
L1
L2
L3
D
D1
A
W
UC
1.1/4" 1.1/2" 2" 2" 2.1/2"
159 173
42 47 49
124
34 38 41 41 49
23 29
24 30 38 38 48
42 45 50
555 779 1191
40 30 20
182 201 210
57 57
136
142
162 167
38 38 48
57 57
1440
1929
16
10
27
Fittings / Accesorios F i t
Female Free Nut Transition Coupler
494104
Enlace de Transición, Tuerca Libre, Hembra
t i A
n D
G
d
g s
L2
L1 L
/
A c c
Size d x G 20 x 3/4" 25 x 3/4" 25 x 1" 32 x 1" 32 x 1.1/4" 40 x 1.1/2" 50 x 2" 63 x 2" 63 x 2.1/2"
L
L1
L2
D
A
W
UC
106
37
30 30
14 14
34
124 124
161 166
57 57
150 150 200 260 310 444 709 770 1154
200 140 140 78
141
40 40 42 42 47 49
112 115 135
33 36 36
37 37
19 19 23 29
38 41 44 49
42 42 45
52 57 57
38 38 48
52 32 32 28 20
e s o r
Male Free Nut Transition Elbow 90º
4945M4
Codo de Transición de 90º Tuerca Libre, Macho d
i
1 L
o 1 G R D
s
D
L3 L2 L
Size d x R
G
L
L1
L2
L3
D
D1
A
W
UC
32 x 1" 40 x 1.1/4" 50 x 1.1/2" 63 x 1.1/2" 63 x 2"
1.1/4" 1.1/2" 2" 2" 2.1/2"
150 170 190
40 44 48
115 133
36
23 29
24 30 38 38 48
43 47
574 810
40 30 20
216
224
57 57
40 41 44 49
150
176
181
38 41 48
52 59 59
1256 1635
16 12
2000
Female Free Nut Transition Elbow 90º
494504
Codo de Transición de 90º Tuerca Libre, Hembra d
1 L
G
D
L2 L
Size d x G 20 x 3/4" 25 x 3/4" 25 x 1" 32 x 1" 32 x 1.1/4" 40 x 1.1/2" 50 x 2" 63 x 2" 63 x 2.1/2"
28
L
L1
L2
D
A
W
UC
96 96 99 119 119 132
35 37 37
30 30
14 14
33 36 36
19 19 23 29
38 38 38 43 43 47
164 164 164 164 324 490
779
140 140 105 70 70 48 30
1024 1245
18
149
175
180
40 40 44 48
57 57
40 41 44 49
38 41 48
52 59 59
16
Fittings / Accesorios F
Male Free Nut Transition Elbow 45º
4946M4
i t
Codo de Transición de 45º Tuerca Libre, Macho
t d
i n
1 G R D
1 L
D
g L3
s
L2 L
Size d x R 32 x 1" 40 x 1.1/4" 50 x 1.1/2" 63 x 1.1/2" 63 x 2"
G
L
L1
1.1/4" 2.1/2" 2" 2" 2.1/2"
164 189 206
231 240
L2
L3
D
D1
A
W
UC
/
39
129
44 49
147
34 44 41 58 49
23 29
24 30 38 38 48
47 47
645 790
51 59 59
1232
40 30 20
1489 1945
16 12
A
57 57
165 193 198
38 41 48
c c
Female Free Nut Transition Elbow 45º
494604
e s
Codo de Transición de 45º Tuerca Libre, Hembra
o r
d
i G
o
1 L
D
s L2 L
Size d x G
L
L1
L2
D
A
W
UC
32 x 1" 32 x 1.1/4" 40 x 1.1/2" 50 x 2" 63 x 2" 63 x 2.1/2"
131 129
39 39
36
44 49
43 47 47
189
57 57
164 400 469 740 950 1184
70
146
19 23 29
166 197
34 38 41 41 44
38 38 48
51 59 59
56
48 30 18 18
Female Union Free Nut Transition Tee
494404
Enlace T, PE/Latón, Tuerca Libre, Hembra G
H
d D
L1 L
Size d x G
L
L1
D
H
A
W
UC
32 x 1"
104
39
44
88
43
320
50
29
Fittings / Accesorios F i t
PE Male Transition Coupler
497104
Enlace de Transición PE Macho
t
A
i
D
R
d
n L1
g
L
s
/
A c
Size d x R
D
L
L1
W
20 x 1/2" 25 x 3/4" 32 x 1" 40 x 1" 40 x 1.1/4" 40 x 1.1/2" 50 x 1.1/2" 63 x 1.1/2" 63 x 2"
14 18 24 30 30 30 38 48 48
97 113 123
21 31 35 37
129 61 92
40 40 40 44 48
152 159
200 200 200 144 144 144
238
96
371
40 40
134
137 137
141
161 165
UC
146
450
c e s
PE Male Transition Elbow 90º
o
Codo de Transición PE de 90º Macho
497504 d
r i
R
D
o L1
s
L
Size d x R 20 x 1/2" 25 x 3/4" 32 x 1" 40 x 1" 40 x 1.1/4" 40 x 1.1/2" 50 x 1.1/2" 63 x 1.1/2" 63 x 2"
A
D
L
38 38 43 47 47 47
14 18 24 30 30 30 38 48 48
87
52 59 59
L1 21 31 35 37
97
118
129 132 132
175 179
UC
458
200 200
77
96
120 187 202 250
40 40 40 44 48
148
W
48 48 48 48 24
296 458 471
32
PE Male Transition Elbow 45º
497604
Codo de Transición PE de 45º Macho
d
R
D
L1 L
30
Size d x R
D
L
L1
W
UC
32 x 1" 40 x 1" 40 x 1.1/4" 40 x 1.1/2" 50 x 1.1/2" 63 x 1.1/2" 63 x 2"
24 30 30 30 38 48 48
141 145 148 148
35 37
175
150
96 96 96 96
165 192 196
40 40 49 44 48
185 185
271
465 470
48 24
32
Fittings / Accesorios F
PE Cast Iron Flange Transition Coupler
497704
Enlace de Transición Bridado - PE Hierro Fundido
i t
t
t
S
i A
n p 1 N D D D D
d
1 d
g s L1
L2 L
Size d x DN 63 x 50 90 x 80 110 x 100 125 x 100 160 x 150 180 x 150 225 x 200
A
L
L1
L2
D1
57
217 216 223 235
57 73
100 68
104
268 284 314
93
70
79
87 105
116 138
105
61 62 73 72
139 159 159 215 215
119
74
270
80 85
d1
D
Dp
s
t
43
165
125
200 220 220 285 285 340
160 180 180 240 240
18 18 18 18
20 20
22 22 22
24 24
67
84 98
125 140
176
295
No. of holes
W grams
4 8 8 8 8 8 8
22 22
26
UC
4200 5940 7280
4 4 4 4
13400 15246
1 1 1
7759
23919
/
A c c e
PE Cast Iron Spigot Transition Coupler
495704
Enlace de Transición Espiga - PE Hierro Fundido
s o r
H
i A
D
N D
d
1 d
L2
o s
L1 L
Size d x DN
A
L
L1
L2
D
90 x 80 110 x 100 125 x 100 160 x 150 180 x 150 225 x 200
69 79
254
73
106
87 104 114 140
280
80 85
98 118 118 170 170
275
322 339 372
97
104 118
112 107 124
127 132
d1
H
67
94
84 98
96 91
140
102 103 109
125
222
176
W grams
UC
2874 4170 4569 8105 10121 12284
Full Face Flange
64
32 16 16 16 16
490209
Brida de Cara Plana L a
L1
s
Size d 90
p D
1 d D
D
L
L1
D
D1
a
Dp
s
W
UC
118
86
220
98
12
163
20
995
18
31
Fittings / Accesorios F i t
Stub Flange
490207
Adaptador de Brida
t
L a L1
i n g
1 D d
D
s
/
A c
Maximum Pressure: (cold water)
up to 180mm PN16
From 200mmPN 12.5
Presión máxima: PN (agua fría)
up to 180mm PN16
From 200mmPN 12.5
Size d
L
L1
20
85 85 85 85 104 120 130 140 160 182 180 180 198 200 200
45 40 60 60
25 32 40 50
c
63 75
e
90 110
s o r i
125 140 160 180 200
225 250 280 400
286
10
75
11 12
87
14
92 96
16 17
110
18
132
45 58 68 78 88 102
26 32
UC
26
160 160 144 80 48
42
57 84
61 75
132 220
32
89 105
322
24
16
475 747 945 1290 1600 1990 3100 3360 5080
125 132 155 175 187
232 235
268 268 320 320 370 430 482
40 45
W
40 50
212 212
30
175 195
D1
138 158 158 188
32 32 35 35 35
145 160 160
D
122
25 25 25
135 135
215 255
7 9
130 130 140
228 238
315 355
a
285
291 335 373
24 10
6
4 4
6 4
3 1 1 1 1
5625
7470 10475 14970
427
o s
Flange Backing Ring
09903
Brida Revestida s
p 1 D D D
t
Flange 20 x 1/2" 25 x 3/4" 32 x 1" 40 x 1.1/4" 50 x 1.1/2" 63 x 2" 75 x 2.1/2" 90 x 2.1/2" 90 x 3" 110 x 4" 125 x 4" 140 x 5" 160 x 6" 180 x 6" 200 x 8" 225 x 8" 250 x 10" 250 x 10" BS 280 x 10" 280 x 10" BS 315 x 12" 315 x 12" BS 355 x 14" BS
32
D
Dp
D1
s
95 105
65 75
140 150
85 100 110
28 34 42
14 14 14 18 18 18 18 18 18 18 18 18
115 165
125
185 185 200 220 220 250 285 285 340 340
145 145 160 180 180 210 240 240
395 395 395 395
350
445 445 520
295 295
355 350
355
400 406 470
51 62 78
92
102 108 128
135 158 178 188
235
238 288 288 294 294 338 338
376
22 22 22 22 22 22 22 22 22 22 26
t 12 14
16
18 18 18 20 20 20
22 22 22 24 24 24 24
26 26 26 26 26 26 28
No. Holes 4 4 4 4 4 4 4 8 8 8 8 8 8 8 8 8
12 8
12 8
12 12 12
Wastewater Line / Aguas residuales
Wastewater System We Make the Connection Polyethylene offers the ideal cost-effective and technically superior alternative to other materials, requiring minimal effort to install, reducing the number of
W a s t e w
connections required and increasing the system lifespan.
a
The Plasson System constitutes an excellent investment for both public wastewater
t
infrastructures and private wastewater systems.
e r
The Plasson wastewater system offers a strong, long-life and is resistent to axial loads through its special versatile products that can be completely fused after being laid.
