2016 -Farécla Trade Product Catalogue A4 ENG.pdf

PRODUCT CATALOGUE

1

2

   D    N    A    H    Y    B

   d    n    a    S    G   :    e   v    i    s    a    r    b    a    n    a    e    s    o    o    h    C

G Sand Abrasives

G Sand 75mm Abrasive Film Discs

Abrasive discs, sheets and accesories

by machine Sizes & P Grades P1200 x 50 discs P1500 x 50 discs P2000 x 50 discs

The Farécla Abrasives Range has been developed to oer solutions for fast, effective defect removal and preparation prior to the compounding process. W ith outstanding performance and a long life, these products provide an even and consistent scratch pattern with a universal attachment system allowing easy compatibility with multiple systems. The range caters for all paint systems, with Blending discs, P1200, P1500 and P2000 grades available for Medium and High Solids and P3000 for fully cured Ultra High Solids and Scratch Resistant Clearcoats.

Codes GSD712 GSD715 GSD720

Qty. 8 8 8

G Sand 75mm (P3000) Abrasive Foam Discs by machine Sizes & P Grades 75mm P3000 x 30 discs

Codes GS3701

   E    N    I    H    C    A    M    Y    B

   d    n    a    S    G   :    e   v    i    s    a    r    b    a    n    a    e    s    o    o    h    C

Qty. 8

G Sand 150mm Abrasive Film Discs by machine

G Sand Waterproof Sheets 9” x 5.5” (230mm x 140mm) - by hand Sizes & P Grades P1500 x 50 sheets P2000 x 50 sheets

Codes GSW115 GSW120

Sizes & P Grades P1000 (Blending) x 50 sheets P1200 x 50 sheets P1500 x 50 sheets P2000 x 50 sheets

Qty. 10 10

Use With G Sand Flatting Block GSA012

Codes GSD110 GSD712 GSD715 GSD720

Qty. 8 8 8

Use With G Sand Universal Back Up Pad GSA101 G Sand 150mm Interface Pad GSA106

G Sand Denibbing Roses 35mm roses for dust inclusions - by hand Sizes & P Grades P2000 x 100 roses

Code GSD320

G Sand 150mm (P3000) Abrasive Foam Discs

Qty. 12

by machine Sizes & P Grades 150mm P3000 x 10 discs

Use With G Sand Denibbing Block GSA301

Codes GS3101

Qty. 8

3

4

   d    n   u    o    p    m    o    C    T    U    C   :    1    e    g    a    t    s    a    e    s    o    o    h    C

G3 Premium

G3 Regular Grade

Abrasive Compound

Paste Compound • Reliable Cut - Removes P1500 or finer

• For use on all paint types including the

abrasive marks quickly and easily

very latest energy or ‘hyper’ clearcoats

• Permanent results fast - No fillers

• Long lasting, powerful cut

• High Gloss System - Excellent gloss. Can be used

• Permanent results fast - No fillers

with G3 Fine Finishing Compou nd for an enhanced

• No dragging, staining or hazing o n fresh paints

gloss finish on dark colours

• No dusting o r splatter. Exceptionally easy and

• Silicone Free - 100% paintshop safe

quick to wipe off

Sizes 500g 1kg

Codes G3P506 G3P101

Qty 12 6

• Can be used by machine or hand

ALL PAINT TYPES

DRY USE

NO FILLERS

Use With

Codes G3-250 G3-400 G3-1000 G3-3000

Qty 24 12 12 4

MS PAINTS

WE T U S E

NO FILLERS

Use With

G Mop Yellow Compounding Foam GMC312 (3” / 75mm) GMC612 (6” / 150mm) GMC812 (8” / 220mm)

G Mop Back Plate with Yellow Interface for 6” Pads GMB614  (14mm thread) GMB658  (5/8” thread) GMB616  (16mm thread)

G Mop Flexible Back Plate for 8” Pads GMB814  (14mm thread) GMB858  (5/8” thread) GMB816  (16mm thread)

How To Use

Shak Sh ake e wel welll

Sizes 250g 400g 1kg 3kg

G Mop Wet Use Compounding Foam GMC606 (6” / 150mm) GMC806 (8” / 220mm)

G Mop Back Plate with Yellow Interface for 6” Pads GMB614  (14mm thread) GMB658  (5/8” thread) GMB616  (16mm thread)

G Mop Flexible Back Plate for 8” Pads GMB814  (14mm thread) GMB858  (5/8” thread) GMB816  (16mm thread)

How To Use

Apply Appl y a sm smal alll amount of product

Attach the foam and prime

Spread then compound at 900 - 1300rpm

Wipe clean with a Cloth

Spray area and pad with water

Apply a small Spread then amount of compound at product 1500 - 1800rpm

Keep lubricated

Wipe clean with a Cloth

   d    n   u    o    p    m    o    C    T    U    C   :    1    e    g    a    t    s    a    e    s    o    o    h    C

3

4

   d    n   u    o    p    m    o    C    T    U    C   :    1    e    g    a    t    s    a    e    s    o    o    h    C

