1. Print all pages on standard printer paper. It is important that you set your printer preference to print full size. These documents are sized to t most printers’ print areas. Measure the 3 ″ x 3″ square on the next page to determine the print accuracy. 2. Using the templates on the rst two pages, align the registration marks which appear on the adjoining pages. 3. Tape the pages together keeping the registration marks aligned. 4. Cut out your pattern pieces. Once you have aligned the pages together to create the pattern pieces, ignore the circle/crosshair registration markings and cut right through it as necessary. 5. Dashed lines around edges are to denote the edge of the printed area. You You may choose to trim the pages to these lines if your paper is too thick to see through. Find the split registration marks on adjoining pattern pages and align them until they form a whole pattern.