L i n e / A g u a s r e s i
Systemas de Aguas Residuales Hacemos la Conexión En comparación con otros materiales, el polietileno constituye la alternativa ideal en términos de costo-benecio y superioridad téchnica, ya que requiere
d u a l e s
un mínimo esfuerzo de instalación, con menos conexiones, y asegura una larga vida útil. El sistema de Plasson es una inversión excelente, tanto para las infraestructuras públicas de aguas residuales como para los sistemas privados. Los sistemas de Plasson para aguas residuales son muy duraderos y resistentes a las cargas axiales, gracias a la versatilidad de sus productos que pueden fusionarse completamente después de la instalación. 33
Wastewater Line / Aguas residuales W a
Wastewater Adjustable Saddle
s
Ramal Para Aguas Residuales
475804 d 1 A
t H
e w a
d
B
t e r L
Size d x d1
B
H
A
200 x 160 225 - 250 x 160 280 - 315 x 160 355 - 560 x 160
208
202 202 202 202
105 105 105 105
225
247
263
L Max. 12º Max. 12º Max. 12º Max. 12º
W
UC
2050 2010 2070 2080
4 4 4 4
i n e
Wastewater Saddle 45º - Inlet 110
4758A4 d1
Ramal 45º de Salida Para Aguas Residuales /
H
A 4 5 º
g u
d
a
L
s r e s
B
Size d x d1
L
B
H
W
UC
160 - 200 x 110 225 - 315 x 110
255 255
221
182
158 158
685 710
10 10
i
Wastewater Saddle PVC/PP Adaptor Inlet
d
Collarín lightt de transición paraaguas residuales de PE A PP/PVC
4758V4
u
D d1
a 1 L
l
H
e s B
34
ø d
L
Size d x d1
B
H
L
L1
D
W
UC
200 x 160 225 - 250 x 160 280 - 315 x 160 355 - 560 x 160
208
125 125 125 125
290 290 290 290
80 80 80 80
190 190 190 190
1660 1309
4 4 4 4
225
247
263
1326 1430
Wastewater Line / Aguas residuales W
Wastewater Saddle Spigot Inlet
4758S4
Collarín lightt para aguas residuales con salida espiga
a s
d1
t e H
w a ø d
B
t
L
e r Size d x d1
B
H
L
W
UC
200 X 160 225 - 250 x 160 280 - 315 x 160 355 - 560 x 160
208
125 125 125 125
290 290 290 290
1091
4 4 4 4
225
247
263
1239
1260 1300
L i n
Wastewater Adjustable Elbow One Sided
4747D4
e
Codo Ajustable Para Aguas Residuales /
L (max, when straight) L2
A A 1 1 D d
D
g
d
L 1
u a
Size d
SDR
D
D1
L
L1
L2
A
W
160
17
193
141
298
78
98
105
3030
UC
s
6
r e
Wastewater Manhole Adaptor
37020/477207*
Adaptador Para Pozo de Aguas Residuales
s i d u
L
a d1
l
H
d
e
D
Size d
L
d1
D
110
135 135 135 135 135 135 135 135 135 135 135 135 135 135 135
97 111 123
216 235
125
140 160* 180 200 225* 250 280*
315 355 400 450 500 560
141
157 176
198 220 247 278
313 353 397
441 494
254 280
335 355 355 400 400 450 500 560
H 37 39 39 39 66 56 44 54
39 46 50
59
592 651
50 54
705
51
W 1650 1800 1950 2524 3550 3660 3902 3740 5027 5130 6480 8260 22350 23600 34500
UC
s
6 4
2 2 2 2 2 2 1 -
35
Wastewater Line / Aguas residuales W a
Wastewater PE to PVC Adaptor
s
Adaptador Para PE A PVC
4701V4
t e
A
d
w a
L2
r
L1 L
t e
D
Size d
L
L1
L2
D
A
W
UC
160
187
90
77
193
106
-
-
L i n e
Wastewater Adjustable Elbow PE to PVC
4747V4
Codo Ajustable de Transicion de PE a PVC /
L (max, when straight)
A A
L 1
1 2 º
g D
d
1 1 d D
L2
u a s
Size d x d1 160 X 160
D
D1
193
L 253
180
L1 78
L2
A
80
105
W
UC
2140
-
r e s i d
Wastewater Adaptor for Clay Pipe
u
Adaptador Para Tubería Cerámica
37980
a
L
l e s
N D
d
L2
36
Size d x DN
D
L
L1
160 X 186 160 X 204
227
236
249
245
121 121
L2 98 98
D
L1
W
UC
1072 1087
-
Wastewater Line / Aguas residuales W
Wastewater Spigot Adaptor for Clay Pipe
37117
Adaptador Espiga Para Tubería Cerámica
a s t
N D
d
D
e w
L2
L1
a
L
Size d x DN
D
L
L1
160 X 186 160 X 204
227
248 248
121 121
249
t
L2 74 74
W
UC
1067 1085
-
e r L i
Wastewater Elbow 45º
470604
n e
Codo 45º Para Aguas Residuales D d
/ L1 L
A Size d
L
L1
D
A
160
325
98
193
106
W 2000
UC -
g u a
Wastewater Elbow 30º
473304
Codo 30º Para Aguas Residuales
s r
D
d
e s L1
i
L
Size d
L
L1
D
A
160
302
98
193
106
W 1850
UC
d
-
u a l
Wastewater Elbow 15º
473704
e s
Codo 15º Para Aguas Residuales
D
d
L1 L
Size d
L
L1
D
A
160
267
98
193
106
W 1740
UC -
37
Technical Specifications
Technical Specications for Plasson ElectroFusion Fittings Pressure Rating
Material
All Plasson ElectroFusion Fittings are rated: • PN 16 (Water) • MOP10 (Gas)
All Plasson ElectroFusion ttings are produced from material class PE100 which conform to international standards for potable water and natural or suitable manufactured gas systems.
Lightt (Page 9) are rated: • PN10 (Water)
Production from PE80, available upon request
Note: for further details, see the notations on each tting or consult your Plasson representative
Suitable Pipes - PE80, PE100 PEX (most ttings)* Plasson’s ElectroFusion Fittings: • Up to 75mm (Inclusive) are Weldable to Pipes SDR > 11 > • 90mm & Up are Weldable to Pipes SDR 17 Note: for tapping SDR > 11 pipes (200mm & up), please consult your Plasson representative
Standards Plasson ElectroFusion ttings are designed, tested and quality controlled according to Plasson’s internal standards. These standards are based on the following international
standards: EN 1555 EN 12201
NF 136 AS/NZS 4129
*Please consult your Pla sson representative
WIS 4-32-14
LightFit:
WIS 4-32-15
• 90mm are Weldable to Pipes SDR > 26 • 110mm - 800mm are Weldable to Pipes SDR > 33
Quality Plasson has incorporated a quality assurance system in
Wastewater Saddle:
accordance with ISO 9001. Operating approval according to ISO 9001 was granted to Plasson by the Israeli Standard Institute. Operating according to the ISO 9001 quality assurance system imposes stringent standards of control throughout the manufacturing processes.
• 200 mm & Up are Weldable to Pipes SDR > 26
Wastewater Adjustable Elbow: • 160 mm is Weldable to Pipes SDR > 17
Abbreviations used on the product description pages of this catalog: A, A1
Height of shroud from centerline
d, d1 D, D1
Nominal diameter of tting or outlet
DN
Diameter Nominal bore corresponding approximately to the inside diameter of the pipe
Dp G, R, Rp H
Pitch circle diameter of bolt holes in anges
Threaded outlet diameter Height
L, L1, L2 n S t W UC
Length Number of bolt holes in anges Diameter of bolt holes in anges Thickness of metal ange
Weight in grams Units per carton
Fusion and cooling time are specied on the individual product.
Whereas the products shown in this catalogue illustrate and describe the current state of their development, Plasson reserves the right at all times to make such technical alterations as it shall see t to its products. Although every care has been taken in the preparation of the information, specications and other data included in this catalogue, we cannot rule out inadvertent errors or omissions. Purchasers should take into account possible deviations or variations which will not substantially diminish the functionality or performance of the products, and, in many cases, are designed to improve the same.
Plasson® is the Registered Trademark of Plasson Ltd. or Plasson Maagan Michael Industries Ltd. Plasson’s products are protected by patents, trademark, design and copyright laws.
Especificaciones técnicas
Especifcaciones técnicas para los accesorios ElectroFusion de Plasson Presiones nominales
Material
Las presiones nominales de todos los accesorios ElectroFusion de PLASSON son las siguientes: • PN 16 (Agua) • MOP10 (Gas) Accesorios LIGHTFIT (Página 9): • PN10 (Agua)
Todos los accesorios ElectroFusion de Plasson se fabrican con material de clase PE100, de conformidad con las normas
Nota: para obtener más información, vea las indicaciones en cada accesorio o consulte a su representante de Plasson.
Compatibilidad con la tubería - PE80, PE100 PEX (la mayoría de los accesorios)* Los accesorios ElectroFusion de PLASSON se pueden soldar: • Hasta 75mm (inclusive), en tuberías SDR > 11 > • De 90mm en adelante, en tuberías SDR 17 Nota: para soldar en tuberías SDR > 11 (200mm en adelante), consulte a su representante de Plasson. *Consulte a su representante de Plasson
internacionales para sistemas de agua potable y gas natural o procesado. Accesorios de PE80, disponibles a petición del cliente.