G3 Premium

G3 Regular Grade

Abrasive Compound

Paste Compound • Reliable Cut - Removes P1500 or finer

• For use on all paint types including the

abrasive marks quickly and easily

very latest energy or ‘hyper’ clearcoats

• Permanent results fast - No fillers

• Long lasting, powerful cut

• High Gloss System - Excellent gloss. Can be used

• Permanent results fast - No fillers

with G3 Fine Finishing Compou nd for an enhanced

• No dragging, staining or hazing o n fresh paints

gloss finish on dark colours

• No dusting o r splatter. Exceptionally easy and

• Silicone Free - 100% paintshop safe

quick to wipe off

Sizes 500g 1kg

Codes G3P506 G3P101

Qty 12 6

• Can be used by machine or hand

ALL PAINT TYPES

NO FILLERS

DRY USE

Use With

Codes G3-250 G3-400 G3-1000 G3-3000

Qty 24 12 12 4

MS PAINTS

NO FILLERS

WE T U S E

Use With

G Mop Yellow Compounding Foam GMC312 (3” / 75mm) GMC612 (6” / 150mm) GMC812 (8” / 220mm)

G Mop Back Plate with Yellow Interface for 6” Pads GMB614  (14mm thread) GMB658  (5/8” thread) GMB616  (16mm thread)

G Mop Flexible Back Plate for 8” Pads GMB814  (14mm thread) GMB858  (5/8” thread) GMB816  (16mm thread)

How To Use

Shak Sh ake e wel welll

Sizes 250g 400g 1kg 3kg

   d    n   u    o    p    m    o    C    T    U    C   :    1    e    g    a    t    s    a    e    s    o    o    h    C

G Mop Wet Use Compounding Foam GMC606 (6” / 150mm) GMC806 (8” / 220mm)

G Mop Back Plate with Yellow Interface for 6” Pads GMB614  (14mm thread) GMB658  (5/8” thread) GMB616  (16mm thread)

G Mop Flexible Back Plate for 8” Pads GMB814  (14mm thread) GMB858  (5/8” thread) GMB816  (16mm thread)

How To Use

Apply Appl y a sm smal alll amount of product

Attach the foam and prime

Spread then compound at 900 - 1300rpm

Wipe clean with a Cloth

Spray area and pad with water

Apply a small Spread then amount of compound at product 1500 - 1800rpm

Keep lubricated

Wipe clean with a Cloth

5

6

   d    n   u    o    p    m    o    C    H    S    I    N    I    F   :    2    e    g    a    t    s    a    e    s    o    o    h    C

G3 Premium

G3 Fine

Abrasive Compound

Finishing Compound

• For use on all paint types including the

• Quickly removes P3000 or finer sanding marks

very latest energy or ‘hyper’ clearcoats

• Swirls and holograms are eliminated permanently

• Long lasting, powerful cut

• Restores lightly oxidised paint work and dull surfaces

• Permanent results fast - No fillers

• Can be used by machine with foam or lambs wool

• No dragging, staining or hazing o n fresh paints

applicator as well as by hand

• No dusting o r splatter. Exceptionally easy and

• Easy clean up, minimal splatter or dusting

quick to wipe off

Sizes 500g 1kg

Codes G3P506 G3P101

Qty 12 6

ALL PAINT TYPES

DRY USE

NO FILLERS

Use With

Codes G3F501 G3F101 G3F118

Qty 12 6 2

ALL PAINT TYPES

HAND OR MACHINE

SWIRL REMOVAL

Use With

G Mop Finishing Foam GMF301  (3” / 75mm) GMF601  (6” / 150mm) GMF801 (8” / 220mm)

G Mop Back Plate with Yellow Interface for 6” Pads GMB614  (14mm thread) GMB658  (5/8” thread) GMB616  (16mm thread)

G Mop Flexible Back Plate for 8” Pads GMB814  (14mm thread) GMB858  (5/8” thread) GMB816  (16mm thread)

How To Use

Shak Sh ake e wel welll

Sizes 500ml 1 ltr 1 US gallon

G Mop Finishing Foam GMF301 (3” / 75mm) GMF601 (6” / 150mm) GMF801(8” / 220mm)

G Mop Back Plate with Yellow Interface for 6” Pads GMB614  (14mm thread) GMB658  (5/8” thread) GMB616  (16mm thread)

G Mop Flexible Back Plate for 8” Pads GMB814  (14mm thread) GMB858  (5/8” thread) GMB816  (16mm thread)

How To Use

Apply Appl y a sm smal alll amount of product

Attach the foam and prime

Spread then compound at 800 - 1100rpm

Wipe clean with a Cloth

Apply a small Compound Shake well, amount of slowly - 1000rpm then prime the pad product to 2000rpm

DO NOT ALLOW TO DRY

Wipe clean with a Cloth

   d    n   u    o    p    m    o    C    H    S    I    N    I    F   :    2    e    g    a    t    s    a    e    s    o    o    h    C

