Underwater Technology Services (s) Pte Ltd.
35 Pioneer Road, Unit J8 Singapore 628503 Telephone: +65 6 861 8006 Facsimile : +65 6 863 2865
[email protected]
30Te HYDRAULIC WINCH
1.
30Te Winch – 1 unit of 30Te Hydraulic winch c/w HPU & constant tension, as per attached drawings UTS/010/01/001-P.
2.
Load Cell - Line / Load Indicator housed in a IP65 stainless steel panel come with digital read out (2) in metric ton for Load, meter for Length and graphic bar for Total Load.
3.
Wire rope to be spooled onto UTS 30Te winch – 1 length of 44mm x 400m long, 6x36 IWRC, Galvanized steel wire rope. One end thimble, other end plain, c /w in-house test certificate.
UTS 30 Te Winch Spec Sheet
S/N 1
DESCRIPTION 30 TON HYDRAULIC WINCH
1 UNIT
LAYER
LINE PULL(TON)
LINE SPEED ( M/MIN )
WIRE ROPE ON DRUM (M)
1
62
12
4.2
2
55
14
96.4
3
49
15
153.8
4
44
17
217.2
5
41
18
286.7
6
37
20
362.3
7
34
22
444
8
32
23
531.7
9
30
25
625.5
WINCH CONTROL:
MANUAL CONTROL VALVE
BRAKE:
FAIL SAFE HYDRAULIC RELEASE DISC ON MOTOR ( BRAKE CAPACITY: 150% OF RATED LINE PULL)
FEATURES:
CROSS OVER RELIEF FOR OVERPRESSURE PROTECTION BAND BRAKE
DIMENSION LBH:
APPROX. 3.0M X 2.6M X 2.1M METERS
MAX. WORKING PRESSURE
3500 PSI
LINE PULL @ 3500 PSI
62.3 TON @ 1 LAYER
ST
40.5 TON @ 5
LAYER
30.0 TON @ 9
LAYER
LINE SPEED
10M/MIN @ 89GPM (1
LAYER / BARE DRUM)
NUMBER OF LAYERS
9 LAYERS
WIRE ROPE DIAMETER
Ø 44 MM
WIRE ROPE LENGHT
600 METER
DRIVE TYPE
SINGLE DRUM WITH SPUR GEAR DRIVEN BY SINGLE AXIAL MOTOR WITH PLANETARY GEAR REDUCER
BRAKE
FAIL SAFE HYDRAULIC-RELEASE DISC BRAKE ON HYDRAULIC MOTOR AND FAIL SAFE BAND BRAKE ON DRUM
FEATURE
CROSS-OVER RELIEF FOR OVERPRESSURE PRODUCTION
WEIGHT
APPROX. 9 TON WITHOUT WIRE ROPE, 14 TON WITH WIRE ROPE
DRUM DIMENSION
DIA609MM X 1016MM WIDE X DIA 1625MM FLANGE
WINCH TYPE:
SINGLE DRUM WITH SPUR GEAR DRIVEN BY SINGLE AXIAL MOTOR WITH PLANETARY GEAR REDUCER
SPECIFICATIONS DIESEL ENGINE DIESEL ENGINE
: :
WORKING PRESSURE SYSTEM FLOW RATE OIL TANK CAPACITY DIESEL TANK CAPACITY DRY WEIGHT UTS SERIAL NO.
: : : : : :
PRIME HORSE POWER INPUT 215HP @1800RPM VARIABLE DISPLACEMENT AXIAL PISTON CLOSED LOOP AND OPEN LOOP PUMP 2800 PSI 118 GPM 200 GAL 200 GAL APPROX. 5.5 TON DHPP-W003-UTS
278Hp Hydraulic Power pack
GA DRAWING