Normativa El diseño, las pruebas y el control de calidad de los accesorios ElectroFusion de Plasson se llevan a cabo de acuerdo con
las normas internas de Plasson, basadas en las siguientes normativas internacionales:
EN 1555 EN 12201
NF 136 AS/NZS 4129 WIS 4-32-14 WIS 4-32-15
Aseguramiento de Calidad
LightFit: • 90mm en tuberías SDR > 26 • 110mm - 800mm en tuberías SDR > 33
Collarín para aguas residuales: • De 200 mm en adelante en tuberías SDR > 26
Codo ajustable para aguas residuales:
Plasson utiliza el sistema de aseguramiento de calidad conforme a la normativa ISO 9001. La certicación de la empresa de acuerdo con ISO 9001 le fue otorgada a Plasson por el Instituto Israelí de Normas Industriales. La operación conforme a la normativa de aseguramiento de calidad ISO 9001 impone estrictos
procedimientos de control durante todos los procesos de fabricación.
• 160 mm en tuberías SDR > 17
Abreviaturas utilizadas en la descripción de productos de este catálogo: A, A1
Altura desde la línea central a la cubierta del resistor
d, d1 D, D1
Diámetro nominal del accesorio o salida Diámetro
DN
Diámento nominal interno, correspondiente aproximadamente al diámetro interno del tubo
Dp G, R, Rp H
Diámetro de los oricios en las bridas
Diámetro de la salida roscada Altura
L, L1, L2 n S t W UC
Longitud Número de oricios en las bridas Diametro de los oricios p/tornillos en las bridas
Grosor de la brida metálica Peso en gramos Cantidad por caja de cartón
Los tiempos de soldadura y enfriamiento se indican en cada producto.
Si bien en este catálogo se ilustran y describen los productos en el estado actual de su desarrollo, PLASSON se reserva el derecho de introducir en cualquier momento las modicaciones técnicas que considere convenientes. La preparación de la información, especicaciones y otros datos se ha hecho con el mayor cuidado, no obstante lo cual no podemos asegurar que estén libres de errores u omisiones involuntarios. El cliente debe tener en cuenta la posibilidad de desviaciones o variaciones que no afectarán signicativamente el funcionamiento o rendimiento de los productos y que, en muchos casos, están destinadas a mejorarlos. Plasson™ es la marca registrada de Plasson Ltd. o Plasson Maagan Michael Industries Ltd. Los productos de Plasson están protegidos por derechos de patente, marcas comerciales, diseño y leyes de copyright.
Controllers C o n t r o l l e r s
The Smart System-Plasson ElectroFusion
Plasson offers quality tools and control boxes ensuring easy installation and safe, dependable connections. All Plasson products combine to form the latest state-of-the art high performance pipe joining solution. Plasson ttings include an automatic recognition system which is part of the complete smart system. The entire ElectroFusion process is executed and fully monitored by the computerized control box. Plasson ElectroFusion ttings can be used with Plasson’s computerized smart-system control box or with standard barcode systems. Each Plasson ElectroFusion tting comes complete with a barcode.
Plasson provides superior products and unmatched service based on over 40 years in the eld.
For our complete tooling range please ask your local Plasson representative.
Controllers
PLASSON Control Box product family includes the following features:
40
•
Automatic (Smart-System) welding for PLASSON ElectroFusion couplings up to 12 IPS
•
Ergonomic design
•
Fusion process supervision system
•
Fully monitored welding process
•
4 x 20 alphanumeric character display with backlight and adjustable contrast
•
Easy end user oriented data input
• • •
Highly exible welding cable Reduced service expense by software controlled calibration Easy data transfer to PC printer or portable memory box
Controllers C
Monomatic Data (USB)
3.0206.000
SmartFuse welding device
n
Scope of application The electrofusion control units of type Monomatic Data (USB) are solely meant for the welding of thermoplastic pipes (e.g. made of PE-HD, PE80, PE100 or PP) when used with electrofusion ttings that have an input voltage of less than 48V. These devices are conforming to the standards DVS 2208-1 and ISO-12176-2, of which the applicable standards for the electrofusion ttings to be used are derived from.
t r o
Range of tting dimensions For which range of tting dimensions an electrofusion control unit can be used depends essentially on the power consumption of the used ttings. Since the power consumption of the ttings is different for different tting manufacturers, a general statement concerning this point cannot be made. When in doubt, each single case has to be checked separately. For electrofusion control units of type Monomatic Data (USB) the following general statement can be made, with the assumption, that all welding processes were made one after another, i.e. that the control unit is able to cool down during the preparation time of the next tting: Usage for dimensions from 20 to 355 mm without limitation. When working with dimensions from 400 mm on, longer cool-down times must be provided for because otherwise the device might show the "Device too hot" error message. In this case, it is necessary to let the device cool down before putting it to use again. Before processing ttings in this dimension range, you have to check that the welding current demand of the tting does not continuously exceed the output current of the device and that the maximum output current is not exceeded. All above made statements refer to an ambient temperature of 20 °C.
Technical Data General Output voltage Data recording Power (60 % ON time) according to ISO 12176-2 Operating temperature range International protection Application class Conformity ISO 12176-2 Class - classication
Manual input of ttingcode Manual input of
welding parameters Manual input of
welding parameters
e r s
4 × 20 Characters (alphanum.), background lighting 16 [kg]
Yes
Product weight
2050 W (55.9 A)
(excl. welding cable)
Product weight
18 [kg]
-10 to +50 [°C] IP54
(incl. welding cable) Dimensions L × W × H
450 × 325 × 380 [mm]
1 CE P2 3 U S1 F A D M
Data recording The electrofusion control unit Monomatic Data (USB) provides data recording for 250 welding cycles.
Packaging No Yes No No, UOUT: 8 to 48 V, tWELD: 0 to 9999 s No, UOUT: 48V (preset), tWELD: 0 to 9999 s
Type Dimensions
Type of voltage AC Nominal voltage 230 [V] Nominal voltage range (tolerance) 185 to 300 [V] Nominal frequency 50 [Hz] Nominal frequency range (Tolerance) 40 to 70 [Hz] Power factor cos ρ 0.6 to 0.9 (phase-angle control) Nominal current 16 [A] Power consumption 3600 [VA] Length of cord 4.5 [m]
Flightcase 500 × 420 × 385 [mm] 8 [kg] 24 [kg]
Packaging weight
Transport weight
Recorded data General data Fusion data
Input/Mains
Plug type
l
Steel plate with plastic casing
Material Display
40 AC [V]
Input of welding parameters Barcode with reading pen (with scanner optional) SmartFuse/(FUSAMATIC)
l
Casing Monomatic Data (USB)
3_0206_000
o
Device data
Time, date, report number, ambient temperature Voltage, Current, Energy, Nominal and Actual Welding Time, Mode, Resistance, Error messages with 10 voltage and current values Serial Number, Inventory Number, Date of last Service, Working Hours, System Conguration
Duty cycle according to ISO 12176-2 at 30%, 60% and 100%, Test time t = 60 minutes Test time 60 min
Output power Output power Output current at UOUT = 36 V at UOUT = 40 V IOUT
30% 60% 100%
2700 W 2050 W 1600 W
3000 W 2250 W 1800 W
74.1 A 55.9 A 44.7 A
Euro plug
Output Type of voltage Output voltage Output current (max.) Output current (t ∞) Output current (min.) Energy adjustment
AC
Welding cable length Welding cable mounting Welding terminals
5 [m], other lengths on request Fixed 4,0 [mm] (optional 4,7 [mm])
→
40 [V] 110 [A] 30 [A] 2 [A]
None
Monitoring functions Input Output
Voltage, Current, Frequency Voltage, Current, Resistance,
Contact, Short circuit Other Error messages
System, Working Temperature, Service Plain Text, Acoustic Signal
41
Controllers C o
Polymatic Plus (USB)
n
Scope of application
t r o l l e r s
3.0206.103
The electrofusion control units of type Polymatic Plus (USB) are solely meant for the welding of thermoplastic pipes (e.g. made of PE-HD, PE80, PE100 or PP) when used with electrofusion ttings that have an input voltage of less than 48V. These devices are conforming to the standards DVS 2208-1 and ISO-12176-2, of which the applicable standards for the electrofusion ttings to be used are derived from.
Range of tting dimensions For which range of tting dimensions an electrofusion control unit can be used depends essentially on the power consumption of the used ttings. Since the power consumption of the ttings is different for different tting manufacturers, a general statement concerning this point cannot be made. When in doubt, each single case has to be checked separately. For electrofusion control units of type Polymatic Plus (USB) the following general statement can be made, with the assumption, that all welding processes were made one after another, i.e. that the control unit is able to cool down during the preparation time of the next tting: Usage for dimensions from 20 to 630 mm without limitation. When working with dimensions from 630 mm on, longer cool-down times must be provided for because otherwise the device might show the "Device too hot" error message. In this case, it is necessary to let the device cool down before putting it to use again. Before processing ttings in this dimension range, you have to check that the welding current demand of the tting does not continuously exceed the output current of the device and that the maximum output current is not exceeded. All above made statements refer to an ambient temperature of 20°C.
Technical Data
Casing Polymatic Plus (USB)
3_0206_103
General Output voltage Data recording Power (60 % ON time) according to ISO 12176-2 Operating temperature range International protection Application class Conformity ISO 12176-2 Class - classication
Manual input of ttingcode Manual input of
welding parameters Manual input of
welding parameters
Yes
Product weight
2600 W (72.5 A)
(excl. welding cable)
Product weight
18 [kg]
-10 to +50 [°C] IP54
(incl. welding cable) Dimensions L × W × H
450 × 325 × 380 [mm]
1 CE P2 4 U S1 V AK D X
Data recording The electrofusion control unit Polymatic Plus (USB) provides data recording for approx. 1000 welding cycles.