5

6

   d    n   u    o    p    m    o    C    H    S    I    N    I    F   :    2    e    g    a    t    s    a    e    s    o    o    h    C

G3 Premium

G3 Fine

Abrasive Compound

Finishing Compound

• For use on all paint types including the

• Quickly removes P3000 or finer sanding marks

very latest energy or ‘hyper’ clearcoats

• Swirls and holograms are eliminated permanently

• Long lasting, powerful cut

• Restores lightly oxidised paint work and dull surfaces

• Permanent results fast - No fillers

• Can be used by machine with foam or lambs wool

• No dragging, staining or hazing o n fresh paints

applicator as well as by hand

• No dusting o r splatter. Exceptionally easy and

• Easy clean up, minimal splatter or dusting

quick to wipe off

Sizes 500g 1kg

Codes G3P506 G3P101

Qty 12 6

ALL PAINT TYPES

NO FILLERS

DRY USE

Use With

Codes G3F501 G3F101 G3F118

Qty 12 6 2

ALL PAINT TYPES

HAND OR MACHINE

SWIRL REMOVAL

Use With

G Mop Finishing Foam GMF301  (3” / 75mm) GMF601  (6” / 150mm) GMF801 (8” / 220mm)

G Mop Back Plate with Yellow Interface for 6” Pads GMB614  (14mm thread) GMB658  (5/8” thread) GMB616  (16mm thread)

G Mop Flexible Back Plate for 8” Pads GMB814  (14mm thread) GMB858  (5/8” thread) GMB816  (16mm thread)

How To Use

Shak Sh ake e wel welll

Sizes 500ml 1 ltr 1 US gallon

   d    n   u    o    p    m    o    C    H    S    I    N    I    F   :    2    e    g    a    t    s    a    e    s    o    o    h    C

G Mop Finishing Foam GMF301 (3” / 75mm) GMF601 (6” / 150mm) GMF801(8” / 220mm)

G Mop Back Plate with Yellow Interface for 6” Pads GMB614  (14mm thread) GMB658  (5/8” thread) GMB616  (16mm thread)

G Mop Flexible Back Plate for 8” Pads GMB814  (14mm thread) GMB858  (5/8” thread) GMB816  (16mm thread)

How To Use

Apply Appl y a sm smal alll amount of product

Attach the foam and prime

Spread then compound at 800 - 1100rpm

Wipe clean with a Cloth

Apply a small Compound Shake well, amount of slowly - 1000rpm then prime the pad product to 2000rpm

DO NOT ALLOW TO DRY

Wipe clean with a Cloth

7

8

   d    i   u    q    i    L    T    C    E    T    O    R    P   :    3    e    g    a    t    s    a    e    s    o    o    h    C

G3 Glaze

G3 Wax

Gloss Enhancer

Premium Liquid Protection • Provides a superior gloss finish on all types

• Provides added shine quickly with no

of fully cured paintwork

need to re-apply, saving time and money

• Viscous formulation spreads easily providing a thick

• Eliminate minor swirls and holograms from all paint

protective coating that won’t dry out on the

systems to ensure a flawless finish

surface and buffs off quickly • Does not dry out in use in direct sunlight so it can be

• Durable and water-repellent that allows fresh paint to breathe

applied outside • Lasts up to 3 months for a longer lasting protection

Sizes 500ml 1 ltr 1 US gallon

Codes G3G501 G3G101 G3G118

Qty 12 6 2

ALL PAINT TYPES

BY MACHINE OR HAND

FRESH PAINT

Use With

Codes G3W501 G3W106 G3W118

Qty 12 6 2

ALL PAINT TYPES

BY HAND OR MACHINE

FULLY CURED PAINT

Use With

G Mop Finishing Foam GMF301  (3” / 75mm) GMF601  (6” / 150mm) GMF801 (8” / 220mm)

G Mop Back Plate with Yellow Interface for 6” Pads GMB614  (14mm thread) GMB658  (5/8” thread) GMB616  (16mm thread)

Farécla Finishing Cloth (lint-free mircofibre) FC-3 (3 pack)

How To Use

Shak Sh ake e wel welll

Sizes 500ml 1 ltr 1 US gallon

Farécla Finishing Cloth (lint-free mircofibre) FC-3 (3 pack)

G Mop Finishing Foam GMF301  (3” / 75mm) GMF601  (6” / 150mm) GMF801 (8” / 220mm)

G Mop Back Plate with Yellow Interface for 6” Pads GMB614  (14mm thread) GMB658  (5/8” thread) GMB616  (16mm thread)

How To Use

Apply Appl y a sm smal alll amount of product

Attach the foam and prime

Spread then compound at 800 - 1100rpm

Wipe clean with a Cloth

Shake well

Apply a small amount of product

Rub on with a Finishing Cloth

Allow to dry to a haze

Wipe clean with a clean, dry Cloth

   d    i   u    q    i    L    T    C    E    T    O    R    P   :    3    e    g    a    t    s    a    e    s    o    o    h    C