Packaging Yes Yes Yes Yes, UOUT: 8 to 48 V, tWELD: 0 to 9999 s No, UOUT: 48V (preset), tWELD: 0 to 9999 s
Type Dimensions
Type of voltage AC Nominal voltage 230 [V] Nominal voltage range (tolerance) 185 to 300 [V] Nominal frequency 50 [Hz] Nominal frequency range (Tolerance) 40 to 70 [Hz] Power factor cos ρ 0.6 to 0.9 (phase-angle control) Nominal current 16 [A] Power consumption 3600 [VA] Length of cord 4.5 [m]
Transport weight
Recorded data General data Fusion data
Type of voltage Output voltage Output current (max.) Output current (t ∞) Output current (min.) Energy adjustment
AC
Welding cable length Welding cable mounting Welding terminals
5 [m], other lengths on request Fixed 4 [mm] 4 to 4.7 [mm]
→
Optional adapters for terminals
8 to 48 [V] 110 [A] 40 [A] 2 [A]
Temperature compensation
Monitoring functions Voltage, Current, Frequency Voltage, Current, Resistance,
Contact, Short circuit Other Error messages
42
Fitting data Device data Workercode
Time, date, report number, ambient temperature Voltage, Current, Energy, Nominal and Actual Welding Time, Mode, Resistance, Error messages with 10 voltage and current values Barcode Information (ISO/TR 13950), Type, Dimension, Manufacturer Serial Number, Inventory Number, Date of last Service, Working Hours, System Conguration Barcode (PF or ISO 12176-3) for operator identication and access to manual input and system conguration
Traceability functions Job-code
Job number max. 40-digits
Workercode
(alphanumerical), input by barcode or manual ISO-1276-3
Euro plug
Output
Input Output
Flightcase 500 × 420 × 385 [mm] 8 [kg] 24 [kg]
Packaging weight
Input/Mains
Plug type
4 × 20 Characters (alphanum.), background lighting 16 [kg]
8 to 48 DC [V]
Input of welding parameters Barcode with reading pen (with scanner optional) SmartFuse/(FUSAMATIC)
Steel plate with plastic casing
Material Display
System, Working Temperature, Service Plain Text, Acoustic Signal
Weld Number Welding Barcode Traceability Barcode of Fitting Traceability Barcode of 1st pipe Traceability Barcode of 2nd pipe 3rd Traceability Code / Infotext
DVS 2207 / 2208 ISO-TR 13950 ISO-12176-4 ISO-12176-4 ISO-12176-4 ISO-12176-4 / 40-digit
(alphanumerical)
Duty cycle according to ISO 12176-2 at 30%, 60% and 100%, Test time t = 60 minutes Test time 60 min
Output power Output power Output current at UOUT = 36 V at UOUT = 40 V IOUT
30% 60% 100%
3500 W 2600 W 2100 W
3900 W 2900 W 2350 W
97.3 A 72.5 A 58.4 A
Controllers C
Tiny Data MF (USB)
3.0208T108
n
Scope of application The electrofusion control units of type Tiny MF (USB) are exclusively for the electrofusion of thermoplastic pipes (e.g. made of PE-HD, PE80, PE100 or PP) by use of electrofusion ttings with a welding voltage lower than 48V. The control units are conform to the standard DVS 2208-1 as well as to ISO-12176-2 which refer to the standards applicable for the electro fusion ttings to be used.
t r o
Range of tting dimensions For which range of tting dimensions an electrofusion control unit can be used depends essentially on the power consumption of the used ttings. Since the power consumption of the ttings is different for different tting manufacturers, a general statement concerning this point cannot be made. In case of doubt, each single case has to be checked separately. For electro fusion control units of type Tiny MF (USB) the following general statement can be made, with the assumption, that all welding processes were made one after another, i.e. that the control unit is able to cool down during the preparation time of the next tting: Usage for dimensions from 20 to 355 mm without limitation. When working with dimensions from 400 mm on, longer cool-down times must be provided for because otherwise the device might show the "Device too hot" error message. In this case, it is necessary to let the device cool down before putting it to use again. Before processing ttings in this dimension range, you have to check that the welding current demand of the tting does not continuously exceed the output current of the device and that the maximum output current is not exceeded. All above made statements refer to an ambient temperature of 20°C.
Technical Data General Output voltage Data recording Power (60 % ON time) according to ISO 12176-2 Operating temperature range International protection Application class Conformity ISO 12176-2 Class - classication
Manual input of ttingcode Manual input of
welding parameters Manual input of
welding parameters
Product weight
2050 W (55.9 A)
(excl. welding cable)
Product weight
16.5 [kg]
-10 to +50 [°C] IP54
(incl. welding cable) Dimensions L × W × H
325 × 275 × 290 [mm]
1 CE P2 3 U S1 V AK D X
Data recording
Yes Yes Yes, UOUT: 8 to 48 V, tWELD: 0 to 9999 s No, UOUT: 48V (preset), tWELD: 0 to 9999 s
Type of voltage Output voltage Output current (max.) Output current (t ∞) Output current (min.) Energy adjustment
AC
Welding cable length Welding cable mounting Welding terminals
4 [m], other lengths on request Fixed 4,0 [mm] (optional 4,7 [mm])
8 to 48 [V] 110 [A] 30 [A] 2 [A]
Temperature compensation
Monitoring functions Input Output
Voltage, Current, Frequency Voltage, Current, Resistance,
Contact, Short circuit Other Error messages
s
The electrofusion control unit Tiny Data MF (USB) provides data recording for approx. 1000 welding cycles.
Type Dimensions
Flightcase 500 × 420 × 385 [mm] 8 [kg] 24 [kg]
Packaging weight
Transport weight
Recorded data General data Fusion data Fitting data Device data Workercode
Time, date, report number, ambient temperature Voltage, Current, Energy, Nominal and Actual Welding Time, Mode, Resistance, Error messages with 10 voltage and current values Barcode Information (ISO/TR 13950), Type, Dimension, Manufacturer Serial Number, Inventory Number, Date of last Service, Working Hours, System Conguration Barcode (PF or ISO 12176-3) for operator identication and access to system conguration
Traceability functions Job-code
Job number max. 40-digits
Workercode
(alphanumerical), input by barcode or manual ISO-1276-3
Euro plug
→
r
Packaging Yes
Type of voltage AC Nominal voltage 230 [V] Nominal voltage range (tolerance) 185 to 300 [V] Nominal frequency 50 [Hz] Nominal frequency range (Tolerance) 40 to 70 [Hz] Power factor cos ρ 0.6 to 0.9 (phase-angle control) Nominal current 16 [A] Power consumption 3200 [VA] Length of cord 5 [m]
Output
e
4 × 20 Characters (alphanum.), background lighting 14 [kg]
Yes
Input/Mains
Plug type
l
Steel plate
Material Display
8 to 48 DC
Input of welding parameters Barcode with reading pen (with scanner optional) SmartFuse/(FUSAMATIC)
l
Casing Tiny Data MF (USB)
3_0208T108
o
System, Working Temperature, Service Plain Text, Acoustic Signal
Weld Number Welding Barcode Traceability Barcode of Fitting Traceability Barcode of 1st pipe Traceability Barcode of 2nd pipe 3rd Traceability Code / Infotext
DVS 2207 / 2208 ISO-TR 13950 ISO-12176-4 ISO-12176-4 ISO-12176-4 ISO-12176-4 / 40-digit
(alphanumerical)
Duty cycle according to ISO 12176-2 at 30%, 60% and 100%, Test time t = 60 minutes Test time 60 min
Output power Output power Output current at UOUT = 36 V at UOUT = 40 V IOUT
30% 60% 100%
2700 W 2050 W 1600 W
3000 W 2250 W 1800 W
74.1 A 55.9 A 44.7 A
43
Controllers C o
Digimatic Data (USB)
n
Scope of application
t r o l l e r s
The electrofusion control units of type Digimatic Data (USB) are solely meant for the welding of thermoplastic pipes (e.g. made of PE-HD, PE80, PE100 or PP) when used with electrofusion ttings that have an input voltage of less than 48V. These devices are conforming to the standards DVS 2208-1 and ISO-12176-2, of which t he applicable standards for the electrofusion ttings to be used are derived from.
Range of tting dimensions For which range of tting dimensions an electrofusion control unit can be used depends essentially on the power consumption of the used ttings. Since the power consumption of the ttings is different for different tting manufacturers, a general statement concerning this point cannot be made. When in doubt, each single case has to be checked separately. For electrofusion control units of type Digimatic Data (USB) the following general statement can be made, with the assumption, that all welding processes were made one after another, i.e. that the control unit is able to cool down during the preparation time of the next tting: Usage for dimensions from 20 to 355 mm without limitation. When working with dimensions from 400 mm on, longer cool-down times must be provided for because otherwise the device might show the "Device too hot" error message. In this case, it is necessary to let the device cool down before putting it to use again. Before processing ttings in this dimension range, you have to check that the welding current demand of the tting does not continuously exceed the output current of the device and that the maximum output current is not exceeded. All above made statements refer to an ambient temperature of 20°C.
Technical Data
Casing Digimatic Data (USB)
3_0206_001
General Output voltage Data recording Power (60 % ON time) according to ISO 12176-2 Operating temperature range International protection Application class Conformity ISO 12176-2 Class - classication
Barcode with reading pen (with scanner optional) SmartFuse/(FUSAMATIC) Manual input of ttingcode Manual input of
welding parameters Manual input of
welding parameters
Product weight
2050 W (55.9 A)
(excl. welding cable)
Product weight
18 [kg]
-10 to +50 [°C] IP54
(incl. welding cable) Dimensions L × W × H
450 × 325 × 380 [mm]
1 CE P2 3 U S1 V AK D X
Data recording
Optional No No, UOUT: 8 to 48 V, tWELD: 0 to 9999 s Yes, UOUT: 48V (preset), tWELD: 0 to 9999 s
Euro plug AC
Welding cable length Welding cable mounting Welding terminals
5 [m], other lengths on request Fixed 4 [mm] 4 to 4.7 [mm]
→
Optional adapters for terminals
8 to 48 [V] 110 [A] 30 [A] 2 [A]
Temperature compensation (manual)
Monitoring functions Voltage, Current, Frequency Voltage, Current, Resistance,
Contact, Short circuit Other Error messages
Type Dimensions
System, Working Temperature, Service Plain Text, Acoustic Signal
Flightcase 500 × 420 × 385 [mm] 8 [kg] 24 [kg]
Packaging weight
Transport weight
Recorded data General data
Time, date, report number, ambient temperature, welder name, job number max. 20-digits
(alphanumerical) Fusion data
Type of voltage Output voltage Output current (max.) Output current (t ∞) Output current (min.) Energy adjustment
Input Output
The electrofusion control unit of type Digimatic Data (USB) provides data recording for approx. 250 welding cycles.
Packaging No
Type of voltage AC Nominal voltage 230 [V] Nominal voltage range (tolerance) 185 to 300 [V] Nominal frequency 50 [Hz] Nominal frequency range (Tolerance) 40 to 70 [Hz] Power factor cos ρ 0.6 to 0.9 (phase-angle control) Nominal current 16 [A] Power consumption 3600 [VA] Length of cord 4.5 [m]
Output
4 × 20 Characters (alphanum.), background lighting 16 [kg]
Yes
Input/Mains
Plug type
Steel plate with plastic casing
Material Display
8 to 48 DC [V]
Input of welding parameters
44
3.0206.001
Device data
Voltage, Current, Energy, Nominal and Actual Welding Time, Mode, Resistance, Error messages with 10 voltage and current values Serial Number, Inventory Number, Date of last Service, Working Hours, System Conguration
Duty cycle according to ISO 12176-2 at 30%, 60% and 100%, Test time t = 60 minutes Test time 60 min
Output power Output power Output current at UOUT = 36 V at UOUT = 40 V IOUT
30% 60% 100%
2700 W 2050 W 1600 W
3000 W 2250 W 1800 W
74.1 A 55.9 A 44.7 A
Controllers C
PolyControl Plus (USB) V2.0
3F0218V112
Universal EF Control Unit
n
Scope of application The electrofusion control boxes of type PolyControl Plus (USB) V2.0 are solely meant for the welding of thermoplastic pipes (e.g. made of PE-HD, PE80, PE100 or PP) when used with electrofusion ttings that have an input voltage of less than 48V. These devices are conforming to the standards DVS 2208-1 and ISO-12176-2, of which the applicable standards for the electrofusion ttings to be used are derived from.
t r o
Range of tting dimensions For which range of tting dimensions an electrofusion control unit can be used depends essentially on the power consumption of the used ttings. Since the power consumption of the ttings is different for different tting manufacturers, a general statement concerning this point cannot be made. When in doubt, each single case has to be checked separately. For electro fusion control boxes of type PolyControl Plus (USB) V2.0 the following general statement can be made with the assumption, that all welding processes are made one after another, i.e. that the control unit is able to cool down during the preparation time of the next tting: Usable for all dimensions with up to 85 A permanent current consumption without limitation. All above made statements refer to an ambient temperature of 20°C. Note: If the fan on the back side of the controller is not running, the dimension range is reduced to the following sizes: up to 250 mm without limit. 280-400 mm with cool down phases. You should not use the controller without a running fan for dimensions larger than 400 mm to avoid damaging the device.
Technical Data General Output voltage Data recording Power (60 % ON time) according to ISO 12176-2 Operating temperature range International protection Application class Conformity ISO 12176-2 Class - classication
Manual input of ttingcode Manual input of
welding parameters Manual input of
welding parameters
Product weight
3600 W (100 A)
(excl. welding cable)
Product weight
15.5 [kg]
-10 to +50 [°C] IP54
(incl. welding cable) Dimensions L × W × H
220 × 317 × 435 [mm]
1 CE P2 4 U S1 V AK D X
Data recording
Yes
Packaging
Yes Yes Yes, UOUT: 8 to 48 V, tWELD: 0 to 9999 s No, UOUT: 48V (preset), tWELD: 0 to 9999 s
Type Dimensions
500 × 420 × 385 [mm] 8 [kg] 24 [kg]
Packaging weight
Transport weight
Recorded data Fusion data
Voltage, Current, Energy, Nominal and Actual Welding Time, Mode, Resistance, Error messages with 10 voltage and current values Barcode Information (ISO/TR 13950), Type, Dimension, Manufacturer Serial Number, Inventory Number, Date of last Service, Working Hours, System Conguration Barcode (PF or ISO 12176-3) for operator identication and access to manual input and system conguration
Commission-Number (Job-Code)
Max. 40-digits (alphanumerical) by
Plug type
Euro plug
Worker Code
Barcode ISO-12176-3
DC
Weld Number Welding Barcode
8 to 48 [V] 110 [A] 85 [A] 2 [A]
Traceability Barcode of Fitting Traceability Barcode of 1st pipe Traceability Barcode of 2st pipe 3rd Traceability Code / Infotext
Welding cable length Welding cable mounting Welding terminals
Inductivity compensation 3 [m] Fixed 4,0 [mm] (optional 4,7 [mm]) Voltage, Current, Frequency Voltage, Current, Resistance,
Contact, Short circuit Other Error messages
Device data Worker Code
Traceability functions
DVS 2207 / 2208 ISO-TR 13950 ISO-12176-4 ISO-12176-4 ISO-12176-4 ISO-12176-4 / 40-digit
(alphanumerical)
Temperature compensation,
Monitoring functions Input Output
s
Flightcase
Fitting data
→
r
The electrofusion control box PolyControl Plus (USB) V2.0 provides data recording for approx. 1000 welding cycles and their traceability data conforming to ISO-12176-4:
Type of voltage AC Nominal voltage 230 [V] Nominal voltage range (tolerance) 185 to 300 [V] Nominal frequency 50 [Hz] Nominal frequency range (Tolerance) 40 to 70 [Hz] Power factor cos ρ 1 - PFC (EN 61000-3-3) Nominal current 16 [A] Power consumption 3600 [VA] Length of cord 4.5 [m]
Type of voltage Output voltage Output current (max.) Output current (t ∞) Output current (min.) Energy adjustment
e
4 × 20 Characters (alphanum.), background lighting 11 [kg]
Yes
Input/Mains
Output
l
Cast aluminium
Material Display
8 to 48 DC [V]
Input of welding parameters Barcode with reading pen (with scanner optional) SmartFuse/(FUSAMATIC)
l
Casing PolyControl Plus (USB) V2.0
3F0218V112
o
Duty cycle according to ISO 12176-2 at 30%, 60% and 100%, Test time t = 60 minutes Test time 60 min
Output power Output power Output current at UOUT = 36 V at UOUT = 40 V IOUT
30% 60% 100%
3960 W 3600 W 3240 W
4400 W 4000 W 3600 W
110 A 100 A 90 A
System, Working Temperature, Service Plain Text, Acoustic Signal
45
Soldadoras S o l d a d
ESPAÑOL
o r a s
El sistema inteligente ElectroFusion de Plasson Plasson ofrece herramientas y soldadoras automáticas de electrofusión de la más alta calidad, para facilitar la instalación y asegurar conexiones ables. Todos los productos de Plasson se combinan para brindar la solución más avanzada y eciente de conexión de tuberías. Los accesorios de Plasson contienen un sistema de reconocimiento automático que forma parte de todo el sistema inteligente. La soldadora automática ejecuta y supervisa todo el proceso de electrofusión. Los accesorios ElectroFusion de Plasson pueden utilizarse con la soldadora automática de Plasson, controlada por computadora, o con los sistemas estándar de código de barras. Cada accesorio (“tting”) ElectroFusion de Plasson se entrega completo, con su propio código de barras. Plasson se enorgullece de suministrar productos de excelente calidad y un servicio incomparable, respaldado por una experiencia de más de 40 años en el terreno. Para obtener información sobre toda la línea de herramientas, consulte a su representante local de Plasson.
Soldadoras La línea de soldadoras automáticas de PLASSON tiene las siguientes características: • • • • • • • • •
46
Soldadura automática para los enlaces ("cuplas") ElectroFusion de PLASSON hasta 12 IPS Diseño ergonómico Sistema de supervisión del proceso de electrofusión Soldadura totalmente monitorizada Pantalla de 4 x 20 caracteres alfanuméricos con iluminación de fondo y contraste ajustable Entrada de datos fácil y cómoda para el usuario Cable de soldadura altamente exible Ahorro en costos de servicio gracias a la calibración controlada por software Facilidad en la transferencia de datos a PC, impresora o dispositivo de memoria portátil
Soldadoras S
Monomatic Data (USB)
3.0206.000
Soldadora automática SmartFuse
o
Rango de aplicación
l
Las soldadoras de electrofusión del tipo Monomatic Data (USB) están exclusivamente destinadas a la soldadura de tubos termoplásticos (o sea de PE-HD, PE80, PE100 o PP) con accesorios de menos de 48V en su voltaje de entrada. Estos dispositivos cumplen las especicaciones de las normativas DVS 2208-1 e ISO-12176-2, de las cuales derivan las normas aplicables a los equipos de electrofusión.
d a d
Rango de dimensiones El rango de dimensiones de los accesorios para los cuales puede utilizarse una soldadora depende en primer lugar del consumo de energía de los accesorios. Dado que el consumo no es uniforme para todos los fabricantes, no es posible generalizar, y en caso de duda, es preciso examinar cada accesorio por separado. Para las soldadoras del tipo Monomatic Data (USB), y suponiendo que todas las operaciones de soldadura se realizan en secuencia, es decir que la soldadora tiene tiempo para enfriarse mientras se prepara el accesorio siguiente, se podría emitir la siguiente declaración general: Sin limitaciones para el uso con accesorios de 20 a 355 mm. Al trabajar con dimensiones a partir de los 400 mm se requieren periodos más prolongados de enfriamiento, porque de otro modo podría aparecer el mensaje de error "Device too hot" (Dispositivo recalentado). En tal caso será preciso dejar que el equipo se enfríe antes de volver a utilizarlo. Antes de procesar accesorios dentro
o r a s
de este rango de dimensiones es necesario comprobar que la demanda de corriente del accesorio no sobrepase constantemente la corriente de salida del dispositivo, y tener cuidado de no sobrepasar la corriente máxima de salida. Todo lo dicho se reere al trabajo con una temperatura ambiente de 20°C.
Caja
Especicaciones técnicas 3_0206_000
General
Tensión de salida Registro de datos Potencia (60% del tiempo ON) conformidad con ISO 12176-2 Rango de temperaturas Protección Clase de aplicación Conformidad con Clase ISO 12176-2 - clasicación
Monomatic Data (USB)
Material
Placa de acero con recubrimiento plástico
40 AC [V]
Pantalla
4 × 20 caracteres (alfanuméricos), iluminación de fondo 16 [kg]
Sí 2050 W (55.9 A) -10 a +50 [°C] IP54
1 CE P2 3 U S1 F A D M
Entrada de parámetros de soldadura Código de barras con lector
(escaneo opcional) SmartFuse/(FUSAMATIC) Entrada manual del código del
accesorio Entrada manual de parámetros de soldadura Entrada manual de parámetros de soldadura Entrada/Red eléctrica Tensión Tensión nominal Rango de tensión nominal
(tolerancia) Frecuencia nominal
No Sí No No, UOUT: 8 a 48 V, tWELD: 0 a 9999 s No, UOUT: 48V (prejado), tWELD: 0 a 9999 s 230 [V] 185 a 300 [V]
(Tolerancia) Factor de potencia cos ρ Corriente nominal Consumo eléctrico Longitud del cable
0.6 a 0.9 (control de desfase) 16 [A] 3600 [VA] 4.5 [m]
Tipo de enchufe
Euro plug
Tensión Tensión de salida Corriente de salida (max.) Corriente de salida (t ∞) Corriente de salida (min.) Ajuste de energía
AC
Longitud del cable de soldadura
5 [m], otras longitudes a pedido Fijo 4.0 [mm] (opcional 4.7 [mm])
Montaje del cable de soldadura
Terminales de soldadura
Funciones de monitorización Tensión de entrada Tensión de salida
Registro de datos
18 [kg] 450 × 325 × 380 [mm]
La soldadora Monomatic Data (USB) proporciona el registro de datos de soldadura para 250 ciclos.
Embalaje Tipo Dimensiones
Flightcase
Peso del embalaje
Datos registrados
500 × 420 × 385 [mm] 8 [kg] 24 [kg]
Datos generales Hora, fecha, número de informe, temperatura ambiente Datos de fusión
AC
Rango de frecuencia nominal
→
Dimensiones Long x An x Alt
Peso para el transporte
50 [Hz] 40 a 70 [Hz]
Salida
Peso del producto (sin cable de soldadura) Peso del producto (cable de soldadura incluido)
Datos del dispositivo
Tensión, corriente, consumo, duración del proceso (nominal y real), Hora, modo, resistencia, mensajes de error con 10 valores de tensión y corriente Nº de serie, Nº de inventario, Fecha del último servicio Horas de trabajo, Conguración del sistema
Ciclo de servicio conformidad con ISO 12176-2 a 30%, 60% y 100%, duración test t = 60 minutos Duración test 60 min
Potencia de salida a UOUT = 36 V
Potencia de salida a UOUT = 40 V
Corriente de salida IOUT
30% 60% 100%
2700 W 2050 W 1600 W
3000 W 2250 W 1800 W
74.1 A 55.9 A 44.7 A
40 [V] 110 [A] 30 [A] 2 [A]
Ninguno
Otro
Corriente, Frecuencia Corriente, Resistencia, Contacto, Cortocircuito Otro sistema, Temperatura de
Mensajes de error
trabajo, Servicio Texto, Señal acústica
47
Soldadoras S o
Polymatic Plus (USB)
l
Rango de aplicación
d
Las soldadoras de electrofusión del tipo Polymatic Plus (USB) están exclusivamente destinadas a la soldadura de tubos termoplásticos (o sea de PE-HD, PE80, PE100 o PP) con accesorios de menos de 48V en su voltaje de entrada. Estos dispositivos cumplen las especicaciones de las normativas DVS 2208-1 e ISO-12176-2, de las cuales derivan las normas aplicables a los equipos de electrofusión.
a d o r a s
3.0206.103
Rango de dimensiones El rango de dimensiones de los accesorios para los cuales puede utilizarse una soldadora depende en primer lugar del consumo de energía de los accesorios. Dado que el consumo no es uniforme para todos los fabricantes, no es posible generalizar, y en caso de duda, es preciso examinar cada accesorio por separado. Para las soldadoras del tipo Polymatic Plus (USB), y suponiendo que todas las operaciones de soldadura se realizan en secuencia, es decir que la soldadora tiene tiempo para enfriarse mientras se prepara el accesorio siguiente, se podría emitir la siguiente declaración general: Sin limitaciones para el uso con accesorios de 20 a 630 mm. Al trabajar con dimensiones a partir de los 630 mm se requieren periodos más prolongados de enfriamiento, porque de otro modo podría aparecer el mensaje de error "Device too hot" (Dispositivo recalentado). En tal caso será preciso dejar que el equipo se enfríe antes de volver a utilizarlo. Antes de procesar accesorios dentro
de este rango de dimensiones es necesario comprobar que la demanda de corriente del accesorio no sobrepase constantemente la corriente de salida del dispositivo, y tener cuidado de no sobrepasar la corriente máxima de salida. Todo lo dicho se reere al trabajo con una temperatura ambiente de 20°C .
Caja
Especicaciones técnicas 3_0206_103
General
Tensión de salida Registro de datos Potencia (60% del tiempo ON) conformidad con ISO 12176-2 Rango de temperaturas Protección Clase de aplicación Conformidad con Clase ISO 12176-2 - clasicación
Polymatic Plus (USB)
Material
Placa de acero con recubrimiento plástico
8 a 48 DC [V]
Pantalla
4 × 20 caracteres (alfanuméricos), iluminación de fondo 16 [kg]
Sí 2600 W (72.5 A) -10 a +50 [°C] IP54
1 CE P2 4 U S1 V AK D X
Entrada de parámetros de soldadura Código de barras con lector
(escaneo opcional) SmartFuse/(FUSAMATIC) Entrada manual del código del
accesorio Entrada manual de parámetros de soldadura Entrada manual de parámetros de soldadura Entrada/Red eléctrica Tensión Tensión nominal Rango de tensión nominal
(tolerancia) Frecuencia nominal
Sí Sí Sí
Peso del producto (sin cable de soldadura) Peso del producto (cable de soldadura incluido) Dimensiones Long x An x Alt
Registro de datos soldadura para 1000 ciclos.
Embalaje Tipo Dimensiones
Flightcase
Peso del embalaje
Datos registrados Datos de fusión
Datos accesorio
Tensión, corriente, consumo, duración del proceso (nominal y real), Hora, modo, resistencia, mensajes de error con 10 valores de tensión y corriente Código de barras (ISO/TR 13950), Tipo, Dimensión,
Fabricante Datos del
Nº de serie, Nº de inventario, Fecha del último servicio, dispositivo Horas de trabajo, Conguración del sistema Código operador (PF o ISO 12176-3) identicación personal y acceso a entrada manual y conguración del sistema
Rango de frecuencia nominal
50 [Hz] 40 a 70 [Hz]
(Tolerancia) Factor de potencia cos ρ Corriente nominal Consumo eléctrico Longitud del cable
0.6 a 0.9 (control de desfase) 16 [A] 3600 [VA] 4.5 [m]
Funciones de rastreo
Tipo de enchufe
Euro plug
Tensión Tensión de salida Corriente de salida (max.) Corriente de salida (t ∞) Corriente de salida (min.) Ajuste de energía
AC
Código operador Número Sold. Código soldadura Rastreo código accesorio Rastreo código tubo 1 Rastreo código tubo 2 Rastreo código 3 / Infotext
Salida
→
Longitud del cable de soldadura Montaje del cable de soldadura
Terminales de soldadura Adaptadores opcionales para terminales
8 a 48 [V] 110 [A] 40 [A] 2 [A] Compensación de temperatura 5 [m], otras longitudes a pedido Fijo 4 [mm] 4 to 4.7 [mm]
Funciones de monitorización Tensión de entrada Tensión de salida
Corriente, Frecuencia Corriente, Resistencia, Contacto, Cortocircuito
Otro
Sistema, Temperatura de trabajo, Servicio Texto, Señal acústica
48 Mensajes de error
500 × 420 × 385 [mm] 8 [kg] 24 [kg]
Datos generales Hora, fecha, número de informe, temperatura ambiente
AC 230 [V] 185 a 300 [V]
450 × 325 × 380 [mm]
La soldadora Polymatic Plus (USB) proporciona el registro de datos de
Peso para el transporte
Sí, UOUT: 8 a 48 V, tWELD: 0 a 9999 s No, UOUT: 48V (prejado), tWELD: 0 a 9999 s
18 [kg]
Código
encargo y Nº (máximo 40 caracteres) ingreso por código de barras o
manual ISO-1276-3 DVS 2207 / 2208 ISO-TR 13950 ISO-12176-4 ISO-12176-4 ISO-12176-4 ISO-12176-4 / 40 caracteres
Ciclo de servicio conformidad con ISO 12176-2 a 30%, 60% y 100%, Duración test t = 60 minutos Duración test 60 min
Potencia de salida a UOUT = 36 V
Potencia de salida a UOUT = 40 V
Corriente de salida IOUT
30% 60% 100%
3500 W 2600 W 2100 W
3900 W 2900 W 2350 W
97.3 A 72.5 A 58.4 A
Soldadoras S
Tiny Data MF (USB)
3.0208T108
o
Rango de aplicación
l
Las soldadoras de electrofusión del tipo Tiny MF (USB) están exclusivamente destinadas a la soldadura de tubos termoplásticos (o sea de PE-HD, PE80, PE100 o PP) con accesorios de menos de 48V en su voltaje de entrada. Estos dispositivos cumplen las especicaciones de las normativas DVS 2208-1 e ISO-12176-2, de las cuales derivan las normas aplicables a los equipos de electrofusión.
d a d
Rango de dimensiones El rango de dimensiones de los accesorios para los cuales puede utilizarse una soldadora depende en primer lugar del consumo de energía de los accesorios. Dado que el consumo no es uniforme para todos los fabricantes, no es posible generalizar, y en caso de duda, es preciso examinar cada accesorio por separado. Para las soldadoras del tipo Tiny MF (USB), y suponiendo que todas las operaciones de soldadura se realizan en secuencia, es decir que la soldadora tiene tiempo para enfriarse mientras se prepara el accesorio siguiente, se podría emitir la siguiente declaración general: Sin limitaciones para el uso con accesorios de 20 a 355 mm. Al trabajar con dimensiones a partir de los 400 mm se requieren periodos más prolongados de enfriamiento, porque de otro modo podría aparecer el mensaje de error "Device too hot" (Dispositivo recalentado). En tal caso será preciso dejar que el equipo se enfríe antes de volver a utilizarlo. Antes de procesar accesorios dentro
o r a s
de este rango de dimensiones es necesario comprobar que la demanda de corriente del accesorio no sobrepase constantemente la corriente de salida del dispositivo, y tener cuidado de no sobrepasar la corriente máxima de salida. Todo lo dicho se reere al trabajo con una temperatura ambiente de 20°C.
Caja
Especicaciones técnicas 3_0208T108
Tiny Data MF (USB)
Tensión de salida Registro de datos Potencia (60% del tiempo ON) conformidad con ISO 12176-2 Rango de temperaturas Protección Clase de aplicación Conformidad con Clase ISO 12176-2 - clasicación
8 a 48 DC
General
Sí 2050 W (55.9 A) -10 a +50 [°C] IP54
(escaneo opcional) SmartFuse/(FUSAMATIC) Entrada manual del código del
accesorio Entrada manual de parámetros de soldadura Entrada manual de parámetros de soldadura Entrada/Red eléctrica Tensión Tensión nominal Rango de tensión nominal
(tolerancia) Frecuencia nominal
Tipo Dimensiones
soldadura para unos 1000 ciclos.
Embalaje Flightcase 500 × 420 × 385 [mm] 8 [kg] 24 [kg]
AC
Datos accesorio
230 [V] 185 a 300 [V]
Datos del
Tensión Tensión de salida Corriente de salida (max.) Corriente de salida (t ∞) Corriente de salida (min.) Ajuste de energía
AC 8 a 48 [V] 110 [A] 30 [A] 2 [A] Compensación de temperatura 4 [m], otras longitudes a pedido Fijo 4.0 [mm] (opcional 4.7 [mm])
Tensión de entrada Tensión de salida
Corriente, Frecuencia Corriente, Resistencia, Contacto, Cortocircuito
Otro
Sistema, Temperatura de trabajo, Servicio Texto, Señal acústica
Mensajes de error
La soldadora Tiny Data MF (USB) proporciona el registro de datos de
Datos generales Hora, fecha, número de informe, temperatura ambiente
Euro plug
Funciones de monitorización
325 × 275 × 290 [mm]
Sí, UOUT: 8 a 48 V, tWELD: 0 a 9999 s No, UOUT: 48V (prejado), tWELD: 0 a 9999 s
Tipo de enchufe
Terminales de soldadura
16.5 [kg]
Peso del embalaje
0.6 a 0.9 (control de desfase) 16 [A] 3200 [VA] 5 [m]
Montaje del cable de soldadura
4 × 20 caracteres (alfanuméricos), iluminación de fondo 14 [kg]
Sí Sí
(Tolerancia) Factor de potencia cos ρ Corriente nominal Consumo eléctrico Longitud del cable
Longitud del cable de soldadura
Dimensiones Long x An x Alt
Sí
50 [Hz] 40 a 70 [Hz]
→
Peso del producto (sin cable de soldadura) Peso del producto (cable de soldadura incluido)
Registro de datos
Rango de frecuencia nominal
Salida
Placa de acero
1 CE P2 3 U S1 V AK D X
Entrada de parámetros de soldadura Código de barras con lector
Material Pantalla
Peso para el transporte
Datos registrados Datos de fusión
Tensión, corriente, consumo, duración del proceso (nominal y real), Hora, modo, resistencia, mensajes de error con 10 valores de tensión y corriente Código de barras (ISO/TR 13950), T ipo, Dimensión,
Fabricante Nº de serie, Nº de inventario, Fecha del último servicio, dispositivo Horas de trabajo, Conguración del sistema Código operador (PF o ISO 12176-3) identicación personal y acceso a la conguración del sistema
Funciones de rastreo Código
encargo y Nº (máximo 40 caracteres) ingreso por código de barras o
Código operador Número Sold. Código soldadura Rastreo código accesorio Rastreo código tubo 1 Rastreo código tubo 2 Rastreo código 3 / Infotext
manual ISO-1276-3 DVS 2207 / 2208 ISO-TR 13950 ISO-12176-4 ISO-12176-4 ISO-12176-4 ISO-12176-4 / 40 caracteres
Ciclo de servicio conformidad con ISO 12176-2 a 30%, 60% y 100%, Duración test t = 60 minutos Duración test 60 min
Potencia de salida a UOUT = 36 V
Potencia de salida a UOUT = 40 V
Corriente de salida IOUT
30% 60% 100%
2700 W 2050 W 1600 W
3000 W 2250 W 1800 W
74.1 A 55.9 A 44.7 A
49
Soldadoras S o
Digimatic Data (USB)
l
Rango de aplicación
d
Las soldadoras de electrofusión del tipo Digimatic Data (USB) están exclusivamente destinadas a la soldadura de tubos termoplásticos (o sea de PE-HD, PE80, PE100 o PP) con accesorios de menos de 48V en su voltaje de entrada. Estos dispositivos cumplen las especicaciones de las normativas DVS 2208-1 e ISO-12176-2, de las cuales derivan las normas aplicables a los equipos de electrofusión.
a d o r a s
3.0206.001
Rango de dimensiones El rango de dimensiones de los accesorios para los cuales puede utilizarse una soldadora depende en primer lugar del consumo de energía de los accesorios. Dado que el consumo no es uniforme para todos los fabricantes, no es posible generalizar, y en caso de duda, es preciso examinar cada accesorio por separado. Para las soldadoras del tipo Digimatic Data (USB), y suponiendo que todas las operaciones de soldadura se realizan en secuencia, es decir que la soldadora tiene tiempo para enfriarse mientras se prepara el accesorio siguiente, se podría emitir la siguiente declaración general: Sin limitaciones para el uso con accesorios de 20 a 355 mm. Al trabajar con dimensiones a partir de los 400 mm se requieren periodos más prolongados de enfriamiento, porque de otro modo podría aparecer el mensaje de error "Device too hot" (Dispositivo recalentado). En tal caso será preciso dejar que el equipo se enfríe antes de volver a utilizarlo. Antes de procesar accesorios dentro
de este rango de dimensiones es necesario comprobar que la demanda de corriente del accesorio no sobrepase constantemente la corriente de salida del dispositivo, y tener cuidado de no sobrepasar la corriente máxima de salida. Todo lo dicho se reere al trabajo con una temperatura ambiente de 20°C.
Caja
Especicaciones técnicas 3_0206_001
General
Tensión de salida Registro de datos Potencia (60% del tiempo ON) conformidad con ISO 12176-2 Rango de temperaturas Protección Clase de aplicación Conformidad con Clase ISO 12176-2 - clasicación
Digimatic Data (USB)
Material
Placa de acero con recubrimiento plástico
8 a 48 DC [V]
Pantalla
4 × 20 caracteres (alfanuméricos), iluminación de fondo 16 [kg]
Sí 2050 W (55.9 A) -10 a +50 [°C] IP54
1 CE P2 3 U S1 V AK D X
Entrada de parámetros de soldadura Código de barras con lector
(escaneo opcional) SmartFuse/(FUSAMATIC) Entrada manual del código del
accesorio Entrada manual de parámetros de soldadura Entrada manual de parámetros de soldadura Entrada/Red eléctrica Tensión Tensión nominal Rango de tensión nominal
(tolerancia) Frecuencia nominal
No Opcional No No, UOUT: 8 a 48 V, tWELD: 0 a 9999 s Sí, UOUT: 48V (prejado), tWELD: 0 a 9999 s
Registro de datos Embalaje Tipo Dimensiones
0.6 a 0.9 (control de desfase) 16 [A] 3600 [VA] 4.5 [m]
Tipo de enchufe
Euro plug
Tensión Tensión de salida Corriente de salida (max.) Corriente de salida (t ∞) Corriente de salida (min.) Ajuste de energía
AC
Salida
→
Longitud del cable de soldadura Montaje del cable de soldadura
Terminales de soldadura Adaptadores opcionales para terminales
Flightcase
Peso del embalaje
Datos registrados
8 a 48 [V] 110 [A] 30 [A] 2 [A] Compensación de temperatura 5 [m], otras longitudes a pedido Fijo 4 [mm] 4 to 4.7 [mm]
Funciones de monitorización Tensión de entrada Tensión de salida
Corriente, Frecuencia Corriente, Resistencia Contacto, Cortocircuito
Otro
Sistema, Temperatura de trabajo, Servicio Texto, Señal acústica
500 × 420 × 385 [mm] 8 [kg] 24 [kg]
Datos generales Hora, fecha, número de informe, temperatura
Datos del dispositivo
(Tolerancia) Factor de potencia cos ρ Consumo eléctrico Power consumption Longitud del cable
450 × 325 × 380 [mm]
datos de soldadura para unos 250 ciclos.
Datos de fusión
230 [V] 185 a 300 [V]
18 [kg]
La soldadora del tipo Digimatic Data (USB) proporciona el registro de
AC
50 [Hz] 40 a 70 [Hz]
Mensajes de error
Dimensiones Long x An x Alt
Peso para el transporte
Rango de frecuencia nominal
50
Peso del producto (sin cable de soldadura) Peso del producto (cable de soldadura incluido)
ambiente, nombre del soldador, Nº encargo max. 20 caracteres (alfanuméricos) Tensión, corriente, consumo, duración del proceso (nominal y real) Hora, modo, resistencia, mensajes de error con 10 valores de tensión y corriente Nº de serie, Nº de inventario, Fecha del último servicio, Horas de trabajo, Conguración del sistema
Ciclo de servicio conformidad con ISO 12176-2 a 30%, 60% y 100%, Duración test t = 60 minutos Duración test 60 min
Potencia de salida a UOUT = 36 V
Potencia de salida a UOUT = 40 V
Corriente de salida IOUT
30% 60% 100%
2700 W 2050 W 1600 W
3000 W 2250 W 1800 W
74.1 A 55.9 A 44.7 A
Soldadoras S
PolyControl Plus (USB) V2.0
3F0218V112
Soldadora universal
o
Rango de aplicación
l
Las soldadoras de electrofusión del tipo PolyControl Plus (USB) V2.0 están exclusivamente destinadas a la soldadura de tubos termoplásticos (o sea de PE-HD, PE80, PE100 o PP) con accesorios de menos de 48V en su voltaje de entrada. Estos dispositivos cumplen las especicaciones de las normativas DVS 2208-1 e ISO-12176-2, de las cuales derivan las normas aplicables a los equipos de electrofusión.
d a d
Rango de dimensiones El rango de dimensiones de los accesorios para los cuales puede utilizarse una soldadora depende en primer lugar del consumo de energía de los accesorios. Dado que el consumo no es uniforme para todos los fabricantes, no es posible generalizar, y en caso de duda, es preciso examinar cada accesorio por separado. Para las soldadoras del tipo PolyControl Plus (USB) V2.0, y suponiendo que todas las operaciones de soldadura se realizan en secuencia, es decir que la soldadora tiene tiempo para enfriarse mientras se prepara el accesorio siguiente, se podría emitir la siguiente declaración general: Utilizable sin limitaciones para todas las dimensiones de accesorios con hasta 85 A de consumo permanente de corriente. Todo lo dicho se reere al trabajo con una temperatura ambiente de 20°C. Nota: Si el ventilador de la parte trasera de la soldadora no etá funcionando, el rango de tamaños se reduce a lo siguiente: hasta 250 mm sin limitaciones, de 280 a 400 mm con periodos de enfriamiento. No debe utilizarse la soldadora sin el ventilador para tamaños de más de 400 mm a n de evitar que el dispositivo resulte dañado.
PolyControl Plus (USB) V2.0
General
Tensión de salida Registro de datos Potencia (60% del tiempo ON) conformidad con ISO 12176-2 Rango de temperaturas Protección Clase de aplicación Conformidad con Clase ISO 12176-2 - clasicación
(escaneo opcional) SmartFuse/(FUSAMATIC) Entrada manual del código del
accesorio Entrada manual de parámetros de soldadura Entrada manual de parámetros de soldadura Entrada/Red eléctrica Tensión Tensión nominal Rango de tensión nominal
(tolerancia) Frecuencia nominal
3600 W (100 A) -10 a +50 [°C] IP54
Sí
Embalaje
Sí Sí Sí, UOUT: 8 a 48 V, tWELD: 0 a 9999 s No, UOUT: 48V (prejado), tWELD: 0 a 9999 s 230 [V] 185 a 300 [V]
Euro plug
Tensión Tensión de salida Corriente de salida (max.) Corriente de salida (t ∞) Corriente de salida (min.) Ajuste de energía
DC
Funciones de monitorización
Datos registrados Datos de fusión
8 a 48 [V] 110 [A] 85 [A] 2 [A] Compensación de temperatura, Compensación de inductividad 3 [m] Fijo 4.0 [mm] (opcional 4.7 [mm])
Corriente, Frecuencia Corriente, Resistencia, Contacto, Cortocircuito
Otro
Sistema, Temperatura de trabajo, Servicio Texto, Señal acústica
Aluminio de fundición 4 × 20 caracteres (alfanuméricos), iluminación de fondo 11 [kg] 15.5 [kg] 220 × 317 × 435 [mm]
500 × 420 × 385 [mm] 8 [kg] 24 [kg]
Tensión, corriente, consumo, duración del proceso (nominal y real) Hora, modo, resistencia, mensajes de error con 10 valores de tensión y corriente Código de barras (ISO/TR 13950), T ipo, Dimensión,
Fabricante Datos del
Nº de serie, Nº de inventario, Fecha del último servicio, dispositivo Horas de trabajo, Conguración del sistema Código de barras (PF o ISO 12176-3) identicación personal y acceso a del operador entrada manual y conguración del sistema
Funciones de rastreo Nº encargo (código del trabajo)
Tensión de entrada Tensión de salida
Mensajes de error
s
Flightcase
Peso del embalaje
Datos accesorio
Tipo de enchufe
Terminales de soldadura
Tipo Dimensiones
AC
1 - PFC (EN 61000-3-3) 16 [A] 3600 [VA] 4.5 [m]
Montaje del cable de soldadura
a
La soldadora PolyControl Plus (USB) V2.0 proporciona el registro de datos de soldadura para unos 1000 ciclos y datos de rastreo de conformidad con la norma ISO-12176-4:
Peso para el transporte
(Tolerancia) Factor de potencia cos ρ Corriente nominal Consumo eléctrico Longitud del cable
Longitud del cable de soldadura
Dimensiones Long x An x Alt
Registro de datos
50 [Hz] 40 a 70 [Hz]
→
Peso del producto (sin cable de soldadura) Peso del producto (cable de soldadura incluido)
1 CE P2 4 U S1 V AK D X
Rango de frecuencia nominal
Salida
Material Pantalla
8 a 48 DC [V]
Sí
Entrada de parámetros de soldadura Código de barras con lector
r
Caja
Especicaciones técnicas 3F0218V112
o
Código operador Número Sold. Código soldadura Rastreo código accesorio Rastreo código tubo 1 Rastreo código tubo 2 Rastreo código 3 / Infotext
Max. 40 caracteres (alfanuméricos) por código de barras
ISO-12176-3 DVS 2207 / 2208 ISO-TR 13950 ISO-12176-4 ISO-12176-4 ISO-12176-4 ISO-12176-4 / 40 caracteres
Ciclo de servicio conformidad con ISO 12176-2 a 30%, 60% y 100%, Duración test t = 60 minutos Duración test 60 min
Potencia de salida a UOUT = 36 V
Potencia de salida a UOUT = 40 V
Corriente de salida IOUT
30% 60% 100%
3960 W 3600 W 3240 W
4400 W 4000 W 3600 W
110 A 100 A 90 A
51
I n s t a l l a t i o n To o l s / H e r r a m i e n t a s d e i n s t a l a c i ó n I n s t
Extension Key for Tapping Valve Liave de Extensión para Toma de Servicio Con Válvula 49546010
0.8 - 1.1mm
l
49546020
1.0 - 1.4mm
l
49546030
1.2 - 1.8mm
a
a t i o n
Key for Tapping Saddle Liave para Toma de Servicio
T o
29202000
18cm
o l s / H e r
Hand Scrappers Raspatubos Manual 29145.3002.001
1.1/2”
29145.3002.003
2.1/2”
r a m i
Rotational Scraper Tools Raspatubos Giratorios
e n t a s d e
i n
29144.4200.001 29144.4200.002 29144.4200.003 29144.4200.014
25-63mm
29175160 29170315 29170710
50-160mm
29144.4200.009
250-800mm
25-110mm 90-225mm 90-315mm
75-315mm 355-710mm
s t a l a c i
Plasson Scraper Tool for Pipe Ends Raspatubos Giratorio Plasson
ó n
52
2912020063
20-63mm
29144.4200.015
75-180mm
29144.4200.016
180-400mm
2912450800
450-800mm
I n s t a l l a t i o n To o l s / H e r r a m i e n t a s d e i n s t a l a c i ó n I
Pipe Cutter
n
Cortadores de Tuberia
s t
29145.3000.005
42mm
a l l a
29145.3000.007
63mm, One-Hand Operaion
t i o n
29145.3000.001
63mm T o o
Rotational Pipe Cutter (S-Type) Cortador de TuberÍa Giratorio (Tipo S) 29145.3001.004
20-75mm
29145.3001.001
50-140mm
29145.3001.002
90-160mm
l s / H e r r
Rotational Pipe Cutters Cortador de TuberÍa Giratorio
a m i
29144.4400.002
32-110mm
29144.4400.001
110-225mm
e n t a s
Pipe Clamping Tools
d
Herramientas de Sujeción de Tubos
e
i
29144.4300.006
20-63mm
n s
29144.4300.001
32-110mm
29144.4300.002
110-225mm
t a l a
29144.4300.021
250-630mm
c i ó
29144.4300.016
63-200mm
29363180
63-180mm
29363110
63-110mm
n
53
I n s t a l l a t i o n To o l s / H e r r a m i e n t a s d e i n s t a l a c i ó n I n s
Squeeze - Off Tools Prensatubos
t a l
29144.4100.001
20-63mm SDR11
a
29144.4100.002
63mm SDR11
t
29144.4100.003
75-200mm
l
i o n
T o
Rounding Rings Redondeadores
o l s
29600040
40mm
29600050
50mm
29145.3006.063
65mm
29145.3006.075
75mm
/ H e r
29145.3006.090
90mm
a
29145.3006.110
110mm
m
29145.3006.125
125mm
i
29145.3006.160
160mm
e
29145.3006.180
180mm
n
29145.3006.200
200mm
t
29145.3006.225
225mm
a
29600250
250mm
r
s d e
i
Detergents Detergentes
n s t a
29145.2000.001
Tangit Detergent, 1 Liter
29145.2000.002
100 Cleaning Pads with Tangit
l a c i ó n
Markers Marcadores
29145.3100.018 29145.3100.019 2960003
54
Plasson Marking Pen, White, 10 pcs Plasson Marking Pen, silver, 10 pcs Plasson Marking Pen, silver, 10 pcs
I n s t a l l a t i o n To o l s / H e r r a m i e n t a s d e i n s t a l a c i ó n I
Rounding Tool Redondeador hidráulico
n s t a
29144.4702.000
Rounding Tool 450-800 Hydraulic Redondeador hidráulico 450-800
l l a t
Tools for Branch Saddle & Transition Saddle sizes: 250-800 (See pages 19,20) Herramientas para collarines de derivación y transición. Tamaños: 250-800 (ver páginas 19 y 20)
29144.4702.000
Core Drill Kit for Plasson-Saddle Outlet 90mm/110mm/125mm/160mm
i o n
T o
Juego de punzones para collarines de Plasson 90mm/110mm/125mm/160mm
o l s
29144.4701.001
Large Bore Saddle Clamp 250-800mm – Complete Kit Presilla de sujeción para collarines 250-800 mm - Juego completo
/ H e r
Tools for Wastewater Saddles (See Pages 34-35) Herramientas para enlaces para aguas residuales (ver páginas 34-35)
r a m i e
29144.4700.001
Drilling And Clamping Tools (set) for Wastewater Branch Saddle 160 mm Juego de herramientas de perforación y sujeción para collarines de derivación para aguas residuales 160 mm
n t a s d
29070050
Cutting and Clamping Tools for 45º Wastewater Saddle 110Mm
e
Herramientas de corte y sujeción para collarines de 45º para aguas residuales 110 mm i n s t a l a c i ó n
55